* Move much of ErrorHandler.cs into a partial class in ErrorHandler.tools.cs,
which is referenced by mtouch and mmp (but not our runtime).
* Add ErrorHandler.runtime.cs for runtime-specific bits, including a simpler
version of ErrorHandler.Show. In particular this gets rid of the call to
Environment.Exit, which should never happen at runtime.
* Rename MonoTouchException and MonoMacException to ProductException, which
allows us to remove a lot of ifdefs.
* This required moving Application.LoadSymbols and Target.LoadSymbols to
shared mtouch/mmp code.
The native methods xamarin_get_[generic_]method_from_token are a bit unusual
in that they return an actual GCHandle. This is for performance reasons, since
in some cases their return value is passed as parameters to other function
calls to managed code, in which case we need the GCHandle. This way we avoid
round-tripping a GCHandle multiple times.
This optimization can be enabled when it's not possible to use the
managed linker (e.g. **Don't link**) or when the managed linker cannot
remove references to deprecated types that would cause an application
to be rejected by Apple.
References to the existing types will be renamed, e.g. `UIWebView` to
`DeprecatedWebView`, in every assemblies.
The type definition is also renamed (for validity) and all custom
attributes on the types and their members will be removed.
Code inside the members will be replaced with a
`throw new NotSupportedException ();`.
The msbuild test app `MyReleaseBuild` has been updated to test that the
optimization is working as expected (device builds are slow so reusing
this test has little impact in test time).
Basically the test ensure that `UIWebView` is used and cannot be removed
by the compiler (optimization) or the managed linker (since it's
referenced). Since the optimization is enabled then we can `grep` then
final `.app` directory to ensure there's no mention of `UIWebView` inside
any of the files that would be submitted.
The application can be run, by itself, and will turn green if OK, red if
`DeprecatedWebView` can't be found (skeleton replacement for `UIWebView`)
or orange if a `NotSupportedException` is thrown.
Finally introspection tests have been updated to skip over the deprecated
(and renamed) types. It should not be an issue right now, since this
optimization is not enabled by default, but it made testing easier.
* [registrar] Fixes NSString trampoline code generation in static registrar
Fixesxamarin/xamarin-macios#7733
This was introduced as a side effect of commit 8425129, we
used to generate `id foo` instead of the full block signature
in the trampoline code used by the static registrar, this is
the reason we never caught this condition before.
Added registrar test.
* Move tests to the appropiate test file
* Add bindings for NSXpcConnection and related types
* Re-add accidentally deleted file
* Typo fix
* Add NSXpcInterface.CreateForType()
* Add MethodInfo-taking overloads to NSXpcInterface
* Add null check
* Mark methods with wrappers as internal
Also fixed a formatting bug that I didn't catch earlier.
* Change NSXPCProxyCreating methods to be strongly typed
I got rid of the NSXpcProxyCreating interface in this change,
because its only user was NSXpcConnection, and I needed to
inline the protocol methods into the class definition so I
could mark them as [Internal].
* Add missing casts
* Add NSXpcConnectionOptions enum
* Convert NSXpcConnection constructor to use new enum
* Remove now-unneeded manual constructor
* Fix bgen warning
* Typo fix
* Fix selector
* Remove incorrect use of BindAsAttribute
Per the docs, this only works for enums backed
by NSNumber and NSValue, not for enums
passed directly as integers.
* Fix duplicated selector errors
* Throw ArgumentException instead of InvalidOperationException
* Extend AppExtension targets to produce XPC services
Rather than create an entirely new set of targets
(that would require VS and VSMac updates to properly
consume), I have decided to use the existing AppExtension
build targets to produce XPC services as well. All the
user must do is set the $(IsXPCService) property to true in
their project file, and the targets will do The Right Thing™.
Note that this support is Mac-only for now; I may need a bit
of help adjusting them to work on for iOS/watchOS/tvOS, as I
am not as familiar with those platforms.
