The ceiling was introduced in bug 549190 for improve the consistency of
underline positioning. However, removing ceiling now doesn't seem to
regress the testcases in that bug, probably thanks to improvement in
other part.
The ceiling here causes us to have different font metrics than other
browsers on Windows, and can lead to webcompat issue. We also don't do
this for other backends. So it's probably better removing it in favor
of rounding.
There are several test changes:
* min-intrinsic-with-percents-across-elements.html changes result due to
height of wrapping div in reference page depends on line height, so a
fixed line height is set to work around the issue.
* 368020-1.html changes result because a slightly different line-height
triggers bug 1462514. It is changed to use fixed line-height to work
around the issue.
* 456147.xul is disabled because it compares XUL against HTML page, but
XUL has different approach to position text in its elements than HTML.
Specifically, XUL elements don't seem to respect line height while
HTML elements do. The original line height in the file was probably
chosen to make the HTML match XUL, so it seems to be non-trivial to
fix it in a platform-independent way.
* sizing-orthog-{vlr,vrl}-in-htb-{008,020}.xht fails due to text in <p>
after the testing block shifts 1px up for unknown reason.
MozReview-Commit-ID: 2WJG1AigWl1
--HG--
extra : rebase_source : 540e68ffff618a6dc3c14b3702b2c042988061a3
The ceiling was introduced in bug 549190 for improve the consistency of
underline positioning. However, removing ceiling now doesn't seem to
regress the testcases in that bug, probably thanks to improvement in
other part.
The ceiling here causes us to have different font metrics than other
browsers on Windows, and can lead to webcompat issue. We also don't do
this for other backends. So it's probably better removing it in favor
of rounding.
There are several test changes:
* min-intrinsic-with-percents-across-elements.html changes result due to
height of wrapping div in reference page depends on line height, so a
fixed line height is set to work around the issue.
* 368020-1.html changes result because a slightly different line-height
triggers bug 1462514. It is changed to use fixed line-height to work
around the issue.
* 456147.xul is disabled because it compares XUL against HTML page, but
XUL has different approach to position text in its elements than HTML.
Specifically, XUL elements don't seem to respect line height while
HTML elements do. The original line height in the file was probably
chosen to make the HTML match XUL, so it seems to be non-trivial to
fix it in a platform-independent way.
* sizing-orthog-{vlr,vrl}-in-htb-{008,020}.xht fails due to text in <p>
after the testing block shifts 1px up for unknown reason.
MozReview-Commit-ID: 2WJG1AigWl1
--HG--
extra : rebase_source : 6c61fa95a3b01e7b439be46a2498b4f893d8b84b
This is to accommodate non-networking fd usage (IPC transports, various
databases, .xpi files, etc.), so it's separate from Necko's existing
manipulation of the fd limit, which is tied into Necko's internal limits
on how many sockets it will try to poll at once.
Note that resource limits are inherited by child processes, so this needs
to be done only in the parent.
This patch also removes similar code used on Solaris and Mac OS X. The
Mac case (bug 1036682) refers to fd use by graphics textures, which
shouldn't be consuming fds anymore (even transiently) as of bug 1161166.
MozReview-Commit-ID: 2uodrkW5sUn
--HG--
extra : rebase_source : 5306f4995000459b89bed048ecafba3c262bbbdf
Read more information from the printing device to setup the unwritable region.
Translate the printing context's coordinate system so that the point (0,0)
refers to the top-left of the physical paper instead of the top-left of the
printable region.
MozReview-Commit-ID: 9ei2FgEUDyO
--HG--
extra : rebase_source : c2e2715f47499538035101a285152eca2aba3202
This ensures that only people with qualified hardware can flip prefs to
enable WebRender on beta and release. Nightly users will still be able
enable WebRender on unqualified hardware.
MozReview-Commit-ID: E5sgzZhuX4p
--HG--
extra : rebase_source : a4e85e71e4d85b5d9f1e17c1413ca9690349f75a
All animated images on a page are currently registered with the refresh
driver and advance with the tick refresh. These animations may not even
be in view, and if they are large and thus cause redecoding, cause a
marked increase in CPU usage for no benefit to the user.
