This PR makes it so the path to nuget in this repo is prepended. This
will make it so the local `nuget.exe` is prioritised before looking for
nuget in `PATH`.
## Validation Steps Performed
Run `razzle.cmd`, the local instance of nuget is utilised.
Delete `nuget.exe`, `razzle.cmd` uses `nuget.exe` specificed in the
`PATH`.
Closes#1111
This adds logic to get the DA1 report from the hosting terminal on
startup. We then use the information to figure out if it supports
rectangular area operations. If so, we can use DECCRA/DECFRA to
implement ScrollConsoleScreenBuffer.
This additionally changes `ScrollConsoleScreenBuffer` to always
forbid control characters as the fill character, even in conhost
(via `VtIo::SanitizeUCS2`). My hope is that this makes the API
more consistent and robust as it avoids another source for
invisible control characters in the text buffer.
Part of #17643
## Validation Steps Performed
* New tests ✅
Split off from #17510:
* `Viewport::Clamp` used `std::clamp` to calculate the intersection
between two rectangles. That works for exclusive rectangles,
because `.left == .right` indicates an empty rectangle.
But `Viewport` is an inclusive one, and so `.left == .right` is
non-empty. For instance, if the to-be-clamped rect is fully
outside the bounding rect, the result is a 1x1 viewport.
In effect this meant that `Viewport::Clamp` never clamped so far.
* The `targetArea < targetBuffer.size()` check is the wrong way around.
It should be `targetArea > targetBuffer.size()`.
* The `sourceSize` and `targetSize` checks are incorrect, because the
rectangles may be non-empty but outside the valid bounding rect.
* If these sizes were empty, we'd return the requested rectangle which
is a regression since conhost v1 and violates the API contract.
* The `sourceRect` emptiness check is incorrect, because the clamping
logic before it doesn't actually clamp to the bounding rect.
* The entire clamping and iteration logic is just overall too complex.
This fixes some more issues not properly covered by #17526:
* Fixed `_locComment_text` comments being effectively ignored.
* Fixed line splitting of comments (CRLF vs LF).
* Fixed BOM suppression.
* Fixed support for having multiple `{Locked=...}` comments.
* Modified `Generate-PseudoLocalizations.ps1` to find the .xml files.
(As opposed to .resw for the other translations.)
* Added support for the new format by adding new XPath expressions,
and stripping comments/attributes as needed.
* Fixed `PreserveWhitespace` during XML loading.
* Fixed compliance with PowerShell's strict mode.
## Validation Steps Performed
Ran it locally and compared the results. ✅
This adds support for specifying more than one font family using a
syntax that is similar to CSS' `font-family` property.
The implementation is straight-forward and is effectively
just a wrapper around `IDWriteFontFallbackBuilder`.
Closes#2664
## PR Checklist
* Font fallback
* Write "「猫」"
* Use "Consolas" and remember the shape of the glyphs
* Use "Consolas, MS Gothic" and check that it changed ✅
* Settings UI autocompletion
* It completes ✅
* It filters ✅
* It recognizes commas and starts a new name ✅
* All invalid font names are listed in the warning message ✅
---------
Co-authored-by: Dustin L. Howett <duhowett@microsoft.com>
More prerequisite work for Action IDs - turns out if we add the action
IDs to the actions defined in `defaults.json` the string ends up being
too large and the compiler complains about it. Use a `.rc` file for
`defaults.json` instead and also for `enableColorSelection.json` +
`userDefaults.json`.
This pull request removes the need for the SettingsModel tests to run in
a UAP harness and puts them into the standard CI rotation.
This required some changes to `Run-Tests.ps1` to ensure that the right
`te.exe` is selected for each test harness. It's a bit annoying, but for
things that depend on a `resources.pri`, that file must be in the same
directory as the EXE that is hosting the test. Not the DLL, mind you,
the EXE. In our case, that's `TE.ProcessHost.exe`
The bulk of the change is honestly namespace tidying.
Co-authored-by: Mike Griese <migrie@microsoft.com>
Co-authored-by: Leonard Hecker <lhecker@microsoft.com>
I thought, "what if I could just have a script make all the releases,
tags and names and upload all the assets to the right place?"
So, here's that script.
It makes the output less cluttered and more correct (for example:
ServicingPipeline no longer tries to service two copies of each commit
if there's a merge in the history...)
