microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/scsi/ips.c

7104 строки
231 KiB
C
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*****************************************************************************/
/* ips.c -- driver for the Adaptec / IBM ServeRAID controller */
/* */
/* Written By: Keith Mitchell, IBM Corporation */
/* Jack Hammer, Adaptec, Inc. */
/* David Jeffery, Adaptec, Inc. */
/* */
/* Copyright (C) 2000 IBM Corporation */
/* Copyright (C) 2002,2003 Adaptec, Inc. */
/* */
/* This program is free software; you can redistribute it and/or modify */
/* it under the terms of the GNU General Public License as published by */
/* the Free Software Foundation; either version 2 of the License, or */
/* (at your option) any later version. */
/* */
/* This program is distributed in the hope that it will be useful, */
/* but WITHOUT ANY WARRANTY; without even the implied warranty of */
/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the */
/* GNU General Public License for more details. */
/* */
/* NO WARRANTY */
/* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR */
/* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT */
/* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, */
/* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is */
/* solely responsible for determining the appropriateness of using and */
/* distributing the Program and assumes all risks associated with its */
/* exercise of rights under this Agreement, including but not limited to */
/* the risks and costs of program errors, damage to or loss of data, */
/* programs or equipment, and unavailability or interruption of operations. */
/* */
/* DISCLAIMER OF LIABILITY */
/* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY */
/* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL */
/* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND */
/* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR */
/* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE */
/* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED */
/* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES */
/* */
/* You should have received a copy of the GNU General Public License */
/* along with this program; if not, write to the Free Software */
/* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */
/* */
/* Bugs/Comments/Suggestions about this driver should be mailed to: */
/* ipslinux@adaptec.com */
/* */
/* For system support issues, contact your local IBM Customer support. */
/* Directions to find IBM Customer Support for each country can be found at: */
/* http://www.ibm.com/planetwide/ */
/* */
/*****************************************************************************/
/*****************************************************************************/
/* Change Log */
/* */
/* 0.99.02 - Breakup commands that are bigger than 8 * the stripe size */
/* 0.99.03 - Make interrupt routine handle all completed request on the */
/* adapter not just the first one */
/* - Make sure passthru commands get woken up if we run out of */
/* SCBs */
/* - Send all of the commands on the queue at once rather than */
/* one at a time since the card will support it. */
/* 0.99.04 - Fix race condition in the passthru mechanism -- this required */
/* the interface to the utilities to change */
/* - Fix error recovery code */
/* 0.99.05 - Fix an oops when we get certain passthru commands */
/* 1.00.00 - Initial Public Release */
/* Functionally equivalent to 0.99.05 */
/* 3.60.00 - Bump max commands to 128 for use with firmware 3.60 */
/* - Change version to 3.60 to coincide with release numbering. */
/* 3.60.01 - Remove bogus error check in passthru routine */
/* 3.60.02 - Make DCDB direction based on lookup table */
/* - Only allow one DCDB command to a SCSI ID at a time */
/* 4.00.00 - Add support for ServeRAID 4 */
/* 4.00.01 - Add support for First Failure Data Capture */
/* 4.00.02 - Fix problem with PT DCDB with no buffer */
/* 4.00.03 - Add alternative passthru interface */
/* - Add ability to flash BIOS */
/* 4.00.04 - Rename structures/constants to be prefixed with IPS_ */
/* 4.00.05 - Remove wish_block from init routine */
/* - Use linux/spinlock.h instead of asm/spinlock.h for kernels */
/* 2.3.18 and later */
/* - Sync with other changes from the 2.3 kernels */
/* 4.00.06 - Fix timeout with initial FFDC command */
/* 4.00.06a - Port to 2.4 (trivial) -- Christoph Hellwig <hch@infradead.org> */
/* 4.10.00 - Add support for ServeRAID 4M/4L */
/* 4.10.13 - Fix for dynamic unload and proc file system */
/* 4.20.03 - Rename version to coincide with new release schedules */
/* Performance fixes */
/* Fix truncation of /proc files with cat */
/* Merge in changes through kernel 2.4.0test1ac21 */
/* 4.20.13 - Fix some failure cases / reset code */
/* - Hook into the reboot_notifier to flush the controller cache */
/* 4.50.01 - Fix problem when there is a hole in logical drive numbering */
/* 4.70.09 - Use a Common ( Large Buffer ) for Flashing from the JCRM CD */
/* - Add IPSSEND Flash Support */
/* - Set Sense Data for Unknown SCSI Command */
/* - Use Slot Number from NVRAM Page 5 */
/* - Restore caller's DCDB Structure */
/* 4.70.12 - Corrective actions for bad controller ( during initialization )*/
/* 4.70.13 - Don't Send CDB's if we already know the device is not present */
/* - Don't release HA Lock in ips_next() until SC taken off queue */
/* - Unregister SCSI device in ips_release() */
/* 4.70.15 - Fix Breakup for very large ( non-SG ) requests in ips_done() */
/* 4.71.00 - Change all memory allocations to not use GFP_DMA flag */
/* Code Clean-Up for 2.4.x kernel */
/* 4.72.00 - Allow for a Scatter-Gather Element to exceed MAX_XFER Size */
/* 4.72.01 - I/O Mapped Memory release ( so "insmod ips" does not Fail ) */
/* - Don't Issue Internal FFDC Command if there are Active Commands */
/* - Close Window for getting too many IOCTL's active */
/* 4.80.00 - Make ia64 Safe */
/* 4.80.04 - Eliminate calls to strtok() if 2.4.x or greater */
/* - Adjustments to Device Queue Depth */
/* 4.80.14 - Take all semaphores off stack */
/* - Clean Up New_IOCTL path */
/* 4.80.20 - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel ) */
/* - 5 second delay needed after resetting an i960 adapter */
/* 4.80.26 - Clean up potential code problems ( Arjan's recommendations ) */
/* 4.90.01 - Version Matching for FirmWare, BIOS, and Driver */
/* 4.90.05 - Use New PCI Architecture to facilitate Hot Plug Development */
/* 4.90.08 - Increase Delays in Flashing ( Trombone Only - 4H ) */
/* 4.90.08 - Data Corruption if First Scatter Gather Element is > 64K */
/* 4.90.11 - Don't actually RESET unless it's physically required */
/* - Remove unused compile options */
/* 5.00.01 - Sarasota ( 5i ) adapters must always be scanned first */
/* - Get rid on IOCTL_NEW_COMMAND code */
/* - Add Extended DCDB Commands for Tape Support in 5I */
/* 5.10.12 - use pci_dma interfaces, update for 2.5 kernel changes */
/* 5.10.15 - remove unused code (sem, macros, etc.) */
/* 5.30.00 - use __devexit_p() */
/* 6.00.00 - Add 6x Adapters and Battery Flash */
/* 6.10.00 - Remove 1G Addressing Limitations */
/* 6.11.xx - Get VersionInfo buffer off the stack ! DDTS 60401 */
/* 6.11.xx - Make Logical Drive Info structure safe for DMA DDTS 60639 */
[SCSI] ServeRAID V7.12.02 I am resubmitting the 2.6 kernel patch for the Version 7.12.02 ips driver. I have eliminated a couple of inappropriate changes pointed out by Arjan. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-26 18:20:33 +04:00
/* 7.10.18 - Add highmem_io flag in SCSI Templete for 2.4 kernels */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* - Fix path/name for scsi_hosts.h include for 2.6 kernels */
/* - Fix sort order of 7k */
/* - Remove 3 unused "inline" functions */
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 05:57:33 +04:00
/* 7.12.xx - Use STATIC functions wherever possible */
[SCSI] ServeRAID V7.12.02 I am resubmitting the 2.6 kernel patch for the Version 7.12.02 ips driver. I have eliminated a couple of inappropriate changes pointed out by Arjan. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-26 18:20:33 +04:00
/* - Clean up deprecated MODULE_PARM calls */
[SCSI] ips: remove "Version Matching" IBM has finally agreed that the "Version Matching" between firmware and drivers ( and the resulting warning messages ) is no longer necessary. This patch will remove those functions from the ServeRAID driver. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-03 17:46:00 +03:00
/* 7.12.05 - Remove Version Matching per IBM request */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*****************************************************************************/
/*
* Conditional Compilation directives for this driver:
*
* IPS_DEBUG - Turn on debugging info
*
* Parameters:
*
* debug:<number> - Set debug level to <number>
* NOTE: only works when IPS_DEBUG compile directive is used.
* 1 - Normal debug messages
* 2 - Verbose debug messages
* 11 - Method trace (non interrupt)
* 12 - Method trace (includes interrupt)
*
* noi2o - Don't use I2O Queues (ServeRAID 4 only)
* nommap - Don't use memory mapped I/O
* ioctlsize - Initial size of the IOCTL buffer
*/
#include <asm/io.h>
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/reboot.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/types.h>
[PATCH] Replace 0xff.. with correct DMA_xBIT_MASK Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 13:56:48 +04:00
#include <linux/dma-mapping.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#include <scsi/sg.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "ips.h"
#include <linux/module.h>
#include <linux/stat.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/smp.h>
#ifdef MODULE
static char *ips = NULL;
module_param(ips, charp, 0);
#endif
/*
* DRIVER_VER
*/
[SCSI] ips: Update version information This patch just makes the version number in ips.c and ips.h consistent. It seems that this has been forgotten in a60768e2d43eb30a1adb8a119aeac35dc0d03ef6. It also removes code duplication, each number is now only once in the code to avoid similar errors in the future. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-09-22 23:55:19 +04:00
#define IPS_VERSION_HIGH IPS_VER_MAJOR_STRING "." IPS_VER_MINOR_STRING
#define IPS_VERSION_LOW "." IPS_VER_BUILD_STRING " "
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define IPS_DMA_DIR(scb) ((!scb->scsi_cmd || ips_is_passthru(scb->scsi_cmd) || \
[PATCH] remove old scsi data direction macros these have been wrappers for the generic dma direction bits since 2.5.x. This patch converts the few remaining drivers and removes the macros. Arjan noticed there's some hunk in here that shouldn't. Updated patch below: Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 00:26:13 +04:00
DMA_NONE == scb->scsi_cmd->sc_data_direction) ? \
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
DMA_BIDIRECTIONAL : \
[PATCH] remove old scsi data direction macros these have been wrappers for the generic dma direction bits since 2.5.x. This patch converts the few remaining drivers and removes the macros. Arjan noticed there's some hunk in here that shouldn't. Updated patch below: Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 00:26:13 +04:00
scb->scsi_cmd->sc_data_direction)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#ifdef IPS_DEBUG
#define METHOD_TRACE(s, i) if (ips_debug >= (i+10)) printk(KERN_NOTICE s "\n");
#define DEBUG(i, s) if (ips_debug >= i) printk(KERN_NOTICE s "\n");
#define DEBUG_VAR(i, s, v...) if (ips_debug >= i) printk(KERN_NOTICE s "\n", v);
#else
#define METHOD_TRACE(s, i)
#define DEBUG(i, s)
#define DEBUG_VAR(i, s, v...)
#endif
/*
* Function prototypes
*/
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
static int ips_eh_abort(struct scsi_cmnd *);
static int ips_eh_reset(struct scsi_cmnd *);
SCSI host lock push-down Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 10:10:29 +03:00
static int ips_queue(struct Scsi_Host *, struct scsi_cmnd *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static const char *ips_info(struct Scsi_Host *);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
static irqreturn_t do_ipsintr(int, void *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static int ips_hainit(ips_ha_t *);
static int ips_map_status(ips_ha_t *, ips_scb_t *, ips_stat_t *);
static int ips_send_wait(ips_ha_t *, ips_scb_t *, int, int);
static int ips_send_cmd(ips_ha_t *, ips_scb_t *);
static int ips_online(ips_ha_t *, ips_scb_t *);
static int ips_inquiry(ips_ha_t *, ips_scb_t *);
static int ips_rdcap(ips_ha_t *, ips_scb_t *);
static int ips_msense(ips_ha_t *, ips_scb_t *);
static int ips_reqsen(ips_ha_t *, ips_scb_t *);
static int ips_deallocatescbs(ips_ha_t *, int);
static int ips_allocatescbs(ips_ha_t *);
static int ips_reset_copperhead(ips_ha_t *);
static int ips_reset_copperhead_memio(ips_ha_t *);
static int ips_reset_morpheus(ips_ha_t *);
static int ips_issue_copperhead(ips_ha_t *, ips_scb_t *);
static int ips_issue_copperhead_memio(ips_ha_t *, ips_scb_t *);
static int ips_issue_i2o(ips_ha_t *, ips_scb_t *);
static int ips_issue_i2o_memio(ips_ha_t *, ips_scb_t *);
static int ips_isintr_copperhead(ips_ha_t *);
static int ips_isintr_copperhead_memio(ips_ha_t *);
static int ips_isintr_morpheus(ips_ha_t *);
static int ips_wait(ips_ha_t *, int, int);
static int ips_write_driver_status(ips_ha_t *, int);
static int ips_read_adapter_status(ips_ha_t *, int);
static int ips_read_subsystem_parameters(ips_ha_t *, int);
static int ips_read_config(ips_ha_t *, int);
static int ips_clear_adapter(ips_ha_t *, int);
static int ips_readwrite_page5(ips_ha_t *, int, int);
static int ips_init_copperhead(ips_ha_t *);
static int ips_init_copperhead_memio(ips_ha_t *);
static int ips_init_morpheus(ips_ha_t *);
static int ips_isinit_copperhead(ips_ha_t *);
static int ips_isinit_copperhead_memio(ips_ha_t *);
static int ips_isinit_morpheus(ips_ha_t *);
static int ips_erase_bios(ips_ha_t *);
static int ips_program_bios(ips_ha_t *, char *, uint32_t, uint32_t);
static int ips_verify_bios(ips_ha_t *, char *, uint32_t, uint32_t);
static int ips_erase_bios_memio(ips_ha_t *);
static int ips_program_bios_memio(ips_ha_t *, char *, uint32_t, uint32_t);
static int ips_verify_bios_memio(ips_ha_t *, char *, uint32_t, uint32_t);
static int ips_flash_copperhead(ips_ha_t *, ips_passthru_t *, ips_scb_t *);
static int ips_flash_bios(ips_ha_t *, ips_passthru_t *, ips_scb_t *);
static int ips_flash_firmware(ips_ha_t *, ips_passthru_t *, ips_scb_t *);
static void ips_free_flash_copperhead(ips_ha_t * ha);
static void ips_get_bios_version(ips_ha_t *, int);
static void ips_identify_controller(ips_ha_t *);
static void ips_chkstatus(ips_ha_t *, IPS_STATUS *);
static void ips_enable_int_copperhead(ips_ha_t *);
static void ips_enable_int_copperhead_memio(ips_ha_t *);
static void ips_enable_int_morpheus(ips_ha_t *);
static int ips_intr_copperhead(ips_ha_t *);
static int ips_intr_morpheus(ips_ha_t *);
static void ips_next(ips_ha_t *, int);
static void ipsintr_blocking(ips_ha_t *, struct ips_scb *);
static void ipsintr_done(ips_ha_t *, struct ips_scb *);
static void ips_done(ips_ha_t *, ips_scb_t *);
static void ips_free(ips_ha_t *);
static void ips_init_scb(ips_ha_t *, ips_scb_t *);
static void ips_freescb(ips_ha_t *, ips_scb_t *);
static void ips_setup_funclist(ips_ha_t *);
static void ips_statinit(ips_ha_t *);
static void ips_statinit_memio(ips_ha_t *);
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
static void ips_fix_ffdc_time(ips_ha_t *, ips_scb_t *, time64_t);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static void ips_ffdc_reset(ips_ha_t *, int);
static void ips_ffdc_time(ips_ha_t *);
static uint32_t ips_statupd_copperhead(ips_ha_t *);
static uint32_t ips_statupd_copperhead_memio(ips_ha_t *);
static uint32_t ips_statupd_morpheus(ips_ha_t *);
static ips_scb_t *ips_getscb(ips_ha_t *);
static void ips_putq_scb_head(ips_scb_queue_t *, ips_scb_t *);
sched/wait: Rename wait_queue_t => wait_queue_entry_t Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:13 +03:00
static void ips_putq_wait_tail(ips_wait_queue_entry_t *, struct scsi_cmnd *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static void ips_putq_copp_tail(ips_copp_queue_t *,
ips_copp_wait_item_t *);
static ips_scb_t *ips_removeq_scb_head(ips_scb_queue_t *);
static ips_scb_t *ips_removeq_scb(ips_scb_queue_t *, ips_scb_t *);
sched/wait: Rename wait_queue_t => wait_queue_entry_t Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:13 +03:00
static struct scsi_cmnd *ips_removeq_wait_head(ips_wait_queue_entry_t *);
static struct scsi_cmnd *ips_removeq_wait(ips_wait_queue_entry_t *,
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
struct scsi_cmnd *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static ips_copp_wait_item_t *ips_removeq_copp(ips_copp_queue_t *,
ips_copp_wait_item_t *);
static ips_copp_wait_item_t *ips_removeq_copp_head(ips_copp_queue_t *);
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
static int ips_is_passthru(struct scsi_cmnd *);
static int ips_make_passthru(ips_ha_t *, struct scsi_cmnd *, ips_scb_t *, int);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static int ips_usrcmd(ips_ha_t *, ips_passthru_t *, ips_scb_t *);
static void ips_cleanup_passthru(ips_ha_t *, ips_scb_t *);
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
static void ips_scmd_buf_write(struct scsi_cmnd * scmd, void *data,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
unsigned int count);
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
static void ips_scmd_buf_read(struct scsi_cmnd * scmd, void *data,
unsigned int count);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
static int ips_write_info(struct Scsi_Host *, char *, int);
static int ips_show_info(struct seq_file *, struct Scsi_Host *);
static int ips_host_info(ips_ha_t *, struct seq_file *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static int ips_abort_init(ips_ha_t * ha, int index);
static int ips_init_phase2(int index);
static int ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr);
static int ips_register_scsi(int index);
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
static int ips_poll_for_flush_complete(ips_ha_t * ha);
static void ips_flush_and_reset(ips_ha_t *ha);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* global variables
*/
static const char ips_name[] = "ips";
static struct Scsi_Host *ips_sh[IPS_MAX_ADAPTERS]; /* Array of host controller structures */
static ips_ha_t *ips_ha[IPS_MAX_ADAPTERS]; /* Array of HA structures */
static unsigned int ips_next_controller;
static unsigned int ips_num_controllers;
static unsigned int ips_released_controllers;
static int ips_hotplug;
static int ips_cmd_timeout = 60;
static int ips_reset_timeout = 60 * 5;
static int ips_force_memio = 1; /* Always use Memory Mapped I/O */
static int ips_force_i2o = 1; /* Always use I2O command delivery */
static int ips_ioctlsize = IPS_IOCTL_SIZE; /* Size of the ioctl buffer */
static int ips_cd_boot; /* Booting from Manager CD */
static char *ips_FlashData = NULL; /* CD Boot - Flash Data Buffer */
static dma_addr_t ips_flashbusaddr;
static long ips_FlashDataInUse; /* CD Boot - Flash Data In Use Flag */
static uint32_t MaxLiteCmds = 32; /* Max Active Cmds for a Lite Adapter */
[SCSI] remove Scsi_Host_Template typedef Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-31 20:31:40 +03:00
static struct scsi_host_template ips_driver_template = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
.info = ips_info,
.queuecommand = ips_queue,
.eh_abort_handler = ips_eh_abort,
.eh_host_reset_handler = ips_eh_reset,
.proc_name = "ips",
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
.show_info = ips_show_info,
.write_info = ips_write_info,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
.slave_configure = ips_slave_configure,
.bios_param = ips_biosparam,
.this_id = -1,
.sg_tablesize = IPS_MAX_SG,
.cmd_per_lun = 3,
[SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-23 14:25:40 +04:00
.no_write_same = 1,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
};
/* This table describes all ServeRAID Adapters */
static struct pci_device_id ips_pci_table[] = {
{ 0x1014, 0x002E, PCI_ANY_ID, PCI_ANY_ID, 0, 0 },
{ 0x1014, 0x01BD, PCI_ANY_ID, PCI_ANY_ID, 0, 0 },
{ 0x9005, 0x0250, PCI_ANY_ID, PCI_ANY_ID, 0, 0 },
{ 0, }
};
MODULE_DEVICE_TABLE( pci, ips_pci_table );
static char ips_hot_plug_name[] = "ips";
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
Drivers: scsi: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 01:08:55 +04:00
static int ips_insert_device(struct pci_dev *pci_dev, const struct pci_device_id *ent);
static void ips_remove_device(struct pci_dev *pci_dev);
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
static struct pci_driver ips_pci_driver = {
.name = ips_hot_plug_name,
.id_table = ips_pci_table,
.probe = ips_insert_device,
Drivers: scsi: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 01:08:55 +04:00
.remove = ips_remove_device,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
};
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Necessary forward function protoypes
*/
static int ips_halt(struct notifier_block *nb, ulong event, void *buf);
#define MAX_ADAPTER_NAME 15
static char ips_adapter_name[][30] = {
"ServeRAID",
"ServeRAID II",
"ServeRAID on motherboard",
"ServeRAID on motherboard",
"ServeRAID 3H",
"ServeRAID 3L",
"ServeRAID 4H",
"ServeRAID 4M",
"ServeRAID 4L",
"ServeRAID 4Mx",
"ServeRAID 4Lx",
"ServeRAID 5i",
"ServeRAID 5i",
"ServeRAID 6M",
"ServeRAID 6i",
"ServeRAID 7t",
"ServeRAID 7k",
"ServeRAID 7M"
};
static struct notifier_block ips_notifier = {
ips_halt, NULL, 0
};
/*
* Direction table
*/
static char ips_command_direction[] = {
IPS_DATA_NONE, IPS_DATA_NONE, IPS_DATA_IN, IPS_DATA_IN, IPS_DATA_OUT,
IPS_DATA_IN, IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_IN, IPS_DATA_UNK,
IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_IN, IPS_DATA_NONE, IPS_DATA_NONE, IPS_DATA_IN, IPS_DATA_OUT,
IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_NONE, IPS_DATA_NONE, IPS_DATA_OUT,
IPS_DATA_NONE, IPS_DATA_IN, IPS_DATA_NONE, IPS_DATA_IN, IPS_DATA_OUT,
IPS_DATA_NONE, IPS_DATA_UNK, IPS_DATA_IN, IPS_DATA_UNK, IPS_DATA_IN,
IPS_DATA_UNK, IPS_DATA_OUT, IPS_DATA_IN, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_IN, IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_NONE, IPS_DATA_UNK,
IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_OUT,
IPS_DATA_OUT, IPS_DATA_NONE, IPS_DATA_IN, IPS_DATA_NONE, IPS_DATA_NONE,
IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_OUT,
IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_OUT,
IPS_DATA_OUT, IPS_DATA_IN, IPS_DATA_IN, IPS_DATA_IN, IPS_DATA_NONE,
IPS_DATA_UNK, IPS_DATA_NONE, IPS_DATA_NONE, IPS_DATA_NONE, IPS_DATA_UNK,
IPS_DATA_NONE, IPS_DATA_OUT, IPS_DATA_IN, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_OUT, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_IN, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_NONE, IPS_DATA_NONE, IPS_DATA_UNK, IPS_DATA_IN, IPS_DATA_NONE,
IPS_DATA_OUT, IPS_DATA_UNK, IPS_DATA_NONE, IPS_DATA_UNK, IPS_DATA_OUT,
IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_OUT, IPS_DATA_NONE,
IPS_DATA_UNK, IPS_DATA_IN, IPS_DATA_OUT, IPS_DATA_IN, IPS_DATA_IN,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_OUT,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK,
IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK, IPS_DATA_UNK
};
/****************************************************************************/
/* */
/* Routine Name: ips_setup */
/* */
/* Routine Description: */
/* */
/* setup parameters to the driver */
/* */
/****************************************************************************/
static int
ips_setup(char *ips_str)
{
int i;
char *key;
char *value;
scsi: ips: make array 'options' static const, makes object smaller Don't populate the array 'options' on the stack but instead make it static const. Makes the object code smaller by 143 bytes. Before: text data bss dec hex filename 94483 11272 1184 106939 1a1bb drivers/scsi/ips.o After: text data bss dec hex filename 94244 11368 1184 106796 1a12c drivers/scsi/ips.o (gcc version 9.2.1, amd64) Link: https://lore.kernel.org/r/20190906164522.5644-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-06 19:45:22 +03:00
static const IPS_OPTION options[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{"noi2o", &ips_force_i2o, 0},
{"nommap", &ips_force_memio, 0},
{"ioctlsize", &ips_ioctlsize, IPS_IOCTL_SIZE},
{"cdboot", &ips_cd_boot, 0},
{"maxcmds", &MaxLiteCmds, 32},
};
/* Don't use strtok() anymore ( if 2.4 Kernel or beyond ) */
/* Search for value */
while ((key = strsep(&ips_str, ",."))) {
if (!*key)
continue;
value = strchr(key, ':');
if (value)
*value++ = '\0';
/*
* We now have key/value pairs.
