Add an environment variable to tell Git to look into refs hierarchy
other than refs/replace/ for the object replacement data.
* mh/replace-refs:
Allow to control where the replace refs are looked for
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
It can be useful to have grafts or replace refs for specific use-cases while
keeping the default "view" of the repository pristine (or with a different
set of grafts/replace refs).
It is possible to use a different graft file with GIT_GRAFT_FILE, but while
replace refs are more powerful, they don't have an equivalent override.
Add a GIT_REPLACE_REF_BASE environment variable to control where git is
going to look for replace refs.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 45e8a74 (has_sha1_file: re-check pack directory before
giving up, 2013-08-30), we spend extra effort for
has_sha1_file to give the right answer when somebody else is
repacking. Usually this effort does not matter, because
after finding that the object does not exist, the next step
is usually to die().
However, some code paths make a large number of
has_sha1_file checks which are _not_ expected to return 1.
The collision test in index-pack.c is such a case. On a
local system, this can cause a performance slowdown of
around 5%. But on a system with high-latency system calls
(like NFS), it can be much worse.
This patch introduces a "quick" flag to has_sha1_file which
callers can use when they would prefer high performance at
the cost of false negatives during repacks. There may be
other code paths that can use this, but the index-pack one
is the most obviously critical, so we'll start with
switching that one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use the new function elsewhere in a moment.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cat-file --batch(-check)" learned the "--follow-symlinks"
option that follows an in-tree symbolic link when asked about an
object via extended SHA-1 syntax, e.g. HEAD:RelNotes that points at
Documentation/RelNotes/2.5.0.txt. With the new option, the command
behaves as if HEAD:Documentation/RelNotes/2.5.0.txt was given as
input instead.
* dt/cat-file-follow-symlinks:
cat-file: add --follow-symlinks to --batch
sha1_name: get_sha1_with_context learns to follow symlinks
tree-walk: learn get_tree_entry_follow_symlinks
Teach the index to optionally remember already seen untracked files
to speed up "git status" in a working tree with tons of cruft.
* nd/untracked-cache: (24 commits)
git-status.txt: advertisement for untracked cache
untracked cache: guard and disable on system changes
mingw32: add uname()
t7063: tests for untracked cache
update-index: test the system before enabling untracked cache
update-index: manually enable or disable untracked cache
status: enable untracked cache
untracked-cache: temporarily disable with $GIT_DISABLE_UNTRACKED_CACHE
untracked cache: mark index dirty if untracked cache is updated
untracked cache: print stats with $GIT_TRACE_UNTRACKED_STATS
untracked cache: avoid racy timestamps
read-cache.c: split racy stat test to a separate function
untracked cache: invalidate at index addition or removal
untracked cache: load from UNTR index extension
untracked cache: save to an index extension
ewah: add convenient wrapper ewah_serialize_strbuf()
untracked cache: don't open non-existent .gitignore
untracked cache: mark what dirs should be recursed/saved
untracked cache: record/validate dir mtime and reuse cached output
untracked cache: make a wrapper around {open,read,close}dir()
...
Filter scripts were run with SIGPIPE disabled on the Git side,
expecting that they may not read what Git feeds them to filter.
We however treated a filter that does not read its input fully
before exiting as an error.
This changes semantics, but arguably in a good way. If a filter
can produce its output without consuming its input using whatever
magic, we now let it do so, instead of diagnosing it as a
programming error.
* jc/ignore-epipe-in-filter:
filter_buffer_or_fd(): ignore EPIPE
copy.c: make copy_fd() report its status silently
Wire up get_sha1_with_context to call get_tree_entry_follow_symlinks
when GET_SHA1_FOLLOW_SYMLINKS is passed in flags. G_S_FOLLOW_SYMLINKS
is incompatible with G_S_ONLY_TO_DIE because the diagnosis
that ONLY_TO_DIE triggers does not at present consider symlinks, and
it would be a significant amount of additional code to allow it to
do so.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When copy_fd() function encounters errors, it emits error messages
itself, which makes it impossible for callers to take responsibility
for reporting errors, especially when they want to ignore certain
errors.
