It is a bit strange, and even undesirable, to require Perl just to run
the test suite even when NO_PERL was set.
This patch does not fix this problem by any stretch of imagination.
However, it fixes *the* Perl invocation that *every single* test script
has to run.
While at it, it makes the source code also more grep'able, as the code
that unsets some, but not all, GIT_* environment variables just became a
*lot* more explicit. And all that while still reducing the total number
of lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
BusyBox comes with a ton of applets ("applet" being the identical
concept to Git's "builtins"). And similar to Git's builtins, the applets
can be called via `busybox <command>`, or the BusyBox executable can be
copied/hard-linked to the command name.
The similarities do not end here. Just as with Git's builtins, it is
problematic that BusyBox' hard-linked applets cannot easily be put into
a .zip file: .zip archives have no concept of hard-links and therefore
would store identical copies (and also extract identical copies,
"inflating" the archive unnecessarily).
To counteract that issue, MinGit already ships without hard-linked
copies of the builtins, and the plan is to do the same with BusyBox'
applets: simply ship busybox.exe as single executable, without
hard-linked applets.
To accommodate that, Git is being taught by this commit a very special
trick, exploiting the fact that it is possible to call an executable
with a command-line whose argv[0] is different from the executable's
name: when `sh` is to be spawned, and no `sh` is found in the PATH, but
busybox.exe is, use that executable (with unchanged argv).
Likewise, if any executable to be spawned is not on the PATH, but
busybox.exe is found, parse the output of `busybox.exe --help` to find
out what applets are included, and if the command matches an included
applet name, use busybox.exe to execute it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The main idea of this patch is that even if we have to look up the
absolute path of the script, if only the basename was specified as
argv[0], then we should use that basename on the command line, too, not
the absolute path.
This patch will also help with the upcoming patch where we automatically
substitute "sh ..." by "busybox sh ..." if "sh" is not in the PATH but
"busybox" is: we will do that by substituting the actual executable, but
still keep prepending "sh" to the command line.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To verify that the symlink is resolved correctly, we use the fact that
`git.exe` is a native Win32 program, and that `git.exe config -f <path>`
therefore uses the native symlink resolution.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links have a type: a "file symlink" must point at
a file, and a "directory symlink" must point at a directory. If the
type of symlink does not match its target, it doesn't work.
Git does not record the type of symlink in the index or in a tree. On
checkout it'll guess the type, which only works if the target exists
at the time the symlink is created. This may often not be the case,
for example when the link points at a directory inside a submodule.
By specifying `symlink=file` or `symlink=dir` the user can specify what
type of symlink Git should create, so Git doesn't have to rely on
unreliable heuristics.
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, symbolic links actually have a type depending on the target:
it can be a file or a directory.
In certain circumstances, this poses problems, e.g. when a symbolic link
is supposed to point into a submodule that is not checked out, so there
is no way for Git to auto-detect the type.
To help with that, we will add support over the course of the next
commits to specify that symlink type via the Git attributes. This
requires an index_state, though, something that Git for Windows'
`symlink()` replacement cannot know about because the function signature
is defined by the POSIX standard and not ours to change.
So let's introduce a helper function to create symbolic links that
*does* know about the index_state.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In https://github.com/git-for-windows/git/pull/2637, we fixed a bug
where symbolic links' target path sizes were recorded incorrectly in the
index. The downside of this fix was that every user with tracked
symbolic links in their checkouts would see them as modified in `git
status`, but not in `git diff`, and only a `git add <path>` (or `git add
-u`) would "fix" this.
Let's do better than that: we can detect that situation and simply
pretend that a symbolic link with a known bad size (or a size that just
happens to be that bad size, a _very_ unlikely scenario because it would
overflow our buffers due to the trailing NUL byte) means that it needs
to be re-checked as if we had just checked it out.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When creating directories via `safe_create_leading_directories()`, we
might encounter an already-existing directory which is not
readable by the current user. To handle that situation, Git's code calls
`stat()` to determine whether we're looking at a directory.
In such a case, `CreateFile()` will fail, though, no matter what, and
consequently `mingw_stat()` will fail, too. But POSIX semantics seem to
still allow `stat()` to go forward.
