In the full-rd transform size search, we go through all transform
sizes to choose the one with best rd score. In this patch, an
early termination is added to stop the search once we see that the
smaller size won't give better rd score than the larger size. Also,
the search starts from largest transform size, then goes down to
smallest size.
A speed feature tx_size_search_breakout is added, which is turned off
at speed 0, and on for other speeds. The transform size search is
turned on at speed 1.
Borg test results:
1. At speed 1,
derf set: psnr gain: 0.618%, ssim gain: 0.377%;
stdhd set: psnr gain: 0.594%, ssim gain: 0.162%;
No noticeable speed change.
3. At speed 2,
derf set: psnr loss: 0.157%, ssim loss: 0.175%;
stdhd set: psnr loss: 0.090%, ssim loss: 0.101%;
speed gain: ~4%.
Change-Id: I22535cd2017b5e54f2a62bb6a38231aea4268b3f
This commit enables the encoder to record the location of the
center frame to generate alter reference frame. It then allows to
skip checking prediction modes of other reference frame types when
it comes to encode this frame.
The speed 3 runtime is reduced for the test sequences:
bus at CIF 1000 kbps, 9791 ms -> 9446 ms, i.e., 3.5% speed-up,
pedestrian at 1080p 2000 kbps, 184043 ms -> 175730 ms, i.e., 4.5%
speed-up.
No compression performance change observed.
Change-Id: Iacfde3bcc1445964e7a241f239bd6ea11cb94bd1
1. Clean the code for encode frame tests
2. Add encode w/ and w/o alt reference frame test
3. Add encode SNR layers test
4. Add encode multiple layers but decode partial layers test
Change-Id: Ibd2c9bc02525db584a6f931a98405f2d851b3cd6
This reverts commit 5509b7fd8f
Observed a big drop in compression quality and speed for speed 1 for a 360p test clip, revert this now for investigation.
Change-Id: If69dc8d77a225b34dc7907a9472e1a7a0a22762d
Add a speed feature to give the tighter partition search
range. Before partition search, calculate the histogram
of the partition sizes of the left, above and previous
co-located blocks of the current block. If the variance of
observed partition sizes is small enough, adjust the search
range around the mean partition size, which will be tigher.
The feature is currently turned on at speed 2. Experiments on
sample youtube clips show on average the runtime is reduced
by 3-7%.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 509251 ms -> 491953 ms (3.3%)
pedestrian_area_1080p @ 2000kbps: 223941 ms -> 214226 ms (4.3%)
The PSNR performance is changed:
derf: -0.112%
yt: -0.099%
hd: -0.090%
stdhd:-0.102%
Change-Id: Ie205ec5325bf92ec5676c243e30ba9d0adca10f2
In the current implementation of the encoder,
frame buffers may come from the wider set of
12 such buffers, and is not restricted to the
8 allowed as reference frames. This is only
an implementation detail and does not affect
the constraint of having a total of 8 reference
buffers overall.
Change-Id: I075f777146c2df49c275d89232933f8127235175
At --good and speed 3 or above for resolution less than 720p. This
disables the tests for 64x64 intra prediction modes. Encoding time
reduction is about 1%.
Change-Id: Ib396e3d1417fece416e3f0fee929b128acbb130f
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
In the encoder, current_video_frame is used in a couple of places to
decide encoding strategy, this commit replaces with more appropriate
variables.
Change-Id: I3d3d8d8e2ea02c489e4639b9d4c446a63e357d29
This commit moves the simplified coefficient probability model
and costing update to speed 4, and turns on chessboard pattern
mode search for sub 720p sequences. The overall coding performance
of speed 3 is improved:
derf 0.889%
stdhd 1.744%
The speed 3 runtime for test sequences are improved:
bus cif at 1000 kbps 9823 ms -> 9642 ms
pedestrian 1080p 2000 kbps 189559 ms -> 183284 ms
Change-Id: Iecbc7496a68f31fd49fb09f8dfd97c028d675a5d
This commit enables the encoder to skip NEARMV and ZEROMV if the
above and left blocks have identical reference frame, and the
current reference is different from that. It reduces the runtime
of speed 3 for test sequences:
bus cif at 1000 kbps 10064 ms -> 9823 ms
pedestrian 1080p at 2000 kbps 193078 ms -> 189559 ms
The compression performance is changed by
derf -0.085%
stdhd -0.103%
Change-Id: If304f26d42e6412152a84c3dd7b02635c38444f4
This commit allows the encoder to check the above and left neighbor
blocks' reference frames and motion vectors. If they are all
consistent, skip checking the NEARMV and ZEROMV modes. This is
enabled in speed 3. The coding performance is improved:
pedestrian area 1080p at 2000 kbps,
from 74773 b/f, 41.101 dB, 198064 ms
to 74795 b/f, 41.099 dB, 193078 ms
park joy 1080p at 15000 kbps,
from 290727 b/f, 30.640 dB, 609113 ms
to 290558 b/f, 30.630 dB, 592815 ms
Overall compression performance of speed 3 is changed
derf -0.171%
stdhd -0.168%
Change-Id: I8d47dd543a5f90d7a1c583f74035b926b6704b95
The function is called only once, right after all stats counters are
reset to 0. Therefore all the computations have zero effect on return
values. This commmit to removed those effectless code.
