This also centralize other interpreter checks and options in the same
location (making it easier to read / update).
* Warn and switch the REPL if the interpreter is enabled on simulator
Why ? It's confusing to build the same code using different options for
simulator and devices. This is what happens if you try to use features
like `dynamic` or `System.Reflection.Emit`.
So instead of an error, we warn that the interpreter is not supported
and switch to the existing REPL mode.
The JIT remains the only option for the simulator but it allows testing
features without a device.
* Fail early if the interpreter is used on 32bits [1]
The current interpreter only works on 64 bits (so ARM64). However the
error won't be reported, back to the developer, until deployment time.
This temporary [1] fix spot the condition very early and report an error
```
error MT0099 : Internal error : The interpreter is currently only available for 64 bits.
```
instead of the current one at deploy time
```
IncorrectArchitecture: Failed to find matching arch for 32-bit Mach-O input file /private/var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.tNKDlx/extracted/X.app/X
error MT1006: Could not install the application 'X.app' on the device 'Mercure': AMDeviceSecureInstallApplicationBundle returned: 0xe8000087 (kAMDIncorrectArchitectureError).
Application could not be uploaded to the device.
```
[1] https://github.com/mono/mono/issues/9871
* [tests] Fix/renumbered MT0138
The test was using simulator + interpreter which is not _really_
possible, we use REPL in that case - so we're now checking if
assemblies were specified with `--interpreter` to cover both cases.
Also 0138 was already used by `mmp` and the warning was **not**
registered or documented in the errors documents. To avoid
confusion it has been renumbered to 0142 and documented.
The Mono AOT compiler maintains a set of signatures of compiled methods.
Those signatures are necessary to emit wrappers to enable the transition
from interpreter->AOT code. Thus, they must be collected for each
assembly.
The AOT compiler uses the 'outfile' as the base for a temporary .bc file. If
it's not set, the path to the assembly is used as the base instead. This does
not work if we compile the same assembly to multiple architectures (for
instance armv7k+arm64_32), because the temporary file will clash between those
AOT compilations.
This is not a problem for iOS (armv7+armv7s) because we don't compile to
bitcode (.bc files) on iOS.
Also change output to use the full path to files as nodes, instead of just the
filename, and instead use a label to set what's shown to just the filename.
This makes the graph correct when we have multiple files with the same name,
but different paths.
Sometimes we just Log a string without any format arguments. This works fine,
until the string comes from the user, and happen to contain braces, in which
case an invalid format exception is thrown.
Adding Log overloads that doesn't take format arguments (nor formats its
input) avoids this problem.
Share all the code to find and verify Xcode between mtouch and mmp.
Also print out the actual product version when logging which Xcode was used
(to make it easier to detect if a beta version is in use).
* Bump to mono:2018-06
* Bump mono
* Updates compression to work with the public span
* Bump mono
* Fixes pointer check logic in Deflater
* Bump mono
* Fixes pointer check logic in Deflater
* Bump mono
* Bump Mono
* [runtime] always use `mono_jit_set_aot_mode` (#4491)
`mono_jit_set_aot_only` is deprecated and accidentally broke with
https://github.com/mono/mono/pull/7887
This should fix device tests with `mono-2018-06`
* Testing with Zoltan's patch
* Include libmono-system-native on Xamarin.Mac
* Bump Mono
Commit list for mono/mono:
* mono/mono@7bcda192a0 Bump llvm to release_60/fc854b8ec5873d294b80afa3e6cf6a88c5c48886. (#9786). (#9804)
* mono/mono@23e95ec7ad Apply F# portable pdb debug fix for pinvokes & bump (#9797)
* mono/mono@295f6d32af [2018-06] [MacOS] On Mac, use the copyfile API to copy files (#9696)
Diff: 7d5f4b6136...7bcda192a0
* Revert 4bacab3d5c, it doesn't fix the ios aot problems.
* Bump mono
* [tests] Adjust the MT0137 test for mcs change in behavior.
Starting with mono 5.16 mcs will now add assembly references when the assembly
is only used in attributes (this was already the case for csc in both 5.14 and
5.16, so it seems to be a compatibility change).
Adjust the MT0137 test accordingly.
* [msbuild] Fix parsing of json parser errors to handle trailing periods in the error message.
Fixes this test:
1) Test Failure : Xamarin.iOS.Tasks.Bug60536.TestACToolTaskCatchesJsonException
ColumnNumber
Expected: 2
But was: 0
* Bump mono
* [builds] Install the old llvm binaries into the LLVM36 directory and make the 32 bit builds use that.
* Bump mono
* Bump mono
* [jenkins] Don't give VSTS a fake branch. (#4667)
Something in VSTS changed, and now fake branch names don't work anymore.
So instead use real branch names (and for pull requests I've created a
'pull-request' branch we can use).
* Assembly.LoadFile accepts only absolute path
* [linker] Add new Facade (System.Threading.Tasks.Extensions).
Fixes these MTouch test failures:
1. Xamarin.Linker.SdkTest.iOS_Unified : Facades
Expected:
But was: < "System.Threading.Tasks.Extensions" >
2. Xamarin.Linker.SdkTest.tvOS : Facades
Expected:
But was: < "System.Threading.Tasks.Extensions" >
3. Xamarin.Linker.SdkTest.watchOS : Facades
Expected:
But was: < "System.Threading.Tasks.Extensions" >
* [mono-sdks] Necessary changes to unify the LLVM provisioning for both iOS and Android. (#4732)
* Bump Mono
* [mtouch] add mixed-mode support (#4751)
* [mtouch] add --interp-mixed option
When enabling this option, mtouch will AOT compile `mscorlib.dll`. At
runtime that means every method that wasn't AOT'd will be executed by
the runtime interpreter.