So let's call `mingw_lstat()` for the rescue if we fail to get a file
handle due to denied permission in `mingw_stat()`, and fill the stat
info that way.
We need to be careful to not allow this to go forward in case that we're
looking at a symbolic link: to resolve the link, we would still have to
create a file handle, and we just found out that we cannot. Therefore,
`stat()` still needs to fail with `EACCES` in that case.
This fixes https://github.com/git-for-windows/git/issues/2531.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
With Windows 10 Build 14972 in Developer Mode, a new flag is supported
by CreateSymbolicLink() to create symbolic links even when running
outside of an elevated session (which was previously required).
This new flag is called SYMBOLIC_LINK_FLAG_ALLOW_UNPRIVILEGED_CREATE and
has the numeric value 0x02.
Previous Windows 10 versions will not understand that flag and return an
ERROR_INVALID_PARAMETER, therefore we have to be careful to try passing
that flag only when the build number indicates that it is supported.
For more information about the new flag, see this blog post:
https://blogs.windows.com/buildingapps/2016/12/02/symlinks-windows-10/
This patch is loosely based on the patch submitted by Samuel D. Leslie
as https://github.com/git-for-windows/git/pull/1184.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Symlinks on Windows have a flag that indicates whether the target is a file
or a directory. Symlinks of wrong type simply don't work. This even affects
core Win32 APIs (e.g. DeleteFile() refuses to delete directory symlinks).
However, CreateFile() with FILE_FLAG_BACKUP_SEMANTICS doesn't seem to care.
Check the target type by first creating a tentative file symlink, opening
it, and checking the type of the resulting handle. If it is a directory,
recreate the symlink with the directory flag set.
It is possible to create symlinks before the target exists (or in case of
symlinks to symlinks: before the target type is known). If this happens,
create a tentative file symlink and postpone the directory decision: keep
a list of phantom symlinks to be processed whenever a new directory is
created in mingw_mkdir().
Limitations: This algorithm may fail if a link target changes from file to
directory or vice versa, or if the target directory is created in another
process.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement symlink() that always creates file symlinks. Fails with ENOSYS
if symlinks are disabled or unsupported.
Note: CreateSymbolicLinkW() was introduced with symlink support in Windows
Vista. For compatibility with Windows XP, we need to load it dynamically
and fail gracefully if it isnt's available.
Signed-off-by: Karsten Blees <blees@dcon.de>
This commit fixes mingw_lstat by computing the proper size for symlinks
according to POSIX. POSIX specifies that upon successful return from
lstat: "the value of the st_size member shall be set to the length of
the pathname contained in the symbolic link not including any
terminating null byte".
Prior to this commit the mingw_lstat function returned a fixed size of
4096. This caused problems in git repositories that were accessed by
git for Cygwin or git for WSL. For example, doing `git reset --hard`
using git for Windows would update the size of symlinks in the index
to be 4096; at a later time git for Cygwin or git for WSL would find
that symlinks have changed size during `git status`. Vice versa doing
`git reset --hard` in git for Cygwin or git for WSL would update the
size of symlinks in the index with the correct value, only for git for
Windows to find incorrectly at a later time that the size had changed.
Signed-off-by: Bill Zissimopoulos <billziss@navimatics.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Implement readlink() by reading NTFS reparse points. Works for symlinks
and directory junctions. If symlinks are disabled, fail with ENOSYS.
Signed-off-by: Karsten Blees <blees@dcon.de>
If symlinks are enabled, resolve all symlinks when changing directories,
as required by POSIX.
Note: Git's real_path() function bases its link resolution algorithm on
this property of chdir(). Unfortunately, the current directory on Windows
is limited to only MAX_PATH (260) characters. Therefore using symlinks and
long paths in combination may be problematic.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
MSVCRT's _wrename() cannot rename symlinks over existing files: it returns
success without doing anything. Newer MSVCR*.dll versions probably do not
have this problem: according to CRT sources, they just call MoveFileEx()
with the MOVEFILE_COPY_ALLOWED flag.