* Copy XPC service bundles into the correct location
* Move IsXPCService property definition to props file
* Don't pass /extension to mmp for XPC service targets
This would cause the XPC service binary to
be linked incorrectly.
* Add NSXpcConnection/NSXpcInterface.cs files to the build
* Fix build
* Fix build
* Add required type parameter requirements
* Fix type parameter requirements
* Fix return type
* Fix return type of NSXpcInterface.CreateForProtocol ()
* Take ownership of the returned object types
* Adjust XPC service mmp invocation
I need to link the XPC service bundle as if it is an app extension, but
I must not use xamarin_mac_extension_main. I added a new flag to make
this possible.
* Change mmp to correctly construct XPC service bundle
* Set the MonoBundleExecutable Info.plist key for XPC services
* Use the runtime to get the protocol
* Make NSXpcInterface.CreateForProtocol() public
The static registrar must be used for Cocoa to accept the protocol
as a valid XPC interface, but that then seems to break resolving
the protocol from the type. I must therefore hard-code the protocol
name in my code, and that requires I make this constructor public.
* Add XpcInterfaceAttribute
See the doc comment in XpcInterfaceAttribute.cs for why
this type is required. The referenced mmp optimizations
will be added in future commits.
* Add XpcInterfaceAttribute to generator build
* Add support for XpcInterfaceAttribute to the generator
* Force static generation of protocols decorated with XpcInterfaceAttribute
* Change how static registrar translates block parameters
Previously, they would always be marshalled as "id".
This would throw off the XPC subsystem, which parses
the block signature to determine the communication
protocol.
* Undo whitespace noise
* Remove unneeded casts
* Add trailing comma
* Use HasAttribute instead of GetCustomAttribute
* Fix style issues
* Bind NSXpcConnection.auditSessionIdentifier
* Address naming feedback
* Make Get/SetAllowedClasses public
IMHO, passing the selector as a string is just as
usable as passing a MethodInfo, and is also less
verbose if you copy/paste the selector string
from the ExportAttribute. There is no reason why
we cannot have both overloads be public.
* Update overload names to match
* Update more overload names to match
* Make mmp --xpc imply --extension
* Reformat if statement
* Fix build
* Conditionalize creation of PlugIns and XPCServices directories
* Add AutoGeneratedName
Co-Authored-By: Rolf Bjarne Kvinge <rolf@xamarin.com>
* Get rid of ProtocolizeAttribute
* Update availability attributes to please xharness
I actually think xharness is wrong here, since the
NSXPCConnection header lists these types as being
available starting in macOS 10.8.
* Update sharpie ignore files to reflect changes
This should fix the xtro-sharpie test failures CI has been reporting.
* Fix MM4105 error generation
* Adjust error message in test to match mmp
I had to change the error text slightly, because the type of the parameter
cannot be determined where the error is thrown anymore. However, the newer
exception message IMO is just as clear.
* Make exception message match test exactly
* Remove outdated copyright header text
* Remove more outdated copyright header text
* Revert changes to MM4105 error generation
I have a more elegant way of fixing this test now.
* Return "id" if Invoke method cannot be found
This fixes the MM4105 error unit test,
without requiring modification to that test.
* Remove redundant availability attributes
* Add DesignatedInitializerAttribute
* Re-add required code to macOS-Foundation.ignore
* Put DesignatedInitializer on the right constructor
* Update xtro-sharpie ignore files
Apple decided to expose most (but not all) `CIFilter` using protocols
(instead of weakly named dictionaries). Most of this maps well with
our strong bindings but there are cases where we:
* missing some properties (easy, there were added); or
* used a different types [1] and that requires new members / obsoletion
A few other API were also added in Xcode 11 (nothing in 11.1 or 11.2) and
included in this PR.
New introspection tests were also added to minimize the risk that
the API and generator changes produced incorrect code. This lead
to the finding of some missing API (in particular `Output*` properties)
that were added.
[1] Often ours are better (using `float` for a `bool` value is not
optimal) but we do not have `[BindAs]` for protocols :( to _fix_ them
Note: this replace draft PR https://github.com/xamarin/xamarin-macios/pull/7120 but it's has quite a bit of changes in filter generation (inlining protocols) and that affected bindings too.