* [mtouch] Add support to --interpreter to list the assemblies to (not) interpret.
* [msbuild] Simplify interpreter code to use a single variable.
* Fix whitespace.
* [mtouch] Move mtouch-specific code to mtouch-specific file.
* [msbuild] An empty string is a valid value for 'Interpreter', so make it a non-required property.
* [mtouch] Add sanity check for aot-compiling interpreted assemblies.
* Bump Mono
* [linker] Updates SDKs facades list
* Bump mono
* [msbuild] Adds facades which might override default nuget version to framework list
The collision resolver task reads them from here https://github.com/dotnet/sdk/blob/master/src/Tasks/Common/ConflictResolution/FrameworkListReader.cs
* Bump to a VSfM version that can build XM Classic projects.
Unify the code to detect frameworks that aren't supported in the simulator (we
had switches in two places, now this data is stored per framework).
Also remove some of the Metal frameworks for some of the platforms from these
lists (since they're now available in the simulator in some cases), which
fixes#4422.
It also seems CoreAudioKit is now available in the simulator (it wasn't in the
first Xcode 7 beta, but apparently added in a later beta. This made our
exclusion incorrect, but we never noticed).
https://github.com/xamarin/xamarin-macios/issues/4422
* Bump to use Xcode 10 beta 1
* Update Versions.plist
* Add a dependency on Xcode 9.4.
* [msbuild] Fix build with Xcode 10 beta 1. (#4182)
Many years ago (in Xcode 7 according to code comment)
Developer/Platforms/iPhoneOS.platform/Developer/usr disappeared, and we coped
by looking at Developer/usr instead (and also the subsequent code to locate
the bin directory was based on the location of the usr directory).
Developer/Platforms/iPhoneOS.platform/Developer/usr reappeared in Xcode 10
beta 1, but it seems useless (for one it doesn't contain a bin directory), so
in order to try to keep things sane don't look for this directory in Xcode 10
and instead go directly for Developer/usr (which is what we've been using as
the usr directory for years anyway).
Fixes this problem when building apps with Xcode 10 beta 1:
/Library/Frameworks/Mono.framework/External/xbuild/Xamarin/iOS/Xamarin.iOS.Common.targets(626,3): error : Could not locate SDK bin directory [/Users/rolf/Projects/TestApp/test-app.csproj]
* [runtime] Build 32-bit mac executables using Xcode 9.4.
* [mtouch] Work around broken tvOS headers in Xcode 10 beta 1.
* [mtouch] Work around build problem with Apple's simd headers in Objective-C++ mode.
* Use version-agnostic paths to sdk directories.
* [tests][xtro] Add todo files (from unclassified) and adjust ignore files to avoid errors
* [macos][security] Re-enable SSL[Get|Set]AlpnProtocols. Fixes#4001 (#4022)
* [macos][security] Re-enable SSL[Get}Set]AlpnProtocols. Fixes#4001
This was fixed in macOS 10.13.4
https://github.com/xamarin/xamarin-macios/issues/4001
* [tests][monotouch-tests] Disable a few test cases (one crasher, other failures). Causes to be verified later
* [xharness] Fix permission dialog suppression in Xcode 10.
* [xharness] Ignore 32-bit macOS tests by default.
* [tests] Execute mmp regression tests with Xcode 9.4 since many of them are 32-bit and needs porting to 64-bit.
* [mmptest] Ignore 32-bit XM tests if we don't have a 32-bit-capable Xcode.
* [registrar] Add workaround for broken headers in Xcode 10 beta 1 (radar 40824697).
* [mtouch] Restrict another workaround for an Xcode 10 beta 1 bug to a specific Xcode version to remove it asap.
* [tests] Fix some protocol changes (public or not) find by introspection tests
* [tests][intro] Fix DefaultCtorAllowed failures
* [Intents] Obsolete several Intents classes in watchOS.
Several existing Intents classes have been marked as unavailable in watchOS in
the headers in Xcode 10 beta 1, and corresponding tests are now failing.
So obsolete the managed wrapper types, and fix tests accordingly.
* Fix xtro wrt previous Ietents/intro changes
* [tests] Minor adjustments to mtouch tests to work with Xcode 10.
* [msbuild] Update tests to cope with additional files produced by the Core ML compiler.
* [msbuild] Xcode 10 doesn't support building watchOS 1 apps, so show a clear error message explaining it.
Also update tests accordingly.
* [coreimage] Stub new filters and exclude ?removed? ones from tests
* Update GameplayKit and SpriteKit NSSecureCoding _upgrade_ and fix other non-public cases (in tests)
* [tests] Ignore some GameKit selectors that don't respond anymore (but seems to be available, at least in header files)
* [tests] Fix intro 32bits testing for filters resutls
* [msbuild] Slightly change error message to be better English.
