On Intel machines, the msvc compiler defines the CPU architecture
macros _M_IX86 and _M_X64 (equivalent to __i386__ and __x86_64__
respectively). Use these macros in the pre-processor expression
to select the "fast" definition of the {get,put}_be32() macros.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, using the normal (or production) compiler
warning level (-W3), msvc complains as follows:
.../sha1.c(244) : warning C4018: '<' : signed/unsigned mismatch
.../sha1.c(270) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
.../sha1.c(271) : warning C4244: 'function' : conversion from \
'unsigned __int64' to 'unsigned long', possible loss of data
Note that gcc issues a similar complaint about line 244 when
compiling with -Wextra.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They are both slower than the new BLK_SHA1 implementation, so it is
pointless to keep them around.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this, the code should now be portable to any C compiler.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We rely on ntohl() and htonl() to perform byte swapping in many places.
However, some platforms have libraries providing really poor
implementations of those which might cause significant performance
issues, especially with the block-sha1 code.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a 64-bit value, hence having it first provides a better
alignment.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some compilers produce errors when arithmetic is attempted on pointers to
void. We want computations done on byte addresses, so cast them to char *
to work them around.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to X86, PowerPC and S390 are capable of unaligned memory
accesses.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed on architectures with poor or non-existent unaligned memory
support and/or no fast byte swap instruction (such as ARM) by using byte
accesses to memory and shifting the result together.
This also makes the code portable, therefore the byte access methods are
the defaults. Any architecture that properly supports unaligned word
accesses in hardware simply has to enable the alternative methods.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to make it easier for them to be selected individually depending
on the architecture instead of the other way around i.e. having each
architecture select a list of hacks up front. That makes for clearer
documentation as well.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the code around so specific architecture hacks are defined first.
Also make one line comments actually one line. No code change.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For x86 performance (especially in 32-bit mode) I added that hack to write
the SHA1 internal temporary hash using a volatile pointer, in order to get
gcc to not try to cache the array contents. Because gcc will do all the
wrong things, and then spill things in insane random ways.
But on architectures like PPC, where you have 32 registers, it's actually
perfectly reasonable to put the whole temporary array[] into the register
set, and gcc can do so.
So make the 'volatile unsigned int *' cast be dependent on a
SMALL_REGISTER_SET preprocessor symbol, and enable it (currently) on just
x86 and x86-64. With that, the routine is fairly reasonable even when
compared to the hand-scheduled PPC version. Ben Herrenschmidt reports on
a G5:
* Paulus asm version: about 3.67s
* Yours with no change: about 5.74s
* Yours without "volatile": about 3.78s
so with this the C version is within about 3% of the asm one.
And add a lot of commentary on what the heck is going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think I have found a way to avoid the gcc crazyness.
Lookie here:
# TIME[s] SPEED[MB/s]
rfc3174 5.094 119.8
rfc3174 5.098 119.7
linus 1.462 417.5
linusas 2.008 304
linusas2 1.878 325
mozilla 5.566 109.6
mozillaas 5.866 104.1
openssl 1.609 379.3
spelvin 1.675 364.5
spelvina 1.601 381.3
nettle 1.591 383.6
notice? I outperform all the hand-tuned asm on 32-bit too. By quite a
margin, in fact.
Now, I didn't try a P4, and it's possible that it won't do that there, but
the 32-bit code generation sure looks impressive on my Nehalem box. The
magic? I force the stores to the 512-bit hash bucket to be done in order.
That seems to help a lot.
The diff is trivial (on top of the "rename registers with cpp" patch), as
appended. And it does seem to fix the P4 issues too, although I can
obviously (once again) only test Prescott, and only in 64-bit mode:
# TIME[s] SPEED[MB/s]
rfc3174 1.662 36.73
rfc3174 1.64 37.22
linus 0.2523 241.9
linusas 0.4367 139.8
linusas2 0.4487 136
mozilla 0.9704 62.9
mozillaas 0.9399 64.94
that's some really impressive improvement. All from just saying "do the
stores in the order I told you to, dammit!" to the compiler.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of letting the compiler to figure out the optimal way to rotate
register usage, explicitly rotate the register names with cpp.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
.. and simplify the ctx->size logic.
We now count the size in bytes, which means that 'lenW' was always just
the low 6 bits of the total size, so we don't carry it around separately
any more. And we do the 'size in bits' shift at the end.
Suggested by Nicolas Pitre and linux@horizon.com.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's an equivalent expression, but the '+' gives us some freedom in
instruction selection (for example, we can use 'lea' rather than 'add'),
and associates with the other additions around it to give some minor
scheduling freedom.
Suggested-by: linux@horizon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid repeating the shared parts of the different rounds by adding a
macro layer or two. It was already more cpp than C.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mozilla-SHA1 code did this 80-word array for the 80 iterations. But
the SHA1 state is really just 512 bits, and you can actually keep it in
a kind of "circular queue" of just 16 words instead.
This requires us to do the xor updates as we go along (rather than as a
pre-phase), but that's really what we want to do anyway.
This gets me really close to the OpenSSL performance on my Nehalem.
Look ma, all C code (ok, there's the rol/ror hack, but that one doesn't
strictly even matter on my Nehalem, it's just a local optimization).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps a teeny bit. But what I -really- want to do is to avoid the
whole 80-array loop, and do the xor updates as I go along..
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bert Wesarg noticed non-x86 version of SHA_ROT() had a typo.
Also spell in-line assembly as __asm__(), otherwise I seem to get
error: implicit declaration of function 'asm' from my compiler.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the one with the smaller constant. It _can_ generate slightly
smaller code (a constant of 1 is special), but perhaps more importantly
it's possibly faster on any uarch that does a rotate with a loop.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Undo the change I picked up from the mailing list discussion suggested
by Nico, not because it is wrong, but it will be done at the end of the
follow-up series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on the mozilla SHA1 routine, but doing the input data accesses a
word at a time and with 'htonl()' instead of loading bytes and shifting.
It requires an architecture that is ok with unaligned 32-bit loads and a
fast htonl().
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones
Nicolas Pitre
Brandon Casey
Linus Torvalds
Junio C Hamano