Граф коммитов

69 Коммитов

Автор SHA1 Сообщение Дата
Karsten Blees 0aaf62b6e0 dir.c: git-status --ignored: don't scan the work tree twice
'git-status --ignored' still scans the work tree twice to collect
untracked and ignored files, respectively.

fill_directory / read_directory already supports collecting untracked and
ignored files in a single directory scan. However, the DIR_COLLECT_IGNORED
flag to enable this has some git-add specific side-effects (e.g. it
doesn't recurse into ignored directories, so listing ignored files with
--untracked=all doesn't work).

The DIR_SHOW_IGNORED flag doesn't list untracked files and returns ignored
files in dir_struct.entries[] (instead of dir_struct.ignored[] as
DIR_COLLECT_IGNORED). DIR_SHOW_IGNORED is used all throughout git.

We don't want to break the existing API, so lets introduce a new flag
DIR_SHOW_IGNORED_TOO that lists untracked as well as ignored files similar
to DIR_COLLECT_FILES, but will recurse into sub-directories based on the
other flags as DIR_SHOW_IGNORED does.

In dir.c::read_directory_recursive, add ignored files to either
dir_struct.entries[] or dir_struct.ignored[] based on the flags. Also move
the DIR_COLLECT_IGNORED case here so that filling result lists is in a
common place.

In wt-status.c::wt_status_collect_untracked, use the new flag and read
results from dir_struct.ignored[]. Remove the extra fill_directory call.

builtin/check-ignore.c doesn't call fill_directory, setting the git-add
specific DIR_COLLECT_IGNORED flag has no effect here. Remove for clarity.

Update API documentation to reflect the changes.

Performance: with this patch, 'git-status --ignored' is typically as fast
as 'git-status'.

Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15 12:36:42 -07:00
Karsten Blees b07bc8c8c3 dir.c: replace is_path_excluded with now equivalent is_excluded API
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15 12:34:01 -07:00
Karsten Blees 95c6f27164 dir.c: unify is_excluded and is_path_excluded APIs
The is_excluded and is_path_excluded APIs are very similar, except for a
few noteworthy differences:

is_excluded doesn't handle ignored directories, results for paths within
ignored directories are incorrect. This is probably based on the premise
that recursive directory scans should stop at ignored directories, which
is no longer true (in certain cases, read_directory_recursive currently
calls is_excluded *and* is_path_excluded to get correct ignored state).

is_excluded caches parsed .gitignore files of the last directory in struct
dir_struct. If the directory changes, it finds a common parent directory
and is very careful to drop only as much state as necessary. On the other
hand, is_excluded will also read and parse .gitignore files in already
ignored directories, which are completely irrelevant.

is_path_excluded correctly handles ignored directories by checking if any
component in the path is excluded. As it uses is_excluded internally, this
unfortunately forces is_excluded to drop and re-read all .gitignore files,
as there is no common parent directory for the root dir.

is_path_excluded tracks state in a separate struct path_exclude_check,
which is essentially a wrapper of dir_struct with two more fields. However,
as is_path_excluded also modifies dir_struct, it is not possible to e.g.
use multiple path_exclude_check structures with the same dir_struct in
parallel. The additional structure just unnecessarily complicates the API.

Teach is_excluded / prep_exclude about ignored directories: whenever
entering a new directory, first check if the entire directory is excluded.
Remember the excluded state in dir_struct. Don't traverse into already
ignored directories (i.e. don't read irrelevant .gitignore files).

Directories could also be excluded by exclude patterns specified on the
command line or .git/info/exclude, so we cannot simply skip prep_exclude
entirely if there's no .gitignore file name (dir_struct.exclude_per_dir).
Move this check to just before actually reading the file.

is_path_excluded is now equivalent to is_excluded, so we can simply
redirect to it (the public API is cleaned up in the next patch).

The performance impact of the additional ignored check per directory is
hardly noticeable when reading directories recursively (e.g. 'git status').
However, performance of git commands using the is_path_excluded API (e.g.
'git ls-files --cached --ignored --exclude-standard') is greatly improved
as this no longer re-reads .gitignore files on each call.

