"git blame MAKEFILE" run in a history that has "Makefile" but not
MAKEFILE can get confused on a case insensitive filesystem, because
the check we run to see if there is a corresponding file in the
working tree with lstat("MAKEFILE") succeeds. In addition to that
check, we have to make sure that the given path also exists in the
commit we start digging history from (i.e. "HEAD").
Note that this reveals the breakage in a test added in cd8ae20
(git-blame shouldn't crash if run in an unmerged tree, 2007-10-18),
which expects the entire merge-in-progress path to be blamed to the
working tree when it did not exist in our tree. As it is clear in
the log message of that commit, the old breakage was that it was
causing an internal error and the fix was about avoiding it.
Just check that the command does not die an uncontrolled death. For
this particular case, the blame should fail, as the history for the
file in that contents has not been committed yet at the point in the
test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option to autosquash is only used in case of an interactive rebase.
When merges are preserved, rebase uses an interactive rebase internally,
but in this case autosquash should still be disabled.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cc: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git rebase" was given a bad commit to replay the history on,
its error message did not correctly give the command line argument
it had trouble parsing.
By Erik Faye-Lund
* ef/maint-rebase-error-message:
rebase: report invalid commit correctly
"git grep -e '$pattern'", unlike the case where the patterns are read from
a file, did not treat individual lines in the given pattern argument as
separate regular expressions as it should.
By René Scharfe
* rs/maint-grep-F:
grep: stop leaking line strings with -f
grep: support newline separated pattern list
grep: factor out do_append_grep_pat()
grep: factor out create_grep_pat()
An author/committer name that is a single character was mishandled as an
invalid name by mistake.
By Jeff King
* jk/ident-split-fix:
fix off-by-one error in split_ident_line
"git checkout" gave progress display even when the standard error
stream was not connected to the tty, which made little sense.
By Avery Pennarun
* ap/checkout-no-progress-for-non-tty:
checkout: no progress messages if !isatty(2).
In 20fc9bc (Set HTTP user agent to git/GIT_VERSION, 2006-04-04),
http.o started recording GIT_VERSION, but http.o wasn't added
to the list of files that depends on GIT-VERSION-FILE.
Fix this, so mofications to GIT-VERSION-FILE will result in an
updated user-agent string.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 9765b6a (rebase: align variable content, 2011-02-06), the code
to error out was moved up one level. Unfortunately, one reference
to a function parameter wasn't rewritten as it should, leading to
the wrong parameter being errored on.
This error was propagated by 71786f5 (rebase: factor out reference
parsing, 2011-02-06) and merged in 78c6e0f (Merge branch
'mz/rebase', 2011-04-28).
Correct this by reporting $onto_name istead.
Reported-By: Manuela Hutter <manuelah@opera.com>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule repository uses alternate object store mechanism, some
commands that were started from the superproject did not notice it and
failed with "No such object" errors. The subcommands of "git submodule"
command that recursed into the submodule in a separate process were OK;
only the ones that cheated and peeked directly into the submodule's
repository from the primary process were affected.
By Heiko Voigt
* hv/submodule-alt-odb:
teach add_submodule_odb() to look for alternates
The directory path used in "git diff --no-index", when it recurses
down, was broken with a recent update after v1.7.10.1 release.
By Bobby Powers
* bp/diff-no-index-strbuf-fix:
diff --no-index: don't leak buffers in queue_diff
diff --no-index: reset temporary buffer lengths on directory iteration
When adding the information from a tag, put an empty line between the
message of the tag and the commented-out signature verification
information.
At least for the kernel workflow, I often end up re-formatting the message
that people send me in the tag data. In that situation, putting the tag
message and the tag signature verification back-to-back then means that
normal editor "reflow parapgraph" command will get confused and think that
the signature is a continuation of the last message paragraph.
So I always end up having to first add an empty line, and then go back and
reflow the last paragraph. Let's just do it in git directly.
The extra vertical space also makes the verification visually stand out
more from the user-supplied message, so it looks a bit more readable to me
too, but that may be just an odd personal preference.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the FILES section of the git-config(1) manual:
$GIT_DIR/config::
Repository specific configuration file. (The filename is
of course relative to the repository root, not the working
directory.)
That's confusing because $GIT_DIR really is relative to the working
directory.
$ GIT_DIR=.git GIT_EDITOR='pwd; echo editing'
$ export GIT_DIR GIT_EDITOR
$ git config --edit --local
/home/jrn/src/git/Documentation
editing .git/config
It turns out that the comment is a remnant from older days when the
heading said ".git/config" (which is indeed relative to the top of the
worktree).
It was only when the heading was changed to refer more precisely to
<git dir>/config (see v1.5.3.2~18, AsciiDoc tweak to avoid leading
dot, 2007-09-14) that the parenthesis stopped making sense. Remove
it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
* jk/maint-status-porcelain-z-b:
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
If stderr isn't a tty, we shouldn't be printing incremental progress
messages. In particular, this affects 'git checkout -f . >&logfile'
unless you provided -q. And git-new-workdir has no way to provide -q.
It would probably be better to have progress.c check isatty(2) all the time,
but that wouldn't allow things like 'git push --progress' to force progress
reporting to on, so I won't try to solve the general case right now.
Actual fix suggested by Jeff King.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default compiler and cflags were mostly "works for me"
when I built the original version. We need to be much less
careful here than usual, because we know we are building
only on OS X. But it's only polite to at least respect the
CFLAGS and CC definitions that the user may have provided
earlier.
While we're at it, let's update our definitions and rules to
be more like the top-level Makefile; default our CFLAGS to
include -O2, and make sure we use CFLAGS and LDFLAGS when
linking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a commit object has a header line at the end of the
buffer that is missing its newline (or if it appears so
because the content on the header line contains a stray
NUL), then git will segfault.
