WSL2-Linux-Kernel/arch/arm/mm/mmu.c

1643 строки
44 KiB
C
Исходник Обычный вид История

/*
* linux/arch/arm/mm/mmu.c
*
* Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/memblock.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
#include <linux/sizes.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/sections.h>
#include <asm/cachetype.h>
#include <asm/fixmap.h>
#include <asm/sections.h>
#include <asm/setup.h>
ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast We suffer an unfortunate combination of "features" which makes highmem support on platforms without hardware TLB maintainence broadcast difficult: - we need kmap_high_get() support for DMA cache coherence - this requires kmap_high() to take a spinlock with IRQs disabled - kmap_high() occasionally calls flush_all_zero_pkmaps() to clear out old mappings - flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which on s/w IPI'd systems eventually calls smp_call_function_many() - smp_call_function_many() must not be called with IRQs disabled: WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240() Modules linked in: Backtrace: [<c00306f0>] (dump_backtrace+0x0/0x108) from [<c0286e6c>] (dump_stack+0x18/0x1c) r6:c007cd18 r5:c02ff228 r4:0000017c [<c0286e54>] (dump_stack+0x0/0x1c) from [<c0053e08>] (warn_slowpath_common+0x50/0x80) [<c0053db8>] (warn_slowpath_common+0x0/0x80) from [<c0053e50>] (warn_slowpath_null+0x18/0x1c) r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34 [<c0053e38>] (warn_slowpath_null+0x0/0x1c) from [<c007cd18>] (smp_call_function_many+0xc4/0x240) [<c007cc54>] (smp_call_function_many+0x0/0x240) from [<c007cec0>] (smp_call_function+0x2c/0x38) [<c007ce94>] (smp_call_function+0x0/0x38) from [<c005980c>] (on_each_cpu+0x1c/0x38) [<c00597f0>] (on_each_cpu+0x0/0x38) from [<c0031788>] (flush_tlb_kernel_range+0x50/0x58) r6:00000001 r5:00000800 r4:c05f3590 [<c0031738>] (flush_tlb_kernel_range+0x0/0x58) from [<c009c600>] (flush_all_zero_pkmaps+0xc0/0xe8) [<c009c540>] (flush_all_zero_pkmaps+0x0/0xe8) from [<c009c6b4>] (kmap_high+0x8c/0x1e0) [<c009c628>] (kmap_high+0x0/0x1e0) from [<c00364a8>] (kmap+0x44/0x5c) [<c0036464>] (kmap+0x0/0x5c) from [<c0109dfc>] (cramfs_readpage+0x3c/0x194) [<c0109dc0>] (cramfs_readpage+0x0/0x194) from [<c0090c14>] (__do_page_cache_readahead+0x1f0/0x290) [<c0090a24>] (__do_page_cache_readahead+0x0/0x290) from [<c0090ce4>] (ra_submit+0x30/0x38) [<c0090cb4>] (ra_submit+0x0/0x38) from [<c0089384>] (filemap_fault+0x3dc/0x438) r4:c1819988 [<c0088fa8>] (filemap_fault+0x0/0x438) from [<c009d21c>] (__do_fault+0x58/0x43c) [<c009d1c4>] (__do_fault+0x0/0x43c) from [<c009e8cc>] (handle_mm_fault+0x104/0x318) [<c009e7c8>] (handle_mm_fault+0x0/0x318) from [<c0033c98>] (do_page_fault+0x188/0x1e4) [<c0033b10>] (do_page_fault+0x0/0x1e4) from [<c0033ddc>] (do_translation_fault+0x7c/0x84) [<c0033d60>] (do_translation_fault+0x0/0x84) from [<c002b474>] (do_DataAbort+0x40/0xa4) r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0 [<c002b434>] (do_DataAbort+0x0/0xa4) from [<c002bcac>] (__dabt_svc+0x4c/0x60) ... So we disable highmem support on these systems. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-27 23:55:43 +04:00
#include <asm/smp_plat.h>
#include <asm/tlb.h>
#include <asm/highmem.h>
#include <asm/system_info.h>
#include <asm/traps.h>
#include <asm/procinfo.h>
#include <asm/memory.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>
#include <asm/fixmap.h>
#include "fault.h"
#include "mm.h"
#include "tcm.h"
/*
* empty_zero_page is a special page that is used for
* zero-initialized data and COW.
*/
struct page *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);
/*
* The pmd table for the upper-most set of pages.
*/
pmd_t *top_pmd;
pmdval_t user_pmd_table = _PAGE_USER_TABLE;
#define CPOLICY_UNCACHED 0
#define CPOLICY_BUFFERED 1
#define CPOLICY_WRITETHROUGH 2
#define CPOLICY_WRITEBACK 3
#define CPOLICY_WRITEALLOC 4
static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
static unsigned int ecc_mask __initdata = 0;
pgprot_t pgprot_user;
pgprot_t pgprot_kernel;
pgprot_t pgprot_hyp_device;
pgprot_t pgprot_s2;
pgprot_t pgprot_s2_device;
EXPORT_SYMBOL(pgprot_user);
EXPORT_SYMBOL(pgprot_kernel);
struct cachepolicy {
const char policy[16];
unsigned int cr_mask;
pmdval_t pmd;
pteval_t pte;
pteval_t pte_s2;
};
#ifdef CONFIG_ARM_LPAE
#define s2_policy(policy) policy
#else
#define s2_policy(policy) 0
#endif
static struct cachepolicy cache_policies[] __initdata = {
{
.policy = "uncached",
.cr_mask = CR_W|CR_C,
.pmd = PMD_SECT_UNCACHED,
.pte = L_PTE_MT_UNCACHED,
.pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED),
}, {
.policy = "buffered",
.cr_mask = CR_C,
.pmd = PMD_SECT_BUFFERED,
.pte = L_PTE_MT_BUFFERABLE,
.pte_s2 = s2_policy(L_PTE_S2_MT_UNCACHED),
}, {
.policy = "writethrough",
.cr_mask = 0,
.pmd = PMD_SECT_WT,
.pte = L_PTE_MT_WRITETHROUGH,
.pte_s2 = s2_policy(L_PTE_S2_MT_WRITETHROUGH),
}, {
.policy = "writeback",
.cr_mask = 0,
.pmd = PMD_SECT_WB,
.pte = L_PTE_MT_WRITEBACK,
.pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK),
}, {
.policy = "writealloc",
.cr_mask = 0,
.pmd = PMD_SECT_WBWA,
.pte = L_PTE_MT_WRITEALLOC,
.pte_s2 = s2_policy(L_PTE_S2_MT_WRITEBACK),
}
};
#ifdef CONFIG_CPU_CP15
static unsigned long initial_pmd_value __initdata = 0;
/*
* Initialise the cache_policy variable with the initial state specified
* via the "pmd" value. This is used to ensure that on ARMv6 and later,
* the C code sets the page tables up with the same policy as the head
* assembly code, which avoids an illegal state where the TLBs can get
* confused. See comments in early_cachepolicy() for more information.
*/
void __init init_default_cache_policy(unsigned long pmd)
{
int i;
initial_pmd_value = pmd;
pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE;
for (i = 0; i < ARRAY_SIZE(cache_policies); i++)
if (cache_policies[i].pmd == pmd) {
cachepolicy = i;
break;
}
if (i == ARRAY_SIZE(cache_policies))
pr_err("ERROR: could not find cache policy\n");
}
/*
* These are useful for identifying cache coherency problems by allowing
* the cache or the cache and writebuffer to be turned off. (Note: the
* write buffer should not be on and the cache off).
*/
static int __init early_cachepolicy(char *p)
{
int i, selected = -1;
for (i = 0; i < ARRAY_SIZE(cache_policies); i++) {
int len = strlen(cache_policies[i].policy);
if (memcmp(p, cache_policies[i].policy, len) == 0) {
selected = i;
break;
}
}
if (selected == -1)
pr_err("ERROR: unknown or unsupported cache policy\n");
/*
* This restriction is partly to do with the way we boot; it is
* unpredictable to have memory mapped using two different sets of
* memory attributes (shared, type, and cache attribs). We can not
* change these attributes once the initial assembly has setup the
* page tables.