Change-Id: I50d27c0802547921fa36c60aa4bd92d76247f595
'ref_frame_map' is initialized to -1. avoids using an invalid index if
VP9_GET_REFERENCE/VP8_COPY_REFERENCE controls are issued after a decode
error.
Change-Id: I4599762c4d0b07a5943a72bf4a86ccb596cc062a
if the decode of the first frame fails, frame_to_show may not be set.
fixes a crash in vpxdec with corrupt data.
Change-Id: I5ab9476d005778a13fd42a39d05876bb6c90a93c
At speed 6 the smallest partitioning was 16x16 and biggest
intra block was 8x8, essentially disallowing all intra blocks
which produces ugly artifacts when revealing new video.
Change-Id: I364042d4c64e09be0666ade64aac94d0a1b586cf
This commit enables encoder to select fast forward transform and
quantization path according to the prediction residual sse/variance,
in the rate-distortion optimization scheme.
Change-Id: Ief9fc3844fd4107166d401970e800c6e5ce2b5fe
We had a very complicated way to initialize cpi->pass from
cfg->g_pass:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->mode = ONE_PASS_GOOD;
break;
case VPX_RC_FIRST_PASS:
oxcf->mode = TWO_PASS_FIRST;
break;
case VPX_RC_LAST_PASS:
oxcf->mode = TWO_PASS_SECOND_BEST;
break;
}
cpi->pass = get_pass(oxcf->mode).
Now pass is moved to VP9EncoderConfig and initialization is simple:
switch (cfg->g_pass) {
case VPX_RC_ONE_PASS:
oxcf->pass = 0;
break;
case VPX_RC_FIRST_PASS:
oxcf->pass = 1;
break;
case VPX_RC_LAST_PASS:
oxcf->pass = 2;
break;
}
Change-Id: I8f582203a4575f5e39b071598484a8ad2b72e0d9
Eliminated instructions by using better neon instructions
and rearranging the loop.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.0%.
Change-Id: I6b1700e79318f647ea67ef25e954c308932950ec
Replaced encoder and decoder functions to get a pointer
to a reference frame with a common function, vp9_get_ref_frame,
and simplified it.
Change-Id: Icb206fcce8caace3bfd1db3dbfa318dde79043ee
in the sub_pixel_*variance* function the dst is aligned to 16 bytes and not
to 32 bytes - now load unaligned data
Change-Id: I2e0b9745543697efc56fefa32857ea10117af135
Fix the interaction between active map and reuse_inter_pred_sby. The
reuse_inter_pred_sby feature expects inter predictors to already be
built, but blocks with active map on skip this step.
Change-Id: Ibb2bf0d228f678935d82a0ede9cb0919ab7c8878
A bug in Microsoft compiler was found in the function
vp9_filter_block1d16_v8_avx2 and a workaround applied.
the bug occur when there was 4 consecutive maddubs + min + adds
intrinsic instructions.
Change-Id: I83499faeb70971e650e5663fd2490360ddb1a51b
in the function sad32x32x4d and sad64x64x4d the source is aligned to 16 bytes
and not to 32 bytes - the load is now unaligned.
Change-Id: I922fdba56d0936b5cf72e4503519f185645a168c
Specifies the bit-depth, color sampling and colorspace
for intra only frames for profiles > 0
Also adds checks to ensure that profile 1 and 3 are
exclusively used for non 420 streams.
