The intention of the special "cone mode" in the sparse-checkout
feature is to always match the same patterns that are matched by the
same sparse-checkout file as when cone mode is disabled.
When a file path is given to "git sparse-checkout set" in cone mode,
then the cone mode improperly matches the file as a recursive path.
When setting the skip-worktree bits, files were not expecting the
MATCHED_RECURSIVE response, and hence these were left out of the
matched cone.
Fix this bug by checking for MATCHED_RECURSIVE in addition to MATCHED
and add a test that prevents regression.
Reported-by: Finn Bryant <finnbryant@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing documentation does not clarify how the 'set' subcommand
changes when core.sparseCheckoutCone is enabled. Correct this by
changing some language around the "A/B/C" example. Also include a
description of the input format matching the output of 'git ls-tree
--name-only'.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout patterns allow special globs according to
fnmatch(3). When writing cone-mode patterns for paths containing
these characters, they must be escaped.
Use is_glob_special() to check which characters must be escaped
this way, and add a path to the tests that contains all glob
characters at once. Note that ']' is not special, since the
initial bracket '[' is escaped.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When in cone mode, the 'git sparse-checkout list' subcommand lists
the directories included in the sparse cone. When these directories
contain odd characters, such as a backslash, then we need to use
C-style quotes similar to 'git ls-tree'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
Even more specifically, the goal is to always allow the following from
the root of a repo:
git ls-tree --name-only -d HEAD | git sparse-checkout set --stdin
The ls-tree command provides directory names with an unescaped asterisk.
It also quotes the directories that contain an escaped backslash. We
must remove these quotes, then keep the escaped backslashes.
Use unquote_c_style() when parsing lines from stdin. Command-line
arguments will be parsed as-is, assuming the user can do the correct
level of escaping from their environment to match the exact directory
names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
However, there is some care needed for the timing of these escapes. The
in-memory pattern list is used to update the working directory before
writing the patterns to disk. Thus, we need the command to have the
unescaped names in the hashsets for the cone comparisons, then escape
the patterns later.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the sparse-checkout feature uses hashset containment
queries to match paths. Make this algorithm respect escaped asterisk
(*) and backslash (\) characters.
Create dup_and_filter_pattern() method to convert a pattern by
removing escape characters and dropping an optional "/*" at the end.
This method is available in dir.h as we will use it in
builtin/sparse-checkout.c in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the sparse-checkout commmand will write patterns that
allow faster pattern matching. This matching only works if the patterns
in the sparse-checkout file are those written by that command. Users
can edit the sparse-checkout file and create patterns that cause the
cone mode matching to fail.
The cone mode patterns may end in "/*" but otherwise an un-escaped
asterisk or other glob character is invalid. Add checks to disable
cone mode when seeing these values.
A later change will properly handle escaped globs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cone mode, the shortest pattern the sparse-checkout command will
write into the sparse-checkout file is "/*". This is handled carefully
in add_pattern_to_hashsets(), so warn if any other pattern is this
short. This will assist future pattern checks by allowing us to assume
there are at least three characters in the pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command creates a restricted set of possible patterns that are used
by a custom algorithm to quickly match those patterns.
If a user manually edits the sparse-checkout file, then they could
create patterns that do not match these expectations. The cone-mode
matching algorithm can return incorrect results. The solution is to
detect these incorrect patterns, warn that we do not recognize them,
and revert to the standard algorithm.
Check each pattern for the "**" substring, and revert to the old
logic if seen. While technically a "/<dir>/**" pattern matches
the meaning of "/<dir>/", it is not one that would be written by
the sparse-checkout builtin in cone mode. Attempting to accept that
pattern change complicates the logic and instead we punt and do
not accept any instance of "**".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --sparse option was added to the clone builtin in d89f09c (clone:
add --sparse mode, 2019-11-21) and was tested with a local path clone
in t1091-sparse-checkout-builtin.sh. However, due to a difference in
how local paths are handled versus URLs, this mechanism does not work
with URLs.
Modify the test to use a "file://" URL, which would output this error
before the code change:
Cloning into 'clone'...
fatal: cannot change to 'file://.../repo': No such file or directory
error: failed to initialize sparse-checkout
These errors are due to using a "-C <path>" option to call 'git -C
<path> sparse-checkout init' but the URL is being given instead of
the target directory.
Update that target directory to evaluate this correctly. I have also
manually tested that https:// URLs are handled correctly as well.
Acked-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git init' command creates the ".git/info" directory and fills it
with some default files. However, 'git worktree add' does not create
the info directory for that worktree. This causes a problem when running
"git sparse-checkout init" inside a worktree. While care was taken to
allow the sparse-checkout config to be specific to a worktree, this
initialization was untested.