Move the error reporting to its callers in preparation.
- copy_file() and copy_file_with_time() by indirection get their
own calls to error().
- hold_lock_file_for_append(), when told to die on error, used to
exit(128) relying on the error message from copy_fd(), but now it
does its own die() instead. Note that the callers that do not
pass LOCK_DIE_ON_ERROR need to be adjusted for this change, but
fortunately there is none ;-)
- filter_buffer_or_fd() has its own error() already, in addition to
the message from copy_fd(), so this will change the output but
arguably in a better way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
Code clean-up for xdg configuration path support.
* pt/xdg-config-path:
path.c: remove home_config_paths()
git-config: replace use of home_config_paths()
git-commit: replace use of home_config_paths()
credential-store.c: replace home_config_paths() with xdg_config_home()
dir.c: replace home_config_paths() with xdg_config_home()
attr.c: replace home_config_paths() with xdg_config_home()
path.c: implement xdg_config_home()
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
Update sha1_loose_object_info() to optionally allow it to read
from a loose object file of unknown/bogus type; as the function
usually returns the type of the object it read in the form of enum
for known types, add an optional "typename" field to receive the
name of the type in textual form and a flag to indicate the reading
of a loose object file of unknown/bogus type.
Add parse_sha1_header_extended() which acts as a wrapper around
parse_sha1_header() allowing more information to be obtained.
Add unpack_sha1_header_to_strbuf() to unpack sha1 headers of
unknown/corrupt objects which have a unknown sha1 header size to
a strbuf structure. This was written by Junio C Hamano but tested
by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Hepled-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
home_config_paths() combines distinct functionality already implemented
by expand_user_path() and xdg_config_home(), and it also hard-codes the
path ~/.gitconfig, which makes it unsuitable to use for other home
config file paths. Since its use will just add unnecessary complexity to
the code, remove it.
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The XDG base dir spec[1] specifies that configuration files be stored in
a subdirectory in $XDG_CONFIG_HOME. To construct such a configuration
file path, home_config_paths() can be used. However, home_config_paths()
combines distinct functionality:
1. Retrieve the home git config file path ~/.gitconfig
2. Construct the XDG config path of the file specified by `file`.
This function was introduced in commit 21cf3227 ("read (but not write)
from $XDG_CONFIG_HOME/git/config file"). While the intention of the
function was to allow the home directory configuration file path and the
xdg directory configuration file path to be retrieved with one function
call, the hard-coding of the path ~/.gitconfig prevents it from being
used for other configuration files. Furthermore, retrieving a file path
relative to the user's home directory can be done with
expand_user_path(). Hence, it can be seen that home_config_paths()
introduces unnecessary complexity, especially if a user just wants to
retrieve the xdg config file path.
As such, implement a simpler function xdg_config_home() for constructing
the XDG base dir spec configuration file path. This function, together
with expand_user_path(), can replace all uses of home_config_paths().
[1] http://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Paul Tan <pyokagan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Access to objects in repositories that borrow from another one on a
slow NFS server unnecessarily got more expensive due to recent code
becoming more cautious in a naive way not to lose objects to pruning.
* jk/prune-mtime:
sha1_file: only freshen packs once per run
sha1_file: freshen pack objects before loose
reachable: only mark local objects as recent
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
"hash-object" learned in 5ba9a93 (hash-object: add --literally
option, 2014-09-11) to allow crafting a corrupt/broken object of
unknown type.
When the user-provided type is particularly long, however, it can
overflow the relatively small stack-based character array handed to
write_sha1_file_prepare() by hash_sha1_file() and write_sha1_file(),
leading to stack corruption (and crash). Introduce a custom helper
to allow arbitrarily long typenames just for "hash-object --literally".
[jc: Eric's original used a strbuf in the more common codepaths, and
I rewrote it to avoid penalizing the non-literally code. Bugs are mine]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 33d4221 (write_sha1_file: freshen existing objects,
2014-10-15), we update the mtime of existing objects that we
would have written out (had they not existed). For the
common case in which many objects are packed, we may update
the mtime on a single packfile repeatedly. This can result
in a noticeable performance problem if calling utime() is
expensive (e.g., because your storage is on NFS).
