Output from "git status --ignored" did not work well when used with
"--untracked".
* ap/status-ignored-in-ignored-directory:
status: always report ignored tracked directories
git-status: Test --ignored behavior
dir.c: Make git-status --ignored more consistent
When enumerating paths that are ignored, paths the index knows
about are not included in the result. The "index knows about"
check is done by consulting the name hash, not the actual
contents of the index:
- When core.ignorecase is false, directory names are not in the
name hash, and ignored ones are shown as ignored (directories
can never be tracked anyway).
- When core.ignorecase is true, however, the name hash keeps
track of the names of directories, in order to detect
additions of the paths under different cases. This causes
ignored directories to be mistakenly excluded when
enumerating ignored paths.
Stop excluding directories that are in the name hash when
looking for ignored files in dir_add_name(); the names that are
actually in the index are excluded much earlier in the callchain
in treat_file(), so this fix will not make them mistakenly
identified as ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behavior of git-status is inconsistent and misleading.
Especially when used with --untracked-files=all option:
- files ignored in untracked directories will be missing from
status output.
- untracked files in committed yet ignored directories are also
missing.
- with --untracked-files=normal, untracked directories that
contains only ignored files are dropped too.
Make the behavior more consistent across all possible use cases:
- "--ignored --untracked-files=normal" doesn't show each specific
files but top directory. It instead shows untracked directories
that only contains ignored files, and ignored tracked directories
with untracked files.
- "--ignored --untracked-files=all" shows all ignored files, either
because it's in an ignored directory (tracked or untracked), or
because the file is explicitly ignored.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Start laying the foundation to build the "wildmatch" after we can
agree on its desired semantics.
* nd/attr-match-optim-more:
attr: more matching optimizations from .gitignore
gitignore: make pattern parsing code a separate function
exclude: split pathname matching code into a separate function
exclude: fix a bug in prefix compare optimization
exclude: split basename matching code into a separate function
exclude: stricten a length check in EXC_FLAG_ENDSWITH case
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.
This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:
* "!pattern" syntax is forbidden in .gitattributes. As an attribute
can be unset (i.e. set to a special value "false") or made back to
unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
which one it means.
* we support attaching attributes to directories, but git-core
internally does not currently make use of attributes on
directories.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can later be reused by attr.c. Also turn to_exclude
field into a flag.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "namelen" becomes zero at this stage, we have matched the fixed
part, but whether it actually matches the pattern still depends on the
pattern in "exclude". As demonstrated in t3001, path "three/a.3"
exists and it matches the "three/a.3" part in pattern "three/a.3[abc]",
but that does not mean a true match.
Don't be too optimistic and let fnmatch() do the job.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This block of code deals with the "basename" part only, which has the
length of "pathlen - (basename - pathname)". Stricten the length check
and remove "pathname" from the main expression to avoid confusion.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'f9f6e2c':
exclude: do strcmp as much as possible before fnmatch
dir.c: get rid of the wildcard symbol set in no_wildcard()
Unindent excluded_from_list()
The previous series introduced warnings to multiple places, but it
could become tiring to see the warning on the same path over and
over again during a single run of Git. Making just one function
responsible for issuing this warning, we could later choose to keep
track of which paths we issued a warning (it would involve a hash
table of paths after running them through real_path() or something)
in order to reduce noise.
Right now we do not know if the noise reduction is necessary, but it
still would be a good code reduction/sharing anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to access gitignore files, we check for their
existence with a call to "access". We silently ignore
missing files. However, if a file is not readable, this may
be a configuration error; let's warn the user.
For $GIT_DIR/info/excludes or core.excludesfile, we can just
use access_or_warn. However, for per-directory files we
actually try to open them, so we must add a custom warning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touches to the XDG support (new feature for 1.7.12) and
tests.
* mm/config-xdg:
t1306: check that XDG_CONFIG_HOME works
ignore: make sure we have an xdg path before using it
attr: make sure we have an xdg path before using it
test-lib.sh: unset XDG_CONFIG_HOME
Commit e3ebc35 (config: fix several access(NULL) calls, 2012-07-12) was
fixing access(NULL) calls when trying to access $HOME/.config/git/config,
but missed the ones when trying to access $HOME/.config/git/ignore. Fix
and test this.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --exclude=t -i" did not consider anything under t/ as
excluded, as it did not pay attention to exclusion of leading paths
while walking the index. Other two users of excluded() are also
updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
Teach git to read various information from $XDG_CONFIG_HOME/git/ to allow
the user to avoid cluttering $HOME.