This patch adds an additional flag, mCompositedFrameRequested, to the
AnimationState used by FrameAnimator. It is set to true each time the
current animated image frame is requested via
FrameAnimator::GetCompositedFrame. It is set to false each time the
frame is advanced in FrameAnimator::AdvanceFrame (via
FrameAnimator::RequestRefresh). If it is true when
FrameAnimator::RequestRefresh is called, then it will advance the
animation according to the normal rules. If it is false, then it will
set the current animation time to the current time instead of advancing.
This should not cause the animation to fall behind anymore or skip
frames more than it does today. This is because if
FrameAnimator::GetCompositedFrame is not called, then the internal state
of the animation is advancing ahead of what the user sees. Once it is
called, the new frame is far ahead of the previously displayed frame.
The only difference now is that we will display the previous frame for
slightly longer until the next refresh tick.
Note that if an animated image is layerized (should not happen today) or
otherwise uses an ImageContainer, this optimization fails. While we know
whether or not we have an image container, we do not know if anything is
actively using it.
The original code was added in bug 385263 for fixing bug 279032 that a
single font provides zero for max ascent / descent in its HHEA table
which caused Firefox to crash.
Unconditionally picking the maximum of max ascent / descent and their
em correspondents doesn't seem to be essential for working around that
case, so this patch changes it to just use the em ascent / descent when
both max ascent and descent are zero.
This fixes a webcompat problem related to Roboto font on Linux (and
presumably also Android given it uses FreeType backend as well).
MozReview-Commit-ID: EpKrfiOwnZt
--HG--
extra : rebase_source : 0619abf992fb1e1a1f3068ab172880913ebff1f1
On windows it's possible for us to fallback from D2D to Skia rendering at any time due to a device reset.
If this happens with `enable-tiles-if-skia-pomtp` enabled we could begin to use tiling. This can cause a
crash if we never created the worker threads because at initialization time we weren't using tiling.
Another way to fix this would be to dynamically create the worker threads in UpdateRenderMode if we
have switched to skia. That's a larger change and more might be required, so I'd rather just fix the
crash for now.
This commit also fixes a pref that should be `Once` instead of `Live`.
MozReview-Commit-ID: JQidXPjI7ER
--HG--
extra : amend_source : ba9a3746faea3a7355251b7e97e3f7c5dc1ba06b
This rearranges how synthetic-bold use is determined in the font selection
& rendering code. Previously, we would decide during the font-selection
algorithm whether we need to apply synthetic-bold to the chosen face, and
then pass that decision through the fontgroup (storing it in the FamilyFace
entries of the mFonts array there) down to the actual rendering code that
instantiates fonts from the faces (font entries) we've selected.
That became a problem for variation fonts because in the case of a user
font, we may not have downloaded the resource yet, so we just have a "user
font container" entry, which carries the descriptors from the @font-face
rule and will fetch the actual resource when needed. But in the case of a
@font-face rule without a weight descriptor, we don't actually know at
font-selection time whether the face will support "true" bold (via a
variation axis) or not, so we can't reliably make the right decision about
applying synthetic bold.
So we now defer that decision until we actually instantiate a platform font
object to shape/measure/draw text. At that point, we have the requested
style and we also have the real font resource, so we can easily determine
whether fake-bold is required.
(This patch should not result in any visible behavior change; that will
come in a second patch now that the architecture supports it.)
There's a circular dependency between `UsesTiling` and `InitOMTPConfig` because
we try to disable OMTP if we will be using tiling and edge padding is enabled.
Now that edge padding is disabled everywhere except android it should be safe
to assume that if edge padding is enabled then we'll be using tiling as well
and should disable OMTP.
This commit also removes a check on `UsesTiling` from CalculateWorkerCount
as it is redundant.
MozReview-Commit-ID: 1ruWPwXfLwO
--HG--
extra : rebase_source : d489c52c728d2ff356d2413b9b1044dfa3f63135
This moves all the tiling prefs into one spot and organizes them a bit. It also fixes a common issue
with `edge-padding` being enabled on windows because it wouldn't be defined in all.js and defaulting
to enabled. Note that `worker-threads` is switched to `-1` by default here instead of just for OSX.