* Update the variables
*/
[SCSI] drivers/scsi: Use ARRAY_SIZE macro Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of the macro. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-09 09:23:48 +04:00
for (i = 0; i < ARRAY_SIZE(options); i++) {
scsi: replace strnicmp with strncasecmp The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:54:44 +04:00
if (strncasecmp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
(key, options[i].option_name,
strlen(options[i].option_name)) == 0) {
if (value)
*options[i].option_flag =
simple_strtoul(value, NULL, 0);
else
*options[i].option_flag =
options[i].option_value;
break;
}
}
}
return (1);
}
__setup("ips=", ips_setup);
/****************************************************************************/
/* */
/* Routine Name: ips_detect */
/* */
/* Routine Description: */
/* */
/* Detect and initialize the driver */
/* */
/* NOTE: this routine is called under the io_request_lock spinlock */
/* */
/****************************************************************************/
static int
[SCSI] remove Scsi_Host_Template typedef Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-31 20:31:40 +03:00
ips_detect(struct scsi_host_template * SHT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
int i;
METHOD_TRACE("ips_detect", 1);
#ifdef MODULE
if (ips)
ips_setup(ips);
#endif
for (i = 0; i < ips_num_controllers; i++) {
if (ips_register_scsi(i))
ips_free(ips_ha[i]);
ips_released_controllers++;
}
ips_hotplug = 1;
return (ips_num_controllers);
}
/****************************************************************************/
/* configure the function pointers to use the functions that will work */
/* with the found version of the adapter */
/****************************************************************************/
static void
ips_setup_funclist(ips_ha_t * ha)
{
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
* Setup Functions
*/
if (IPS_IS_MORPHEUS(ha) || IPS_IS_MARCO(ha)) {
/* morpheus / marco / sebring */
ha->func.isintr = ips_isintr_morpheus;
ha->func.isinit = ips_isinit_morpheus;
ha->func.issue = ips_issue_i2o_memio;
ha->func.init = ips_init_morpheus;
ha->func.statupd = ips_statupd_morpheus;
ha->func.reset = ips_reset_morpheus;
ha->func.intr = ips_intr_morpheus;
ha->func.enableint = ips_enable_int_morpheus;
} else if (IPS_USE_MEMIO(ha)) {
/* copperhead w/MEMIO */
ha->func.isintr = ips_isintr_copperhead_memio;
ha->func.isinit = ips_isinit_copperhead_memio;
ha->func.init = ips_init_copperhead_memio;
ha->func.statupd = ips_statupd_copperhead_memio;
ha->func.statinit = ips_statinit_memio;
ha->func.reset = ips_reset_copperhead_memio;
ha->func.intr = ips_intr_copperhead;
ha->func.erasebios = ips_erase_bios_memio;
ha->func.programbios = ips_program_bios_memio;
ha->func.verifybios = ips_verify_bios_memio;
ha->func.enableint = ips_enable_int_copperhead_memio;
if (IPS_USE_I2O_DELIVER(ha))
ha->func.issue = ips_issue_i2o_memio;
else
ha->func.issue = ips_issue_copperhead_memio;
} else {
/* copperhead */
ha->func.isintr = ips_isintr_copperhead;
ha->func.isinit = ips_isinit_copperhead;
ha->func.init = ips_init_copperhead;
ha->func.statupd = ips_statupd_copperhead;
ha->func.statinit = ips_statinit;
ha->func.reset = ips_reset_copperhead;
ha->func.intr = ips_intr_copperhead;
ha->func.erasebios = ips_erase_bios;
ha->func.programbios = ips_program_bios;
ha->func.verifybios = ips_verify_bios;
ha->func.enableint = ips_enable_int_copperhead;
if (IPS_USE_I2O_DELIVER(ha))
ha->func.issue = ips_issue_i2o;
else
ha->func.issue = ips_issue_copperhead;
}
}
/****************************************************************************/
/* */
/* Routine Name: ips_release */
/* */
/* Routine Description: */
/* */
/* Remove a driver */
/* */
/****************************************************************************/
static int
ips_release(struct Scsi_Host *sh)
{
ips_scb_t *scb;
ips_ha_t *ha;
int i;
METHOD_TRACE("ips_release", 1);
[SCSI] ips: Close narrow race in release We were releasing the IRQ before removing the host, so commands could still be coming in which would never be seen by the interrupt handler. Just remove the host before releasing the IRQ to close this race. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 22:57:00 +04:00
scsi_remove_host(sh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
for (i = 0; i < IPS_MAX_ADAPTERS && ips_sh[i] != sh; i++) ;
if (i == IPS_MAX_ADAPTERS) {
printk(KERN_WARNING
"(%s) release, invalid Scsi_Host pointer.\n", ips_name);
BUG();
return (FALSE);
}
ha = IPS_HA(sh);
if (!ha)
return (FALSE);
/* flush the cache on the controller */
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_FLUSH;
scb->cmd.flush_cache.op_code = IPS_CMD_FLUSH;
scb->cmd.flush_cache.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.flush_cache.state = IPS_NORM_STATE;
scb->cmd.flush_cache.reserved = 0;
scb->cmd.flush_cache.reserved2 = 0;
scb->cmd.flush_cache.reserved3 = 0;
scb->cmd.flush_cache.reserved4 = 0;
IPS_PRINTK(KERN_WARNING, ha->pcidev, "Flushing Cache.\n");
/* send command */
if (ips_send_wait(ha, scb, ips_cmd_timeout, IPS_INTR_ON) == IPS_FAILURE)
IPS_PRINTK(KERN_WARNING, ha->pcidev, "Incomplete Flush.\n");
IPS_PRINTK(KERN_WARNING, ha->pcidev, "Flushing Complete.\n");
ips_sh[i] = NULL;
ips_ha[i] = NULL;
/* free extra memory */
ips_free(ha);
/* free IRQ */
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
free_irq(ha->pcidev->irq, ha);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scsi_host_put(sh);
ips_released_controllers++;
return (FALSE);
}
/****************************************************************************/
/* */
/* Routine Name: ips_halt */
/* */
/* Routine Description: */
/* */
/* Perform cleanup when the system reboots */
/* */
/****************************************************************************/
static int
ips_halt(struct notifier_block *nb, ulong event, void *buf)
{
ips_scb_t *scb;
ips_ha_t *ha;
int i;
if ((event != SYS_RESTART) && (event != SYS_HALT) &&
(event != SYS_POWER_OFF))
return (NOTIFY_DONE);
for (i = 0; i < ips_next_controller; i++) {
ha = (ips_ha_t *) ips_ha[i];
if (!ha)
continue;
if (!ha->active)
continue;
/* flush the cache on the controller */
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_FLUSH;
scb->cmd.flush_cache.op_code = IPS_CMD_FLUSH;
scb->cmd.flush_cache.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.flush_cache.state = IPS_NORM_STATE;
scb->cmd.flush_cache.reserved = 0;
scb->cmd.flush_cache.reserved2 = 0;
scb->cmd.flush_cache.reserved3 = 0;
scb->cmd.flush_cache.reserved4 = 0;
IPS_PRINTK(KERN_WARNING, ha->pcidev, "Flushing Cache.\n");
/* send command */
if (ips_send_wait(ha, scb, ips_cmd_timeout, IPS_INTR_ON) ==
IPS_FAILURE)
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Incomplete Flush.\n");
else
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Flushing Complete.\n");
}
return (NOTIFY_OK);
}
/****************************************************************************/
/* */
/* Routine Name: ips_eh_abort */
/* */
/* Routine Description: */
/* */
/* Abort a command (using the new error code stuff) */
/* Note: this routine is called under the io_request_lock */
/****************************************************************************/
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
int ips_eh_abort(struct scsi_cmnd *SC)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
ips_ha_t *ha;
ips_copp_wait_item_t *item;
int ret;
[SCSI] allow sleeping in ->eh_abort_handler() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-28 15:54:40 +04:00
struct Scsi_Host *host;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_eh_abort", 1);
if (!SC)
return (FAILED);
[SCSI] allow sleeping in ->eh_abort_handler() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-28 15:54:40 +04:00
host = SC->device->host;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha = (ips_ha_t *) SC->device->host->hostdata;
if (!ha)
return (FAILED);
if (!ha->active)
return (FAILED);
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_lock(host->host_lock);
[SCSI] allow sleeping in ->eh_abort_handler() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-28 15:54:40 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* See if the command is on the copp queue */
item = ha->copp_waitlist.head;
while ((item) && (item->scsi_cmd != SC))
item = item->next;
if (item) {
/* Found it */
ips_removeq_copp(&ha->copp_waitlist, item);
ret = (SUCCESS);
/* See if the command is on the wait queue */
} else if (ips_removeq_wait(&ha->scb_waitlist, SC)) {
/* command not sent yet */
ret = (SUCCESS);
} else {
/* command must have already been sent */
ret = (FAILED);
}
[SCSI] allow sleeping in ->eh_abort_handler() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-28 15:54:40 +04:00
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_unlock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return ret;
}
/****************************************************************************/
/* */
/* Routine Name: ips_eh_reset */
/* */
/* Routine Description: */
/* */
/* Reset the controller (with new eh error code) */
/* */
/* NOTE: this routine is called under the io_request_lock spinlock */
/* */
/****************************************************************************/
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
static int __ips_eh_reset(struct scsi_cmnd *SC)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
int ret;
int i;
ips_ha_t *ha;
ips_scb_t *scb;
ips_copp_wait_item_t *item;
METHOD_TRACE("ips_eh_reset", 1);
#ifdef NO_IPS_RESET
return (FAILED);
#else
if (!SC) {
DEBUG(1, "Reset called with NULL scsi command");
return (FAILED);
}
ha = (ips_ha_t *) SC->device->host->hostdata;
if (!ha) {
DEBUG(1, "Reset called with NULL ha struct");
return (FAILED);
}
if (!ha->active)
return (FAILED);
/* See if the command is on the copp queue */
item = ha->copp_waitlist.head;
while ((item) && (item->scsi_cmd != SC))
item = item->next;
if (item) {
/* Found it */
ips_removeq_copp(&ha->copp_waitlist, item);
return (SUCCESS);
}
/* See if the command is on the wait queue */
if (ips_removeq_wait(&ha->scb_waitlist, SC)) {
/* command not sent yet */
return (SUCCESS);
}
/* An explanation for the casual observer: */
/* Part of the function of a RAID controller is automatic error */
/* detection and recovery. As such, the only problem that physically */
/* resetting an adapter will ever fix is when, for some reason, */
/* the driver is not successfully communicating with the adapter. */
/* Therefore, we will attempt to flush this adapter. If that succeeds, */
/* then there's no real purpose in a physical reset. This will complete */
/* much faster and avoids any problems that might be caused by a */
/* physical reset ( such as having to fail all the outstanding I/O's ). */
if (ha->ioctl_reset == 0) { /* IF Not an IOCTL Requested Reset */
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_FLUSH;
scb->cmd.flush_cache.op_code = IPS_CMD_FLUSH;
scb->cmd.flush_cache.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.flush_cache.state = IPS_NORM_STATE;
scb->cmd.flush_cache.reserved = 0;
scb->cmd.flush_cache.reserved2 = 0;
scb->cmd.flush_cache.reserved3 = 0;
scb->cmd.flush_cache.reserved4 = 0;
/* Attempt the flush command */
ret = ips_send_wait(ha, scb, ips_cmd_timeout, IPS_INTR_IORL);
if (ret == IPS_SUCCESS) {
IPS_PRINTK(KERN_NOTICE, ha->pcidev,
"Reset Request - Flushed Cache\n");
return (SUCCESS);
}
}
/* Either we can't communicate with the adapter or it's an IOCTL request */
/* from a utility. A physical reset is needed at this point. */
ha->ioctl_reset = 0; /* Reset the IOCTL Requested Reset Flag */
/*
* command must have already been sent
* reset the controller
*/
IPS_PRINTK(KERN_NOTICE, ha->pcidev, "Resetting controller.\n");
ret = (*ha->func.reset) (ha);
if (!ret) {
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
struct scsi_cmnd *scsi_cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_PRINTK(KERN_NOTICE, ha->pcidev,
"Controller reset failed - controller now offline.\n");
/* Now fail all of the active commands */
DEBUG_VAR(1, "(%s%d) Failing active commands",
ips_name, ha->host_num);
while ((scb = ips_removeq_scb_head(&ha->scb_activelist))) {
scb->scsi_cmd->result = DID_ERROR << 16;
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
ips_freescb(ha, scb);
}
/* Now fail all of the pending commands */
DEBUG_VAR(1, "(%s%d) Failing pending commands",
ips_name, ha->host_num);
while ((scsi_cmd = ips_removeq_wait_head(&ha->scb_waitlist))) {
scsi_cmd->result = DID_ERROR;
scsi_cmd->scsi_done(scsi_cmd);
}
ha->active = FALSE;
return (FAILED);
}
if (!ips_clear_adapter(ha, IPS_INTR_IORL)) {
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
struct scsi_cmnd *scsi_cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_PRINTK(KERN_NOTICE, ha->pcidev,
"Controller reset failed - controller now offline.\n");
/* Now fail all of the active commands */
DEBUG_VAR(1, "(%s%d) Failing active commands",
ips_name, ha->host_num);
while ((scb = ips_removeq_scb_head(&ha->scb_activelist))) {
scb->scsi_cmd->result = DID_ERROR << 16;
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
ips_freescb(ha, scb);
}
/* Now fail all of the pending commands */
DEBUG_VAR(1, "(%s%d) Failing pending commands",
ips_name, ha->host_num);
while ((scsi_cmd = ips_removeq_wait_head(&ha->scb_waitlist))) {
scsi_cmd->result = DID_ERROR << 16;
scsi_cmd->scsi_done(scsi_cmd);
}
ha->active = FALSE;
return (FAILED);
}
/* FFDC */
if (le32_to_cpu(ha->subsys->param[3]) & 0x300000) {
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
ha->last_ffdc = ktime_get_real_seconds();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->reset_count++;
ips_ffdc_reset(ha, IPS_INTR_IORL);
}
/* Now fail all of the active commands */
DEBUG_VAR(1, "(%s%d) Failing active commands", ips_name, ha->host_num);
while ((scb = ips_removeq_scb_head(&ha->scb_activelist))) {
[SCSI] Remove SUGGEST flags The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-04 11:14:11 +03:00
scb->scsi_cmd->result = DID_RESET << 16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
ips_freescb(ha, scb);
}
/* Reset DCDB active command bits */
for (i = 1; i < ha->nbus; i++)
ha->dcdb_active[i - 1] = 0;
/* Reset the number of active IOCTLs */
ha->num_ioctl = 0;
ips_next(ha, IPS_INTR_IORL);
return (SUCCESS);
#endif /* NO_IPS_RESET */
}
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
static int ips_eh_reset(struct scsi_cmnd *SC)
[SCSI] allow sleeping in ->eh_host_reset_handler() Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-28 15:57:14 +04:00
{
int rc;
spin_lock_irq(SC->device->host->host_lock);
rc = __ips_eh_reset(SC);
spin_unlock_irq(SC->device->host->host_lock);
return rc;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/****************************************************************************/
/* */
/* Routine Name: ips_queue */
/* */
/* Routine Description: */
/* */
/* Send a command to the controller */
/* */
/* NOTE: */
/* Linux obtains io_request_lock before calling this function */
/* */
/****************************************************************************/
SCSI host lock push-down Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 10:10:29 +03:00
static int ips_queue_lck(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
ips_ha_t *ha;
ips_passthru_t *pt;
METHOD_TRACE("ips_queue", 1);
ha = (ips_ha_t *) SC->device->host->hostdata;
if (!ha)
scsi: ips: Use correct command completion on error A non-zero queuecommand() return code means 'busy', i.e. the command hasn't been submitted. So any command which should be failed need to be completed via the ->scsi_done() callback with the appropriate result code set. Link: https://lore.kernel.org/r/20210113090500.129644-32-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13 12:04:56 +03:00
goto out_error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (!ha->active)
scsi: ips: Use correct command completion on error A non-zero queuecommand() return code means 'busy', i.e. the command hasn't been submitted. So any command which should be failed need to be completed via the ->scsi_done() callback with the appropriate result code set. Link: https://lore.kernel.org/r/20210113090500.129644-32-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13 12:04:56 +03:00
goto out_error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ips_is_passthru(SC)) {
if (ha->copp_waitlist.count == IPS_MAX_IOCTL_QUEUE) {
SC->result = DID_BUS_BUSY << 16;
done(SC);
return (0);
}
} else if (ha->scb_waitlist.count == IPS_MAX_QUEUE) {
SC->result = DID_BUS_BUSY << 16;
done(SC);
return (0);
}
SC->scsi_done = done;
DEBUG_VAR(2, "(%s%d): ips_queue: cmd 0x%X (%d %d %d)",
ips_name,
ha->host_num,
SC->cmnd[0],
SC->device->channel, SC->device->id, SC->device->lun);
/* Check for command to initiator IDs */
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 02:05:09 +04:00
if ((scmd_channel(SC) > 0)
&& (scmd_id(SC) == ha->ha_id[scmd_channel(SC)])) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
SC->result = DID_NO_CONNECT << 16;
done(SC);
return (0);
}
if (ips_is_passthru(SC)) {
ips_copp_wait_item_t *scratch;
/* A Reset IOCTL is only sent by the boot CD in extreme cases. */
/* There can never be any system activity ( network or disk ), but check */
/* anyway just as a good practice. */
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
pt = (ips_passthru_t *) scsi_sglist(SC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if ((pt->CoppCP.cmd.reset.op_code == IPS_CMD_RESET_CHANNEL) &&
(pt->CoppCP.cmd.reset.adapter_flag == 1)) {
if (ha->scb_activelist.count != 0) {
SC->result = DID_BUS_BUSY << 16;
done(SC);
return (0);
}
ha->ioctl_reset = 1; /* This reset request is from an IOCTL */
[SCSI] don't call ips_eh_reset in ips_queue to avoid deadlock When the locking was changed in the eh code ips_eh_reset was changed so that it was a wraper around __ips_eh_reset and all ips_eh_reset does is grab the host lock and then calls __ips_eh_reset. In the queuecommand, ips_queue is called with the host_lock held so if it calls ips_eh_reset we will have a problem. This patch just has ips_queue call __ips_eh_reset. Patch is only compile tested. I do not have the HW. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Hammer, Jack <Jack_Hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-22 11:11:59 +03:00
__ips_eh_reset(SC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
SC->result = DID_OK << 16;
SC->scsi_done(SC);
return (0);
}
/* allocate space for the scribble */
scratch = kmalloc(sizeof (ips_copp_wait_item_t), GFP_ATOMIC);
if (!scratch) {
SC->result = DID_ERROR << 16;
done(SC);
return (0);
}
scratch->scsi_cmd = SC;
scratch->next = NULL;
ips_putq_copp_tail(&ha->copp_waitlist, scratch);
} else {
ips_putq_wait_tail(&ha->scb_waitlist, SC);
}
ips_next(ha, IPS_INTR_IORL);
scsi: ips: Use correct command completion on error A non-zero queuecommand() return code means 'busy', i.e. the command hasn't been submitted. So any command which should be failed need to be completed via the ->scsi_done() callback with the appropriate result code set. Link: https://lore.kernel.org/r/20210113090500.129644-32-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13 12:04:56 +03:00
return (0);
out_error:
SC->result = DID_ERROR << 16;
done(SC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return (0);
}
SCSI host lock push-down Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16 10:10:29 +03:00
static DEF_SCSI_QCMD(ips_queue)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/****************************************************************************/
/* */
/* Routine Name: ips_biosparam */
/* */
/* Routine Description: */
/* */
/* Set bios geometry for the controller */
/* */
/****************************************************************************/
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
static int ips_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int geom[])
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
ips_ha_t *ha = (ips_ha_t *) sdev->host->hostdata;
int heads;
int sectors;
int cylinders;
METHOD_TRACE("ips_biosparam", 1);
if (!ha)
/* ?!?! host adater info invalid */
return (0);
if (!ha->active)
return (0);
if (!ips_read_adapter_status(ha, IPS_INTR_ON))
/* ?!?! Enquiry command failed */
return (0);
if ((capacity > 0x400000) && ((ha->enq->ucMiscFlag & 0x8) == 0)) {
heads = IPS_NORM_HEADS;
sectors = IPS_NORM_SECTORS;
} else {
heads = IPS_COMP_HEADS;
sectors = IPS_COMP_SECTORS;
}
cylinders = (unsigned long) capacity / (heads * sectors);
DEBUG_VAR(2, "Geometry: heads: %d, sectors: %d, cylinders: %d",
heads, sectors, cylinders);
geom[0] = heads;
geom[1] = sectors;
geom[2] = cylinders;
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_slave_configure */
/* */
/* Routine Description: */
/* */
/* Set queue depths on devices once scan is complete */
/* */
/****************************************************************************/
static int
[SCSI] remove Scsi_Device typedef Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-31 20:32:08 +03:00
ips_slave_configure(struct scsi_device * SDptr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
ips_ha_t *ha;
int min;
ha = IPS_HA(SDptr->host);
if (SDptr->tagged_supported && SDptr->type == TYPE_DISK) {
min = ha->max_cmds / 2;
if (ha->enq->ucLogDriveCount <= 2)
min = ha->max_cmds - 1;
scsi: drop reason argument from ->change_queue_depth Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-13 17:08:42 +03:00
scsi_change_queue_depth(SDptr, min);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
[SCSI] ips: Mode Sense (Caching Page ) fix To avoid the "sda: got wrong page" message, the ServeRAID driver should be setting flags indicating that the Mode Sense commands are not supported. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-13 18:06:50 +03:00
SDptr->skip_ms_page_8 = 1;
SDptr->skip_ms_page_3f = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return 0;
}
/****************************************************************************/
/* */
/* Routine Name: do_ipsintr */
/* */
/* Routine Description: */
/* */
/* Wrapper for the interrupt handler */
/* */
/****************************************************************************/
static irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
do_ipsintr(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
ips_ha_t *ha;
struct Scsi_Host *host;
int irqstatus;
METHOD_TRACE("do_ipsintr", 2);
ha = (ips_ha_t *) dev_id;
if (!ha)
return IRQ_NONE;
host = ips_sh[ha->host_num];
/* interrupt during initialization */
if (!host) {
(*ha->func.intr) (ha);
return IRQ_HANDLED;
}
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_lock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (!ha->active) {
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_unlock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return IRQ_HANDLED;
}
irqstatus = (*ha->func.intr) (ha);
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_unlock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* start the next command */
ips_next(ha, IPS_INTR_ON);
return IRQ_RETVAL(irqstatus);
}
/****************************************************************************/
/* */
/* Routine Name: ips_intr_copperhead */
/* */
/* Routine Description: */
/* */
/* Polling interrupt handler */
/* */
/* ASSUMES interrupts are disabled */
/* */
/****************************************************************************/
int
ips_intr_copperhead(ips_ha_t * ha)
{
ips_stat_t *sp;
ips_scb_t *scb;
IPS_STATUS cstatus;
int intrstatus;
METHOD_TRACE("ips_intr", 2);
if (!ha)
return 0;
if (!ha->active)
return 0;
intrstatus = (*ha->func.isintr) (ha);
if (!intrstatus) {
/*
* Unexpected/Shared interrupt
*/
return 0;
}
while (TRUE) {
sp = &ha->sp;
intrstatus = (*ha->func.isintr) (ha);
if (!intrstatus)
break;
else
cstatus.value = (*ha->func.statupd) (ha);
if (cstatus.fields.command_id > (IPS_MAX_CMDS - 1)) {
drivers/scsi/: Spelling fixes Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: James Smart <james.smart@emulex.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: David Somayajulu <david.somayajulu@qlogic.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 18:28:22 +03:00
/* Spurious Interrupt ? */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
continue;
}
ips_chkstatus(ha, &cstatus);
scb = (ips_scb_t *) sp->scb_addr;
/*
* use the callback function to finish things up
* NOTE: interrupts are OFF for this
*/
(*scb->callback) (ha, scb);
} /* end while */
return 1;
}
/****************************************************************************/
/* */
/* Routine Name: ips_intr_morpheus */
/* */
/* Routine Description: */
/* */
/* Polling interrupt handler */
/* */
/* ASSUMES interrupts are disabled */
/* */
/****************************************************************************/
int
ips_intr_morpheus(ips_ha_t * ha)
{
ips_stat_t *sp;
ips_scb_t *scb;
IPS_STATUS cstatus;
int intrstatus;
METHOD_TRACE("ips_intr_morpheus", 2);
if (!ha)
return 0;
if (!ha->active)
return 0;
intrstatus = (*ha->func.isintr) (ha);
if (!intrstatus) {
/*
* Unexpected/Shared interrupt
*/
return 0;
}
while (TRUE) {
sp = &ha->sp;
intrstatus = (*ha->func.isintr) (ha);
if (!intrstatus)
break;
else
cstatus.value = (*ha->func.statupd) (ha);
if (cstatus.value == 0xffffffff)
/* No more to process */
break;
if (cstatus.fields.command_id > (IPS_MAX_CMDS - 1)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Spurious interrupt; no ccb.\n");
continue;
}
ips_chkstatus(ha, &cstatus);
scb = (ips_scb_t *) sp->scb_addr;
/*
* use the callback function to finish things up
* NOTE: interrupts are OFF for this
*/
(*scb->callback) (ha, scb);
} /* end while */
return 1;
}
/****************************************************************************/
/* */
/* Routine Name: ips_info */
/* */
/* Routine Description: */
/* */
/* Return info about the driver */
/* */
/****************************************************************************/
static const char *
ips_info(struct Scsi_Host *SH)
{
static char buffer[256];
char *bp;
ips_ha_t *ha;
METHOD_TRACE("ips_info", 1);
ha = IPS_HA(SH);
if (!ha)
return (NULL);
bp = &buffer[0];
memset(bp, 0, sizeof (buffer));
sprintf(bp, "%s%s%s Build %d", "IBM PCI ServeRAID ",
IPS_VERSION_HIGH, IPS_VERSION_LOW, IPS_BUILD_IDENT);
if (ha->ad_type > 0 && ha->ad_type <= MAX_ADAPTER_NAME) {
strcat(bp, " <");
strcat(bp, ips_adapter_name[ha->ad_type - 1]);
strcat(bp, ">");
}
return (bp);
}
static int
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
ips_write_info(struct Scsi_Host *host, char *buffer, int length)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
int i;
ips_ha_t *ha = NULL;
/* Find our host structure */
for (i = 0; i < ips_next_controller; i++) {
if (ips_sh[i]) {
if (ips_sh[i] == host) {
ha = (ips_ha_t *) ips_sh[i]->hostdata;
break;
}
}
}
if (!ha)
return (-EINVAL);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
static int
ips_show_info(struct seq_file *m, struct Scsi_Host *host)
{
int i;
ips_ha_t *ha = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
/* Find our host structure */
for (i = 0; i < ips_next_controller; i++) {
if (ips_sh[i]) {
if (ips_sh[i] == host) {
ha = (ips_ha_t *) ips_sh[i]->hostdata;
break;
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
if (!ha)
return (-EINVAL);
return ips_host_info(ha, m);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/*--------------------------------------------------------------------------*/
/* Helper Functions */
/*--------------------------------------------------------------------------*/
/****************************************************************************/
/* */
/* Routine Name: ips_is_passthru */
/* */
/* Routine Description: */
/* */
/* Determine if the specified SCSI command is really a passthru command */
/* */
/****************************************************************************/
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
static int ips_is_passthru(struct scsi_cmnd *SC)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
[SCSI] ips: Fix up for correct scatter/gather processing Added kmap_atomic/kunmap_atomic. Added protection of KM_IRQ0 slot with local_irq_save(), local_irq_restore(), and comments. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 22:13:03 +04:00
unsigned long flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_is_passthru", 1);
if (!SC)
return (0);
if ((SC->cmnd[0] == IPS_IOCTL_COMMAND) &&
(SC->device->channel == 0) &&
(SC->device->id == IPS_ADAPTER_ID) &&
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
(SC->device->lun == 0) && scsi_sglist(SC)) {
struct scatterlist *sg = scsi_sglist(SC);
char *buffer;
/* kmap_atomic() ensures addressability of the user buffer.*/
/* local_irq_save() protects the KM_IRQ0 address slot. */
local_irq_save(flags);
scsi: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-25 19:14:23 +04:00
buffer = kmap_atomic(sg_page(sg)) + sg->offset;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
if (buffer && buffer[0] == 'C' && buffer[1] == 'O' &&
buffer[2] == 'P' && buffer[3] == 'P') {
scsi: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-25 19:14:23 +04:00
kunmap_atomic(buffer - sg->offset);
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
local_irq_restore(flags);
return 1;
}
scsi: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
2011-11-25 19:14:23 +04:00
kunmap_atomic(buffer - sg->offset);
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
local_irq_restore(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
return 0;
}
/****************************************************************************/
/* */
/* Routine Name: ips_alloc_passthru_buffer */
/* */
/* Routine Description: */
/* allocate a buffer large enough for the ioctl data if the ioctl buffer */
/* is too small or doesn't exist */
/****************************************************************************/
static int
ips_alloc_passthru_buffer(ips_ha_t * ha, int length)
{
void *bigger_buf;
dma_addr_t dma_busaddr;
if (ha->ioctl_data && length <= ha->ioctl_len)
return 0;
/* there is no buffer or it's not big enough, allocate a new one */
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
bigger_buf = dma_alloc_coherent(&ha->pcidev->dev, length, &dma_busaddr,
GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (bigger_buf) {
/* free the old memory */
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev, ha->ioctl_len,
ha->ioctl_data, ha->ioctl_busaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* use the new memory */
ha->ioctl_data = (char *) bigger_buf;
ha->ioctl_len = length;
ha->ioctl_busaddr = dma_busaddr;
} else {
return -1;
}
return 0;
}
/****************************************************************************/
/* */
/* Routine Name: ips_make_passthru */
/* */
/* Routine Description: */
/* */
/* Make a passthru command out of the info in the Scsi block */
/* */
/****************************************************************************/
static int
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
ips_make_passthru(ips_ha_t *ha, struct scsi_cmnd *SC, ips_scb_t *scb, int intr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
ips_passthru_t *pt;
int length = 0;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
int i, ret;
struct scatterlist *sg = scsi_sglist(SC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_make_passthru", 1);
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
scsi_for_each_sg(SC, sg, scsi_sg_count(SC), i)
[SCSI] ips: fix data buffer accessors conversion bug This fixes a bug that can't handle a passthru command with more than two sg entries. Big thanks to Tim Pepper for debugging the problem. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-19 11:02:27 +03:00
length += sg->length;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (length < sizeof (ips_passthru_t)) {
/* wrong size */
DEBUG_VAR(1, "(%s%d) Passthru structure wrong size",
ips_name, ha->host_num);
return (IPS_FAILURE);
}
if (ips_alloc_passthru_buffer(ha, length)) {
/* allocation failure! If ha->ioctl_data exists, use it to return
some error codes. Return a failed command to the scsi layer. */
if (ha->ioctl_data) {
pt = (ips_passthru_t *) ha->ioctl_data;
ips_scmd_buf_read(SC, pt, sizeof (ips_passthru_t));
pt->BasicStatus = 0x0B;
pt->ExtendedStatus = 0x00;
ips_scmd_buf_write(SC, pt, sizeof (ips_passthru_t));
}
return IPS_FAILURE;
}
ha->ioctl_datasize = length;
ips_scmd_buf_read(SC, ha->ioctl_data, ha->ioctl_datasize);
pt = (ips_passthru_t *) ha->ioctl_data;
/*
* Some notes about the passthru interface used
*
* IF the scsi op_code == 0x0d then we assume
* that the data came along with/goes with the
* packet we received from the sg driver. In this
* case the CmdBSize field of the pt structure is
* used for the size of the buffer.
