moz-skia/tools/render_pictures_main.cpp

374 строки
12 KiB
C++
Исходник Обычный вид История

/*
* Copyright 2012 Google Inc.
*
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
#include "CopyTilesRenderer.h"
#include "SkBitmap.h"
#include "SkBitmapFactory.h"
#include "SkCanvas.h"
#include "SkDevice.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
#include "SkFlags.h"
#include "SkGraphics.h"
#include "SkImageDecoder.h"
#include "SkImageEncoder.h"
#include "SkMath.h"
#include "SkOSFile.h"
#include "SkPicture.h"
#include "SkStream.h"
#include "SkString.h"
#include "SkTArray.h"
#include "PictureRenderer.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
#include "PictureRenderingFlags.h"
#include "picture_utils.h"
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
// Flags used by this file, alphabetically:
DEFINE_int32(clone, 0, "Clone the picture n times before rendering.");
DECLARE_bool(deferImageDecoding);
DEFINE_int32(maxComponentDiff, 256, "Maximum diff on a component, 0 - 256. Components that differ "
"by more than this amount are considered errors, though all diffs are reported. "
"Requires --validate.");
DECLARE_string(r);
DEFINE_string(w, "", "Directory to write the rendered images.");
DEFINE_bool(writeWholeImage, false, "In tile mode, write the entire rendered image to a "
"file, instead of an image for each tile.");
DEFINE_bool(validate, false, "Verify that the rendered image contains the same pixels as "
"the picture rendered in simple mode. When used in conjunction with --bbh, results "
"are validated against the picture rendered in the same mode, but without the bbh.");
static void make_output_filepath(SkString* path, const SkString& dir,
const SkString& name) {
sk_tools::make_filepath(path, dir, name);
// Remove ".skp"
path->remove(path->size() - 4, 4);
}
#include "SkData.h"
#include "SkLruImageCache.h"
static SkLruImageCache gLruImageCache(1024*1024);
#ifdef SK_BUILD_FOR_ANDROID
#include "SkAshmemImageCache.h"
#include "SkImage.h"
static SkImageCache* cache_selector(const SkImage::Info& info) {
if (info.fWidth * info.fHeight > 32 * 1024) {
return SkAshmemImageCache::GetAshmemImageCache();
}
return &gLruImageCache;
}
#endif
static bool lazy_decode_bitmap(const void* buffer, size_t size, SkBitmap* bitmap) {
void* copiedBuffer = sk_malloc_throw(size);
memcpy(copiedBuffer, buffer, size);
SkAutoDataUnref data(SkData::NewFromMalloc(copiedBuffer, size));
SkBitmapFactory factory(&SkImageDecoder::DecodeMemoryToTarget);
#ifdef SK_BUILD_FOR_ANDROID
factory.setCacheSelector(&cache_selector);
#else
factory.setImageCache(&gLruImageCache);
#endif
return factory.installPixelRef(data, bitmap);
}
static bool render_picture(const SkString& inputPath, const SkString* outputDir,
sk_tools::PictureRenderer& renderer,
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
SkBitmap** out) {
SkString inputFilename;
sk_tools::get_basename(&inputFilename, inputPath);
SkFILEStream inputStream;
inputStream.setPath(inputPath.c_str());
if (!inputStream.isValid()) {
SkDebugf("Could not open file %s\n", inputPath.c_str());
return false;
}
bool success = false;
SkPicture* picture;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (FLAGS_deferImageDecoding) {
picture = SkNEW_ARGS(SkPicture, (&inputStream, &success, &lazy_decode_bitmap));
} else {
picture = SkNEW_ARGS(SkPicture, (&inputStream, &success, &SkImageDecoder::DecodeMemory));
}
if (!success) {
SkDebugf("Could not read an SkPicture from %s\n", inputPath.c_str());
return false;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
for (int i = 0; i < FLAGS_clone; ++i) {
SkPicture* clone = picture->clone();
SkDELETE(picture);
picture = clone;
}
SkDebugf("drawing... [%i %i] %s\n", picture->width(), picture->height(),
inputPath.c_str());
renderer.init(picture);
renderer.setup();
SkString* outputPath = NULL;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (NULL != outputDir && outputDir->size() > 0) {
outputPath = SkNEW(SkString);
make_output_filepath(outputPath, *outputDir, inputFilename);
}
success = renderer.render(outputPath, out);
if (outputPath) {
if (!success) {
SkDebugf("Could not write to file %s\n", outputPath->c_str());
}
SkDELETE(outputPath);
}
renderer.end();
SkDELETE(picture);
return success;
}
static inline int getByte(uint32_t value, int index) {
SkASSERT(0 <= index && index < 4);
return (value >> (index * 8)) & 0xFF;
}