*/
if (cpu_architecture() >= CPU_ARCH_ARMv6 && selected != cachepolicy) {
pr_warn("Only cachepolicy=%s supported on ARMv6 and later\n",
cache_policies[cachepolicy].policy);
return 0;
}
if (selected != cachepolicy) {
unsigned long cr = __clear_cr(cache_policies[selected].cr_mask);
cachepolicy = selected;
flush_cache_all();
set_cr(cr);
}
return 0;
}
early_param("cachepolicy", early_cachepolicy);
static int __init early_nocache(char *__unused)
{
char *p = "buffered";
pr_warn("nocache is deprecated; use cachepolicy=%s\n", p);
early_cachepolicy(p);
return 0;
}
early_param("nocache", early_nocache);
static int __init early_nowrite(char *__unused)
{
char *p = "uncached";
pr_warn("nowb is deprecated; use cachepolicy=%s\n", p);
early_cachepolicy(p);
return 0;
}
early_param("nowb", early_nowrite);
#ifndef CONFIG_ARM_LPAE
static int __init early_ecc(char *p)
{
if (memcmp(p, "on", 2) == 0)
ecc_mask = PMD_PROTECTION;
else if (memcmp(p, "off", 3) == 0)
ecc_mask = 0;
return 0;
}
early_param("ecc", early_ecc);
#endif
#else /* ifdef CONFIG_CPU_CP15 */
static int __init early_cachepolicy(char *p)
{
pr_warn("cachepolicy kernel parameter not supported without cp15\n");
}
early_param("cachepolicy", early_cachepolicy);
static int __init noalign_setup(char *__unused)
{
pr_warn("noalign kernel parameter not supported without cp15\n");
}
__setup("noalign", noalign_setup);
#endif /* ifdef CONFIG_CPU_CP15 / else */
#define PROT_PTE_DEVICE L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
#define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE
#define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE
static struct mem_type mem_types[] = {
[MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
L_PTE_SHARED,
.prot_pte_s2 = s2_policy(PROT_PTE_S2_DEVICE) |
s2_policy(L_PTE_S2_MT_DEV_SHARED) |
L_PTE_SHARED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_S,
.domain = DOMAIN_IO,
},
[MT_DEVICE_NONSHARED] = { /* ARMv6 non-shared device */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_NONSHARED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE,
.domain = DOMAIN_IO,
},
[MT_DEVICE_CACHED] = { /* ioremap_cached */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_CACHED,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE | PMD_SECT_WB,
.domain = DOMAIN_IO,
},
[ARM] 5241/1: provide ioremap_wc() This patch provides an ARM implementation of ioremap_wc(). We use different page table attributes depending on which CPU we are running on: - Non-XScale ARMv5 and earlier systems: The ARMv5 ARM documents four possible mapping types (CB=00/01/10/11). We can't use any of the cached memory types (CB=10/11), since that breaks coherency with peripheral devices. Both CB=00 and CB=01 are suitable for _wc, and CB=01 (Uncached/Buffered) allows the hardware more freedom than CB=00, so we'll use that. (The ARMv5 ARM seems to suggest that CB=01 is allowed to delay stores but isn't allowed to merge them, but there is no other mapping type we can use that allows the hardware to delay and merge stores, so we'll go with CB=01.) - XScale v1/v2 (ARMv5): same as the ARMv5 case above, with the slight difference that on these platforms, CB=01 actually _does_ allow merging stores. (If you want noncoalescing bufferable behavior on Xscale v1/v2, you need to use XCB=101.) - Xscale v3 (ARMv5) and ARMv6+: on these systems, we use TEXCB=00100 mappings (Inner/Outer Uncacheable in xsc3 parlance, Uncached Normal in ARMv6 parlance). The ARMv6 ARM explicitly says that any accesses to Normal memory can be merged, which makes Normal memory more suitable for _wc mappings than Device or Strongly Ordered memory, as the latter two mapping types are guaranteed to maintain transaction number, size and order. We use the Uncached variety of Normal mappings for the same reason that we can't use C=1 mappings on ARMv5. The xsc3 Architecture Specification documents TEXCB=00100 as being Uncacheable and allowing coalescing of writes, which is also just what we need. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 16:17:11 +04:00
[MT_DEVICE_WC] = { /* ioremap_wc */
.prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_WC,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PROT_SECT_DEVICE,
.domain = DOMAIN_IO,
},
[MT_UNCACHED] = {
.prot_pte = PROT_PTE_DEVICE,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_IO,
},
[MT_CACHECLEAN] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
},
#ifndef CONFIG_ARM_LPAE
[MT_MINICLEAN] = {
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_MINICACHE,
.domain = DOMAIN_KERNEL,
},
#endif
[MT_LOW_VECTORS] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_RDONLY,
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_VECTORS,
},
[MT_HIGH_VECTORS] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_USER | L_PTE_RDONLY,
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_VECTORS,
},
[MT_MEMORY_RWX] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_RW] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_XN,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
[MT_ROM] = {
.prot_sect = PMD_TYPE_SECT,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_RWX_NONCACHED] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_MT_BUFFERABLE,
.prot_l1 = PMD_TYPE_TABLE,
2009-03-12 22:11:43 +03:00
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_RW_DTCM] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_XN,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_RWX_ITCM] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_RW_SO] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_MT_UNCACHED | L_PTE_XN,
.prot_l1 = PMD_TYPE_TABLE,
.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
PMD_SECT_UNCACHED | PMD_SECT_XN,
.domain = DOMAIN_KERNEL,
},
[MT_MEMORY_DMA_READY] = {
.prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
L_PTE_XN,
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_KERNEL,
},
};
const struct mem_type *get_mem_type(unsigned int type)
{
return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
}
EXPORT_SYMBOL(get_mem_type);
static pte_t *(*pte_offset_fixmap)(pmd_t *dir, unsigned long addr);
static pte_t bm_pte[PTRS_PER_PTE + PTE_HWTABLE_PTRS]
__aligned(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE) __initdata;
static pte_t * __init pte_offset_early_fixmap(pmd_t *dir, unsigned long addr)
{
return &bm_pte[pte_index(addr)];
}
static pte_t *pte_offset_late_fixmap(pmd_t *dir, unsigned long addr)
{
return pte_offset_kernel(dir, addr);
}
static inline pmd_t * __init fixmap_pmd(unsigned long addr)
{
pgd_t *pgd = pgd_offset_k(addr);
pud_t *pud = pud_offset(pgd, addr);
pmd_t *pmd = pmd_offset(pud, addr);
return pmd;
}
void __init early_fixmap_init(void)
{
pmd_t *pmd;
/*
* The early fixmap range spans multiple pmds, for which
* we are not prepared:
*/
BUILD_BUG_ON((__fix_to_virt(__end_of_early_ioremap_region) >> PMD_SHIFT)
!= FIXADDR_TOP >> PMD_SHIFT);
pmd = fixmap_pmd(FIXADDR_TOP);
pmd_populate_kernel(&init_mm, pmd, bm_pte);
pte_offset_fixmap = pte_offset_early_fixmap;
}
/*
* To avoid TLB flush broadcasts, this uses local_flush_tlb_kernel_range().
* As a result, this can only be called with preemption disabled, as under
* stop_machine().
*/
void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
{
unsigned long vaddr = __fix_to_virt(idx);
pte_t *pte = pte_offset_fixmap(pmd_off_k(vaddr), vaddr);
/* Make sure fixmap region does not exceed available allocation. */
BUILD_BUG_ON(FIXADDR_START + (__end_of_fixed_addresses * PAGE_SIZE) >
FIXADDR_END);
BUG_ON(idx >= __end_of_fixed_addresses);
if (pgprot_val(prot))
set_pte_at(NULL, vaddr, pte,
pfn_pte(phys >> PAGE_SHIFT, prot));
else
pte_clear(NULL, vaddr, pte);
local_flush_tlb_kernel_range(vaddr, vaddr + PAGE_SIZE);
}
/*
* Adjust the PMD section entries according to the CPU in use.