Here's some performance data from the linux and WebKit repos (best of 10
runs on a Debian Linux on SSD, core.preloadIndex=true):

       | ls-files -ci   |    status      | status --ignored
       | linux | WebKit | linux | WebKit | linux | WebKit
-------+-------+--------+-------+--------+-------+---------
before | 0.506 |  6.539 | 0.212 |  1.555 | 0.323 |  2.541
after  | 0.080 |  1.191 | 0.218 |  1.583 | 0.321 |  2.579
gain   | 6.325 |  5.490 | 0.972 |  0.982 | 1.006 |  0.985

Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15 12:34:00 -07:00
Junio C Hamano a39b15b4f6 Merge branch 'as/check-ignore'
Add a new command "git check-ignore" for debugging .gitignore
files.

The variable names may want to get cleaned up but that can be done
in-tree.

* as/check-ignore:
  clean.c, ls-files.c: respect encapsulation of exclude_list_groups
  t0008: avoid brace expansion
  add git-check-ignore sub-command
  setup.c: document get_pathspec()
  add.c: extract new die_if_path_beyond_symlink() for reuse
  add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
  pathspec.c: rename newly public functions for clarity
  add.c: move pathspec matchers into new pathspec.c for reuse
  add.c: remove unused argument from validate_pathspec()
  dir.c: improve docs for match_pathspec() and match_pathspec_depth()
  dir.c: provide clear_directory() for reclaiming dir_struct memory
  dir.c: keep track of where patterns came from
  dir.c: use a single struct exclude_list per source of excludes

Conflicts:
	builtin/ls-files.c
	dir.c
2013-01-23 21:19:10 -08:00
Junio C Hamano d912b0e44f Merge branch 'as/dir-c-cleanup'
Refactor and generally clean up the directory traversal API
implementation.

* as/dir-c-cleanup:
  dir.c: rename free_excludes() to clear_exclude_list()
  dir.c: refactor is_path_excluded()
  dir.c: refactor is_excluded()
  dir.c: refactor is_excluded_from_list()
  dir.c: rename excluded() to is_excluded()
  dir.c: rename excluded_from_list() to is_excluded_from_list()
  dir.c: rename path_excluded() to is_path_excluded()
  dir.c: rename cryptic 'which' variable to more consistent name
  Improve documentation and comments regarding directory traversal API
  api-directory-listing.txt: update to match code
2013-01-10 13:47:25 -08:00
Adam Spiers 52ed1894b0 dir.c: improve docs for match_pathspec() and match_pathspec_depth()
Fix a grammatical issue in the description of these functions, and
make it more obvious how and why seen[] can be reused across multiple
invocations.

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06 14:26:37 -08:00
Adam Spiers 270be81604 dir.c: provide clear_directory() for reclaiming dir_struct memory
By the end of a directory traversal, a dir_struct instance will
typically contains pointers to various data structures on the heap.
clear_directory() provides a convenient way to reclaim that memory.

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06 14:26:37 -08:00
Adam Spiers c04318e46a dir.c: keep track of where patterns came from
For exclude patterns read in from files, the filename is stored in the
exclude list, and the originating line number is stored in the
individual exclude (counting starting at 1).

For exclude patterns provided on the command line, a string describing
the source of the patterns is stored in the exclude list, and the
sequence number assigned to each exclude pattern is negative, with
counting starting at -1.  So for example the 2nd pattern provided via
--exclude would be numbered -2.  This allows any future consumers of
that data to easily distinguish between exclude patterns from files
vs. from the CLI.

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06 14:26:37 -08:00
Adam Spiers c082df2453 dir.c: use a single struct exclude_list per source of excludes
Previously each exclude_list could potentially contain patterns
from multiple sources.  For example dir->exclude_list[EXC_FILE]
would typically contain patterns from .git/info/exclude and
core.excludesfile, and dir->exclude_list[EXC_DIRS] could contain
patterns from multiple per-directory .gitignore files during
directory traversal (i.e. when dir->exclude_stack was more than
one item deep).

We split these composite exclude_lists up into three groups of
exclude_lists (EXC_CMDL / EXC_DIRS / EXC_FILE as before), so that each
exclude_list now contains patterns from a single source.  This will
allow us to cleanly track the origin of each pattern simply by adding
a src field to struct exclude_list, rather than to struct exclude,
which would make memory management of the source string tricky in the
EXC_DIRS case where its contents are dynamically generated.