Safely create the leading directories for the sparse-checkout file. This
is the safest thing to do even without worktrees, as a user could delete
their ".git/info" directory and expect Git to recover safely.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1091-sparse-checkout-builtin.sh uses here-docs to populate the
expected contents of the sparse-checkout file. These do not use
shell interpolation, so use "-\EOF" instead of "-EOF". Also use
proper tabbing.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing the sparse-checkout feature, we need to compare the
contents of the working-directory against some expected output.
Using here-docs was useful in the beginning, but became repetetive
as the test script grew.
Create a check_files helper to make the tests simpler and easier
to extend. It also reduces instances of bad here-doc whitespace.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'git submodule (init|deinit)' a user can select a subset of
submodules to populate. This behaves very similar to the sparse-checkout
feature, but those directories contain their own .git directory
including an object database and ref space. To have the sparse-checkout
file also determine if those files should exist would easily cause
problems. Therefore, keeping these features independent in this way
is the best way forward.
Also create a test that demonstrates this behavior to make sure
it doesn't change as the sparse-checkout feature evolves.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When core.sparseCheckoutCone is enabled, the 'git sparse-checkout set'
command takes a list of directories as input, then creates an ordered
list of sparse-checkout patterns such that those directories are
recursively included and all sibling entries along the parent directories
are also included. Listing the patterns is less user-friendly than the
directories themselves.
In cone mode, and as long as the patterns match the expected cone-mode
pattern types, change the output of 'git sparse-checkout list' to only
show the directories that created the patterns.
With this change, the following piped commands would not change the
working directory:
git sparse-checkout list | git sparse-checkout set --stdin
The only time this would not work is if core.sparseCheckoutCone is
true, but the sparse-checkout file contains patterns that do not
match the expected pattern types for cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On FreeBSD, when executed by root ls enables the '-A' option:
-A Include directory entries whose names begin with a dot (`.')
except for . and ... Automatically set for the super-user unless
-I is specified.
As a result the .git directory appeared in the output when run as root.
Simulate no-dotfile ls behaviour using a shell glob.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Ed Maste <emaste@FreeBSD.org>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user uses the sparse-checkout feature in cone mode, they
add patterns using "git sparse-checkout set <dir1> <dir2> ..."
or by using "--stdin" to provide the directories line-by-line over
stdin. This behaviour naturally looks a lot like the way a user
would type "git add <dir1> <dir2> ..."
If core.ignoreCase is enabled, then "git add" will match the input
using a case-insensitive match. Do the same for the sparse-checkout
feature.
Perform case-insensitive checks while updating the skip-worktree
bits during unpack_trees(). This is done by changing the hash
algorithm and hashmap comparison methods to optionally use case-
insensitive methods.
When this is enabled, there is a small performance cost in the
hashing algorithm. To tease out the worst possible case, the
following was run on a repo with a deep directory structure:
git ls-tree -d -r --name-only HEAD |
git sparse-checkout set --stdin
The 'set' command was timed with core.ignoreCase disabled or
enabled. For the repo with a deep history, the numbers were
core.ignoreCase=false: 62s
core.ignoreCase=true: 74s (+19.3%)
For reproducibility, the equivalent test on the Linux kernel
repository had these numbers:
core.ignoreCase=false: 3.1s
core.ignoreCase=true: 3.6s (+16%)
Now, this is not an entirely fair comparison, as most users
will define their sparse cone using more shallow directories,
and the performance improvement from eb42feca97 ("unpack-trees:
hash less in cone mode" 2019-11-21) can remove most of the
hash cost. For a more realistic test, drop the "-r" from the
ls-tree command to store only the first-level directories.
In that case, the Linux kernel repository takes 0.2-0.25s in
each case, and the deep repository takes one second, plus or
minus 0.05s, in each case.
Thus, we _can_ demonstrate a cost to this change, but it is
unlikely to matter to any reasonable sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-merge performed by 'git sparse-checkout' will erase any staged
changes, which can lead to data loss. Prevent these attempts by requiring
a clean 'git status' output.
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout init' subcommand previously wrote directly
to the sparse-checkout file and then updated the working directory.
This may fail if there are modified files not included in the initial
pattern set. However, that left a populated sparse-checkout file.
Use the in-process working directory update to guarantee that the
init subcommand only changes the sparse-checkout file if the working
directory update succeeds.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the development of the sparse-checkout "cone mode" feature,
an incorrect placement of the initializer for "use_cone_patterns = 1"
caused warnings to show up when a .gitignore file was present with
non-cone-mode patterns. This was fixed in the original commit
introducing the cone mode, but now we should add a test to avoid
hitting this problem again in the future.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If two 'git sparse-checkout set' subcommands are launched at the
same time, the behavior can be unexpected as they compete to write
the sparse-checkout file and update the working directory.
