Currently third_party/zlib/zlib.gyp uses the system libz if:
os_posix == 1 and OS != "mac" and OS != "ios" and OS != "openbsd"
I'm assuming that Android sets os_posix==1 and therefore this change is
a no-op. But it consolidates control of this variable in a single
location.
BUG=none
https://chromiumcodereview.appspot.com/10837100/
git-svn-id: http://src.chromium.org/svn/trunk/src/build@150355 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
These gyp defines are set unconditionally in envsetup, which means they
are not in fact part of the "environment" but just the defaults for the
Android build. Move them into common.gypi instead to make this clear.
Several of them were already the correct setting and can simply be
removed.
The makefiles generated by gyp are identical before and after this
change.
Review URL: https://chromiumcodereview.appspot.com/10825131
git-svn-id: http://src.chromium.org/svn/trunk/src/build@149609 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
This broke the WebKit Mac bot, as the directory it works in is different there
compared to the Chromium configuration. Determine the source's root through the
DEPTH define, and then walk up in the build/mac/ directory.
BUG=
TEST=WebKit Mac builder doesn't break after a Chromium DEPS roll.
Review URL: https://chromiumcodereview.appspot.com/10824105
git-svn-id: http://src.chromium.org/svn/trunk/src/build@149181 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
Having to manually set mac_sdk was a FAQ when Xcode 4 was released. Now
we're using the 10.6 SDK by default, but Xcode 4.4 ships only with the
10.7 and 10.8 SDKs, so it'll likely become a FAQ again. Automatically
set mac_sdk to something sensible.
(People who explicitly say "mac_sdk=10.6" will have to stop doing so
when they switch to Xcode 4.4.)
BUG=121162
TEST=Build without mac_sdk in GYP_DEFINES. Something useful happens
with Xcode 3.2.6, Xcode 4, Xcode 4.4.
Review URL: https://chromiumcodereview.appspot.com/10824055
git-svn-id: http://src.chromium.org/svn/trunk/src/build@148817 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
Now requires you to specifically change the GYP_GENERATORS to specify Ninja. The original change broke because gyp ran for both make and ninja and the webkit bot determines whether to use ninja by the presence of build.ninja (thanks to Peter for figuring this out)
BUG=137569,136693
Review URL: https://chromiumcodereview.appspot.com/10827073
git-svn-id: http://src.chromium.org/svn/trunk/src/build@148790 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
This is useful for cases where Xcode doesn't know about the SDK, possibly
because the SDK is installed outside of Xcode altogether. For example, Xcode
4.4 does not include a copy of the 10.6 SDK, so if you have a copy of the 10.6
SDK present at /SDKs/MacOSX10.6.sdk, you can put this in ~/.gyp/include.gypi:
{
'variables': {
'mac_sdk_path': '/SDKs/MacOSX10.6.sdk',
},
}
Review URL: https://chromiumcodereview.appspot.com/10831039
git-svn-id: http://src.chromium.org/svn/trunk/src/build@148680 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
Includes:
1) Allowing overridding of android_ndk_sysroot (addition of "%" in
variable name).
2) Disable NOTIMPLEMENTED output for official builds (see base/logging.h)
3) Add clang build configurations
4) Remove unnecessary cflags from regular build.
5) Include crtbegin_so.o and crtend_so.so for _type=="loadable_module"
which is needed for ppapi_tests.
BUG=137569
Review URL: https://chromiumcodereview.appspot.com/10808042
git-svn-id: http://src.chromium.org/svn/trunk/src/build@147986 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
The gyp settings for libjpeg currently have a number of problems ...
- Settings for using the system libjpeg are replicated in the gyp files for both libjpeg and libjpeg_turbo.
- The default setting for use_system_libjpeg is different depending on whether libjpeg or libjpeg_turbo is in use. This is unintuitive, as libjpeg_turbo is a drop-in replacement for libjpeg.
This patch improves the situation ...
- Improve documentation about the interaction between use_system_libjpeg and use_libjpeg_turbo.
- Use the libjpeg gyp file whenever use_system_libjpeg==1. This means that the settings for using the system libjpeg are only needed here. (A later patch will remove them from libjpeg_turbo's gyp file). It also means that the libjpeg_turbo repository can be excluded when use_system_libjpeg==1.
- Move all settings concerned with use_system_libjpeg to the libjpeg gyp file.