This should have no affect because we don't actually create the threads unless we are tiling, which
only happens right now on OSX.
MozReview-Commit-ID: D8HOs3yv7w0
--HG--
extra : rebase_source : 9b5d2d228af743ea4facd076dfa2f370ea93ebc8
The clipping code uses gfxContext::GetClipExtents which calls gfxContext::GetDeviceOffset
and DrawTarget::GetSize. The former was previously not being intialized, while the latter
was explicitly unimplemented. This patch fixes both of those facts.
Otherwise, enabling this functionality has been made trivial by several upstream patches
in webrender (the most recent being glenn's work on unifying shadows which eliminated
the buggy text-shadow shader code that was blocking this).
MozReview-Commit-ID: B1AlG3o4XQS
--HG--
extra : rebase_source : 2043c9c781f507c5d02041420145b1a5c59c0bb2
These prefs are on by default now, and so there's no point in keeping them as
override prefs.
MozReview-Commit-ID: Gzs65oS9koD
--HG--
extra : rebase_source : 89d52f7992a0e87f60673f3b7bd6efad627fd040
This patch converts all the prefs in MediaPrefs to the new StaticPrefs system.
Note that the "media.wmf.skip-blacklist" pref was present in both MediaPrefs
and gfxPrefs. The copy in MediaPrefs was never used; this explains why this
patch does not add an entry for it to StaticPrefList.h.
Note also that the patch removes themedia.rust.mp4parser pref, because it's
unused.
MozReview-Commit-ID: IfHP37NbIjY
--HG--
extra : rebase_source : df84ea813b7c366d7be663c696891325610149c8
It can happen often where we reuse the front buffer for a long paint, and then
the next frame we see that it is still locked, and need to allocate a new buffer
from the texture pool. If this happens we don't need to repaint the new buffer
because the old buffer is still around, but we do need to copy it over and
upload it to texture sources. It seems better to just hold onto the back buffer
and let it accumulate more invalid regions.
MozReview-Commit-ID: 2DQjwAX7ZmM
--HG--
extra : rebase_source : 3077952d3ef56deea6af68492f71bb114d96d84a
Until all the pieces are in place, turning on this pref will probably
break horribly. But we need the pref so we can add the rest of the
pieces without enabling them by default.
MozReview-Commit-ID: 7DkcwZgXwhx
--HG--
extra : rebase_source : e1fdef2e9a682028df524f51f767a4d2187410b1
This reworks bug 1440561 so that we only precompute loads that belong to our
user font set, avoiding messing up with fonts in the cache that belong to other
pages.
The loadability of a font is precomputed in PreTraverse in the same way as we
did, but only for the fonts that we may end up loading. This is stored in
FontFaceSet now.
Also, the principal shenanigans that this code did are reworked to be explicit
about when the document principal changes in ResetToURI, instead of having a
member around and a mutable variable. This makes the code easier to follow.
MozReview-Commit-ID: 9ofTbaLDUF7
NullPrincipal::Create() (will null OA) may cause an OriginAttributes bypass.
We change Create() so OriginAttributes is no longer optional, and rename
Create() with no arguments to make it more explicit about what the caller is doing.
MozReview-Commit-ID: 7DQGlgh1tgJ
- gfxVRExternal Enables other processes to present
real or simulated VR hardware to Firefox.
- This functionality is disabled by default, under
dom.vr.external.enabled.
- VRDisplayInfo, VRControllerInfo, and associated
structs have been restructured to ensure internal
state is not exposed via shmem interface.
- Some refactoring to convert structs to
POD types, enabling them to be located
in shmem and be memcpy'd.
- Work needed before unpreffing marked
with "TODO" comments.