Obviously, icons are all wrong. Color is about right but they need CAN
icons.
I'll leave that as an exercise for @DHowett to generate the right ones
as a follow-up.
Related to #774
`IInputEvent` makes adding Unicode support to `InputBuffer` more
difficult than necessary as the abstract class makes downcasting
as well as copying quite verbose. I found that using `INPUT_RECORD`s
directly leads to a significantly simplified implementation.
In addition, this commit fixes at least one bug: The previous approach
to detect the null key via `DoActiveModifierKeysMatch` didn't work.
As it compared the modifier keys as a bitset with `==` it failed to
match whenever the numpad key was set, which it usually is.
## Validation Steps Performed
* Unit and feature tests are ✅
This commit fixes a number of issues around horizontal scrolling.
DxEngine only had one bug, where the clip rect would cause any content
outside of the actual viewport to be invisible. AtlasEngine had more
bugs, mostly around the conversion from textbuffer-relative coordinates
to viewport-relative coordinates, since AtlasEngine stores things like
the cursor position, attributes, etc., relative to the viewport.
It also renames `cellCount` to `viewportCellCount`, because I realized
that it might have to deal with a `textBufferCellCount` or similar in
the future. I hope that the new name is more descriptive of what it
refers to.
Future improvements to AtlasEngine in particular would be to not copy
the entire `Settings` struct every time the horizontal scroll offset
changes, and to trim trailing whitespace before shaping text.
This is in preparation for #1860
## Validation Steps Performed
* Patch `RenderingTests` to run in the main (and not alt) buffer
* Horizontal scrolling of line renditions and attributes works ✅
* Selection retains its position (mostly) ✅
benchcat, "bc" for short, is a tool that I've written over the last
two years to help me benchmark OpenConsole and Windows Terminal.
Initially it only measured the time it took to print a file as fast as
possible, but it's grown to support a number of arguments, including
chunk (`WriteFile` call) sizes, repeat counts and VT mode with italic
and colorized output. In the future I also wish to add a way to
generate the output data on the fly via command line arguments.
One unusual trait of benchcat is that it is compiled entirely without
CRT and vcruntime. I did this so that I could test it on Windows XP.
Also, it's kind of funny seeing how it's only about 11kB.
This commit also fixes a couple `$LASTEXITCODE` cases, because our
spellchecker was bothering me a lot with this PR and so I just fixed it.
Fixes the broken types for `TextAttribute`, `til::size`, `til::point`
and `til::rect` and adds a new type for `TextBuffer` which without
this would now be much harder to inspect due to introduction of
the manual virtual memory management in 612b00c.
Before process model v3, each Terminal window was running in its own process, each with its own CWD. This allowed `startingDirectory: .` to work relative to the terminal's own CWD. However, now all windows share the same process, so there can only be one CWD. That's not great - folks who right-click "open in terminal", then "Use parent process directory" are only ever going to be able to use the CWD of the _first_ terminal opened.
This PR remedies this issue, with a theory we had for another issue. Essentially, we'll give each Terminal window a "virtual" CWD. The Terminal isn't actually in that CWD, the terminal is in `system32`. This also will prevent the Terminal from locking the directory it was originally opened in.
* Closes#5506
* There wasn't a 1.18 issue for "Use parent process directory is broken" yet, presumably selfhosters aren't using that feature
* Related to #14957
Many more notes on this topic in https://github.com/microsoft/terminal/issues/4637#issuecomment-1531979200
> **Warning**
> ## Breaking change‼️
This will break a profile like
```json
{
"commandline": "media-test.exe",
"name": "Use CWD for media-test",
"startingDirectory": "."
},
```
if the user right-clicks "open in terminal", then attempts to open that profile. There's some theoretical work we could do in a follow up to fix this, but I'm inclined to say that relative paths for `commandline`s were already dangerous and should have been avoided.
This is practically a from scratch rewrite of AtlasEngine.
The initial approach used a very classic monospace text renderer, where
the viewport is subdivided into cells and each cell is assigned one
glyph texture, just like how real terminals used to work.
While we knew that it would have problems with overly large glyphs,
like those found in less often used languages, we didn't expect the
absolutely massive number of fonts that this approach would break.
