strbuf_readlink() refuses to read link targets that exceed PATH_MAX (even
if a sufficient size was specified by the caller).
As some platforms support longer paths, remove this restriction (similar
to strbuf_getcwd()).
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() calls readlink() twice if the hint argument specifies the
exact size of the link target (e.g. by passing stat.st_size as returned by
lstat()). This is necessary because 'readlink(..., hint) == hint' could
mean that the buffer was too small.
Use hint + 1 as buffer size to prevent this.
Signed-off-by: Karsten Blees <blees@dcon.de>
With the recent update in efee955 (gpg-interface: check gpg signature
creation status, 2016-06-17), we ask GPG to send all status updates to
stderr, and then catch the stderr in an strbuf.
But GPG might fail, and send error messages to stderr. And we simply
do not show them to the user.
Even worse: this swallows any interactive prompt for a passphrase. And
detaches stderr from the tty so that the passphrase cannot be read.
So while the first problem could be fixed (by printing the captured
stderr upon error), the second problem cannot be easily fixed, and
presents a major regression.
So let's just revert commit efee9553a4.
This fixes https://github.com/git-for-windows/git/issues/871
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To support Git Bash running in a MinTTY, we use a dirty trick to access
the MSYS2 pseudo terminal: we execute a Bash snippet that accesses
/dev/tty.
The idea was to fall back to writing to/reading from CONOUT$/CONIN$ if
that Bash call failed because Bash was not found.
However, we should fall back even in other error conditions, because we
have not successfully read the user input. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Accessing the Windows console through the special CONIN$ / CONOUT$ devices
doesn't work properly for non-ASCII usernames an passwords.
It also doesn't work for terminal emulators that hide the native console
window (such as mintty), and 'TERM=xterm*' is not necessarily a reliable
indicator for such terminals.
The new shell_prompt() function, on the other hand, works fine for both
MSys1 and MSys2, in native console windows as well as mintty, and properly
supports Unicode. It just needs bash on the path (for 'read -s', which is
bash-specific).
On Windows, try to use the shell to read from the terminal. If that fails
with ENOENT (i.e. bash was not found), use CONIN/OUT as fallback.
Note: To test this, create a UTF-8 credential file with non-ASCII chars,
e.g. in git-bash: 'echo url=http://täst.com > cred.txt'. Then in git-cmd,
'git credential fill <cred.txt' works (shell version), while calling git
without the git-wrapper (i.e. 'mingw64\bin\git credential fill <cred.txt')
mangles non-ASCII chars in both console output and input.
Signed-off-by: Karsten Blees <blees@dcon.de>
The `git_terminal_prompt()` function expects the terminal window to be
attached to a Win32 Console. However, this is not the case with terminal
windows other than `cmd.exe`'s, e.g. with MSys2's own `mintty`.
Non-cmd terminals such as `mintty` still have to have a Win32 Console
to be proper console programs, but have to hide the Win32 Console to
be able to provide more flexibility (such as being resizeable not only
vertically but also horizontally). By writing to that Win32 Console,
`git_terminal_prompt()` manages only to send the prompt to nowhere and
to wait for input from a Console to which the user has no access.
This commit introduces a function specifically to support `mintty` -- or
other terminals that are compatible with MSys2's `/dev/tty` emulation. We
use the `TERM` environment variable as an indicator for that: if the value
starts with "xterm" (such as `mintty`'s "xterm_256color"), we prefer to
let `xterm_prompt()` handle the user interaction.
The most prominent user of `git_terminal_prompt()` is certainly
`git-remote-https.exe`. It is an interesting use case because both
`stdin` and `stdout` are redirected when Git calls said executable, yet
it still wants to access the terminal.
When running inside a `mintty`, the terminal is not accessible to the
`git-remote-https.exe` program, though, because it is a MinGW program
and the `mintty` terminal is not backed by a Win32 console.
To solve that problem, we simply call out to the shell -- which is an
*MSys2* program and can therefore access `/dev/tty`.