* Share the stopwatch code between `mtouch` and `mmp`;
* Add more details on linker steps. Sadly substeps are executed on the
metadata so they can't be reported individually;
* Add a few places where timestamps where missing to get better precision
on the linking part;
* [runtime] build interp-, icalltable- and ilgen libraries so they can be consumed in interpreter configuration
* [mtouch] add --interpreter configuration support
* [xharness] Add support for removing defines from cloned project files.
* [xharness] Run monotouch-test, mscorlib and mini tests with the interpreter too.
They're ignored for now, which means we won't run them on the bots.
* [mtouch] We're using dlsym when using the interpreter.
* [xharness] enable mini regression tests with interpreter on CI
The --linker-optimize option is an early version of the current --optimize
option, and apparently I forgot to update everything when the option changed
name.
When code sharing is enabled, only the container app/target will have a
LinkContext.
So make sure the static registrar finds that link context when it needs
information from the linker.
https://github.com/xamarin/xamarin-macios/issues/3514
When code sharing is enabled, only the container app/target will have a
LinkContext.
So make sure the static registrar finds that link context when it needs
information from the linker.
https://github.com/xamarin/xamarin-macios/issues/3514
* [tests] Improve debug spew for the RebuildTest_WithExtensions test.
* [mtouch/mmp] Store/load if the dynamic registrar is removed or not into the cached link results.
Store/load if the dynamic registrar is removed or not into the cached link
results, so that we generate the correct main.m even if cached linker results
are used.
* [mtouch/mmp] The static registrar must not execute if we're loading cached results from the linker.
The static registrar must not execute if we're loading cached results from the
linker, because the static registrar needs information from the linker that's
not restored from the cache.
* [mtouch/mmp] Share Touch code.
* [mtouch/mmp] Make it possible to touch inexistent files (to create them).
* [mtouch/mmp] Fix tracking of whether the static registrar should run again or not.
The recent changes to support optimizing away the dynamic registrar caused the
Xamarin.MTouch.RebuildTest_WithExtensions test to regress.
The problem
-----------
* The linker now collects and stores information the static registrar needs.
* This information is not restored from disk when the linker realizes that it
can reload previously linked assemblies instead of executing again.
* The static registrar runs again (for another reason).
* The information the static registrar needs isn't available, and incorrect
output follows.
So fix 1: show an error if the static registrar runs when the linker loaded
cached results.
The exact scenario the test ran into is this:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk (this is an optimization to avoid
compiling the registrar.m file again unless needed).
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is newer than
registrar.m's timestamp and run again, but doesn't produce the right result
because it doesn't have the information it needs.
Considered solutions
--------------------
1. Only track timestamps, not file contents. This is not ideal, since it will
result in more work done: in particular for the case above, it would add a
registrar.m compilation in build #2, and linker rerun + static registrar
rerun + registrar.m compilation + final native link in build #3.
2. Always write the output of the static registrar, even if it hasn't changed.
This is not ideal either, since it will also result in more work done: for
the case above, it would add a registrar.m compilation + final native link
in build #3.
3. Always write the output of the static registrar, but track if it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it.
This only means the final native link in build #3 is added (see #5 for why
this is worse than it sounds).
4. Always write the output of the static registrar, but track it it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it,
and track that too, so that the final native link in build #3 isn't needed
anymore. Unfortunately this may result in incorrect behavior, because now
the msbuild tasks will detect that the executable has changed, and may run
dsymutil + strip again. The executable didn't actually change, which means
it would be the previously stripped executable, and thus we'd end up with
an empty .dSYM because we ran dsymtil on an already stripped executable.
5. Idea #4, but write the output of the final link into a temporary directory
instead of the .app, so that we could track whether we should update the
executable in the .app or not. This is not optimal either, because
executables can be *big* (I've seen multi-GB tvOS bitcode executables), and
extra copies of such files should not be taken lightly.
6. Idea #4, but tell the MSBuild tasks that dsymutil/strip doesn't need to be
rerun even if the timestamp of the executable changed. This might actually
work, but now the solution's become quite complex.
Implemented solution
--------------------
Use stamp files to detect whether a file is up-to-date or not.
In particular:
* When we don't write to a file because the new contents are identical to the
old contents, we now touch a .stamp file. This stamp file means "the
accompanying file was determined to be up-to-date when the stamp was
touched."
* When checking whether a file is up-to-date, also check for the presence of a
.stamp file, and if it exists, use the highest timestamp between the stamp
file and the actual file.
Now the test scenario becomes:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk, but it creates a registrar.m.stamp
file to indicate the point in time when registrar.m was considered up-to-
date.
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is *older* than
registrar.m.stamp's timestamp and doesn't run again.
We only use the stamp file for source code (registrar.[m|h], main.[m|h],
pinvokes.[m|h]), since using it every time has too much potential for running
into other problems (for instance we should never create .stamp files inside
the .app).
Fixes these test failures:
1) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single","",False,System.String[])
single
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory371/testApp.app/testApp is modified, timestamp: 2/15/2018 3:04:11 PM > 2/15/2018 3:04:09 PM" >
2) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("dual","armv7,arm64",False,System.String[])
dual
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory375/testApp.app/testApp is modified, timestamp: 2/15/2018 3:06:03 PM > 2/15/2018 3:06:00 PM" >
3) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("llvm","armv7+llvm",False,System.String[])
llvm
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory379/testApp.app/testApp is modified, timestamp: 2/15/2018 3:07:14 PM > 2/15/2018 3:07:12 PM" >
4) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("debug","",True,System.String[])
debug
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory383/testApp.app/testApp is modified, timestamp: 2/15/2018 3:08:16 PM > 2/15/2018 3:08:13 PM" >
5) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single-framework","",False,System.String[])
single-framework
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory387/testApp.app/testApp is modified, timestamp: 2/15/2018 3:09:18 PM > 2/15/2018 3:09:16 PM" >
Fixes https://github.com/xamarin/maccore/issues/641
* [tests] Improve debug spew for the RebuildTest_WithExtensions test.