Change-Id: Icfb15fa1acccbce8f757c78fa8a2f60591360745
This commit adds a configure time option used to enable strict error
checking in decoder to make sure intermediate stage cofficients of
inverse transforms are within valid range of signed 16 bit integer.
For valid VP9 input streams, intermediate stage coefficients should
always stay within the range of a signed 16 bit integer. Coefficients
can go out of this range for invalid/corrupt VP9 streams. However,
strictly checking this range for every intermediate coefficient can
be a burden for decoder, therefore such validation is only enabled
with configure option --enable-coefficient-range-checking.
Change-Id: I47d47c8c4e48a922c3d223ca59064f51b3f0f5ed
This commit integrates the fast transform and quantization process
into skip_recode scheme in the rate-distortion optimization loop.
Previously the fast transform and quantization process was only
enabled for non-RD coding flow.
Change-Id: Ib7db4d39b7033f1495c75897271f769799198ba8
When no more data is available, vpx_codec_decode should
be called with NULL as data and 0 as data_sz.
vpx_codec_get_frame iterates over a list of the frames
available for display. The iterator storage should be initialized
to NULL to start the iteration. Iteration is complete when this
function returns NULL.
Also change the unit test to conform to the api spec.
Change-Id: I4b258b309f5df3d37d10c82f01492c0394181c2a
vp9_rb_bytes_written -> vp9_wb_bytes_written
+ move limits.h from the header to the source file where it's needed
Change-Id: Ifcdc856b4d4dcc2fff555ef11f86c86a0d83dab3
This patch allows the encoder to directly split the block
in partition search, therefore skip searching NONE. It
computes a score which measures whether 16x16 motion vectors
from the first pass in the current block are consistent with
each others. If they are inconsistent and we have enough Q
to encode, split the block directly, and skip searching NONE.
This feature is under flag CONFIG_FP_MB_STATS. In speed 2,
it further gives a speedup of 3-8% on sample yt clips as
compared to the previous version under the same flag. Overall,
the features under the flag will give 7-15% on typical yt
clips at up to 6000kbps data rate. The speedup at very high
data rate is not significant.
For hard stdhd clips:
park_joy_1080p @ 15000kbps: 504541ms -> 506293ms (-0.35%)
pedestrian_area_1080p @ 2000kbps: 326610ms -> 290090ms (+11.2%)
The compression performance using the features under the flag:
derf: -0.068%
yt: -0.189%
hd: -0.318%
stdhd:-0.183%
To use the feature, set CONFIG_FP_MB_STATS and turn on
cpi->use_fp_mb_stats.
Change-Id: Iad58a2966515c8861aa9eb211565b1864048d47f
This code was being called from two places and
difficult to parse. I rationalized it in to a
function to improve readability.
Change-Id: I154b8fe0b84e6c01e69601e78e67bd47c954d8b6
Re-organize the one-byte structure for 16x16 first pass
block. Add bits to indicate motion vector directions.
Change-Id: Id10754ba343dfc712c7fed5bcc85c67fa0bbcb89
vp9_variance8x8(), and vp9_get8x8var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~1.2%.
Change-Id: I8a66ac2a0f550b407caa27816833bdc563395102
This patch allows the encoder to skip the search for partition
SPLIT, HORZ, VERT after the search for partition NONE is done
in RD optimization. It uses the first pass block-wise statistics
to make the decision. If all 16x16 blocks in the current partition
have zero motions and small residues from the frist pass statistics,
and it has small difference variance, further partition search is
skipped.
For speed 2 setting, experiments on general youtube clips show that
the speedup varies from 1% - 10%, 5% on average. On the performance
side in PSNR, derf 0.004%, yt -0.059%, hd -0.106%, stdhd 0.032%.
For hard stdhd clips:
park_joy_1080p, 502952 ms -> 503307 ms (-0.07%)
pedestrian_area_1080p, 227049 ms -> 220531 ms (+3%)
This feature is under the compilation flag CONFIG_FP_MB_STATS and
it is off in current setting.
Change-Id: I554537e9242178263b65ebe14a04f9c221b58bae
Remove the variable that indicates the relative block index. This
is explicitly covered by the use of pc_tree.
Change-Id: Ib13142582fff926c85e375bde656aa050add8350
This commit enables a chessboard pattern constrained partition
search for 720p and above resolutions. The scheme applies stricter
partition search to alternative blocks based on its above/left
neighboring blocks' partition range, as well as that of the
collocated blocks in the previous frame. It is currently turned
on at 16x16 block size level. The chessboard pattern is flipped
per coding frame.