For one, the assumption that monospace fonts are actually mostly
monospace has turned out to be a complete lie and we can't force users
to use better designed fonts. But more importantly, we can't just
design an entire Unicode fallback font collection from scratch where
every major glyph is monospace either. This is especially problematic
for vertical overhangs which are extremely difficult to handle in a
way that outperforms the much simpler alternative approach:
Just implementing a bog-standard, modern, quad-based text renderer.
Such an approach is both, less code and runs faster due to a less
complex CPU-side. The text shaping engine (in our case DirectWrite)
has to resolve text into glyph indices anyways, so using them directly
for text rendering allows reduces the effort of turning it back into
text ranges and hashing those. It's memory overhead is also reduced,
because we can now break up long ligatures into their individual glyphs.
Especially on AMD APUs I found this approach to run much faster.
A list of issues I think are either obsolete (and could be closed)
or resolved with this PR in combination with #14255:
Closes#6864Closes#6974Closes#8993Closes#9940Closes#10128Closes#12537Closes#13064Closes#13527Closes#13662Closes#13700Closes#13989Closes#14022Closes#14057Closes#14094Closes#14098Closes#14117Closes#14533Closes#14877
## PR Checklist
* Enabling software rendering enables D2D mode ✅
* Both D2D and D3D:
* Background appears correctly ✅✅
* Text appears correctly
* Cascadia Code Regular ✅✅
* Cascadia Code Bold ✅✅
* Cascadia Code Italic ✅✅
* Cascadia Code block chars leave (almost) no gaps ✅✅
* Terminus TTF at 13.5pt leaves no gaps between block chars ✅✅
* ``"`u{e0b2}`u{e0b0}"`` in Fira Code Nerd Font forms a square ✅✅
* Cursor appears correctly
* Legacy small/medium/large ✅✅
* Vertical bar ✅✅
* Underscore ✅✅
* Empty box ✅✅
* Full box ✅✅
* Double underscore ✅✅
* Changing the cursor color works ✅✅
* Selection appears correctly ✅✅
* Scrolling in various manners always renders correctly ✅✅
* Changing the text antialising mode works ✅✅
* Semi-transparent backgrounds work ✅✅
* Scroll-zooming the font size works ✅✅
* Double-size characters work ✅✅
* Resizing while text is printing works ✅✅
* DWM `+Heatmap_ShowDirtyRegions` shows that only the cursor
region is dirty when it's blinking ✅✅
* D2D
* Margins are filled with background color ❌
They're filled with the neighboring's cell background color for
convenience, as D2D doesn't support `D3D11_TEXTURE_ADDRESS_BORDER`
* D3D
* Margins are filled with background color ✅
* Soft fonts work ✅
* Custom shaders enable continous redraw if time constant is used ✅
* Retro shader appears correctly ✅
* Resizing while a custom shader is running works ✅
Upgrading clang-format lead to a few changes in the formatting
of code inside macros. Apart from the upgrade, I've also spent
some time removing all options from .clang-format that are
redundant with `BasedOnStyle: Microsoft`.
`til::linear_flat_set` is a primitive hash map with linear probing.
The implementation is slightly complicated due to the use of templates.
I've strongly considered just writing multiple copies of this class,
by hand since the code is indeed fairly trivial but ended up deciding
against it, because this templated approach makes testing easier.
This class is in the order of 10x faster than `std::unordered_map`.
It can be costly, difficult, or often impossible to compare two
instances of a struct. This little helper can simplify this.
The underlying idea is that changes in state occur much less often than
the amount of data that's being processed in between. As such, this
helper assumes that _any_ modification to the struct it wraps is a
state change. When you compare the modified instance with another
the comparison operator will then always return false. This makes
state changes potentially more costly, because more state might be
invalidated than was necessary, but on the other hand it makes both,
the code simpler and the fast-path (no state change) much faster.
For instance, let's look at the amount of data that represents a
user's chosen font: It encompasses the font family, size and weight,
font axes (a vector of tuples), dpi and cell height/width overrides.
Comparing all that data, every time the user changes anything, is
fairly complex to code and maintain and costly at runtime, even though
the user will change the only font very seldomly. Instead, we can
optimize for the common case of no font changes occuring and simply
assume that if any font related field changed, all fields changed.
This is exactly what `til::generational` does.