Several functions were 100% identical except for their signature. However
the signature were over-specialized and simplifying them allows the
(already) present code merge feature to achieve much better results.
Final size impact will vary based on the API used (both the managed and
native linker can remove some) but the more API you use the more likely
the application included duplicate code.
**Before**
`tools/mtouch/Xamarin.iOS.registrar.ios.x86_64.m` has `native_to_managed_trampoline_[1..379]`
```
find tools/ -name Xamarin.*.a | xargs ls -l
-rw-r--r-- 1 poupou staff 4143148 11 Oct 15:09 tools//mmp/Xamarin.Mac.registrar.full.a
-rw-r--r-- 1 poupou staff 4139052 11 Oct 15:09 tools//mmp/Xamarin.Mac.registrar.full.x86_64.a
-rw-r--r-- 1 poupou staff 4143160 11 Oct 15:09 tools//mmp/Xamarin.Mac.registrar.mobile.a
-rw-r--r-- 1 poupou staff 4139064 11 Oct 15:09 tools//mmp/Xamarin.Mac.registrar.mobile.x86_64.a
-rw-r--r-- 1 poupou staff 4521752 11 Oct 15:09 tools//mtouch/Xamarin.iOS.registrar.ios.i386.a
-rw-r--r-- 1 poupou staff 9240416 11 Oct 15:09 tools//mtouch/Xamarin.iOS.registrar.ios.simulator.a
-rw-r--r-- 1 poupou staff 4714336 11 Oct 15:09 tools//mtouch/Xamarin.iOS.registrar.ios.x86_64.a
```
**After**
`tools/mtouch/Xamarin.iOS.registrar.ios.x86_64.m` has `native_to_managed_trampoline_[1..132]`
```
find tools/ -name Xamarin.*.a | xargs ls -l
-rw-r--r-- 1 poupou staff 3723012 11 Oct 14:57 tools//mmp/Xamarin.Mac.registrar.full.a
-rw-r--r-- 1 poupou staff 3718916 11 Oct 14:57 tools//mmp/Xamarin.Mac.registrar.full.x86_64.a
-rw-r--r-- 1 poupou staff 3723016 11 Oct 14:57 tools//mmp/Xamarin.Mac.registrar.mobile.a
-rw-r--r-- 1 poupou staff 3718920 11 Oct 14:57 tools//mmp/Xamarin.Mac.registrar.mobile.x86_64.a
-rw-r--r-- 1 poupou staff 3995520 11 Oct 14:57 tools//mtouch/Xamarin.iOS.registrar.ios.i386.a
-rw-r--r-- 1 poupou staff 8195748 11 Oct 14:57 tools//mtouch/Xamarin.iOS.registrar.ios.simulator.a
-rw-r--r-- 1 poupou staff 4193956 11 Oct 14:57 tools//mtouch/Xamarin.iOS.registrar.ios.x86_64.a
```
* [registrar] Report a warning when the registrar export an abstract INativeObject type to Objective-C.
Exporting abstract types to Objective-C can lead to problems when at runtime
we're asked to create an instance of such a type (which we can't), so warn
when this happens.
This would have caught #6655, and the problems explained in #4969 as well.
Since this may trigger for code that's currently working fine, I'm making it a
warning instead of an error (which means adding some extra code to be able to
easily report warnings from the generator code).
* Don't assume a TypeReference can be successfully resolved every time.
Included changes are:
* New Cecil API in 2019-08
* Permit new symbols from networkable AOT profiler in symbols test
* Bump Mono to include fix for zlib linking, and new Cecil API
* We need to link against zlib now, if using libmono.a
* [Tests] Ignore memory hungry tests in old devices. (#6913)
* Ignore certain tests that use too many resources in old devices.
* Add missing tests that use too much memory on 32b devices.
* Build native code with -std=c++14.
Apple's headers now require -std=c++14 to compile their headers in C++ mode.