* [mtouch/mmp] Store/load if the dynamic registrar is removed or not into the cached link results.
Store/load if the dynamic registrar is removed or not into the cached link
results, so that we generate the correct main.m even if cached linker results
are used.
* [mtouch/mmp] The static registrar must not execute if we're loading cached results from the linker.
The static registrar must not execute if we're loading cached results from the
linker, because the static registrar needs information from the linker that's
not restored from the cache.
* [mtouch/mmp] Share Touch code.
* [mtouch/mmp] Make it possible to touch inexistent files (to create them).
* [mtouch/mmp] Fix tracking of whether the static registrar should run again or not.
The recent changes to support optimizing away the dynamic registrar caused the
Xamarin.MTouch.RebuildTest_WithExtensions test to regress.
The problem
-----------
* The linker now collects and stores information the static registrar needs.
* This information is not restored from disk when the linker realizes that it
can reload previously linked assemblies instead of executing again.
* The static registrar runs again (for another reason).
* The information the static registrar needs isn't available, and incorrect
output follows.
So fix 1: show an error if the static registrar runs when the linker loaded
cached results.
The exact scenario the test ran into is this:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk (this is an optimization to avoid
compiling the registrar.m file again unless needed).
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is newer than
registrar.m's timestamp and run again, but doesn't produce the right result
because it doesn't have the information it needs.
Considered solutions
--------------------
1. Only track timestamps, not file contents. This is not ideal, since it will
result in more work done: in particular for the case above, it would add a
registrar.m compilation in build #2, and linker rerun + static registrar
rerun + registrar.m compilation + final native link in build #3.
2. Always write the output of the static registrar, even if it hasn't changed.
This is not ideal either, since it will also result in more work done: for
the case above, it would add a registrar.m compilation + final native link
in build #3.
3. Always write the output of the static registrar, but track if it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it.
This only means the final native link in build #3 is added (see #5 for why
this is worse than it sounds).
4. Always write the output of the static registrar, but track it it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it,
and track that too, so that the final native link in build #3 isn't needed
anymore. Unfortunately this may result in incorrect behavior, because now
the msbuild tasks will detect that the executable has changed, and may run
dsymutil + strip again. The executable didn't actually change, which means
it would be the previously stripped executable, and thus we'd end up with
an empty .dSYM because we ran dsymtil on an already stripped executable.
5. Idea #4, but write the output of the final link into a temporary directory
instead of the .app, so that we could track whether we should update the
executable in the .app or not. This is not optimal either, because
executables can be *big* (I've seen multi-GB tvOS bitcode executables), and
extra copies of such files should not be taken lightly.
6. Idea #4, but tell the MSBuild tasks that dsymutil/strip doesn't need to be
rerun even if the timestamp of the executable changed. This might actually
work, but now the solution's become quite complex.
Implemented solution
--------------------
Use stamp files to detect whether a file is up-to-date or not.
In particular:
* When we don't write to a file because the new contents are identical to the
old contents, we now touch a .stamp file. This stamp file means "the
accompanying file was determined to be up-to-date when the stamp was
touched."
* When checking whether a file is up-to-date, also check for the presence of a
.stamp file, and if it exists, use the highest timestamp between the stamp
file and the actual file.
Now the test scenario becomes:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk, but it creates a registrar.m.stamp
file to indicate the point in time when registrar.m was considered up-to-
date.
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is *older* than
registrar.m.stamp's timestamp and doesn't run again.
We only use the stamp file for source code (registrar.[m|h], main.[m|h],
pinvokes.[m|h]), since using it every time has too much potential for running
into other problems (for instance we should never create .stamp files inside
the .app).
Fixes these test failures:
1) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single","",False,System.String[])
single
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory371/testApp.app/testApp is modified, timestamp: 2/15/2018 3:04:11 PM > 2/15/2018 3:04:09 PM" >
2) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("dual","armv7,arm64",False,System.String[])
dual
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory375/testApp.app/testApp is modified, timestamp: 2/15/2018 3:06:03 PM > 2/15/2018 3:06:00 PM" >
3) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("llvm","armv7+llvm",False,System.String[])
llvm
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory379/testApp.app/testApp is modified, timestamp: 2/15/2018 3:07:14 PM > 2/15/2018 3:07:12 PM" >
4) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("debug","",True,System.String[])
debug
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory383/testApp.app/testApp is modified, timestamp: 2/15/2018 3:08:16 PM > 2/15/2018 3:08:13 PM" >
5) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single-framework","",False,System.String[])
single-framework
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory387/testApp.app/testApp is modified, timestamp: 2/15/2018 3:09:18 PM > 2/15/2018 3:09:16 PM" >
Fixes https://github.com/xamarin/maccore/issues/641
You were the preprocessor we wished C# had natively
Removing PMCS requires these changes:
* Remove XamCore from src/
* Remove XamCore from tools/
* Remove XamCore from runtime/
* nint/nuint enum conversion
* _compat_ enum conversion
* NSAction conversion
* Hand fix single API incorrectly converted by PMCS to unbreak compatibility
- Due to a bug in PMCS, the nuint was incorrectly converted in this API.
