WSL2-Linux-Kernel/arch/powerpc/include/asm/reg.h

795 строки
35 KiB
C
Исходник Обычный вид История

/*
* Contains the definition of registers common to all PowerPC variants.
* If a register definition has been changed in a different PowerPC
* variant, we will case it in #ifndef XXX ... #endif, and have the
* number used in the Programming Environments Manual For 32-Bit
* Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
*/
#ifndef _ASM_POWERPC_REG_H
#define _ASM_POWERPC_REG_H
#ifdef __KERNEL__
#include <linux/stringify.h>
#include <asm/cputable.h>
/* Pickup Book E specific registers. */
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
#include <asm/reg_booke.h>
[PATCH] powerpc: Merge cacheflush.h and cache.h The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:50:16 +03:00
#endif /* CONFIG_BOOKE || CONFIG_40x */
#ifdef CONFIG_FSL_EMB_PERFMON
#include <asm/reg_fsl_emb.h>
#endif
[PATCH] powerpc: Merge cacheflush.h and cache.h The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 03:50:16 +03:00
#ifdef CONFIG_8xx
#include <asm/reg_8xx.h>
#endif /* CONFIG_8xx */
#define MSR_SF_LG 63 /* Enable 64 bit mode */
#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */
#define MSR_HV_LG 60 /* Hypervisor state */
#define MSR_VEC_LG 25 /* Enable AltiVec */
#define MSR_VSX_LG 23 /* Enable VSX */
#define MSR_POW_LG 18 /* Enable Power Management */
#define MSR_WE_LG 18 /* Wait State Enable */
#define MSR_TGPR_LG 17 /* TLB Update registers in use */
#define MSR_CE_LG 17 /* Critical Interrupt Enable */
#define MSR_ILE_LG 16 /* Interrupt Little Endian */
#define MSR_EE_LG 15 /* External Interrupt Enable */
#define MSR_PR_LG 14 /* Problem State / Privilege Level */
#define MSR_FP_LG 13 /* Floating Point enable */
#define MSR_ME_LG 12 /* Machine Check Enable */
#define MSR_FE0_LG 11 /* Floating Exception mode 0 */
#define MSR_SE_LG 10 /* Single Step */
#define MSR_BE_LG 9 /* Branch Trace */
#define MSR_DE_LG 9 /* Debug Exception Enable */
#define MSR_FE1_LG 8 /* Floating Exception mode 1 */
#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */
#define MSR_IR_LG 5 /* Instruction Relocate */
#define MSR_DR_LG 4 /* Data Relocate */
#define MSR_PE_LG 3 /* Protection Enable */
#define MSR_PX_LG 2 /* Protection Exclusive Mode */
#define MSR_PMM_LG 2 /* Performance monitor */
#define MSR_RI_LG 1 /* Recoverable Exception */
#define MSR_LE_LG 0 /* Little Endian */
#ifdef __ASSEMBLY__
#define __MASK(X) (1<<(X))
#else
#define __MASK(X) (1UL<<(X))
#endif
#ifdef CONFIG_PPC64
#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */
#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */
#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */
#else
/* so tests for these bits fail on 32-bit */
#define MSR_SF 0
#define MSR_ISF 0
#define MSR_HV 0
#endif
#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */
#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */
#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */
#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */
#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */
#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */
#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */
#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */
#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */
#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */
#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */
#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */
#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */
#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */
#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */
#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */
#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */
#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */
#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */
#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */
#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */
#ifndef MSR_PMM
#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */
#endif
#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */
#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */
#ifdef CONFIG_PPC64
#define MSR_ MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
#define MSR_KERNEL MSR_ | MSR_SF
#define MSR_USER32 MSR_ | MSR_PR | MSR_EE
#define MSR_USER64 MSR_USER32 | MSR_SF
#else /* 32-bit */
/* Default MSR for kernel mode. */
#ifndef MSR_KERNEL /* reg_booke.h also defines this */
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
#endif
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#endif
/* Floating Point Status and Control Register (FPSCR) Fields */
#define FPSCR_FX 0x80000000 /* FPU exception summary */
#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
#define FPSCR_VX 0x20000000 /* Invalid operation summary */
#define FPSCR_OX 0x10000000 /* Overflow exception summary */
#define FPSCR_UX 0x08000000 /* Underflow exception summary */
#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */
#define FPSCR_XX 0x02000000 /* Inexact exception summary */
#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
#define FPSCR_FR 0x00040000 /* Fraction rounded */
#define FPSCR_FI 0x00020000 /* Fraction inexact */
#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
#define FPSCR_RN 0x00000003 /* FPU rounding control */
/* Special Purpose Registers (SPRNs)*/
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DSCR 0x11
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
#define CTRL_CT 0xc0000000 /* current thread */
#define CTRL_CT0 0x80000000 /* thread 0 */
#define CTRL_CT1 0x40000000 /* thread 1 */
#define CTRL_TE 0x00c00000 /* thread enable */
#define CTRL_RUNLATCH 0x1
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define DABR_TRANSLATION (1UL << 2)
