When the queue only contains compositor events, a compositor event
should go to the back of the queue to maintain order.
--HG--
extra : commitid : I7bHvJCe68o
RestrictedProfiles: The name of the class can be confusing because it handles
guest profiles and restricted profiles. We might even query it from a normal
profile.
--HG--
rename : mobile/android/base/RestrictedProfiles.java => mobile/android/base/Restrictions.java
extra : commitid : BtjvH8aWSlk
extra : rebase_source : 262c9537d7e93658ceea6f94c8481a393ddd3072
In nsIWidget, GetBoundsUntyped(), GetClientBoundsUntyped() and
GetScreenBoundsUntyped() are currently the primary implementations, and the
untyped versions are defined on top of them. This patch flips that around.
--HG--
extra : rebase_source : 15b2f08f90bf4d1e209c6cb885f6a6e3b8db6708
There are few enough calls now that using WidgetToScreenOffset() +
ToUnknownPoint() is a better approach.
--HG--
extra : rebase_source : 18ec6677f6416b02069a646b6f45dcfaa4045671
The patch renames the existing functions (GetBounds(), GetClientBounds(), etc)
by adding an |Untyped| suffix. It then adds typed equivalents, and uses those
typed equivalents in all the call sites where it's easy to do so. The trickier
remaining call sites are converted to use the Untyped-suffix version.
--HG--
extra : rebase_source : 6bfb15bfc4698e2eba7d4db55497299d3dffcd51
Also use direct assignment for some LayoutDeviceIntPoint assignments, rather
than doing it field-by-field.
--HG--
extra : rebase_source : cff1ec8f1ed3ab1924a07d2227044f646019f0cf
Currently, GeckoEditable periodically fires update composition events to
update the Gecko composition styling. To make the code more efficient
and more robust in dealing with content JS code, this patch merges these
events into events like replacing text, setting span, and removing span.
As a result, a setComposingText call now results in one replacing text
event instead of a replacing text event plus an update composition event.
Currently, the Gecko-side selection tries to mirror the Java-side
selection, but this is difficult because the Gecko selection has some
subtle but important behavior differences from the Java selection.
This patch separates out Gecko selection from Java selection so that
they're only loosely coupled. The two selections will periodically
synchronize through events and notifications, but at certain times they
may fall out-of-sync, for example when a composition is active. This
shouldn't affect functionality in a major way, and it's an acceptable
trade-off.
Right now we call disposeNative on GeckoEditable in the
nsWindow::Natives destructor. However, we may still have pending native
calls in the event queue at that point, and these events will cause
exceptions when handled. This patch makes GeckoEditable call
disposeNative, after ensuring there's no pending calls.
GeckoEvent.KEY_EVENT and GeckoEvent.IME_EVENT used to count as UI events
for the hang monitor. We should count the new native calls as native
events too through this patch.
Move the IME event handler implementation in nsWindow::OnIMEEvent to
individual native calls in nsWindow::Natives. This patch also moves most
member variables and helper functions related to IME to inside
nsWindow::Natives. This has the benefit of better organization and saves
some memory because only the top-level nsWindow now keeps IME states.
GetIMEComposition and RemoveIMEComposition are kept inside nsWindow
because they are not strictly related to IME events, and they are used
by some other event handlers in nsWindow.
In the period after nsWindow is destroyed, but before disposeNative is
called, we should discard any pending native calls. These calls would
result in exceptions anyways because the nsWindow weak pointer is now
null. After disposeNative is called, any native calls will still result
in exceptions because in that case, it's Java code's responsibility to
ensure that calls are not made after disposeNative is called.
This patch adds a separate close() call to nsWindow, and let the
GeckoView decide whether to make that call or not. This lets us use the
static version of disposeNative. If nsWindow is destroyed in the
meantime, we still want to call disposeNative, which would only be
possible using the static version of disposeNative.
It's helpful to have a static DisposeNative when disposing of instances
that are still associated with a native object through an null weak
pointer. In that case, we can't call instance methods because the weak
pointer is null, but we can still call static methods.