*/
static void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
pteval_t user_pgprot, kern_pgprot, vecs_pgprot;
pteval_t hyp_device_pgprot, s2_pgprot, s2_device_pgprot;
int cpu_arch = cpu_architecture();
int i;
if (cpu_arch < CPU_ARCH_ARMv6) {
#if defined(CONFIG_CPU_DCACHE_DISABLE)
if (cachepolicy > CPOLICY_BUFFERED)
cachepolicy = CPOLICY_BUFFERED;
#elif defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
if (cachepolicy > CPOLICY_WRITETHROUGH)
cachepolicy = CPOLICY_WRITETHROUGH;
#endif
}
if (cpu_arch < CPU_ARCH_ARMv5) {
if (cachepolicy >= CPOLICY_WRITEALLOC)
cachepolicy = CPOLICY_WRITEBACK;
ecc_mask = 0;
}
if (is_smp()) {
if (cachepolicy != CPOLICY_WRITEALLOC) {
pr_warn("Forcing write-allocate cache policy for SMP\n");
cachepolicy = CPOLICY_WRITEALLOC;
}
if (!(initial_pmd_value & PMD_SECT_S)) {
pr_warn("Forcing shared mappings for SMP\n");
initial_pmd_value |= PMD_SECT_S;
}
}
[ARM] 5241/1: provide ioremap_wc() This patch provides an ARM implementation of ioremap_wc(). We use different page table attributes depending on which CPU we are running on: - Non-XScale ARMv5 and earlier systems: The ARMv5 ARM documents four possible mapping types (CB=00/01/10/11). We can't use any of the cached memory types (CB=10/11), since that breaks coherency with peripheral devices. Both CB=00 and CB=01 are suitable for _wc, and CB=01 (Uncached/Buffered) allows the hardware more freedom than CB=00, so we'll use that. (The ARMv5 ARM seems to suggest that CB=01 is allowed to delay stores but isn't allowed to merge them, but there is no other mapping type we can use that allows the hardware to delay and merge stores, so we'll go with CB=01.) - XScale v1/v2 (ARMv5): same as the ARMv5 case above, with the slight difference that on these platforms, CB=01 actually _does_ allow merging stores. (If you want noncoalescing bufferable behavior on Xscale v1/v2, you need to use XCB=101.) - Xscale v3 (ARMv5) and ARMv6+: on these systems, we use TEXCB=00100 mappings (Inner/Outer Uncacheable in xsc3 parlance, Uncached Normal in ARMv6 parlance). The ARMv6 ARM explicitly says that any accesses to Normal memory can be merged, which makes Normal memory more suitable for _wc mappings than Device or Strongly Ordered memory, as the latter two mapping types are guaranteed to maintain transaction number, size and order. We use the Uncached variety of Normal mappings for the same reason that we can't use C=1 mappings on ARMv5. The xsc3 Architecture Specification documents TEXCB=00100 as being Uncacheable and allowing coalescing of writes, which is also just what we need. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 16:17:11 +04:00
/*
* Strip out features not present on earlier architectures.
* Pre-ARMv5 CPUs don't have TEX bits. Pre-ARMv6 CPUs or those
* without extended page tables don't have the 'Shared' bit.
[ARM] 5241/1: provide ioremap_wc() This patch provides an ARM implementation of ioremap_wc(). We use different page table attributes depending on which CPU we are running on: - Non-XScale ARMv5 and earlier systems: The ARMv5 ARM documents four possible mapping types (CB=00/01/10/11). We can't use any of the cached memory types (CB=10/11), since that breaks coherency with peripheral devices. Both CB=00 and CB=01 are suitable for _wc, and CB=01 (Uncached/Buffered) allows the hardware more freedom than CB=00, so we'll use that. (The ARMv5 ARM seems to suggest that CB=01 is allowed to delay stores but isn't allowed to merge them, but there is no other mapping type we can use that allows the hardware to delay and merge stores, so we'll go with CB=01.) - XScale v1/v2 (ARMv5): same as the ARMv5 case above, with the slight difference that on these platforms, CB=01 actually _does_ allow merging stores. (If you want noncoalescing bufferable behavior on Xscale v1/v2, you need to use XCB=101.) - Xscale v3 (ARMv5) and ARMv6+: on these systems, we use TEXCB=00100 mappings (Inner/Outer Uncacheable in xsc3 parlance, Uncached Normal in ARMv6 parlance). The ARMv6 ARM explicitly says that any accesses to Normal memory can be merged, which makes Normal memory more suitable for _wc mappings than Device or Strongly Ordered memory, as the latter two mapping types are guaranteed to maintain transaction number, size and order. We use the Uncached variety of Normal mappings for the same reason that we can't use C=1 mappings on ARMv5. The xsc3 Architecture Specification documents TEXCB=00100 as being Uncacheable and allowing coalescing of writes, which is also just what we need. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 16:17:11 +04:00
*/
if (cpu_arch < CPU_ARCH_ARMv5)
for (i = 0; i < ARRAY_SIZE(mem_types); i++)
mem_types[i].prot_sect &= ~PMD_SECT_TEX(7);
if ((cpu_arch < CPU_ARCH_ARMv6 || !(cr & CR_XP)) && !cpu_is_xsc3())
for (i = 0; i < ARRAY_SIZE(mem_types); i++)
mem_types[i].prot_sect &= ~PMD_SECT_S;
/*
* ARMv5 and lower, bit 4 must be set for page tables (was: cache
* "update-able on write" bit on ARM610). However, Xscale and
* Xscale3 require this bit to be cleared.
*/
ARM: make xscale iwmmxt code multiplatform aware In a multiplatform configuration, we may end up building a kernel for both Marvell PJ1 and an ARMv4 CPU implementation. In that case, the xscale-cp0 code is built with gcc -march=armv4{,t}, which results in a build error from the coprocessor instructions. Since we know this code will only have to run on an actual xscale processor, we can simply build the entire file for ARMv5TE. Related to this, we need to handle the iWMMXT initialization sequence differently during boot, to ensure we don't try to touch xscale specific registers on other CPUs from the xscale_cp0_init initcall. cpu_is_xscale() used to be hardcoded to '1' in any configuration that enables any XScale-compatible core, but this breaks once we can have a combined kernel with MMP1 and something else. In this patch, I replace the existing cpu_is_xscale() macro with a new cpu_is_xscale_family() macro that evaluates true for xscale, xsc3 and mohawk, which makes the behavior more deterministic. The two existing users of cpu_is_xscale() are modified accordingly, but slightly change behavior for kernels that enable CPU_MOHAWK without also enabling CPU_XSCALE or CPU_XSC3. Previously, these would leave leave PMD_BIT4 in the page tables untouched, now they clear it as we've always done for kernels that enable both MOHAWK and the support for the older CPU types. Since the previous behavior was inconsistent, I assume it was unintentional. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-04-15 17:38:39 +04:00
if (cpu_is_xscale_family()) {
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
mem_types[i].prot_sect &= ~PMD_BIT4;
mem_types[i].prot_l1 &= ~PMD_BIT4;
}
} else if (cpu_arch < CPU_ARCH_ARMv6) {
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
if (mem_types[i].prot_l1)
mem_types[i].prot_l1 |= PMD_BIT4;
if (mem_types[i].prot_sect)
mem_types[i].prot_sect |= PMD_BIT4;
}
}
/*
* Mark the device areas according to the CPU/architecture.
*/
if (cpu_is_xsc3() || (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP))) {
if (!cpu_is_xsc3()) {
/*
* Mark device regions on ARMv6+ as execute-never
* to prevent speculative instruction fetches.
*/
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_XN;
mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN;
mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN;
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN;
/* Also setup NX memory mapping */
mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN;
}
if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
/*
* For ARMv7 with TEX remapping,
* - shared device is SXCB=1100
* - nonshared device is SXCB=0100
* - write combine device mem is SXCB=0001
* (Uncached Normal memory)
*/
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1);
mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(1);
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
} else if (cpu_is_xsc3()) {
/*
* For Xscale3,
* - shared device is TEXCB=00101
* - nonshared device is TEXCB=01000
* - write combine device mem is TEXCB=00100
* (Inner/Outer Uncacheable in xsc3 parlance)
*/
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_TEX(1) | PMD_SECT_BUFFERED;
mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
} else {
/*
* For ARMv6 and ARMv7 without TEX remapping,
* - shared device is TEXCB=00001
* - nonshared device is TEXCB=01000
* - write combine device mem is TEXCB=00100
* (Uncached Normal in ARMv6 parlance).