static int MaxByteDiff(uint32_t v1, uint32_t v2) {
return SkMax32(SkMax32(abs(getByte(v1, 0) - getByte(v2, 0)), abs(getByte(v1, 1) - getByte(v2, 1))),
SkMax32(abs(getByte(v1, 2) - getByte(v2, 2)), abs(getByte(v1, 3) - getByte(v2, 3))));
}
namespace {
class AutoRestoreBbhType {
public:
AutoRestoreBbhType() {
fRenderer = NULL;
fSavedBbhType = sk_tools::PictureRenderer::kNone_BBoxHierarchyType;
}
void set(sk_tools::PictureRenderer* renderer,
sk_tools::PictureRenderer::BBoxHierarchyType bbhType) {
fRenderer = renderer;
fSavedBbhType = renderer->getBBoxHierarchyType();
renderer->setBBoxHierarchyType(bbhType);
}
~AutoRestoreBbhType() {
if (NULL != fRenderer) {
fRenderer->setBBoxHierarchyType(fSavedBbhType);
}
}
private:
sk_tools::PictureRenderer* fRenderer;
sk_tools::PictureRenderer::BBoxHierarchyType fSavedBbhType;
};
}
static bool render_picture(const SkString& inputPath, const SkString* outputDir,
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
sk_tools::PictureRenderer& renderer) {
int diffs[256] = {0};
SkBitmap* bitmap = NULL;
bool success = render_picture(inputPath,
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
FLAGS_writeWholeImage ? NULL : outputDir,
renderer,
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
FLAGS_validate || FLAGS_writeWholeImage ? &bitmap : NULL);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (!success || ((FLAGS_validate || FLAGS_writeWholeImage) && bitmap == NULL)) {
SkDebugf("Failed to draw the picture.\n");
SkDELETE(bitmap);
return false;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (FLAGS_validate) {
SkBitmap* referenceBitmap = NULL;
sk_tools::PictureRenderer* referenceRenderer;
// If the renderer uses a BBoxHierarchy, then the reference renderer
// will be the same renderer, without the bbh.
AutoRestoreBbhType arbbh;
if (sk_tools::PictureRenderer::kNone_BBoxHierarchyType !=
renderer.getBBoxHierarchyType()) {
referenceRenderer = &renderer;
referenceRenderer->ref(); // to match auto unref below
arbbh.set(referenceRenderer, sk_tools::PictureRenderer::kNone_BBoxHierarchyType);
} else {
referenceRenderer = SkNEW(sk_tools::SimplePictureRenderer);
}
SkAutoTUnref<sk_tools::PictureRenderer> aurReferenceRenderer(referenceRenderer);
success = render_picture(inputPath, NULL, *referenceRenderer,
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
&referenceBitmap);
if (!success || NULL == referenceBitmap || NULL == referenceBitmap->getPixels()) {
SkDebugf("Failed to draw the reference picture.\n");
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
if (success && (bitmap->width() != referenceBitmap->width())) {
SkDebugf("Expected image width: %i, actual image width %i.\n",
referenceBitmap->width(), bitmap->width());
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
if (success && (bitmap->height() != referenceBitmap->height())) {
SkDebugf("Expected image height: %i, actual image height %i",
referenceBitmap->height(), bitmap->height());
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
for (int y = 0; success && y < bitmap->height(); y++) {
for (int x = 0; success && x < bitmap->width(); x++) {
int diff = MaxByteDiff(*referenceBitmap->getAddr32(x, y),
*bitmap->getAddr32(x, y));
SkASSERT(diff >= 0 && diff <= 255);
diffs[diff]++;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (diff > FLAGS_maxComponentDiff) {
SkDebugf("Expected pixel at (%i %i) exceedds maximum "
"component diff of %i: 0x%x, actual 0x%x\n",
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
x, y, FLAGS_maxComponentDiff,
*referenceBitmap->getAddr32(x, y),
*bitmap->getAddr32(x, y));
SkDELETE(bitmap);
SkDELETE(referenceBitmap);
return false;
}
}
}
SkDELETE(referenceBitmap);
for (int i = 1; i <= 255; ++i) {
if(diffs[i] > 0) {
SkDebugf("Number of pixels with max diff of %i is %i\n", i, diffs[i]);
}
}
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (FLAGS_writeWholeImage) {
sk_tools::force_all_opaque(*bitmap);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (NULL != outputDir && FLAGS_writeWholeImage) {
SkString inputFilename;
sk_tools::get_basename(&inputFilename, inputPath);
SkString outputPath;
make_output_filepath(&outputPath, *outputDir, inputFilename);
outputPath.append(".png");
if (!SkImageEncoder::EncodeFile(outputPath.c_str(), *bitmap,
SkImageEncoder::kPNG_Type, 100)) {
SkDebugf("Failed to draw the picture.\n");
success = false;
}
}
}
SkDELETE(bitmap);
return success;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
