This commit moves the primitive multi-threading files from vp9
folder to vpx_thread, which will be accessible by all vpx codec.
Change-Id: Ib51e66e9c69801c10631fab56d35a0c0aaed5883
to MB_MODE_INFO_EXT. This saves 36 bytes per 8x8 area for
both the decoder and encoder. (encoder has two MODE_INFO
buffers)
Change-Id: If006abb2224acaf326df3c2be09e77e967662107
the declaration containing the alignment in vp9_filter.h was removed in:
eb88b17 Make vp9 subpixel match vp8
fixes a crash in 32-bit builds
Change-Id: I9a97e6b4e8e94698e43ff79d0d8bb85043b73c61
Added check to see if last frame was all intra. This will
eliminate two checks in find_mv_refs_idx(). Also, do not
update the frame mvs if the current frame is all intra.
This improved performance on material with frequent
intra-only frames.
Change-Id: I44a4042c3670ab0d38439d565062a0e2a1ba9d1e
This control allows the application to skip the loop filter in the
decoder. This is an advanced control that should only be used in
extreme circumstances as it may introduce and accumulate decode
artifacts.
Change-Id: I278c65c60826f84c9141ebe06c6eeed3c2335fa8
calculate the averages needed for even and odd rows once; this removes a
conditional from the inner loop
the final average calculated currently relies on above[] being extended,
it could be reduced to use
above[block_size - 2] + 3 * above[block_size - 1]
Change-Id: I70f5eac8d8a2a959c7114844a95826f445c3dd4d
The only difference between the two was that the vp9 function allowed
for every step in the bilinear filter (16 steps) while vp8 only allowed
for half of those. Since all the call sites in vp9 (<< 1) the input, it
only ever used the same steps as vp8.
This will allow moving the subpel variance to vpx_dsp with the rest of
the variance functions.
Change-Id: I6fa2509350a2dc610c46b3e15bde98a15a084b75
Updated sources according to improved version of common MSA macros.
Enabled respective convolve MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: If5ad6ef8ea7ca47feed6d2fc9f34f0f0e8b6694d
Updated sources according to improved version of common MSA macros.
Enabled idct MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: I1f488ab2c741f6c622b7a855388a202168082209
only the immediate above right pixel is needed; this removes a
conditional from the inner loop
the final average calculated currently relies on above[] being extended,
it could be reduced to use above[block_size - 2] + 3 * above_right
Change-Id: Ica4f2b8d25eec3ca1d6fa52ef0d4adc228eeea3f
Done little restructuring/styling changes to the sources like generic macro definitions, their use to reduce code lines, better code alignments etc.
Disabled all MSA hooks and tests
Change-Id: Ic6f2dce0b501f46b80c06c46c0fe2043d557b190
In VS 2015 and higher snprintf is supplied and therefore vsnprintf
doesn't need to be defined. This also avoids problems caused by
_snprintf being different from snprintf.
This fixes a build break with VS 2015 and improves security.
Originally submitted via chromium by brucedawson@chromium.orghttps://codereview.chromium.org/1055603003
Additionally break this MSVC-specific tweak to a new file, which will
become the home of all such MSVC-specific things.
This requires adding a dependency on msvc.h to every example which uses
args.c and tools_common.h
Change-Id: I35b5f8e7ea00f6627403aabc9ea79b0412557a99
+ synchronize filter function signatures
this makes any intrinsics filters available for inlining and has the
side-effect of making those filters static, quieting missing-prototype
warnings.
Change-Id: I1908875caffa585bd4fc65aaf10d17a5e20cfb46
+ synchronize filter function signatures
this makes any intrinsics filters available for inlining and has the
side-effect of making those filters static, quieting missing-prototype
warnings.
Change-Id: I1cd55c9d52547793ad65aa90c7620f0e426edaa2
collect the vp9_convolve function definition macros there; this will
allow some relocation of functions from vp9_asm_stubs.c
Change-Id: Idadd117fa256dd48748379856973fd985b8204e8
reorder includes to avoid:
warning C4985: 'ceil': attributes not present on previous declaration.
this is the same workaround used in vp9/common/vp9_systemdependent.h
Change-Id: Ia10dd63de24f96fa1507a6179220e9d6ec774db6
Various header/test files had to be re-worked in order to
build "Remove cm parameter from vp9_decode_block_tokens()".
This patch reverts the "Remove cm" part and only contains
the re-worked header files.
Change-Id: I520958a88d1991fee988a3c784d0eac40e117a32
1. Check existing buffer sizes when re-allocate context buffers.
2. Don't need to set mi buffers to 0 during setup_mi.
Change-Id: I6b48b0e077a4d804312b605ad0dc34aec5795a6d
With the sad functions, and hopefully the variance functions soon,
moving to the vpx_dsp location, place the defines used in the
reference C code in a common location.
