It's an annotation that is used a lot, and should be used even more, so a
shorter name is better.
MozReview-Commit-ID: 1VS4Dney4WX
--HG--
extra : rebase_source : b26919c1b0fcb32e5339adeef5be5becae6032cf
Outer pointers for object aggregation never get used. Having these
always-null pointers around means extra space to store them and extra
instructions to deal with them. Let's just remove them.
js::Class op are often all null. And when they're not all null, they're often
duplicated among classes. By pulling them out into their own struct, and using a
(possibly null) pointer in js::Class, we can save 114 KiB per process on
64-bit, and half that on 32-bit.
* * *
imported patch separate-ClassOps-2
--HG--
extra : rebase_source : bd751bf247e9491c1966a123dbeffa573657dfb1
There are about 600 of these, at 16 bytes each, and this change makes all of
them shareable between processes
--HG--
extra : rebase_source : b1824f0a022389aeb02d925c4d788e5a671bf782
Using explicit iteration at measurement sites is much simpler and nicer than
using callbacks.
--HG--
extra : rebase_source : 8b3f7aa702743b665383766b66a866a2c3d17240
FindFreeEntry() has one caller, so using MOZ_ALWAYS_INLINE should be good
enough for it. As for SearchTable(), NS_FASTCALL is the same as
PL_DHASH_FASTCALL and so can be used instead.
--HG--
extra : rebase_source : 814f96d4751922785358e7a4f9d64fcf522364c1
They're trivial and very hot. This reduces binary size in a 64-bit Linux opt build by 20 KiB and avoiding the calls can only help performance.
--HG--
extra : rebase_source : 774e6ffff9c787fa5444f939d1236d994ac8cf5b
The JS engine does not export symbols outside of XUL, so having these
defined inside mozglue apparently causes linking errors on some
platforms with the patches in bug 1120016.
This patch moves enough methods outside of mozglue that the patch in
that other bug will still link on all platforms, without moving so
much out that there are other linking errors.
--HG--
rename : xpcom/glue/nsCycleCollectionParticipant.cpp => xpcom/base/nsCycleCollectorTraceJSHelpers.cpp
The patch changes all uses of SizeOfIncludingThisMustBeUnshared() to
SizeOfIncludingThisIfUnshared(). This incurs the (tiny) cost of an unnecessary
IsReadonly() check for guaranteed-unshared strings, but avoids the possible
assertion failures that would occur when MustBeUnshared() was used incorrectly
on shared strings, which is an easy mistake to make.
--HG--
extra : rebase_source : b1e91f1c19bcbe0521b0ce461d6c90512ca938ef
xpcom/glue/PLDHashTable.cpp:471:10 [-Wunreachable-code-return] 'return' will never be executed
xpcom/tests/TestAutoPtr.cpp:324:9 [-Wunreachable-code] code will never be executed
xpcom/tests/TestBlockingProcess.cpp:6:11 [-Wunreachable-code-return] 'return' will never be executed
The logging interface is moved to xpcom/base, a LogModule wrapper for PR_Log is
added, a thread-safe LogModuleManager is added, and a LazyLogModule class used
to lazily load log modules in a thread-safe manner is added.
--HG--
rename : xpcom/glue/Logging.h => xpcom/base/Logging.h
extra : rebase_source : 89b76664d9477e2c894448cdea4dae1c61f8ca24
The bulk of this commit was generated with a script, executed at the top
level of a typical source code checkout. The only non-machine-generated
part was modifying MFBT's moz.build to reflect the new naming.
CLOSED TREE makes big refactorings like this a piece of cake.
# The main substitution.
find . -name '*.cpp' -o -name '*.cc' -o -name '*.h' -o -name '*.mm' -o -name '*.idl'| \
xargs perl -p -i -e '
s/nsRefPtr\.h/RefPtr\.h/g; # handle includes
s/nsRefPtr ?</RefPtr</g; # handle declarations and variables
'
# Handle a special friend declaration in gfx/layers/AtomicRefCountedWithFinalize.h.
perl -p -i -e 's/::nsRefPtr;/::RefPtr;/' gfx/layers/AtomicRefCountedWithFinalize.h