MozReview-Commit-ID: FbsusbxuoQ8
--HG--
extra : rebase_source : 8a448169c3f47411c705a4d9fd462a1f9363dfd9
extra : amend_source : e6702549527292e2850d16e8f503f0be9848159f
In each case, the atom had an obvious name and a weird name. Where possible, I
kept the obvious name and commented out the weird name, viz:
- `mixed` over `_mixed` for "mixed"
- `el` over `el_` for "el"
- `other` over `other_` for "other"
- `remote` over `Remote` for "remote"
But for several of them I didn't do that, because the weird name is used
within the HTML5 parser -- which is a huge pain to modify because it involves
code generated by code from another repo -- so I kept the weird name and
commented out the obvious name, viz:
- `list_` over `list` for "list"
- `svgSwitch` over `_switch` for "switch"
- `set_` over `set` for "set"
MozReview-Commit-ID: Jp3CpdWXNDm
--HG--
extra : rebase_source : 421ce5316772f1951488307e81f2ceee696d363d
This code was originally added to debug the frame visibility code.
However it wasn't architected correctly and makes the compositor use an
untrusted layers id from content. Instead of fixing this I'd rather just
delete it, since it's a big pile of code that is basically a debugging
tool that nobody owns anymore.
MozReview-Commit-ID: nPZqVeYsFp
This fixes PrintTargetWindows::BeginPrinting to detect when the
user cancels and have it return NS_ERROR_ABORT in that case.
The rest of the changes are simply making sure that the various
call points up the call stack don't print a warning message if
NS_ERROR_ABORT is returned up from
PrintTargetWindows::BeginPrinting.
MozReview-Commit-ID: 6xZ5SPje6TT
image.animated.decode-on-demand.threshold-kb is the maximum size in kB
that the aggregate frames of an animation can use before it starts to
discard already displayed frames, and redecode them as necessary. The
lower it is set to, the less overall memory we will consume at the
expense of execution time for as long as the tab with the animation(s)
above the threshold are kept open.
image.animated.decode-on-demand.batch-size is the minimum number of
frames we want to have buffered ahead of an animation's currently
displayed frame. The decoding will request this number of frames at a
time to maximize use of memory caching. Note that this is related to the
above preference as well; increasing the batch size will in effect raise
what the minimum threshold. This simplifies the logic in patches later
in the series.
Now that what we use to decide whether a document is styled by Servo are only
prefs and the doc principal, we don't need to inherit the style backend type,
since unless the pref has changed, the result will be the same.
MozReview-Commit-ID: KBmeBn1cRne
This avoids a redundant alloc and copy in `PutBuffer`. All existing callers
were destroying the passed in buffer after the call.
--HG--
extra : rebase_source : 065505219d70d26bad49c7eba2cec8edf0e9939d
extra : amend_source : 118eddad4dc901da02817c788fb98f6f4c85a3f0
extra : source : 7f0cedfb4bd85bfe1a523168019864c9c6c0e665
image.mem.volatile.min_threshold_kb is the minimum buffer allocation for
an image frame in KB before it will use volatile memory. If it is less
than it will use the heap. This only is set to > 0 on Android.
image.mem.animated.use_heap forces image frames to use the heap if it is
for an animated image. This is only enabled for Android, and was
previously a compile time option also for Android.
Move the initialization of SharedSurfacesParent from the compositor
thread creation to mirror the other WebRender-specific components, such
as the render thread creation. Now it will only be created if WebRender
is in use. Also prevent shared surfaces from being used by the image
frame allocator, even if image.mem.shared is set -- there is no purpose
in allowing this at present. It was causing startup crashes for users
who requested image.mem.shared and/or WebRender via gfx.webrender.all
but did not actually get WebRender at all. Surfaces would get allocated
in the shared memory, try to register themselves with the WR render
thread, and then crash since that thread was never created.
The image decoding thread pool can grow to be quite large, up to 32
threads, depending on the number of processors on the system. If the
user is not actively browsing, these threads are occupying resources
which could be reused elsewhere. After the timeout period, it will
release up to half of the threads in the pool.
Move the initialization of SharedSurfacesParent from the compositor
thread creation to mirror the other WebRender-specific components, such
as the render thread creation. Now it will only be created if WebRender
is in use. Also prevent shared surfaces from being used by the image
frame allocator, even if image.mem.shared is set -- there is no purpose
in allowing this at present. It was causing startup crashes for users
who requested image.mem.shared and/or WebRender via gfx.webrender.all
but did not actually get WebRender at all. Surfaces would get allocated
in the shared memory, try to register themselves with the WR render
thread, and then crash since that thread was never created.