Get rid of _wrename() and call MoveFileEx() with proper error handling.
Signed-off-by: Karsten Blees <blees@dcon.de>
_wunlink() / DeleteFileW() refuses to delete symlinks to directories. If
_wunlink() fails with ERROR_ACCESS_DENIED, try _wrmdir() as well.
Signed-off-by: Karsten Blees <blees@dcon.de>
Symlinks on Windows don't work the same way as on Unix systems. E.g. there
are different types of symlinks for directories and files, creating
symlinks requires administrative privileges etc.
By default, disable symlink support on Windows. I.e. users explicitly have
to enable it with 'git config [--system|--global] core.symlinks true'.
The test suite ignores system / global config files. Allow testing *with*
symlink support by checking if native symlinks are enabled in MSys2 (via
'MSYS=winsymlinks:nativestrict').
Reminder: This would need to be changed if / when we find a way to run the
test suite in a non-MSys-based shell (e.g. dash).
Signed-off-by: Karsten Blees <blees@dcon.de>
The retry pattern is duplicated in three places. It also seems to be too
hard to use: mingw_unlink() and mingw_rmdir() duplicate the code to retry,
and both of them do so incompletely. They also do not restore errno if the
user answers 'no'.
Introduce a retry_ask_yes_no() helper function that handles retry with
small delay, asking the user, and restoring errno.
mingw_unlink: include _wchmod in the retry loop (which may fail if the
file is locked exclusively).
mingw_rmdir: include special error handling in the retry loop.
Signed-off-by: Karsten Blees <blees@dcon.de>
Git typically doesn't trust the stat.st_size member of symlinks (e.g. see
strbuf_readlink()). However, some functions take shortcuts if st_size is 0
(e.g. diff_populate_filespec()).
In mingw_lstat() and fscache_lstat(), make sure to return an adequate size.
The extra overhead of opening and reading the reparse point to calculate
the exact size is not necessary, as git doesn't rely on the value anyway.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Move S_IFLNK detection to file_attr_to_st_mode() and reuse it in fscache.
Implement DT_LNK detection in dirent.c and the fscache readdir version.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When obtaining lstat information for reparse points, we need to call
FindFirstFile() in addition to GetFileInformationEx() to obtain the type
of the reparse point (symlink, mount point etc.). However, currently there
is no error handling whatsoever if FindFirstFile() fails.
Call FindFirstFile() before modifying the stat *buf output parameter and
error out if the call fails.
Note: The FindFirstFile() return value includes all the data that we get
from GetFileAttributesEx(), so we could replace GetFileAttributesEx() with
FindFirstFile(). We don't do that because GetFileAttributesEx() is about
twice as fast for single files. I.e. we only pay the extra cost of calling
FindFirstFile() in the rare case that we encounter a reparse point.
Note: The indentation of the remaining reparse point code will be fixed in
the next patch.
Signed-off-by: Karsten Blees <blees@dcon.de>
With the new mingw_stat() implementation, do_lstat() is only called from
mingw_lstat() (with follow == 0). Remove the extra function and the old
mingw_stat()-specific (follow == 1) logic.
Signed-off-by: Karsten Blees <blees@dcon.de>
With respect to symlinks, the current stat() implementation is almost the
same as lstat(): except for the file type (st_mode & S_IFMT), it returns
information about the link rather than the target.
Implement stat by opening the file with as little permissions as possible
and calling GetFileInformationByHandle on it. This way, all link resoltion
is handled by the Windows file system layer.
If symlinks are disabled, use lstat() as before, but fail with ELOOP if a
symlink would have to be resolved.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
GetFileAttributes cannot handle paths with trailing dir separator. The
current [l]stat implementation calls GetFileAttributes twice if the path
has trailing slashes (first with the original path passed to [l]stat, and
and a second time with a path copy with trailing '/' removed).
With Unicode conversion, we get the length of the path for free and also
have a (wide char) buffer that can be modified.
Remove trailing directory separators before calling the Win32 API.
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() refuses to read link targets that exceed PATH_MAX (even
if a sufficient size was specified by the caller).