*/
switch (pt->CoppCmd) {
case IPS_NUMCTRLS:
memcpy(ha->ioctl_data + sizeof (ips_passthru_t),
&ips_num_controllers, sizeof (int));
ips_scmd_buf_write(SC, ha->ioctl_data,
sizeof (ips_passthru_t) + sizeof (int));
SC->result = DID_OK << 16;
return (IPS_SUCCESS_IMM);
case IPS_COPPUSRCMD:
case IPS_COPPIOCCMD:
if (SC->cmnd[0] == IPS_IOCTL_COMMAND) {
if (length < (sizeof (ips_passthru_t) + pt->CmdBSize)) {
/* wrong size */
DEBUG_VAR(1,
"(%s%d) Passthru structure wrong size",
ips_name, ha->host_num);
return (IPS_FAILURE);
}
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->device == IPS_DEVICEID_COPPERHEAD &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
pt->CoppCP.cmd.flashfw.op_code ==
IPS_CMD_RW_BIOSFW) {
ret = ips_flash_copperhead(ha, pt, scb);
ips_scmd_buf_write(SC, ha->ioctl_data,
sizeof (ips_passthru_t));
return ret;
}
if (ips_usrcmd(ha, pt, scb))
return (IPS_SUCCESS);
else
return (IPS_FAILURE);
}
break;
} /* end switch */
return (IPS_FAILURE);
}
/****************************************************************************/
/* Routine Name: ips_flash_copperhead */
/* Routine Description: */
/* Flash the BIOS/FW on a Copperhead style controller */
/****************************************************************************/
static int
ips_flash_copperhead(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb)
{
int datasize;
/* Trombone is the only copperhead that can do packet flash, but only
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 05:57:33 +04:00
* for firmware. No one said it had to make sense. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (IPS_IS_TROMBONE(ha) && pt->CoppCP.cmd.flashfw.type == IPS_FW_IMAGE) {
if (ips_usrcmd(ha, pt, scb))
return IPS_SUCCESS;
else
return IPS_FAILURE;
}
pt->BasicStatus = 0x0B;
pt->ExtendedStatus = 0;
scb->scsi_cmd->result = DID_OK << 16;
/* IF it's OK to Use the "CD BOOT" Flash Buffer, then you can */
/* avoid allocating a huge buffer per adapter ( which can fail ). */
if (pt->CoppCP.cmd.flashfw.type == IPS_BIOS_IMAGE &&
pt->CoppCP.cmd.flashfw.direction == IPS_ERASE_BIOS) {
pt->BasicStatus = 0;
return ips_flash_bios(ha, pt, scb);
} else if (pt->CoppCP.cmd.flashfw.packet_num == 0) {
if (ips_FlashData && !test_and_set_bit(0, &ips_FlashDataInUse)){
ha->flash_data = ips_FlashData;
ha->flash_busaddr = ips_flashbusaddr;
ha->flash_len = PAGE_SIZE << 7;
ha->flash_datasize = 0;
} else if (!ha->flash_data) {
datasize = pt->CoppCP.cmd.flashfw.total_packets *
pt->CoppCP.cmd.flashfw.count;
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ha->flash_data = dma_alloc_coherent(&ha->pcidev->dev,
datasize, &ha->flash_busaddr, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (!ha->flash_data){
printk(KERN_WARNING "Unable to allocate a flash buffer\n");
return IPS_FAILURE;
}
ha->flash_datasize = 0;
ha->flash_len = datasize;
} else
return IPS_FAILURE;
} else {
if (pt->CoppCP.cmd.flashfw.count + ha->flash_datasize >
ha->flash_len) {
ips_free_flash_copperhead(ha);
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"failed size sanity check\n");
return IPS_FAILURE;
}
}
if (!ha->flash_data)
return IPS_FAILURE;
pt->BasicStatus = 0;
memcpy(&ha->flash_data[ha->flash_datasize], pt + 1,
pt->CoppCP.cmd.flashfw.count);
ha->flash_datasize += pt->CoppCP.cmd.flashfw.count;
if (pt->CoppCP.cmd.flashfw.packet_num ==
pt->CoppCP.cmd.flashfw.total_packets - 1) {
if (pt->CoppCP.cmd.flashfw.type == IPS_BIOS_IMAGE)
return ips_flash_bios(ha, pt, scb);
else if (pt->CoppCP.cmd.flashfw.type == IPS_FW_IMAGE)
return ips_flash_firmware(ha, pt, scb);
}
return IPS_SUCCESS_IMM;
}
/****************************************************************************/
/* Routine Name: ips_flash_bios */
/* Routine Description: */
/* flashes the bios of a copperhead adapter */
/****************************************************************************/
static int
ips_flash_bios(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb)
{
if (pt->CoppCP.cmd.flashfw.type == IPS_BIOS_IMAGE &&
pt->CoppCP.cmd.flashfw.direction == IPS_WRITE_BIOS) {
if ((!ha->func.programbios) || (!ha->func.erasebios) ||
(!ha->func.verifybios))
goto error;
if ((*ha->func.erasebios) (ha)) {
DEBUG_VAR(1,
"(%s%d) flash bios failed - unable to erase flash",
ips_name, ha->host_num);
goto error;
} else
if ((*ha->func.programbios) (ha,
ha->flash_data +
IPS_BIOS_HEADER,
ha->flash_datasize -
IPS_BIOS_HEADER, 0)) {
DEBUG_VAR(1,
"(%s%d) flash bios failed - unable to flash",
ips_name, ha->host_num);
goto error;
} else
if ((*ha->func.verifybios) (ha,
ha->flash_data +
IPS_BIOS_HEADER,
ha->flash_datasize -
IPS_BIOS_HEADER, 0)) {
DEBUG_VAR(1,
"(%s%d) flash bios failed - unable to verify flash",
ips_name, ha->host_num);
goto error;
}
ips_free_flash_copperhead(ha);
return IPS_SUCCESS_IMM;
} else if (pt->CoppCP.cmd.flashfw.type == IPS_BIOS_IMAGE &&
pt->CoppCP.cmd.flashfw.direction == IPS_ERASE_BIOS) {
if (!ha->func.erasebios)
goto error;
if ((*ha->func.erasebios) (ha)) {
DEBUG_VAR(1,
"(%s%d) flash bios failed - unable to erase flash",
ips_name, ha->host_num);
goto error;
}
return IPS_SUCCESS_IMM;
}
error:
pt->BasicStatus = 0x0B;
pt->ExtendedStatus = 0x00;
ips_free_flash_copperhead(ha);
return IPS_FAILURE;
}
/****************************************************************************/
/* */
/* Routine Name: ips_fill_scb_sg_single */
/* */
/* Routine Description: */
/* Fill in a single scb sg_list element from an address */
/* return a -1 if a breakup occurred */
/****************************************************************************/
static int
ips_fill_scb_sg_single(ips_ha_t * ha, dma_addr_t busaddr,
ips_scb_t * scb, int indx, unsigned int e_len)
{
int ret_val = 0;
if ((scb->data_len + e_len) > ha->max_xfer) {
e_len = ha->max_xfer - scb->data_len;
scb->breakup = indx;
++scb->sg_break;
ret_val = -1;
} else {
scb->breakup = 0;
scb->sg_break = 0;
}
if (IPS_USE_ENH_SGLIST(ha)) {
scb->sg_list.enh_list[indx].address_lo =
scsi: ips: use lower_32_bits and upper_32_bits instead of reinventing them Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-18 16:03:33 +03:00
cpu_to_le32(lower_32_bits(busaddr));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scb->sg_list.enh_list[indx].address_hi =
scsi: ips: use lower_32_bits and upper_32_bits instead of reinventing them Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-18 16:03:33 +03:00
cpu_to_le32(upper_32_bits(busaddr));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scb->sg_list.enh_list[indx].length = cpu_to_le32(e_len);
} else {
scb->sg_list.std_list[indx].address =
scsi: ips: use lower_32_bits and upper_32_bits instead of reinventing them Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-18 16:03:33 +03:00
cpu_to_le32(lower_32_bits(busaddr));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scb->sg_list.std_list[indx].length = cpu_to_le32(e_len);
}
++scb->sg_len;
scb->data_len += e_len;
return ret_val;
}
/****************************************************************************/
/* Routine Name: ips_flash_firmware */
/* Routine Description: */
/* flashes the firmware of a copperhead adapter */
/****************************************************************************/
static int
ips_flash_firmware(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb)
{
IPS_SG_LIST sg_list;
uint32_t cmd_busaddr;
if (pt->CoppCP.cmd.flashfw.type == IPS_FW_IMAGE &&
pt->CoppCP.cmd.flashfw.direction == IPS_WRITE_FW) {
memset(&pt->CoppCP.cmd, 0, sizeof (IPS_HOST_COMMAND));
pt->CoppCP.cmd.flashfw.op_code = IPS_CMD_DOWNLOAD;
pt->CoppCP.cmd.flashfw.count = cpu_to_le32(ha->flash_datasize);
} else {
pt->BasicStatus = 0x0B;
pt->ExtendedStatus = 0x00;
ips_free_flash_copperhead(ha);
return IPS_FAILURE;
}
/* Save the S/G list pointer so it doesn't get clobbered */
sg_list.list = scb->sg_list.list;
cmd_busaddr = scb->scb_busaddr;
/* copy in the CP */
memcpy(&scb->cmd, &pt->CoppCP.cmd, sizeof (IPS_IOCTL_CMD));
/* FIX stuff that might be wrong */
scb->sg_list.list = sg_list.list;
scb->scb_busaddr = cmd_busaddr;
scb->bus = scb->scsi_cmd->device->channel;
scb->target_id = scb->scsi_cmd->device->id;
scb->lun = scb->scsi_cmd->device->lun;
scb->sg_len = 0;
scb->data_len = 0;
scb->flags = 0;
scb->op_code = 0;
scb->callback = ipsintr_done;
scb->timeout = ips_cmd_timeout;
scb->data_len = ha->flash_datasize;
scb->data_busaddr =
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_map_single(&ha->pcidev->dev, ha->flash_data, scb->data_len,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_DMA_DIR(scb));
scb->flags |= IPS_SCB_MAP_SINGLE;
scb->cmd.flashfw.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.flashfw.buffer_addr = cpu_to_le32(scb->data_busaddr);
if (pt->TimeOut)
scb->timeout = pt->TimeOut;
scb->scsi_cmd->result = DID_OK << 16;
return IPS_SUCCESS;
}
/****************************************************************************/
/* Routine Name: ips_free_flash_copperhead */
/* Routine Description: */
/* release the memory resources used to hold the flash image */
/****************************************************************************/
static void
ips_free_flash_copperhead(ips_ha_t * ha)
{
if (ha->flash_data == ips_FlashData)
test_and_clear_bit(0, &ips_FlashDataInUse);
else if (ha->flash_data)
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev, ha->flash_len,
ha->flash_data, ha->flash_busaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->flash_data = NULL;
}
/****************************************************************************/
/* */
/* Routine Name: ips_usrcmd */
/* */
/* Routine Description: */
/* */
/* Process a user command and make it ready to send */
/* */
/****************************************************************************/
static int
ips_usrcmd(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb)
{
IPS_SG_LIST sg_list;
uint32_t cmd_busaddr;
METHOD_TRACE("ips_usrcmd", 1);
if ((!scb) || (!pt) || (!ha))
return (0);
/* Save the S/G list pointer so it doesn't get clobbered */
sg_list.list = scb->sg_list.list;
cmd_busaddr = scb->scb_busaddr;
/* copy in the CP */
memcpy(&scb->cmd, &pt->CoppCP.cmd, sizeof (IPS_IOCTL_CMD));
memcpy(&scb->dcdb, &pt->CoppCP.dcdb, sizeof (IPS_DCDB_TABLE));
/* FIX stuff that might be wrong */
scb->sg_list.list = sg_list.list;
scb->scb_busaddr = cmd_busaddr;
scb->bus = scb->scsi_cmd->device->channel;
scb->target_id = scb->scsi_cmd->device->id;
scb->lun = scb->scsi_cmd->device->lun;
scb->sg_len = 0;
scb->data_len = 0;
scb->flags = 0;
scb->op_code = 0;
scb->callback = ipsintr_done;
scb->timeout = ips_cmd_timeout;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
/* we don't support DCDB/READ/WRITE Scatter Gather */
if ((scb->cmd.basic_io.op_code == IPS_CMD_READ_SG) ||
(scb->cmd.basic_io.op_code == IPS_CMD_WRITE_SG) ||
(scb->cmd.basic_io.op_code == IPS_CMD_DCDB_SG))
return (0);
if (pt->CmdBSize) {
scb->data_len = pt->CmdBSize;
scb->data_busaddr = ha->ioctl_busaddr + sizeof (ips_passthru_t);
} else {
scb->data_busaddr = 0L;
}
if (scb->cmd.dcdb.op_code == IPS_CMD_DCDB)
scb->cmd.dcdb.dcdb_address = cpu_to_le32(scb->scb_busaddr +
(unsigned long) &scb->
dcdb -
(unsigned long) scb);
if (pt->CmdBSize) {
if (scb->cmd.dcdb.op_code == IPS_CMD_DCDB)
scb->dcdb.buffer_pointer =
cpu_to_le32(scb->data_busaddr);
else
scb->cmd.basic_io.sg_addr =
cpu_to_le32(scb->data_busaddr);
}
/* set timeouts */
if (pt->TimeOut) {
scb->timeout = pt->TimeOut;
if (pt->TimeOut <= 10)
scb->dcdb.cmd_attribute |= IPS_TIMEOUT10;
else if (pt->TimeOut <= 60)
scb->dcdb.cmd_attribute |= IPS_TIMEOUT60;
else
scb->dcdb.cmd_attribute |= IPS_TIMEOUT20M;
}
/* assume success */
scb->scsi_cmd->result = DID_OK << 16;
/* success */
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_cleanup_passthru */
/* */
/* Routine Description: */
/* */
/* Cleanup after a passthru command */
/* */
/****************************************************************************/
static void
ips_cleanup_passthru(ips_ha_t * ha, ips_scb_t * scb)
{
ips_passthru_t *pt;
METHOD_TRACE("ips_cleanup_passthru", 1);
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
if ((!scb) || (!scb->scsi_cmd) || (!scsi_sglist(scb->scsi_cmd))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
DEBUG_VAR(1, "(%s%d) couldn't cleanup after passthru",
ips_name, ha->host_num);
return;
}
pt = (ips_passthru_t *) ha->ioctl_data;
/* Copy data back to the user */
if (scb->cmd.dcdb.op_code == IPS_CMD_DCDB) /* Copy DCDB Back to Caller's Area */
memcpy(&pt->CoppCP.dcdb, &scb->dcdb, sizeof (IPS_DCDB_TABLE));
pt->BasicStatus = scb->basic_status;
pt->ExtendedStatus = scb->extended_status;
pt->AdapterType = ha->ad_type;
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->device == IPS_DEVICEID_COPPERHEAD &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
(scb->cmd.flashfw.op_code == IPS_CMD_DOWNLOAD ||
scb->cmd.flashfw.op_code == IPS_CMD_RW_BIOSFW))
ips_free_flash_copperhead(ha);
ips_scmd_buf_write(scb->scsi_cmd, ha->ioctl_data, ha->ioctl_datasize);
}
/****************************************************************************/
/* */
/* Routine Name: ips_host_info */
/* */
/* Routine Description: */
/* */
/* The passthru interface for the driver */
/* */
/****************************************************************************/
static int
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
ips_host_info(ips_ha_t *ha, struct seq_file *m)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
METHOD_TRACE("ips_host_info", 1);
scsi: replace seq_printf with seq_puts Using seq_printf to print a simple string is a lot more expensive than it needs to be, since seq_puts exists. Replace seq_printf with seq_puts when possible. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-03 02:10:52 +03:00
seq_puts(m, "\nIBM ServeRAID General Information:\n\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if ((le32_to_cpu(ha->nvram->signature) == IPS_NVRAM_P5_SIG) &&
(le16_to_cpu(ha->nvram->adapter_type) != 0))
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tController Type : %s\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_adapter_name[ha->ad_type - 1]);
else
scsi: replace seq_printf with seq_puts Using seq_printf to print a simple string is a lot more expensive than it needs to be, since seq_puts exists. Replace seq_printf with seq_puts when possible. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-03 02:10:52 +03:00
seq_puts(m, "\tController Type : Unknown\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ha->io_addr)
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
ips: fix format bugs exposed by previous commit Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:17:09 +04:00
"\tIO region : 0x%x (%d bytes)\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->io_addr, ha->io_len);
if (ha->mem_addr) {
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
ips: fix format bugs exposed by previous commit Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:17:09 +04:00
"\tMemory region : 0x%x (%d bytes)\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->mem_addr, ha->mem_len);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
"\tShared memory address : 0x%lx\n",
ips: fix format bugs exposed by previous commit Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:17:09 +04:00
(unsigned long)ha->mem_ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tIRQ number : %d\n", ha->pcidev->irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* For the Next 3 lines Check for Binary 0 at the end and don't include it if it's there. */
/* That keeps everything happy for "text" operations on the proc file. */
if (le32_to_cpu(ha->nvram->signature) == IPS_NVRAM_P5_SIG) {
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
if (ha->nvram->bios_low[3] == 0) {
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
"\tBIOS Version : %c%c%c%c%c%c%c\n",
ha->nvram->bios_high[0], ha->nvram->bios_high[1],
ha->nvram->bios_high[2], ha->nvram->bios_high[3],
ha->nvram->bios_low[0], ha->nvram->bios_low[1],
ha->nvram->bios_low[2]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
} else {
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
"\tBIOS Version : %c%c%c%c%c%c%c%c\n",
ha->nvram->bios_high[0], ha->nvram->bios_high[1],
ha->nvram->bios_high[2], ha->nvram->bios_high[3],
ha->nvram->bios_low[0], ha->nvram->bios_low[1],
ha->nvram->bios_low[2], ha->nvram->bios_low[3]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
}
if (ha->enq->CodeBlkVersion[7] == 0) {
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
"\tFirmware Version : %c%c%c%c%c%c%c\n",
ha->enq->CodeBlkVersion[0], ha->enq->CodeBlkVersion[1],
ha->enq->CodeBlkVersion[2], ha->enq->CodeBlkVersion[3],
ha->enq->CodeBlkVersion[4], ha->enq->CodeBlkVersion[5],
ha->enq->CodeBlkVersion[6]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
} else {
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
"\tFirmware Version : %c%c%c%c%c%c%c%c\n",
ha->enq->CodeBlkVersion[0], ha->enq->CodeBlkVersion[1],
ha->enq->CodeBlkVersion[2], ha->enq->CodeBlkVersion[3],
ha->enq->CodeBlkVersion[4], ha->enq->CodeBlkVersion[5],
ha->enq->CodeBlkVersion[6], ha->enq->CodeBlkVersion[7]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (ha->enq->BootBlkVersion[7] == 0) {
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
"\tBoot Block Version : %c%c%c%c%c%c%c\n",
ha->enq->BootBlkVersion[0], ha->enq->BootBlkVersion[1],
ha->enq->BootBlkVersion[2], ha->enq->BootBlkVersion[3],
ha->enq->BootBlkVersion[4], ha->enq->BootBlkVersion[5],
ha->enq->BootBlkVersion[6]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
} else {
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m,
"\tBoot Block Version : %c%c%c%c%c%c%c%c\n",
ha->enq->BootBlkVersion[0], ha->enq->BootBlkVersion[1],
ha->enq->BootBlkVersion[2], ha->enq->BootBlkVersion[3],
ha->enq->BootBlkVersion[4], ha->enq->BootBlkVersion[5],
ha->enq->BootBlkVersion[6], ha->enq->BootBlkVersion[7]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tDriver Version : %s%s\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_VERSION_HIGH, IPS_VERSION_LOW);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tDriver Build : %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_BUILD_IDENT);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tMax Physical Devices : %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->enq->ucMaxPhysicalDevices);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tMax Active Commands : %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->max_cmds);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tCurrent Queued Commands : %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->scb_waitlist.count);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tCurrent Active Commands : %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->scb_activelist.count - ha->num_ioctl);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tCurrent Queued PT Commands : %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->copp_waitlist.count);
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
seq_printf(m, "\tCurrent Active PT Commands : %d\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->num_ioctl);
scsi: print single-character strings with seq_putc Using seq_putc to print a single character saves at least a strlen() call and a memory access, and may also give a small .text reduction. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-03 02:10:54 +03:00
seq_putc(m, '\n');
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips: switch to ->show_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-31 20:15:44 +04:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/****************************************************************************/
/* */
/* Routine Name: ips_identify_controller */
/* */
/* Routine Description: */
/* */
/* Identify this controller */
/* */
/****************************************************************************/
static void
ips_identify_controller(ips_ha_t * ha)
{
METHOD_TRACE("ips_identify_controller", 1);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
switch (ha->pcidev->device) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
case IPS_DEVICEID_COPPERHEAD:
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision <= IPS_REVID_SERVERAID) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->ad_type = IPS_ADTYPE_SERVERAID;
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
} else if (ha->pcidev->revision == IPS_REVID_SERVERAID2) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->ad_type = IPS_ADTYPE_SERVERAID2;
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
} else if (ha->pcidev->revision == IPS_REVID_NAVAJO) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->ad_type = IPS_ADTYPE_NAVAJO;
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
} else if ((ha->pcidev->revision == IPS_REVID_SERVERAID2)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
&& (ha->slot_num == 0)) {
ha->ad_type = IPS_ADTYPE_KIOWA;
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
} else if ((ha->pcidev->revision >= IPS_REVID_CLARINETP1) &&
(ha->pcidev->revision <= IPS_REVID_CLARINETP3)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ha->enq->ucMaxPhysicalDevices == 15)
ha->ad_type = IPS_ADTYPE_SERVERAID3L;
else
ha->ad_type = IPS_ADTYPE_SERVERAID3;
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
} else if ((ha->pcidev->revision >= IPS_REVID_TROMBONE32) &&
(ha->pcidev->revision <= IPS_REVID_TROMBONE64)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->ad_type = IPS_ADTYPE_SERVERAID4H;
}
break;
case IPS_DEVICEID_MORPHEUS:
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
switch (ha->pcidev->subsystem_device) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
case IPS_SUBDEVICEID_4L:
ha->ad_type = IPS_ADTYPE_SERVERAID4L;
break;
case IPS_SUBDEVICEID_4M:
ha->ad_type = IPS_ADTYPE_SERVERAID4M;
break;
case IPS_SUBDEVICEID_4MX:
ha->ad_type = IPS_ADTYPE_SERVERAID4MX;
break;
case IPS_SUBDEVICEID_4LX:
ha->ad_type = IPS_ADTYPE_SERVERAID4LX;
break;
case IPS_SUBDEVICEID_5I2:
ha->ad_type = IPS_ADTYPE_SERVERAID5I2;
break;
case IPS_SUBDEVICEID_5I1:
ha->ad_type = IPS_ADTYPE_SERVERAID5I1;
break;
}
break;
case IPS_DEVICEID_MARCO:
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
switch (ha->pcidev->subsystem_device) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
case IPS_SUBDEVICEID_6M:
ha->ad_type = IPS_ADTYPE_SERVERAID6M;
break;
case IPS_SUBDEVICEID_6I:
ha->ad_type = IPS_ADTYPE_SERVERAID6I;
break;
case IPS_SUBDEVICEID_7k:
ha->ad_type = IPS_ADTYPE_SERVERAID7k;
break;
case IPS_SUBDEVICEID_7M:
ha->ad_type = IPS_ADTYPE_SERVERAID7M;
break;
}
break;
}
}
/****************************************************************************/
/* */
/* Routine Name: ips_get_bios_version */
/* */
/* Routine Description: */
/* */
/* Get the BIOS revision number */
/* */
/****************************************************************************/
static void
ips_get_bios_version(ips_ha_t * ha, int intr)
{
ips_scb_t *scb;
int ret;
uint8_t major;
uint8_t minor;
uint8_t subminor;
uint8_t *buffer;
METHOD_TRACE("ips_get_bios_version", 1);
major = 0;
minor = 0;
scsi: ips: Convert strnlen() to memcpy() since result should not be NUL terminated Fixes the following W=1 kernel build warning(s): In file included from arch/arm/include/asm/io.h:23, from drivers/scsi/ips.c:164: In function ‘strncpy’, inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ NB: Lots of these - snipping for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:19 +03:00
memcpy(ha->bios_version, " ?", 8);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->device == IPS_DEVICEID_COPPERHEAD) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (IPS_USE_MEMIO(ha)) {
/* Memory Mapped I/O */
/* test 1st byte */
writel(0, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0x55)
return;
writel(1, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0xAA)
return;
/* Get Major version */
writel(0x1FF, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
major = readb(ha->mem_ptr + IPS_REG_FLDP);
/* Get Minor version */
writel(0x1FE, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
minor = readb(ha->mem_ptr + IPS_REG_FLDP);
/* Get SubMinor version */
writel(0x1FD, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
subminor = readb(ha->mem_ptr + IPS_REG_FLDP);
} else {
/* Programmed I/O */
/* test 1st byte */
outl(0, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (inb(ha->io_addr + IPS_REG_FLDP) != 0x55)
return;
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(1, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (inb(ha->io_addr + IPS_REG_FLDP) != 0xAA)
return;
/* Get Major version */
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(0x1FF, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
major = inb(ha->io_addr + IPS_REG_FLDP);
/* Get Minor version */
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(0x1FE, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
minor = inb(ha->io_addr + IPS_REG_FLDP);
/* Get SubMinor version */
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(0x1FD, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
subminor = inb(ha->io_addr + IPS_REG_FLDP);
}
} else {
/* Morpheus Family - Send Command to the card */
buffer = ha->ioctl_data;
memset(buffer, 0, 0x1000);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_RW_BIOSFW;
scb->cmd.flashfw.op_code = IPS_CMD_RW_BIOSFW;
scb->cmd.flashfw.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.flashfw.type = 1;
scb->cmd.flashfw.direction = 0;
scb->cmd.flashfw.count = cpu_to_le32(0x800);
scb->cmd.flashfw.total_packets = 1;
scb->cmd.flashfw.packet_num = 0;
scb->data_len = 0x1000;
scb->cmd.flashfw.buffer_addr = ha->ioctl_busaddr;
/* issue the command */
if (((ret =
ips_send_wait(ha, scb, ips_cmd_timeout,
intr)) == IPS_FAILURE)
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1)) {
/* Error occurred */
return;
}
if ((buffer[0xC0] == 0x55) && (buffer[0xC1] == 0xAA)) {
major = buffer[0x1ff + 0xC0]; /* Offset 0x1ff after the header (0xc0) */
minor = buffer[0x1fe + 0xC0]; /* Offset 0x1fe after the header (0xc0) */
subminor = buffer[0x1fd + 0xC0]; /* Offset 0x1fd after the header (0xc0) */
} else {
return;
}
}
scsi: ips: don't use custom hex_asc_upper[] table We have table of the HEX characters in the kernel. Replace custom by a generic one. Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-22 20:32:29 +03:00
ha->bios_version[0] = hex_asc_upper_hi(major);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->bios_version[1] = '.';