This patch implements a new key event handler in nsWindow to replace the
previous implementation.
nsWindow::HandleSpecialKey was removed because it's a relic from XUL
Fennec and I believe we no longer need it for native Fennec.
The bulk of this commit was generated with a script, executed at the top
level of a typical source code checkout. The only non-machine-generated
part was modifying MFBT's moz.build to reflect the new naming.
CLOSED TREE makes big refactorings like this a piece of cake.
# The main substitution.
find . -name '*.cpp' -o -name '*.cc' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \
xargs perl -p -i -e '
s/nsRefPtr\.h/RefPtr\.h/g; # handle includes
s/nsRefPtr ?</RefPtr</g; # handle declarations and variables
'
# Handle a special friend declaration in gfx/layers/AtomicRefCountedWithFinalize.h.
perl -p -i -e 's/::nsRefPtr;/::RefPtr;/' gfx/layers/AtomicRefCountedWithFinalize.h
# Handle nsRefPtr.h itself, a couple places that define constructors
# from nsRefPtr, and code generators specially. We do this here, rather
# than indiscriminantly s/nsRefPtr/RefPtr/, because that would rename
# things like nsRefPtrHashtable.
perl -p -i -e 's/nsRefPtr/RefPtr/g' \
mfbt/nsRefPtr.h \
xpcom/glue/nsCOMPtr.h \
xpcom/base/OwningNonNull.h \
ipc/ipdl/ipdl/lower.py \
ipc/ipdl/ipdl/builtin.py \
dom/bindings/Codegen.py \
python/lldbutils/lldbutils/utils.py
# In our indiscriminate substitution above, we renamed
# nsRefPtrGetterAddRefs, the class behind getter_AddRefs. Fix that up.
find . -name '*.cpp' -o -name '*.h' -o -name '*.idl' | \
xargs perl -p -i -e 's/nsRefPtrGetterAddRefs/RefPtrGetterAddRefs/g'
if [ -d .git ]; then
git mv mfbt/nsRefPtr.h mfbt/RefPtr.h
else
hg mv mfbt/nsRefPtr.h mfbt/RefPtr.h
fi
--HG--
rename : mfbt/nsRefPtr.h => mfbt/RefPtr.h
This commit was generated using the following script, executed at the
top level of a typical source code checkout.
# Don't modify select files in mfbt/ because it's not worth trying to
# tease out the dependencies currently.
#
# Don't modify anything in media/gmp-clearkey/0.1/ because those files
# use their own RefPtr, defined in their own RefCounted.h.
find . -name '*.cpp' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \
grep -v 'mfbt/RefPtr.h' | \
grep -v 'mfbt/nsRefPtr.h' | \
grep -v 'mfbt/RefCounted.h' | \
grep -v 'media/gmp-clearkey/0.1/' | \
xargs perl -p -i -e '
s/mozilla::RefPtr/nsRefPtr/g; # handle declarations in headers
s/\bRefPtr</nsRefPtr</g; # handle local variables in functions
s#mozilla/RefPtr.h#mozilla/nsRefPtr.h#; # handle #includes
s#mfbt/RefPtr.h#mfbt/nsRefPtr.h#; # handle strange #includes
'
# |using mozilla::RefPtr;| is OK; |using nsRefPtr;| is invalid syntax.
find . -name '*.cpp' -o -name '*.mm' | xargs sed -i -e '/using nsRefPtr/d'
# RefPtr.h used |byRef| for dealing with COM-style outparams.
# nsRefPtr.h uses |getter_AddRefs|.
# Fixup that mismatch.
find . -name '*.cpp' -o -name '*.h'| \
xargs perl -p -i -e 's/byRef/getter_AddRefs/g'
Right now we don't allow quitting Fennec when the last nsWindow closes
(e.g. when the last GeckoView is destroyed) because we want to keep the
Gecko thread running throughout the app process lifetime. However, when
we are asked to quit explicitly through nsIAppStartup::Quit, we should
release the hold on nsAppStartup and allow quitting to continue.