# Handle nsRefPtr.h itself, a couple places that define constructors
# from nsRefPtr, and code generators specially. We do this here, rather
# than indiscriminantly s/nsRefPtr/RefPtr/, because that would rename
# things like nsRefPtrHashtable.
perl -p -i -e 's/nsRefPtr/RefPtr/g' \
mfbt/nsRefPtr.h \
xpcom/glue/nsCOMPtr.h \
xpcom/base/OwningNonNull.h \
ipc/ipdl/ipdl/lower.py \
ipc/ipdl/ipdl/builtin.py \
dom/bindings/Codegen.py \
python/lldbutils/lldbutils/utils.py
# In our indiscriminate substitution above, we renamed
# nsRefPtrGetterAddRefs, the class behind getter_AddRefs. Fix that up.
find . -name '*.cpp' -o -name '*.h' -o -name '*.idl' | \
xargs perl -p -i -e 's/nsRefPtrGetterAddRefs/RefPtrGetterAddRefs/g'
if [ -d .git ]; then
git mv mfbt/nsRefPtr.h mfbt/RefPtr.h
else
hg mv mfbt/nsRefPtr.h mfbt/RefPtr.h
fi
--HG--
rename : mfbt/nsRefPtr.h => mfbt/RefPtr.h
It's a little more convenient than checking Count(), and also gives
nsTHashtable the same interface as nsTArray (for this operation, at
least), which seems worthwhile.
Having a template parameter conflict with a global name is terribly
inconvenient, so let's try to avoid that by renaming the 'RefPtr'
template parameter to something else.
This class can be used instead of raw pointer for a sound leaking-by-default
behavior. Also it could take advantage of move semantic check in the future.
--HG--
extra : source : 6bf72b4eaa92b13d42b547d8aeee677489a4d3e2
We don't need to reinterpret_cast when casting from void*, and we don't
need to reinterpret_cast when we're casting up and down a class
hierarchy. static_cast takes care of those cases just fine, and doesn't
scare the reader into thinking that nsTHashtable is doing something
unusual.
This class can be used instead of raw pointer for a sound leaking-by-default
behavior. Also it could take advantage of move semantic check in the future.
--HG--
extra : source : 47cd2c22bafc8d4bb1c7e1dce3b45517aaec199f
This changeset replaces all of the
// char16_t[]
optional bytes someProperty = 1;
one- and two-byte string properties in the CoreDump.proto protobuf definition
file with:
oneof {
// char16_t[]
bytes someProperty = 1;
uint64 somePropertyRef = 2;
}
The first time the N^th unique string is serialized, then someProperty is used
and the full string is serialized in the protobuf message. All following times
that string is serialized, somePropertyRef is used and its value is N.
Among the other things, this also changes JS::ubi::Edge::name from a raw pointer
with commented rules about who does or doesn't own and should and shouldn't free
the raw pointer to a UniquePtr that enforces those rules rather than relying on
developers reading and obeying the rules in the comments.
This class can be used instead of raw pointer for a sound leaking-by-default
behavior. Also it could take advantage of move semantic check in the future.
--HG--
extra : source : 3dbd000739dc0ea214a2292e3983469e41e99686
The patch removes 455 occurrences of FAIL_ON_WARNINGS from moz.build files, and
adds 78 instances of ALLOW_COMPILER_WARNINGS. About half of those 78 are in
code we control and which should be removable with a little effort.
--HG--
extra : rebase_source : 82e3387abfbd5f1471e953961d301d3d97ed2973
After this change, we have ShallowSizeOf{In,Ex}cludingThis(), which don't do
anything to measure children. (They can be combined with iteration to measure
children.)
--HG--
extra : rebase_source : f98420176f50990bbc5a25e35788328154cfeb00
After this change, we have ShallowSizeOf{In,Ex}cludingThis(), which don't do
anything to measure children. (They can be combined with iteration to measure
children.)
And we still have the existing single-arg SizeOf{In,Ex}cluding() functions,
which work if the entry type itself defines SizeOfExcludingThis().
--HG--
extra : rebase_source : f93de9b789c21b1b148bed9de795f663f77c9dd9
After this change, we have PLDHashTable::ShallowSizeOf{In,Ex}cludingThis(),
which don't do anything to measure children. (They can be combined with
iteration to measure children.)
This patch also removes the PL_DHashTableSizeOf{In,Ex}cludingThis() functions.
They're not necessary because the methods can be used instead.
Finally, the patch deliberately converts some SizeOfExcludingThis() calls to
SizeOfIncludingThis(). These are all done on heap pointers so this change is
valid.