- However, as that ship as sailed, we must "fix" it until XAMCORE_4_0
* Update readme
* Bump macios-binaries
* [mtouch/mmp] Give users more control over optimizations, and share more code between mtouch and mmp.
1. Add an --optimize flag to mtouch/mmp that allows users to select which
optimizations to apply (or not). This makes it easier to add future
optimizations, and allow users to disable any optimization that causes
problems without having to disable many other features.
2. Share as much optimization code as possible between mtouch and mmp. This
immediately gives a benefit to mmp, which has three new optimizations only
mtouch had: NSObject.IsDirectBinding inlining, IntPtr.Size inlining and
dead code elimination.
This results in ~6kb of disk space saved for a linked Xamarin.Mac app:
* link sdk: [Debug][1], [Release][2]
* link all: [Debug][3], [Release][4]
Testing also verifies that monotouchtest ([Debug][5], [Release][6]) has not
changed size at all, which means that no default optimizations have changed
inadvertedly.
[1]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-sdk-mac--debug
[2]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-sdk-mac--release
[3]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-all-mac--debug
[4]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-all-mac--release
[5]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#monotouchtest-iphonedebug64
[6]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#monotouchtest-iphonerelease64
* [tools] Don't enable the IsDirectBinding optimization by default for Xamarin.Mac apps, it's not safe.
* Fix whitespace issues.
* [doc] Document optimizations.
* Officially support optimizations by adding them to the Versions.plist.
* [linker] Improve IntPtr.Size inliner + dead code eliminatior and add tests.
* Properly handle operands for the ldc_i4_s instruction (they're sbyte).
* Fix less-than condition to actually do a less-than comparison.
* Make sure to look up the bitness in the Target, not the Application, since
the Application's value will be incorrect when building fat apps (both
Is32Build and Is64Build will be true).
* Remove unnecessary checks for the IntPtr.Size inliner: this optimization
does not depend on other instructions than the IntPtr.get_Size call, so
remove the checks that verify surrounding instructions. This makes the
IntPtr.Size inliner kick in in more scenarios (such as the new tests).
* Add tests.
* [tests] Add mmp tests for optimizations.
* [tests] Fix XM optimization tests.
* [tests] Fix test build error.
The parsing done by `System.Version` does not accept a major-only string,
e.g. providing "11" would throw an exception.
Since people generally refer version as iOS 11 (and not iOS 11.0) this
is, at best, a nuisance. Xcode toolchain accept "11" as a valid string.
The first part of message was updated to show both the option name and
the (user provided) value.
The 2nd part remain the text of the .net exception message, i.e. what
`Version.Parse` tells you when it validates the string. Seeing the input
value should make it more obvious for other, incorrect version strings.
reference:
https://bugzilla.xamarin.com/show_bug.cgi?id=60280
* [mtouch/mmp/bgen] Add support for response files.
This is the first part of the fix for #56501.
https://bugzilla.xamarin.com/show_bug.cgi?id=56501
* [tests] Make sure no single argument starting with a '@' is passed to mtouch unless it's a response file.
--assembly-build-target takes arguments starting with '@', for instance:
--assembly-build-target @all=framework
which does not work anymore, because that's interpreted as a response file
(mtouch tries to read the file '@all=framework', which obviously doesn't
exist).
The fix is simple, don't put a space between the two arguments:
--assembly-build-target=@all=framework
* Add --root-assembly to mtouch/mmp and make the MSBuild tasks use this new option.
This makes it possible to pass root assemblies starting with `@` to mtouch/mmp
without getting mistaken for response files.
* [msbuild] Always use the command-line option that takes an equals or colon.
Always use the command-line option that takes an equals or colon instead of a
space.
Do either of these:
--foo=something
--foo:something
instead of this:
--foo something
so that `something` can start with an at (`@`) sign without being mistaken for
a response file.
* [msbuild] Fix tests according to recent task changes.
* Update the function name used to initialize libmono-profiler-log, its called mono_profiler_init_log () now.
* [builds] Pass --with-cross-offsets= to crosstv's configure.
* Bump mono to 2017-08.
* Bump mono to 2017-08.
* Force disable 'futimens' and 'utimensat' so that we build with Xcode 9.
This is also needed to build with Xcode 8.3 on High Sierra.
* Remove old AppleTls implementation.
* Bump mono.
* Bump mono to 2017-08.
* Bump mono to 2017-08
* Reenable link-keep-resources-2 test
- This reverts commit 76b759ef22.
- 2017-08 has linker fix
* Bump mono to 2017-10
* Revert "Bump mono to 2017-10"
This reverts commit bb7832724e.
