Currently, we don't check refs_hash_size size and happily call
lookup_object_refs() even if refs_hash_size is zero which leads to
a division by zero in hash_obj().
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If match is "", match[-1] is accessed. Let pathspec_matches return 1 in that
case indicating that "" matches everything.
Incidently this fixes git-grep'ing in ".".
Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we did not consider untracked working tree files
"precious", but we have always considered them fair game to
clobber. These days, branch switching by read-tree is more
careful and tries to protect untracked working tree files. This
caused the following workflow to stop working:
git checkout one-branch-with-file-F
git checkout -f another-without-file-F
git pull . one-branch-with-file-F
Because the second checkout leaves F from the previous state as
untracked file in the working tree, the merge would fail, trying
to protect F from being clobbered.
This changes "git checkout -f" to remove working tree files that
are known to git in the switched-from state but do not exist in
the switched-to state, borrowing the same logic from "reset --hard".
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we run git-daemon from inetd, even with the --verbose option, it
doesn't log the peer address. That logic was only in the standalone
daemon code -- move it to the execute() function instead. Tested with
both IPv6 and Legacy IP clients, in both inetd and daemon mode.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When tracking directories with nearly all of its files at
the most nested levels, --rmdir would accidentally go too
far when deleting.
Of course, we'll add a test for this condition, too.
Makefile: automatically run new tests as they appear in t/
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reformats the change 621c53cc08
introduced to match what upstream author implemented in libxdiff-0.21
without changing any logic (hopefully ;-). This is to help keep
us in sync with the upstream.
Signed-off-by: Junio C Hamano <junkio@cox.net>
There seems to be at least one implementation of Perl which requires the
user to specify an extension for backup files.
Reported by Alex Riesen.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a simple specialized object allocator for basic
objects.
This avoids wasting space with malloc overhead (metadata and
extra alignment), since the specialized allocator knows the
alignment, and that objects, once allocated, are never freed.
It also allows us to track some basic statistics about object
allocations. For example, for the mozilla import, it shows
object usage as follows:
blobs: 627629 (14710 kB)
trees: 1119035 (34969 kB)
commits: 196423 (8440 kB)
tags: 1336 (46 kB)
and the simpler allocator shaves off about 2.5% off the memory
footprint off a "git-rev-list --all --objects", and is a bit
faster too.
[ Side note: this concludes the series of "save memory in object storage".
The thing is, there simply isn't much more to be saved on the objects.
Doing "git-rev-list --all --objects" on the mozilla archive has a final
total RSS of 131498 pages for me: that's about 513MB. Of that, the
object overhead is now just 56MB, the rest is going somewhere else (put
another way: the fact that this patch shaves off 2.5% of the total
memory overhead, considering that objects are now not much more than 10%
of the total shows how big the wasted space really was: this makes
object allocations much more memory- and time-efficient).
I haven't looked at where the rest is, but I suspect the bulk of it is
just the pack-file loading. It may be that we should pack the tree
objects separately from the blob objects: for git-rev-list --objects, we
don't actually ever need to even look at the blobs, but since trees and
blobs are interspersed in the pack-file, we end up not being dense in
the tree accesses, so we end up looking at more pages than we strictly
need to.
So with a 535MB pack-file, it's entirely possible - even likely - that
most of the remaining RSS is just the mmap of the pack-file itself. We
don't need to map in _all_ of it, but we do end up mapping a fair
amount. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The PPC SHA1 routine had an overflow which meant that it gave
incorrect results for input buffers >= 512MB. This fixes it by
ensuring that the update of the total length in bits is done using
64-bit arithmetic.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These two tests assume that "sed" will not modify the final line of a
stream if it does not end with a newline character. The assumption is
not true at least for FreeBSD and Solaris 9. FreeBSD's "sed" appends
a newline character; "sed" in Solaris 9 even removes the incomplete
final line. This patch makes the test use perl instead.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" to the absolutely minimal size possible.
It now contains /only/ the object flags and the SHA1 hash name of the
object.
The "refs" field, which is really needed only for fsck, is maintained in
a separate hashed lookup-table, allowing all normal users to totally
ignore it.
This helps memory usage, although not as much as I hoped: it looks like
the allocation overhead of malloc (and the alignment constraints in
particular) means that while the structure size shrinks, the actual
allocation overhead mostly does not.
[ That said: memory usage is actually down, but not as much as it should
be: I suspect just one of the object types actually ended up shrinking
its effective allocation size.