Take a lockfile around the writes to the sparse-checkout file. In
addition, acquire this lock around the working directory update
to avoid two commands updating the working directory in different
ways.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout disable' subcommand returns a user to a
full working directory. The old process for doing this required
updating the sparse-checkout file with the "/*" pattern and then
updating the working directory with core.sparseCheckout enabled.
Finally, the sparse-checkout file could be removed and the config
setting disabled.
However, it is valuable to keep a user's sparse-checkout file
intact so they can re-enable the sparse-checkout they previously
used with 'git sparse-checkout init'. This is now possible with
the in-process mechanism for updating the working directory.
Reported-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout builtin used 'git read-tree -mu HEAD' to update the
skip-worktree bits in the index and to update the working directory.
This extra process is overly complex, and prone to failure. It also
requires that we write our changes to the sparse-checkout file before
trying to update the index.
Remove this extra process call by creating a direct call to
unpack_trees() in the same way 'git read-tree -mu HEAD' does. In
addition, provide an in-memory list of patterns so we can avoid
reading from the sparse-checkout file. This allows us to test a
proposed change to the file before writing to it.
An earlier version of this patch included a bug when the 'set' command
failed due to the "Sparse checkout leaves no entry on working directory"
error. It would not rollback the index.lock file, so the replay of the
old sparse-checkout specification would fail. A test in t1091 now
covers that scenario.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a user provides folders A/ and A/B/ for inclusion in a cone-mode
sparse-checkout file, the parsing logic will notice that A/ appears
both as a "parent" type pattern and as a "recursive" type pattern.
This is unexpected and hence will complain via a warning and revert
to the old logic for checking sparse-checkout patterns.
Prevent this from happening accidentally by sanitizing the folders
for this type of inclusion in the 'git sparse-checkout' builtin.
This happens in two ways:
1. Do not include any parent patterns that also appear as recursive
patterns.
2. Do not include any recursive patterns deeper than other recursive
patterns.
In order to minimize duplicate code for scanning parents, create
hashmap_contains_parent() method. It takes a strbuf buffer to
avoid reallocating a buffer when calling in a tight loop.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a large repository has many sparse-checkout patterns, the
process for updating the skip-worktree bits can take long enough
that a user gets confused why nothing is happening. Update the
clear_ce_flags() method to write progress.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature in "cone mode" can use the fact that
the recursive patterns are "connected" to the root via parent
patterns to decide if a directory is entirely contained in the
sparse-checkout or entirely removed.
In these cases, we can skip hashing the paths within those
directories and simply set the skipworktree bit to the correct
value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make the cone pattern set easy to use, update the behavior of
'git sparse-checkout (init|set)'.
Add '--cone' flag to 'git sparse-checkout init' to set the config
option 'core.sparseCheckoutCone=true'.
When running 'git sparse-checkout set' in cone mode, a user only
needs to supply a list of recursive folder matches. Git will
automatically add the necessary parent matches for the leading
directories.
When testing 'git sparse-checkout set' in cone mode, check the
error stream to ensure we do not see any errors. Specifically,
we want to avoid the warning that the patterns do not match
the cone-mode patterns.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parent and recursive patterns allowed by the "cone mode"
option in sparse-checkout are restrictive enough that we
can avoid using the regex parsing. Everything is based on
prefix matches, so we can use hashsets to store the prefixes
from the sparse-checkout file. When checking a path, we can
strip path entries from the path and check the hashset for
an exact match.
As a test, I created a cone-mode sparse-checkout file for the
Linux repository that actually includes every file. This was
constructed by taking every folder in the Linux repo and creating
the pattern pairs here:
/$folder/
!/$folder/*/
This resulted in a sparse-checkout file sith 8,296 patterns.
Running 'git read-tree -mu HEAD' on this file had the following
performance:
core.sparseCheckout=false: 0.21 s (0.00 s)
core.sparseCheckout=true: 3.75 s (3.50 s)
core.sparseCheckoutCone=true: 0.23 s (0.01 s)
The times in parentheses above correspond to the time spent
in the first clear_ce_flags() call, according to the trace2
performance traces.
While this example is contrived, it demonstrates how these
patterns can slow the sparse-checkout feature.
Helped-by: Eric Wong <e@80x24.org>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature can have quadratic performance as
the number of patterns and number of entries in the index grow.
If there are 1,000 patterns and 1,000,000 entries, this time can
be very significant.
Create a new Boolean config option, core.sparseCheckoutCone, to
indicate that we expect the sparse-checkout file to contain a
more limited set of patterns. This is a separate config setting
from core.sparseCheckout to avoid breaking older clients by
introducing a tri-state option.
