Built-in fsmonitor (part 1).
* jh/builtin-fsmonitor-part1:
t/helper/simple-ipc: convert test-simple-ipc to use start_bg_command
run-command: create start_bg_command
simple-ipc/ipc-win32: add Windows ACL to named pipe
simple-ipc/ipc-win32: add trace2 debugging
simple-ipc: move definition of ipc_active_state outside of ifdef
simple-ipc: preparations for supporting binary messages.
trace2: add trace2_child_ready() to report on background children
Create "child_ready" event to capture the state of a child process
created in the background.
When a child command is started a "child_start" event is generated in
the Trace2 log. For normal synchronous children, a "child_exit" event
is later generated when the child exits or is terminated. The two events
include information, such as the "child_id" and "pid", to allow post
analysis to match-up the command line and exit status.
When a child is started in the background (and may outlive the parent
process), it is not possible for the parent to emit a "child_exit"
event. Create a new "child_ready" event to indicate whether the
child was successfully started. Also include the "child_id" and "pid"
to allow similar post processing.
This will be used in a later commit with the new "start_bg_command()".
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be useful to tell who invoked Git - was it invoked manually by a
user via CLI or script? By an IDE? In some cases - like 'repo' tool -
we can influence the source code and set the GIT_TRACE2_PARENT_SID
environment variable from the caller process. In 'repo''s case, that
parent SID is manipulated to include the string "repo", which means we
can positively identify when Git was invoked by 'repo' tool. However,
identifying parents that way requires both that we know which tools
invoke Git and that we have the ability to modify the source code of
those tools. It cannot scale to keep up with the various IDEs and
wrappers which use Git, most of which we don't know about. Learning
which tools and wrappers invoke Git, and how, would give us insight to
decide where to improve Git's usability and performance.
Unfortunately, there's no cross-platform reliable way to gather the name
of the parent process. If procfs is present, we can use that; otherwise
we will need to discover the name another way. However, the process ID
should be sufficient to look up the process name on most platforms, so
that code may be shareable.
Git for Windows gathers similar information and logs it as a "data_json"
event. However, since "data_json" has a variable format, it is difficult
to parse effectively in some languages; instead, let's pursue a
dedicated "cmd_ancestry" event to record information about the ancestry
of the current process and a consistent, parseable way.
Git for Windows also gathers information about more than one generation
of parent. In Linux further ancestry info can be gathered with procfs,
but it's unwieldy to do so. In the interest of later moving Git for
Windows ancestry logging to the 'cmd_ancestry' event, and in the
interest of later adding more ancestry to the Linux implementation - or
of adding this functionality to other platforms which have an easier
time walking the process tree - let's make 'cmd_ancestry' accept an
array of parentage.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To pave the way for non-Windows platforms to define
trace2_collect_process_info(), reorganize the stub-or-definition schema
to something which doesn't directly reference Windows.
Platforms which want to collect parent process information in the
future should:
1. Add an implementation to compat/ (e.g. compat/somearch/procinfo.c)
2. Add that object to COMPAT_OBJS to config.mak.uname
(e.g. COMPAT_OBJS += compat/somearch/procinfo.o)
3. Define HAVE_PLATFORM_PROCINFO in config.mak.uname
In the Windows case, this definition lives in
compat/win32/trace2_win32_process_info.c, which is already conditionally
added to COMPAT_OBJS; so let's add HAVE_PLATFORM_PROCINFO to hint to the
build that compat/stub/procinfo.c should not be used.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a public wrapper, trace2_session_id(), around tr2_sid_get(), which
is intended to be private trace2 implementation.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Via trace2, Git can already log interesting config parameters (see the
trace2_cmd_list_config() function). However, this can grant an
incomplete picture because many config parameters also allow overrides
via environment variables.
To allow for more complete logs, we add a new trace2_cmd_list_env_vars()
function and supporting implementation, modeled after the pre-existing
config param logging implementation.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the functions documentation from
Documentation/technical/api-trace2.txt to trace2.h as it's easier for the
developers to find the usage information beside the code instead of looking
for it in another doc file.
Only the functions documentation section is removed from
Documentation/technical/api-trace2.txt as the file is full of
details that seemed more appropriate to be in a separate doc file
as it is, with a link to the doc file added in the trace2.h.
Also the functions doc is removed to avoid having redundandt info which
will be hard to keep syncronized with the documentation in the header file.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
Teach Windows version of git to report peak memory usage
during exit() processing.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the system and global config files for
default Trace2 settings. This allows system-wide Trace2 settings to
be installed and inherited to make it easier to manage a collection of
systems.
The original GIT_TR2* environment variables are loaded afterwards and
can be used to override the system settings.
Only the system and global config files are used. Repo and worktree
local config files are ignored. Likewise, the "-c" command line
arguments are also ignored. These limits are for performance reasons.
(1) For users not using Trace2, there should be minimal overhead to
detect that Trace2 is not enabled. In particular, Trace2 should not
allocate lots of otherwise unused data strucutres.
(2) For accurate performance measurements, Trace2 should be initialized
as early in the git process as possible, and before most of the normal
git process initialization (which involves discovering the .git directory
and reading a hierarchy of config files).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create trace2_initialize_clock() and call from main() to capture
process start time in isolation and before other sub-systems are
ready.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some compilers don't allow NULL to be passed for a va_list,
and e.g. "gcc (Raspbian 6.3.0-18+rpi1+deb9u1) 6.3.0 20170516"
errors out like this:
trace2/tr2_tgt_event.c:193:18:
error: invalid operands to binary &&
(have ‘int’ and ‘va_list {aka __va_list}’)
if (fmt && *fmt && ap) {
^^
I couldn't find any hints that va_list and pointers can be mixed,
and no hints that they can't either. Morten Welinder comments:
"C99, Section 7.15, simply says that va_list "is an object type suitable for
holding information needed by the macros va_start, va_end, and
va_copy". So clearly not guaranteed to be mixable with pointers...
The portable solution is to use "va_list" everywhere in the callchain.
As a consequence, both trace2_region_enter_fl() and trace2_region_leave_fl()
now take a variable argument list.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add platform-specific interface to log information about the current
process.
On Windows, this interface is used to indicate whether the git process
is running under a debugger and list names of the process ancestors.
Information for other platforms is left for a future effort.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Elijah Newren
Jeff Hostetler
Emily Shaffer
Josh Steadmon
Heba Waly
SZEDER Gábor
Torsten Bögershausen