To get to the next level, we probably need specialized allocators that
don't pad the allocation more than necessary. ]
The separation makes for some code cleanup, though, and makes the ref
tracking that fsck wants a clearly separate thing.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-tar-tree adds an extended pax header to archives if its first
parameter points to a commit. It confuses older tars and isn't
very useful in the case of git anyway, so stop doing it.
Idea: Junio, implementation: Junio. I just wrote it up. :-)
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noticed by Florian Forster: Use a char pointer when adding offsets,
because void pointer arithmetic is a GNU extension. Const'ify the
function arguments while we're at it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* add example on how to avoid adding a global extended pax header
* don't mention linux anymore, use git itself as an example instead
* update to v1.4.0 ;-)
* append missing :: to the examples
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We can write the trailer in one or at most two steps; it will always
fit within two blocks. With the last caller of get_record() gone we
can get rid of it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Detect changed prefix and/or changed build flags in the middle
of the build (or between 'make' and 'make install'), and if change
is detected, make sure all objects are compiled with same build
flags and same prefix, thus avoiding inconsistent/broken build.
[jc: removed otherwise unnecessary Makefile target to test the
change this patch introduces. ]
Signed-off-by: Yakov Lerner <iler.ml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-format-patch was converted to a builtin an appropriate call
to setup_ident was missed and thus git-format-patch -s fails because
it doesn't look up anything in the password file.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is really the dregs of my effort to not waste memory in git-rev-list,
and makes barely one percent of a difference in the memory footprint, but
hey, it's also a pretty small patch.
It discards the parent lists and the commit buffer after the commit has
been shown by git-rev-list (and "git log" - which already did the commit
buffer part), and frees the commit list entry that was used by the
revision walker.
The big win would be to get rid of the "refs" pointer in the object
structure (another 5%), because it's only used by fsck. That would require
some pretty major surgery to fsck, though, so I'm timid and did the less
interesting but much easier part instead.
This (percentually) makes a bigger difference to "git log" and friends,
since those are walking _just_ commits, and thus the list entries tend to
be a bigger percentage of the memory use. But the "list all objects" case
does improve too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Every single user actually wanted this only for commit objects, and we
have no reason to waste space on it for other object types. So just move
the structure member from the low-level "struct object" into the "struct
commit".
This leaves the commit object the same size, and removes one unnecessary
pointer from all other object allocations.
This shrinks memory usage (still at a fairly hefty half-gig, admittedly)
of "git-rev-list --all --objects" on the mozilla repo by another 5% in my
tests.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was pointed out that the current behaviour might mispart a patch comment
so remove this behaviour for now.
[jc: this fixes "From: line in the middle" check in t5100 test.]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently the test passes with 1.3.3 but not with the tip of
"master". This is to verify the fixes from Eric W Biedermann.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of "diff" (e.g. on FreeBSD and older Linux systems) do
not support the "\ No newline at end of file" remark and are not
able to generate the patches needed for this test. This lets the
test fail, although git-apply is working perfectly. This patch adds
the pre-generated patches to t/t4100/ and makes the test use them.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This does:
- add a "rev.simplify_history" flag which defaults to on
- it turns it off for "git whatchanged" (which thus now has real
semantics outside of "git log")
- it adds a command line flag ("--full-history") to turn it off for
others (ie you can make "git log" and "gitk" etc get the semantics if
you want to.
Now, just as an example of _why_ you really really really want to simplify
history by default, apply this patch, install it, and try these two
command lines:
gitk --full-history -- git.c
gitk -- git.c
and compare the output.
So with this, you can also now do
git whatchanged -p -- gitweb.cgi
git log -p --full-history -- gitweb.cgi
and it will show the old history of gitweb.cgi, even though it's not
relevant to the _current_ state of the name "gitweb.cgi"
NOTE NOTE NOTE! It will still actually simplify away merges that didn't
change anything at all into either child. That creates these bogus strange
discontinuities if you look at it with "gitk" (look at the --full-history
gitk output for git.c, and you'll see a few strange cases).
So the whole "--parent" thing ends up somewhat bogus with --full-history
because of this, but I'm not sure it's worth even worrying about. I don't
think you'd ever want to really use "--full-history" with the graphical
representation, I just give it as an example exactly to show _why_ doing
so would be insane.
I think this is trivial enough and useful enough to be worth merging into
the stable branch.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since `git-annotate' is an expensive operation to run it may be
desirable to deactivate this functionality. This patch introduces
the `gitweb.blame' option to git-repo-config and disables the blame
support by default.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds an interface for `git-blame' to `gitweb.cgi'.
Links to it are placed in `git_blob'.