The config option does nothing right now, but will be expanded
upon in a later commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git updates the working directory with the sparse-checkout
feature enabled, the unpack_trees() method calls clear_ce_flags()
to update the skip-wortree bits on the cache entries. This
check can be expensive, depending on the patterns used.
Add trace2 regions around the method, including some flag
information, so we can get granular performance data during
experiments. This data will be used to measure improvements
to the pattern-matching algorithms for sparse-checkout.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The instructions for disabling a sparse-checkout to a full
working directory are complicated and non-intuitive. Add a
subcommand, 'git sparse-checkout disable', to perform those
steps for the user.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
and places them in the sparse-checkout file. Then, it updates the
working directory to match those patterns. For a large list of
patterns, the command-line call can get very cumbersome.
Add a '--stdin' option to instead read patterns over standard in.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git sparse-checkout set' subcommand takes a list of patterns
as arguments and writes them to the sparse-checkout file. Then, it
updates the working directory using 'git read-tree -mu HEAD'.
The 'set' subcommand will replace the entire contents of the
sparse-checkout file. The write_patterns_and_update() method is
extracted from cmd_sparse_checkout() to make it easier to implement
'add' and/or 'remove' subcommands in the future.
If the core.sparseCheckout config setting is disabled, then enable
the config setting in the worktree config. If we set the config
this way and the sparse-checkout fails, then re-disable the config
setting.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When someone wants to clone a large repository, but plans to work
using a sparse-checkout file, they either need to do a full
checkout first and then reduce the patterns they included, or
clone with --no-checkout, set up their patterns, and then run
a checkout manually. This requires knowing a lot about the repo
shape and how sparse-checkout works.
Add a new '--sparse' option to 'git clone' that initializes the
sparse-checkout file to include the following patterns:
/*
!/*/
These patterns include every file in the root directory, but
no directories. This allows a repo to include files like a
README or a bootstrapping script to grow enlistments from that
point.
During the 'git sparse-checkout init' call, we must first look
to see if HEAD is valid, since 'git clone' does not have a valid
HEAD at the point where it initializes the sparse-checkout. The
following checkout within the clone command will create the HEAD
ref and update the working directory correctly.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Getting started with a sparse-checkout file can be daunting. Help
users start their sparse enlistment using 'git sparse-checkout init'.
This will set 'core.sparseCheckout=true' in their config, write
an initial set of patterns to the sparse-checkout file, and update
their working directory.
Make sure to use the `extensions.worktreeConfig` setting and write
the sparse checkout config to the worktree-specific config file.
This avoids confusing interactions with other worktrees.
The use of running another process for 'git read-tree' is sub-
optimal. This will be removed in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash save" in a working tree that is sparsely checked out
mistakenly removed paths that are outside the area of interest.
* js/update-index-ignore-removal-for-skip-worktree:
stash: handle staged changes in skip-worktree files correctly
update-index: optionally leave skip-worktree entries alone
The custom format for "git log --format=<format>" learned the l/L
placeholder that is similar to e/E that fills in the e-mail
address, but only the local part on the left side of '@'.
* pb/pretty-email-without-domain-part:
pretty: add "%aL" etc. to show local-part of email addresses
t4203: use test-lib.sh definitions
t6006: use test-lib.sh definitions
Code clean-up and a bugfix in the logic used to tell worktree local
and repository global refs apart.
* sg/dir-trie-fixes:
path.c: don't call the match function without value in trie_find()
path.c: clarify two field names in 'struct common_dir'
path.c: mark 'logs/HEAD' in 'common_list' as file
path.c: clarify trie_find()'s in-code comment
Documentation: mention more worktree-specific exceptions
The code to generate multi-pack index learned to show (or not to
show) progress indicators.
* wb/midx-progress:
multi-pack-index: add [--[no-]progress] option.
midx: honor the MIDX_PROGRESS flag in midx_repack
midx: honor the MIDX_PROGRESS flag in verify_midx_file
midx: add progress to expire_midx_packs
midx: add progress to write_midx_file
midx: add MIDX_PROGRESS flag
When all files from some subdirectory were renamed to the root
directory, the directory rename heuristics would fail to detect that
as a rename/merge of the subdirectory to the root directory, which has
been corrected.
* en/merge-recursive-directory-rename-fixes:
t604[236]: do not run setup in separate tests
merge-recursive: fix merging a subdirectory into the root directory
merge-recursive: clean up get_renamed_dir_portion()
"git rebase --preserve-merges" has been marked as deprecated; this
release stops advertising it in the "git rebase -h" output.
* js/rebase-deprecate-preserve-merges:
rebase: hide --preserve-merges option
Derrick Stolee
Jeff King
Ed Maste
Jeff Hostetler
Junio C Hamano