Fix the last few precedence tests failing in t7601 by now implementing
the logic to have --[no-]rebase override a pull.ff=only config setting.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are both merge and rebase branches in the logic, and previously
both had to handle fast-forwarding. Merge handled that implicitly
(because git merge handles it directly), while in rebase it was
explicit. Given that the --ff-only flag is meant to override any
--rebase or --no-rebase, make the code reflect that by handling
--ff-only before the merge-vs-rebase logic.
It turns out that this also fixes a bug for submodules. Previously,
when --ff-only was given, the code would run `merge --ff-only` on the
main module, and then run `submodule update --recursive --rebase` on the
submodules. With this change, we still run `merge --ff-only` on the
main module, but now run `submodule update --recursive --checkout` on
the submodules. I believe this better reflects the intent of --ff-only
to have it apply to both the main module and the submodules.
(Sidenote: It is somewhat interesting that all merges pass `--checkout`
to submodule update, even when `--no-ff` is specified, meaning that it
will only do fast-forward merges for submodules. This was discussed in
commit a6d7eb2c7a ("pull: optionally rebase submodules (remote submodule
changes only)", 2017-06-23). The same limitations apply now as then, so
we are not trying to fix this at this time.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning about pulling without specifying how to reconcile divergent
branches says that after setting pull.rebase to true, --ff-only can
still be passed on the command line to require a fast-forward. Make that
actually work.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[en: updated tests; note 3 fixes and 1 new failure]
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were already code checking that --rebase was incompatible with
a merge of multiple heads. However, we were sometimes throwing warnings
about lack of specification of rebase vs. merge when given multiple
heads. Since rebasing is disallowed with multiple merge heads, that
seems like a poor warning to print; we should instead just assume
merging is wanted.
Add a few tests checking multiple merge head behavior.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interaction of rebase and merge flags and options was not well
tested. Add several tests to check for correct behavior from the
following rules:
* --ff-only vs. --[no-]rebase
(and the related pull.ff=only vs. pull.rebase)
* --rebase[=!false] vs. --no-ff and --ff
(and the related pull.rebase=!false overrides pull.ff=!only)
* command line flags take precedence over config, except:
* --no-rebase heeds pull.ff=!only
* pull.rebase=!false vs --no-ff and --ff
For more details behind these rules and a larger table of individual
cases, refer to https://lore.kernel.org/git/xmqqwnpqot4m.fsf@gitster.g/
and the links found therein.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep --and -e foo" ought to have been diagnosed as an error
but instead segfaulted, which has been corrected.
* rs/grep-parser-fix:
grep: report missing left operand of --and
The "union" conflict resolution variant misbehaved when used with
binary merge driver.
* jk/union-merge-binary:
ll_union_merge(): rename path_unused parameter
ll_union_merge(): pass name labels to ll_xdl_merge()
ll_binary_merge(): handle XDL_MERGE_FAVOR_UNION
Various updates to tests around "git describe"
* ab/describe-tests-fix:
describe tests: support -C in "check_describe"
describe tests: fix nested "test_expect_success" call
describe tests: don't rely on err.actual from "check_describe"
describe tests: refactor away from glob matching
describe tests: improve test for --work-tree & --dirty
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
Preliminary clean-up of tests before the main reftable changes
hits the codebase.
* hn/prep-tests-for-reftable: (22 commits)
t1415: set REFFILES for test specific to storage format
t4202: mark bogus head hash test with REFFILES
t7003: check reflog existence only for REFFILES
t7900: stop checking for loose refs
t1404: mark tests that muck with .git directly as REFFILES.
t2017: mark --orphan/logAllRefUpdates=false test as REFFILES
t1414: mark corruption test with REFFILES
t1407: require REFFILES for for_each_reflog test
test-lib: provide test prereq REFFILES
t5304: use "reflog expire --all" to clear the reflog
t5304: restyle: trim empty lines, drop ':' before >
t7003: use rev-parse rather than FS inspection
t5000: inspect HEAD using git-rev-parse
t5000: reformat indentation to the latest fashion
t1301: fix typo in error message
t1413: use tar to save and restore entire .git directory
t1401-symbolic-ref: avoid direct filesystem access
t1401: use tar to snapshot and restore repo state
t5601: read HEAD using rev-parse
t9300: check ref existence using test-helper rather than a file system check
...