Two PowerShell scripts were added so that developers new to the project
know if they have the wrong version of PowerShell installed.
When first building Terminal, it would continuously fail, and I didn't
really know why. I'm new to both this project and to open source, so
when I saw an error message about "pwsh.exe" not being found I was
confused and didn't know what went wrong. What I didn't know is that
Windows PowerShell and PowerShell Core had different names for
their .exe files, and since I had the latest version of Windows
PowerShell installed, I figured that I was completely set. So, once I
realized that Windows PowerShell (what I had installed) is
powershell.exe and PowerShell Core (what I needed to have installed) is
pwsh.exe, I downloaded PowerShell Core, and it built without issue. So,
in order to help other newbies, I made two scripts, `CheckPSVersion` and
`WindowsCheckPSVersion`, which make sure that PowerShell Core 7.0.0+ is
installed, outputting an error telling the developer to download Core
7.0.0+ if they have Windows PowerShell but not Core. These scripts are
run pre-build courtesy of `Microsoft.Terminal.Settings.ModelLib.vcxproj`
## Validation Steps Performed
Building with both Windows PowerShell and PowerShell core: builds
perfectly, no issues.
Building with Windows PowerShell but not PowerShell core: build fails,
but a nice error prints out that reminds the user to download the
correct version of PowerShell core.
Closes#14797
This adds PR adds a couple foundational functions and classes to make
our TextBuffer more performant and allow us to improve our Unicode
correctness in the future, by getting rid of our dependence on
`OutputCellIterator`. In the future we can then replace the simple
UTF-16 code point iterator with a proper grapheme cluster iterator.
While my focus is technically on Unicode correctness, the ~4x VT
throughput increase in OpenConsole is pretty nice too.
This PR adds:
* A new, simpler ROW iterator (unused in this PR)
* Cursor movement functions (`NavigateToPrevious`, `NavigateToNext`)
They're based on functions that align the cursor to the start/end
of the _current_ cell, so such functions can be added as well.
* `ReplaceText` to write a raw string of text with the possibility to
specify a right margin.
* `CopyRangeFrom` will allow us to make reflow much faster, as it's able
to bulk-copy already measured strings without re-measuring them.
Related to #8000
## Validation Steps Performed
* enwik8.txt, zhwik8.txt, emoji-test.txt, all work with proper
wide glyph reflow at the end of a row ✅
* This produces "a 咪" where only "a" has a white background:
```sh
printf '\e7こん\e8\x1b[107ma\x1b[m\n'
```
* This produces "abん":
```sh
stdbuf -o0 printf '\x1b7こん\x1b8a'; printf 'b\n'
```
* This produces "xy" at the end of the line:
```sh
stdbuf -o0 printf '\e[999C\bこ\bx'; printf 'y\n'
```
* This produces red whitespace followed by "こ " in the default
background color at the end of the line, and "ん" on the next line:
```sh
printf '\e[41m\e[K\e[m\e[999C\e[2Dこん\n'
```
New-TerminalStackedChangelog used to generate logs that looked like this:
```
* [3] A commit that was seen 3 times
* A commit that was only seen once
* [2] Some other commit
```
Now it will generate logs that look like this:
```
/ base..branch-1
|/ base..branch-2
||/ base..branch-3
* [XXX] A commit that was seen 3 times
* [ X ] A commit that was only seen once
* [XX ] Some other commit
```
This format is more expressive, as it indicates _which branches_ contain which commits.
As a reminder, my release note writing style starts with a stacked changelog. It's how I tell (1) which commits are in the new preview release only, (2) which commits are in the new preview and the new stable release and (3) which commits were already released in a previous stable release.
Changes from 1 get included in the new changelog, changes from 2 get included in both and changes from 3 get deleted because they have already been released.
`s/it's/its/`
Note that I didn't touch the several errors in the doc and doc/spec directories, since those seem to be dated and signed email excerpts, and I don't want to violate authorial integrity. Let me know if you would like me to fix those as well.
## References
p 57. Murray, L. (1824). English grammar. Philadelphia : E. T. Scott.
I skimmed several hundred usages of the word "it's" in the code. This actually wasn't as tiresome as it sounds, since many of the code comments in this repo are entertaining and educational — the adjectives do not _necessarily_ apply in that order, but do _possibly_ apply in that order.