*/
mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_TEX(2);
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
}
} else {
/*
* On others, write combining is "Uncached/Buffered"
*/
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
}
/*
* Now deal with the memory-type mappings
*/
cp = &cache_policies[cachepolicy];
vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
s2_pgprot = cp->pte_s2;
hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte;
s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2;
#ifndef CONFIG_ARM_LPAE
ARM: 7954/1: mm: remove remaining domain support from ARMv6 CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do not have hardware thread registers. The lack of these registers requires the kernel to update the vectors page at each context switch in order to write a new TLS pointer. This write must be done via the userspace mapping, since aliasing caches can lead to expensive flushing when using kmap. Finally, this requires the vectors page to be mapped r/w for kernel and r/o for user, which has implications for things like put_user which must trigger CoW appropriately when targetting user pages. The upshot of all this is that a v6/v7 kernel makes use of domains to segregate kernel and user memory accesses. This has the nasty side-effect of making device mappings executable, which has been observed to cause subtle bugs on recent cores (e.g. Cortex-A15 performing a speculative instruction fetch from the GIC and acking an interrupt in the process). This patch solves this problem by removing the remaining domain support from ARMv6. A new memory type is added specifically for the vectors page which allows that page (and only that page) to be mapped as user r/o, kernel r/w. All other user r/o pages are mapped also as kernel r/o. Patch co-developed with Russell King. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-07 22:12:27 +04:00
/*
* We don't use domains on ARMv6 (since this causes problems with
* v6/v7 kernels), so we must use a separate memory type for user
* r/o, kernel r/w to map the vectors page.
*/
if (cpu_arch == CPU_ARCH_ARMv6)
vecs_pgprot |= L_PTE_MT_VECTORS;
/*
* Check is it with support for the PXN bit
* in the Short-descriptor translation table format descriptors.
*/
if (cpu_arch == CPU_ARCH_ARMv7 &&
(read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) >= 4) {
user_pmd_table |= PMD_PXNTABLE;
}
ARM: 7954/1: mm: remove remaining domain support from ARMv6 CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do not have hardware thread registers. The lack of these registers requires the kernel to update the vectors page at each context switch in order to write a new TLS pointer. This write must be done via the userspace mapping, since aliasing caches can lead to expensive flushing when using kmap. Finally, this requires the vectors page to be mapped r/w for kernel and r/o for user, which has implications for things like put_user which must trigger CoW appropriately when targetting user pages. The upshot of all this is that a v6/v7 kernel makes use of domains to segregate kernel and user memory accesses. This has the nasty side-effect of making device mappings executable, which has been observed to cause subtle bugs on recent cores (e.g. Cortex-A15 performing a speculative instruction fetch from the GIC and acking an interrupt in the process). This patch solves this problem by removing the remaining domain support from ARMv6. A new memory type is added specifically for the vectors page which allows that page (and only that page) to be mapped as user r/o, kernel r/w. All other user r/o pages are mapped also as kernel r/o. Patch co-developed with Russell King. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-07 22:12:27 +04:00
#endif
/*
* ARMv6 and above have extended page tables.
*/
if (cpu_arch >= CPU_ARCH_ARMv6 && (cr & CR_XP)) {
#ifndef CONFIG_ARM_LPAE
/*
* Mark cache clean areas and XIP ROM read only
* from SVC mode and no access from userspace.
*/
mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
#endif
/*
* If the initial page tables were created with the S bit
* set, then we need to do the same here for the same
* reasons given in early_cachepolicy().
*/
if (initial_pmd_value & PMD_SECT_S) {
user_pgprot |= L_PTE_SHARED;
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
s2_pgprot |= L_PTE_SHARED;
mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RWX].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED;
}
}
2009-03-12 22:11:43 +03:00
/*
* Non-cacheable Normal - intended for memory areas that must
* not cause dirty cache line writebacks when used
*/
if (cpu_arch >= CPU_ARCH_ARMv6) {
if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) {
/* Non-cacheable Normal is XCB = 001 */
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |=
2009-03-12 22:11:43 +03:00
PMD_SECT_BUFFERED;
} else {
/* For both ARMv6 and non-TEX-remapping ARMv7 */
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |=
2009-03-12 22:11:43 +03:00
PMD_SECT_TEX(1);
}
} else {
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE;
2009-03-12 22:11:43 +03:00
}
#ifdef CONFIG_ARM_LPAE
/*
* Do not generate access flag faults for the kernel mappings.
*/
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
mem_types[i].prot_pte |= PTE_EXT_AF;
if (mem_types[i].prot_sect)
mem_types[i].prot_sect |= PMD_SECT_AF;
}
kern_pgprot |= PTE_EXT_AF;
vecs_pgprot |= PTE_EXT_AF;
/*
* Set PXN for user mappings
*/
user_pgprot |= PTE_EXT_PXN;
#endif
for (i = 0; i < 16; i++) {
pteval_t v = pgprot_val(protection_map[i]);
protection_map[i] = __pgprot(v | user_pgprot);
}
mem_types[MT_LOW_VECTORS].prot_pte |= vecs_pgprot;
mem_types[MT_HIGH_VECTORS].prot_pte |= vecs_pgprot;
pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
L_PTE_DIRTY | kern_pgprot);
pgprot_s2 = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | s2_pgprot);
pgprot_s2_device = __pgprot(s2_device_pgprot);
pgprot_hyp_device = __pgprot(hyp_device_pgprot);
mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
mem_types[MT_MEMORY_RWX].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd;
mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot;
mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask;
mem_types[MT_ROM].prot_sect |= cp->pmd;
switch (cp->pmd) {
case PMD_SECT_WT:
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WT;
break;
case PMD_SECT_WB:
case PMD_SECT_WBWA:
mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_WB;
break;
}
pr_info("Memory policy: %sData cache %s\n",
ecc_mask ? "ECC enabled, " : "", cp->policy);
for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
struct mem_type *t = &mem_types[i];
if (t->prot_l1)
t->prot_l1 |= PMD_DOMAIN(t->domain);
if (t->prot_sect)
t->prot_sect |= PMD_DOMAIN(t->domain);
}
}
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
if (!pfn_valid(pfn))
return pgprot_noncached(vma_prot);
else if (file->f_flags & O_SYNC)
return pgprot_writecombine(vma_prot);
return vma_prot;
}
EXPORT_SYMBOL(phys_mem_access_prot);
#endif
#define vectors_base() (vectors_high() ? 0xffff0000 : 0)
static void __init *early_alloc_aligned(unsigned long sz, unsigned long align)
{
void *ptr = __va(memblock_alloc(sz, align));
memset(ptr, 0, sz);
return ptr;
}
static void __init *early_alloc(unsigned long sz)
{
return early_alloc_aligned(sz, sz);
}
static void *__init late_alloc(unsigned long sz)
{
void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz));
BUG_ON(!ptr);
return ptr;
}
static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr,
unsigned long prot,
void *(*alloc)(unsigned long sz))
{
if (pmd_none(*pmd)) {
pte_t *pte = alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
__pmd_populate(pmd, __pa(pte), prot);
}
BUG_ON(pmd_bad(*pmd));
return pte_offset_kernel(pmd, addr);
}
static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
unsigned long prot)
{
return pte_alloc(pmd, addr, prot, early_alloc);
}
static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
unsigned long end, unsigned long pfn,
const struct mem_type *type,
void *(*alloc)(unsigned long sz),
bool ng)
{
pte_t *pte = pte_alloc(pmd, addr, type->prot_l1, alloc);
do {
set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)),
ng ? PTE_EXT_NG : 0);
pfn++;
} while (pte++, addr += PAGE_SIZE, addr != end);
}
static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type, bool ng)
{
pmd_t *p = pmd;
#ifndef CONFIG_ARM_LPAE
/*
* In classic MMU format, puds and pmds are folded in to
* the pgds. pmd_offset gives the PGD entry. PGDs refer to a
* group of L1 entries making up one logical pointer to
* an L2 table (2MB), where as PMDs refer to the individual
* L1 entries (1MB). Hence increment to get the correct
* offset for odd 1MB sections.