* mm/config-xdg:
config: write to $XDG_CONFIG_HOME/git/config file when appropriate
Let core.attributesfile default to $XDG_CONFIG_HOME/git/attributes
Let core.excludesfile default to $XDG_CONFIG_HOME/git/ignore
config: read (but not write) from $XDG_CONFIG_HOME/git/config file
Attempt to optimize matching with an exclude pattern with a deep
directory hierarchy by taking the part that specifies leading path
without wildcard literally.
To use the feature of core.excludesfile, the user needs:
1. to create such a file,
2. and add configuration variable to point at it.
Instead, we can make this a one-step process by choosing a default value
which points to a filename in the user's $HOME, that is unlikely to
already exist on the system, and only use the presence of the file as a
cue that the user wants to use that feature.
And we use "${XDG_CONFIG_HOME:-$HOME/.config/git}/ignore" as such a
file, in the same directory as the newly added configuration file
("${XDG_CONFIG_HOME:-$HOME/.config/git}/config). The use of this
directory is in line with XDG specification as a location to store
such application specific files.
Signed-off-by: Huynh Khoi Nguyen Nguyen <Huynh-Khoi-Nguyen.Nguyen@ensimag.imag.fr>
Signed-off-by: Valentin Duperray <Valentin.Duperray@ensimag.imag.fr>
Signed-off-by: Franck Jonas <Franck.Jonas@ensimag.imag.fr>
Signed-off-by: Lucien Kong <Lucien.Kong@ensimag.imag.fr>
Signed-off-by: Thomas Nguy <Thomas.Nguy@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --exclude=t -i" did not consider anything under t/
as excluded, as it did not pay attention to exclusion of leading
paths while walking the index. Other two users of excluded() are
also updated.
* jc/ls-files-i-dir:
dir.c: make excluded() file scope static
unpack-trees.c: use path_excluded() in check_ok_to_remove()
builtin/add.c: use path_excluded()
path_excluded(): update API to less cache-entry centric
ls-files -i: micro-optimize path_excluded()
ls-files -i: pay attention to exclusion of leading paths
this also avoids calling fnmatch() if the non-wildcard prefix is
longer than basename
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elsewhere in this file is_glob_special() is also used to check for
wildcards, which is defined in ctype. Make no_wildcard() also use this
function (indirectly via simple_length())
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was stupid of me to make the API too much cache-entry specific;
the caller may want to check arbitrary pathname without having a
corresponding cache-entry to see if a path is ignored.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we know a caller that does not recurse is calling us in the index
order, we can remember the last directory we found to be excluded
and see if the path we are looking at is still inside it, in which
case we can just answer that it is excluded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git ls-files --exclude=t/ -i" does not show paths in directory t/
that have been added to the index, but it should.
The excluded() API was designed for callers who walk the tree from
the top, checking each level of the directory hierarchy as it
descends if it is excluded, and not even bothering to recurse into
an excluded directory. This would allow us optimize for a common
case by not having to check if the exclude pattern "foo/" matches
when looking at "foo/bar", because the caller should have noticed
that "foo" is excluded and did not even bother to read "foo/bar"
out of opendir()/readdir() to call it.
The code for "ls-files -i" however walks the index linearly, feeding
paths without checking if the leading directory is already excluded.
Introduce a helper function path_excluded() to let this caller
properly call excluded() check for higher hierarchies as necessary.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Return early if el->nr == 0. Unindent one more level for FNM_PATHNAME
code block as this block is getting complex and may need more
indentation.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that read_directory_recursive() (reached through read_directory())
respects the string length limit we provide, we don't need to create a
NUL-limited copy of the common prefix anymore.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A directory name is passed to read_directory_recursive() as a
length-limited string, through the parameters base and baselen.
Suprisingly, base must be a NUL-terminated string as well, as it is
passed to opendir(), ignoring baselen.
Fix this by postponing the call to opendir() until the length-limted
string is added to a strbuf, which provides a NUL in the right place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions read_directory_recursive() and treat_leading_path() both
use buffers sized to fit PATH_MAX characters. The latter can be made to
overrun its buffer, e.g. like this:
$ a=0123456789abcdef
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ git add $a/a
Instead of trying to add a check and potentionally forgetting to address
similar cases, convert the involved functions and their helpers to use
struct strbuf. The patch is suprisingly large because the helpers
treat_path() and treat_one_path() modify the buffer as well and thus need
to be converted, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
remove_dir_recursively() has a check to avoid removing the directory it
was asked to remove without recursing into it and report success when the
directory is the top level of a working tree of a nested git repository,
to protect such a repository from "clean -f" (without double -f). If a
working tree of a nested git repository is in a subdirectory of a toplevel
project, however, this protection did not apply by mistake; we forgot to
pass the REMOVE_DIR_KEEP_NESTED_GIT down to the recursive removal
codepath.
