fix - configuration for SPI3 (#123)

* Update SPI config on all  ST targets

#ALL#

Signed-off-by: josesimoes <jose.simoes@eclo.solutions>

* fix  - configuration for SPI3

fix  - configuration for SPI3

Co-authored-by: josesimoes <jose.simoes@eclo.solutions>

CMSIS-OS/ChibiOS/GHI_FEZ_CERB40_NF/target_windows_devices_spi_config.cpp

@@ -3,8 +3,16 @@
 // See LICENSE file in the project root for full license information.
 //
 
-#include "win_dev_spi_native.h"
+#include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI1 //
+//////////
+
+// pin configuration for SPI1
+// port for SCK pin is: GPIOA_SPC
+// port for MISO pin is: GPIOA_SDO
+// port for MOSI pin is: GPIOA_SDI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOA, 5, GPIOA, 6, GPIOA, 7, 5)

CMSIS-OS/ChibiOS/I2M_ELECTRON_NF/target_windows_devices_spi_config.cpp

@@ -3,8 +3,28 @@
 // See LICENSE file in the project root for full license information.
 //
 
-#include "win_dev_spi_native.h"
+#include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI1 //
+//////////
+
+// pin configuration for SPI1
+// port for SCK pin is: SPI1_SCLK
+// port for MISO pin is: SPI1_MISO
+// port for MOSI pin is: SPI1_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOA, 5, GPIOA, 6, GPIOA, 7, 5)
+
+//////////
+// SPI2 //
+//////////
+
+// pin configuration for SPI2
+// port for SCK pin is: SPI2_SCLK
+// port for MISO pin is: SPI2_MISO
+// port for MOSI pin is: SPI2_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOB, 13, GPIOB, 14, GPIOB, 15, 5)

CMSIS-OS/ChibiOS/I2M_OXYGEN_NF/target_windows_devices_spi_config.cpp

@@ -3,8 +3,28 @@
 // See LICENSE file in the project root for full license information.
 //
 
-#include "win_dev_spi_native.h"
+#include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI1 //
+//////////
+
+// pin configuration for SPI1
+// port for SCK pin is: SPI1_SCLK
+// port for MISO pin is: SPI1_MISO
+// port for MOSI pin is: SPI1_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOA, 5, GPIOA, 6, GPIOA, 7, 5)
+
+//////////
+// SPI2 //
+//////////
+
+// pin configuration for SPI2
+// port for SCK pin is: SPI2_SCLK
+// port for MISO pin is: SPI2_MISO
+// port for MOSI pin is: SPI2_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOB, 13, GPIOB, 14, GPIOB, 15, 5)

CMSIS-OS/ChibiOS/ST_NUCLEO144_F412ZG_NF/nanoCLR/mcuconf.h

@@ -258,10 +258,10 @@
  * SPI driver system settings.
  */
 #define STM32_SPI_USE_SPI1                  TRUE
-#define STM32_SPI_USE_SPI2                  TRUE
-#define STM32_SPI_USE_SPI3                  TRUE
-#define STM32_SPI_USE_SPI4                  TRUE
-#define STM32_SPI_USE_SPI5                  TRUE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_USE_SPI4                  FALSE
+#define STM32_SPI_USE_SPI5                  FALSE
 #define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
 #define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
 #define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)

CMSIS-OS/ChibiOS/ST_NUCLEO144_F412ZG_NF/target_windows_devices_spi_config.cpp

@@ -3,8 +3,16 @@
 // See LICENSE file in the project root for full license information.
 //
 
-#include "win_dev_spi_native.h"
+#include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI1 //
+//////////
+
+// pin configuration for SPI1
+// port for SCK pin is: SPI1_SCLK
+// port for MISO pin is: SPI1_MISO
+// port for MOSI pin is: SPI1_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOA, 5, GPIOA, 6, GPIOA, 7, 5)

CMSIS-OS/ChibiOS/ST_NUCLEO144_F439ZI/nanoCLR/mcuconf.h

@@ -259,9 +259,9 @@
  * SPI driver system settings.
  */
 #define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  TRUE
-#define STM32_SPI_USE_SPI3                  TRUE
-#define STM32_SPI_USE_SPI4                  TRUE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_USE_SPI4                  FALSE
 #define STM32_SPI_USE_SPI5                  TRUE
 #define STM32_SPI_USE_SPI6                  FALSE
 #define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)

CMSIS-OS/ChibiOS/ST_NUCLEO144_F439ZI/target_windows_devices_spi_config.cpp

@@ -5,6 +5,14 @@
 
 #include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI5 //
+//////////
+
+// pin configuration for SPI5
+// port for SCK pin is: SPI5_SCK
+// port for MISO pin is: SPI5_MISO
+// port for MOSI pin is: SPI5_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOF, 7, GPIOF, 8, GPIOF, 9, 5)