Note that with this change, we lose the OS-specific defaults for use_system_libjpeg when use_libjpeg_turbo==0. These defaults are currently not used, as use_libjpeg_turbo==1 always.
Review URL: https://chromiumcodereview.appspot.com/10696082
git-svn-id: http://src.chromium.org/svn/trunk/src/build@147254 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
- Use of the system zlib is already the default, but set it explicitly here in
case the default changes.
- Use of the system ICU was fixed in r145879, so we now make use of it.
Also remove static_link_system_icu, which is not used.
Review URL: https://chromiumcodereview.appspot.com/10777006
git-svn-id: http://src.chromium.org/svn/trunk/src/build@146565 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
The initial iOS version was over-ambitious, and doesn't yet build. To
get the build working, this:
- only builds base:base on iOS, not base:*, and
- disables warnings-as-errors in third-party code for iOS, since
at least NSS and ICU have warnings for iOS.
This also adds nss.gyp to the iOS build, now that its gyp support
has landed
BUG=None
TEST=None
Review URL: https://chromiumcodereview.appspot.com/10704153
git-svn-id: http://src.chromium.org/svn/trunk/src/build@146120 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
This enables DCHECK, NOTREACHED, and other debugging code on Android
non-official release builds. Since all Android builds are done in
release mode, we don't set NDEBUG according to whether the build is in
release or debug mode. Rather we set NDEBUG for official builds only.
This requires a change to skia.gyp to define SK_RELEASE exactly the
same when building skia and its direct dependencies:
SK_RELEASE should be defined in skia.gyp only when use_system_skia is
set to 1 because system skia is always in release mode. When building
with chromium version of skia (which is what we do now) this should
not be defined and left to the skia headers to figure out whether to
include debug code or not (they define SK_RELEASE only if NDEBUG was
defined).
BUG=http://b/6712716
Review URL: https://chromiumcodereview.appspot.com/10695047
git-svn-id: http://src.chromium.org/svn/trunk/src/build@145789 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
For the directx it probes in src\third_party\directxsdk if you have the dxsdk there and
for the regular sdk it probems in src\third_party\platformsdk_win8
If it does not find them it takes an educated guess.
The gyp variables windows_sdk_path and directx_sdk_path can be overriden from the environment if
the defaults are wrong.
BUG=none
TEST=chrome builds
Review URL: https://chromiumcodereview.appspot.com/10690072
git-svn-id: http://src.chromium.org/svn/trunk/src/build@145619 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
Moves targets that will likely never exist for iOS to a !ios condition block. For the rest of the targets, moves all dependencies to a !ios condition block, with the plan being to move many of them back to the main dependencies section as they come online.
While this is arguably uglier than using a separate file in the short term, in the long term the targets will look essentially like this just with many of the dependencies moved back where they were, so this is a clearer step toward the final state.
Note that this target won't actually build yet; this is just enough that 'gclient runhooks' will succeed.
BUG=None
TEST=None (an FYI bot building all.gyp:All will follow later)
Review URL: https://chromiumcodereview.appspot.com/10695060
git-svn-id: http://src.chromium.org/svn/trunk/src/build@145205 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
First clang roll in a few weeks, so lots of new stuff:
* better 'unused' warnings. Now catches e.g. "AutoLock(&lock);"
* better 'uninitialized' warnings
* template type eliding in diagnostics
* TLS attribute support
* New -Wunused-private-field warning (disabled for now)
* style plugin has better warning for implicit destructors
* method_iterator interface changed back to what it was, update plugin again
* Warn on member variable self assignments
BUG=135207
TEST=none
Review URL: https://chromiumcodereview.appspot.com/10689041
git-svn-id: http://src.chromium.org/svn/trunk/src/build@145022 4ff67af0-8c30-449e-8e8b-ad334ec8d88c
There are basically three categories of changes here:
1) Most OS==mac becomes OS==mac or OS==ios
2) Some Xcode-related settings move into OS==mac blocks since Xcode is no longer Mac-only
3) Addition of iOS-specific settings (SDK, compile flags, etc)
BUG=None
TEST=None
Review URL: https://chromiumcodereview.appspot.com/10704039
git-svn-id: http://src.chromium.org/svn/trunk/src/build@145008 4ff67af0-8c30-449e-8e8b-ad334ec8d88c