Change-Id: I4c8ce7778eb38a0a3ee674d2f1c488eda01cfeca
currently this needs to be 2x (NEED_ABOVERIGHT) the size of the largest
block (32) + 1 (for above_left). reduce the buffer size from 128 + 16
(alignment) to 64 + 16.
Change-Id: Idaca1806c7e1214e9437de24e15edc2ebf18f95d
The warning only happens in VP9 encoder's first pass due to src_mi
is not set up yet. But it will not fail the encoder as left_mi and
above_mi are not used in the first_pass and they will be set up again
in the second pass.
Change-Id: I0713b4660d71e229e196654cb0970ba6b1574f28
this macro was used inconsistently and only differs in behavior from
DECLARE_ALIGNED when an alignment attribute is unavailable. this macro
is used with calls to assembly, while generic c-code doesn't rely on it,
so in a c-only build without an alignment attribute the code will
function as expected.
Change-Id: Ie9d06d4028c0de17c63b3a27e6c1b0491cc4ea79
Create a new component, vpx_dsp, for code that can be shared
between codecs. Move the SAD code into the component.
This reduces the size of vpxenc/dec by 36k on x86_64 builds.
Change-Id: I73f837ddaecac6b350bf757af0cfe19c4ab9327a
widen the loads and stores to 128-bit.
this was added, but not enabled in:
493a857 Add some sse2 code for intra prediction.
Change-Id: I277d7db608a7db7d75cc0bde86f48fa66ad487e4
offsetting by a variable stride prevents instruction reordering,
resulting in poor assembly.
additionally reroll 16x16/32x32 loops to reduce register spill with this
new format
Change-Id: I0635b8ba21ecdb88116e927dbdab53acdf256e11
The rotation computation using 2X of cos(pi/16) has a potential to
overflow 32 bit, this commit disable the function to allow further
investigation and optimization.
Change-Id: I4a9803bc71303d459cb1ec5bbd7c4aaf8968e5cf
The version is currently producing different result from c version
for some input. Disable the use of it for now to allow time for
investigation the source of mismatch.
Change-Id: Id039455494ee531db4886a9f1fa4761174ef6df3
(see I3a05cf1610679fed26e0b2eadd315a9ae91afdd6)
For the test clip used, the decoder performance improved by ~2%.
This is also an intermediate step towards adding back the
mode_info streams.
Change-Id: Idddc4a3f46e4180fbebddc156c4bbf177d5c2e0d
Force split on 16x16 block (to 8x8) based on the minmax over the 8x8 sub-blocks.
Also increase variance threshold for 32x32, and add exit condiiton in choose_partition
(with very safe threshold) based on sad used to select reference frame.
Some visual improvement near moving boundaries.
Average gain in psnr/ssim: ~0.6%, some clips go up ~1 or 2%.
Encoding time increase (due to more 8x8 blocks) from ~1-4%, depending on clip.
Change-Id: I4759bb181251ac41517cd45e326ce2997dadb577
This commit separates Hadamard transform/quantization operations
from rate and distortion computation in block_yrd. This allows one
to skip SATD computation when all transform blocks are quantized
to zero. It also uses a new block error function that skips
repeated computation of sum of squared residuals. It reduces the
CPU cycles spent on block error calculation in block_yrd by 40%.
Change-Id: I726acb2454b44af1c3bd95385abecac209959b10
sse4 isn't set by configure or used in rtcd, correct the sad entries to
use sse4_1 without changing the signatures for now.
this was done in vp8 post-vp9 branch.
Change-Id: Ia9f1fff9f2476fdfa53ed022778dd2f708caa271
This commit replaces the 16x16 2D-DCT transform with Hadamard
transform for RTC coding mode. It reduces the CPU cycles cost
on 16x16 transform by 5X. Overall it makes the speed -6 encoding
speed 1.5% faster without compromise on compression performance.
Change-Id: If6c993831dc4c678d841edc804ff395ed37f2a1b
This commit uses Hadamard transform based rate-distortion cost
estimate for rtc coding mode decision. It improves the compression
performance of speed -6 for many hard clips at lower bit-rates.
For example, 5.5% for jimredvga, 6.7% for mmmoving, 6.1% for
niklas720p. This will introduce extra encoding cycle costs at
this point.
Change-Id: Iaf70634fa2417a705ee29f2456175b981db3d375
Tx_totals counters weren't handled correctly in multi-thread
case, which caused the mismatch while encoding using threads > 1.
This patch fixed that.
Change-Id: Ice9b0386f57175fb92a0bdcd5042686a3106246a
Visual Studio is exceptionally picky about this:
vp9_reconintra.c(900): warning C4113: 'void (__cdecl *)()' differs in
parameter lists from 'void (__cdecl *)(void)'
[.build-x86_64-win64-vs10\vpx.vcxproj]
Change-Id: I564c7415f4608fd962be8c699d6133a996b545f7
Frame buffers are now allocated dynamically on-demand.