The image decoding thread pool can grow to be quite large, up to 32
threads, depending on the number of processors on the system. If the
user is not actively browsing, these threads are occupying resources
which could be reused elsewhere. After the timeout period, it will
release up to half of the threads in the pool.
The change to RootAccessible.cpp fixes an obvious bug introduced in bug 741707.
The visibility changes in gfx/thebes are because NS_DECL_ISUPPORTS has a
trailing "public:" that those classes were relying on to have public
constructors.
MozReview-Commit-ID: IeB8KIJCGhU
There's only one caller so let's just eliminate inline FillAzure into
Fill.
MozReview-Commit-ID: JYpAQMkhEcS
--HG--
extra : rebase_source : 962b046405949d435537a77baea50f631a8aee72
CompositorBridgeChild may be lost at any time due to a GPU process
crash. Additionally it may be already destroyed due to shutdown being
initiated. For FlushAsyncPaints, we can safely ignore the missing child
because the subsequent operations will generally fail and we will
recover when the GPU process is respawned (or switched to the UI
process).
Bump mingw version to get the newest commit and do not include the
un-needed dw-extras.h on MinGW (thanks Jacek!)
MozReview-Commit-ID: OjO93XHCxs
--HG--
extra : rebase_source : 933bbb385004988a23d1069c9cd3241b3a3b336e
This also changes the function to return a sequence (JS Array) instead of
an nsFontFaceList object, and converts nsFontFace/nsIDOMFontFace into a
Web IDL implemented object too.
MozReview-Commit-ID: 1iAW3DYe5kO
--HG--
rename : layout/inspector/nsFontFace.cpp => layout/inspector/InspectorFontFace.cpp
This commit adds a paint worker thread pool to PaintThread, and dispatches
tiled paints to it. The thread pool is only created if tiling is enabled,
and its size is set by 'layers.omtp.paint-workers' and defaults to 1. If
-1 is specified, it will be sized to 'max((cpu_cores * 3) / 4, 1)'.
The one tricky part of dispatching tiled paints to a thread pool is the
AsyncEndLayerTransaction message that must execute once all paints are
finished. Previously, this runnable would be queued after all the paints
had been queued, ensuring it would be run after they had all completed.
With a thread pool, there is no guarantee. Instead this commit, uses
a flag on CompositorBridgeChild to signify whether all of the paints
have been queued ('mOutstandingAsyncEndLayerTransaction'), and after
every tiled paint it is examined to see if that paint was the last
paint, and if it is to run AsyncEndLayerTransaction. In addition,
if the async paints complete before we even mark the end of the
layer transaction, we queue it like normal.
The profiler markers are also complicated by using a thread pool.
I don't know of a great way to keep them working as they are per
thread, so for now I've removed them. I may have been the only
one using them anyway.
MozReview-Commit-ID: 5LIJ9GWSfCn
--HG--
extra : rebase_source : 0c26806f337a1b4b1511945f9c72e787b426c5ba
Mechanism for restricting pinch zooming when gesture is a two
finger pan. If the pinch span is below a given threshold and the
scroll distance above a given threshold then the zoom level is
maintained to allow for smooth panning with two fingers.
MozReview-Commit-ID: 62Fv0WeplOo
--HG--
extra : rebase_source : 71d7da4c4b4cc3a5adde13ad1a7c1fbf49856c35
Returning a zero-sized viewport in the case there's no shell / pres context.
For now, no other change yet. After this we can start tweaking the ShadowRoot
Stylist setup, and even try to return computed styles without a document \o/.
MozReview-Commit-ID: 3cT2PKQISri
We call PDFiumParent::Close twice under certain conditions. Once in
PDFiumProcessParent::Delete, and once in PDFiumProcessParent's dtor. So we may
hit MOZ_ABORT which tell us that we are trying to close a closed channel.
This patch prevents hitting this abort by:
1. Only close the channel in PDFiumProcessParent::Delete, remove another call
in PDFiumProcessParent's dtor. (Please see the change in
PDFiumProcessParent.cpp).