This requires us to also teach the higher level not to remove the
directory it is asked to remove, when the recursed invocation did not
remove the directory it was asked to remove due to a nested git
repository, as it is not an error to leave the parent directories of such
a nested repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the REMOVE_DIR_KEEP_TOPLEVEL flag to remove_dir_recursively() for
deleting everything inside the given directory, but _not_ the given
directory itself.
Note that this does not pass the REMOVE_DIR_KEEP_NESTED_GIT flag, if set,
to the recursive invocations of remove_dir_recursively(). It is likely to
be a a bug that has been present since REMOVE_DIR_KEEP_NESTED_GIT was
introduced (a0f4afb), but this commit keeps the same behaviour for now.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also make common_prefix_len() static as this refactoring makes dir.c
itself the only caller of this helper function.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The implementation from pathspec_prefix (slightly modified) replaces the
current common_prefix, because it also respects glob characters.
Based on a patch by Clemens Buchacher.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/struct-pathspec:
pathspec: rename per-item field has_wildcard to use_wildcard
Improve tree_entry_interesting() handling code
Convert read_tree{,_recursive} to support struct pathspec
Reimplement read_tree_recursive() using tree_entry_interesting()
As the point of the last change is to allow use of strings as
literals no matter what characters are in them, "has_wildcard"
does not match what we use this field for anymore.
It is used to decide if the wildcard matching should be used, so
rename it to match the usage better.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a last ditch effort, try rmdir(2) when we cannot read the directory
to be removed. It may be an empty directory that we can remove without
any permission, as long as we can modify its parent directory.
Noticed by Linus.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Function dir_inside_of() does something similar (correctly), but looks
easier to understand and does not bundle cwd to its business. Given
get_relative_cwd's only user is is_inside_dir, we can kill it for
good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same old problem reappears after setup code is reworked. We tend
to assume there is at least one path component in a path and forget
that path can be simply '/'.
Reported-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the make_*_path functions so it's clearer what they do, in
particlar make clear what the differnce between make_absolute_path and
make_nonrelative_path is by renaming them real_path and absolute_path
respectively. make_relative_path has an understandable name and is
renamed to relative_path to maintain the name convention.
The function calls have been replaced 1-to-1 in their usage.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
match_pathspec_depth() is a clone of match_pathspec() except that it
can take depth limit. Computation is a bit lighter compared to
match_pathspec() because it's usually precomputed and stored in struct
pathspec.
In long term, match_pathspec() and match_one() should be removed in
favor of this function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
never_interesting optimization is disabled if there is any wildcard
pathspec, even if it only matches exactly on trees.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose we have two pathspecs 'a' and 'a/b' (both are dirs) and depth
limit 1. In current code, pathspecs are checked in input order. When
'a/b' is checked against pathspec 'a', it fails depth limit and
therefore is excluded, although it should match 'a/b' pathspec.
This patch reorders all pathspecs alphabetically, then teaches
tree_entry_interesting() to check against the deepest pathspec first,
so depth limit of a shallower pathspec won't affect a deeper one.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed to replace pathspec_matches() in builtin/grep.c.
max_depth == -1 means infinite depth. Depth limit is only effective
when pathspec.recursive == 1. When pathspec.recursive == 0, the
behavior depends on match functions: non-recursive for
tree_entry_interesting() and recursive for match_pathspec{,_depth}
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old pathspec structure remains as pathspec.raw[]. New things are
stored in pathspec.items[]. There's no guarantee that the pathspec
order in raw[] is exactly as in items[].
raw[] is external (source) data and is untouched by pathspec
manipulation functions. It eases migration from old const char ** to
this new struct.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/maint-fix-add-typo-detection:
Revert "excluded_1(): support exclude files in index"
unpack-trees: fix sparse checkout's "unable to match directories"
unpack-trees: move all skip-worktree checks back to unpack_trees()
dir.c: add free_excludes()
cache.h: realign and use (1 << x) form for CE_* constants
Junio C Hamano
Antoine Pelisse
Jeff King
Nguyễn Thái Ngọc Duy
Matthieu Moy
Huynh Khoi Nguyen Nguyen
René Scharfe
Clemens Buchacher
Alex Riesen
Carlos Martín Nieto