scsi: ips: don't use custom hex_asc_upper[] table We have table of the HEX characters in the kernel. Replace custom by a generic one. Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-22 20:32:29 +03:00
ha->bios_version[2] = hex_asc_upper_lo(major);
ha->bios_version[3] = hex_asc_upper_lo(subminor);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->bios_version[4] = '.';
scsi: ips: don't use custom hex_asc_upper[] table We have table of the HEX characters in the kernel. Replace custom by a generic one. Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-22 20:32:29 +03:00
ha->bios_version[5] = hex_asc_upper_hi(minor);
ha->bios_version[6] = hex_asc_upper_lo(minor);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->bios_version[7] = 0;
}
/****************************************************************************/
/* */
/* Routine Name: ips_hainit */
/* */
/* Routine Description: */
/* */
/* Initialize the controller */
/* */
/* NOTE: Assumes to be called from with a lock */
/* */
/****************************************************************************/
static int
ips_hainit(ips_ha_t * ha)
{
int i;
METHOD_TRACE("ips_hainit", 1);
if (!ha)
return (0);
if (ha->func.statinit)
(*ha->func.statinit) (ha);
if (ha->func.enableint)
(*ha->func.enableint) (ha);
/* Send FFDC */
ha->reset_count = 1;
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
ha->last_ffdc = ktime_get_real_seconds();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_ffdc_reset(ha, IPS_INTR_IORL);
if (!ips_read_config(ha, IPS_INTR_IORL)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"unable to read config from controller.\n");
return (0);
}
/* end if */
if (!ips_read_adapter_status(ha, IPS_INTR_IORL)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"unable to read controller status.\n");
return (0);
}
/* Identify this controller */
ips_identify_controller(ha);
if (!ips_read_subsystem_parameters(ha, IPS_INTR_IORL)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"unable to read subsystem parameters.\n");
return (0);
}
/* write nvram user page 5 */
if (!ips_write_driver_status(ha, IPS_INTR_IORL)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"unable to write driver info to controller.\n");
return (0);
}
/* If there are Logical Drives and a Reset Occurred, then an EraseStripeLock is Needed */
if ((ha->conf->ucLogDriveCount > 0) && (ha->requires_esl == 1))
ips_clear_adapter(ha, IPS_INTR_IORL);
/* set limits on SID, LUN, BUS */
ha->ntargets = IPS_MAX_TARGETS + 1;
ha->nlun = 1;
ha->nbus = (ha->enq->ucMaxPhysicalDevices / IPS_MAX_TARGETS) + 1;
switch (ha->conf->logical_drive[0].ucStripeSize) {
case 4:
ha->max_xfer = 0x10000;
break;
case 5:
ha->max_xfer = 0x20000;
break;
case 6:
ha->max_xfer = 0x40000;
break;
case 7:
default:
ha->max_xfer = 0x80000;
break;
}
/* setup max concurrent commands */
if (le32_to_cpu(ha->subsys->param[4]) & 0x1) {
/* Use the new method */
ha->max_cmds = ha->enq->ucConcurrentCmdCount;
} else {
/* use the old method */
switch (ha->conf->logical_drive[0].ucStripeSize) {
case 4:
ha->max_cmds = 32;
break;
case 5:
ha->max_cmds = 16;
break;
case 6:
ha->max_cmds = 8;
break;
case 7:
default:
ha->max_cmds = 4;
break;
}
}
/* Limit the Active Commands on a Lite Adapter */
if ((ha->ad_type == IPS_ADTYPE_SERVERAID3L) ||
(ha->ad_type == IPS_ADTYPE_SERVERAID4L) ||
(ha->ad_type == IPS_ADTYPE_SERVERAID4LX)) {
if ((ha->max_cmds > MaxLiteCmds) && (MaxLiteCmds))
ha->max_cmds = MaxLiteCmds;
}
/* set controller IDs */
ha->ha_id[0] = IPS_ADAPTER_ID;
for (i = 1; i < ha->nbus; i++) {
ha->ha_id[i] = ha->conf->init_id[i - 1] & 0x1f;
ha->dcdb_active[i - 1] = 0;
}
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_next */
/* */
/* Routine Description: */
/* */
/* Take the next command off the queue and send it to the controller */
/* */
/****************************************************************************/
static void
ips_next(ips_ha_t * ha, int intr)
{
ips_scb_t *scb;
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
struct scsi_cmnd *SC;
struct scsi_cmnd *p;
struct scsi_cmnd *q;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_copp_wait_item_t *item;
int ret;
struct Scsi_Host *host;
METHOD_TRACE("ips_next", 1);
if (!ha)
return;
host = ips_sh[ha->host_num];
/*
* Block access to the queue function so
* this command won't time out
*/
if (intr == IPS_INTR_ON)
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_lock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if ((ha->subsys->param[3] & 0x300000)
&& (ha->scb_activelist.count == 0)) {
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
time64_t now = ktime_get_real_seconds();
if (now - ha->last_ffdc > IPS_SECS_8HOURS) {
ha->last_ffdc = now;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_ffdc_time(ha);
}
}
/*
* Send passthru commands
* These have priority over normal I/O
* but shouldn't affect performance too much
* since we limit the number that can be active
* on the card at any one time
*/
while ((ha->num_ioctl < IPS_MAX_IOCTL) &&
(ha->copp_waitlist.head) && (scb = ips_getscb(ha))) {
item = ips_removeq_copp_head(&ha->copp_waitlist);
ha->num_ioctl++;
if (intr == IPS_INTR_ON)
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_unlock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scb->scsi_cmd = item->scsi_cmd;
kfree(item);
ret = ips_make_passthru(ha, scb->scsi_cmd, scb, intr);
if (intr == IPS_INTR_ON)
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_lock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
switch (ret) {
case IPS_FAILURE:
if (scb->scsi_cmd) {
scb->scsi_cmd->result = DID_ERROR << 16;
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
}
ips_freescb(ha, scb);
break;
case IPS_SUCCESS_IMM:
if (scb->scsi_cmd) {
scb->scsi_cmd->result = DID_OK << 16;
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
}
ips_freescb(ha, scb);
break;
default:
break;
} /* end case */
if (ret != IPS_SUCCESS) {
ha->num_ioctl--;
continue;
}
ret = ips_send_cmd(ha, scb);
if (ret == IPS_SUCCESS)
ips_putq_scb_head(&ha->scb_activelist, scb);
else
ha->num_ioctl--;
switch (ret) {
case IPS_FAILURE:
if (scb->scsi_cmd) {
scb->scsi_cmd->result = DID_ERROR << 16;
}
ips_freescb(ha, scb);
break;
case IPS_SUCCESS_IMM:
ips_freescb(ha, scb);
break;
default:
break;
} /* end case */
}
/*
* Send "Normal" I/O commands
*/
p = ha->scb_waitlist.head;
while ((p) && (scb = ips_getscb(ha))) {
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 02:05:09 +04:00
if ((scmd_channel(p) > 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
&& (ha->
[SCSI] use scmd_id(), scmd_channel() throughout code Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-25 02:05:09 +04:00
dcdb_active[scmd_channel(p) -
1] & (1 << scmd_id(p)))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_freescb(ha, scb);
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
p = (struct scsi_cmnd *) p->host_scribble;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
continue;
}
q = p;
SC = ips_removeq_wait(&ha->scb_waitlist, q);
if (intr == IPS_INTR_ON)
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_unlock(host->host_lock); /* Unlock HA after command is taken off queue */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
SC->result = DID_OK;
SC->host_scribble = NULL;
scb->target_id = SC->device->id;
scb->lun = SC->device->lun;
scb->bus = SC->device->channel;
scb->scsi_cmd = SC;
scb->breakup = 0;
scb->data_len = 0;
scb->callback = ipsintr_done;
scb->timeout = ips_cmd_timeout;
memset(&scb->cmd, 0, 16);
/* copy in the CDB */
memcpy(scb->cdb, SC->cmnd, SC->cmd_len);
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
scb->sg_count = scsi_dma_map(SC);
BUG_ON(scb->sg_count < 0);
if (scb->sg_count) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
struct scatterlist *sg;
int i;
scb->flags |= IPS_SCB_MAP_SG;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
scsi_for_each_sg(SC, sg, scb->sg_count, i) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ips_fill_scb_sg_single
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
(ha, sg_dma_address(sg), scb, i,
sg_dma_len(sg)) < 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
break;
}
scb->dcdb.transfer_length = scb->data_len;
} else {
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
scb->data_busaddr = 0L;
scb->sg_len = 0;
scb->data_len = 0;
scb->dcdb.transfer_length = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
scb->dcdb.cmd_attribute =
ips_command_direction[scb->scsi_cmd->cmnd[0]];
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
/* Allow a WRITE BUFFER Command to Have no Data */
/* This is Used by Tape Flash Utilites */
if ((scb->scsi_cmd->cmnd[0] == WRITE_BUFFER) &&
(scb->data_len == 0))
scb->dcdb.cmd_attribute = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (!(scb->dcdb.cmd_attribute & 0x3))
scb->dcdb.transfer_length = 0;
if (scb->data_len >= IPS_MAX_XFER) {
scb->dcdb.cmd_attribute |= IPS_TRANSFER64K;
scb->dcdb.transfer_length = 0;
}
if (intr == IPS_INTR_ON)
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_lock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ret = ips_send_cmd(ha, scb);
switch (ret) {
case IPS_SUCCESS:
ips_putq_scb_head(&ha->scb_activelist, scb);
break;
case IPS_FAILURE:
if (scb->scsi_cmd) {
scb->scsi_cmd->result = DID_ERROR << 16;
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
}
if (scb->bus)
ha->dcdb_active[scb->bus - 1] &=
~(1 << scb->target_id);
ips_freescb(ha, scb);
break;
case IPS_SUCCESS_IMM:
if (scb->scsi_cmd)
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
if (scb->bus)
ha->dcdb_active[scb->bus - 1] &=
~(1 << scb->target_id);
ips_freescb(ha, scb);
break;
default:
break;
} /* end case */
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
p = (struct scsi_cmnd *) p->host_scribble;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
} /* end while */
if (intr == IPS_INTR_ON)
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
spin_unlock(host->host_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/****************************************************************************/
/* */
/* Routine Name: ips_putq_scb_head */
/* */
/* Routine Description: */
/* */
/* Add an item to the head of the queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
static void
ips_putq_scb_head(ips_scb_queue_t * queue, ips_scb_t * item)
{
METHOD_TRACE("ips_putq_scb_head", 1);
if (!item)
return;
item->q_next = queue->head;
queue->head = item;
if (!queue->tail)
queue->tail = item;
queue->count++;
}
/****************************************************************************/
/* */
/* Routine Name: ips_removeq_scb_head */
/* */
/* Routine Description: */
/* */
/* Remove the head of the queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
static ips_scb_t *
ips_removeq_scb_head(ips_scb_queue_t * queue)
{
ips_scb_t *item;
METHOD_TRACE("ips_removeq_scb_head", 1);
item = queue->head;
if (!item) {
return (NULL);
}
queue->head = item->q_next;
item->q_next = NULL;
if (queue->tail == item)
queue->tail = NULL;
queue->count--;
return (item);
}
/****************************************************************************/
/* */
/* Routine Name: ips_removeq_scb */
/* */
/* Routine Description: */
/* */
/* Remove an item from a queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
static ips_scb_t *
ips_removeq_scb(ips_scb_queue_t * queue, ips_scb_t * item)
{
ips_scb_t *p;
METHOD_TRACE("ips_removeq_scb", 1);
if (!item)
return (NULL);
if (item == queue->head) {
return (ips_removeq_scb_head(queue));
}
p = queue->head;
while ((p) && (item != p->q_next))
p = p->q_next;
if (p) {
/* found a match */
p->q_next = item->q_next;
if (!item->q_next)
queue->tail = p;
item->q_next = NULL;
queue->count--;
return (item);
}
return (NULL);
}
/****************************************************************************/
/* */
/* Routine Name: ips_putq_wait_tail */
/* */
/* Routine Description: */
/* */
/* Add an item to the tail of the queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
sched/wait: Rename wait_queue_t => wait_queue_entry_t Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:13 +03:00
static void ips_putq_wait_tail(ips_wait_queue_entry_t *queue, struct scsi_cmnd *item)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
METHOD_TRACE("ips_putq_wait_tail", 1);
if (!item)
return;
item->host_scribble = NULL;
if (queue->tail)
queue->tail->host_scribble = (char *) item;
queue->tail = item;
if (!queue->head)
queue->head = item;
queue->count++;
}
/****************************************************************************/
/* */
/* Routine Name: ips_removeq_wait_head */
/* */
/* Routine Description: */
/* */
/* Remove the head of the queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
sched/wait: Rename wait_queue_t => wait_queue_entry_t Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:13 +03:00
static struct scsi_cmnd *ips_removeq_wait_head(ips_wait_queue_entry_t *queue)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
struct scsi_cmnd *item;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_removeq_wait_head", 1);
item = queue->head;
if (!item) {
return (NULL);
}
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
queue->head = (struct scsi_cmnd *) item->host_scribble;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
item->host_scribble = NULL;
if (queue->tail == item)
queue->tail = NULL;
queue->count--;
return (item);
}
/****************************************************************************/
/* */
/* Routine Name: ips_removeq_wait */
/* */
/* Routine Description: */
/* */
/* Remove an item from a queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
sched/wait: Rename wait_queue_t => wait_queue_entry_t Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:13 +03:00
static struct scsi_cmnd *ips_removeq_wait(ips_wait_queue_entry_t *queue,
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
struct scsi_cmnd *item)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
struct scsi_cmnd *p;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_removeq_wait", 1);
if (!item)
return (NULL);
if (item == queue->head) {
return (ips_removeq_wait_head(queue));
}
p = queue->head;
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
while ((p) && (item != (struct scsi_cmnd *) p->host_scribble))
p = (struct scsi_cmnd *) p->host_scribble;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (p) {
/* found a match */
p->host_scribble = item->host_scribble;
if (!item->host_scribble)
queue->tail = p;
item->host_scribble = NULL;
queue->count--;
return (item);
}
return (NULL);
}
/****************************************************************************/
/* */
/* Routine Name: ips_putq_copp_tail */
/* */
/* Routine Description: */
/* */
/* Add an item to the tail of the queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
static void
ips_putq_copp_tail(ips_copp_queue_t * queue, ips_copp_wait_item_t * item)
{
METHOD_TRACE("ips_putq_copp_tail", 1);
if (!item)
return;
item->next = NULL;
if (queue->tail)
queue->tail->next = item;
queue->tail = item;
if (!queue->head)
queue->head = item;
queue->count++;
}
/****************************************************************************/
/* */
/* Routine Name: ips_removeq_copp_head */
/* */
/* Routine Description: */
/* */
/* Remove the head of the queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
static ips_copp_wait_item_t *
ips_removeq_copp_head(ips_copp_queue_t * queue)
{
ips_copp_wait_item_t *item;
METHOD_TRACE("ips_removeq_copp_head", 1);
item = queue->head;
if (!item) {
return (NULL);
}
queue->head = item->next;
item->next = NULL;
if (queue->tail == item)
queue->tail = NULL;
queue->count--;
return (item);
}
/****************************************************************************/
/* */
/* Routine Name: ips_removeq_copp */
/* */
/* Routine Description: */
/* */
/* Remove an item from a queue */
/* */
/* ASSUMED to be called from within the HA lock */
/* */
/****************************************************************************/
static ips_copp_wait_item_t *
ips_removeq_copp(ips_copp_queue_t * queue, ips_copp_wait_item_t * item)
{
ips_copp_wait_item_t *p;
METHOD_TRACE("ips_removeq_copp", 1);
if (!item)
return (NULL);
if (item == queue->head) {
return (ips_removeq_copp_head(queue));
}
p = queue->head;
while ((p) && (item != p->next))
p = p->next;
if (p) {
/* found a match */
p->next = item->next;
if (!item->next)
queue->tail = p;
item->next = NULL;
queue->count--;
return (item);
}
return (NULL);
}
/****************************************************************************/
/* */
/* Routine Name: ipsintr_blocking */
/* */
/* Routine Description: */
/* */
/* Finalize an interrupt for internal commands */
/* */
/****************************************************************************/
static void
ipsintr_blocking(ips_ha_t * ha, ips_scb_t * scb)
{
METHOD_TRACE("ipsintr_blocking", 2);
ips_freescb(ha, scb);
if ((ha->waitflag == TRUE) && (ha->cmd_in_progress == scb->cdb[0])) {
ha->waitflag = FALSE;
return;
}
}
/****************************************************************************/
/* */
/* Routine Name: ipsintr_done */
/* */
/* Routine Description: */
/* */
/* Finalize an interrupt for non-internal commands */
/* */
/****************************************************************************/
static void
ipsintr_done(ips_ha_t * ha, ips_scb_t * scb)
{
METHOD_TRACE("ipsintr_done", 2);
if (!scb) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Spurious interrupt; scb NULL.\n");
return;
}
if (scb->scsi_cmd == NULL) {
/* unexpected interrupt */
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Spurious interrupt; scsi_cmd not set.\n");
return;
}
ips_done(ha, scb);
}
/****************************************************************************/
/* */
/* Routine Name: ips_done */
/* */
/* Routine Description: */
/* */
/* Do housekeeping on completed commands */
/* ASSUMED to be called form within the request lock */
/****************************************************************************/
static void
ips_done(ips_ha_t * ha, ips_scb_t * scb)
{
int ret;
METHOD_TRACE("ips_done", 1);
if (!scb)
return;
if ((scb->scsi_cmd) && (ips_is_passthru(scb->scsi_cmd))) {
ips_cleanup_passthru(ha, scb);
ha->num_ioctl--;
} else {
/*
* Check to see if this command had too much
* data and had to be broke up. If so, queue
* the rest of the data and continue.
*/
if ((scb->breakup) || (scb->sg_break)) {
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
struct scatterlist *sg;
ips: sg chaining support ips properly uses scsi_for_each_sg for the normal I/O path, however, the breakup path doesn't. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 17:24:14 +04:00
int i, sg_dma_index, ips_sg_index = 0;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* we had a data breakup */
scb->data_len = 0;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
sg = scsi_sglist(scb->scsi_cmd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
/* Spin forward to last dma chunk */
sg_dma_index = scb->breakup;
ips: sg chaining support ips properly uses scsi_for_each_sg for the normal I/O path, however, the breakup path doesn't. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 17:24:14 +04:00
for (i = 0; i < scb->breakup; i++)
sg = sg_next(sg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
/* Take care of possible partial on last chunk */
ips_fill_scb_sg_single(ha,
ips: sg chaining support ips properly uses scsi_for_each_sg for the normal I/O path, however, the breakup path doesn't. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 17:24:14 +04:00
sg_dma_address(sg),
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
scb, ips_sg_index++,
ips: sg chaining support ips properly uses scsi_for_each_sg for the normal I/O path, however, the breakup path doesn't. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 17:24:14 +04:00
sg_dma_len(sg));
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
for (; sg_dma_index < scsi_sg_count(scb->scsi_cmd);
ips: sg chaining support ips properly uses scsi_for_each_sg for the normal I/O path, however, the breakup path doesn't. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 17:24:14 +04:00
sg_dma_index++, sg = sg_next(sg)) {
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
if (ips_fill_scb_sg_single
(ha,
ips: sg chaining support ips properly uses scsi_for_each_sg for the normal I/O path, however, the breakup path doesn't. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 17:24:14 +04:00
sg_dma_address(sg),
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
scb, ips_sg_index++,
ips: sg chaining support ips properly uses scsi_for_each_sg for the normal I/O path, however, the breakup path doesn't. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16 17:24:14 +04:00
sg_dma_len(sg)) < 0)
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scb->dcdb.transfer_length = scb->data_len;
scb->dcdb.cmd_attribute |=
ips_command_direction[scb->scsi_cmd->cmnd[0]];
if (!(scb->dcdb.cmd_attribute & 0x3))
scb->dcdb.transfer_length = 0;
if (scb->data_len >= IPS_MAX_XFER) {
scb->dcdb.cmd_attribute |= IPS_TRANSFER64K;
scb->dcdb.transfer_length = 0;
}
ret = ips_send_cmd(ha, scb);
switch (ret) {
case IPS_FAILURE:
if (scb->scsi_cmd) {
scb->scsi_cmd->result = DID_ERROR << 16;
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
}
ips_freescb(ha, scb);
break;
case IPS_SUCCESS_IMM:
if (scb->scsi_cmd) {
scb->scsi_cmd->result = DID_ERROR << 16;
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
}
ips_freescb(ha, scb);
break;
default:
break;
} /* end case */
return;
}
} /* end if passthru */
if (scb->bus) {
ha->dcdb_active[scb->bus - 1] &= ~(1 << scb->target_id);
}
scb->scsi_cmd->scsi_done(scb->scsi_cmd);
ips_freescb(ha, scb);
}
/****************************************************************************/
/* */
/* Routine Name: ips_map_status */
/* */
/* Routine Description: */
/* */
/* Map Controller Error codes to Linux Error Codes */
/* */
/****************************************************************************/
static int
ips_map_status(ips_ha_t * ha, ips_scb_t * scb, ips_stat_t * sp)
{
int errcode;
int device_error;
uint32_t transfer_len;
IPS_DCDB_TABLE_TAPE *tapeDCDB;
[SCSI] ServeRAID: prevent seeing DADSI devices A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 21:17:55 +03:00
IPS_SCSI_INQ_DATA inquiryData;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_map_status", 1);
if (scb->bus) {
DEBUG_VAR(2,
"(%s%d) Physical device error (%d %d %d): %x %x, Sense Key: %x, ASC: %x, ASCQ: %x",
ips_name, ha->host_num,
scb->scsi_cmd->device->channel,
scb->scsi_cmd->device->id, scb->scsi_cmd->device->lun,
scb->basic_status, scb->extended_status,
scb->extended_status ==
IPS_ERR_CKCOND ? scb->dcdb.sense_info[2] & 0xf : 0,
scb->extended_status ==
IPS_ERR_CKCOND ? scb->dcdb.sense_info[12] : 0,
scb->extended_status ==
IPS_ERR_CKCOND ? scb->dcdb.sense_info[13] : 0);
}
/* default driver error */
errcode = DID_ERROR;
device_error = 0;
switch (scb->basic_status & IPS_GSC_STATUS_MASK) {
case IPS_CMD_TIMEOUT:
errcode = DID_TIME_OUT;
break;
case IPS_INVAL_OPCO:
case IPS_INVAL_CMD_BLK:
case IPS_INVAL_PARM_BLK:
case IPS_LD_ERROR:
case IPS_CMD_CMPLT_WERROR:
break;
case IPS_PHYS_DRV_ERROR:
switch (scb->extended_status) {
case IPS_ERR_SEL_TO:
if (scb->bus)
errcode = DID_NO_CONNECT;
break;
case IPS_ERR_OU_RUN:
if ((scb->cmd.dcdb.op_code == IPS_CMD_EXTENDED_DCDB) ||
(scb->cmd.dcdb.op_code ==
IPS_CMD_EXTENDED_DCDB_SG)) {
tapeDCDB = (IPS_DCDB_TABLE_TAPE *) & scb->dcdb;
transfer_len = tapeDCDB->transfer_length;
} else {
transfer_len =
(uint32_t) scb->dcdb.transfer_length;
}
if ((scb->bus) && (transfer_len < scb->data_len)) {
/* Underrun - set default to no error */
errcode = DID_OK;
/* Restrict access to physical DASD */
[SCSI] ServeRAID: prevent seeing DADSI devices A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 21:17:55 +03:00
if (scb->scsi_cmd->cmnd[0] == INQUIRY) {
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
ips_scmd_buf_read(scb->scsi_cmd,
[SCSI] ServeRAID: prevent seeing DADSI devices A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 21:17:55 +03:00
&inquiryData, sizeof (inquiryData));
if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK) {
errcode = DID_TIME_OUT;
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
} else
errcode = DID_ERROR;
break;
case IPS_ERR_RECOVERY:
/* don't fail recovered errors */
if (scb->bus)
errcode = DID_OK;
break;
case IPS_ERR_HOST_RESET:
case IPS_ERR_DEV_RESET:
errcode = DID_RESET;
break;
case IPS_ERR_CKCOND:
if (scb->bus) {
if ((scb->cmd.dcdb.op_code ==
IPS_CMD_EXTENDED_DCDB)
|| (scb->cmd.dcdb.op_code ==
IPS_CMD_EXTENDED_DCDB_SG)) {
tapeDCDB =
(IPS_DCDB_TABLE_TAPE *) & scb->dcdb;
scsi: ips: Avoid over-read of sense buffer In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy() avoid intentionally reading across neighboring array fields. scb->scsi_cmd->sense_buffer is 96 bytes: #define SCSI_SENSE_BUFFERSIZE 96 tapeDCDB->sense_info is 56 bytes: typedef struct { ... uint8_t sense_info[56]; } IPS_DCDB_TABLE_TAPE, ... scb->dcdb.sense_info is 64 bytes: typedef struct { ... uint8_t sense_info[64]; ... } IPS_DCDB_TABLE, ... Copying 96 bytes from either was copying beyond the end of the respective buffers, leading to potential memory content exposures. Correctly copy the actual buffer contents and zero pad the remaining bytes. Link: https://lore.kernel.org/r/20210616212408.1726812-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-17 00:24:08 +03:00
memcpy_and_pad(scb->scsi_cmd->sense_buffer,
SCSI_SENSE_BUFFERSIZE,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
tapeDCDB->sense_info,
scsi: ips: Avoid over-read of sense buffer In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy() avoid intentionally reading across neighboring array fields. scb->scsi_cmd->sense_buffer is 96 bytes: #define SCSI_SENSE_BUFFERSIZE 96 tapeDCDB->sense_info is 56 bytes: typedef struct { ... uint8_t sense_info[56]; } IPS_DCDB_TABLE_TAPE, ... scb->dcdb.sense_info is 64 bytes: typedef struct { ... uint8_t sense_info[64]; ... } IPS_DCDB_TABLE, ... Copying 96 bytes from either was copying beyond the end of the respective buffers, leading to potential memory content exposures. Correctly copy the actual buffer contents and zero pad the remaining bytes. Link: https://lore.kernel.org/r/20210616212408.1726812-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-17 00:24:08 +03:00