Helped-by: nalla <nalla@hamal.uberspace.de>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A ton of Git commands simply do not read (or at least parse) the core.*
settings. This is not good, as Git for Windows relies on the
core.longPaths setting to be read quite early on.
So let's just make sure that all commands read the config and give
platform_core_config() a chance.
This patch teaches tons of Git commands to respect the config setting
`core.longPaths = true`, including `pack-refs`, thereby fixing
https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, added support for
chdir(), etc]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a problem in the way 9ac3f0e5b3 (pack-objects: fix
performance issues on packing large deltas, 2018-07-22) initializes that
mutex in the `packing_data` struct. The problem manifests in a
segmentation fault on Windows, when a mutex (AKA critical section) is
accessed without being initialized. (With pthreads, you apparently do
not really have to initialize them?)
This was reported in https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We already avoid traversing NTFS junction points in `git clean -dfx`.
With this topic branch, we do that when the FSCache is enabled, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When updating the skip-worktree bits in the index to align with new
values in a sparse-checkout file, Git scans the entire working
directory with lstat() calls. In a sparse-checkout, many of these
lstat() calls are for paths that do not exist.
Enable the fscache feature during this scan.
In a local test of a repo with ~2.2 million paths, updating the index
with `git read-tree -m -u HEAD` with a sparse-checkout file containing
only `/.gitattributes` improved from 2-3 minutes to 15-20 seconds.
More work could be done to stop running lstat() calls when recursing
into directories that are known to not exist.
This brings substantial wins in performance because the FSCache is now
per-thread, being merged to the primary thread only at the end, so we do
not have to lock (except while merging).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `git clean` command needs to enumerate plenty of files and
directories, and can therefore benefit from the FSCache.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When FSCache is active, we can cache the reparse tag and use it directly
to determine whether a path refers to an NTFS junction, without any
additional, costly I/O.
Note: this change only makes a difference with the next commit, which
will make use of the FSCache in `git clean` (contingent on
`core.fscache` set, of course).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We will use this in the next commit to implement an FSCache-aware
version of is_mount_point().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When updating the skip-worktree bits in the index to align with new
values in a sparse-checkout file, Git scans the entire working
directory with lstat() calls. In a sparse-checkout, many of these
lstat() calls are for paths that do not exist.
Enable the fscache feature during this scan. Since enable_fscache()
calls nest, the disable_fscache() method decrements a counter and
would only clear the cache if that counter reaches zero.
In a local test of a repo with ~2.2 million paths, updating the index
with git read-tree -m -u HEAD with a sparse-checkout file containing
only /.gitattributes improved from 2-3 minutes to ~6 seconds.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Using FindFirstFileExW() requires the OS to allocate a 64K buffer for each
directory and then free it when we call FindClose(). Update fscache to call
the underlying kernel API NtQueryDirectoryFile so that we can do the buffer
management ourselves. That allows us to allocate a single buffer for the
lifetime of the cache and reuse it for each directory.
This change improves performance of 'git status' by 18% in a repo with ~200K
files and 30k folders.
Documentation for NtQueryDirectoryFile can be found at:
https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/content/ntifs/nf-ntifs-ntquerydirectoryfilehttps://docs.microsoft.com/en-us/windows/desktop/FileIO/file-attribute-constantshttps://docs.microsoft.com/en-us/windows/desktop/fileio/reparse-point-tags
To determine if the specified directory is a symbolic link, inspect the
FileAttributes member to see if the FILE_ATTRIBUTE_REPARSE_POINT flag is
set. If so, EaSize will contain the reparse tag (this is a so far
undocumented feature, but confirmed by the NTFS developers). To
determine if the reparse point is a symbolic link (and not some other
form of reparse point), test whether the tag value equals the value
IO_REPARSE_TAG_SYMLINK.
The NtQueryDirectoryFile() call works best (and on Windows 8.1 and
earlier, it works *only*) with buffer sizes up to 64kB. Which is 32k
wide characters, so let's use that as our buffer size.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The recent change to make fscache thread specific relied on fscache_enable()
being called first from the primary thread before being called in parallel
from worker threads. Make that more robust and protect it with a critical
section to avoid any issues.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Now that the fscache is single threaded, take advantage of the mem_pool as
the allocator to significantly reduce the cost of allocations and frees.