Similarly, by moving the filebuf member from struct exclude_stack to
struct exclude_list, it allows us to track and subsequently free
memory buffers allocated during the parsing of all exclude files,
rather than only tracking buffers allocated for files in the EXC_DIRS
group.

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-06 14:25:06 -08:00
Adam Spiers f619881251 dir.c: rename free_excludes() to clear_exclude_list()
It is clearer to use a 'clear_' prefix for functions which empty
and deallocate the contents of a data structure without freeing
the structure itself, and a 'free_' prefix for functions which
also free the structure itself.

http://article.gmane.org/gmane.comp.version-control.git/206128

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28 12:07:47 -08:00
Adam Spiers a35341a86e dir.c: refactor is_path_excluded()
In a similar way to the previous commit, this extracts a new helper
function last_exclude_matching_path() which return the last
exclude_list element which matched, or NULL if no match was found.
is_path_excluded() becomes a wrapper around this, and just returns 0
or 1 depending on whether any matching exclude_list element was found.

This allows callers to find out _why_ a given path was excluded,
rather than just whether it was or not, paving the way for a new git
sub-command which allows users to test their exclude lists from the
command line.

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28 12:07:46 -08:00
Adam Spiers 6d24e7a807 dir.c: rename excluded() to is_excluded()
Continue adopting clearer names for exclude functions.  This is_*
naming pattern for functions returning booleans was discussed here:

http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28 12:07:46 -08:00
Adam Spiers 0795805053 dir.c: rename excluded_from_list() to is_excluded_from_list()
Continue adopting clearer names for exclude functions.  This 'is_*'
naming pattern for functions returning booleans was discussed here:

http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924

Also adjust their callers as necessary.

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28 12:07:46 -08:00
Adam Spiers 9013089c4a dir.c: rename path_excluded() to is_path_excluded()
Start adopting clearer names for exclude functions.  This 'is_*'
naming pattern for functions returning booleans was agreed here:

http://thread.gmane.org/gmane.comp.version-control.git/204661/focus=204924

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28 12:07:45 -08:00
Adam Spiers 840fc334e9 dir.c: rename cryptic 'which' variable to more consistent name
'el' is only *slightly* less cryptic, but is already used as the
variable name for a struct exclude_list pointer in numerous other
places, so this reduces the number of cryptic variable names in use by
one :-)

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28 12:07:45 -08:00
Adam Spiers 95a68344af Improve documentation and comments regarding directory traversal API
traversal API has a few potentially confusing properties.  These
comments clarify a few key aspects and will hopefully make it easier
to understand for other newcomers in the future.

Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-28 12:07:45 -08:00
Nguyễn Thái Ngọc Duy 8c6abbcd27 pathspec: apply "*.c" optimization from exclude
When a pattern contains only a single asterisk as wildcard,
e.g. "foo*bar", after literally comparing the leading part "foo" with
the string, we can compare the tail of the string and make sure it
matches "bar", instead of running fnmatch() on "*bar" against the
remainder of the string.

-O2 build on linux-2.6, without the patch:

$ time git rev-list --quiet HEAD -- '*.c'

real    0m40.770s
user    0m40.290s
sys     0m0.256s

With the patch

$ time ~/w/git/git rev-list --quiet HEAD -- '*.c'

real    0m34.288s
user    0m33.997s
sys     0m0.205s

The above command is not supposed to be widely popular. It's chosen
because it exercises pathspec matching a lot. The point is it cuts
down matching time for popular patterns like *.c, which could be used
as pathspec in other places.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-26 11:13:13 -08:00
Nguyễn Thái Ngọc Duy 5d74762d87 pathspec: do exact comparison on the leading non-wildcard part
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-26 11:12:51 -08:00
Nguyễn Thái Ngọc Duy 82dce998c2 attr: more matching optimizations from .gitignore
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.

This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:

* "!pattern" syntax is forbidden in .gitattributes.  As an attribute
  can be unset (i.e. set to a special value "false") or made back to
  unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
  which one it means.