sizeof(tapeDCDB->sense_info), 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
} else {
scsi: ips: Avoid over-read of sense buffer In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy() avoid intentionally reading across neighboring array fields. scb->scsi_cmd->sense_buffer is 96 bytes: #define SCSI_SENSE_BUFFERSIZE 96 tapeDCDB->sense_info is 56 bytes: typedef struct { ... uint8_t sense_info[56]; } IPS_DCDB_TABLE_TAPE, ... scb->dcdb.sense_info is 64 bytes: typedef struct { ... uint8_t sense_info[64]; ... } IPS_DCDB_TABLE, ... Copying 96 bytes from either was copying beyond the end of the respective buffers, leading to potential memory content exposures. Correctly copy the actual buffer contents and zero pad the remaining bytes. Link: https://lore.kernel.org/r/20210616212408.1726812-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-17 00:24:08 +03:00
memcpy_and_pad(scb->scsi_cmd->sense_buffer,
SCSI_SENSE_BUFFERSIZE,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scb->dcdb.sense_info,
scsi: ips: Avoid over-read of sense buffer In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy() avoid intentionally reading across neighboring array fields. scb->scsi_cmd->sense_buffer is 96 bytes: #define SCSI_SENSE_BUFFERSIZE 96 tapeDCDB->sense_info is 56 bytes: typedef struct { ... uint8_t sense_info[56]; } IPS_DCDB_TABLE_TAPE, ... scb->dcdb.sense_info is 64 bytes: typedef struct { ... uint8_t sense_info[64]; ... } IPS_DCDB_TABLE, ... Copying 96 bytes from either was copying beyond the end of the respective buffers, leading to potential memory content exposures. Correctly copy the actual buffer contents and zero pad the remaining bytes. Link: https://lore.kernel.org/r/20210616212408.1726812-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-17 00:24:08 +03:00
sizeof(scb->dcdb.sense_info), 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
device_error = 2; /* check condition */
}
errcode = DID_OK;
break;
default:
errcode = DID_ERROR;
break;
} /* end switch */
} /* end switch */
scb->scsi_cmd->result = device_error | (errcode << 16);
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_send_wait */
/* */
/* Routine Description: */
/* */
/* Send a command to the controller and wait for it to return */
/* */
/* The FFDC Time Stamp use this function for the callback, but doesn't */
/* actually need to wait. */
/****************************************************************************/
static int
ips_send_wait(ips_ha_t * ha, ips_scb_t * scb, int timeout, int intr)
{
int ret;
METHOD_TRACE("ips_send_wait", 1);
if (intr != IPS_FFDC) { /* Won't be Waiting if this is a Time Stamp */
ha->waitflag = TRUE;
ha->cmd_in_progress = scb->cdb[0];
}
scb->callback = ipsintr_blocking;
ret = ips_send_cmd(ha, scb);
if ((ret == IPS_FAILURE) || (ret == IPS_SUCCESS_IMM))
return (ret);
if (intr != IPS_FFDC) /* Don't Wait around if this is a Time Stamp */
ret = ips_wait(ha, timeout, intr);
return (ret);
}
/****************************************************************************/
/* */
/* Routine Name: ips_scmd_buf_write */
/* */
/* Routine Description: */
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
/* Write data to struct scsi_cmnd request_buffer at proper offsets */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/****************************************************************************/
static void
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
ips_scmd_buf_write(struct scsi_cmnd *scmd, void *data, unsigned int count)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
[SCSI] ips: use sg buffer copy helper funcitons This rewrites ips_scmd_buf_write/read with scsi_sg_copy_from/to_buffer respectively. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Salyzyn, Mark <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-09 07:44:33 +03:00
unsigned long flags;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
[SCSI] ips: use sg buffer copy helper funcitons This rewrites ips_scmd_buf_write/read with scsi_sg_copy_from/to_buffer respectively. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Salyzyn, Mark <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-09 07:44:33 +03:00
local_irq_save(flags);
scsi_sg_copy_from_buffer(scmd, data, count);
local_irq_restore(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/****************************************************************************/
/* */
/* Routine Name: ips_scmd_buf_read */
/* */
/* Routine Description: */
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
/* Copy data from a struct scsi_cmnd to a new, linear buffer */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/****************************************************************************/
static void
[SCSI] scsi: Convertion to struct scsi_cmnd in ips-driver Converts the obsolete Scsi_Cmnd to struct scsi_cmnd in the ips-driver. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-02 16:56:23 +04:00
ips_scmd_buf_read(struct scsi_cmnd *scmd, void *data, unsigned int count)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
[SCSI] ips: use sg buffer copy helper funcitons This rewrites ips_scmd_buf_write/read with scsi_sg_copy_from/to_buffer respectively. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Salyzyn, Mark <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-09 07:44:33 +03:00
unsigned long flags;
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
[SCSI] ips: use sg buffer copy helper funcitons This rewrites ips_scmd_buf_write/read with scsi_sg_copy_from/to_buffer respectively. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Salyzyn, Mark <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-09 07:44:33 +03:00
local_irq_save(flags);
scsi_sg_copy_to_buffer(scmd, data, count);
local_irq_restore(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/****************************************************************************/
/* */
/* Routine Name: ips_send_cmd */
/* */
/* Routine Description: */
/* */
/* Map SCSI commands to ServeRAID commands for logical drives */
/* */
/****************************************************************************/
static int
ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb)
{
int ret;
char *sp;
int device_error;
IPS_DCDB_TABLE_TAPE *tapeDCDB;
int TimeOut;
METHOD_TRACE("ips_send_cmd", 1);
ret = IPS_SUCCESS;
if (!scb->scsi_cmd) {
/* internal command */
if (scb->bus > 0) {
/* Controller commands can't be issued */
/* to real devices -- fail them */
if ((ha->waitflag == TRUE) &&
(ha->cmd_in_progress == scb->cdb[0])) {
ha->waitflag = FALSE;
}
return (1);
}
} else if ((scb->bus == 0) && (!ips_is_passthru(scb->scsi_cmd))) {
/* command to logical bus -- interpret */
ret = IPS_SUCCESS_IMM;
switch (scb->scsi_cmd->cmnd[0]) {
case ALLOW_MEDIUM_REMOVAL:
case REZERO_UNIT:
case ERASE:
case WRITE_FILEMARKS:
case SPACE:
scb->scsi_cmd->result = DID_ERROR << 16;
break;
case START_STOP:
scb->scsi_cmd->result = DID_OK << 16;
scsi: ips: fix missing break in switch Add missing break statement in order to prevent the code from falling through to case TEST_UNIT_READY. Addresses-Coverity-ID: 1357338 ("Missing break in switch") Suggested-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-16 12:12:23 +03:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
case TEST_UNIT_READY:
case INQUIRY:
if (scb->target_id == IPS_ADAPTER_ID) {
/*
* Either we have a TUR
* or we have a SCSI inquiry
*/
if (scb->scsi_cmd->cmnd[0] == TEST_UNIT_READY)
scb->scsi_cmd->result = DID_OK << 16;
if (scb->scsi_cmd->cmnd[0] == INQUIRY) {
IPS_SCSI_INQ_DATA inquiry;
memset(&inquiry, 0,
sizeof (IPS_SCSI_INQ_DATA));
inquiry.DeviceType =
IPS_SCSI_INQ_TYPE_PROCESSOR;
inquiry.DeviceTypeQualifier =
IPS_SCSI_INQ_LU_CONNECTED;
inquiry.Version = IPS_SCSI_INQ_REV2;
inquiry.ResponseDataFormat =
IPS_SCSI_INQ_RD_REV2;
inquiry.AdditionalLength = 31;
inquiry.Flags[0] =
IPS_SCSI_INQ_Address16;
inquiry.Flags[1] =
IPS_SCSI_INQ_WBus16 |
IPS_SCSI_INQ_Sync;
scsi: ips: Convert strnlen() to memcpy() since result should not be NUL terminated Fixes the following W=1 kernel build warning(s): In file included from arch/arm/include/asm/io.h:23, from drivers/scsi/ips.c:164: In function ‘strncpy’, inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ NB: Lots of these - snipping for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:19 +03:00
memcpy(inquiry.VendorId, "IBM ",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
8);
scsi: ips: Convert strnlen() to memcpy() since result should not be NUL terminated Fixes the following W=1 kernel build warning(s): In file included from arch/arm/include/asm/io.h:23, from drivers/scsi/ips.c:164: In function ‘strncpy’, inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ NB: Lots of these - snipping for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:19 +03:00
memcpy(inquiry.ProductId,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
"SERVERAID ", 16);
scsi: ips: Convert strnlen() to memcpy() since result should not be NUL terminated Fixes the following W=1 kernel build warning(s): In file included from arch/arm/include/asm/io.h:23, from drivers/scsi/ips.c:164: In function ‘strncpy’, inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ NB: Lots of these - snipping for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:19 +03:00
memcpy(inquiry.ProductRevisionLevel,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
"1.00", 4);
ips_scmd_buf_write(scb->scsi_cmd,
&inquiry,
sizeof (inquiry));
scb->scsi_cmd->result = DID_OK << 16;
}
} else {
scb->cmd.logical_info.op_code = IPS_CMD_GET_LD_INFO;
scb->cmd.logical_info.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.logical_info.reserved = 0;
scb->cmd.logical_info.reserved2 = 0;
scb->data_len = sizeof (IPS_LD_INFO);
scb->data_busaddr = ha->logical_drive_info_dma_addr;
scb->flags = 0;
scb->cmd.logical_info.buffer_addr = scb->data_busaddr;
ret = IPS_SUCCESS;
}
break;
case REQUEST_SENSE:
ips_reqsen(ha, scb);
scb->scsi_cmd->result = DID_OK << 16;
break;
case READ_6:
case WRITE_6:
if (!scb->sg_len) {
scb->cmd.basic_io.op_code =
(scb->scsi_cmd->cmnd[0] ==
READ_6) ? IPS_CMD_READ : IPS_CMD_WRITE;
scb->cmd.basic_io.enhanced_sg = 0;
scb->cmd.basic_io.sg_addr =
cpu_to_le32(scb->data_busaddr);
} else {
scb->cmd.basic_io.op_code =
(scb->scsi_cmd->cmnd[0] ==
READ_6) ? IPS_CMD_READ_SG :
IPS_CMD_WRITE_SG;
scb->cmd.basic_io.enhanced_sg =
IPS_USE_ENH_SGLIST(ha) ? 0xFF : 0;
scb->cmd.basic_io.sg_addr =
cpu_to_le32(scb->sg_busaddr);
}
scb->cmd.basic_io.segment_4G = 0;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.basic_io.log_drv = scb->target_id;
scb->cmd.basic_io.sg_count = scb->sg_len;
if (scb->cmd.basic_io.lba)
[SCSI] aacraid, ips: leX_add_cpu conversion replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: "Salyzyn, Mark" <Mark_Salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-29 00:48:35 +03:00
le32_add_cpu(&scb->cmd.basic_io.lba,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
le16_to_cpu(scb->cmd.basic_io.
sector_count));
else
scb->cmd.basic_io.lba =
(((scb->scsi_cmd->
cmnd[1] & 0x1f) << 16) | (scb->scsi_cmd->
cmnd[2] << 8) |
(scb->scsi_cmd->cmnd[3]));
scb->cmd.basic_io.sector_count =
cpu_to_le16(scb->data_len / IPS_BLKSIZE);
if (le16_to_cpu(scb->cmd.basic_io.sector_count) == 0)
scb->cmd.basic_io.sector_count =
cpu_to_le16(256);
ret = IPS_SUCCESS;
break;
case READ_10:
case WRITE_10:
if (!scb->sg_len) {
scb->cmd.basic_io.op_code =
(scb->scsi_cmd->cmnd[0] ==
READ_10) ? IPS_CMD_READ : IPS_CMD_WRITE;
scb->cmd.basic_io.enhanced_sg = 0;
scb->cmd.basic_io.sg_addr =
cpu_to_le32(scb->data_busaddr);
} else {
scb->cmd.basic_io.op_code =
(scb->scsi_cmd->cmnd[0] ==
READ_10) ? IPS_CMD_READ_SG :
IPS_CMD_WRITE_SG;
scb->cmd.basic_io.enhanced_sg =
IPS_USE_ENH_SGLIST(ha) ? 0xFF : 0;
scb->cmd.basic_io.sg_addr =
cpu_to_le32(scb->sg_busaddr);
}
scb->cmd.basic_io.segment_4G = 0;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.basic_io.log_drv = scb->target_id;
scb->cmd.basic_io.sg_count = scb->sg_len;
if (scb->cmd.basic_io.lba)
[SCSI] aacraid, ips: leX_add_cpu conversion replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: "Salyzyn, Mark" <Mark_Salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-29 00:48:35 +03:00
le32_add_cpu(&scb->cmd.basic_io.lba,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
le16_to_cpu(scb->cmd.basic_io.
sector_count));
else
scb->cmd.basic_io.lba =
((scb->scsi_cmd->cmnd[2] << 24) | (scb->
scsi_cmd->
cmnd[3]
<< 16) |
(scb->scsi_cmd->cmnd[4] << 8) | scb->
scsi_cmd->cmnd[5]);
scb->cmd.basic_io.sector_count =
cpu_to_le16(scb->data_len / IPS_BLKSIZE);
if (cpu_to_le16(scb->cmd.basic_io.sector_count) == 0) {
/*
* This is a null condition
* we don't have to do anything
* so just return
*/
scb->scsi_cmd->result = DID_OK << 16;
} else
ret = IPS_SUCCESS;
break;
case RESERVE:
case RELEASE:
scb->scsi_cmd->result = DID_OK << 16;
break;
case MODE_SENSE:
scb->cmd.basic_io.op_code = IPS_CMD_ENQUIRY;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.basic_io.segment_4G = 0;
scb->cmd.basic_io.enhanced_sg = 0;
scb->data_len = sizeof (*ha->enq);
scb->cmd.basic_io.sg_addr = ha->enq_busaddr;
ret = IPS_SUCCESS;
break;
case READ_CAPACITY:
scb->cmd.logical_info.op_code = IPS_CMD_GET_LD_INFO;
scb->cmd.logical_info.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.logical_info.reserved = 0;
scb->cmd.logical_info.reserved2 = 0;
scb->cmd.logical_info.reserved3 = 0;
scb->data_len = sizeof (IPS_LD_INFO);
scb->data_busaddr = ha->logical_drive_info_dma_addr;
scb->flags = 0;
scb->cmd.logical_info.buffer_addr = scb->data_busaddr;
ret = IPS_SUCCESS;
break;
case SEND_DIAGNOSTIC:
case REASSIGN_BLOCKS:
case FORMAT_UNIT:
case SEEK_10:
case VERIFY:
case READ_DEFECT_DATA:
case READ_BUFFER:
case WRITE_BUFFER:
scb->scsi_cmd->result = DID_OK << 16;
break;
default:
/* Set the Return Info to appear like the Command was */
/* attempted, a Check Condition occurred, and Sense */
/* Data indicating an Invalid CDB OpCode is returned. */
sp = (char *) scb->scsi_cmd->sense_buffer;
sp[0] = 0x70; /* Error Code */
sp[2] = ILLEGAL_REQUEST; /* Sense Key 5 Illegal Req. */
sp[7] = 0x0A; /* Additional Sense Length */
sp[12] = 0x20; /* ASC = Invalid OpCode */
sp[13] = 0x00; /* ASCQ */
device_error = 2; /* Indicate Check Condition */
scb->scsi_cmd->result = device_error | (DID_OK << 16);
break;
} /* end switch */
}
/* end if */
if (ret == IPS_SUCCESS_IMM)
return (ret);
/* setup DCDB */
if (scb->bus > 0) {
/* If we already know the Device is Not there, no need to attempt a Command */
/* This also protects an NT FailOver Controller from getting CDB's sent to it */
if (ha->conf->dev[scb->bus - 1][scb->target_id].ucState == 0) {
scb->scsi_cmd->result = DID_NO_CONNECT << 16;
return (IPS_SUCCESS_IMM);
}
ha->dcdb_active[scb->bus - 1] |= (1 << scb->target_id);
scb->cmd.dcdb.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.dcdb.dcdb_address = cpu_to_le32(scb->scb_busaddr +
(unsigned long) &scb->
dcdb -
(unsigned long) scb);
scb->cmd.dcdb.reserved = 0;
scb->cmd.dcdb.reserved2 = 0;
scb->cmd.dcdb.reserved3 = 0;
scb->cmd.dcdb.segment_4G = 0;
scb->cmd.dcdb.enhanced_sg = 0;
scsi: ips: Use scsi_cmd_to_rq() instead of scsi_cmnd.request Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-26-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-10 02:03:28 +03:00
TimeOut = scsi_cmd_to_rq(scb->scsi_cmd)->timeout;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ha->subsys->param[4] & 0x00100000) { /* If NEW Tape DCDB is Supported */
if (!scb->sg_len) {
scb->cmd.dcdb.op_code = IPS_CMD_EXTENDED_DCDB;
} else {
scb->cmd.dcdb.op_code =
IPS_CMD_EXTENDED_DCDB_SG;
scb->cmd.dcdb.enhanced_sg =
IPS_USE_ENH_SGLIST(ha) ? 0xFF : 0;
}
tapeDCDB = (IPS_DCDB_TABLE_TAPE *) & scb->dcdb; /* Use Same Data Area as Old DCDB Struct */
tapeDCDB->device_address =
((scb->bus - 1) << 4) | scb->target_id;
tapeDCDB->cmd_attribute |= IPS_DISCONNECT_ALLOWED;
tapeDCDB->cmd_attribute &= ~IPS_TRANSFER64K; /* Always Turn OFF 64K Size Flag */
if (TimeOut) {
if (TimeOut < (10 * HZ))
tapeDCDB->cmd_attribute |= IPS_TIMEOUT10; /* TimeOut is 10 Seconds */
else if (TimeOut < (60 * HZ))
tapeDCDB->cmd_attribute |= IPS_TIMEOUT60; /* TimeOut is 60 Seconds */
else if (TimeOut < (1200 * HZ))
tapeDCDB->cmd_attribute |= IPS_TIMEOUT20M; /* TimeOut is 20 Minutes */
}
tapeDCDB->cdb_length = scb->scsi_cmd->cmd_len;
tapeDCDB->reserved_for_LUN = 0;
tapeDCDB->transfer_length = scb->data_len;
if (scb->cmd.dcdb.op_code == IPS_CMD_EXTENDED_DCDB_SG)
tapeDCDB->buffer_pointer =
cpu_to_le32(scb->sg_busaddr);
else
tapeDCDB->buffer_pointer =
cpu_to_le32(scb->data_busaddr);
tapeDCDB->sg_count = scb->sg_len;
tapeDCDB->sense_length = sizeof (tapeDCDB->sense_info);
tapeDCDB->scsi_status = 0;
tapeDCDB->reserved = 0;
memcpy(tapeDCDB->scsi_cdb, scb->scsi_cmd->cmnd,
scb->scsi_cmd->cmd_len);
} else {
if (!scb->sg_len) {
scb->cmd.dcdb.op_code = IPS_CMD_DCDB;
} else {
scb->cmd.dcdb.op_code = IPS_CMD_DCDB_SG;
scb->cmd.dcdb.enhanced_sg =
IPS_USE_ENH_SGLIST(ha) ? 0xFF : 0;
}
scb->dcdb.device_address =
((scb->bus - 1) << 4) | scb->target_id;
scb->dcdb.cmd_attribute |= IPS_DISCONNECT_ALLOWED;
if (TimeOut) {
if (TimeOut < (10 * HZ))
scb->dcdb.cmd_attribute |= IPS_TIMEOUT10; /* TimeOut is 10 Seconds */
else if (TimeOut < (60 * HZ))
scb->dcdb.cmd_attribute |= IPS_TIMEOUT60; /* TimeOut is 60 Seconds */
else if (TimeOut < (1200 * HZ))
scb->dcdb.cmd_attribute |= IPS_TIMEOUT20M; /* TimeOut is 20 Minutes */
}
scb->dcdb.transfer_length = scb->data_len;
if (scb->dcdb.cmd_attribute & IPS_TRANSFER64K)
scb->dcdb.transfer_length = 0;
if (scb->cmd.dcdb.op_code == IPS_CMD_DCDB_SG)
scb->dcdb.buffer_pointer =
cpu_to_le32(scb->sg_busaddr);
else
scb->dcdb.buffer_pointer =
cpu_to_le32(scb->data_busaddr);
scb->dcdb.cdb_length = scb->scsi_cmd->cmd_len;
scb->dcdb.sense_length = sizeof (scb->dcdb.sense_info);
scb->dcdb.sg_count = scb->sg_len;
scb->dcdb.reserved = 0;
memcpy(scb->dcdb.scsi_cdb, scb->scsi_cmd->cmnd,
scb->scsi_cmd->cmd_len);
scb->dcdb.scsi_status = 0;
scb->dcdb.reserved2[0] = 0;
scb->dcdb.reserved2[1] = 0;
scb->dcdb.reserved2[2] = 0;
}
}
return ((*ha->func.issue) (ha, scb));
}
/****************************************************************************/
/* */
/* Routine Name: ips_chk_status */
/* */
/* Routine Description: */
/* */
/* Check the status of commands to logical drives */
/* Assumed to be called with the HA lock */
/****************************************************************************/
static void
ips_chkstatus(ips_ha_t * ha, IPS_STATUS * pstatus)
{
ips_scb_t *scb;
ips_stat_t *sp;
uint8_t basic_status;
uint8_t ext_status;
int errcode;
[SCSI] ServeRAID: prevent seeing DADSI devices A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 21:17:55 +03:00
IPS_SCSI_INQ_DATA inquiryData;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_chkstatus", 1);
scb = &ha->scbs[pstatus->fields.command_id];
scb->basic_status = basic_status =
pstatus->fields.basic_status & IPS_BASIC_STATUS_MASK;
scb->extended_status = ext_status = pstatus->fields.extended_status;
sp = &ha->sp;
sp->residue_len = 0;
sp->scb_addr = (void *) scb;
/* Remove the item from the active queue */
ips_removeq_scb(&ha->scb_activelist, scb);
if (!scb->scsi_cmd)
/* internal commands are handled in do_ipsintr */
return;
DEBUG_VAR(2, "(%s%d) ips_chkstatus: cmd 0x%X id %d (%d %d %d)",
ips_name,
ha->host_num,
scb->cdb[0],
scb->cmd.basic_io.command_id,
scb->bus, scb->target_id, scb->lun);
if ((scb->scsi_cmd) && (ips_is_passthru(scb->scsi_cmd)))
/* passthru - just returns the raw result */
return;
errcode = DID_OK;
if (((basic_status & IPS_GSC_STATUS_MASK) == IPS_CMD_SUCCESS) ||
((basic_status & IPS_GSC_STATUS_MASK) == IPS_CMD_RECOVERED_ERROR)) {
if (scb->bus == 0) {
if ((basic_status & IPS_GSC_STATUS_MASK) ==
IPS_CMD_RECOVERED_ERROR) {
DEBUG_VAR(1,
"(%s%d) Recovered Logical Drive Error OpCode: %x, BSB: %x, ESB: %x",
ips_name, ha->host_num,
scb->cmd.basic_io.op_code,
basic_status, ext_status);
}
switch (scb->scsi_cmd->cmnd[0]) {
case ALLOW_MEDIUM_REMOVAL:
case REZERO_UNIT:
case ERASE:
case WRITE_FILEMARKS:
case SPACE:
errcode = DID_ERROR;
break;
case START_STOP:
break;
case TEST_UNIT_READY:
if (!ips_online(ha, scb)) {
errcode = DID_TIME_OUT;
}
break;
case INQUIRY:
if (ips_online(ha, scb)) {
ips_inquiry(ha, scb);
} else {
errcode = DID_TIME_OUT;
}
break;
case REQUEST_SENSE:
ips_reqsen(ha, scb);
break;
case READ_6:
case WRITE_6:
case READ_10:
case WRITE_10:
case RESERVE:
case RELEASE:
break;
case MODE_SENSE:
if (!ips_online(ha, scb)
|| !ips_msense(ha, scb)) {
errcode = DID_ERROR;
}
break;
case READ_CAPACITY:
if (ips_online(ha, scb))
ips_rdcap(ha, scb);
else {
errcode = DID_TIME_OUT;
}
break;
case SEND_DIAGNOSTIC:
case REASSIGN_BLOCKS:
break;
case FORMAT_UNIT:
errcode = DID_ERROR;
break;
case SEEK_10:
case VERIFY:
case READ_DEFECT_DATA:
case READ_BUFFER:
case WRITE_BUFFER:
break;
default:
errcode = DID_ERROR;
} /* end switch */
scb->scsi_cmd->result = errcode << 16;
} else { /* bus == 0 */
/* restrict access to physical drives */
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
if (scb->scsi_cmd->cmnd[0] == INQUIRY) {
ips_scmd_buf_read(scb->scsi_cmd,
[SCSI] ServeRAID: prevent seeing DADSI devices A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 21:17:55 +03:00
&inquiryData, sizeof (inquiryData));
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
if ((inquiryData.DeviceType & 0x1f) == TYPE_DISK)
[SCSI] ServeRAID: prevent seeing DADSI devices A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31 21:17:55 +03:00
scb->scsi_cmd->result = DID_TIME_OUT << 16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
} /* else */
} else { /* recovered error / success */
if (scb->bus == 0) {
DEBUG_VAR(1,
"(%s%d) Unrecovered Logical Drive Error OpCode: %x, BSB: %x, ESB: %x",
ips_name, ha->host_num,
scb->cmd.basic_io.op_code, basic_status,
ext_status);
}
ips_map_status(ha, scb, sp);
} /* else */
}
/****************************************************************************/
/* */
/* Routine Name: ips_online */
/* */
/* Routine Description: */
/* */
/* Determine if a logical drive is online */
/* */
/****************************************************************************/
static int
ips_online(ips_ha_t * ha, ips_scb_t * scb)
{
METHOD_TRACE("ips_online", 1);
if (scb->target_id >= IPS_MAX_LD)
return (0);
if ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1) {
memset(ha->logical_drive_info, 0, sizeof (IPS_LD_INFO));
return (0);
}
if (ha->logical_drive_info->drive_info[scb->target_id].state !=
IPS_LD_OFFLINE
&& ha->logical_drive_info->drive_info[scb->target_id].state !=
IPS_LD_FREE
&& ha->logical_drive_info->drive_info[scb->target_id].state !=
IPS_LD_CRS
&& ha->logical_drive_info->drive_info[scb->target_id].state !=
IPS_LD_SYS)
return (1);
else
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_inquiry */
/* */
/* Routine Description: */
/* */
/* Simulate an inquiry command to a logical drive */
/* */
/****************************************************************************/
static int
ips_inquiry(ips_ha_t * ha, ips_scb_t * scb)
{
IPS_SCSI_INQ_DATA inquiry;
METHOD_TRACE("ips_inquiry", 1);
memset(&inquiry, 0, sizeof (IPS_SCSI_INQ_DATA));
inquiry.DeviceType = IPS_SCSI_INQ_TYPE_DASD;
inquiry.DeviceTypeQualifier = IPS_SCSI_INQ_LU_CONNECTED;
inquiry.Version = IPS_SCSI_INQ_REV2;
inquiry.ResponseDataFormat = IPS_SCSI_INQ_RD_REV2;
inquiry.AdditionalLength = 31;
inquiry.Flags[0] = IPS_SCSI_INQ_Address16;
inquiry.Flags[1] =
IPS_SCSI_INQ_WBus16 | IPS_SCSI_INQ_Sync | IPS_SCSI_INQ_CmdQue;
scsi: ips: Convert strnlen() to memcpy() since result should not be NUL terminated Fixes the following W=1 kernel build warning(s): In file included from arch/arm/include/asm/io.h:23, from drivers/scsi/ips.c:164: In function ‘strncpy’, inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ NB: Lots of these - snipping for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:19 +03:00
memcpy(inquiry.VendorId, "IBM ", 8);
memcpy(inquiry.ProductId, "SERVERAID ", 16);
memcpy(inquiry.ProductRevisionLevel, "1.00", 4);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_scmd_buf_write(scb->scsi_cmd, &inquiry, sizeof (inquiry));
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_rdcap */
/* */
/* Routine Description: */
/* */
/* Simulate a read capacity command to a logical drive */
/* */
/****************************************************************************/
static int
ips_rdcap(ips_ha_t * ha, ips_scb_t * scb)
{
IPS_SCSI_CAPACITY cap;
METHOD_TRACE("ips_rdcap", 1);
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
if (scsi_bufflen(scb->scsi_cmd) < 8)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return (0);
cap.lba =
cpu_to_be32(le32_to_cpu
(ha->logical_drive_info->
drive_info[scb->target_id].sector_count) - 1);
cap.len = cpu_to_be32((uint32_t) IPS_BLKSIZE);
ips_scmd_buf_write(scb->scsi_cmd, &cap, sizeof (cap));
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_msense */
/* */
/* Routine Description: */
/* */
/* Simulate a mode sense command to a logical drive */
/* */
/****************************************************************************/
static int
ips_msense(ips_ha_t * ha, ips_scb_t * scb)
{
uint16_t heads;
uint16_t sectors;
uint32_t cylinders;
IPS_SCSI_MODE_PAGE_DATA mdata;
METHOD_TRACE("ips_msense", 1);
if (le32_to_cpu(ha->enq->ulDriveSize[scb->target_id]) > 0x400000 &&
(ha->enq->ucMiscFlag & 0x8) == 0) {
heads = IPS_NORM_HEADS;
sectors = IPS_NORM_SECTORS;
} else {
heads = IPS_COMP_HEADS;
sectors = IPS_COMP_SECTORS;
}
cylinders =
(le32_to_cpu(ha->enq->ulDriveSize[scb->target_id]) -
1) / (heads * sectors);
memset(&mdata, 0, sizeof (IPS_SCSI_MODE_PAGE_DATA));
mdata.hdr.BlockDescLength = 8;
switch (scb->scsi_cmd->cmnd[2] & 0x3f) {
case 0x03: /* page 3 */
mdata.pdata.pg3.PageCode = 3;
mdata.pdata.pg3.PageLength = sizeof (IPS_SCSI_MODE_PAGE3);
mdata.hdr.DataLength =
3 + mdata.hdr.BlockDescLength + mdata.pdata.pg3.PageLength;
mdata.pdata.pg3.TracksPerZone = 0;
mdata.pdata.pg3.AltSectorsPerZone = 0;
mdata.pdata.pg3.AltTracksPerZone = 0;
mdata.pdata.pg3.AltTracksPerVolume = 0;
mdata.pdata.pg3.SectorsPerTrack = cpu_to_be16(sectors);
mdata.pdata.pg3.BytesPerSector = cpu_to_be16(IPS_BLKSIZE);
mdata.pdata.pg3.Interleave = cpu_to_be16(1);
mdata.pdata.pg3.TrackSkew = 0;
mdata.pdata.pg3.CylinderSkew = 0;
mdata.pdata.pg3.flags = IPS_SCSI_MP3_SoftSector;
break;
case 0x4:
mdata.pdata.pg4.PageCode = 4;
mdata.pdata.pg4.PageLength = sizeof (IPS_SCSI_MODE_PAGE4);
mdata.hdr.DataLength =