With the reduced cost of free, in future patches, we can start freeing the
fscache at the end of commands instead of just leaking it.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Track fscache hits and misses for lstat and opendir requests. Reporting of
statistics is done when the cache is disabled for the last time and freed
and is only reported if GIT_TRACE_FSCACHE is set.
Sample output is:
11:33:11.836428 compat/win32/fscache.c:433 fscache: lstat 3775, opendir 263, total requests/misses 4052/269
Signed-off-by: Ben Peart <benpeart@microsoft.com>
The threading model for fscache has been to have a single, global cache.
This puts requirements on it to be thread safe so that callers like
preload-index can call it from multiple threads. This was implemented
with a single mutex and completion events which introduces contention
between the calling threads.
Simplify the threading model by making fscache thread specific. This allows
us to remove the global mutex and synchronization events entirely and instead
associate a fscache with every thread that requests one. This works well with
the current multi-threading which divides the cache entries into blocks with
a separate thread processing each block.
At the end of each worker thread, if there is a fscache on the primary
thread, merge the cached results from the worker into the primary thread
cache. This enables us to reuse the cache later especially when scanning for
untracked files.
In testing, this reduced the time spent in preload_index() by about 25% and
also reduced the CPU utilization significantly. On a repo with ~200K files,
it reduced overall status times by ~12%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Update enable_fscache() to take an optional initial size parameter which is
used to initialize the hashmap so that it can avoid having to rehash as
additional entries are added.
Add a separate disable_fscache() macro to make the code clearer and easier
to read.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Add tracing around initializing and discarding mempools. In discard report
on the amount of memory unused in the current block to help tune setting
the initial_size.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
At the end of the status command, disable and free the fscache so that we
don't leak the memory and so that we can dump the fscache statistics.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Use FindFirstFileExW with FindExInfoBasic to avoid forcing NTFS to look up
the short name. Also switch to a larger (64K vs 4K) buffer using
FIND_FIRST_EX_LARGE_FETCH to minimize round trips to the kernel.
In a repo with ~200K files, this drops warm cache status times from 3.19
seconds to 2.67 seconds for a 16% savings.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
On file systems that support it, this can dramatically speed up operations
like add, commit, describe, rebase, reset, rm that would otherwise have to
lstat() every file to "re-match" the stat information in the index to that
of the file system.
On a synthetic repo with 1M files, "git reset" dropped from 52.02 seconds to
14.42 seconds for a savings of 72%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
This is retry of #1419.
I added flush_fscache macro to flush cached stats after disk writing
with tests for regression reported in #1438 and #1442.
git checkout checks each file path in sorted order, so cache flushing does not
make performance worse unless we have large number of modified files in
a directory containing many files.
Using chromium repository, I tested `git checkout .` performance when I
delete 10 files in different directories.
With this patch:
TotalSeconds: 4.307272
TotalSeconds: 4.4863595
TotalSeconds: 4.2975562
Avg: 4.36372923333333
Without this patch:
TotalSeconds: 20.9705431
TotalSeconds: 22.4867685
TotalSeconds: 18.8968292
Avg: 20.7847136
I confirmed this patch passed all tests in t/ with core_fscache=1.
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
When I do git fetch, git call file stats under .git/objects for each
refs. This takes time when there are many refs.
By enabling fscache, git takes file stats by directory traversing and that
improved the speed of fetch-pack for repository having large number of
refs.
In my windows workstation, this improves the time of `git fetch` for
chromium repository like below. I took stats 3 times.