Entries in the reference frame map, cm->ref_frame_map,
may now be set to -1 (INVALID_IDX) to indicate that
there is not a valid reference buffer in that "slot".
All slots in the reference frame map are now initialized
to the empty state (-1) and each buffer is initialized
to have a reference count of 0.
Change-Id: Id1afe98de98db4ae8b2dfefed7889c3b28c68582
This patch fixed webm issue 962.
(https://code.google.com/p/webm/issues/detail?id=962)
The data races occurred when an encoder and a decoder were created
at the same time, and the function pointers were initialized twice.
Change-Id: I8851b753c4b4ad4767d6eea781b61f0ac9abb44b
This commit replaces the SAD with variance as metric for the
integral projection vector match. It improves the search accuracy
in the presence of slight light change. The average speed -6
compression performance for rtc set is improved by 1.7%. No speed
changes are observed for the test clips.
Change-Id: I71c1d27e42de2aa429fb3564e6549bba1c7d6d4d
The intrinsic statement _mm_subs_epi16() should take immediate.
Feeding variable as its input argument will cause compile failure
in older version gcc.
Change-Id: I6a71efcc8d3b16b84715e0a9bcfa818494eea3f4
This commit introduces a new block match motion estimation
using integral projection measurement. The 2-D block and the nearby
region is projected onto the horizontal and vertical 1-D vectors,
respectively. It then runs vector match, instead of block match,
over the two separate 1-D vectors to locate the motion compensated
reference block.
This process is run per 64x64 block to align the reference before
choosing partitioning in speed 6. The overall CPU cycle cost due
to this additional 64x64 block match (SSE2 version) takes around 2%
at low bit-rate rtc speed 6. When strong motion activities exist in
the video sequence, it substantially improves the partition
selection accuracy, thereby achieving better compression performance
and lower CPU cycles.
The experiments were tested in RTC speed -6 setting:
cloud 1080p 500 kbps
17006 b/f, 37.086 dB, 5386 ms ->
16669 b/f, 37.970 dB, 5085 ms (>0.9dB gain and 6% faster)
pedestrian_area 1080p 500 kbps
53537 b/f, 36.771 dB, 18706 ms ->
51897 b/f, 36.792 dB, 18585 ms (4% bit-rate savings)
blue_sky 1080p 500 kbps
70214 b/f, 33.600 dB, 13979 ms ->
53885 b/f, 33.645 dB, 10878 ms (30% bit-rate savings, 25% faster)
jimred 400 kbps
13380 b/f, 36.014 dB, 5723 ms ->
13377 b/f, 36.087 dB, 5831 ms (2% bit-rate savings, 2% slower)
Change-Id: Iffdb6ea5b16b77016bfa3dd3904d284168ae649c
using this to control reallocation would miss a change if the function
were not called for every frame.
fixes potential memory corruption by the subsequent memset
Change-Id: I4c6bb6ab68803104fc824c7e27cc2f9b2cf53e33
MODE_INFO struct was modified, and vp9_print_modes_and_motion_vectors()
didn't work anymore. This patch modified vp9_debugmodes.c so that
this function works again for debug usage.
Change-Id: I293fae0295235deb2529a460a274caf7c045ac1a
This will fix the frame parallel decode hang on windows
due to not enough semaphores.
This will also make the frame parallel decode safer as
the number of frame buffers could only support maximum
8 threads.
Change-Id: Id9ef50692819dcbebbd74a0aabffbfb3f39a4309
This commit allows the encoder to account for additional chroma
plane costs in the mode decision process, if the current block
potentially contains significant color change. It improves the
visual quality at very low bit-rates.
The compression performance of dark720p is improved by 12.39% in
speed 6. For jimred at 150 kbps, the PSNR of V component (red)
increased by 0.2 dB, at the expense of about 5% increase in
encoding time. Note that for sequences where the chroma components
are fairly consistent, the encoding time increase is negligible.
On average the rtc set compression performance is improved by
1.172% in PSNR and 1.920% in SSIM.
Change-Id: Ia55b24ef23a25304f7ec9958fbf07fd6e658505c
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
+ nearest for consistency
near is a reserved word in windows builds so using it as a parameter
name may cause build failures with some configurations
Change-Id: Iddf1d4ecdb39843f14e95dbfd9dca55f07f81403
1. move the check of search method of USE_TX_8X8 up one level to
avoid operations of build_tree_distributions()
2. count tx used and avoid computaton for coef udpate when one size
is not used at all.
Change-Id: Ia3e54a2588aa531c41377a1bfaa64385d04a592c
Jingning Han
Johann
James Zern
Scott LaVarnway
Parag Salasakar
Frank Galligan
Johann Koenig
hkuang
Minghai Shang
Yaowu Xu
Yunqing Wang
Marco Paniconi
hui su
jackychen
Alex Converse
Adrian Grange
Jim Bankoski