This fixes a compile error that would occur with the PhotosUI framework when
compiling code for C++.
* [mmp] Use -std=c++14 when compiling.
* Fix command line output.
* [mmp] Add all source files at the end, so they all get the -x clang argument applied.
* Limit when using c++14 in mtouch according to language.
* [WatchKit] Remove this framework for iOS while keeping backwards compatibility. Fixes#6492.
* Copy all generated sources and modify them to throw PlatformNotSupported exceptions.
* Adjust some existing source code to also throw PlatformNotSupported exceptions.
* Sprinkle Obsolete attributes generously.
* Stop generating code for the WatchKit framework for iOS.
Fixes https://github.com/xamarin/xamarin-macios/issues/6492.
* [introspection] Adjust test.
* [mtouch] Don't link with WatchKit, and show a warning if we detect code that want to use WatchKit.
* [xtro] Remove WatchKit for iOS.
* [introspection] Don't check obsoleted NSString fields for null.
There's probably a reason the field was obsoleted.
* [introspection] Add exception for the WatchKit framework.
* [xtro] Ignore obsolete enums.
There's probably a reason they're obsoleted.
In particular it solves a confusion between WKWebKit.WKErrorCode and
WatchKit.WKErrorCode: for iOS, the latter is obsoleted, and this way we always
process the former instead.
* [mtouch] Adjust wording for MT4178 to be more accurate.
* [WatchKit] Make more API obsolete/hidden.
Two classes managed to slip past the first time.
* [tests] Adjust test after WatchKit removal.
* The Photos headers are broken when building in C++ mode.
* The PhotosUI headers include the Photos header, so those don't work either.
* The WatchKit framework just isn't there at all.
* [runtime] Add an inner exception parameter to Runtime.CreateProductException.
This allows us to simplify code by using inner (and outer) exceptions as
a means to provide information instead of passing extra information
around in order to create decent exceptions.
One example is how we pass the selector and method name to the method
that converts from a native id to a managed NSObject instance: passing
this information is not necessary anymore if we can use two exceptions,
one for the failure to convert from an id to a NSObject instance,
wrapped in a second that tells which method/selector call ran into this
conversion problem.
* [runtime] Throw better exceptions when the dynamic registrar can't marshal something.
* [runtime] Throw a better exception when something goes wrong when trying to marshal a return value.
* [runtime] Use inner exceptions to convey failure information instead of trying to create a single exception with all we know.
* Fix merge problem.
* [registrar] Make a copy of the static registrar for Xamarin.Mac/Classic.
Make a copy of the static registrar for Xamarin.Mac/Classic, one which is
compatible with the binary artifacts we ship for Xamarin.Mac/Classic
(libxammac, XamMac.dll).
This way the static registrar can evolve in the future, without breaking
Xamarin.Mac/Classic.
* [runtime] Make a copy of the runtime headers too.
* Update comment.
* [mmp] Delay creating a Target instance until we know if we're a Classic or Unified app.
Otherwise the wrong static registrar might be created.
* [Foundation] Add an NSArray.FromNSObjects overload that can take an array of INativeObjects.
* [runtime] Use mono_array_setref instead of mono_array_set.
Otherwise the GC won't know about the assignment, and the assigned value can
be freed if it's no longer referenced anywhere else.
objc_msgSend*_stret doesn't exist on arm64, so trying to call these functions
in our generated P/Invoke wrappers will result in a clang error:
[...]/pinvokes.m:180:69: error: 'objc_msgSend_stret' is unavailable: not available in arm64 (TaskId:243)
So instead generate a call to throw an EntryPointNotFoundException (which is
exactly what would happen if we didn't generate the P/Invoke wrapper).
Fixes https://github.com/xamarin/xamarin-macios/issues/5183.
Rolf Bjarne Kvinge
Sebastien Pouliot
Waleed Chaudhry
Alex Soto
Manuel de la Pena
Vincent Dondain
William Kent
Bernhard Urban
Jo Shields
monojenkins