The GeckoEditable instance doesn't change for each nsWindow instance.
However, because a GeckoInputConnection is associated with a GeckoView,
when we create a new GeckoView, we need to attach a new
GeckoInputConnection to the existing nsWindow's GeckoEditable. This
patch makes us do that inside nsWindow::Natives::Open by calling
GeckoEditable.OnViewChange.
This patch removes the GeckoEditable code in GeckoAppShell, and make
nsWindow create a GeckoEditable for itself when opening a window.
Instead of calling GeckoAppShell, nsWindow can now call GeckoEditable
methods directly.
We try to generate a C++ constant for static final fields, but that
was failing for inaccessible fields. Now we set the field to be
accessible so that we do end up generating a C++ constant.
The PROCESS_OBJECT GeckoEvent is used to set the layer client object in
Gecko once Gecko is done loading. This patch converts it to a native
call in GeckoView.Window.
This patch adds a specialization for jni::Ref<jni::ObjectArray>, which
includes members for getting the length of the array and accessing
array elements.
We have a pretty messy system of coalescing viewport events that
introduced a race condition during the recent JNI refactoring. This
patch makes that code simpler and fixes the race condition. Instead of
keeping track of a previous viewport event, we now scan the event queue
for previous viewport events. This shouldn't be a perf concern because
we only scan the queue for viewport and native callback events, and stop
scanning as soon as we find another kind of event.
This patch adds a specialization for jni::Ref<jni::ObjectArray>, which
includes members for getting the length of the array and accessing
array elements.
gfxIntSize is just a typedef of gfx::IntSize, so this is very mechanical. The
only tricky part is deciding for each occurrence whether to replace it with
IntSize, gfx::IntSize or mozilla::gfx::IntSize; in all cases I went with the
shortest one that worked given the existing "using namespace" declarations.
--HG--
extra : rebase_source : 67fd15f87222b16defa70ef795c6d77dfacf1c36
Originally, the GeckoThread PROFILE_READY state was chosen to correspond
to the profile-do-change event, to give priority to JNI code (e.g.
window creation) over other events that may be registered under
profile-after-change event. However, this leads to broken tests because
our testing infra expects things like window creation to happen during
profile-after-change at the earliest. This is because we have to wait
for addons like SpecialPowers to be loaded between profile-do-change and
profile-after-change. This patch changes the PROFILE_READY state to
correspond to the profile-after-change event, so things are consistent
again.
A C++ class that implments native JNI methods can choose to inherit
UsesGeckoThreadProxy. Once enabled, all native JNI calls on that class
will be automatically dispatched to the Gecko thread as a runnable event.
nsWindow will implement native methods of GeckoView.Window. This patch
implements the open method, which opens a new window in the same manner
as the CLH, and associates the new nsWindow with the GeckoView.Window
instance.
GeckoView.Window is a class that acts as the interface between
GeckoView in Java and nsWindow in C++. It will contain native methods
that GeckoView will use to interact with nsWindow.
On initialization, Window.open is called to create a nsWindow and
establish the JNI association between Window and the native nsWindow.
Then, whenever Window instance methods are called, the JNI stubs will
automatically call members of nsWindow.
With the new nsAppShell event loop based on runnable events, we need to
implement AndroidGeckoEvent handling as a runnable event. This patch adds
nsAppShell::LegacyGeckoEvent and adopts its implementation from existing
code that handle AndroidGeckoEvent.
nsAppShell is currently based on AndroidGeckoEvent objects, which mirror
GeckoEvent on the Java side. With GeckoEvent going away, we will be
gradually removing AndroidGeckoEvent as well. This patch makes the
nsAppShell event loop based on runnable objects, which derive from
nsAppShell::Event. Using runnable objects is much more flexible and allows
us, for example, to post a lambda to the event loop to be run later.
Gecko on Android follows the Android app model where it never stops
until it is killed by the system or told explicitly to quit. Therefore,
we should exit Gecko when there is no window or the last window is closed.