* we support attaching attributes to directories, but git-core
  internally does not currently make use of attributes on
  directories.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15 14:57:17 -07:00
Nguyễn Thái Ngọc Duy 84460eec8d gitignore: make pattern parsing code a separate function
This function can later be reused by attr.c. Also turn to_exclude
field into a flag.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-15 14:57:16 -07:00
Junio C Hamano 68bdfd7cdc Merge commit 'f9f6e2c' into nd/attr-match-optim-more
* commit 'f9f6e2c':
  exclude: do strcmp as much as possible before fnmatch
  dir.c: get rid of the wildcard symbol set in no_wildcard()
  Unindent excluded_from_list()
2012-10-05 12:45:30 -07:00
Junio C Hamano cd733f4f71 Merge branch 'jc/ls-files-i-dir' into maint
"git ls-files --exclude=t -i" did not consider anything under t/ as
excluded, as it did not pay attention to exclusion of leading paths
while walking the index.  Other two users of excluded() are also
updated.

* jc/ls-files-i-dir:
  dir.c: make excluded() file scope static
  unpack-trees.c: use path_excluded() in check_ok_to_remove()
  builtin/add.c: use path_excluded()
  path_excluded(): update API to less cache-entry centric
  ls-files -i: micro-optimize path_excluded()
  ls-files -i: pay attention to exclusion of leading paths
2012-07-11 12:44:35 -07:00
Nguyễn Thái Ngọc Duy f9f6e2ce26 exclude: do strcmp as much as possible before fnmatch
this also avoids calling fnmatch() if the non-wildcard prefix is
longer than basename

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-07 11:33:38 -07:00
Junio C Hamano 0d316f0cef dir.c: make excluded() file scope static
Now there no longer is external callers of this interface, so we can
make it static.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-05 22:26:12 -07:00
Junio C Hamano 782cd4c0f6 path_excluded(): update API to less cache-entry centric
It was stupid of me to make the API too much cache-entry specific;
the caller may want to check arbitrary pathname without having a
corresponding cache-entry to see if a path is ignored.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-05 21:22:36 -07:00
Junio C Hamano eb41775ecc ls-files -i: pay attention to exclusion of leading paths
"git ls-files --exclude=t/ -i" does not show paths in directory t/
that have been added to the index, but it should.

The excluded() API was designed for callers who walk the tree from
the top, checking each level of the directory hierarchy as it
descends if it is excluded, and not even bothering to recurse into
an excluded directory.  This would allow us optimize for a common
case by not having to check if the exclude pattern "foo/" matches
when looking at "foo/bar", because the caller should have noticed
that "foo" is excluded and did not even bother to read "foo/bar"
out of opendir()/readdir() to call it.

The code for "ls-files -i" however walks the index linearly, feeding
paths without checking if the leading directory is already excluded.

Introduce a helper function path_excluded() to let this caller
properly call excluded() check for higher hierarchies as necessary.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-03 16:05:42 -07:00
Junio C Hamano c844a80356 remove_dir_recursively(): Add flag for skipping removal of toplevel dir
Add the REMOVE_DIR_KEEP_TOPLEVEL flag to remove_dir_recursively() for
deleting everything inside the given directory, but _not_ the given
directory itself.

Note that this does not pass the REMOVE_DIR_KEEP_NESTED_GIT flag, if set,
to the recursive invocations of remove_dir_recursively().  It is likely to
be a a bug that has been present since REMOVE_DIR_KEEP_NESTED_GIT was
introduced (a0f4afb), but this commit keeps the same behaviour for now.

Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-15 11:12:25 -07:00
Clemens Buchacher f950eb9560 rename pathspec_prefix() to common_prefix() and move to dir.[ch]
Also make common_prefix_len() static as this refactoring makes dir.c
itself the only caller of this helper function.

Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-12 14:38:32 -07:00
Junio C Hamano 4a085b16f4 consolidate pathspec_prefix and common_prefix
The implementation from pathspec_prefix (slightly modified) replaces the
current common_prefix, because it also respects glob characters.