2. Remove PDFiumParent::AbortConversion and relative code. We can just use
PDFiumParent::EndConversion instead. When calling PDFiumParent::Close, we
actually close the IPC channel *synchronously*, which means there is no need
to register a callback by PDFiumParent::AbortConversion to receive
actor-destroy callback.
MozReview-Commit-ID: 9i5j6t54J3h
--HG--
extra : rebase_source : 5f74ebc1ecc29e9983c30ca2dd63e0b49bd24a50
While aborting conversion, we need to make sure there is no coversion task
executing in the PDFium process before destroying it.
MozReview-Commit-ID: 3Iqhe8KmYv2
--HG--
extra : rebase_source : 70d9f0b2e2986499e3061823e0c29830aa81d232
extra : source : 753ed705666fd4c55da456fb80604e4552d6bd52
Before we introduce PrintTargetEMF, all PrintTargets finish page printing task
before the end of PrintTarget::EndPage(). Unlike others, a page printing
in PrintTargetEMF is done after receiving an async callback from the pdfium
process. So we have both async and sync page printing behavior now. This patch
is trying to make both of them work correctly while priting a content document.
MozReview-Commit-ID: 2PHJToFlvtu
--HG--
extra : rebase_source : 9d2d7cf7330a157a0e5c6a414c75de94ca3fb5a1
extra : source : f61eb00f83acf45511d8448922212dccb12b05aa
We integrate PrintTargetEMF with the PDFium process to convert PDF into EMF in
this patch.
MozReview-Commit-ID: 5F0setrL94n
--HG--
extra : rebase_source : 1e52adbbe7502ca081c7029a15e4b3f486beb284
extra : source : 28f1671230fa70125e6971c9a287cb0658b89496
A new subclass of PrintTarget.
1. It uses PrintTargetSkPDF to generate one PDF FileDescriptor for one page.
2. In a later patch, it then passes that FD to PDFium process for converting
a PDF page to EMF contents.
Implementation of integration with PDFium actor is added the subsequent patches.
MozReview-Commit-ID: EcuBJHRW8Wk
--HG--
extra : rebase_source : 838d798161e112952b5e148bbece730159cd49ca
We will create several new files in the following patches for IPC and a new
subprocess. Several already existed files will be shifted into new build units,
we will meet several compile errors because of it.
This patch fixes those compile error in advance.
MozReview-Commit-ID: 5hd0sNYfBu0
--HG--
extra : rebase_source : d4cca529623586188ffebffd858f53188d12bb50
- Add pref to enable the ovrInit_Invisible flag for Oculus sessions, enabled by default.
- Ensure that the Oculus library is unloaded every time it is uninitialized,
improving reliability of exiting and returning to WebVR.
MozReview-Commit-ID: 6VCugCJ2dUz
--HG--
extra : rebase_source : c6002bbaab650a86a31f62b63029f13ce2c8f614
While aborting conversion, we need to make sure there is no coversion task
executing in the PDFium process before destroying it.
MozReview-Commit-ID: 3Iqhe8KmYv2
--HG--
extra : rebase_source : c4597de6c13d35024090ec1e851ad1db5b790c7a
extra : source : 753ed705666fd4c55da456fb80604e4552d6bd52
Before we introduce PrintTargetEMF, all PrintTargets finish page printing task
before the end of PrintTarget::EndPage(). Unlike others, a page printing
in PrintTargetEMF is done after receiving an async callback from the pdfium
process. So we have both async and sync page printing behavior now. This patch
is trying to make both of them work correctly while priting a content document.
MozReview-Commit-ID: 2PHJToFlvtu
--HG--
extra : rebase_source : ee691497bd439c6505f1f92898a667a9e972fff3
extra : source : f61eb00f83acf45511d8448922212dccb12b05aa
We integrate PrintTargetEMF with the PDFium process to convert PDF into EMF in
this patch.
MozReview-Commit-ID: 5F0setrL94n
--HG--
extra : rebase_source : 3dfc6ce64f4cdc7d5d7e95d1f064d956af909a26
extra : source : 28f1671230fa70125e6971c9a287cb0658b89496
A new subclass of PrintTarget.
1. It uses PrintTargetSkPDF to generate one PDF FileDescriptor for one page.
2. In a later patch, it then passes that FD to PDFium process for converting
a PDF page to EMF contents.
