Teach the "debug" helper used in the test framework that allows a
command to run under "gdb" to make the session interactive.
* sg/test-with-stdin:
tests: make the 'test_pause' helper work in non-verbose mode
tests: create an interactive gdb session with the 'debug' helper
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
refs: parse_hide_refs_config to use parse_config_key
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
This supersedes jc/config-case-cmdline topic that has been discarded.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
Code to read submodule.<name>.ignore config did not state the
variable name correctly when giving an error message diagnosing
misconfiguration.
* sb/submodule-config-parse-ignore-fix:
submodule-config: correct error reporting for invalid ignore value
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
Map both old addresses to the new, hopefully more permanent one.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
The code that parses header fields in the commit object has been
updated for (micro)performance and code hygiene.
* rs/commit-parsing-optim:
commit: don't check for space twice when looking for header
commit: be more precise when searching for headers
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
A caller of tempfile API that uses stdio interface to write to
files may ignore errors while writing, which is detected when
tempfile is closed (with a call to ferror()). By that time, the
original errno that may have told us what went wrong is likely to
be long gone and was overwritten by an irrelevant value.
close_tempfile() now resets errno to EIO to make errno at least
predictable.
* jk/tempfile-ferror-fclose-confusion:
tempfile: set errno to a known value before calling ferror()
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
"git upload-pack", which is a counter-part of "git fetch", did not
report a request for a ref that was not advertised as invalid.
This is generally not a problem (because "git fetch" will stop
before making such a request), but is the right thing to do.
* jt/upload-pack-error-report:
upload-pack: report "not our ref" to client
A leak in a codepath to read from a packed object in (rare) cases
has been plugged.
* rs/sha1-file-plug-fallback-base-leak:
sha1_file: release fallback base's memory in unpack_entry()
There is no need for Python only to give a few messages to the
standard error stream, but we somehow did.
* ss/remote-bzr-hg-placeholder-wo-python:
contrib: git-remote-{bzr,hg} placeholders don't need Python
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
"Dumb http" transport used to misparse a nonsense http-alternates
response, which has been fixed.
* jk/http-walker-buffer-underflow-fix:
http-walker: fix buffer underflow processing remote alternates
"git status --porcelain" is supposed to give a stable output, but a
few strings were left as translatable by mistake.
* mg/status-porcelain-no-i18n:
git-status: make porcelain more robust
Change the documentation for push.tracking=* to re-include a mention
of what "tracking" does.
The "tracking" option was renamed to "upstream" back in
53c4031 ("push.default: Rename 'tracking' to 'upstream'", 2011-02-16),
this section was then subsequently rewritten in 87a70e4 ("config doc:
rewrite push.default section", 2013-06-19) to remove any mention of
"tracking".
Maybe we should just warn or die nowadays if this option is in the
config, but I had some old config of mine use this option, I'd
forgotten that it was a synonym, and nothing in git's documentation
mentioned that.
That's bad, either we shouldn't support it at all, or we should
document what it does. This patch does the latter.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hook was added in a86ed83cce (Merge branch 'tr/notes-display' -
2010-03-24), which updated githooks.txt but not git-commit.txt.
git-commit.txt was later updated in e858af6d50 (commit: document a
couple of options - 2012-06-08). Since this commit focused on command
line options, this section was probably forgotten.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change these two obvious typos to be in line with the rest of the
documentation, which uses the correct --[no-]whatever form.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the 'test_pause' helper function invokes the shell mid-test, it
explicitly redirects the shell's stdout and stderr to file descriptors
3 and 4, which are the stdout and stderr of the tests (i.e. where they
would be connected anyway without those redirections). These file
descriptors are only attached to the terminal in verbose mode, hence
the restriction of 'test_pause' to work only with '-v'.
Redirect the shell's stdout and stderr to the test environment's
original stdout and stderr, allowing it to work properly even in
non-verbose mode, and the restriction can be lifted.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'debug' test helper is supposed to facilitate debugging by running
a command of the test suite under gdb. Unfortunately, its usefulness
is severely limited, because that gdb session is not interactive,
since the test's, and thus gdb's standard input is redirected from
/dev/null (for a good reason, see 781f76b15 (test-lib: redirect stdin
of tests, 2011-12-15)).
Redirect gdb's standard file descriptors from/to the test
environment's stdin, stdout and stderr in the 'debug' helper, thus
creating an interactive gdb session (even in non-verbose mode), which
is much, much more useful.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git v2.12 was shipped with an embarrassing breakage where various
operations that verify paths given from the user stopped dying when
seeing an issue, and instead later triggering segfault.
... and then to down to 'maint'.
* js/realpath-pathdup-fix:
real_pathdup(): fix callsites that wanted it to die on error
t1501: demonstrate NULL pointer access with invalid GIT_WORK_TREE
Code clean-up and a string truncation fix.
* mm/two-more-xstrfmt:
bisect_next_all: convert xsnprintf to xstrfmt
stop_progress_msg: convert xsnprintf to xstrfmt
The command-line parsing of "git log -L" copied internal data
structures using incorrect size on ILP32 systems.
* vn/line-log-memcpy-size-fix:
line-log: use COPY_ARRAY to fix mis-sized memcpy
The code to parse "git log -L..." command line was buggy when there
are many ranges specified with -L; overrun of the allocated buffer
has been fixed.
* ax/line-log-range-merge-fix:
line-log.c: prevent crash during union of too many ranges
The patch subcommand of "git add -i" was meant to have paths
selection prompt just like other subcommand, unlike "git add -p"
directly jumps to hunk selection. Recently, this was broken and
"add -i" lost the paths selection dialog, but it now has been
fixed.
* jk/add-i-patch-do-prompt:
add--interactive: fix missing file prompt for patch mode with "-i"
When a redirected http transport gets an error during the
redirected request, we ignored the error we got from the server,
and ended up giving a not-so-useful error message.
* jt/http-base-url-update-upon-redirect:
http: attempt updating base URL only if no error
Reduce authentication round-trip over HTTP when the server supports
just a single authentication method.
* jk/http-auth:
http: add an "auto" mode for http.emptyauth
http: restrict auth methods to what the server advertises
As 'var' contains the whole value we get error messages that repeat
the section and key currently:
warning: Invalid parameter 'true' for config option 'submodule.submodule.plugins/hooks.ignore.ignore'
Fix this by only giving the section name in the warning.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Michael J Gruber
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
SZEDER Gábor
Stefan Beller