3 + mdata.hdr.BlockDescLength + mdata.pdata.pg4.PageLength;
mdata.pdata.pg4.CylindersHigh =
cpu_to_be16((cylinders >> 8) & 0xFFFF);
mdata.pdata.pg4.CylindersLow = (cylinders & 0xFF);
mdata.pdata.pg4.Heads = heads;
mdata.pdata.pg4.WritePrecompHigh = 0;
mdata.pdata.pg4.WritePrecompLow = 0;
mdata.pdata.pg4.ReducedWriteCurrentHigh = 0;
mdata.pdata.pg4.ReducedWriteCurrentLow = 0;
mdata.pdata.pg4.StepRate = cpu_to_be16(1);
mdata.pdata.pg4.LandingZoneHigh = 0;
mdata.pdata.pg4.LandingZoneLow = 0;
mdata.pdata.pg4.flags = 0;
mdata.pdata.pg4.RotationalOffset = 0;
mdata.pdata.pg4.MediumRotationRate = 0;
break;
case 0x8:
mdata.pdata.pg8.PageCode = 8;
mdata.pdata.pg8.PageLength = sizeof (IPS_SCSI_MODE_PAGE8);
mdata.hdr.DataLength =
3 + mdata.hdr.BlockDescLength + mdata.pdata.pg8.PageLength;
/* everything else is left set to 0 */
break;
default:
return (0);
} /* end switch */
ips_scmd_buf_write(scb->scsi_cmd, &mdata, sizeof (mdata));
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_reqsen */
/* */
/* Routine Description: */
/* */
/* Simulate a request sense command to a logical drive */
/* */
/****************************************************************************/
static int
ips_reqsen(ips_ha_t * ha, ips_scb_t * scb)
{
IPS_SCSI_REQSEN reqsen;
METHOD_TRACE("ips_reqsen", 1);
memset(&reqsen, 0, sizeof (IPS_SCSI_REQSEN));
reqsen.ResponseCode =
IPS_SCSI_REQSEN_VALID | IPS_SCSI_REQSEN_CURRENT_ERR;
reqsen.AdditionalLength = 10;
reqsen.AdditionalSenseCode = IPS_SCSI_REQSEN_NO_SENSE;
reqsen.AdditionalSenseCodeQual = IPS_SCSI_REQSEN_NO_SENSE;
ips_scmd_buf_write(scb->scsi_cmd, &reqsen, sizeof (reqsen));
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_free */
/* */
/* Routine Description: */
/* */
/* Free any allocated space for this controller */
/* */
/****************************************************************************/
static void
ips_free(ips_ha_t * ha)
{
METHOD_TRACE("ips_free", 1);
if (ha) {
if (ha->enq) {
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev, sizeof(IPS_ENQ),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->enq, ha->enq_busaddr);
ha->enq = NULL;
}
[PATCH] kfree cleanup: drivers/scsi This is the drivers/scsi/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 12:01:26 +03:00
kfree(ha->conf);
ha->conf = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ha->adapt) {
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
sizeof (IPS_ADAPTER) +
sizeof (IPS_IO_CMD), ha->adapt,
ha->adapt->hw_status_start);
ha->adapt = NULL;
}
if (ha->logical_drive_info) {
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
sizeof (IPS_LD_INFO),
ha->logical_drive_info,
ha->logical_drive_info_dma_addr);
ha->logical_drive_info = NULL;
}
[PATCH] kfree cleanup: drivers/scsi This is the drivers/scsi/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 12:01:26 +03:00
kfree(ha->nvram);
ha->nvram = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[PATCH] kfree cleanup: drivers/scsi This is the drivers/scsi/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 12:01:26 +03:00
kfree(ha->subsys);
ha->subsys = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ha->ioctl_data) {
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev, ha->ioctl_len,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->ioctl_data, ha->ioctl_busaddr);
ha->ioctl_data = NULL;
ha->ioctl_datasize = 0;
ha->ioctl_len = 0;
}
ips_deallocatescbs(ha, ha->max_cmds);
/* free memory mapped (if applicable) */
if (ha->mem_ptr) {
iounmap(ha->ioremap_ptr);
ha->ioremap_ptr = NULL;
ha->mem_ptr = NULL;
}
ha->mem_addr = 0;
}
}
/****************************************************************************/
/* */
/* Routine Name: ips_deallocatescbs */
/* */
/* Routine Description: */
/* */
/* Free the command blocks */
/* */
/****************************************************************************/
static int
ips_deallocatescbs(ips_ha_t * ha, int cmds)
{
if (ha->scbs) {
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_SGLIST_SIZE(ha) * IPS_MAX_SG * cmds,
ha->scbs->sg_list.list,
ha->scbs->sg_busaddr);
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev, sizeof (ips_scb_t) * cmds,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->scbs, ha->scbs->scb_busaddr);
ha->scbs = NULL;
} /* end if */
return 1;
}
/****************************************************************************/
/* */
/* Routine Name: ips_allocatescbs */
/* */
/* Routine Description: */
/* */
/* Allocate the command blocks */
/* */
/****************************************************************************/
static int
ips_allocatescbs(ips_ha_t * ha)
{
ips_scb_t *scb_p;
IPS_SG_LIST ips_sg;
int i;
dma_addr_t command_dma, sg_dma;
METHOD_TRACE("ips_allocatescbs", 1);
/* Allocate memory for the SCBs */
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ha->scbs = dma_alloc_coherent(&ha->pcidev->dev,
ha->max_cmds * sizeof (ips_scb_t),
&command_dma, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ha->scbs == NULL)
return 0;
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ips_sg.list = dma_alloc_coherent(&ha->pcidev->dev,
IPS_SGLIST_SIZE(ha) * IPS_MAX_SG * ha->max_cmds,
&sg_dma, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ips_sg.list == NULL) {
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->max_cmds * sizeof (ips_scb_t), ha->scbs,
command_dma);
return 0;
}
memset(ha->scbs, 0, ha->max_cmds * sizeof (ips_scb_t));
for (i = 0; i < ha->max_cmds; i++) {
scb_p = &ha->scbs[i];
scb_p->scb_busaddr = command_dma + sizeof (ips_scb_t) * i;
/* set up S/G list */
if (IPS_USE_ENH_SGLIST(ha)) {
scb_p->sg_list.enh_list =
ips_sg.enh_list + i * IPS_MAX_SG;
scb_p->sg_busaddr =
sg_dma + IPS_SGLIST_SIZE(ha) * IPS_MAX_SG * i;
} else {
scb_p->sg_list.std_list =
ips_sg.std_list + i * IPS_MAX_SG;
scb_p->sg_busaddr =
sg_dma + IPS_SGLIST_SIZE(ha) * IPS_MAX_SG * i;
}
/* add to the free list */
if (i < ha->max_cmds - 1) {
scb_p->q_next = ha->scb_freelist;
ha->scb_freelist = scb_p;
}
}
/* success */
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_init_scb */
/* */
/* Routine Description: */
/* */
/* Initialize a CCB to default values */
/* */
/****************************************************************************/
static void
ips_init_scb(ips_ha_t * ha, ips_scb_t * scb)
{
IPS_SG_LIST sg_list;
uint32_t cmd_busaddr, sg_busaddr;
METHOD_TRACE("ips_init_scb", 1);
if (scb == NULL)
return;
sg_list.list = scb->sg_list.list;
cmd_busaddr = scb->scb_busaddr;
sg_busaddr = scb->sg_busaddr;
/* zero fill */
memset(scb, 0, sizeof (ips_scb_t));
memset(ha->dummy, 0, sizeof (IPS_IO_CMD));
/* Initialize dummy command bucket */
ha->dummy->op_code = 0xFF;
ha->dummy->ccsar = cpu_to_le32(ha->adapt->hw_status_start
+ sizeof (IPS_ADAPTER));
ha->dummy->command_id = IPS_MAX_CMDS;
/* set bus address of scb */
scb->scb_busaddr = cmd_busaddr;
scb->sg_busaddr = sg_busaddr;
scb->sg_list.list = sg_list.list;
/* Neptune Fix */
scb->cmd.basic_io.cccr = cpu_to_le32((uint32_t) IPS_BIT_ILE);
scb->cmd.basic_io.ccsar = cpu_to_le32(ha->adapt->hw_status_start
+ sizeof (IPS_ADAPTER));
}
/****************************************************************************/
/* */
/* Routine Name: ips_get_scb */
/* */
/* Routine Description: */
/* */
/* Initialize a CCB to default values */
/* */
treewide: Fix typos in various parts of the kernel, and fix some comments. The below patch fixes some typos in various parts of the kernel, as well as fixes some comments. Please let me know if I missed anything, and I will try to get it changed and resent. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-29 08:31:00 +04:00
/* ASSUMED to be called from within a lock */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* */
/****************************************************************************/
static ips_scb_t *
ips_getscb(ips_ha_t * ha)
{
ips_scb_t *scb;
METHOD_TRACE("ips_getscb", 1);
if ((scb = ha->scb_freelist) == NULL) {
return (NULL);
}
ha->scb_freelist = scb->q_next;
scb->flags = 0;
scb->q_next = NULL;
ips_init_scb(ha, scb);
return (scb);
}
/****************************************************************************/
/* */
/* Routine Name: ips_free_scb */
/* */
/* Routine Description: */
/* */
/* Return an unused CCB back to the free list */
/* */
/* ASSUMED to be called from within a lock */
/* */
/****************************************************************************/
static void
ips_freescb(ips_ha_t * ha, ips_scb_t * scb)
{
METHOD_TRACE("ips_freescb", 1);
if (scb->flags & IPS_SCB_MAP_SG)
[SCSI] ips: convert to use the data buffer accessors - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-13 18:27:09 +04:00
scsi_dma_unmap(scb->scsi_cmd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
else if (scb->flags & IPS_SCB_MAP_SINGLE)
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_unmap_single(&ha->pcidev->dev, scb->data_busaddr,
scb->data_len, IPS_DMA_DIR(scb));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* check to make sure this is not our "special" scb */
if (IPS_COMMAND_ID(ha, scb) < (ha->max_cmds - 1)) {
scb->q_next = ha->scb_freelist;
ha->scb_freelist = scb;
}
}
/****************************************************************************/
/* */
/* Routine Name: ips_isinit_copperhead */
/* */
/* Routine Description: */
/* */
/* Is controller initialized ? */
/* */
/****************************************************************************/
static int
ips_isinit_copperhead(ips_ha_t * ha)
{
uint8_t scpr;
uint8_t isr;
METHOD_TRACE("ips_isinit_copperhead", 1);
isr = inb(ha->io_addr + IPS_REG_HISR);
scpr = inb(ha->io_addr + IPS_REG_SCPR);
if (((isr & IPS_BIT_EI) == 0) && ((scpr & IPS_BIT_EBM) == 0))
return (0);
else
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_isinit_copperhead_memio */
/* */
/* Routine Description: */
/* */
/* Is controller initialized ? */
/* */
/****************************************************************************/
static int
ips_isinit_copperhead_memio(ips_ha_t * ha)
{
uint8_t isr = 0;
uint8_t scpr;
METHOD_TRACE("ips_is_init_copperhead_memio", 1);
isr = readb(ha->mem_ptr + IPS_REG_HISR);
scpr = readb(ha->mem_ptr + IPS_REG_SCPR);
if (((isr & IPS_BIT_EI) == 0) && ((scpr & IPS_BIT_EBM) == 0))
return (0);
else
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_isinit_morpheus */
/* */
/* Routine Description: */
/* */
/* Is controller initialized ? */
/* */
/****************************************************************************/
static int
ips_isinit_morpheus(ips_ha_t * ha)
{
uint32_t post;
uint32_t bits;
METHOD_TRACE("ips_is_init_morpheus", 1);
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
if (ips_isintr_morpheus(ha))
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
ips_flush_and_reset(ha);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
post = readl(ha->mem_ptr + IPS_REG_I960_MSG0);
bits = readl(ha->mem_ptr + IPS_REG_I2O_HIR);
if (post == 0)
return (0);
else if (bits & 0x3)
return (0);
else
return (1);
}
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
/****************************************************************************/
/* */
/* Routine Name: ips_flush_and_reset */
/* */
/* Routine Description: */
/* */
/* Perform cleanup ( FLUSH and RESET ) when the adapter is in an unknown */
/* state ( was trying to INIT and an interrupt was already pending ) ... */
/* */
/****************************************************************************/
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
static void
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
ips_flush_and_reset(ips_ha_t *ha)
{
ips_scb_t *scb;
int ret;
int time;
int done;
dma_addr_t command_dma;
/* Create a usuable SCB */
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
scb = dma_alloc_coherent(&ha->pcidev->dev, sizeof(ips_scb_t),
&command_dma, GFP_KERNEL);
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
if (scb) {
memset(scb, 0, sizeof(ips_scb_t));
ips_init_scb(ha, scb);
scb->scb_busaddr = command_dma;
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_FLUSH;
scb->cmd.flush_cache.op_code = IPS_CMD_FLUSH;
scb->cmd.flush_cache.command_id = IPS_MAX_CMDS; /* Use an ID that would otherwise not exist */
scb->cmd.flush_cache.state = IPS_NORM_STATE;
scb->cmd.flush_cache.reserved = 0;
scb->cmd.flush_cache.reserved2 = 0;
scb->cmd.flush_cache.reserved3 = 0;
scb->cmd.flush_cache.reserved4 = 0;
ret = ips_send_cmd(ha, scb); /* Send the Flush Command */
if (ret == IPS_SUCCESS) {
time = 60 * IPS_ONE_SEC; /* Max Wait time is 60 seconds */
done = 0;
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
while ((time > 0) && (!done)) {
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
done = ips_poll_for_flush_complete(ha);
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
/* This may look evil, but it's only done during extremely rare start-up conditions ! */
udelay(1000);
time--;
}
}
}
/* Now RESET and INIT the adapter */
(*ha->func.reset) (ha);
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
dma_free_coherent(&ha->pcidev->dev, sizeof(ips_scb_t), scb, command_dma);
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
return;
}
/****************************************************************************/
/* */
/* Routine Name: ips_poll_for_flush_complete */
/* */
/* Routine Description: */
/* */
/* Poll for the Flush Command issued by ips_flush_and_reset() to complete */
/* All other responses are just taken off the queue and ignored */
/* */
/****************************************************************************/
static int
ips_poll_for_flush_complete(ips_ha_t * ha)
{
IPS_STATUS cstatus;
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
while (TRUE) {
cstatus.value = (*ha->func.statupd) (ha);
if (cstatus.value == 0xffffffff) /* If No Interrupt to process */
break;
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
/* Success is when we see the Flush Command ID */
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
if (cstatus.fields.command_id == IPS_MAX_CMDS)
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
return 1;
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
}
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
return 0;
Fix ips.c compile It looks like one of the ips patches was missing a closing brace in a function Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-05 08:22:55 +03:00
}
[SCSI] ips: Fix initialization bug with kdump If I/O is active on the adapter, and an unexpected interrupt is pending during initialization, the driver blows it's brains out. Since the driver didn't initiate the I/O, the data in it's internal tables will contain NULL pointers. When this condition is detected, a "flush cache and reset" is performed. The flush cache allows any pending "lazy writes" that the adapter is processing to complete ( a "must have" for a RAID adapter ) and the reset puts the adapter back into a known, good state. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-29 18:44:34 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/****************************************************************************/
/* */
/* Routine Name: ips_enable_int_copperhead */
/* */
/* Routine Description: */
/* Turn on interrupts */
/* */
/****************************************************************************/
static void
ips_enable_int_copperhead(ips_ha_t * ha)
{
METHOD_TRACE("ips_enable_int_copperhead", 1);
outb(ha->io_addr + IPS_REG_HISR, IPS_BIT_EI);
inb(ha->io_addr + IPS_REG_HISR); /*Ensure PCI Posting Completes*/
}
/****************************************************************************/
/* */
/* Routine Name: ips_enable_int_copperhead_memio */
/* */
/* Routine Description: */
/* Turn on interrupts */
/* */
/****************************************************************************/
static void
ips_enable_int_copperhead_memio(ips_ha_t * ha)
{
METHOD_TRACE("ips_enable_int_copperhead_memio", 1);
writeb(IPS_BIT_EI, ha->mem_ptr + IPS_REG_HISR);
readb(ha->mem_ptr + IPS_REG_HISR); /*Ensure PCI Posting Completes*/
}
/****************************************************************************/
/* */
/* Routine Name: ips_enable_int_morpheus */
/* */
/* Routine Description: */
/* Turn on interrupts */
/* */
/****************************************************************************/
static void
ips_enable_int_morpheus(ips_ha_t * ha)
{
uint32_t Oimr;
METHOD_TRACE("ips_enable_int_morpheus", 1);
Oimr = readl(ha->mem_ptr + IPS_REG_I960_OIMR);
Oimr &= ~0x08;
writel(Oimr, ha->mem_ptr + IPS_REG_I960_OIMR);
readl(ha->mem_ptr + IPS_REG_I960_OIMR); /*Ensure PCI Posting Completes*/
}
/****************************************************************************/
/* */
/* Routine Name: ips_init_copperhead */
/* */
/* Routine Description: */
/* */
/* Initialize a copperhead controller */
/* */
/****************************************************************************/
static int
ips_init_copperhead(ips_ha_t * ha)
{
uint8_t Isr;
uint8_t Cbsp;
uint8_t PostByte[IPS_MAX_POST_BYTES];
int i, j;
METHOD_TRACE("ips_init_copperhead", 1);
for (i = 0; i < IPS_MAX_POST_BYTES; i++) {
for (j = 0; j < 45; j++) {
Isr = inb(ha->io_addr + IPS_REG_HISR);
if (Isr & IPS_BIT_GHI)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (j >= 45)
/* error occurred */
return (0);
PostByte[i] = inb(ha->io_addr + IPS_REG_ISPR);
outb(Isr, ha->io_addr + IPS_REG_HISR);
}
if (PostByte[0] < IPS_GOOD_POST_STATUS) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"reset controller fails (post status %x %x).\n",
PostByte[0], PostByte[1]);
return (0);
}
for (i = 0; i < IPS_MAX_CONFIG_BYTES; i++) {
for (j = 0; j < 240; j++) {
Isr = inb(ha->io_addr + IPS_REG_HISR);
if (Isr & IPS_BIT_GHI)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (j >= 240)
/* error occurred */
return (0);
scsi: ips: Remove some set but unused variables Intentionally keeping all register reads/writes. Fixes the following W=1 kernel build warning(s): drivers/scsi/ips.c: In function ‘ips_init_copperhead’: drivers/scsi/ips.c:4700:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable] 4700 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES]; | ^~~~~~~~~~ drivers/scsi/ips.c: In function ‘ips_init_copperhead_memio’: drivers/scsi/ips.c:4794:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable] 4794 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES]; | ^~~~~~~~~~ drivers/scsi/ips.c: In function ‘ips_init_phase1’: drivers/scsi/ips.c:6839:10: warning: variable ‘func’ set but not used [-Wunused-but-set-variable] 6839 | uint8_t func; | ^~~~ drivers/scsi/ips.c:6838:10: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable] 6838 | uint8_t bus; | ^~~ Link: https://lore.kernel.org/r/20200723122446.1329773-13-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:18 +03:00
inb(ha->io_addr + IPS_REG_ISPR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
outb(Isr, ha->io_addr + IPS_REG_HISR);
}
for (i = 0; i < 240; i++) {
Cbsp = inb(ha->io_addr + IPS_REG_CBSP);
if ((Cbsp & IPS_BIT_OP) == 0)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (i >= 240)
/* reset failed */
return (0);
/* setup CCCR */
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(0x1010, ha->io_addr + IPS_REG_CCCR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* Enable busmastering */
outb(IPS_BIT_EBM, ha->io_addr + IPS_REG_SCPR);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* fix for anaconda64 */
outl(0, ha->io_addr + IPS_REG_NDAE);
/* Enable interrupts */
outb(IPS_BIT_EI, ha->io_addr + IPS_REG_HISR);
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_init_copperhead_memio */
/* */
/* Routine Description: */
/* */
/* Initialize a copperhead controller with memory mapped I/O */
/* */
/****************************************************************************/
static int
ips_init_copperhead_memio(ips_ha_t * ha)
{
uint8_t Isr = 0;
uint8_t Cbsp;
uint8_t PostByte[IPS_MAX_POST_BYTES];
int i, j;
METHOD_TRACE("ips_init_copperhead_memio", 1);
for (i = 0; i < IPS_MAX_POST_BYTES; i++) {
for (j = 0; j < 45; j++) {
Isr = readb(ha->mem_ptr + IPS_REG_HISR);
if (Isr & IPS_BIT_GHI)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (j >= 45)
/* error occurred */
return (0);
PostByte[i] = readb(ha->mem_ptr + IPS_REG_ISPR);
writeb(Isr, ha->mem_ptr + IPS_REG_HISR);
}
if (PostByte[0] < IPS_GOOD_POST_STATUS) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"reset controller fails (post status %x %x).\n",
PostByte[0], PostByte[1]);
return (0);
}
for (i = 0; i < IPS_MAX_CONFIG_BYTES; i++) {
for (j = 0; j < 240; j++) {
Isr = readb(ha->mem_ptr + IPS_REG_HISR);
if (Isr & IPS_BIT_GHI)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (j >= 240)
/* error occurred */
return (0);
scsi: ips: Remove some set but unused variables Intentionally keeping all register reads/writes. Fixes the following W=1 kernel build warning(s): drivers/scsi/ips.c: In function ‘ips_init_copperhead’: drivers/scsi/ips.c:4700:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable] 4700 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES]; | ^~~~~~~~~~ drivers/scsi/ips.c: In function ‘ips_init_copperhead_memio’: drivers/scsi/ips.c:4794:10: warning: variable ‘ConfigByte’ set but not used [-Wunused-but-set-variable] 4794 | uint8_t ConfigByte[IPS_MAX_CONFIG_BYTES]; | ^~~~~~~~~~ drivers/scsi/ips.c: In function ‘ips_init_phase1’: drivers/scsi/ips.c:6839:10: warning: variable ‘func’ set but not used [-Wunused-but-set-variable] 6839 | uint8_t func; | ^~~~ drivers/scsi/ips.c:6838:10: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable] 6838 | uint8_t bus; | ^~~ Link: https://lore.kernel.org/r/20200723122446.1329773-13-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:18 +03:00
readb(ha->mem_ptr + IPS_REG_ISPR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
writeb(Isr, ha->mem_ptr + IPS_REG_HISR);
}
for (i = 0; i < 240; i++) {
Cbsp = readb(ha->mem_ptr + IPS_REG_CBSP);
if ((Cbsp & IPS_BIT_OP) == 0)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (i >= 240)
/* error occurred */
return (0);
/* setup CCCR */
writel(0x1010, ha->mem_ptr + IPS_REG_CCCR);
/* Enable busmastering */
writeb(IPS_BIT_EBM, ha->mem_ptr + IPS_REG_SCPR);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* fix for anaconda64 */
writel(0, ha->mem_ptr + IPS_REG_NDAE);
/* Enable interrupts */
writeb(IPS_BIT_EI, ha->mem_ptr + IPS_REG_HISR);
/* if we get here then everything went OK */
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_init_morpheus */
/* */
/* Routine Description: */
/* */
/* Initialize a morpheus controller */
/* */
/****************************************************************************/
static int
ips_init_morpheus(ips_ha_t * ha)
{
uint32_t Post;
uint32_t Config;
uint32_t Isr;
uint32_t Oimr;
int i;
METHOD_TRACE("ips_init_morpheus", 1);
/* Wait up to 45 secs for Post */
for (i = 0; i < 45; i++) {
Isr = readl(ha->mem_ptr + IPS_REG_I2O_HIR);
if (Isr & IPS_BIT_I960_MSG0I)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (i >= 45) {
/* error occurred */
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"timeout waiting for post.\n");
return (0);
}
Post = readl(ha->mem_ptr + IPS_REG_I960_MSG0);
if (Post == 0x4F00) { /* If Flashing the Battery PIC */
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Flashing Battery PIC, Please wait ...\n");
/* Clear the interrupt bit */
Isr = (uint32_t) IPS_BIT_I960_MSG0I;
writel(Isr, ha->mem_ptr + IPS_REG_I2O_HIR);
for (i = 0; i < 120; i++) { /* Wait Up to 2 Min. for Completion */
Post = readl(ha->mem_ptr + IPS_REG_I960_MSG0);
if (Post != 0x4F00)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (i >= 120) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"timeout waiting for Battery PIC Flash\n");
return (0);
}
}
/* Clear the interrupt bit */
Isr = (uint32_t) IPS_BIT_I960_MSG0I;
writel(Isr, ha->mem_ptr + IPS_REG_I2O_HIR);
if (Post < (IPS_GOOD_POST_STATUS << 8)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"reset controller fails (post status %x).\n", Post);
return (0);
}
/* Wait up to 240 secs for config bytes */
for (i = 0; i < 240; i++) {
Isr = readl(ha->mem_ptr + IPS_REG_I2O_HIR);
if (Isr & IPS_BIT_I960_MSG1I)
break;
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if (i >= 240) {
/* error occurred */
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"timeout waiting for config.\n");
return (0);
}
Config = readl(ha->mem_ptr + IPS_REG_I960_MSG1);
/* Clear interrupt bit */
Isr = (uint32_t) IPS_BIT_I960_MSG1I;
writel(Isr, ha->mem_ptr + IPS_REG_I2O_HIR);
/* Turn on the interrupts */
Oimr = readl(ha->mem_ptr + IPS_REG_I960_OIMR);
Oimr &= ~0x8;
writel(Oimr, ha->mem_ptr + IPS_REG_I960_OIMR);
/* if we get here then everything went OK */
/* Since we did a RESET, an EraseStripeLock may be needed */
if (Post == 0xEF10) {
if ((Config == 0x000F) || (Config == 0x0009))
ha->requires_esl = 1;
}
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_reset_copperhead */
/* */
/* Routine Description: */
/* */
/* Reset the controller */
/* */
/****************************************************************************/
static int
ips_reset_copperhead(ips_ha_t * ha)
{
int reset_counter;
METHOD_TRACE("ips_reset_copperhead", 1);
DEBUG_VAR(1, "(%s%d) ips_reset_copperhead: io addr: %x, irq: %d",
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
ips_name, ha->host_num, ha->io_addr, ha->pcidev->irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
reset_counter = 0;
while (reset_counter < 2) {
reset_counter++;
outb(IPS_BIT_RST, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
outb(0, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if ((*ha->func.init) (ha))
break;
else if (reset_counter >= 2) {
return (0);
}
}
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_reset_copperhead_memio */
/* */
/* Routine Description: */
/* */
/* Reset the controller */
/* */
/****************************************************************************/
static int
ips_reset_copperhead_memio(ips_ha_t * ha)
{
int reset_counter;
METHOD_TRACE("ips_reset_copperhead_memio", 1);
DEBUG_VAR(1, "(%s%d) ips_reset_copperhead_memio: mem addr: %x, irq: %d",
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
ips_name, ha->host_num, ha->mem_addr, ha->pcidev->irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
reset_counter = 0;
while (reset_counter < 2) {
reset_counter++;
writeb(IPS_BIT_RST, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
writeb(0, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if ((*ha->func.init) (ha))
break;
else if (reset_counter >= 2) {