* (See arch/arm/include/asm/pgtable-2level.h)
*/
if (addr & SECTION_SIZE)
pmd++;
#endif
do {
*pmd = __pmd(phys | type->prot_sect | (ng ? PMD_SECT_nG : 0));
phys += SECTION_SIZE;
} while (pmd++, addr += SECTION_SIZE, addr != end);
flush_pmd_entry(p);
}
static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type,
void *(*alloc)(unsigned long sz), bool ng)
{
pmd_t *pmd = pmd_offset(pud, addr);
unsigned long next;
do {
/*
* With LPAE, we must loop over to map
* all the pmds for the given range.
*/
next = pmd_addr_end(addr, end);
/*
* Try a section mapping - addr, next and phys must all be
* aligned to a section boundary.
*/
if (type->prot_sect &&
((addr | next | phys) & ~SECTION_MASK) == 0) {
__map_init_section(pmd, addr, next, phys, type, ng);
} else {
alloc_init_pte(pmd, addr, next,
__phys_to_pfn(phys), type, alloc, ng);
}
phys += next - addr;
} while (pmd++, addr = next, addr != end);
}
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type,
void *(*alloc)(unsigned long sz), bool ng)
{
pud_t *pud = pud_offset(pgd, addr);
unsigned long next;
do {
next = pud_addr_end(addr, end);
alloc_init_pmd(pud, addr, next, phys, type, alloc, ng);
phys += next - addr;
} while (pud++, addr = next, addr != end);
}
#ifndef CONFIG_ARM_LPAE
static void __init create_36bit_mapping(struct mm_struct *mm,
struct map_desc *md,
const struct mem_type *type,
bool ng)
{
unsigned long addr, length, end;
phys_addr_t phys;
pgd_t *pgd;
addr = md->virtual;
phys = __pfn_to_phys(md->pfn);
length = PAGE_ALIGN(md->length);
if (!(cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3())) {
pr_err("MM: CPU does not support supersection mapping for 0x%08llx at 0x%08lx\n",
(long long)__pfn_to_phys((u64)md->pfn), addr);
return;
}
/* N.B. ARMv6 supersections are only defined to work with domain 0.
* Since domain assignments can in fact be arbitrary, the
* 'domain == 0' check below is required to insure that ARMv6
* supersections are only allocated for domain 0 regardless
* of the actual domain assignments in use.
*/
if (type->domain) {
pr_err("MM: invalid domain in supersection mapping for 0x%08llx at 0x%08lx\n",
(long long)__pfn_to_phys((u64)md->pfn), addr);
return;
}
if ((addr | length | __pfn_to_phys(md->pfn)) & ~SUPERSECTION_MASK) {
pr_err("MM: cannot create mapping for 0x%08llx at 0x%08lx invalid alignment\n",
(long long)__pfn_to_phys((u64)md->pfn), addr);
return;
}
/*
* Shift bits [35:32] of address into bits [23:20] of PMD
* (See ARMv6 spec).
*/
phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
pgd = pgd_offset(mm, addr);
end = addr + length;
do {
pud_t *pud = pud_offset(pgd, addr);
pmd_t *pmd = pmd_offset(pud, addr);
int i;
for (i = 0; i < 16; i++)
*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER |
(ng ? PMD_SECT_nG : 0));
addr += SUPERSECTION_SIZE;
phys += SUPERSECTION_SIZE;
pgd += SUPERSECTION_SIZE >> PGDIR_SHIFT;
} while (addr != end);
}
#endif /* !CONFIG_ARM_LPAE */
static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md,
void *(*alloc)(unsigned long sz),
bool ng)
{
unsigned long addr, length, end;
phys_addr_t phys;
const struct mem_type *type;
pgd_t *pgd;
type = &mem_types[md->type];
#ifndef CONFIG_ARM_LPAE
/*
* Catch 36-bit addresses
*/
if (md->pfn >= 0x100000) {
create_36bit_mapping(mm, md, type, ng);
return;
}
#endif
addr = md->virtual & PAGE_MASK;
phys = __pfn_to_phys(md->pfn);
length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
pr_warn("BUG: map for 0x%08llx at 0x%08lx can not be mapped using pages, ignoring.\n",
(long long)__pfn_to_phys(md->pfn), addr);
return;
}
pgd = pgd_offset(mm, addr);
end = addr + length;
do {
unsigned long next = pgd_addr_end(addr, end);
alloc_init_pud(pgd, addr, next, phys, type, alloc, ng);
phys += next - addr;
addr = next;
} while (pgd++, addr != end);
}
/*
* Create the page directory entries and any necessary
* page tables for the mapping specified by `md'. We
* are able to cope here with varying sizes and address
* offsets, and we take full advantage of sections and
* supersections.
*/
static void __init create_mapping(struct map_desc *md)
{
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
(md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
}
__create_mapping(&init_mm, md, early_alloc, false);
}
void __init create_mapping_late(struct mm_struct *mm, struct map_desc *md,
bool ng)
{
#ifdef CONFIG_ARM_LPAE
pud_t *pud = pud_alloc(mm, pgd_offset(mm, md->virtual), md->virtual);
if (WARN_ON(!pud))
return;
pmd_alloc(mm, pud, 0);
#endif
__create_mapping(mm, md, late_alloc, ng);
}
/*
* Create the architecture specific mappings
*/
void __init iotable_init(struct map_desc *io_desc, int nr)
{
struct map_desc *md;
struct vm_struct *vm;
struct static_vm *svm;
if (!nr)
return;
svm = early_alloc_aligned(sizeof(*svm) * nr, __alignof__(*svm));
for (md = io_desc; nr; md++, nr--) {
create_mapping(md);
vm = &svm->vm;
vm->addr = (void *)(md->virtual & PAGE_MASK);
vm->size = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
vm->phys_addr = __pfn_to_phys(md->pfn);
vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
vm->flags |= VM_ARM_MTYPE(md->type);
vm->caller = iotable_init;
add_static_vm_early(svm++);
}
}
void __init vm_reserve_area_early(unsigned long addr, unsigned long size,
void *caller)
{
struct vm_struct *vm;
struct static_vm *svm;
svm = early_alloc_aligned(sizeof(*svm), __alignof__(*svm));
vm = &svm->vm;
vm->addr = (void *)addr;
vm->size = size;
vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
vm->caller = caller;
add_static_vm_early(svm);
}
#ifndef CONFIG_ARM_LPAE
/*
* The Linux PMD is made of two consecutive section entries covering 2MB
* (see definition in include/asm/pgtable-2level.h). However a call to
* create_mapping() may optimize static mappings by using individual
* 1MB section mappings. This leaves the actual PMD potentially half
* initialized if the top or bottom section entry isn't used, leaving it
* open to problems if a subsequent ioremap() or vmalloc() tries to use
* the virtual space left free by that unused section entry.
*
* Let's avoid the issue by inserting dummy vm entries covering the unused
* PMD halves once the static mappings are in place.
*/
static void __init pmd_empty_section_gap(unsigned long addr)
{
vm_reserve_area_early(addr, SECTION_SIZE, pmd_empty_section_gap);
}
static void __init fill_pmd_gaps(void)
{
struct static_vm *svm;
struct vm_struct *vm;
unsigned long addr, next = 0;
pmd_t *pmd;
list_for_each_entry(svm, &static_vmlist, list) {
vm = &svm->vm;
addr = (unsigned long)vm->addr;
if (addr < next)
continue;
/*
* Check if this vm starts on an odd section boundary.
* If so and the first section entry for this PMD is free
* then we block the corresponding virtual address.
*/
if ((addr & ~PMD_MASK) == SECTION_SIZE) {
pmd = pmd_off_k(addr);
if (pmd_none(*pmd))
pmd_empty_section_gap(addr & PMD_MASK);
}
/*
* Then check if this vm ends on an odd section boundary.
* If so and the second section entry for this PMD is empty
* then we block the corresponding virtual address.