With this patch the ZoomConstraintsClient updates get broadcast via the observer
service on Android, allowing code in browser.js to switch over to using it.
--HG--
extra : commitid : FZvsgS8s2oT
The patch removes 455 occurrences of FAIL_ON_WARNINGS from moz.build files, and
adds 78 instances of ALLOW_COMPILER_WARNINGS. About half of those 78 are in
code we control and which should be removable with a little effort.
--HG--
extra : rebase_source : 82e3387abfbd5f1471e953961d301d3d97ed2973
If a C++ class implements native calls that all return void, it can
choose to have those calls go through a custom proxy function by
inheriting from mozilla::jni::UsesNativeCallProxy and override the
ProxyNativeCall member.
ProxyNativeCall accepts a rvalue reference to a
functor object specific to each call, and can alter the calling
environment (e.g. dispatch the call to another thread) before issuing
the actual native call through the functor's operator().
Any JNI refs contained in the call are automatically turned into global
refs so that the call can continue to work outside of the original JNI
call.
Native call proxy will be used to implement automatic dispatching of
native calls from the main thread to run on the Gecko thread.
This patch fixes a compile error when using WeakPtr, where Impl* was
expected but SupportsWeakPtr<Impl>* was given.
This patch also fixes a compile error when using the DisposeNative
implementation provided by the autogenerated Natives class. e.g.,
> struct Foo : Bar::Natives<Foo> {
> using Bar::Natives<Foo>::DisposeNative;
> };
This uses a default implementation of DisposeNative instead of a custom
implementation, and resulted in a compile error that this patch fixes.
The mangled name of a NativeStubImpl instantiation is longer than
necessary because of the ReturnType arg. This patch turns it into a bool
parameter. It also reorders the parameters for cleanness.
Add more constructors in LocalRef and GlobalRef to accommodate use cases
where a JNIEnv is already available for performance reasons. Also add
more null-checks when creating references for performance reasons.
One thing we do in the Fennec CLH is to make a speculative connection
based on the URI that's passed in. However, by the time the CLH runs,
we're far along into startup, and the advantage of a speculative
connection is reduced. This patch implements making speculative
connection as a method in GeckoThread, so that Fennec can make a
speculative connection without relying on the Fennec CLH.
Many Gecko operations depend on the profile being available. This
patch adds a PROFILE_READY Gecko state so that we can queue calls
until profile is loaded.
clang doesn't like it when we declare things as a struct in one place
and a class in another. This change makes all the current usages
consistent and clang happy.
GeneratedJNIWrappers.h was updated in bug 1192079 to use inherited
constructors, which is a gcc 4.8 feature. Many people are still using an
older version of NDK which only comes with gcc 4.7.
First we need to set the Gecko thread JNIEnv* in nsAndroidStartup, but
after that we can initialize and deinitialize the rest of JNI, including
AndroidBridge, in GeckoAppShell. This makes nsAppShell control the
AndroidBridge lifetime. Over time, parts of the AndroidBridge
functionality will be migrated to nsAppShell.
Merge all the init code into AndroidBridge constructor and
AndroidBridge::ConstructBridge; merge all the deinit code into
AndroidBridge destructor and AndroidBridge::DeconstructBridge.
In particular, the SetMainThread call is obsolete and removed.
Make NativeJSContainer/NativeJSObject Java objects own their
corresponding C++ objects directly, to reduce an extra
allocation/deallocation for each object and to simplify code.
Add a direct ownership model where the Java object owns the
corresponding C++ object directly, in addition to the WeakPtr model
where the Java object owns a WeakPtr to the C++ object. The WeakPtr
model is chosen when the implementing C++ class inherits from
SupportsWeakPtr. Otherwise, the direct ownership model is chosen. Under
the direct ownership model, a UniquePtr object must be used to attach
the containing C++ object to a Java object, to ensure ownership is
passed on to the Java object.
This patch adds:
* Conversion operator from String::Param to String::LocalRef.