CMSIS-OS/ChibiOS/ST_NUCLEO144_F746ZG/nanoCLR/mcuconf.h

@@ -280,9 +280,9 @@
  * SPI driver system settings.
  */
 #define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  TRUE
-#define STM32_SPI_USE_SPI3                  TRUE
-#define STM32_SPI_USE_SPI4                  TRUE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_USE_SPI4                  FALSE
 #define STM32_SPI_USE_SPI5                  TRUE
 #define STM32_SPI_USE_SPI6                  FALSE
 #define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)

CMSIS-OS/ChibiOS/ST_NUCLEO144_F746ZG/target_windows_devices_spi_config.cpp

@@ -5,6 +5,14 @@
 
 #include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI5 //
+//////////
+
+// pin configuration for SPI5
+// port for SCK pin is: SPI5_SCK
+// port for MISO pin is: SPI5_MISO
+// port for MOSI pin is: SPI5_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOF, 7, GPIOF, 8, GPIOF, 9, 5)

CMSIS-OS/ChibiOS/ST_NUCLEO64_F401RE_NF/target_windows_devices_spi_config.cpp

@@ -3,8 +3,28 @@
 // See LICENSE file in the project root for full license information.
 //
 
-#include "win_dev_spi_native.h"
+#include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI2 //
+//////////
+
+// pin configuration for SPI2
+// port for SCK pin is: SPI2_SCLK
+// port for MISO pin is: SPI2_MISO
+// port for MOSI pin is: SPI2_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOB, 13, GPIOB, 14, GPIOB, 15, 5)
+
+//////////
+// SPI3 //
+//////////
+
+// pin configuration for SPI3
+// port for SCK pin is: SPI3_SCLK
+// port for MISO pin is: SPI3_MISO
+// port for MOSI pin is: SPI3_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOC, 10, GPIOC, 11, GPIOC, 12, 5)

CMSIS-OS/ChibiOS/ST_NUCLEO64_F411RE_NF/target_windows_devices_spi_config.cpp

@@ -5,6 +5,26 @@
 
 #include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI2 //
+//////////
+
+// pin configuration for SPI2
+// port for SCK pin is: SPI2_SCLK
+// port for MISO pin is: SPI2_MISO
+// port for MOSI pin is: SPI2_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOB, 13, GPIOB, 14, GPIOB, 15, 5)
+
+//////////
+// SPI3 //
+//////////
+
+// pin configuration for SPI3
+// port for SCK pin is: SPI3_SCLK
+// port for MISO pin is: SPI3_MISO
+// port for MOSI pin is: SPI3_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(3, GPIOC, 10, GPIOC, 11, GPIOC, 12, 5)

CMSIS-OS/ChibiOS/ST_STM32F411_DISCOVERY/target_windows_devices_spi_config.cpp

@@ -5,6 +5,26 @@
 
 #include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI1 //
+//////////
+
+// pin configuration for SPI1
+// port for SCK pin is: SPI1_SCLK
+// port for MISO pin is: SPI1_MISO
+// port for MOSI pin is: SPI1_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOA, 5, GPIOA, 6, GPIOA, 7, 5)
+
+//////////
+// SPI2 //
+//////////
+
+// pin configuration for SPI2
+// port for SCK pin is: SPI2_SCLK
+// port for MISO pin is: SPI2_MISO
+// port for MOSI pin is: SPI2_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOB, 13, GPIOB, 14, GPIOB, 15, 5)

CMSIS-OS/ChibiOS/ST_STM32F4_DISCOVERY/target_windows_devices_spi_config.cpp

@@ -3,8 +3,16 @@
 // See LICENSE file in the project root for full license information.
 //
 
-#include "win_dev_spi_native.h"
+#include "win_dev_spi_native_target.h"
 
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// THIS FILE IS BLANK ON PURPOSE BECAUSE THIS TARGET DOESN'T REQUIRE THIS SPECIFIC CONFIGURATION //
-///////////////////////////////////////////////////////////////////////////////////////////////////
+//////////
+// SPI1 //
+//////////
+
+// pin configuration for SPI1
+// port for SCK pin is: SPI1_SCLK
+// port for MISO pin is: SPI1_MISO
+// port for MOSI pin is: SPI1_MOSI
+
+// GPIO alternate pin function is 5 (see alternate function mapping table in device datasheet)
+SPI_CONFIG_PINS(2, GPIOA, 5, GPIOA, 6, GPIOA, 7, 5)