We can fix this by keeping a per-pack flag that lets us
freshen only once per program invocation.
An alternative would be to keep the packed_git.mtime flag up
to date as we freshen, and freshen only once every N
seconds. In practice, it's not worth the complexity. We are
racing against prune expiration times here, which inherently
must be set to accomodate reasonable program running times
(because they really care about the time between an object
being written and it becoming referenced, and the latter is
typically the last step a program takes).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pruning and repacking a repository that has an
alternate object store configured, we may traverse a large
number of objects in the alternate. This serves no purpose,
and may be expensive to do. A longer explanation is below.
Commits d3038d2 and abcb865 taught prune and pack-objects
(respectively) to treat "recent" objects as tips for
reachability, so that we keep whole chunks of history. They
built on the object traversal in 660c889 (sha1_file: add
for_each iterators for loose and packed objects,
2014-10-15), which covers both local and alternate objects.
In both cases, covering alternate objects is unnecessary, as
both commands can only drop objects from the local
repository. In the case of prune, we traverse only the local
object directory. And in the case of repacking, while we may
or may not include local objects in our pack, we will never
reach into the alternate with "repack -d". The "-l" option
is only a question of whether we are migrating objects from
the alternate into our repository, or leaving them
untouched.
It is possible that we may drop an object that is depended
upon by another object in the alternate. For example,
imagine two repositories, A and B, with A pointing to B as
an alternate. Now imagine a commit that is in B which
references a tree that is only in A. Traversing from recent
objects in B might prevent A from dropping that tree. But
this case isn't worth covering. Repo B should take
responsibility for its own objects. It would never have had
the commit in the first place if it did not also have the
tree, and assuming it is using the same "keep recent chunks
of history" scheme, then it would itself keep the tree, as
well.
So checking the alternate objects is not worth doing, and
come with a significant performance impact. In both cases,
we skip any recent objects that have already been marked
SEEN (i.e., that we know are already reachable for prune, or
included in the pack for a repack). So there is a slight
waste of time in opening the alternate packs at all, only to
notice that we have already considered each object. But much
worse, the alternate repository may have a large number of
objects that are not reachable from the local repository at
all, and we end up adding them to the traversal.
We can fix this by considering only local unseen objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git prune" used to largely ignore broken refs when deciding which
objects are still being used, which could spread an existing small
damage and make it a larger one.
* jk/prune-with-corrupt-refs:
refs.c: drop curate_packed_refs
repack: turn on "ref paranoia" when doing a destructive repack
prune: turn on ref_paranoia flag
refs: introduce a "ref paranoia" flag
t5312: test object deletion code paths in a corrupted repository
The expected call sequence is for the caller to use match_pathspec()
repeatedly on a set of pathspecs, accumulating the "hits" in a
separate array, and then call this function to diagnose a pathspec
that never matched anything, as that can indicate a typo from the
command line, e.g. "git commit Maekfile".
Many builtin commands use this function from builtin/ls-files.c,
which is not a very healthy arrangement. ls-files might have been
the first command to feel the need for such a helper, but the need
is shared by everybody who uses the "match and then report" pattern.
Move it to dir.c where match_pathspec() is defined.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most operations that iterate over refs are happy to ignore
broken cruft. However, some operations should be performed
with knowledge of these broken refs, because it is better
for the operation to choke on a missing object than it is to
silently pretend that the ref did not exist (e.g., if we are
computing the set of reachable tips in order to prune
objects).
These processes could just call for_each_rawref, except that
ref iteration is often hidden behind other interfaces. For
instance, for a destructive "repack -ad", we would have to
inform "pack-objects" that we are destructive, and then it
would in turn have to tell the revision code that our
"--all" should include broken refs.
It's much simpler to just set a global for "dangerous"
operations that includes broken refs in all iterations.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several utility functions (hashcmp and friends) that are used
for comparing object IDs (SHA-1 values). Using these functions, which
take pointers to unsigned char, with struct object_id requires tiresome
access to the sha1 member, which bloats code and violates the desired
encapsulation. Provide wrappers around these functions for struct
object_id for neater, more maintainable code. Use the new constants to
avoid the hard-coded 20s and 40s throughout the original functions.