*/
addr += vm->size;
if ((addr & ~PMD_MASK) == SECTION_SIZE) {
pmd = pmd_off_k(addr) + 1;
if (pmd_none(*pmd))
pmd_empty_section_gap(addr);
}
/* no need to look at any vm entry until we hit the next PMD */
next = (addr + PMD_SIZE - 1) & PMD_MASK;
}
}
#else
#define fill_pmd_gaps() do { } while (0)
#endif
#if defined(CONFIG_PCI) && !defined(CONFIG_NEED_MACH_IO_H)
static void __init pci_reserve_io(void)
{
struct static_vm *svm;
svm = find_static_vm_vaddr((void *)PCI_IO_VIRT_BASE);
if (svm)
return;
vm_reserve_area_early(PCI_IO_VIRT_BASE, SZ_2M, pci_reserve_io);
}
#else
#define pci_reserve_io() do { } while (0)
#endif
#ifdef CONFIG_DEBUG_LL
void __init debug_ll_io_init(void)
{
struct map_desc map;
debug_ll_addr(&map.pfn, &map.virtual);
if (!map.pfn || !map.virtual)
return;
map.pfn = __phys_to_pfn(map.pfn);
map.virtual &= PAGE_MASK;
map.length = PAGE_SIZE;
map.type = MT_DEVICE;
ARM: 7781/1: mmu: Add debug_ll_io_init() mappings to early mappings Failure to add the mapping created in debug_ll_io_init() can lead to the BUG_ON() triggering in lib/ioremap.c:27 if the static virtual address decided for the debug_ll mapping overlaps with another mapping that is created later. This happens because the generic ioremap code has no idea there is a mapping there and it tries to place a mapping in the same location and blows up when it sees that there is a pte already present. kernel BUG at lib/ioremap.c:27! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc2-00042-g2af0c67-dirty #316 task: ef088000 ti: ef082000 task.ti: ef082000 PC is at ioremap_page_range+0x16c/0x198 LR is at ioremap_page_range+0xf0/0x198 pc : [<c04cb874>] lr : [<c04cb7f8>] psr: 20000113 sp : ef083e78 ip : af140000 fp : ef083ebc r10: ef7fc100 r9 : ef7fc104 r8 : 000af174 r7 : 00000647 r6 : beffffff r5 : f004c000 r4 : f0040000 r3 : af173417 r2 : 16440653 r1 : af173e07 r0 : ef7fc8fc Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 8020406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xef082238) Stack: (0xef083e78 to 0xef084000) 3e60: 00040000 ef083eec 3e80: bf134000 f004bfff c0207c00 f004c000 c02fc120 f000c000 c15e7800 00040000 3ea0: ef083eec 00000647 c098ba9c c0953544 ef083edc ef083ec0 c021b82c c04cb714 3ec0: c09cdc50 00000040 ef0f1e00 ef1003c0 ef083f14 ef083ee0 c09535bc c021b7bc 3ee0: c0953544 c04d0c6c c094e2cc c1600be4 c07440c4 c09a6888 00000002 c0a15f00 3f00: ef082000 00000000 ef083f54 ef083f18 c0208728 c0953550 00000002 c1600bfc 3f20: c08e3fac c0839918 ef083f54 c1600b80 c09a6888 c0a15f00 0000008b c094e2cc 3f40: c098ba9c c098bab8 ef083f94 ef083f58 c094ea0c c020865c 00000002 00000002 3f60: c094e2cc 00000000 c025b674 00000000 c06ff860 00000000 00000000 00000000 3f80: 00000000 00000000 ef083fac ef083f98 c06ff878 c094e910 00000000 00000000 3fa0: 00000000 ef083fb0 c020efe8 c06ff86c 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 c0595108 [<c04cb874>] (ioremap_page_range+0x16c/0x198) from [<c021b82c>] (__alloc_remap_buffer.isra.18+0x7c/0xc4) [<c021b82c>] (__alloc_remap_buffer.isra.18+0x7c/0xc4) from [<c09535bc>] (atomic_pool_init+0x78/0x128) [<c09535bc>] (atomic_pool_init+0x78/0x128) from [<c0208728>] (do_one_initcall+0xd8/0x198) [<c0208728>] (do_one_initcall+0xd8/0x198) from [<c094ea0c>] (kernel_init_freeable+0x108/0x1d0) [<c094ea0c>] (kernel_init_freeable+0x108/0x1d0) from [<c06ff878>] (kernel_init+0x18/0xf4) [<c06ff878>] (kernel_init+0x18/0xf4) from [<c020efe8>] (ret_from_fork+0x14/0x20) Code: e50b0040 ebf54b2f e51b0040 eaffffee (e7f001f2) Fix it by telling generic layers about the static mapping via iotable_init(). This also has the nice side effect of letting you see the mapping in procfs' vmallocinfo file. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-06 03:25:51 +04:00
iotable_init(&map, 1);
}
#endif
static void * __initdata vmalloc_min =
(void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET);
/*
* vmalloc=size forces the vmalloc area to be exactly 'size'
* bytes. This can be used to increase (or decrease) the vmalloc
* area - the default is 240m.
*/
static int __init early_vmalloc(char *arg)
{
unsigned long vmalloc_reserve = memparse(arg, NULL);
if (vmalloc_reserve < SZ_16M) {
vmalloc_reserve = SZ_16M;
pr_warn("vmalloc area too small, limiting to %luMB\n",
vmalloc_reserve >> 20);
}
if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
pr_warn("vmalloc area is too big, limiting to %luMB\n",
vmalloc_reserve >> 20);
}
vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
return 0;
}
early_param("vmalloc", early_vmalloc);
phys_addr_t arm_lowmem_limit __initdata = 0;
void __init sanity_check_meminfo(void)
{
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
phys_addr_t memblock_limit = 0;
int highmem = 0;
phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1;
struct memblock_region *reg;
bool should_use_highmem = false;
for_each_memblock(memory, reg) {
phys_addr_t block_start = reg->base;
phys_addr_t block_end = reg->base + reg->size;
phys_addr_t size_limit = reg->size;
if (reg->base >= vmalloc_limit)
highmem = 1;
else
size_limit = vmalloc_limit - reg->base;
if (!IS_ENABLED(CONFIG_HIGHMEM) || cache_is_vipt_aliasing()) {
if (highmem) {
pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n",
&block_start, &block_end);
memblock_remove(reg->base, reg->size);
should_use_highmem = true;
continue;
}
if (reg->size > size_limit) {
phys_addr_t overlap_size = reg->size - size_limit;
pr_notice("Truncating RAM at %pa-%pa to -%pa",
&block_start, &block_end, &vmalloc_limit);
memblock_remove(vmalloc_limit, overlap_size);
block_end = vmalloc_limit;
should_use_highmem = true;
}
}
if (!highmem) {
if (block_end > arm_lowmem_limit) {
if (reg->size > size_limit)
arm_lowmem_limit = vmalloc_limit;
else
arm_lowmem_limit = block_end;
}
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
/*
2015-05-13 17:07:54 +03:00
* Find the first non-pmd-aligned page, and point
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
* memblock_limit at it. This relies on rounding the
2015-05-13 17:07:54 +03:00
* limit down to be pmd-aligned, which happens at the
* end of this function.
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
*
* With this algorithm, the start or end of almost any
2015-05-13 17:07:54 +03:00
* bank can be non-pmd-aligned. The only exception is
* that the start of the bank 0 must be section-
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
* aligned, since otherwise memory would need to be
* allocated when mapping the start of bank 0, which
* occurs before any free memory is mapped.