* Bump system mono to 2017-10
* Bump embedded mono to 2017-10
* [runtime] reflect eglib move
9be68f8952
* bump mono
* [btouch] remove Security.Tls usage from test
* [mtouch tests] update the function name used to initialize libmono-profiler-log, its called mono_profiler_init_log () now.
see
ea4e4a9ef6
fixes:
```
1) Failed : Xamarin.MTouch.Profiling(tvOS)
_mono_profiler_startup_log
Expected: collection containing "_mono_profiler_startup_log"
But was: < "_mono_profiler_init_log" >
at Xamarin.MTouch.Profiling (Xamarin.Profile profile) [0x00106] in <511889694a624cc9a50e0e9b259b05c5>:0
2) Failed : Xamarin.MTouch.Profiling(watchOS)
_mono_profiler_startup_log
Expected: collection containing "_mono_profiler_startup_log"
But was: < "_xamarin_get_block_descriptor", "_mono_profiler_init_log" >
at Xamarin.MTouch.Profiling (Xamarin.Profile profile) [0x00106] in <511889694a624cc9a50e0e9b259b05c5>:0
```
* [mmptest] update log profiler options.
826558a4af
deprecated the dash prefix for the mlpd path.
`noallocs` or `nocalls` are not needed, neither of them are default anymore.
* [mmptest] fix link-keep-resources-2 test to cope with more corlib resources.
another corlib resource (mscorlib.xml) was added:
https://github.com/mono/mono/commit/11e95169e787#diff-2d1c64decd91d9a6e8842ab0f0e9438d
* Revert "[mmptest] fix link-keep-resources-2 test to cope with more corlib resources."
This reverts commit 350eb3c174.
* [XHarness] Add the Mono.Data.Tds tests.
* Address comments from rolf in the review.
* [mmp regresssion tests] bump mono linker, so mscorlib.xml gets stripped
the test was failing in that way:
> Executing link-keep-resources-2...
> [FAIL] i18n 4/2 data files present: charinfo.nlp, collation.core.bin, collation.tailoring.bin, mscorlib.xml
also update the output, because it's actually expected at least three
elements.
fixes: https://bugzilla.xamarin.com/show_bug.cgi?id=59277
* bump mono
fixes crash in tvOS: https://github.com/mono/mono/pull/5812
* bump mono for updated BCL tests
see https://github.com/mono/mono/pull/5820
* [mono] set 2017-10 branch in .gitmodules
* [macos] Fix guiunit error on clean builds by depending on correct copy (#2912)
* [macos] Fix guiunit error on clean builds by depending on correct copy
- From a clean build making a BCL test would error due to the non-mobile guiunit not being built
- This was because the Makefile-mac.inc target was incorrect
- This was because xharness assumed that non variation based targets were always Modern
- However, BCL tests are Full, not Modern
* Code review change
* Swap to var to reduce diff
* Revert changes in the paths for GuiUnit.
* [XHarness] Add the System.IO.Compression bcl tests. (#2918)
* [XHarness] Add the System.IO.Compression bcl tests.
* [XHarness] Add bcl tests for System.IO.Compression.FileSystem. (#2924)
* [XHarness] Add the System.IO.Compression bcl tests.
* Ensure that resources are correctly copied in the bundles.
* [XHarness] Add bcl tests for System.IO.Compression.FileSystem.
* As per review, make the Mac test app name match the tests that are ran.
* [XHarness] Add Mono.CSharp tests on ios. (#2927)
* [XHarness] Add Mono.CSharp tests on ios.
* Bump mono to bring changes in the mono.csharp tests.
* [xtro-sharpie] fix TypeDefinition access due to Cecil change
* Bump mono
* bump mono
fixes
- https://bugzilla.xamarin.com/show_bug.cgi?id=60480
- https://bugzilla.xamarin.com/show_bug.cgi?id=60482
* bump mono
more fixes around conflicting paths when tests are run in parallel.
* Bump for mono/mono@2017-10
* [mtouch/mmp] Set CultureInfo.CurrentCulture according to LANG.
This makes it easier to run mtouch/mmp under different locales when testing.
Unfortunately mono checks the system locale before checking LANG, which means
that there's no built-in way in macOS/mono to specify the current locale
without changing the system locale.
* [mtouch] Print verbosity using an invariant culture. Fixes#58849.
https://bugzilla.xamarin.com/show_bug.cgi?id=58849
* [mtouch/mmp] Fix error code.
* [mtouch/mmp] Log/warn when we set the current language.
This change introduces the export of create_classes methods as objc compatible, without enforcing Objective-C++ as the development language for custom registrar embedders by moving the stringbuilder flushing inside the extern "C" block.
Mark the generated linking code as extern "C" too and also change the return type of xamarin_create_classes_Xamarin_Mac to void in mmp generation, as it was mistakenly set to int.
The AVFoundation framework's headers used to be broken in the simulator SDK
([1], [2]) until watchOS 3.2 (Xcode 8.3) fixed it. This means it's now safe to
use AVFoundation.
Additionally set the initial SDK version where this framework was introduced
to 3.2 for simulator builds, which means that if customers try to use it (with
an old Xcode), they will get a nice-ish error:
> MTOUCH : error MT4134: Your application is using the 'AVFoundation' framework, which isn't included in the watchOS SDK you're using to build your app (this framework was introduced in watchOS 3.2, while you're building with the watchOS 3.1 SDK.) Please select a newer SDK in your app's watchOS Build options.
instead of an ugly:
> MTOUCH : error MT4109: Failed to compile the generated registrar code. Please file a bug report at http://bugzilla.xamarin.com
the error message is slightly incorrect (the problem is only with the
simulator SDK, not the device SDK), but this should happen very rarely (it
only occurs if all of the following are true: using AVFoundation + in a
simulator build * the static registrar manually selected), so IMHO a more
accurate error description isn't worth it.
https://bugzilla.xamarin.com/show_bug.cgi?id=56862
[1] 7149661251
[2] https://openradar.appspot.com/29131674
* [runtime] Fix Xamarin-debug.framework's install name.