return (0);
}
}
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_reset_morpheus */
/* */
/* Routine Description: */
/* */
/* Reset the controller */
/* */
/****************************************************************************/
static int
ips_reset_morpheus(ips_ha_t * ha)
{
int reset_counter;
uint8_t junk;
METHOD_TRACE("ips_reset_morpheus", 1);
DEBUG_VAR(1, "(%s%d) ips_reset_morpheus: mem addr: %x, irq: %d",
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
ips_name, ha->host_num, ha->mem_addr, ha->pcidev->irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
reset_counter = 0;
while (reset_counter < 2) {
reset_counter++;
writel(0x80000000, ha->mem_ptr + IPS_REG_I960_IDR);
/* Delay for 5 Seconds */
[SCSI] revert "[SCSI] ips soft lockup during reset/initialization" Revert 15084a4a63bc300c18b28a8a9afac870c552abce - it caused a scheduling-inside-spinlock bug. Cc: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-09 06:56:24 +03:00
MDELAY(5 * IPS_ONE_SEC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* Do a PCI config read to wait for adapter */
pci_read_config_byte(ha->pcidev, 4, &junk);
if ((*ha->func.init) (ha))
break;
else if (reset_counter >= 2) {
return (0);
}
}
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_statinit */
/* */
/* Routine Description: */
/* */
/* Initialize the status queues on the controller */
/* */
/****************************************************************************/
static void
ips_statinit(ips_ha_t * ha)
{
uint32_t phys_status_start;
METHOD_TRACE("ips_statinit", 1);
ha->adapt->p_status_start = ha->adapt->status;
ha->adapt->p_status_end = ha->adapt->status + IPS_MAX_CMDS;
ha->adapt->p_status_tail = ha->adapt->status;
phys_status_start = ha->adapt->hw_status_start;
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(phys_status_start, ha->io_addr + IPS_REG_SQSR);
outl(phys_status_start + IPS_STATUS_Q_SIZE,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->io_addr + IPS_REG_SQER);
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(phys_status_start + IPS_STATUS_SIZE,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->io_addr + IPS_REG_SQHR);
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(phys_status_start, ha->io_addr + IPS_REG_SQTR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->adapt->hw_status_tail = phys_status_start;
}
/****************************************************************************/
/* */
/* Routine Name: ips_statinit_memio */
/* */
/* Routine Description: */
/* */
/* Initialize the status queues on the controller */
/* */
/****************************************************************************/
static void
ips_statinit_memio(ips_ha_t * ha)
{
uint32_t phys_status_start;
METHOD_TRACE("ips_statinit_memio", 1);
ha->adapt->p_status_start = ha->adapt->status;
ha->adapt->p_status_end = ha->adapt->status + IPS_MAX_CMDS;
ha->adapt->p_status_tail = ha->adapt->status;
phys_status_start = ha->adapt->hw_status_start;
writel(phys_status_start, ha->mem_ptr + IPS_REG_SQSR);
writel(phys_status_start + IPS_STATUS_Q_SIZE,
ha->mem_ptr + IPS_REG_SQER);
writel(phys_status_start + IPS_STATUS_SIZE, ha->mem_ptr + IPS_REG_SQHR);
writel(phys_status_start, ha->mem_ptr + IPS_REG_SQTR);
ha->adapt->hw_status_tail = phys_status_start;
}
/****************************************************************************/
/* */
/* Routine Name: ips_statupd_copperhead */
/* */
/* Routine Description: */
/* */
/* Remove an element from the status queue */
/* */
/****************************************************************************/
static uint32_t
ips_statupd_copperhead(ips_ha_t * ha)
{
METHOD_TRACE("ips_statupd_copperhead", 1);
if (ha->adapt->p_status_tail != ha->adapt->p_status_end) {
ha->adapt->p_status_tail++;
ha->adapt->hw_status_tail += sizeof (IPS_STATUS);
} else {
ha->adapt->p_status_tail = ha->adapt->p_status_start;
ha->adapt->hw_status_tail = ha->adapt->hw_status_start;
}
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(ha->adapt->hw_status_tail,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->io_addr + IPS_REG_SQTR);
return (ha->adapt->p_status_tail->value);
}
/****************************************************************************/
/* */
/* Routine Name: ips_statupd_copperhead_memio */
/* */
/* Routine Description: */
/* */
/* Remove an element from the status queue */
/* */
/****************************************************************************/
static uint32_t
ips_statupd_copperhead_memio(ips_ha_t * ha)
{
METHOD_TRACE("ips_statupd_copperhead_memio", 1);
if (ha->adapt->p_status_tail != ha->adapt->p_status_end) {
ha->adapt->p_status_tail++;
ha->adapt->hw_status_tail += sizeof (IPS_STATUS);
} else {
ha->adapt->p_status_tail = ha->adapt->p_status_start;
ha->adapt->hw_status_tail = ha->adapt->hw_status_start;
}
writel(ha->adapt->hw_status_tail, ha->mem_ptr + IPS_REG_SQTR);
return (ha->adapt->p_status_tail->value);
}
/****************************************************************************/
/* */
/* Routine Name: ips_statupd_morpheus */
/* */
/* Routine Description: */
/* */
/* Remove an element from the status queue */
/* */
/****************************************************************************/
static uint32_t
ips_statupd_morpheus(ips_ha_t * ha)
{
uint32_t val;
METHOD_TRACE("ips_statupd_morpheus", 1);
val = readl(ha->mem_ptr + IPS_REG_I2O_OUTMSGQ);
return (val);
}
/****************************************************************************/
/* */
/* Routine Name: ips_issue_copperhead */
/* */
/* Routine Description: */
/* */
/* Send a command down to the controller */
/* */
/****************************************************************************/
static int
ips_issue_copperhead(ips_ha_t * ha, ips_scb_t * scb)
{
uint32_t TimeOut;
uint32_t val;
METHOD_TRACE("ips_issue_copperhead", 1);
if (scb->scsi_cmd) {
DEBUG_VAR(2, "(%s%d) ips_issue: cmd 0x%X id %d (%d %d %d)",
ips_name,
ha->host_num,
scb->cdb[0],
scb->cmd.basic_io.command_id,
scb->bus, scb->target_id, scb->lun);
} else {
DEBUG_VAR(2, KERN_NOTICE "(%s%d) ips_issue: logical cmd id %d",
ips_name, ha->host_num, scb->cmd.basic_io.command_id);
}
TimeOut = 0;
while ((val =
le32_to_cpu(inl(ha->io_addr + IPS_REG_CCCR))) & IPS_BIT_SEM) {
udelay(1000);
if (++TimeOut >= IPS_SEM_TIMEOUT) {
if (!(val & IPS_BIT_START_STOP))
break;
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"ips_issue val [0x%x].\n", val);
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"ips_issue semaphore chk timeout.\n");
return (IPS_FAILURE);
} /* end if */
} /* end while */
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(scb->scb_busaddr, ha->io_addr + IPS_REG_CCSAR);
outw(IPS_BIT_START_CMD, ha->io_addr + IPS_REG_CCCR);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return (IPS_SUCCESS);
}
/****************************************************************************/
/* */
/* Routine Name: ips_issue_copperhead_memio */
/* */
/* Routine Description: */
/* */
/* Send a command down to the controller */
/* */
/****************************************************************************/
static int
ips_issue_copperhead_memio(ips_ha_t * ha, ips_scb_t * scb)
{
uint32_t TimeOut;
uint32_t val;
METHOD_TRACE("ips_issue_copperhead_memio", 1);
if (scb->scsi_cmd) {
DEBUG_VAR(2, "(%s%d) ips_issue: cmd 0x%X id %d (%d %d %d)",
ips_name,
ha->host_num,
scb->cdb[0],
scb->cmd.basic_io.command_id,
scb->bus, scb->target_id, scb->lun);
} else {
DEBUG_VAR(2, "(%s%d) ips_issue: logical cmd id %d",
ips_name, ha->host_num, scb->cmd.basic_io.command_id);
}
TimeOut = 0;
while ((val = readl(ha->mem_ptr + IPS_REG_CCCR)) & IPS_BIT_SEM) {
udelay(1000);
if (++TimeOut >= IPS_SEM_TIMEOUT) {
if (!(val & IPS_BIT_START_STOP))
break;
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"ips_issue val [0x%x].\n", val);
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"ips_issue semaphore chk timeout.\n");
return (IPS_FAILURE);
} /* end if */
} /* end while */
writel(scb->scb_busaddr, ha->mem_ptr + IPS_REG_CCSAR);
writel(IPS_BIT_START_CMD, ha->mem_ptr + IPS_REG_CCCR);
return (IPS_SUCCESS);
}
/****************************************************************************/
/* */
/* Routine Name: ips_issue_i2o */
/* */
/* Routine Description: */
/* */
/* Send a command down to the controller */
/* */
/****************************************************************************/
static int
ips_issue_i2o(ips_ha_t * ha, ips_scb_t * scb)
{
METHOD_TRACE("ips_issue_i2o", 1);
if (scb->scsi_cmd) {
DEBUG_VAR(2, "(%s%d) ips_issue: cmd 0x%X id %d (%d %d %d)",
ips_name,
ha->host_num,
scb->cdb[0],
scb->cmd.basic_io.command_id,
scb->bus, scb->target_id, scb->lun);
} else {
DEBUG_VAR(2, "(%s%d) ips_issue: logical cmd id %d",
ips_name, ha->host_num, scb->cmd.basic_io.command_id);
}
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(scb->scb_busaddr, ha->io_addr + IPS_REG_I2O_INMSGQ);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return (IPS_SUCCESS);
}
/****************************************************************************/
/* */
/* Routine Name: ips_issue_i2o_memio */
/* */
/* Routine Description: */
/* */
/* Send a command down to the controller */
/* */
/****************************************************************************/
static int
ips_issue_i2o_memio(ips_ha_t * ha, ips_scb_t * scb)
{
METHOD_TRACE("ips_issue_i2o_memio", 1);
if (scb->scsi_cmd) {
DEBUG_VAR(2, "(%s%d) ips_issue: cmd 0x%X id %d (%d %d %d)",
ips_name,
ha->host_num,
scb->cdb[0],
scb->cmd.basic_io.command_id,
scb->bus, scb->target_id, scb->lun);
} else {
DEBUG_VAR(2, "(%s%d) ips_issue: logical cmd id %d",
ips_name, ha->host_num, scb->cmd.basic_io.command_id);
}
writel(scb->scb_busaddr, ha->mem_ptr + IPS_REG_I2O_INMSGQ);
return (IPS_SUCCESS);
}
/****************************************************************************/
/* */
/* Routine Name: ips_isintr_copperhead */
/* */
/* Routine Description: */
/* */
/* Test to see if an interrupt is for us */
/* */
/****************************************************************************/
static int
ips_isintr_copperhead(ips_ha_t * ha)
{
uint8_t Isr;
METHOD_TRACE("ips_isintr_copperhead", 2);
Isr = inb(ha->io_addr + IPS_REG_HISR);
if (Isr == 0xFF)
/* ?!?! Nothing really there */
return (0);
if (Isr & IPS_BIT_SCE)
return (1);
else if (Isr & (IPS_BIT_SQO | IPS_BIT_GHI)) {
/* status queue overflow or GHI */
/* just clear the interrupt */
outb(Isr, ha->io_addr + IPS_REG_HISR);
}
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_isintr_copperhead_memio */
/* */
/* Routine Description: */
/* */
/* Test to see if an interrupt is for us */
/* */
/****************************************************************************/
static int
ips_isintr_copperhead_memio(ips_ha_t * ha)
{
uint8_t Isr;
METHOD_TRACE("ips_isintr_memio", 2);
Isr = readb(ha->mem_ptr + IPS_REG_HISR);
if (Isr == 0xFF)
/* ?!?! Nothing really there */
return (0);
if (Isr & IPS_BIT_SCE)
return (1);
else if (Isr & (IPS_BIT_SQO | IPS_BIT_GHI)) {
/* status queue overflow or GHI */
/* just clear the interrupt */
writeb(Isr, ha->mem_ptr + IPS_REG_HISR);
}
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_isintr_morpheus */
/* */
/* Routine Description: */
/* */
/* Test to see if an interrupt is for us */
/* */
/****************************************************************************/
static int
ips_isintr_morpheus(ips_ha_t * ha)
{
uint32_t Isr;
METHOD_TRACE("ips_isintr_morpheus", 2);
Isr = readl(ha->mem_ptr + IPS_REG_I2O_HIR);
if (Isr & IPS_BIT_I2O_OPQI)
return (1);
else
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_wait */
/* */
/* Routine Description: */
/* */
/* Wait for a command to complete */
/* */
/****************************************************************************/
static int
ips_wait(ips_ha_t * ha, int time, int intr)
{
int ret;
int done;
METHOD_TRACE("ips_wait", 1);
ret = IPS_FAILURE;
done = FALSE;
time *= IPS_ONE_SEC; /* convert seconds */
while ((time > 0) && (!done)) {
if (intr == IPS_INTR_ON) {
if (ha->waitflag == FALSE) {
ret = IPS_SUCCESS;
done = TRUE;
break;
}
} else if (intr == IPS_INTR_IORL) {
if (ha->waitflag == FALSE) {
/*
* controller generated an interrupt to
* acknowledge completion of the command
* and ips_intr() has serviced the interrupt.
*/
ret = IPS_SUCCESS;
done = TRUE;
break;
}
/*
* NOTE: we already have the io_request_lock so
* even if we get an interrupt it won't get serviced
* until after we finish.
*/
(*ha->func.intr) (ha);
}
/* This looks like a very evil loop, but it only does this during start-up */
udelay(1000);
time--;
}
return (ret);
}
/****************************************************************************/
/* */
/* Routine Name: ips_write_driver_status */
/* */
/* Routine Description: */
/* */
/* Write OS/Driver version to Page 5 of the nvram on the controller */
/* */
/****************************************************************************/
static int
ips_write_driver_status(ips_ha_t * ha, int intr)
{
METHOD_TRACE("ips_write_driver_status", 1);
if (!ips_readwrite_page5(ha, FALSE, intr)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"unable to read NVRAM page 5.\n");
return (0);
}
/* check to make sure the page has a valid */
/* signature */
if (le32_to_cpu(ha->nvram->signature) != IPS_NVRAM_P5_SIG) {
DEBUG_VAR(1,
"(%s%d) NVRAM page 5 has an invalid signature: %X.",
ips_name, ha->host_num, ha->nvram->signature);
ha->nvram->signature = IPS_NVRAM_P5_SIG;
}
DEBUG_VAR(2,
"(%s%d) Ad Type: %d, Ad Slot: %d, BIOS: %c%c%c%c %c%c%c%c.",
ips_name, ha->host_num, le16_to_cpu(ha->nvram->adapter_type),
ha->nvram->adapter_slot, ha->nvram->bios_high[0],
ha->nvram->bios_high[1], ha->nvram->bios_high[2],
ha->nvram->bios_high[3], ha->nvram->bios_low[0],
ha->nvram->bios_low[1], ha->nvram->bios_low[2],
ha->nvram->bios_low[3]);
ips_get_bios_version(ha, intr);
/* change values (as needed) */
ha->nvram->operating_system = IPS_OS_LINUX;
ha->nvram->adapter_type = ha->ad_type;
scsi: ips: Convert strnlen() to memcpy() since result should not be NUL terminated Fixes the following W=1 kernel build warning(s): In file included from arch/arm/include/asm/io.h:23, from drivers/scsi/ips.c:164: In function ‘strncpy’, inlined from ‘ips_send_cmd’ at drivers/scsi/ips.c:3522:6: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul cop ying 4 bytes from a string of the same length [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ NB: Lots of these - snipping for brevity Link: https://lore.kernel.org/r/20200723122446.1329773-14-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: ipslinux@adaptec.com Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-23 15:24:19 +03:00
memcpy((char *) ha->nvram->driver_high, IPS_VERSION_HIGH, 4);
memcpy((char *) ha->nvram->driver_low, IPS_VERSION_LOW, 4);
memcpy((char *) ha->nvram->bios_high, ha->bios_version, 4);
memcpy((char *) ha->nvram->bios_low, ha->bios_version + 4, 4);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[SCSI] ips: remove "Version Matching" IBM has finally agreed that the "Version Matching" between firmware and drivers ( and the resulting warning messages ) is no longer necessary. This patch will remove those functions from the ServeRAID driver. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-03 17:46:00 +03:00
ha->nvram->versioning = 0; /* Indicate the Driver Does Not Support Versioning */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* now update the page */
if (!ips_readwrite_page5(ha, TRUE, intr)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"unable to write NVRAM page 5.\n");
return (0);
}
/* IF NVRAM Page 5 is OK, Use it for Slot Number Info Because Linux Doesn't Do Slots */
ha->slot_num = ha->nvram->adapter_slot;
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_read_adapter_status */
/* */
/* Routine Description: */
/* */
/* Do an Inquiry command to the adapter */
/* */
/****************************************************************************/
static int
ips_read_adapter_status(ips_ha_t * ha, int intr)
{
ips_scb_t *scb;
int ret;
METHOD_TRACE("ips_read_adapter_status", 1);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_ENQUIRY;
scb->cmd.basic_io.op_code = IPS_CMD_ENQUIRY;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.basic_io.sg_count = 0;
scb->cmd.basic_io.lba = 0;
scb->cmd.basic_io.sector_count = 0;
scb->cmd.basic_io.log_drv = 0;
scb->data_len = sizeof (*ha->enq);
scb->cmd.basic_io.sg_addr = ha->enq_busaddr;
/* send command */
if (((ret =
ips_send_wait(ha, scb, ips_cmd_timeout, intr)) == IPS_FAILURE)
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1))
return (0);
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_read_subsystem_parameters */
/* */
/* Routine Description: */
/* */
/* Read subsystem parameters from the adapter */
/* */
/****************************************************************************/
static int
ips_read_subsystem_parameters(ips_ha_t * ha, int intr)
{
ips_scb_t *scb;
int ret;
METHOD_TRACE("ips_read_subsystem_parameters", 1);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_GET_SUBSYS;
scb->cmd.basic_io.op_code = IPS_CMD_GET_SUBSYS;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.basic_io.sg_count = 0;
scb->cmd.basic_io.lba = 0;
scb->cmd.basic_io.sector_count = 0;
scb->cmd.basic_io.log_drv = 0;
scb->data_len = sizeof (*ha->subsys);
scb->cmd.basic_io.sg_addr = ha->ioctl_busaddr;
/* send command */
if (((ret =
ips_send_wait(ha, scb, ips_cmd_timeout, intr)) == IPS_FAILURE)
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1))
return (0);
memcpy(ha->subsys, ha->ioctl_data, sizeof(*ha->subsys));
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_read_config */
/* */
/* Routine Description: */
/* */
/* Read the configuration on the adapter */
/* */
/****************************************************************************/
static int
ips_read_config(ips_ha_t * ha, int intr)
{
ips_scb_t *scb;
int i;
int ret;
METHOD_TRACE("ips_read_config", 1);
/* set defaults for initiator IDs */
for (i = 0; i < 4; i++)
ha->conf->init_id[i] = 7;
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_READ_CONF;
scb->cmd.basic_io.op_code = IPS_CMD_READ_CONF;
scb->cmd.basic_io.command_id = IPS_COMMAND_ID(ha, scb);
scb->data_len = sizeof (*ha->conf);
scb->cmd.basic_io.sg_addr = ha->ioctl_busaddr;
/* send command */
if (((ret =
ips_send_wait(ha, scb, ips_cmd_timeout, intr)) == IPS_FAILURE)
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1)) {
memset(ha->conf, 0, sizeof (IPS_CONF));
/* reset initiator IDs */
for (i = 0; i < 4; i++)
ha->conf->init_id[i] = 7;
/* Allow Completed with Errors, so JCRM can access the Adapter to fix the problems */
if ((scb->basic_status & IPS_GSC_STATUS_MASK) ==
IPS_CMD_CMPLT_WERROR)
return (1);
return (0);
}
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
memcpy(ha->conf, ha->ioctl_data, sizeof(*ha->conf));
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_readwrite_page5 */
/* */
/* Routine Description: */
/* */
/* Read nvram page 5 from the adapter */
/* */
/****************************************************************************/
static int
ips_readwrite_page5(ips_ha_t * ha, int write, int intr)
{
ips_scb_t *scb;
int ret;
METHOD_TRACE("ips_readwrite_page5", 1);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_RW_NVRAM_PAGE;
scb->cmd.nvram.op_code = IPS_CMD_RW_NVRAM_PAGE;
scb->cmd.nvram.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.nvram.page = 5;
scb->cmd.nvram.write = write;
scb->cmd.nvram.reserved = 0;
scb->cmd.nvram.reserved2 = 0;
scb->data_len = sizeof (*ha->nvram);
scb->cmd.nvram.buffer_addr = ha->ioctl_busaddr;
if (write)
memcpy(ha->ioctl_data, ha->nvram, sizeof(*ha->nvram));
[SCSI] ips: trim trailing whitespace [akpm@linux-foundation.org: coding style fixes] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:08 +03:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* issue the command */
if (((ret =
ips_send_wait(ha, scb, ips_cmd_timeout, intr)) == IPS_FAILURE)
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1)) {
memset(ha->nvram, 0, sizeof (IPS_NVRAM_P5));
return (0);
}
if (!write)
memcpy(ha->nvram, ha->ioctl_data, sizeof(*ha->nvram));
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_clear_adapter */
/* */
/* Routine Description: */
/* */
/* Clear the stripe lock tables */
/* */
/****************************************************************************/
static int
ips_clear_adapter(ips_ha_t * ha, int intr)
{
ips_scb_t *scb;
int ret;
METHOD_TRACE("ips_clear_adapter", 1);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_reset_timeout;
scb->cdb[0] = IPS_CMD_CONFIG_SYNC;
scb->cmd.config_sync.op_code = IPS_CMD_CONFIG_SYNC;
scb->cmd.config_sync.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.config_sync.channel = 0;
scb->cmd.config_sync.source_target = IPS_POCL;
scb->cmd.config_sync.reserved = 0;
scb->cmd.config_sync.reserved2 = 0;
scb->cmd.config_sync.reserved3 = 0;
/* issue command */
if (((ret =
ips_send_wait(ha, scb, ips_reset_timeout, intr)) == IPS_FAILURE)
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1))
return (0);
/* send unlock stripe command */
ips_init_scb(ha, scb);
scb->cdb[0] = IPS_CMD_ERROR_TABLE;
scb->timeout = ips_reset_timeout;
scb->cmd.unlock_stripe.op_code = IPS_CMD_ERROR_TABLE;
scb->cmd.unlock_stripe.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.unlock_stripe.log_drv = 0;
scb->cmd.unlock_stripe.control = IPS_CSL;
scb->cmd.unlock_stripe.reserved = 0;
scb->cmd.unlock_stripe.reserved2 = 0;
scb->cmd.unlock_stripe.reserved3 = 0;
/* issue command */
if (((ret =
ips_send_wait(ha, scb, ips_cmd_timeout, intr)) == IPS_FAILURE)
|| (ret == IPS_SUCCESS_IMM)
|| ((scb->basic_status & IPS_GSC_STATUS_MASK) > 1))
return (0);
return (1);
}
/****************************************************************************/
/* */
/* Routine Name: ips_ffdc_reset */
/* */
/* Routine Description: */
/* */
/* FFDC: write reset info */
/* */
/****************************************************************************/
static void
ips_ffdc_reset(ips_ha_t * ha, int intr)
{
ips_scb_t *scb;
METHOD_TRACE("ips_ffdc_reset", 1);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_FFDC;
scb->cmd.ffdc.op_code = IPS_CMD_FFDC;
scb->cmd.ffdc.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.ffdc.reset_count = ha->reset_count;
scb->cmd.ffdc.reset_type = 0x80;
/* convert time to what the card wants */
ips_fix_ffdc_time(ha, scb, ha->last_ffdc);
/* issue command */
ips_send_wait(ha, scb, ips_cmd_timeout, intr);
}
/****************************************************************************/
/* */
/* Routine Name: ips_ffdc_time */
/* */
/* Routine Description: */
/* */
/* FFDC: write time info */
/* */
/****************************************************************************/
static void
ips_ffdc_time(ips_ha_t * ha)
{
ips_scb_t *scb;
METHOD_TRACE("ips_ffdc_time", 1);
DEBUG_VAR(1, "(%s%d) Sending time update.", ips_name, ha->host_num);
scb = &ha->scbs[ha->max_cmds - 1];
ips_init_scb(ha, scb);
scb->timeout = ips_cmd_timeout;
scb->cdb[0] = IPS_CMD_FFDC;
scb->cmd.ffdc.op_code = IPS_CMD_FFDC;
scb->cmd.ffdc.command_id = IPS_COMMAND_ID(ha, scb);
scb->cmd.ffdc.reset_count = 0;
scb->cmd.ffdc.reset_type = 0;
/* convert time to what the card wants */
ips_fix_ffdc_time(ha, scb, ha->last_ffdc);
/* issue command */
ips_send_wait(ha, scb, ips_cmd_timeout, IPS_FFDC);
}
/****************************************************************************/
/* */
/* Routine Name: ips_fix_ffdc_time */
/* */
/* Routine Description: */
/* Adjust time_t to what the card wants */
/* */
/****************************************************************************/
static void
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
ips_fix_ffdc_time(ips_ha_t * ha, ips_scb_t * scb, time64_t current_time)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
struct tm tm;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
METHOD_TRACE("ips_fix_ffdc_time", 1);
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
time64_to_tm(current_time, 0, &tm);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
scsi: ips: fix firmware timestamps for 32-bit do_gettimeofday() is deprecated since it will stop working in 2038 on 32-bit platforms, leading to incorrect times passed to the firmware. On 64-bit platforms the current code appears to be fine, as the calculation passes an 8-bit century number into the firmware that can represent times long in the future (possibly until 25599). Using ktime_get_real_seconds() to get a 64-bit seconds value and time64_to_tm() to convert it into the firmware format greatly simplifies the ips timekeeping code, makes 32-bit and 64-bit behave the same way here, and gets us closer to removing the deprecated interfaces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-20 19:04:40 +03:00
scb->cmd.ffdc.hour = tm.tm_hour;
scb->cmd.ffdc.minute = tm.tm_min;
scb->cmd.ffdc.second = tm.tm_sec;
scb->cmd.ffdc.yearH = (tm.tm_year + 1900) / 100;
scb->cmd.ffdc.yearL = tm.tm_year % 100;
scb->cmd.ffdc.month = tm.tm_mon + 1;
scb->cmd.ffdc.day = tm.tm_mday;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/****************************************************************************
* BIOS Flash Routines *
****************************************************************************/
/****************************************************************************/
/* */
/* Routine Name: ips_erase_bios */
/* */
/* Routine Description: */
/* Erase the BIOS on the adapter */
/* */
/****************************************************************************/
static int
ips_erase_bios(ips_ha_t * ha)
{
int timeout;
uint8_t status = 0;
METHOD_TRACE("ips_erase_bios", 1);
status = 0;
/* Clear the status register */
outl(0, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
outb(0x50, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* Erase Setup */
outb(0x20, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* Erase Confirm */
outb(0xD0, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* Erase Status */
outb(0x70, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
timeout = 80000; /* 80 seconds */
while (timeout > 0) {
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
outl(0, ha->io_addr + IPS_REG_FLAP);
udelay(25); /* 25 us */
}
status = inb(ha->io_addr + IPS_REG_FLDP);
if (status & 0x80)
break;
MDELAY(1);
timeout--;
}
/* check for timeout */
if (timeout <= 0) {
/* timeout */
/* try to suspend the erase */
outb(0xB0, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* wait for 10 seconds */