*/
if (!memblock_limit) {
2015-05-13 17:07:54 +03:00
if (!IS_ALIGNED(block_start, PMD_SIZE))
memblock_limit = block_start;
2015-05-13 17:07:54 +03:00
else if (!IS_ALIGNED(block_end, PMD_SIZE))
memblock_limit = arm_lowmem_limit;
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
}
ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast We suffer an unfortunate combination of "features" which makes highmem support on platforms without hardware TLB maintainence broadcast difficult: - we need kmap_high_get() support for DMA cache coherence - this requires kmap_high() to take a spinlock with IRQs disabled - kmap_high() occasionally calls flush_all_zero_pkmaps() to clear out old mappings - flush_all_zero_pkmaps() calls flush_tlb_kernel_range(), which on s/w IPI'd systems eventually calls smp_call_function_many() - smp_call_function_many() must not be called with IRQs disabled: WARNING: at kernel/smp.c:380 smp_call_function_many+0xc4/0x240() Modules linked in: Backtrace: [<c00306f0>] (dump_backtrace+0x0/0x108) from [<c0286e6c>] (dump_stack+0x18/0x1c) r6:c007cd18 r5:c02ff228 r4:0000017c [<c0286e54>] (dump_stack+0x0/0x1c) from [<c0053e08>] (warn_slowpath_common+0x50/0x80) [<c0053db8>] (warn_slowpath_common+0x0/0x80) from [<c0053e50>] (warn_slowpath_null+0x18/0x1c) r7:00000003 r6:00000001 r5:c1ff4000 r4:c035fa34 [<c0053e38>] (warn_slowpath_null+0x0/0x1c) from [<c007cd18>] (smp_call_function_many+0xc4/0x240) [<c007cc54>] (smp_call_function_many+0x0/0x240) from [<c007cec0>] (smp_call_function+0x2c/0x38) [<c007ce94>] (smp_call_function+0x0/0x38) from [<c005980c>] (on_each_cpu+0x1c/0x38) [<c00597f0>] (on_each_cpu+0x0/0x38) from [<c0031788>] (flush_tlb_kernel_range+0x50/0x58) r6:00000001 r5:00000800 r4:c05f3590 [<c0031738>] (flush_tlb_kernel_range+0x0/0x58) from [<c009c600>] (flush_all_zero_pkmaps+0xc0/0xe8) [<c009c540>] (flush_all_zero_pkmaps+0x0/0xe8) from [<c009c6b4>] (kmap_high+0x8c/0x1e0) [<c009c628>] (kmap_high+0x0/0x1e0) from [<c00364a8>] (kmap+0x44/0x5c) [<c0036464>] (kmap+0x0/0x5c) from [<c0109dfc>] (cramfs_readpage+0x3c/0x194) [<c0109dc0>] (cramfs_readpage+0x0/0x194) from [<c0090c14>] (__do_page_cache_readahead+0x1f0/0x290) [<c0090a24>] (__do_page_cache_readahead+0x0/0x290) from [<c0090ce4>] (ra_submit+0x30/0x38) [<c0090cb4>] (ra_submit+0x0/0x38) from [<c0089384>] (filemap_fault+0x3dc/0x438) r4:c1819988 [<c0088fa8>] (filemap_fault+0x0/0x438) from [<c009d21c>] (__do_fault+0x58/0x43c) [<c009d1c4>] (__do_fault+0x0/0x43c) from [<c009e8cc>] (handle_mm_fault+0x104/0x318) [<c009e7c8>] (handle_mm_fault+0x0/0x318) from [<c0033c98>] (do_page_fault+0x188/0x1e4) [<c0033b10>] (do_page_fault+0x0/0x1e4) from [<c0033ddc>] (do_translation_fault+0x7c/0x84) [<c0033d60>] (do_translation_fault+0x0/0x84) from [<c002b474>] (do_DataAbort+0x40/0xa4) r8:c1ff5e20 r7:c0340120 r6:00000805 r5:c1ff5e54 r4:c03400d0 [<c002b434>] (do_DataAbort+0x0/0xa4) from [<c002bcac>] (__dabt_svc+0x4c/0x60) ... So we disable highmem support on these systems. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-27 23:55:43 +04:00
}
}
if (should_use_highmem)
pr_notice("Consider using a HIGHMEM enabled kernel.\n");
high_memory = __va(arm_lowmem_limit - 1) + 1;
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
/*
2015-05-13 17:07:54 +03:00
* Round the memblock limit down to a pmd size. This
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
* helps to ensure that we will allocate memory from the
2015-05-13 17:07:54 +03:00
* last full pmd, which should be mapped.
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
*/
if (memblock_limit)
2015-05-13 17:07:54 +03:00
memblock_limit = round_down(memblock_limit, PMD_SIZE);
ARM: 7785/1: mm: restrict early_alloc to section-aligned memory When map_lowmem() runs, and processes a memory bank whose start or end is not section-aligned, memory must be allocated to store the 2nd-level page tables. Those allocations are made by calling memblock_alloc(). At this point, the only memory that is free *and* mapped is memory which has already been mapped by map_lowmem() itself. For this reason, we must calculate the first point at which map_lowmem() will need to allocate memory, and set the memblock allocation limit to a lower address, so that memblock_alloc() is guaranteed to return memory that is already mapped. This patch enhances sanity_check_meminfo() to calculate that memory address, and pass it to memblock_set_current_limit(), rather than just assuming the limit is arm_lowmem_limit. The algorithm applied is: * Default memblock_limit to arm_lowmem_limit in the absence of any other limit; arm_lowmem_limit is the highest memory that is mapped by map_lowmem(). * While walking the list of memblocks, if the start of a block is not aligned, 2nd-level page tables will need to be allocated to map the first few pages of the block. Hence, the memblock_limit must be before the start of the block. * Similarly, if the end of any block is not aligned, 2nd-level page tables will need to be allocated to map the last few pages of the block. Hence, the memblock_limit must point at the end of the block, rounded down to section-alignment. * The memory blocks are assumed to be sorted in address order, so the first unaligned block start or end is used to set the limit. With this algorithm, the start or end of almost any bank can be non- section-aligned. The only exception is that the start of bank 0 must be section-aligned, since otherwise memory would need to be allocated when mapping the start of bank 0, which occurs before any free memory is mapped. [swarren, wrote commit description, rewrote calculation of memblock_limit] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-17 20:53:04 +04:00
if (!memblock_limit)
memblock_limit = arm_lowmem_limit;
memblock_set_current_limit(memblock_limit);
}
static inline void prepare_page_table(void)
{
unsigned long addr;
phys_addr_t end;
/*
* Clear out all the mappings below the kernel image.
*/
for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
/* The XIP kernel is mapped in the module area -- skip over it */
addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
#endif
for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*
* Find the end of the first block of lowmem.
*/
end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
if (end >= arm_lowmem_limit)
end = arm_lowmem_limit;
/*
* Clear out all the kernel space mappings, except for the first
* memory bank, up to the vmalloc region.
*/
for (addr = __phys_to_virt(end);
addr < VMALLOC_START; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
}
#ifdef CONFIG_ARM_LPAE
/* the first page is reserved for pgd */
#define SWAPPER_PG_DIR_SIZE (PAGE_SIZE + \
PTRS_PER_PGD * PTRS_PER_PMD * sizeof(pmd_t))
#else
#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
#endif
/*
* Reserve the special regions of memory
*/
void __init arm_mm_memblock_reserve(void)
{
/*
* Reserve the page tables. These are already in use,
* and can only be in node 0.
*/
memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our
* precious DMA-able memory...
*/
memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
#endif
}
/*
* Set up the device mappings. Since we clear out the page tables for all
* mappings above VMALLOC_START, except early fixmap, we might remove debug
* device mappings. This means earlycon can be used to debug this function
* Any other function or debugging method which may touch any device _will_
* crash the kernel.
*/
static void __init devicemaps_init(const struct machine_desc *mdesc)
{
struct map_desc map;
unsigned long addr;
void *vectors;
/*
* Allocate the vector page early.
*/
vectors = early_alloc(PAGE_SIZE * 2);
early_trap_init(vectors);
/*
* Clear page table except top pmd used by early fixmaps
*/
for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*
* Map the kernel if it is XIP.
* It is always first in the modulearea.
*/
#ifdef CONFIG_XIP_KERNEL
map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
map.virtual = MODULES_VADDR;
map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
map.type = MT_ROM;
create_mapping(&map);
#endif
/*
* Map the cache flushing regions.