static int process_input(const char* input, const SkString* outputDir,
sk_tools::PictureRenderer& renderer) {
SkOSFile::Iter iter(input, "skp");
SkString inputFilename;
int failures = 0;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
SkDebugf("process_input, %s\n", input);
if (iter.next(&inputFilename)) {
do {
SkString inputPath;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
SkString inputAsSkString(input);
sk_tools::make_filepath(&inputPath, inputAsSkString, inputFilename);
if (!render_picture(inputPath, outputDir, renderer)) {
++failures;
}
} while(iter.next(&inputFilename));
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
} else if (SkStrEndsWith(input, ".skp")) {
SkString inputPath(input);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (!render_picture(inputPath, outputDir, renderer)) {
++failures;
}
} else {
SkString warning;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
warning.printf("Warning: skipping %s\n", input);
SkDebugf(warning.c_str());
}
return failures;
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
int tool_main(int argc, char** argv);
int tool_main(int argc, char** argv) {
SkFlags::SetUsage("Render .skp files.");
SkFlags::ParseCommandLine(argc, argv);
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (FLAGS_r.isEmpty()) {
SkDebugf(".skp files or directories are required.\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (FLAGS_maxComponentDiff < 0 || FLAGS_maxComponentDiff > 256) {
SkDebugf("--maxComponentDiff must be between 0 and 256\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (FLAGS_maxComponentDiff != 256 && !FLAGS_validate) {
SkDebugf("--maxComponentDiff requires --validate\n");
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (FLAGS_clone < 0) {
SkDebugf("--clone must be >= 0. Was %i\n", FLAGS_clone);
exit(-1);
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
SkString errorString;
SkAutoTUnref<sk_tools::PictureRenderer> renderer(parseRenderer(errorString,
kRender_PictureTool));
if (errorString.size() > 0) {
SkDebugf("%s\n", errorString.c_str());
}
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
if (renderer.get() == NULL) {
exit(-1);
}
SkAutoGraphics ag;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
SkString outputDir;
if (FLAGS_w.count() == 1) {
outputDir.set(FLAGS_w[0]);
}
int failures = 0;
Created my own flag parser, based off of gflags. Share common code between bench_ and render_ to set up the PictureRenderer. Fix an include error in SkPictureRenderer.h. Simplified parameter passing in render_pictures_main. Switch to using an SkAutoTUnref for the PictureRenderer. I also changed the input format somewhat, so the buildbots need to be updated as well: https://codereview.appspot.com/7441044/ Fixed a bug in PictureBenchmark where calling setTimeIndividualTiles(false) sets the member variable to true. Removed setDeviceType from PictureBenchmark, since only the PictureRenderer needs to know which device type to use. Some changes to the input format: '--logPerIter' no longer takes a 1 or 0. Instead, '--logPerIter' turns it on and '--nologPerIter' turns it off (with off as the default). (Note that this is for bench_pictures; bench still uses the old format) Change '--device' to '--config' and 'bitmap' to '8888' to be the same as gm. Requires '--r' before inputs (to match gm), though there can be multiple inputs following it. Changed --enable-deferred-image-decoding (which no one uses but me yet anyway) to --deferImageDecoding, since the former is incompatible with the flag parser. Changes to behavior: Show a short error message on failure (rather than the explanation of all flags). BUG=https://code.google.com/p/skia/issues/detail?id=1094 Review URL: https://codereview.appspot.com/7230053 git-svn-id: http://skia.googlecode.com/svn/trunk@7961 2bbb7eff-a529-9590-31e7-b0007b416f81
2013-03-04 20:41:06 +04:00
for (int i = 0; i < FLAGS_r.count(); i ++) {
failures += process_input(FLAGS_r[i], &outputDir, *renderer.get());
}
if (failures != 0) {
SkDebugf("Failed to render %i pictures.\n", failures);
return 1;
}
#if SK_SUPPORT_GPU
#if GR_CACHE_STATS
if (renderer->isUsingGpuDevice()) {
GrContext* ctx = renderer->getGrContext();
ctx->printCacheStats();
}
#endif
#endif
return 0;
}
#if !defined SK_BUILD_FOR_IOS
int main(int argc, char * const argv[]) {
return tool_main(argc, (char**) argv);
}
#endif