* With this patch
TotalSeconds: 9.9825165
TotalSeconds: 9.1862075
TotalSeconds: 10.1956256
Avg: 9.78811653333333
* Without this patch
TotalSeconds: 15.8406702
TotalSeconds: 15.6248053
TotalSeconds: 15.2085938
Avg: 15.5580231
Signed-off-by: Takuto Ikuta <tikuta@chromium.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Fix regression described in:
https://github.com/git-for-windows/git/issues/1392
which was introduced in:
b2353379bb
Problem Symptoms
================
When the user has a .gitignore file that is a symlink, the fscache
optimization introduced above caused the stat-data from the symlink,
rather that of the target file, to be returned. Later when the ignore
file was read, the buffer length did not match the stat.st_size field
and we called die("cannot use <path> as an exclude file")
Optimization Rationale
======================
The above optimization calls lstat() before open() primarily to ask
fscache if the file exists. It gets the current stat-data as a side
effect essentially for free (since we already have it in memory).
If the file does not exist, it does not need to call open(). And
since very few directories have .gitignore files, we can greatly
reduce time spent in the filesystem.
Discussion of Fix
=================
The above optimization calls lstat() rather than stat() because the
fscache only intercepts lstat() calls. Calls to stat() stay directed
to the mingw_stat() completly bypassing fscache. Furthermore, calls
to mingw_stat() always call {open, fstat, close} so that symlinks are
properly dereferenced, which adds *additional* open/close calls on top
of what the original code in dir.c is doing.
Since the problem only manifests for symlinks, we add code to overwrite
the stat-data when the path is a symlink. This preserves the effect of
the performance gains provided by the fscache in the normal case.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Make fscache_enabled() function public rather than static.
Remove unneeded fscache_is_enabled() function.
Change is_fscache_enabled() macro to call fscache_enabled().
is_fscache_enabled() now takes a pathname so that the answer
is more precise and mean "is fscache enabled for this pathname",
since fscache only stores repo-relative paths and not absolute
paths, we can avoid attempting lookups for absolute paths.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach "add" to use preload-index and fscache features
to improve performance on very large repositories.
During an "add", a call is made to run_diff_files()
which calls check_remove() for each index-entry. This
calls lstat(). On Windows, the fscache code intercepts
the lstat() calls and builds a private cache using the
FindFirst/FindNext routines, which are much faster.
Somewhat independent of this, is the preload-index code
which distributes some of the start-up costs across
multiple threads.
We need to keep the call to read_cache() before parsing the
pathspecs (and hence cannot use the pathspecs to limit any preload)
because parse_pathspec() is using the index to determine whether a
pathspec is, in fact, in a submodule. If we would not read the index
first, parse_pathspec() would not error out on a path that is inside
a submodule, and t7400-submodule-basic.sh would fail with
not ok 47 - do not add files from a submodule
We still want the nice preload performance boost, though, so we simply
call read_cache_preload(&pathspecs) after parsing the pathspecs.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
If multiple threads access a directory that is not yet in the cache, the
directory will be loaded by each thread. Only one of the results is added
to the cache, all others are leaked. This wastes performance and memory.
On cache miss, add a future object to the cache to indicate that the
directory is currently being loaded. Subsequent threads register themselves
with the future object and wait. When the first thread has loaded the
directory, it replaces the future object with the result and notifies
waiting threads.
Signed-off-by: Karsten Blees <blees@dcon.de>
Teach read_directory_recursive() and add_excludes() to
be aware of optional fscache and avoid trying to open()
and fstat() non-existant ".gitignore" files in every
directory in the worktree.
The current code in add_excludes() calls open() and then
fstat() for a ".gitignore" file in each directory present
in the worktree. Change that when fscache is enabled to
call lstat() first and if present, call open().
This seems backwards because both lstat needs to do more
work than fstat. But when fscache is enabled, fscache will
already know if the .gitignore file exists and can completely
avoid the IO calls. This works because of the lstat diversion
to mingw_lstat when fscache is enabled.
This reduced status times on a 350K file enlistment of the
Windows repo on a NVMe SSD by 0.25 seconds.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Karsten Blees
Johannes Schindelin
Doug Kelly
Derrick Stolee
Derrick Stolee
Ben Peart
Takuto Ikuta
Jeff Hostetler