The speed 3 runtime is reduced:
park_joy_1080p, 652832 ms -> 607738 ms (7% speed-up)
pedestrian_area_1080p, 215998 ms -> 200589 ms (8% speed-up)
The compression performance is changed:
hd -0.223%
stdhd -0.295%
Change-Id: I2d4d123ae89f7171562f618febb4d81789575b19
vp9_variance16x16(), and vp9_get16x16var().
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~16.7%.
Change-Id: Ib163aa99f56e680194aabe00dacdd7f0899a4ecb
currently the only way to know if multiple alt-refs are enabled is to
inspect the encoder instance.
this reduces the size of the allocation by 75% when not using multiple
alt-refs
Change-Id: Ie4baa240c2897e64b766c6ad229674884b5a65b6
This commit replace the repetitive retrieve of max and min allowed
partition from speed_feature with local variables max_size and
min_size.
Change-Id: Ib06f11f16615e4876e4dd5fb6a968c6bf5f7b216
The get_chessboard_index() used to call the entire VP9_COMMON
struct pointer to retrieve the chessboard pattern index. This cl
makes it call the frame index directly.
Change-Id: I3cad9d209ea2e77a358085a04fe1ff0ddec5ba03
Remove the redundant index computation when store the first
pass block-wise statistics. Currently, a single byte is
allocated for a 16x16 blocks, and all the frame statistics
saved during the first pass will be kept in memory for use
in the second pass. For a 1920x1080 300-frame clip, it will
take about 2.3 MB memory. This feature is off in current
setting.
Change-Id: I135a95b348ec093d54c6a07e1e8237626909e3bd
Remove all the redundant dct functions (dct4x4, dct8x8)
in avx2 except dct32x32 those functions were copied originally from dct_sse2
Change-Id: I742576fbf5175f3ac09f2076976a9247b259323e
The issue was introduced by commit g9f37d14 with adding explicit
restrictions on reference-frame scale factors. The restriction
is checked against aligned-by-8 frame dimensions, not against
original ones. So, for example, frame of 35×35 actually can refer
to frame of 70×70, but the new check won't allow this. It will
compare 35 vs 72 (not 70), so 2x downscale limit will be exceeded.
Change-Id: Ic663693034440f64ac8312cbff9e1e773a921060
The partition search for 4x4 blocks takes unnecessary steps to
reconstruct pixels and an extra partition type update. This commit
removes such operations. No visible compression/speed difference.
Thanks to Yue (yuec@) for finding this issue.
Change-Id: I3f83824aa3fd3717d63be0b280fa57258939a70a
This commit turns on the existing vp9_get_prob function using
64 bit in the intermediate step. It fixes the ioc issue for 4K
above frame sizes (issue 828).
Change-Id: I9f627f3beca2c522f73b38fd2a3e7eefdff01a7c
The assignment of the variable mode_excluded in
vp9_rd_pick_inter_mode_sub8x8 takes redundant conditional jump.
This commit removes it.
Change-Id: Ie195fbe6e54ec2ade7093d562c456a2e93143704
A previous change, https://gerrit.chromium.org/gerrit/#/c/70632,
introduced a size validation for reference frames to insuare the
input stream is a valid VP9 stream. However, the logic requiring
all reference frames have valid size turned out to be too strict.
In this commit, we modify the validation to require one of the
reference frame has valid dimension. In addition, the decoder
reports error whenever it detects the use of reference frame
with invalid scalig ratio.
Change-Id: If8efc312244087556cfe00f1fcbdff811268ebad
The patch:
https://gerrit.chromium.org/gerrit/#/c/70814/
changed the test that determined whether the context
frame buffers needed to be reallocated or not.
The code checked for a change in total frame area
to signal the need to reallocate context buffers.
However, the above_context buffer needs to be
resized i:xf only the width of the frame has increased.
Change-Id: Ib89d75651af252908144cf662578d84f16cf30e6
Jim Bankoski
Yunqing Wang
Jingning Han
Dmitry Kovalev
Minghai Shang
Yaowu Xu
Pengchong Jin
Adrian Grange
James Zern
levytamar82
Adam Xu
Paul Wilkins
Alex Converse
Scott LaVarnway
Adrian Grange
Deb Mukherjee
Hangyu Kuang
Johann
Frank Galligan