--HG--
extra : rebase_source : b1d51096a8e7dcac29d7efd92e28938836ff5481
This makes it clearer that, unlike how SizeOf*() functions usually work, this
doesn't measure any children hanging off the array.
And do likewise for nsTObserverArray.
--HG--
extra : rebase_source : 6a8c8d8ffb53ad51b5773afea77126cdd767f149
StorensRefPtrPassByPtr is currently used for storing reference-counted
types passed as T* template arguments to NS_NewRunnableMethodWith*.
We'd also like to use it to store nsRefPtr<T> template arguments. While
it could be used in its current form, it'd be better for its constructor
to support forwarding, so that something like:
NS_NewRunnableMethodWithArg<nsRefPtr<T>>(..., nsRefPtr<T>(local));
doesn't cause unnecessary reference counting.
CLOSED TREE
--HG--
extra : amend_source : 0b7ac18429b248cf05cfe33f6b2f6efdf1602c38
extra : histedit_source : bdb11dafa100809ec17491e5711fb0b507e023c6%2C5e4134650a804859dc8b3078688fa4655052263f
The bulk of this commit was generated by running:
run-clang-tidy.py \
-checks='-*,llvm-namespace-comment' \
-header-filter=^/.../mozilla-central/.* \
-fix
This is a particularly nice example of how iterators can be so much nicer than
Enumerate()-style functions:
1 file changed, 4 insertions(+), 33 deletions(-)
--HG--
extra : rebase_source : 757f75b90cb4c624143c236f9743edf158f72d66
nsBaseHashtable has both EnumerateRead() and Enumerate(). A comment claims that
the latter locks the table, but this is false, so I removed the comment. Other
than that the only notable difference between them is that they have slightly
different types for dealing with values (|UserDataType| vs |DataType&|) so I've
implemented both GetUserData() and GetData(), allowing either type to be used.
--HG--
extra : rebase_source : 9d61cc8f4c14082c9f1939ff3ced2b697e043f42
Using g_slice_set_config() fails with newer glib because the slice allocator
now has a static constructor that runs when glib is loaded, consequently
emitting a noisy error message which confuses people into believing it's the
root of their problems.
The only way left to force the slice allocator to use "system" malloc (in
practice, jemalloc) is to set the G_SLICE environment variable to
always-malloc, and that needs to happen before glib is loaded.
Fortunately, the firefox and plugin-container executables don't depend on
glib. Unfortunately, webapprt does, so the problem remains for web apps
running through it. xpcshell and other executables that depend on libxul
directly (as opposed to loading it dynamically) are not covered either.
The original motivation for the Iterator/RemovingIterator split was that
PLDHashTable Checker class would treat them differently. But that didn't end up
happening (see bug 1131308). So this patch merges them. This is a small code
size win now but it will become bigger when I add iterators to nsTHashTable and
nsBaseHashtable.
The only complication is that PLDHashTable::Iter() is now non-const, which is
a problem if you use it in a const method. So I added PLDHashTable::ConstIter()
which is used in just two places. It's a bit of a hack -- effectively a
const_cast -- but I don't think it's too bad.
- Its move constructor was moving |aOther.mTable| instead of |aOther|. This
meant that |aOther| wasn't being zeroed out appropriately.
- test_pldhash_RemovingIterator() was testing Iterator's move constructor
instead of RemovingIterator's move constructor, due to a copy/paste
mistake.
--HG--
extra : rebase_source : 1f4880893875218ddb155c76d329e84d884c0432
Using g_slice_set_config() fails with newer glib because the slice allocator
now has a static constructor that runs when glib is loaded, consequently
emitting a noisy error message which confuses people into believing it's the
root of their problems.
The only way left to force the slice allocator to use "system" malloc (in
practice, jemalloc) is to set the G_SLICE environment variable to
always-malloc, and that needs to happen before glib is loaded.
Fortunately, the firefox and plugin-container executables don't depend on
glib. Unfortunately, webapprt does, so the problem remains for web apps
running through it. xpcshell and other executables that depend on libxul
directly (as opposed to loading it dynamically) are not covered either.
This patch factors out the existing capacity calculation code in HashShift()
into a new function called BestCapacity(), and then reuses it for
post-enumeration shrinking.