Based on a patch by Clemens Buchacher.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-06 12:54:19 -07:00
Junio C Hamano c67e367c50 Merge branch 'nd/maint-setup'
* nd/maint-setup:
  Kill off get_relative_cwd()
  setup: return correct prefix if worktree is '/'

Conflicts:
	dir.c
	setup.c
2011-05-02 15:58:30 -07:00
Nguyễn Thái Ngọc Duy b892913d51 Kill off get_relative_cwd()
Function dir_inside_of() does something similar (correctly), but looks
easier to understand and does not bundle cwd to its business. Given
get_relative_cwd's only user is is_inside_dir, we can kill it for
good.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-28 17:02:57 -07:00
Nguyễn Thái Ngọc Duy 9b125da490 setup: return correct prefix if worktree is '/'
The same old problem reappears after setup code is reworked.  We tend
to assume there is at least one path component in a path and forget
that path can be simply '/'.

Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-28 17:01:15 -07:00
Nguyễn Thái Ngọc Duy 61cf282045 pathspec: add match_pathspec_depth()
match_pathspec_depth() is a clone of match_pathspec() except that it
can take depth limit. Computation is a bit lighter compared to
match_pathspec() because it's usually precomputed and stored in struct
pathspec.

In long term, match_pathspec() and match_one() should be removed in
favor of this function.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-03 14:08:30 -08:00
Nguyễn Thái Ngọc Duy bc96cc87db tree_entry_interesting(): support depth limit
This is needed to replace pathspec_matches() in builtin/grep.c.

max_depth == -1 means infinite depth. Depth limit is only effective
when pathspec.recursive == 1. When pathspec.recursive == 0, the
behavior depends on match functions: non-recursive for
tree_entry_interesting() and recursive for match_pathspec{,_depth}

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-03 14:08:30 -08:00
Junio C Hamano e39212ab08 Merge branch 'nd/maint-fix-add-typo-detection'
* nd/maint-fix-add-typo-detection:
  Revert "excluded_1(): support exclude files in index"
  unpack-trees: fix sparse checkout's "unable to match directories"
  unpack-trees: move all skip-worktree checks back to unpack_trees()
  dir.c: add free_excludes()
  cache.h: realign and use (1 << x) form for CE_* constants
2010-12-22 14:40:26 -08:00
Nguyễn Thái Ngọc Duy 0fd0e2417d dir.c: add free_excludes()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29 13:34:55 -08:00
Joshua Jensen 8cf2a84e9d Add string comparison functions that respect the ignore_case variable.
Multiple locations within this patch series alter a case sensitive
string comparison call such as strcmp() to be a call to a string
comparison call that selects case comparison based on the global
ignore_case variable. Behaviorally, when core.ignorecase=false, the
*_icase() versions are functionally equivalent to their C runtime
counterparts.  When core.ignorecase=true, the *_icase() versions perform
a case insensitive comparison.

Like Linus' earlier ignorecase patch, these may ignore filename
conventions on certain file systems. By isolating filename comparisons
to certain functions, support for those filename conventions may be more
easily met.

Signed-off-by: Joshua Jensen <jjensen@workspacewhiz.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06 11:19:58 -07:00
Jens Lehmann 108da0db12 git add: Add the "--ignore-missing" option for the dry run
Sometimes it is useful to know if a file or directory will be ignored
before it is added to the work tree. An example is "git submodule add",
where it would be really nice to be able to fail with an appropriate
error message before the submodule is cloned and checked out.

Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-12 15:13:54 -07:00
Junio C Hamano 73d66323ac Merge branch 'nd/sparse'
* nd/sparse: (25 commits)
  t7002: test for not using external grep on skip-worktree paths
  t7002: set test prerequisite "external-grep" if supported
  grep: do not do external grep on skip-worktree entries
  commit: correctly respect skip-worktree bit
  ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
  tests: rename duplicate t1009
  sparse checkout: inhibit empty worktree
  Add tests for sparse checkout
  read-tree: add --no-sparse-checkout to disable sparse checkout support
  unpack-trees(): ignore worktree check outside checkout area
  unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
  unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
  unpack-trees.c: generalize verify_* functions
  unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
  Introduce "sparse checkout"
  dir.c: export excluded_1() and add_excludes_from_file_1()
  excluded_1(): support exclude files in index
  unpack-trees(): carry skip-worktree bit over in merged_entry()
  Read .gitignore from index if it is skip-worktree
  Avoid writing to buffer in add_excludes_from_file_1()
  ...