*/
#ifdef FLUSH_BASE
map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
map.virtual = FLUSH_BASE;
map.length = SZ_1M;
map.type = MT_CACHECLEAN;
create_mapping(&map);
#endif
#ifdef FLUSH_BASE_MINICACHE
map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + SZ_1M);
map.virtual = FLUSH_BASE_MINICACHE;
map.length = SZ_1M;
map.type = MT_MINICLEAN;
create_mapping(&map);
#endif
/*
* Create a mapping for the machine vectors at the high-vectors
* location (0xffff0000). If we aren't using high-vectors, also
* create a mapping at the low-vectors virtual address.
*/
map.pfn = __phys_to_pfn(virt_to_phys(vectors));
map.virtual = 0xffff0000;
map.length = PAGE_SIZE;
#ifdef CONFIG_KUSER_HELPERS
map.type = MT_HIGH_VECTORS;
#else
map.type = MT_LOW_VECTORS;
#endif
create_mapping(&map);
if (!vectors_high()) {
map.virtual = 0;
map.length = PAGE_SIZE * 2;
map.type = MT_LOW_VECTORS;
create_mapping(&map);
}
/* Now create a kernel read-only mapping */
map.pfn += 1;
map.virtual = 0xffff0000 + PAGE_SIZE;
map.length = PAGE_SIZE;
map.type = MT_LOW_VECTORS;
create_mapping(&map);
/*
* Ask the machine support to map in the statically mapped devices.
*/
if (mdesc->map_io)
mdesc->map_io();
else
debug_ll_io_init();
fill_pmd_gaps();
/* Reserve fixed i/o space in VMALLOC region */
pci_reserve_io();
/*
* Finally flush the caches and tlb to ensure that we're in a
* consistent state wrt the writebuffer. This also ensures that
* any write-allocated cache lines in the vector page are written
* back. After this point, we can start to touch devices again.
*/
local_flush_tlb_all();
flush_cache_all();
/* Enable asynchronous aborts */
early_abt_enable();
}
static void __init kmap_init(void)
{
#ifdef CONFIG_HIGHMEM
pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE),
PKMAP_BASE, _PAGE_KERNEL_TABLE);
#endif
early_pte_alloc(pmd_off_k(FIXADDR_START), FIXADDR_START,
_PAGE_KERNEL_TABLE);
}
static void __init map_lowmem(void)
{
struct memblock_region *reg;
phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
/* Map all the lowmem memory banks. */
for_each_memblock(memory, reg) {
phys_addr_t start = reg->base;
phys_addr_t end = start + reg->size;
struct map_desc map;
if (memblock_is_nomap(reg))
continue;
if (end > arm_lowmem_limit)
end = arm_lowmem_limit;
if (start >= end)
break;
if (end < kernel_x_start) {
map.pfn = __phys_to_pfn(start);
map.virtual = __phys_to_virt(start);
map.length = end - start;
map.type = MT_MEMORY_RWX;
create_mapping(&map);
} else if (start >= kernel_x_end) {
map.pfn = __phys_to_pfn(start);
map.virtual = __phys_to_virt(start);
map.length = end - start;
map.type = MT_MEMORY_RW;
create_mapping(&map);
} else {
/* This better cover the entire kernel */
if (start < kernel_x_start) {
map.pfn = __phys_to_pfn(start);
map.virtual = __phys_to_virt(start);
map.length = kernel_x_start - start;
map.type = MT_MEMORY_RW;
create_mapping(&map);
}
map.pfn = __phys_to_pfn(kernel_x_start);
map.virtual = __phys_to_virt(kernel_x_start);
map.length = kernel_x_end - kernel_x_start;
map.type = MT_MEMORY_RWX;
create_mapping(&map);
if (kernel_x_end < end) {
map.pfn = __phys_to_pfn(kernel_x_end);
map.virtual = __phys_to_virt(kernel_x_end);
map.length = end - kernel_x_end;
map.type = MT_MEMORY_RW;
create_mapping(&map);
}
}
}
}
#ifdef CONFIG_ARM_PV_FIXUP
extern unsigned long __atags_pointer;
typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata);
pgtables_remap lpae_pgtables_remap_asm;
/*
* early_paging_init() recreates boot time page table setup, allowing machines
* to switch over to a high (>4G) address space on LPAE systems
*/
void __init early_paging_init(const struct machine_desc *mdesc)
{
pgtables_remap *lpae_pgtables_remap;
unsigned long pa_pgd;
unsigned int cr, ttbcr;
long long offset;
void *boot_data;
if (!mdesc->pv_fixup)
return;
offset = mdesc->pv_fixup();
if (offset == 0)
return;
/*
* Get the address of the remap function in the 1:1 identity
* mapping setup by the early page table assembly code. We
* must get this prior to the pv update. The following barrier
* ensures that this is complete before we fixup any P:V offsets.
*/
lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm);
pa_pgd = __pa(swapper_pg_dir);
boot_data = __va(__atags_pointer);
barrier();
pr_info("Switching physical address space to 0x%08llx\n",
(u64)PHYS_OFFSET + offset);
/* Re-set the phys pfn offset, and the pv offset */
__pv_offset += offset;
__pv_phys_pfn_offset += PFN_DOWN(offset);
/* Run the patch stub to update the constants */
fixup_pv_table(&__pv_table_begin,
(&__pv_table_end - &__pv_table_begin) << 2);
/*
* We changing not only the virtual to physical mapping, but also
* the physical addresses used to access memory. We need to flush
* all levels of cache in the system with caching disabled to
* ensure that all data is written back, and nothing is prefetched
* into the caches. We also need to prevent the TLB walkers
* allocating into the caches too. Note that this is ARMv7 LPAE
* specific.
*/
cr = get_cr();
set_cr(cr & ~(CR_I | CR_C));
asm("mrc p15, 0, %0, c2, c0, 2" : "=r" (ttbcr));
asm volatile("mcr p15, 0, %0, c2, c0, 2"
: : "r" (ttbcr & ~(3 << 8 | 3 << 10)));
flush_cache_all();
/*
* Fixup the page tables - this must be in the idmap region as
* we need to disable the MMU to do this safely, and hence it
* needs to be assembly. It's fairly simple, as we're using the
* temporary tables setup by the initial assembly code.
*/
lpae_pgtables_remap(offset, pa_pgd, boot_data);
/* Re-enable the caches and cacheable TLB walks */
asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr));
set_cr(cr);
}
#else
void __init early_paging_init(const struct machine_desc *mdesc)
{
long long offset;
if (!mdesc->pv_fixup)
return;
offset = mdesc->pv_fixup();
if (offset == 0)
return;
pr_crit("Physical address space modification is only to support Keystone2.\n");
pr_crit("Please enable ARM_LPAE and ARM_PATCH_PHYS_VIRT support to use this\n");
pr_crit("feature. Your kernel may crash now, have a good day.\n");
add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK);
}
#endif
static void __init early_fixmap_shutdown(void)
{
int i;
unsigned long va = fix_to_virt(__end_of_permanent_fixed_addresses - 1);
pte_offset_fixmap = pte_offset_late_fixmap;
pmd_clear(fixmap_pmd(va));
local_flush_tlb_kernel_page(va);
for (i = 0; i < __end_of_permanent_fixed_addresses; i++) {
pte_t *pte;
struct map_desc map;
map.virtual = fix_to_virt(i);
pte = pte_offset_early_fixmap(pmd_off_k(map.virtual), map.virtual);
/* Only i/o device mappings are supported ATM */
if (pte_none(*pte) ||
(pte_val(*pte) & L_PTE_MT_MASK) != L_PTE_MT_DEV_SHARED)
continue;
map.pfn = pte_pfn(*pte);
map.type = MT_DEVICE;
map.length = PAGE_SIZE;
create_mapping(&map);
}
}
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
void __init paging_init(const struct machine_desc *mdesc)
{
void *zero_page;
build_mem_type_table();
prepare_page_table();
map_lowmem();
memblock_set_current_limit(arm_lowmem_limit);
dma_contiguous_remap();
early_fixmap_shutdown();
devicemaps_init(mdesc);
kmap_init();
tcm_init();
top_pmd = pmd_off_k(0xffff0000);
/* allocate the zero page. */
zero_page = early_alloc(PAGE_SIZE);
bootmem_init();
empty_zero_page = virt_to_page(zero_page);
__flush_dcache_page(NULL, empty_zero_page);
}