BestCapacity() computes capacity with |CeilingLog2(ceil(length * 4 / 3))|,
which ensures a minimum capacity while respecting the "max 75% full" and
"capacity is a power of two" constraints. In contrast, the old post-enumeration
shrink calculation was |CeilingLog2(length + length/2)|, which gives higher
results in some cases. (Both calculations also ensured the capacity wasn't too
small.) E.g. if length is 48, the former calculation will give 64, while the
latter will give 128.
Therefore, post-enumeration shrinking will no longer give a
larger-than-necessary capacity some cases. This feels like the right thing to
do in isolation, and making it consistent with HashShift() -- used during table
construction -- is also good.
--HG--
extra : rebase_source : 55e982b601c345d10da7abd03a13aec3f5b61598
This change splits PLDHashTable::Iterator::NextEntry() into two separate
functions, which allow you to get the current element and advance the iterator
separately, which means you can use a for-loop to iterate instead of a
while-loop.
As part of this change, the internals of PLDHashTable::Iterator were
significantly changed and simplified (and modelled after js::HashTable's
equivalent code). It's no longer duplicating code from PL_DHashTableEnumerator.
The chaos mode code was a casualty of this, but given how unreliable that code
has proven to be (see bug 1173212, bug 1174046) this is for the best. (We can
reimplement chaos mode once PLDHashTable::Iterator is back on more solid
footing again, if we think it's important.)
All these changes will make it much easier to add an alternative Iterator that
removes elements, which was turning out to be difficult with the prior code.
In order to make the for-loop header usually fit on a single line, I
deliberately renamed a bunch of things to have shorter names.
In summary, you used to write this:
PLDHashTable::Iterator iter(&table);
while (iter.HasMoreEntries()) {
auto entry = static_cast<FooEntry*>(iter.NextEntry());
// ... do stuff with |entry| ...
}
// iter's scope extends beyond here
and now you write this:
for (auto iter = table.Iter(); !iter.Done(); iter.Next()) {
auto entry = static_cast<FooEntry*>(iter.Get());
// ... do stuff with |entry| ...
}
// iter's scope doesn't reach here
--HG--
extra : rebase_source : fa5cac2fc50b1ab7624030bced4763131280f4d8
If you use PLDHashTable::Iterator in chaos mode with a table with zero
capacity, a |% 0| operation takes place in randomUint32LessThan. This change
avoids that.
--HG--
extra : rebase_source : 85f2affb57c2402f40f3d117434b8300e7f204b7
This change reimplements nsTHashtable::Clear() using PLDHashable::Clear(). This
changes its semantics slightly -- the old version would clear the table but
leave its capacity unchanged. The new version will adjust the capacity
to the default, though the entry storage will only be re-allocated when the
first new element is added.
Iterator::NextEntry() miscomputes |entryLimit|. This doesn't matter in
non-chaos mode because we'll always find a live entry before hitting that
limit. But it does matter in chaos mode because it means we don't wrap around
when we should.
It's clear how this mistake was made -- the code from Enumerate() was copied.
In Enumerate() |mEntryStore| and |entryAddr| are the same when |entryLimit| is
computed, so you can use them interchangeably. But in NextEntry() |mEntryAddr|
will have moved past |mEntryStore|, so you have to use |mEntryStore|. I changed
both functions in the same way to keep the correspondence between them obvious.
--HG--
extra : rebase_source : f27558b3179be394526d1c3f82ffbae0fb58b2b9
Make it harder for users to accidentally reintroduce usage of the PR_LOG macros
when using 'mozilla/Logging.h'. This can still be worked around by directly
including 'prlog.h' (and not 'mozilla/Logging.h') if absolutely necessary.
This adds the mozilla::LogLevel enum class. Additionaly a log_test function is
added to use rather than a macro, this allows us to enforce only
mozilla::LogLevel is passed into the function.
|mOps| is always non-null now, and there's no longer any distinction between
and uninitialized and initialized table. Yay.
--HG--
extra : rebase_source : 3d1fb72aee4dd21ff20db0ff3166d4e932ade897
Make it harder for users to accidentally reintroduce usage of the PR_LOG macros
when using 'mozilla/Logging.h'. This can still be worked around by directly
including 'prlog.h' (and not 'mozilla/Logging.h') if absolutely necessary.
This adds the mozilla::LogLevel enum class. Additionaly a log_test function is
added to use rather than a macro, this allows us to enforce only
mozilla::LogLevel is passed into the function.