Some more code and doc clarification around "git push".
* fc/push-simple-updates-cleanup:
push: don't get a full remote object
push: only check same_remote when needed
push: remove trivial function
push: remove redundant check
push: factor out the typical case
push: get rid of all the setup_push_* functions
push: trivial simplifications
push: make setup_push_* return the dst
push: only get the branch when needed
push: factor out null branch check
push: split switch cases
push: return immediately in trivial switch case
push: create new get_upstream_ref() helper
"git cat-file --batch-all-objects"" misbehaved when "--batch" is in
use and did not ask for certain object traits.
* zh/cat-file-batch-fix:
cat-file: merge two block into one
cat-file: handle trivial --batch format with --batch-all-objects
When we cannot figure out how wide the terminal is, we use a
fallback value of 80 ourselves (which cannot be avoided), but when
we run the pager, we export it in COLUMNS, which forces the pager
to use the hardcoded value, even when the pager is perfectly
capable to figure it out itself. Stop exporting COLUMNS when we
fall back on the hardcoded default value for our own use.
* js/stop-exporting-bogus-columns:
pager: avoid setting COLUMNS when we're guessing its value
On Windows, mergetool has been taught to find kdiff3.exe just like
it finds winmerge.exe.
* ms/mergetools-kdiff3-on-windows:
mergetools/kdiff3: make kdiff3 work on Windows too
Output from some of our tests were affected by the width of the
terminal that they were run in, which has been corrected by
exporting a fixed value in the COLUMNS environment.
* ab/fix-columns-to-80-during-tests:
test-lib.sh: set COLUMNS=80 for --verbose repeatability
Recent update to completion script (in contrib/) broke those who
use the __git_complete helper to define completion to their custom
command.
* fw/complete-cmd-idx-fix:
completion: bash: fix late declaration of __git_cmd_idx
Some test scripts assumed that readlink(1) was universally
installed and available, which is not the case.
* jk/test-without-readlink-1:
t: use portable wrapper for readlink(1)
The side-band demultiplexer that is used to display progress output
from the remote end did not clear the line properly when the end of
line hits at a packet boundary, which has been corrected. Also
comes with test clean-ups.
* jx/sideband-cleanup:
test: refactor to use "get_abbrev_oid" to get abbrev oid
test: refactor to use "test_commit" to create commits
test: compare raw output, not mangle tabs and spaces
sideband: don't lose clear-to-eol at packet boundary
We broke "GIT_SKIP_TESTS=t?000" to skip certain tests in recent
update, which got fixed.
* jk/test-avoid-globmatch-with-skip-patterns:
test-lib: avoid accidental globbing in match_pattern_list()
Work around inefficient glob substitution in older versions of bash
by rewriting parts of a test.
* jx/t6020-with-older-bash:
t6020: fix incompatible parameter expansion
Make the codebase MSAN clean.
* ah/uninitialized-reads-fix:
builtin/checkout--worker: zero-initialise struct to avoid MSAN complaints
split-index: use oideq instead of memcmp to compare object_id's
bulk-checkin: make buffer reuse more obvious and safer
Update "git subtree" to work better on Windows.
* js/subtree-on-windows-fix:
subtree: fix assumption about the directory separator
subtree: fix the GIT_EXEC_PATH sanity check to work on Windows
"git-svn" tests assumed that "locale -a", which is used to pick an
available UTF-8 locale, is available everywhere. A knob has been
introduced to allow testers to specify a suitable locale to use.
* dd/svn-test-wo-locale-a:
t: use user-specified utf-8 locale for testing svn
Elijah Newren
Alex Henrie
Junio C Hamano