These functions simply call the underlying pointer-to-unsigned-char
versions to ensure that any performance improvements will be passed
through to the new functions.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many places throughout the code use "unsigned char [20]" to store object IDs
(SHA-1 values). This leads to lots of hardcoded numbers throughout the
codebase. It also leads to confusion about the purposes of a buffer.
Introduce a structure for object IDs. This allows us to obtain the benefits
of compile-time checking for misuse. The structure is expected to remain
the same size and have the same alignment requirements on all known
platforms, compared to the array of unsigned char, although this is not
required for correctness.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory is updated within the same second that its timestamp
is last saved, we cannot realize the directory has been updated by
checking timestamps. Assume the worst (something is update). See
29e4d36 (Racy GIT - 2005-12-20) for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v2.2.0, we broke "git prune" that runs in a repository that
borrows from an alternate object store.
* jk/prune-mtime:
sha1_file: fix iterating loose alternate objects
for_each_loose_file_in_objdir: take an optional strbuf path
We didn't format an integer that wouldn't fit in "int" but in
"uintmax_t" correctly.
* jk/decimal-width-for-uintmax:
decimal_width: avoid integer overflow
Simplify the ref transaction API around how "the ref should be
pointing at this object" is specified.
* mh/refs-have-new:
refs.h: remove duplication in function docstrings
update_ref(): improve documentation
ref_transaction_verify(): new function to check a reference's value
ref_transaction_delete(): check that old_sha1 is not null_sha1
ref_transaction_create(): check that new_sha1 is valid
commit: avoid race when creating orphan commits
commit: add tests of commit races
ref_transaction_delete(): remove "have_old" parameter
ref_transaction_update(): remove "have_old" parameter
struct ref_update: move "have_old" into "flags"
refs.c: change some "flags" to "unsigned int"
refs: remove the gap in the REF_* constant values
refs: move REF_DELETING to refs.c
In v2.2.0, we broke "git prune" that runs in a repository that
borrows from an alternate object store.
* jk/prune-mtime:
sha1_file: fix iterating loose alternate objects
for_each_loose_file_in_objdir: take an optional strbuf path
We didn't format an integer that wouldn't fit in "int" but in
"uintmax_t" correctly.
* jk/decimal-width-for-uintmax:
decimal_width: avoid integer overflow
Change the following functions' "flags" arguments from "int" to
"unsigned int":
* ref_transaction_update()
* ref_transaction_create()
* ref_transaction_delete()
* update_ref()
* delete_ref()
* lock_ref_sha1_basic()
Also change the "flags" member in "struct ref_update" to unsigned.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We feed a root "objdir" path to this iterator function,
which then copies the result into a strbuf, so that it can
repeatedly append the object sub-directories to it. Let's
make it easy for callers to just pass us a strbuf in the
first place.
We leave the original interface as a convenience for callers
who want to just pass a const string like the result of
get_object_directory().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The decimal_width function originally appeared in blame.c as
"lineno_width", and was designed for calculating the
print-width of small-ish integer values (line numbers in
text files). In ec7ff5b, it was made into a reusable
function, and in dc801e7, we started using it to align
diffstats.
Binary files in a diffstat show byte counts rather than line
numbers, meaning they can be quite large (e.g., consider
adding or removing a 2GB file). decimal_width is not up to
the challenge for two reasons:
1. It takes the value as an "int", whereas large files may
easily surpass this. The value may be truncated, in
which case we will produce an incorrect value.
2. It counts "up" by repeatedly multiplying another
integer by 10 until it surpasses the value. This can
cause an infinite loop when the value is close to the
largest representable integer.
For example, consider using a 32-bit signed integer,
and a value of 2,140,000,000 (just shy of 2^31-1).
We will count up and eventually see that 1,000,000,000
is smaller than our value. The next step would be to
multiply by 10 and see that 10,000,000,000 is too
large, ending the loop. But we can't represent that
value, and we have signed overflow.