This makes building to frameworks work in debug mode.
* [mtouch] Fix check to add frameworks to watchKit extensions.
* [mtouch] Never pass -read_only_relocs to the native linker when bitcode is enabled.
* [mtouch] Bitcode requires linking with c++.
This particular case applies to shared libraries/frameworks (we already link
with c++ when building statically).
Put simulator assemblies in MonoBundle/simulator for frameworks, so that we
can have a single framework that contains both device and simulator
assemblies without assemblies conflicting between device and simulator.
The device assemblies continue in the same place, in the MonoBundle directory,
so no additional checks are needed on device.
Also stop using `mdb` as the name for debug symbols and remove
> static MdbReader mdb_reader;
since we're not mkbundl'ing mtouch anymore.
Related to https://github.com/xamarin/xamarin-macios/pull/2002 for mmp
* Use Visual Studio instead of Xamarin Studio.
* VS doesn't have mdtool, it has vstool.
Also there's no need to manually invoke the mdtool.exe executable anymore
(which we did because the mdtool executable had a min macOS version of 10.9,
and we used to build tests on older macOS versions [1]), since now we only run
tests on older macOS versions, we don't build those tests there.
[1] a1932b0ccd
- Before this mmp was not adding -framework, -weak_framework consistently on non-static registrar use cases
- GatherFrameworks was previously not ported from mtouch, and did not work as DeploymentTarget was unset in mmp
- Added verbose prints so users can determine why various framework linkages are added
- Fixed an issue where duplicate were being added due to HandleFramework shoving args by hand
- Tested with auto test and https://github.com/chamons/xm-version-regression-test manual test
When using debug simulator we don't generate main.m so we were not passing the gc options.
The MONO_GC_PARAMS variable is not in app.EnvironmentVariables (which only contains environment variables passed to mtouch using --setenv), which is why the above condition does not trigger.
Don't use the global command line arguments to determine input, because that's
not the input we use for app extensions anymore.
Instead explicitly pass the input arguments when creating the cache.
Implement support for sharing both code and resources between app extensions
and their container app:
* AOT-compiled code. Each shared assembly is only AOT-compiled once, and if
the assembly is built to a framework or dynamic library, it will also only
be included once in the final app (as a framework or dynamic library in the
container app, referenced directly by the app extension). If the assemblies
are built to static objects there won't be any size improvements in the app,
but the build will be much faster, because the assemblies will only be AOT-
compiled once.
* Any resources related to managed assemblies (debug files, config files,
satellite assemblies) will be put in the container app only.
Since these improvements are significant, code sharing will be enabled by
default.
Test results
============
For an extreme test project with 7 extensions (embedded-frameworks)[1]:
with code sharing cycle 9 difference
build time 1m 47s 3m 33s -1m 46s = ~50% faster
app size 26 MB 131 MB -105 MB = ~80% smaller
For a more normal test project (MyTabbedApplication)[2] - this is a simple application with 1 extension:
with code sharing cycle 9 difference
build time 0m 44s 0m 48s -4s = ~ 8% faster
app size 23 MB 37 MB -15 MB = ~40% smaller
Another tvOS app with one extension also show similar gains (MyTVApp)[3]:
with code sharing cycle 9 difference
build time 0m 22s 0m 48s -26s = ~54% faster
app size 22 MB 62 MB -40 MB = ~65% smaller
[1]: https://github.com/rolfbjarne/embedded-frameworks
[2]: https://github.com/xamarin/xamarin-macios/tree/cycle9/msbuild/tests/MyTabbedApplication
[3]: https://github.com/xamarin/xamarin-macios/tree/cycle9/msbuild/tests/MyTVApp
Store the location of every assembly that can't be deduced at runtime (i.e.
all assemblies that are build to frameworks, since there can be multiple
assemblies in each framework, and the framework name can be customized).
According to Vlad it's not necessary to set MONO_GC_PARAMS during AOT-
compilation, since all MONO_GC_PARAMS options can be changed at runtime:
Rolf Kvinge [16:35] @vlad.brezae is this true for all the different options MONO_GC_PARAMS take: https://github.com/xamarin/xamarin-macios/pull/1546#discussion_r97318092?
Rolf Kvinge [16:36] I remember this: https://bugzilla.xamarin.com/show_bug.cgi?id=35414#c14
Rofl Kvinge [16:36] which apparently you changed here, so that it can be changed at runtime: https://bugzilla.xamarin.com/show_bug.cgi?id=35414#c27
Rolf Kvinge [16:36] but I don't know if this is true for all the options you can pass using MONO_GC_PARAMS
Vlad Brezae [16:41] yes, it should be true for all of them, that was a bug
Rolf Kvinge [16:41] ok, that's great news 😄
Performance tests
-----------------
This is for a new watchOS extension project, built for release.