My long-term plan is to replace the `CodepointWidth` enum with a simple integer
return value that indicates the amount of columns a codepoint is wide.
This is necessary so that we can return 0 for ZWJs (zero width joiners).
This initial commit represents a cleanup effort around `CodepointWidthDetector`.
Since less code runs faster, this change has the nice side-effect of running
roughly 5-10% faster across the board. It also drops the binary size by ~1.2kB.
## Validation Steps Performed
* `CodepointWidthDetectorTests` passes ✅
* U+26bf (``"`u{26bf}"`` inside pwsh) is a wide glyph
in OpenConsole and narrow one in Windows Terminal ✅
This is a follow-up of #13025 to make the members of `til::point/size/rect`
uniform and consistent without the use of `unions`. The only file that has
any changes is `src/host/getset.cpp` where an if condition was simplified.
## Validation Steps Performed
* Host unit tests ✅
* Host feature tests ✅
* ControlCore feature tests ✅
This replaces ~70k LOC (parts of boost, 1/4th of the code in this project)
with ~700 LOC (`small_vector.h`). By replacing boost, we simplify future
maintenance and improve compile times.
## Validation Steps Performed
* New and existing unit tests are ok ✅
* Various common VT applications run fine in debug mode OpenConsole ✅
While working on another PR related to this I noticed that my VS
generates `.vcxproj` files that are a bit different to the ones we have.
This commit is a quick search & replace of all our project files to make
(primarily) their `ToolsVersion` more in line with what VS does itself:
No `ToolsVersion` for `.vcxproj`, `ToolsVersion="15.0"`
for `.csproj` and `ToolsVersion="4.0"` for `.filters` files.
I was messing around with trying to build & deploy from the commandline. I discovered this, which is progress. However, the inner-loop commandline build for the Terminal is still egregiously long.
* just a docs update
* is EIM work
```
% .\tools\ReleaseEngineering\ServicingPipeline.ps1
Inferred servicing version 1.14
PICK f025c53dbab37a5a55ac23a51aba03e36467315f: Remove the fallback to wsl.exe when HKCU\...\Lxss doesn't exist (#13436)
OK
```
Previously this project used a great variety of types to present text buffer
coordinates: `short`, `unsigned short`, `int`, `unsigned int`, `size_t`,
`ptrdiff_t`, `COORD`/`SMALL_RECT` (aka `short`), and more.
This massive commit migrates almost all use of those types over to the
centralized types `til::point`/`size`/`rect`/`inclusive_rect` and their
underlying type `til::CoordType` (aka `int32_t`).
Due to the size of the changeset and statistics I expect it to contain bugs.
The biggest risk I see is that some code potentially, maybe implicitly, expected
arithmetic to be mod 2^16 and that this code now allows it to be mod 2^32.
Any narrowing into `short` later on would then throw exceptions.
## PR Checklist
* [x] Closes#4015
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
Casual usage of OpenConsole and Windows Terminal. ✅
This commit fixes some formatting bugs by upgrading clang-format and ensures
that our code is again formatted the same way Visual Studio 2022 would do it.
This script takes pull requests from a project board, cherry-picks them,
and updates the project board. It also yells at you if there are
conflicts to resolve, and generally tries to keep track of everything.
It is quite cool.
These changes are purely a refactoring of the build files. There should
be no difference to the compiled result or runtime behavior.
Currently there are packages.config files in lots of directories, with
those same projects referencing props/targets from packages/ with a
version string in the path. This is frustrating because version changes
or new dependencies require updating lots and lots of build files
identically. There is also the possibility of error where locations are
missed.
With these changes there is a single canonical nuget configuration that
takes effect for all of OpenConsole.sln. Updating version numbers
should be limited to a single set of global files.
The changes were done incrementally but the result is basically that
dep\nuget\packages.config serves as the global NuGet dependency list. A
pair of common build files (common.nugetversions.props and
common.nugetversions.targets) were added to contain the various imports
and error checks. There is also a special build target to ensure that
the restore happens before builds even though a given directory doesn't
have a packages.config for Visual Studio to observe.
These new *.nugetversions.* files are imported in pretty much every
vcxproj/csproj in the solution in the appropriate place to satisfy the
need for packages. There are opt-in configuration values (e.g.