Implementation of integration with PDFium actor is added the subsequent patches.
MozReview-Commit-ID: EcuBJHRW8Wk
--HG--
extra : rebase_source : 459089204c023282a699bfd87b4db5b1783db98d
We will create several new files in the following patches for IPC and a new
subprocess. Several already existed files will be shifted into new build units,
we will meet several compile errors because of it.
This patch fixes those compile error in advance.
MozReview-Commit-ID: 5hd0sNYfBu0
--HG--
extra : rebase_source : 0d85c823e4ead4f09175f2cc83df811b2b4081ec
While aborting conversion, we need to make sure there is no coversion task
executing in the PDFium process before destroying it.
MozReview-Commit-ID: 3Iqhe8KmYv2
--HG--
extra : rebase_source : b82fe3b7231d9c4a171d6a19cd22c0c7ff47b4bf
extra : source : 753ed705666fd4c55da456fb80604e4552d6bd52
Before we introduce PrintTargetEMF, all PrintTargets finish page printing task
before the end of PrintTarget::EndPage(). Unlike others, a page printing
in PrintTargetEMF is done after receiving an async callback from the pdfium
process. So we have both async and sync page printing behavior now. This patch
is trying to make both of them work correctly while priting a content document.
MozReview-Commit-ID: 2PHJToFlvtu
--HG--
extra : rebase_source : 3531dd6a100e9518d8cb9904326250a8318cdad2
extra : source : f61eb00f83acf45511d8448922212dccb12b05aa
We integrate PrintTargetEMF with the PDFium process to convert PDF into EMF in
this patch.
MozReview-Commit-ID: 5F0setrL94n
--HG--
extra : rebase_source : 576e077f804785da20923620d9c4e3041936e835
extra : source : 28f1671230fa70125e6971c9a287cb0658b89496
A new subclass of PrintTarget.
1. It uses PrintTargetSkPDF to generate one PDF FileDescriptor for one page.
2. In a later patch, it then passes that FD to PDFium process for converting
a PDF page to EMF contents.
Implementation of integration with PDFium actor is added the subsequent patches.
MozReview-Commit-ID: EcuBJHRW8Wk
--HG--
extra : rebase_source : f977e6863b9f2ee961648ddaf13f5e30a3659410
We will create several new files in the following patches for IPC and a new
subprocess. Several already existed files will be shifted into new build units,
we will meet several compile errors because of it.
This patch fixes those compile error in advance.
MozReview-Commit-ID: 5hd0sNYfBu0
--HG--
extra : rebase_source : b6b8b069f8f2167ef87266ba9c95e8fe53cca6f6
Xidorn Quan
Andreea Pavel
sotaro
Martin Stransky
Jonathan Kew
Ryan Hunt
Narcis Beleuzu
Jan-Ivar Bruaroey
Csoregi Natalia
Adrian Wielgosik
Jed Davis
Margareta Eliza Balazs
YUKI "Piro" Hiroshi
Brendan Dahl
Dorel Luca
Kartikaya Gupta
Andrew Osmond
Chris Peterson
Milan Sreckovic
Lee Salzman
Jonathan Watt
Botond Ballo
Emilio Cobos Álvarez
Ciure Andrei
Alexis Beingessner
Cosmin Sabou
Noemi Erli
Nicholas Nethercote
Markus Stange
Sebastian Hengst
Tristan Bourvon
Ted Campbell
smswessem
Gurzau Raul
Tom Ritter
Jeff Muizelaar
Nathan Froyd
Coroiu Cristina
arthur.iakab
Miko Mynttinen
shindli
Zibi Braniecki
Kearwood Gilbert
Robert Longson
Eric Rahm
Masatoshi Kimura
Boris Zbarsky
Andrea Marchesini
Bogdan Tara
Jim Chen
Gerald Squelart
Tiberius Oros
Jeremy Chen
Sylvestre Ledru
Cameron McCormack
Jeff Gilbert
jlogandavison
Jamie Nicol
Matt Woodrow
cku
Swapnil
Kearwood "Kip" Gilbert
Brindusan Cristian