As some platforms support longer paths, remove this restriction (similar
to strbuf_getcwd()).
Signed-off-by: Karsten Blees <blees@dcon.de>
strbuf_readlink() calls readlink() twice if the hint argument specifies the
exact size of the link target (e.g. by passing stat.st_size as returned by
lstat()). This is necessary because 'readlink(..., hint) == hint' could
mean that the buffer was too small.
Use hint + 1 as buffer size to prevent this.
Signed-off-by: Karsten Blees <blees@dcon.de>
With the recent update in efee955 (gpg-interface: check gpg signature
creation status, 2016-06-17), we ask GPG to send all status updates to
stderr, and then catch the stderr in an strbuf.
But GPG might fail, and send error messages to stderr. And we simply
do not show them to the user.
Even worse: this swallows any interactive prompt for a passphrase. And
detaches stderr from the tty so that the passphrase cannot be read.
So while the first problem could be fixed (by printing the captured
stderr upon error), the second problem cannot be easily fixed, and
presents a major regression.
So let's just revert commit efee9553a4.
This fixes https://github.com/git-for-windows/git/issues/871
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To support Git Bash running in a MinTTY, we use a dirty trick to access
the MSYS2 pseudo terminal: we execute a Bash snippet that accesses
/dev/tty.
The idea was to fall back to writing to/reading from CONOUT$/CONIN$ if
that Bash call failed because Bash was not found.
However, we should fall back even in other error conditions, because we
have not successfully read the user input. Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Accessing the Windows console through the special CONIN$ / CONOUT$ devices
doesn't work properly for non-ASCII usernames an passwords.
It also doesn't work for terminal emulators that hide the native console
window (such as mintty), and 'TERM=xterm*' is not necessarily a reliable
indicator for such terminals.
The new shell_prompt() function, on the other hand, works fine for both
MSys1 and MSys2, in native console windows as well as mintty, and properly
supports Unicode. It just needs bash on the path (for 'read -s', which is
bash-specific).
On Windows, try to use the shell to read from the terminal. If that fails
with ENOENT (i.e. bash was not found), use CONIN/OUT as fallback.
Note: To test this, create a UTF-8 credential file with non-ASCII chars,
e.g. in git-bash: 'echo url=http://täst.com > cred.txt'. Then in git-cmd,
'git credential fill <cred.txt' works (shell version), while calling git
without the git-wrapper (i.e. 'mingw64\bin\git credential fill <cred.txt')
mangles non-ASCII chars in both console output and input.
Signed-off-by: Karsten Blees <blees@dcon.de>
The `git_terminal_prompt()` function expects the terminal window to be
attached to a Win32 Console. However, this is not the case with terminal
windows other than `cmd.exe`'s, e.g. with MSys2's own `mintty`.
Non-cmd terminals such as `mintty` still have to have a Win32 Console
to be proper console programs, but have to hide the Win32 Console to
be able to provide more flexibility (such as being resizeable not only
vertically but also horizontally). By writing to that Win32 Console,
`git_terminal_prompt()` manages only to send the prompt to nowhere and
to wait for input from a Console to which the user has no access.
This commit introduces a function specifically to support `mintty` -- or
other terminals that are compatible with MSys2's `/dev/tty` emulation. We
use the `TERM` environment variable as an indicator for that: if the value
starts with "xterm" (such as `mintty`'s "xterm_256color"), we prefer to
let `xterm_prompt()` handle the user interaction.
The most prominent user of `git_terminal_prompt()` is certainly
`git-remote-https.exe`. It is an interesting use case because both
`stdin` and `stdout` are redirected when Git calls said executable, yet
it still wants to access the terminal.
When running inside a `mintty`, the terminal is not accessible to the
`git-remote-https.exe` program, though, because it is a MinGW program
and the `mintty` terminal is not backed by a Win32 console.
To solve that problem, we simply call out to the shell -- which is an
*MSys2* program and can therefore access `/dev/tty`.
Helped-by: nalla <nalla@hamal.uberspace.de>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A ton of Git commands simply do not read (or at least parse) the core.*
settings. This is not good, as Git for Windows relies on the
core.longPaths setting to be read quite early on.