Interestingly, this case is explicitly handled and we do
correctly scan the final line for the header we are looking
for. But if we don't find it, we will dereference NULL while
trying to look at the next line.
Git will never generate such a commit, but it's good to be
defensive. We could die() in such a case, but since it's
easy enough to handle it gracefully, let's just issue a
warning and continue (so you could still view such a commit
with "git show", though you might be missing headers after
the NUL).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse the name and email from a commit to
pretty-print them, we usually can just put the result
directly into our strbuf result. However, if we are going to
use the mailmap, then we must first copy them into a
NUL-terminated buffer to feed to the mailmap machinery.
We did so by using strlcpy into a static buffer, but we used
it wrong. We fed it the length of the substring we wanted to
copy, but never checked that that length was less than the
size of the destination buffer.
The simplest fix is to just use snprintf to copy the
substring properly while still respecting the destination
buffer's size. It might seem like replacing the static
buffer with a strbuf would help, but we need to feed a
static buffer to the mailmap machinery anyway, so there's
not much benefit to handling arbitrary sizes.
A more ideal solution would be for mailmap to grow an
interface that:
1. Takes a pointer and length combination, instead of
assuming a NUL-terminated string.
2. Returns a pointer to the mailmap's allocated string,
rather than copying it into the buffer.
Then we could avoid the need for an extra buffer entirely.
However, doing this would involve a lot of refactoring of
mailmap and of string_list (which mailmap uses to store the
map itself). For now, let's do the simplest thing to fix the
bug.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 4b340cf split the logic to parse an ident line out of
pretty.c's format_person_part. But in doing so, it
accidentally introduced an off-by-one error that caused it
to think that single-character names were invalid.
This manifested itself as the "%an" format failing to show
anything at all for a single-character name.
Reported-by: Brian Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When reading patterns from a file, we pass the lines as allocated string
buffers to append_grep_pat() and never free them. That's not a problem
because they are needed until the program ends anyway.
However, now that the function duplicates the pattern string, we can
reuse the strbuf after calling that function. This simplifies the code
a bit and plugs a minor memory leak.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, patterns that contain newline characters don't match anything
when given to git grep. Regular grep(1) interprets patterns as lists of
newline separated search strings instead.
Implement this functionality by creating and inserting extra grep_pat
structures for patterns consisting of multiple lines when appending to
the pattern lists. For simplicity, all pattern strings are duplicated.
The original pattern is truncated in place to make it contain only the
first line.
Requested-by: Torne (Richard Coles) <torne@google.com>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add do_append_grep_pat() as a shared function for adding patterns to
the header pattern list and the general pattern list.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add create_grep_pat(), a shared helper for all grep pattern allocation
and initialization needs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We fairly consistently say "superproject" and never "supermodule" these
days. But there are seven occurrences of "supermodule" left in the current
work tree. Three appear in Release Notes for 1.5.3 and 1.7.7, three in
test names and one in a C-code comment.
Replace all occurrences of "supermodule" outside of the Release Notes
(which shouldn't be changed after the fact) with "superproject" for
consistency.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case shows a bug in 'rebase -p', but even if the bug were fixed
the test would fail because it did not ensure that the preconditions match
the postconditions that were checked. Insert the suitable 'git checkout'.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
queue_diff uses two strbufs, and at the end of the function
strbuf_reset was called. This only reset the length of the buffer -
any allocated memory was leaked. Using strbuf_release fixes this.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 875b91b (diff --no-index: use strbuf for temporary pathnames,
2012-04-25) introduced a regression when using diff --no-index with
directories. When iterating through a directory, the switch to strbuf
from heap-allocated char arrays caused paths to form like 'dir/file1',
'dir/file1file2', rather than 'dir/file1', 'dir/file2' as expected.
Avoid this by resetting the paths variables to their original length
before each iteration.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Reviewed-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we allow to link other object databases when loading a submodules
database we should also load possible alternates.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Ralf Thielow (6) and others
via Jiang Xin
* 'maint' of git://github.com/git-l10n/git-po:
l10n: zh_CN.po: translate 1 new message
l10n: de.po: translate one new message
l10n: de.po: unify translation of "ahead" and "behind"
l10n: de.po: collection of improvements
l10n: de.po: translate "remote" as "extern"
l10n: de.po: translate "track" as "beobachten"
l10n: add new members to German translation team
l10n: de.po: collection of suggestions
l10n: de.po: translate "bad" as "ungültig" ("invalid")
l10n: de.po: hopefully uncontroversial fixes
l10n: de.po: translate "bare" as "bloß"
l10n: Update git.pot (1 new messages)
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
Running "git checkout" on an unborn branch used to corrupt HEAD
(regression in 1.7.10); this makes it error out.
By Erik Faye-Lund
* ef/checkout-empty:
checkout: do not corrupt HEAD on empty repo
By Jan Krüger (1) and Junio C Hamano (1)
* jk/maint-tformat-with-z:
log-tree: the previous one is still not quite right
log-tree: use custom line terminator in line termination mode
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Some time ago, "git clone" lost the progress output for its "checkout"
phase; when run without any "--quiet" option, it should give progress to
the lengthy operation.
By Erik Faye-Lund
* ef/maint-clone-progress-fix:
clone: fix progress-regression
Junio C Hamano
Vincent van Ravesteijn
Johannes Schindelin
Erik Faye-Lund
Peter Krefting
Linus Torvalds
Jonathan Nieder
Avery Pennarun
Jeff King
René Scharfe
Jens Lehmann
Johannes Sixt
Bobby Powers
Ralf Thielow
Jiang Xin
Heiko Voigt