* jc/receive-pack-auto:
receive-pack: run "gc --auto --quiet" and optionally "update-server-info"
gc --auto --quiet: make the notice a bit less verboase
GIT_DIFFTOOL_PROMPT doesn't have any effect if overridden with --prompt.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first argument of the tar command is interpreted as a bundle of
letters specifying the mode of operation and additional options, with
any option arguments taken from subsequent words on the command line
as needed. The implementation of tar in busybox treats this bundle
as if preceded by a dash and then parses it by getopt rules, which
mishandles 'tar xfo -'. Use 'tar xof -' instead to work this around.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a regression introduce by d68dc34 (git-describe: Die early if
there are no possible descriptions, 2009-08-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce two new configuration variables, receive.autogc (defaults to
true) and receive.updateserverinfo (defaults to false). When these are
set, receive-pack runs "gc --auto --quiet" and "update-server-info"
respectively after it finishes receiving data from "git push" and updating
refs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
When "gc --auto --quiet" decides there is something to do, it tells the
user what it is doing, as it is going to make the user wait for a bit.
But the message was a bit too long.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables gitk to show the patch text with correct glyphs if the locale
is not UTF-8.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mbox file must have been added by accident in e9fe804 (git-mailinfo:
Fix getting the subject from the in-body [PATCH] line, 2008-07-14).
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Linus and other git developers from the early days trained their fingers
to type the command, every once in a while even without thinking, to check
the consistency of the repository back when the lower core part of the git
was still being developed. Developers who wanted to make sure that git
correctly dealt with packfiles could deliberately trigger their creation
and checked them after they were created carefully, but loose objects are
the ones that are written by various commands from random codepaths. It
made some technical sense to have a mode that checked only loose objects
from the debugging point of view for that reason.
Even for git developers, there no longer is any reason to type "git fsck"
every five minutes these days, worried that some newly created objects
might be corrupt due to recent change to git.
The reason we did not make "--full" the default is probably we trust our
filesystems a bit too much. At least, we trusted filesystems more than we
trusted the lower core part of git that was under development.
Once a packfile is created and we always use it read-only, there didn't
seem to be much point in suspecting that the underlying filesystems or
disks may corrupt them in such a way that is not caught by the SHA-1
checksum over the entire packfile and per object checksum. That trust in
the filesystems might have been a good tradeoff between fsck performance
and reliability on platforms git was initially developed on and for, but
it may not be true anymore as we run on many more platforms these days.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't want to use output() on git-commit --amend when rewording the
commit message. This leads to confusion as the editor is run in a
subshell with it's output saved away, leaving the user with a seemingly
frozen terminal.
Fix by removing the output part.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The format template string was declared as "const void *" for some unknown
reason, even though it obviously is meant to be passed a string. Make it
"const char *".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Get rid of the static variable that was used to prevent loading all
the refnames multiple times by moving that code out of describe(),
simply making sure it is only run once that way.
Also change the error message that is shown in case no refnames are
found to not include a hash any more, as the error condition is not
specific to any particular revision.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git push: say that --tag can't be used with --all or --mirror in help text
git push: remove incomplete options list from help text
document push's new quiet option
Makefile: clean block-sha1/ directory instead of mozilla-sha1/
This replaces an earlier patch by Björn Gustavsson,
Message-ID: <4AD75029.1010109@gmail.com>
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git push -h' shows usage text with incomplete list of options and then
has a separate list of options that are supported. Imitate the way other
commands (I looked at 'git diff' for an example) show their options.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'make clean' should remove the object files from block-sha1/
instead of the non-existent mozilla-sha1/ directory.
Signed-off-by: Carlos R. Mafra <crmafra@aei.mpg.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-blank-at-eof:
diff -B: colour whitespace errors
diff.c: emit_add_line() takes only the rest of the line
diff.c: split emit_line() from the first char and the rest of the line
diff.c: shuffling code around
diff --whitespace: fix blank lines at end
core.whitespace: split trailing-space into blank-at-{eol,eof}
diff --color: color blank-at-eof
diff --whitespace=warn/error: fix blank-at-eof check
diff --whitespace=warn/error: obey blank-at-eof
diff.c: the builtin_diff() deals with only two-file comparison
apply --whitespace: warn blank but not necessarily empty lines at EOF
apply --whitespace=warn/error: diagnose blank at EOF
apply.c: split check_whitespace() into two
apply --whitespace=fix: detect new blank lines at eof correctly
apply --whitespace=fix: fix handling of blank lines at the eof
Junio C Hamano
Markus Heidelberg
Andreas Schwab
Nasser Grainawi
Johannes Sixt
Matt Kraai
Stephen Boyd
René Scharfe
Nanako Shiraishi
Jeff King
Carlos R. Mafra