* More overloads of the jni::ThrowException function.
* name members to built-in types like jni::Object, jni::String, etc.
This allows using jni::Accessors::EnsureClassRef on built-in types
to get built-in class refs (e.g. jclass for java/lang/String).
* Ability to implicitly convert LocalRef<Cls> to LocalRef<Object>
* Fixes for bugs in LocalRef/GlobalRef where new refs are not created.
* Fixes for inaccurate uses of mozilla::Forward in favor of mozilla::Move
This patch transforms RestrictedProfiles to delegate isAllowed() and
canLoadUrl() calls to an object implementing the RestrictionConfiguration
interface.
DefaultConfiguration, GuestProfileConfiguration and
RestrictedProfileConfiguration are implementing RestrictionConfiguration
and will take care of handling the restrictions for the different types
of profiles.
--HG--
extra : commitid : LQ2YsdyG6oR
extra : rebase_source : 015f7f02c6e7fded16d3811a71f0ae23547e5f71
Add Bundle to the list of SDK classes to generate JNI bindings for. The
generated bindings, like other SDK classes, use XPCOM-style nsresult
to indicate success/failure, and return values through out-parameters.
We use Ref::From() inside TypeAdapter<Ref>::ToNative to convert a raw JNI
ref argument to a Ref argument for the C++ function. However, that
generates a compile error, unless we make TypeAdapter<Ref> a friend of
Ref, because we intentionally made Ref's copy constructor private and
returning from TypeAdapter<Ref>::ToNative requires the copy constructor.
Introduce a JNIObject class that serves as a base class for classes
that wish to use per-instance native methods. JNIObject includes a long
native pointer field that the C++ code accesses to associate the Java
object instance with a C++ object instance.
There is some ambiguity about whether ScheduleComposite will necessarily
trigger a composite all the way to nsWindow::DrawWindowUnderlay. Android
robocop tests assume it will, because they rely on DrawWindowOverlay
being called so they can take a screenshot and make progress,
but this is a very fragile assumption. They also rely on the entire
window being painted, which is also a fragile assumption.
This patch improves the situation by explicitly invalidating the current
window area when Android Java code needs to trigger a composite. This avoids
regressions from future patches in this series which make composition bail
out when there is nothing invalid.
The resulting setup is still a bit fragile for my taste but I'm not sure
what the ideal solution would be.
--HG--
extra : commitid : 3t3xqRdZs24
extra : rebase_source : b23749613663ca805484776ccf5e36b4ff00e3fe
This patch was generated by a script. Here's the source of the script for
future reference:
find . \( -iname "*.cpp" -o -iname "*.h" \) | \
xargs -n 1 sed -i "s/nsRefPtr<nsIRunnable>/nsCOMPtr<nsIRunnable>/g"
Nicholas Nethercote
Carsten "Tomcat" Book
Jim Chen
Sebastian Kaspari
sgiles
Jan Varga
Mark Capella
Phil Ringnalda
Kartikaya Gupta
Randall Barker
Birunthan Mohanathas
Wes Kocher
Fabrice Desré
Nathan Froyd
Hansu Kim
Reuben Morais
Masayuki Nakano
Ahmed Khalil
James Willcox
Chris Peterson
Jeff Walden
Dylan Roeh
Xidorn Quan
William Chen
Aryeh Gregor
Terrence Cole
Nick Robson
Gian-Carlo Pascutto
Matt Woodrow
Byron Campen [:bwc]
Qiang Lu
Ryan VanderMeulen
David Anderson
Makoto Kato
Dragana Damjanovic
Emanuel Hoogeveen
Robert O'Callahan
Juan Gomez
Tom Tromey
Mike Hommey
Shu-yu Guo
Michael Layzell
Eric Rahm
Anthony Tseng
Kyle Machulis
Nicolas Silva
Danilo Cesar Lemes de Paula
Vladimir Vukicevic
Andrea Marchesini
Ehsan Akhgari
Daniel Holbert
Botond Ballo