So let's just make sure that all commands read the config and give
platform_core_config() a chance.
This patch teaches tons of Git commands to respect the config setting
`core.longPaths = true`, including `pack-refs`, thereby fixing
https://github.com/git-for-windows/git/issues/1218
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Windows paths are typically limited to MAX_PATH = 260 characters, even
though the underlying NTFS file system supports paths up to 32,767 chars.
This limitation is also evident in Windows Explorer, cmd.exe and many
other applications (including IDEs).
Particularly annoying is that most Windows APIs return bogus error codes
if a relative path only barely exceeds MAX_PATH in conjunction with the
current directory, e.g. ERROR_PATH_NOT_FOUND / ENOENT instead of the
infinitely more helpful ERROR_FILENAME_EXCED_RANGE / ENAMETOOLONG.
Many Windows wide char APIs support longer than MAX_PATH paths through the
file namespace prefix ('\\?\' or '\\?\UNC\') followed by an absolute path.
Notable exceptions include functions dealing with executables and the
current directory (CreateProcess, LoadLibrary, Get/SetCurrentDirectory) as
well as the entire shell API (ShellExecute, SHGetSpecialFolderPath...).
Introduce a handle_long_path function to check the length of a specified
path properly (and fail with ENAMETOOLONG), and to optionally expand long
paths using the '\\?\' file namespace prefix. Short paths will not be
modified, so we don't need to worry about device names (NUL, CON, AUX).
Contrary to MSDN docs, the GetFullPathNameW function doesn't seem to be
limited to MAX_PATH (at least not on Win7), so we can use it to do the
heavy lifting of the conversion (translate '/' to '\', eliminate '.' and
'..', and make an absolute path).
Add long path error checking to xutftowcs_path for APIs with hard MAX_PATH
limit.
Add a new MAX_LONG_PATH constant and xutftowcs_long_path function for APIs
that support long paths.
While improved error checking is always active, long paths support must be
explicitly enabled via 'core.longpaths' option. This is to prevent end
users to shoot themselves in the foot by checking out files that Windows
Explorer, cmd/bash or their favorite IDE cannot handle.
Test suite:
Test the case is when the full pathname length of a dir is close
to 260 (MAX_PATH).
Bug report and an original reproducer by Andrey Rogozhnikov:
https://github.com/msysgit/git/pull/122#issuecomment-43604199
[jes: adjusted test number to avoid conflicts, added support for
chdir(), etc]
Thanks-to: Martin W. Kirst <maki@bitkings.de>
Thanks-to: Doug Kelly <dougk.ff7@gmail.com>
Original-test-by: Andrey Rogozhnikov <rogozhnikov.andrey@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
There is a problem in the way 9ac3f0e5b3 (pack-objects: fix
performance issues on packing large deltas, 2018-07-22) initializes that
mutex in the `packing_data` struct. The problem manifests in a
segmentation fault on Windows, when a mutex (AKA critical section) is
accessed without being initialized. (With pthreads, you apparently do
not really have to initialize them?)
This was reported in https://github.com/git-for-windows/git/issues/1839.
Signed-off-by: Doug Kelly <dougk.ff7@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We already avoid traversing NTFS junction points in `git clean -dfx`.
With this topic branch, we do that when the FSCache is enabled, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When updating the skip-worktree bits in the index to align with new
values in a sparse-checkout file, Git scans the entire working
directory with lstat() calls. In a sparse-checkout, many of these
lstat() calls are for paths that do not exist.
Enable the fscache feature during this scan.
In a local test of a repo with ~2.2 million paths, updating the index
with `git read-tree -m -u HEAD` with a sparse-checkout file containing
only `/.gitattributes` improved from 2-3 minutes to 15-20 seconds.
More work could be done to stop running lstat() calls when recursing
into directories that are known to not exist.
This brings substantial wins in performance because the FSCache is now
per-thread, being merged to the primary thread only at the end, so we do
not have to lock (except while merging).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Johannes Schindelin
Bert Belder
Karsten Blees
Bill Zissimopoulos
Doug Kelly
Derrick Stolee