Internally the code uses `git-annotate' because `git-blame's output
differs for files that have been renamed in the past. However, I like
the term `blame' better.
[jc: blame can be told to produce the compatible format btw...]
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch we have a speedup and much lower IO when
importing trees with many branches. Instead of forcing
index re-population for each branch switch, we keep
many index files around, one per branch.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We now capture the output of cvsps to a tempfile, and then read it in.
cvsps 2.1 works quite a bit "in memory", and only prints its patchset
info once it has finished talking with cvs, but apparently retaining
all that memory allocation. With this patch, cvsps is finished and
reaped before cvsimport start working (and growing). So the footprint
of the whole process is much lower.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsps output often contains references to CVSPS_NO_BRANCH, commits
that it could not trace to a branch. Ignore that branch.
Additionally, cvsps will sometimes draw circular relationships
between branches -- where two branches are recorded as opening
from the other. In those cases, and where the ancestor branch
hasn't been seen, ignore it.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fix the usage string and clean up the docs while we are at it
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When extra command line arguments are given to a command that
was alias-expanded, the code generated a wrong argument list,
leaving the original alias in the result, and forgetting to
terminate the new argv list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
P4import currently creates a git tag for every commit it imports.
When importing from a large repository too many tags can be created
for git to manage, so this provides an option to shut that feature
off if necessary.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
* git://git.bogomips.org/git-svn: (25 commits)
git-svn: rebuild convenience and bugfixes
git-svn: svn (command-line) 1.0.x compatibility
git-svn: tests no longer fail if LC_ALL is not a UTF-8 locale
git-svn: bugfix and optimize the 'log' command
git-svn: Eliminate temp file usage in libsvn_get_file()
git-svn: fix several small bugs, enable branch optimization
git-svn: avoid creating some small files
git-svn: make the $GIT_DIR/svn/*/revs directory obsolete
git-svn: add support for Perl SVN::* libraries
git-svn: add 'log' command, a facsimile of basic `svn log'
git-svn: add UTF-8 message test
git-svn: add some functionality to better support branches in svn
git-svn: add --shared and --template= options to pass to init-db
git-svn: add --repack and --repack-flags= options
git-svn: minor cleanups, extra error-checking
git-svn: Move all git-svn-related paths into $GIT_DIR/svn
git-svn: support manually placed initial trees from fetch
git-svn: optimize --branch and --branch-all-ref
git-svn: --branch-all-refs / -B support
git-svn: support -C<num> passing to git-diff-tree
...
We will now automatically fetch the refs/remotes/git-svn ref
from origin and store a Pull: line for it.
--remote=<origin> may be passed if your remote is named something
other than 'origin'
Also, remember to make GIT_SVN_DIR whenever we need to create
.rev_db
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Tested on a plain Ubuntu Warty installation
using subversion 1.0.6-1.2ubuntu3
svn add --force was never needed, as it only affected
directories, which git (thankfully) doesn't track
The 1.0.x also didn't support symlinks(!), so allow NO_SYMLINK
to be defined for running tests
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Revisions with long commit messages were being skipped, since
the 'git-svn-id' metadata line was at the end and git-log uses a
32k buffer to print the commits.
Also the last 'git-svn-id' metadata line in a commit is always
the valid one, so make sure we use that, as well.
Made the verbose flag work by passing the correct option switch
('--summary') to git-log.
Finally, optimize -r/--revision argument handling by passing
the appropriate limits to revision
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means we'll have a loose object when we encounter a symlink
but that's not the common case.
We also don't have to worry about svn:eol-style when using the
SVN libraries, either. So remove the code to deal with that.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Share the repack counter between branches when doing
multi-fetch.
Pass the -d flag to git repack by default. That's the
main reason we will want automatic pack generation, to
save space and improve disk cache performance. I won't
add -a by default since it can generate extremely large
packs that make RAM-starved systems unhappy.
We no longer generate the .git/svn/$GIT_SVN_ID/info/uuid
file, either. It was never read in the first place.
Check for and create .rev_db if we need to during fetch (in case
somebody manually blew away their .rev_db and wanted to start
over. Mainly makes debugging easier).
Croak with $? instead of $! if there's an error closing pipes
Quiet down some of the chatter, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Andre Noll
Uwe Zeisberger
Junio C Hamano
David Woodhouse
Eric Wong
Dennis Stosberg
Linus Torvalds
Paul Mackerras
Rene Scharfe
Yakov Lerner
Eric W. Biederman
Jakub Narebski
Sven Verdoolaege
Peter Eriksen
Florian Forster
Martin Langhoff
Fredrik Kuivinen
Sean