Make it harder for users to accidentally reintroduce usage of the PR_LOG macros
when using 'mozilla/Logging.h'. This can still be worked around by directly
including 'prlog.h' (and not 'mozilla/Logging.h') if absolutely necessary.
This adds the mozilla::LogLevel enum class. Additionaly a log_test function is
added to use rather than a macro, this allows us to enforce only
mozilla::LogLevel is passed into the function.
This helps upcoming changes, and relieves backends from path resolution.
This has the side effect of chaning the order of some unified sources,
which consequently breaks nsTextFormatter because it declares snprintf
methods after nsStringAPI #defines it.
The added static_casts will be removed when PLDHashTable and PLDHashTable2 are
merged.
--HG--
extra : rebase_source : 49dacef8a86adc088610449b6bd2ef9345af5a84
CLOSED TREE
Backed out changeset 12ce98475c6e (bug 1119980)
Backed out changeset bdb8d05f8870 (bug 1119980)
Backed out changeset a68a18840492 (bug 1119980)
This is a temporary sub-class of PLDHashTable that will allow PLDHashTable to
be incrementally transitioned from manual initialization/finalization (via
explicit Init()/Fini() calls) to automatic initialization/finalization (via an
initializing constructor and a destructor). Once all PLDHashTable instances are
converted to PLDHashTable2, it can be folded back into PLDHashTable and the "2"
suffix can be dropped.
--HG--
extra : rebase_source : 674e7bd9320dc1db8879f842df05a7d995069e97
The SetOps() call is no longer necessary now that PLDHashTable has a move
constructor.
This change originally landed in one of the patches from bug 1161377, which was
subsequently backed out.
Due to Android startup regressions (bug 1163066) and plugin crashes (bug
1165155).
--HG--
extra : rebase_source : 380f79e67dff4c4eaa2614f286a4d0669666b652
The destructor is "opt-in" -- there's a flag that makes it a no-op unless the
table was initialized with the initializing constructor. This will allow us to
incrementally convert existing tables from manual to automatic
initialization/finalization. This is important because some of the existing
uses are tricky (impossible?) to convert to the automatic style.
This fixes the following problems with PLDHashTable::operator=:
- It doesn't handle self-assigments.
- It leaks the memory used by the assigned-to table.
- It doesn't leave the assigned-from table in a safely destructable state.
--HG--
extra : rebase_source : 433ac3418c00e3bb6d376982e4c679d27e42a377
It's no longer needed now that entry storage isn't allocated there. (The other
possible causes of failures in that function are less interesting and simply
crashing is a reasonable thing to do for them.)
This also makes PL_DNewHashTable() infallible, so I removed some
now-unnecessary checks of its result.
--HG--
extra : rebase_source : 4c6ab0c449bc18e8bace8bf036b5bd78d3a2f1c4
mData will get automatically constructed when DataType is a class or
struct with a default constructor, but a number of uses of
nsBaseHashtable use integer or pointer types as DataType. Explicitly
initialize mData so that it looks as though we're fully initializing the
class in such cases.
Coverty complains that we're using sizeof(mData) here instead of
sizeof(*mData). They're equivalent for all the architectures we care about,
but go ahead and tidy up the syntax to silence the static analyzer.
Carsten "Tomcat" Book
Nicholas Nethercote
Kyle Huey
Jean-Yves Avenard
Chris Peterson
Andreas Pehrson
Nathan Froyd
Jonathan Watt
Wes Kocher
Botond Ballo
Vladimir Vukicevic
Gregory Szorc
Eric Rahm
Andrew McCreight
Aidin Gharibnavaz
Birunthan Mohanathas
Phil Ringnalda
Sylvestre Ledru
Jeff Muizelaar
Gabriele Svelto
Terrence Cole
Olli Pettay
Jeff Walden
sajitk
Nathan Froyd
Ehsan Akhgari
Xidorn Quan
Nick Fitzgerald
Jason Orendorff
Kan-Ru Chen
Michael Layzell
Andrew McCreight
Seth Fowler
Miko Mynttinen
Aryeh Gregor
Nicholas Hurley
Bobby Holley
Ryan VanderMeulen
Jim Blandy
Jacek Caban
Benoit Girard
Randell Jesup
Mike Hommey
Ted Mielczarek
Cervantes Yu
Gerald Squelart
Ganesh Sahukari
Steve Fink
Matt Woodrow
Jan de Mooij
Andrea Marchesini