`TerminalCppWinrt=true`) that must be set to opt into a given
dependency. Adding a new dependency is just a matter of adding a new
opt-in value. The ordering of include does matter, which was a
difficult challenge to realize and address.
There was also a preexisting issue in 3 test projects where
cppwinrt.props was included but not cppwinrt.targets. By consolidating
things globally that "error" was fixed, but broke the build in a way
that was very confusing. Those projects don't need the cppwinrt targets
so they were opted out of the cppwinrt build files entirely to fix the
breaks and get back to previous behavior.
There are two notable exceptions to this canonical versioning. The
first is that there are dueling XAML 2.7 dependencies. I avoided that
by leaving those as per-project package.config entries. The second is
that any projects outside of the .sln (such as the Island samples) were
not touched.
## Validation Steps Performed
The primary validation is that the solution builds without errors. That
is what I'm seeing (x64|Debug). I also ran `git clean -fdx` from the
root of the repo to wipe it to clean and then opened the solution and
was able to build successfully. The project F5 deploys and looks fine
to me with just a cursory glance. The tests also largely pass (7418
pass, 188 fail, 14 other) which is as good or better than the baseline I
established from a clean clone.
Closes#12708
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fix typos found by codespell. Some of it in documentation and user-visible text, mostly in code comments. While I understand you might not be interested in fixing code comments, one of the reasons being extra noise in git history, kindly note that most spell checking tools do not discriminate between documentation and code comments. So it's easier to fix everything for long maintenance.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Closes #xxx
* [X] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [x] Tests added/passed
* [X] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: [#501](https://github.com/MicrosoftDocs/terminal/pull/501)
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
I have checked and re-checked all changes.
This commit makes the following changes to `til::point/size/rectangle`
for the following reasons:
* Rename `rectangle` into `rect`
This will make the naming consistent with a later `small_rect` struct
as well as the existing Win32 POINT/SIZE/RECT structs.
* Standardizes til wrappers on `int32_t` instead of `ptrdiff_t`
Provides a consistent behavior between x86 and x64, preventing accidental
errors on x86, as it's less rigorously tested than x64. Additionally it
improves interop with MIDL3 which only supports fixed width integer types.
* Standardizes til wrappers on throwing `gsl::narrow_error`
Makes the behavior of our code more consistent.
* Makes all eligible functions `constexpr`
Because why not.
* Removes implicit constructors and conversion operators
This is a complex and controversial topic. My reasons are: You can't Ctrl+F
for an implicit conversion. This breaks most non-IDE engines, like the one on
GitHub or those we have internally at MS. This is important for me as these
implicit conversion operators aren't cost free. Narrowing integers itself,
as well as the boundary checks that need to be done have a certain,
fixed overhead each time. Additionally the lack of noexcept prevents
many advanced compiler optimizations. Removing their use entirely
drops conhost's code segment size by around ~6.5%.
## References
Preliminary work for #4015.
## PR Checklist
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
I'm mostly relying on our unit tests here. Both OpenConsole and WT appear to work fine.
To unify with WinUI, we're going to share an engineering component of this particular NuGet package full of scripts and utilities to make PGOing things easier.
This basically removes all of the scripts that I ~blatantly stole~ copied from https://github.com/microsoft/microsoft-ui-xaml and moves to the NuGet package that the team generates instead. A bunch of build things had to be massaged to make it work in our pipeline.
If msbuild is already on the path, we don't need to look for it.
Also,
> I know what I did. I installed VS 2022, which is a prerelease VS install. `tools\razzle` prefers the stable builds. I think I'm gonna remove that.
* [x] Closes#1313
* [x] Closes#11446
I've done this process enough times that I should have written a script
to do it a while ago. This one is rough, but the whole changelog process
is pretty rough.
This script takes multiple revision ranges and produces something that
looks like a rough untranslated changelog, with indicators for how many
of the provided ranges had the same change (deduplicated by title.)
I use a process like this to build the Stable and Preview release notes
out of a set of revision ranges.
## Summary of the Pull Request
Fixes the 24 failing generated tests. 20 of them were fixed by enforcing the following rule: when moving backwards by word...
- a degenerate range moves to the beginning of the word, then to the word behind it.
- a non-degenerate range outright moves to the word behind it.