This is technically undefined behavior, but a common
behavior is to lose the high bits, in which case our
iterator will certainly be less than the number. So
we'll keep multiplying, overflow again, and so on.
This patch changes the argument to a uintmax_t (the same
type we use to store the diffstat information for binary
filese), and counts "down" by repeatedly dividing our value
by 10.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Long overdue departure from the assumption that S_IFMT is shared by
everybody made in 2005.
* dm/compat-s-ifmt-for-zos:
compat: convert modes to use portable file type values
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for NTFS
and FAT32; let's use it in verify_path().
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on NTFS nor FAT32.
In practice this probably doesn't matter, though, as
the restricted names are rather obscure and almost
certainly would never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectNTFS config
option. Though this is expected to be most useful on Windows,
we allow it to be set everywhere, as NTFS may be mounted on
other platforms. The variable does default to on for Windows,
though.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not allow paths with a ".git" component to be added to
the index, as that would mean repository contents could
overwrite our repository files. However, asking "is this
path the same as .git" is not as simple as strcmp() on some
filesystems.
On NTFS (and FAT32), there exist so-called "short names" for
backwards-compatibility: 8.3 compliant names that refer to the same files
as their long names. As ".git" is not an 8.3 compliant name, a short name
is generated automatically, typically "git~1".
Depending on the Windows version, any combination of trailing spaces and
periods are ignored, too, so that both "git~1." and ".git." still refer
to the Git directory. The reason is that 8.3 stores file names shorter
than 8 characters with trailing spaces. So literally, it does not matter
for the short name whether it is padded with spaces or whether it is
shorter than 8 characters, it is considered to be the exact same.
The period is the separator between file name and file extension, and
again, an empty extension consists just of spaces in 8.3 format. So
technically, we would need only take care of the equivalent of this
regex:
(\.git {0,4}|git~1 {0,3})\. {0,3}
However, there are indications that at least some Windows versions might
be more lenient and accept arbitrary combinations of trailing spaces and
periods and strip them out. So we're playing it real safe here. Besides,
there can be little doubt about the intention behind using file names
matching even the more lenient pattern specified above, therefore we
should be fine with disallowing such patterns.
Extra care is taken to catch names such as '.\\.git\\booh' because the
backslash is marked as a directory separator only on Windows, and we want
to use this new helper function also in fsck on other platforms.
A big thank you goes to Ed Thomson and an unnamed Microsoft engineer for
the detailed analysis performed to come up with the corresponding fixes
for libgit2.
This commit adds a function to detect whether a given file name can refer
to the Git directory by mistake.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of disallowing ".git" in the index is that we
would never want to accidentally overwrite files in the
repository directory. But this means we need to respect the
filesystem's idea of when two paths are equal. The prior
commit added a helper to make such a comparison for HFS+;
let's use it in verify_path.
We make this check optional for two reasons:
1. It restricts the set of allowable filenames, which is
unnecessary for people who are not on HFS+. In practice
this probably doesn't matter, though, as the restricted
names are rather obscure and almost certainly would
never come up in practice.
2. It has a minor performance penalty for every path we
insert into the index.
This patch ties the check to the core.protectHFS config
option. Though this is expected to be most useful on OS X,
we allow it to be set everywhere, as HFS+ may be mounted on
other platforms. The variable does default to on for OS X,
though.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds simple wrapper functions around calls to stat(), fstat(),
and lstat() that translate the operating system's native file type
bits to those used by most operating systems. It also rewrites the
S_IF* macros to the common values, so all file type processing is
performed using the translated modes. This makes projects portable
across operating systems that use different file type definitions.
Only the file type bits may be affected by these compatibility
functions; the file permission bits are assumed to be 07777 and are
passed through unchanged.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In linked checkouts, borrowed parts like config is taken from
$GIT_COMMON_DIR. $GIT_DIR/config is never used. Report them as
garbage.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Mike Hommey
Jeff King
Johannes Sixt
David Turner
Karthik Nayak
Paul Tan
Eric Sunshine
brian m. carlson
Nguyễn Thái Ngọc Duy
Michael Haggerty
Johannes Schindelin
David Michael