Conflicts:
	.gitignore
	Documentation/config.txt
	Documentation/git-update-index.txt
	Makefile
	entry.c
	t/t7002-grep.sh
2010-01-13 11:58:34 -08:00
Nguyễn Thái Ngọc Duy cb09753423 dir.c: export excluded_1() and add_excludes_from_file_1()
These functions are used to handle .gitignore. They are now exported
so that sparse checkout can reuse.

Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-23 17:13:33 -07:00
Junio C Hamano a0f4afbe87 clean: require double -f options to nuke nested git repository and work tree
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything.  This is rarely what the user wants.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-29 12:22:30 -07:00
Linus Torvalds dba2e2037f Simplify read_directory[_recursive]() arguments
Stop the insanity with separate 'path' and 'base' arguments that must
match.  We don't need that crazy interface any more, since we cleaned up
handling of 'path' in commit da4b3e8c28.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-09 01:11:28 -07:00
Linus Torvalds 1d8842d921 Add 'fill_directory()' helper function for directory traversal
Most of the users of "read_directory()" actually want a much simpler
interface than the whole complex (but rather powerful) one.

In fact 'git add' had already largely abstracted out the core interface
issues into a private "fill_directory()" function that was largely
applicable almost as-is to a number of callers.  Yes, 'git add' wants to
do some extra work of its own, specific to the add semantics, but we can
easily split that out, and use the core as a generic function.

This function does exactly that, and now that much simplified
'fill_directory()' function can be shared with a number of callers,
while also ensuring that the rather more complex calling conventions of
read_directory() are used by fewer call-sites.

This also makes the 'common_prefix()' helper function private to dir.c,
since all callers are now in that file.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-09 01:11:26 -07:00
Johannes Schindelin 7c4c97c0ac Turn the flags in struct dir_struct into a single variable
By having flags represented as bits in the new member variable 'flags',
it will be easier to use parse_options when dir_struct is involved.

Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-18 11:04:19 -08:00
Alexander Potashev 55892d2398 Allow cloning to an existing empty directory
The die() message updated accordingly.

The previous behaviour was to only allow cloning when the destination
directory doesn't exist.

[jc: added trivial tests]

Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-11 13:26:29 -08:00
Alexander Potashev 8ca12c0d62 add is_dot_or_dotdot inline function
A new inline function is_dot_or_dotdot is used to check if the
directory name is either "." or "..". It returns a non-zero value if
the given string is "." or "..". It's applicable to a lot of Git
source code.

Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-11 13:21:57 -08:00
Nanako Shiraishi 159b321270 dir.c: make dir_add_name() and dir_add_ignored() static
These functions are not used by any other file.

Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-10-02 17:46:09 -07:00
Alex Riesen 4a92d1bfb7 Add remove_path: a function to remove as much as possible of a path
The function has two potential users which both managed to get wrong
their implementations (the one in builtin-rm.c one has a memleak, and
builtin-merge-recursive.c scribles over its const argument).

Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-09-29 08:37:07 -07:00
Junio C Hamano 6831a88ac0 gitignore: lazily find dtype
When we process "foo/" entries in gitignore files on a system
that does not have d_type member in "struct dirent", the earlier
implementation ran lstat(2) separately when matching with
entries that came from the command line, in-tree .gitignore
files, and $GIT_DIR/info/excludes file.

This optimizes it by delaying the lstat(2) call until it becomes
absolutely necessary.

The initial idea for this change was by Jeff King, but I
optimized it further to pass pointers to around.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05 00:46:49 -08:00
Junio C Hamano d6b8fc303b gitignore(5): Allow "foo/" in ignore list to match directory "foo"
A pattern "foo/" in the exclude list did not match directory
"foo", but a pattern "foo" did.  This attempts to extend the
exclude mechanism so that it would while not matching a regular
file or a symbolic link "foo".  In order to differentiate a
directory and non directory, this passes down the type of path
being checked to excluded() function.

A downside is that the recursive directory walk may need to run
lstat(2) more often on systems whose "struct dirent" do not give
the type of the entry; earlier it did not have to do so for an
excluded path, but we now need to figure out if a path is a
directory before deciding to exclude it.  This is especially bad
because an idea similar to the earlier CE_UPTODATE optimization
to reduce number of lstat(2) calls would by definition not apply
to the codepaths involved, as (1) directories will not be
registered in the index, and (2) excluded paths will not be in
the index anyway.

Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-05 00:46:49 -08:00