The fix was simple: if we're a degenerate range, check if we're at the beginning of the word. If not, move there. Otherwise, move to the word before it. See UiaTextRangeBase.cpp changes for implementation details.
Along the way, several misauthored tests were found:
- 2 generated tests:
- Cause: MS Word considers a line break a word delimiter. We don't use line-wrapping to distinguish two separate words.
- `MovementAtExclusiveEnd` backwards word movement tests:
- `end` will always be `writeTarget` because...
- [degenerate range case] both `start` and `end` are moved to the beginning of the word (`writeTarget`)
- [non-degenerate range case] from the `UiaTextRangeBase` bugfix, we should be moving to the word behind it.
- this misauthored test was explicitly found by fixing the bug first explained here.
## References
#10925 Word navigation testing
This commit reduces the code surface that interacts with raw JSON data,
reducing code complexity and improving maintainability.
Files that needed to be changed drastically were additionally
cleaned up to remove any code cruft that has accrued over time.
In order to facility this the following changes were made:
* Move JSON handling from `CascadiaSettings` into `SettingsLoader`
This allows us to use STL containers for data model instances.
For instance profiles are now added to a hashmap for O(1) lookup.
* JSON parsing within `SettingsLoader` doesn't differentiate between user,
inbox and fragment JSON data, reducing code complexity and size.
It also centralizes common concerns, like profile deduplication and
ensuring that all profiles are assigned a GUID.
* Direct JSON modification, like the insertion of dynamic profiles into
settings.json were removed. This vastly reduces code complexity,
but unfortunately removes support for comments in JSON on first start.
* `ColorScheme`s cannot be layered. As such its `LayerJson` API was replaced
with `FromJson`, allowing us to remove JSON-based color scheme validation.
* `Profile`s used to test their wish to layer using `ShouldBeLayered`, which
was replaced with a GUID-based hashmap lookup on previously parsed profiles.
Further changes were made as improvements upon the previous changes:
* Compact the JSON files embedded binary, saving 28kB
* Prevent double-initialization of the color table in `ColorScheme`
* Making `til::color` getters `constexpr`, allow better optimizations
The result is a reduction of:
* 48kB binary size for the Settings.Model.dll
* 5-10% startup duration
* 26% code for the `CascadiaSettings` class
* 1% overall code in this project
Furthermore this results in the following breaking changes:
* The long deprecated "globals" settings object will not be detected and no
warning will be created during load.
* The initial creation of a new settings.json will not produce helpful comments.
Both cases are caused by the removal of manual JSON handling and the
move to representing the settings file with model objects instead
## PR Checklist
* [x] Closes#5276
* [x] Closes#7421
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* Out-of-box-experience is identical to before ✔️
(Except for the settings.json file lacking comments.)
* Existing user settings load correctly ✔️
* New WSL instances are added to user settings ✔️
* New fragments are added to user settings ✔️
* All profiles are assigned GUIDs ✔️
## Summary of the Pull Request
Updates our `UiaTextRange` to no longer treat the end of the buffer as the "document end". Instead, we consider the "document end" to be the line beneath the cursor or last legible character (whichever is further down). In the event where the last legible character is on the last line of the buffer, we use the "end exclusive" position (left-most point on a line one past the end of the buffer).
When movement of any kind occurs, we clamp each endpoint to the document end. Since the document end is an actual spot in the buffer (most of the time), this should improve stability because we shouldn't be pointing out-of-bounds anymore.
The biggest benefit is that this significantly improves the performance of word navigation because screen readers no longer have to take into account the whitespace following the end of the prompt.
Word navigation tests were added to the `TestTableWriter` (see #10886). 24 of the 85 tests were failing, however, they don't seem to interact with the document end, so I've marked them as skip and will fix them in a follow-up. This PR is large enough as-is, so I'm hoping I can take time in the follow-up to clean some things on the side (aka `preventBoundary` and `allowBottomExclusive` being used interchangeably).
## References
#7000 - Epic
Closes#6986Closes#10925
## Validation Steps Performed
- [X] Tests pass
- [X] @codeofdusk has been personally testing this build (and others)
Jerry
Michael Xu
Leonard Hecker
Dustin L. Howett
PankajBhojwani
Mike Griese
Sam Meyer
grammar-police
David Machaj
Dimitri Papadopoulos Orfanos
Michael Niksa
Carlos Zamora