* The default (currently -O2) optimizations: 41s ( baseline ) 30.027.060 bytes ( baseline )
* All optimizations disabled (`--llvm-opt=all=`): 17s (-24s = -59%) 32.978.312 bytes (+2.951.252 = +10%)
* Optimized for size (`--llvm-opt=all=-Os`): 36s ( -5s = -12%) 28.617.408 bytes (-1.409.652 = -5%)
* Optimized for more size (`--llvm-opt=all=-Oz`): 35s ( -6s = -15%) 28.601.016 bytes (-1.426.044 = -5%)
* Optimized slightly (`--llvm-opt=all=-O1`): 35s ( -6s = -15%) 28.666.556 bytes (-1.360.504 = -5%)
* Optimized a lot (`--llvm-opt=all=-O3`): 41s ( 0s = 0%) 30.403.996 bytes (+ 376.936 = +1%)
Conclusions
-----------
* The fastest build by far (less than twice as fast) is if optimizations are
disabled, but this adds a 10% size penalty (~3 MB in this test case),
compared to the baseline, and 15% size penalty (4.3 MB) compared to -Oz.
* -Oz seems to have the best overall results: at least as fast as any other
optimized build, and the smallest app as well.
Caveats
-------
Some optimizations might not work the AOT compiled code. The resulting
binaries have not been tested.
Event sequence:
* mtouch is executed with the linker disabled.
* The linker pipeline copies all input assemblies (since the linker is
disabled the assemblies don't change) into the PreBuild directory. This will
keep the original timestamps of the input assemblies.
* mtouch is executed again, when none of the input assemblies changed.
* The linker pipeline will re-execute, because it will see that at least one
of the input assemblies (at least the .exe) is newer than at least one of
the assemblies in the PreBuild directory (usually a framework assembly,
because those have the original timestamp from their install location).
Fix:
Touch all the assemblies in the PreBuild directory after the linker pipeline
executes the first time. This way the second time mtouch is executed, it will
find that all assemblies in the PreBuild directory have timestamps later than
all the input assemblies, so it will load the cached linked assemblies,
instead of re-executing the linker pipeline.
Build extensions and the container app in the same mtouch process, by storing
all the mtouch arguments when called to build extensions in a text file, and
then reloading those arguments when called to build the main app.
This is required if we want to share code between extensions and the
container.
So that there can be multiple caches in the same process (which we'll have
once mtouch can compile extensions and the container app in the same process).
* [mtouch] Remove most static state and put it on an instance.
Remove most static state, and put it on an instance (of Application) instead.
Soon we'll build multiple apps (app extensions) in the same process, and we
need to make sure we're not inadvertedly (and incorrectly) sharing state
between apps, so remove as much static state as possible to avoid any
problems.
* [mtouch] Rename GetIsUsingClang -> IsUsingClang.
* [mtouch] Always require a SDK version when building.
Technically it was required before too, but the error messages were non-optimal:
it could for instance complain that the user is using an iOS framework that
was introduced in iOS 2.0.
* [mtouch tests] Rewrite MT0060 and MT0061 tests to use MTouchTool.
This makes sure we pass --sdk to mtouch (which MTouchTool does by default), so
that we don't run into MT0025 before the errors we're testing for.
The BundleId property is used by the code that generates the mSYM directory,
but its value was always the default value 'com.yourcompany.sample' instead of
looked up in the app's Info.plist.
So fix the BundleId property to do the expected.
Also fix the mSYM test (SymbolicationData) to actually test mSYM stuff (it was
partially disabled when we disabled automatic mSYM generation for C8, and
never re-enabled), and port it to the new and better test syntax, and add a
few more asserts to check the manifest.xml generation.
Run the partial static registrar separately for 32-bit and 64-bit, since this
is required with the upcoming changes to embed metadata tokens inside the
generated output, because the metadata tokens are different between the 32-bit
and 64-bit versions of Xamarin.iOS.dll.
Also make sure to properly resolve the 32-bit and 64-bit assemblies correctly
(by setting the ArchDirectory on the assembly resolver), so that we don't pick
up the reference assembly (which does not have the right metadata tokens).
Additionally stop running the partial static registrar for MonoTouch.Dialog-1,
since with the upcoming changes to use metadata tokens in the generated
output, we won't support registering anything more than once. This shouldn't
make much of an impact, because MonoTouch.Dialog-1 is fairly small, and
doesn't take long to register in the dynamic registrar. For device builds (or
when the static registrar is selected) this has no effect, since in that case
we're registering everythinga anyway.
Managed exception marshaling interferes with the debugger, because it adds
exception handlers to executing code, which makes the Mono runtime think an
exception is handled when logically it's not (although technically it is).
The consequence is that the IDEs will only be notified when we re-throw the
exception after catching it, making it impossible for the IDEs to stop when
the exception is thrown (they will instead stop when we re-throw the
exception).
So disable managed exception marshaling (unless the user changed the default
behavior) when a debugger is attached.
This is the same behavior as Xamarin.Android.
https://bugzilla.xamarin.com/show_bug.cgi?id=45116
Setting this option prints this to stdout:
> Mono Warning: option gen-compact-seq-points is deprecated.
and it's ignored, so just don't set this option.
* [tests] Remove Classic SDK tests.
* Remove XI/Classic support.
This also means we can remove support for the legacy registrars.
* [monotouch-test] Remove legacy registrar tests.
* [tests/mtouch] Remove Classic tests (and legacy registrar logic).
* [tests/scripted] Fix tests to reference Xamarin.iOS.dll.