timeout = 10000;
while (timeout > 0) {
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
outl(0, ha->io_addr + IPS_REG_FLAP);
udelay(25); /* 25 us */
}
status = inb(ha->io_addr + IPS_REG_FLDP);
if (status & 0xC0)
break;
MDELAY(1);
timeout--;
}
return (1);
}
/* check for valid VPP */
if (status & 0x08)
/* VPP failure */
return (1);
spelling fixes acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 20:35:02 +04:00
/* check for successful flash */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (status & 0x30)
/* sequence error */
return (1);
/* Otherwise, we were successful */
/* clear status */
outb(0x50, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* enable reads */
outb(0xFF, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_erase_bios_memio */
/* */
/* Routine Description: */
/* Erase the BIOS on the adapter */
/* */
/****************************************************************************/
static int
ips_erase_bios_memio(ips_ha_t * ha)
{
int timeout;
uint8_t status;
METHOD_TRACE("ips_erase_bios_memio", 1);
status = 0;
/* Clear the status register */
writel(0, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
writeb(0x50, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* Erase Setup */
writeb(0x20, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* Erase Confirm */
writeb(0xD0, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* Erase Status */
writeb(0x70, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
timeout = 80000; /* 80 seconds */
while (timeout > 0) {
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
writel(0, ha->mem_ptr + IPS_REG_FLAP);
udelay(25); /* 25 us */
}
status = readb(ha->mem_ptr + IPS_REG_FLDP);
if (status & 0x80)
break;
MDELAY(1);
timeout--;
}
/* check for timeout */
if (timeout <= 0) {
/* timeout */
/* try to suspend the erase */
writeb(0xB0, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* wait for 10 seconds */
timeout = 10000;
while (timeout > 0) {
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
writel(0, ha->mem_ptr + IPS_REG_FLAP);
udelay(25); /* 25 us */
}
status = readb(ha->mem_ptr + IPS_REG_FLDP);
if (status & 0xC0)
break;
MDELAY(1);
timeout--;
}
return (1);
}
/* check for valid VPP */
if (status & 0x08)
/* VPP failure */
return (1);
spelling fixes acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 20:35:02 +04:00
/* check for successful flash */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (status & 0x30)
/* sequence error */
return (1);
/* Otherwise, we were successful */
/* clear status */
writeb(0x50, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* enable reads */
writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_program_bios */
/* */
/* Routine Description: */
/* Program the BIOS on the adapter */
/* */
/****************************************************************************/
static int
ips_program_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize,
uint32_t offset)
{
int i;
int timeout;
uint8_t status = 0;
METHOD_TRACE("ips_program_bios", 1);
status = 0;
for (i = 0; i < buffersize; i++) {
/* write a byte */
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(i + offset, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
outb(0x40, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
outb(buffer[i], ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* wait up to one second */
timeout = 1000;
while (timeout > 0) {
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
outl(0, ha->io_addr + IPS_REG_FLAP);
udelay(25); /* 25 us */
}
status = inb(ha->io_addr + IPS_REG_FLDP);
if (status & 0x80)
break;
MDELAY(1);
timeout--;
}
if (timeout == 0) {
/* timeout error */
outl(0, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
outb(0xFF, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (1);
}
/* check the status */
if (status & 0x18) {
/* programming error */
outl(0, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
outb(0xFF, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (1);
}
} /* end for */
/* Enable reading */
outl(0, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
outb(0xFF, ha->io_addr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_program_bios_memio */
/* */
/* Routine Description: */
/* Program the BIOS on the adapter */
/* */
/****************************************************************************/
static int
ips_program_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize,
uint32_t offset)
{
int i;
int timeout;
uint8_t status = 0;
METHOD_TRACE("ips_program_bios_memio", 1);
status = 0;
for (i = 0; i < buffersize; i++) {
/* write a byte */
writel(i + offset, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
writeb(0x40, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
writeb(buffer[i], ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
/* wait up to one second */
timeout = 1000;
while (timeout > 0) {
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
writel(0, ha->mem_ptr + IPS_REG_FLAP);
udelay(25); /* 25 us */
}
status = readb(ha->mem_ptr + IPS_REG_FLDP);
if (status & 0x80)
break;
MDELAY(1);
timeout--;
}
if (timeout == 0) {
/* timeout error */
writel(0, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (1);
}
/* check the status */
if (status & 0x18) {
/* programming error */
writel(0, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (1);
}
} /* end for */
/* Enable reading */
writel(0, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
writeb(0xFF, ha->mem_ptr + IPS_REG_FLDP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_verify_bios */
/* */
/* Routine Description: */
/* Verify the BIOS on the adapter */
/* */
/****************************************************************************/
static int
ips_verify_bios(ips_ha_t * ha, char *buffer, uint32_t buffersize,
uint32_t offset)
{
uint8_t checksum;
int i;
METHOD_TRACE("ips_verify_bios", 1);
/* test 1st byte */
outl(0, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (inb(ha->io_addr + IPS_REG_FLDP) != 0x55)
return (1);
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(1, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (inb(ha->io_addr + IPS_REG_FLDP) != 0xAA)
return (1);
checksum = 0xff;
for (i = 2; i < buffersize; i++) {
[SCSI] ips: remove spurious cpu_to_leX on outX statements These are completely wrong because both outX and writeX do an automatic reverse of their arguments if necessary, so having an extra cpu_to_leX gives us the wrong ordering on BE platforms again. Acked-by: Mark Salyzyn <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-03 21:28:20 +04:00
outl(i + offset, ha->io_addr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
checksum = (uint8_t) checksum + inb(ha->io_addr + IPS_REG_FLDP);
}
if (checksum != 0)
/* failure */
return (1);
else
/* success */
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_verify_bios_memio */
/* */
/* Routine Description: */
/* Verify the BIOS on the adapter */
/* */
/****************************************************************************/
static int
ips_verify_bios_memio(ips_ha_t * ha, char *buffer, uint32_t buffersize,
uint32_t offset)
{
uint8_t checksum;
int i;
METHOD_TRACE("ips_verify_bios_memio", 1);
/* test 1st byte */
writel(0, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0x55)
return (1);
writel(1, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
if (readb(ha->mem_ptr + IPS_REG_FLDP) != 0xAA)
return (1);
checksum = 0xff;
for (i = 2; i < buffersize; i++) {
writel(i + offset, ha->mem_ptr + IPS_REG_FLAP);
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (ha->pcidev->revision == IPS_REVID_TROMBONE64)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
udelay(25); /* 25 us */
checksum =
(uint8_t) checksum + readb(ha->mem_ptr + IPS_REG_FLDP);
}
if (checksum != 0)
/* failure */
return (1);
else
/* success */
return (0);
}
/****************************************************************************/
/* */
/* Routine Name: ips_abort_init */
/* */
/* Routine Description: */
/* cleanup routine for a failed adapter initialization */
/****************************************************************************/
static int
ips_abort_init(ips_ha_t * ha, int index)
{
ha->active = 0;
ips_free(ha);
ips_ha[index] = NULL;
ips_sh[index] = NULL;
return -1;
}
/****************************************************************************/
/* */
/* Routine Name: ips_shift_controllers */
/* */
/* Routine Description: */
/* helper function for ordering adapters */
/****************************************************************************/
static void
ips_shift_controllers(int lowindex, int highindex)
{
ips_ha_t *ha_sav = ips_ha[highindex];
struct Scsi_Host *sh_sav = ips_sh[highindex];
int i;
for (i = highindex; i > lowindex; i--) {
ips_ha[i] = ips_ha[i - 1];
ips_sh[i] = ips_sh[i - 1];
ips_ha[i]->host_num = i;
}
ha_sav->host_num = lowindex;
ips_ha[lowindex] = ha_sav;
ips_sh[lowindex] = sh_sav;
}
/****************************************************************************/
/* */
/* Routine Name: ips_order_controllers */
/* */
/* Routine Description: */
/* place controllers is the "proper" boot order */
/****************************************************************************/
static void
ips_order_controllers(void)
{
int i, j, tmp, position = 0;
IPS_NVRAM_P5 *nvram;
if (!ips_ha[0])
return;
nvram = ips_ha[0]->nvram;
if (nvram->adapter_order[0]) {
for (i = 1; i <= nvram->adapter_order[0]; i++) {
for (j = position; j < ips_num_controllers; j++) {
switch (ips_ha[j]->ad_type) {
case IPS_ADTYPE_SERVERAID6M:
case IPS_ADTYPE_SERVERAID7M:
if (nvram->adapter_order[i] == 'M') {
ips_shift_controllers(position,
j);
position++;
}
break;
case IPS_ADTYPE_SERVERAID4L:
case IPS_ADTYPE_SERVERAID4M:
case IPS_ADTYPE_SERVERAID4MX:
case IPS_ADTYPE_SERVERAID4LX:
if (nvram->adapter_order[i] == 'N') {
ips_shift_controllers(position,
j);
position++;
}
break;
case IPS_ADTYPE_SERVERAID6I:
case IPS_ADTYPE_SERVERAID5I2:
case IPS_ADTYPE_SERVERAID5I1:
case IPS_ADTYPE_SERVERAID7k:
if (nvram->adapter_order[i] == 'S') {
ips_shift_controllers(position,
j);
position++;
}
break;
case IPS_ADTYPE_SERVERAID:
case IPS_ADTYPE_SERVERAID2:
case IPS_ADTYPE_NAVAJO:
case IPS_ADTYPE_KIOWA:
case IPS_ADTYPE_SERVERAID3L:
case IPS_ADTYPE_SERVERAID3:
case IPS_ADTYPE_SERVERAID4H:
if (nvram->adapter_order[i] == 'A') {
ips_shift_controllers(position,
j);
position++;
}
break;
default:
break;
}
}
}
/* if adapter_order[0], then ordering is complete */
return;
}
/* old bios, use older ordering */
tmp = 0;
for (i = position; i < ips_num_controllers; i++) {
if (ips_ha[i]->ad_type == IPS_ADTYPE_SERVERAID5I2 ||
ips_ha[i]->ad_type == IPS_ADTYPE_SERVERAID5I1) {
ips_shift_controllers(position, i);
position++;
tmp = 1;
}
}
/* if there were no 5I cards, then don't do any extra ordering */
if (!tmp)
return;
for (i = position; i < ips_num_controllers; i++) {
if (ips_ha[i]->ad_type == IPS_ADTYPE_SERVERAID4L ||
ips_ha[i]->ad_type == IPS_ADTYPE_SERVERAID4M ||
ips_ha[i]->ad_type == IPS_ADTYPE_SERVERAID4LX ||
ips_ha[i]->ad_type == IPS_ADTYPE_SERVERAID4MX) {
ips_shift_controllers(position, i);
position++;
}
}
return;
}
/****************************************************************************/
/* */
/* Routine Name: ips_register_scsi */
/* */
/* Routine Description: */
/* perform any registration and setup with the scsi layer */
/****************************************************************************/
static int
ips_register_scsi(int index)
{
struct Scsi_Host *sh;
ips_ha_t *ha, *oldha = ips_ha[index];
sh = scsi_host_alloc(&ips_driver_template, sizeof (ips_ha_t));
if (!sh) {
IPS_PRINTK(KERN_WARNING, oldha->pcidev,
"Unable to register controller with SCSI subsystem\n");
return -1;
}
ha = IPS_HA(sh);
memcpy(ha, oldha, sizeof (ips_ha_t));
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
free_irq(oldha->pcidev->irq, oldha);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/* Install the interrupt handler with the new ha */
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (request_irq(ha->pcidev->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to install interrupt handler\n");
[SCSI] ips: handle scsi_add_host() failure, and other err cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:10 +03:00
goto err_out_sh;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
kfree(oldha);
/* Store away needed values for later use */
sh->unique_id = (ha->io_addr) ? ha->io_addr : ha->mem_addr;
sh->sg_tablesize = sh->hostt->sg_tablesize;
sh->can_queue = sh->hostt->can_queue;
sh->cmd_per_lun = sh->hostt->cmd_per_lun;
sh->max_sectors = 128;
sh->max_id = ha->ntargets;
sh->max_lun = ha->nlun;
sh->max_channel = ha->nbus - 1;
sh->can_queue = ha->max_cmds - 1;
[SCSI] ips: handle scsi_add_host() failure, and other err cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:10 +03:00
if (scsi_add_host(sh, &ha->pcidev->dev))
goto err_out;
ips_sh[index] = sh;
ips_ha[index] = ha;
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
scsi_scan_host(sh);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return 0;
[SCSI] ips: handle scsi_add_host() failure, and other err cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:10 +03:00
err_out:
free_irq(ha->pcidev->irq, ha);
err_out_sh:
scsi_host_put(sh);
return -1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/*---------------------------------------------------------------------------*/
/* Routine Name: ips_remove_device */
/* */
/* Routine Description: */
/* Remove one Adapter ( Hot Plugging ) */
/*---------------------------------------------------------------------------*/
Drivers: scsi: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 01:08:55 +04:00
static void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_remove_device(struct pci_dev *pci_dev)
{
[SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:09 +03:00
struct Scsi_Host *sh = pci_get_drvdata(pci_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:09 +03:00
pci_set_drvdata(pci_dev, NULL);
ips_release(sh);
pci_release_regions(pci_dev);
pci_disable_device(pci_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
/****************************************************************************/
/* */
/* Routine Name: ips_module_init */
/* */
/* Routine Description: */
/* function called on module load */
/****************************************************************************/
static int __init
ips_module_init(void)
{
ips: remove pointless #warning non-x86 builds want the #warning in the IPS code about compiling on the wrong architecture removed because it keeps triggering on their platforms build farms. Transform from a compile time warning into a runtime one with taint to preserve the original intent of the authors. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-19 21:38:17 +03:00
#if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__)
printk(KERN_ERR "ips: This driver has only been tested on the x86/ia64/x86_64 platforms\n");
add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK);
#endif
[SCSI] Switch ips to pci_register from pci_module Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-26 02:45:51 +04:00
if (pci_register_driver(&ips_pci_driver) < 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return -ENODEV;
ips_driver_template.module = THIS_MODULE;
ips_order_controllers();
[SCSI] ips: remove kernel 2.4 code Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 01:41:46 +04:00
if (!ips_detect(&ips_driver_template)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
pci_unregister_driver(&ips_pci_driver);
return -ENODEV;
}
register_reboot_notifier(&ips_notifier);
return 0;
}
/****************************************************************************/
/* */
/* Routine Name: ips_module_exit */
/* */
/* Routine Description: */
/* function called on module unload */
/****************************************************************************/
static void __exit
ips_module_exit(void)
{
pci_unregister_driver(&ips_pci_driver);
unregister_reboot_notifier(&ips_notifier);
}
module_init(ips_module_init);
module_exit(ips_module_exit);
/*---------------------------------------------------------------------------*/
/* Routine Name: ips_insert_device */
/* */
/* Routine Description: */
/* Add One Adapter ( Hot Plug ) */
/* */
/* Return Value: */
/* 0 if Successful, else non-zero */
/*---------------------------------------------------------------------------*/
Drivers: scsi: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 01:08:55 +04:00
static int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ips_insert_device(struct pci_dev *pci_dev, const struct pci_device_id *ent)
{
[SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:09 +03:00
int index = -1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
int rc;
METHOD_TRACE("ips_insert_device", 1);
[SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:09 +03:00
rc = pci_enable_device(pci_dev);
if (rc)
return rc;
rc = pci_request_regions(pci_dev, "ips");
if (rc)
goto err_out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
rc = ips_init_phase1(pci_dev, &index);
if (rc == SUCCESS)
rc = ips_init_phase2(index);
if (ips_hotplug)
if (ips_register_scsi(index)) {
ips_free(ips_ha[index]);
rc = -1;
}
if (rc == SUCCESS)
ips_num_controllers++;
ips_next_controller = ips_num_controllers;
[SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:09 +03:00
if (rc < 0) {
rc = -ENODEV;
goto err_out_regions;
}
pci_set_drvdata(pci_dev, ips_sh[index]);
return 0;
err_out_regions:
pci_release_regions(pci_dev);
err_out:
pci_disable_device(pci_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return rc;
}
/*---------------------------------------------------------------------------*/
/* Routine Name: ips_init_phase1 */
/* */
/* Routine Description: */
/* Adapter Initialization */
/* */
/* Return Value: */
/* 0 if Successful, else non-zero */
/*---------------------------------------------------------------------------*/
static int
ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
{
ips_ha_t *ha;
uint32_t io_addr;
uint32_t mem_addr;
uint32_t io_len;
uint32_t mem_len;
int j;
int index;
dma_addr_t dma_address;
char __iomem *ioremap_ptr;
char __iomem *mem_ptr;
uint32_t IsDead;
METHOD_TRACE("ips_init_phase1", 1);
index = IPS_MAX_ADAPTERS;
for (j = 0; j < IPS_MAX_ADAPTERS; j++) {
[SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:09 +03:00
if (ips_ha[j] == NULL) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
index = j;
break;
}
}
if (index >= IPS_MAX_ADAPTERS)
return -1;
/* Init MEM/IO addresses to 0 */
mem_addr = 0;
io_addr = 0;
mem_len = 0;
io_len = 0;
for (j = 0; j < 2; j++) {
if (!pci_resource_start(pci_dev, j))
break;
if (pci_resource_flags(pci_dev, j) & IORESOURCE_IO) {
io_addr = pci_resource_start(pci_dev, j);
io_len = pci_resource_len(pci_dev, j);
} else {
mem_addr = pci_resource_start(pci_dev, j);
mem_len = pci_resource_len(pci_dev, j);
}
}
/* setup memory mapped area (if applicable) */
if (mem_addr) {
uint32_t base;
uint32_t offs;
base = mem_addr & PAGE_MASK;
offs = mem_addr - base;
ioremap_ptr = ioremap(base, PAGE_SIZE);
[SCSI] ips: PCI API cleanups * pass Scsi_Host to ips_remove_device() via pci_set_drvdata(), allowing us to eliminate the ips_ha[] search loop and call ips_release() directly. * call pci_{request,release}_regions() and eliminate individual request/release_[mem_]region() calls * call pci_disable_device(), paired with pci_enable_device() * s/0/NULL/ in a few places * check ioremap() return value Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:09 +03:00
if (!ioremap_ptr)
return -1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
mem_ptr = ioremap_ptr + offs;
} else {
ioremap_ptr = NULL;
mem_ptr = NULL;
}
/* found a controller */
some kmalloc/memset ->kzalloc (tree wide) Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 12:49:03 +04:00
ha = kzalloc(sizeof (ips_ha_t), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (ha == NULL) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate temporary ha struct\n");
return -1;
}
ips_sh[index] = NULL;
ips_ha[index] = ha;
ha->active = 1;
/* Store info in HA structure */
ha->io_addr = io_addr;
ha->io_len = io_len;
ha->mem_addr = mem_addr;
ha->mem_len = mem_len;
ha->mem_ptr = mem_ptr;
ha->ioremap_ptr = ioremap_ptr;
ha->host_num = (uint32_t) index;
ha->slot_num = PCI_SLOT(pci_dev->devfn);
ha->pcidev = pci_dev;
/*
* Set the pci_dev's dma_mask. Not all adapters support 64bit
* addressing so don't enable it if the adapter can't support
* it! Also, don't use 64bit addressing if dma addresses
* are guaranteed to be < 4G.
*/
scsi: ips: properly handle 64-bit DMA CONFIG_HIGHMEM64 is only one (and these days unusual) way to indicate that > 32-bit dma address are possible. Replace it with a check of the dma_addr_t size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-18 16:03:34 +03:00
if (sizeof(dma_addr_t) > 4 && IPS_HAS_ENH_SGLIST(ha) &&
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
!dma_set_mask(&ha->pcidev->dev, DMA_BIT_MASK(64))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
(ha)->flags |= IPS_HA_ENH_SG;
} else {
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
if (dma_set_mask(&ha->pcidev->dev, DMA_BIT_MASK(32)) != 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
printk(KERN_WARNING "Unable to set DMA Mask\n");
return ips_abort_init(ha, index);
}
}
if(ips_cd_boot && !ips_FlashData){
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ips_FlashData = dma_alloc_coherent(&pci_dev->dev,
PAGE_SIZE << 7, &ips_flashbusaddr, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ha->enq = dma_alloc_coherent(&pci_dev->dev, sizeof (IPS_ENQ),
&ha->enq_busaddr, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (!ha->enq) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate host inquiry structure\n");
return ips_abort_init(ha, index);
}
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ha->adapt = dma_alloc_coherent(&pci_dev->dev,
sizeof (IPS_ADAPTER) + sizeof (IPS_IO_CMD),
&dma_address, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (!ha->adapt) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate host adapt & dummy structures\n");
return ips_abort_init(ha, index);
}
ha->adapt->hw_status_start = dma_address;
ha->dummy = (void *) (ha->adapt + 1);
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ha->logical_drive_info = dma_alloc_coherent(&pci_dev->dev,
sizeof (IPS_LD_INFO), &dma_address, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (!ha->logical_drive_info) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate logical drive info structure\n");
return ips_abort_init(ha, index);
}
ha->logical_drive_info_dma_addr = dma_address;
ha->conf = kmalloc(sizeof (IPS_CONF), GFP_KERNEL);
if (!ha->conf) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate host conf structure\n");
return ips_abort_init(ha, index);
}
ha->nvram = kmalloc(sizeof (IPS_NVRAM_P5), GFP_KERNEL);
if (!ha->nvram) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate host NVRAM structure\n");
return ips_abort_init(ha, index);
}
ha->subsys = kmalloc(sizeof (IPS_SUBSYS), GFP_KERNEL);
if (!ha->subsys) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate host subsystem structure\n");
return ips_abort_init(ha, index);
}
/* the ioctl buffer is now used during adapter initialization, so its
* successful allocation is now required */
if (ips_ioctlsize < PAGE_SIZE)
ips_ioctlsize = PAGE_SIZE;
scsi: ips: switch to generic DMA API Switch from the legacy PCI DMA API to the generic DMA API. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-11 11:15:35 +03:00
ha->ioctl_data = dma_alloc_coherent(&pci_dev->dev, ips_ioctlsize,
&ha->ioctl_busaddr, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
ha->ioctl_len = ips_ioctlsize;
if (!ha->ioctl_data) {
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to allocate IOCTL data\n");
return ips_abort_init(ha, index);
}
/*
* Setup Functions
*/
ips_setup_funclist(ha);
if ((IPS_IS_MORPHEUS(ha)) || (IPS_IS_MARCO(ha))) {
/* If Morpheus appears dead, reset it */
IsDead = readl(ha->mem_ptr + IPS_REG_I960_MSG1);
if (IsDead == 0xDEADBEEF) {
ips_reset_morpheus(ha);
}
}
/*
* Initialize the card if it isn't already
*/
if (!(*ha->func.isinit) (ha)) {
if (!(*ha->func.init) (ha)) {
/*
* Initialization failed
*/
IPS_PRINTK(KERN_WARNING, pci_dev,
"Unable to initialize controller\n");
return ips_abort_init(ha, index);
}
}
*indexPtr = index;
return SUCCESS;
}
/*---------------------------------------------------------------------------*/
/* Routine Name: ips_init_phase2 */
/* */
/* Routine Description: */
/* Adapter Initialization Phase 2 */
/* */
/* Return Value: */
/* 0 if Successful, else non-zero */
/*---------------------------------------------------------------------------*/
static int
ips_init_phase2(int index)
{
ips_ha_t *ha;
ha = ips_ha[index];
METHOD_TRACE("ips_init_phase2", 1);
if (!ha->active) {
ips_ha[index] = NULL;
return -1;
}
/* Install the interrupt handler */
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
if (request_irq(ha->pcidev->irq, do_ipsintr, IRQF_SHARED, ips_name, ha)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to install interrupt handler\n");
return ips_abort_init(ha, index);
}
/*
* Allocate a temporary SCB for initialization
*/
ha->max_cmds = 1;
if (!ips_allocatescbs(ha)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to allocate a CCB\n");
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
free_irq(ha->pcidev->irq, ha);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return ips_abort_init(ha, index);
}
if (!ips_hainit(ha)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to initialize controller\n");
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
free_irq(ha->pcidev->irq, ha);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return ips_abort_init(ha, index);
}
/* Free the temporary SCB */
ips_deallocatescbs(ha, 1);
/* allocate CCBs */
if (!ips_allocatescbs(ha)) {
IPS_PRINTK(KERN_WARNING, ha->pcidev,
"Unable to allocate CCBs\n");
[SCSI] ips: remove ips_ha members that duplicate struct pci_dev members Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-14 03:14:07 +03:00
free_irq(ha->pcidev->irq, ha);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return ips_abort_init(ha, index);
}
return SUCCESS;
}
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("IBM ServeRAID Adapter Driver " IPS_VER_STRING);
MODULE_VERSION(IPS_VER_STRING);