#define DABR_DATA_WRITE (1UL << 1)
#define DABR_DATA_READ (1UL << 0)
#define SPRN_DABR2 0x13D /* e300 */
#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */
#define DABRX_USER (1UL << 0)
#define DABRX_KERNEL (1UL << 1)
#define SPRN_DAR 0x013 /* Data Address Register */
#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define DSISR_ISSTORE 0x02000000 /* access was a store */
#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */
#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
#define SPRN_SPURR 0x134 /* Scaled PURR */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
#define SPRN_LPCR 0x13E /* LPAR Control Register */
#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */
#define SPRN_DEC 0x016 /* Decrement Register */
#define SPRN_DER 0x095 /* Debug Enable Regsiter */
#define DER_RSTE 0x40000000 /* Reset Interrupt */
#define DER_CHSTPE 0x20000000 /* Check Stop */
#define DER_MCIE 0x10000000 /* Machine Check Interrupt */
#define DER_EXTIE 0x02000000 /* External Interrupt */
#define DER_ALIE 0x01000000 /* Alignment Interrupt */
#define DER_PRIE 0x00800000 /* Program Interrupt */
#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */
#define DER_DECIE 0x00200000 /* Decrementer Interrupt */
#define DER_SYSIE 0x00040000 /* System Call Interrupt */
#define DER_TRE 0x00020000 /* Trace Interrupt */
#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */
#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */
#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */
#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */
#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */
#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */
#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */
#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
#define SPRN_EAR 0x11A /* External Address Register */
#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
#define HID0_SBCLK (1<<27)
#define HID0_EICE (1<<26)
#define HID0_TBEN (1<<26) /* Timebase enable - 745x */
#define HID0_ECLK (1<<25)
#define HID0_PAR (1<<24)
#define HID0_STEN (1<<24) /* Software table search enable - 745x */
#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */
#define HID0_DOZE (1<<23)
#define HID0_NAP (1<<22)
#define HID0_SLEEP (1<<21)
#define HID0_DPM (1<<20)
#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */
#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */
#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/
#define HID0_ICE (1<<15) /* Instruction Cache Enable */
#define HID0_DCE (1<<14) /* Data Cache Enable */
#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
#define HID0_DLOCK (1<<12) /* Data Cache Lock */
#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
#define HID0_DCI (1<<10) /* Data Cache Invalidate */
#define HID0_SPD (1<<9) /* Speculative disable */
#define HID0_DAPUEN (1<<8) /* Debug APU enable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */
#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */
#define HID0_BHTE (1<<2) /* Branch History Table Enable */
#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */
#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */
#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */
#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
#define HID1_PS (1<<16) /* 750FX PLL selection */
#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
#define SPRN_IABR2 0x3FA /* 83xx */
#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */
#define SPRN_HID4 0x3F4 /* 970 HID4 */
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_HID6 0x3F9 /* BE HID 6 */
#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */
#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */
#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */
#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */
#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */
#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */
#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */
#define SPRN_TSC 0x3FD /* Thread switch control on others */
#define SPRN_TST 0x3FC /* Thread switch timeout on others */
#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
#endif
#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */
#define ICTRL_EICE 0x08000000 /* enable icache parity errs */
#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */
#define ICTRL_EICP 0x00000100 /* enable icache par. check */
#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_L2CR2 0x3f8
#define L2CR_L2E 0x80000000 /* L2 enable */
#define L2CR_L2PE 0x40000000 /* L2 parity enable */
#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */
#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */
#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */
#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */
#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */
#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */
#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */
#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */
#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */
#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */
#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */
#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */
#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */
#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */
#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */
#define L2CR_L2DO 0x00400000 /* L2 data only */
#define L2CR_L2I 0x00200000 /* L2 global invalidate */
#define L2CR_L2CTL 0x00100000 /* L2 RAM control */
#define L2CR_L2WT 0x00080000 /* L2 write-through */
#define L2CR_L2TS 0x00040000 /* L2 test support */
#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */
#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */
#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */
#define L2CR_L2SL 0x00008000 /* L2 DLL slow */
#define L2CR_L2DF 0x00004000 /* L2 differential clock */
#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */
#define L2CR_L2IP 0x00000001 /* L2 GI in progress */
#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */
#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */
#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */
#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */
#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */
#define L3CR_L3E 0x80000000 /* L3 enable */
#define L3CR_L3PE 0x40000000 /* L3 data parity enable */
#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */
#define L3CR_L3SIZ 0x10000000 /* L3 size */
#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */
#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */
#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */
#define L3CR_L3IO 0x00400000 /* L3 instruction only */
#define L3CR_L3SPO 0x00040000 /* L3 sample point override */
#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */
#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */
#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */
#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */
#define L3CR_L3I 0x00000400 /* L3 global invalidate */
#define L3CR_L3RT 0x00000300 /* L3 SRAM type */
#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */
#define L3CR_L3DO 0x00000040 /* L3 data only mode */
#define L3CR_PMEN 0x00000004 /* L3 private memory enable */
#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */
#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */
#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */
#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */
#define SPRN_LDSTDB 0x3f4 /* */
#define SPRN_LR 0x008 /* Link Register */
#ifndef SPRN_PIR
#define SPRN_PIR 0x3FF /* Processor Identification Register */
#endif
#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */
#define SPRN_PVR 0x11F /* Processor Version Register */
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
#define SPRN_ASR 0x118 /* Address Space Register */
#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
#define SRR1_WAKERESET 0x00380000 /* System reset */
#define SRR1_WAKESYSERR 0x00300000 /* System error */
#define SRR1_WAKEEE 0x00200000 /* External interrupt */
#define SRR1_WAKEMT 0x00280000 /* mtctrl */
#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */
#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */
#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */
#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */
#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */
#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */
#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */
#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */
#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */
#ifndef SPRN_SVR
#define SPRN_SVR 0x11E /* System Version Register */
#endif
#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
/* these bits were defined in inverted endian sense originally, ugh, confusing */
#define THRM1_TIN (1 << 31)
#define THRM1_TIV (1 << 30)
#define THRM1_THRES(x) ((x&0x7f)<<23)
#define THRM3_SITV(x) ((x&0x3fff)<<1)
#define THRM1_TID (1<<2)
#define THRM1_TIE (1<<1)
#define THRM1_V (1<<0)
#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
#define THRM3_E (1<<0)
#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
#define SPRN_SCOMC 0x114 /* SCOM Access Control */
#define SPRN_SCOMD 0x115 /* SCOM Access DATA */
/* Performance monitor SPRs */
#ifdef CONFIG_PPC64
#define SPRN_MMCR0 795
#define MMCR0_FC 0x80000000UL /* freeze counters */
#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */
#define MMCR0_KERNEL_DISABLE MMCR0_FCS
#define MMCR0_FCP 0x20000000UL /* freeze in problem state */
#define MMCR0_PROBLEM_DISABLE MMCR0_FCP
#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */
#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */
#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */
#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */
#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
#define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/
#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
#define MMCR0_PMAO 0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */
#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */
#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */
#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */
#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */
#define SPRN_MMCR1 798
#define SPRN_MMCRA 0x312
#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */
#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */
#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */
#define MMCRA_SLOT_SHIFT 24
#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
#define POWER6_MMCRA_SIHV 0x0000040000000000ULL
#define POWER6_MMCRA_SIPR 0x0000020000000000ULL
#define POWER6_MMCRA_THRM 0x00000020UL
#define POWER6_MMCRA_OTHER 0x0000000EUL
#define SPRN_PMC1 787
#define SPRN_PMC2 788
#define SPRN_PMC3 789
#define SPRN_PMC4 790
#define SPRN_PMC5 791
#define SPRN_PMC6 792
#define SPRN_PMC7 793
#define SPRN_PMC8 794
#define SPRN_SIAR 780
#define SPRN_SDAR 781
#define SPRN_PA6T_MMCR0 795
#define PA6T_MMCR0_EN0 0x0000000000000001UL
#define PA6T_MMCR0_EN1 0x0000000000000002UL
#define PA6T_MMCR0_EN2 0x0000000000000004UL
#define PA6T_MMCR0_EN3 0x0000000000000008UL
#define PA6T_MMCR0_EN4 0x0000000000000010UL
#define PA6T_MMCR0_EN5 0x0000000000000020UL
#define PA6T_MMCR0_SUPEN 0x0000000000000040UL
#define PA6T_MMCR0_PREN 0x0000000000000080UL
#define PA6T_MMCR0_HYPEN 0x0000000000000100UL
#define PA6T_MMCR0_FCM0 0x0000000000000200UL
#define PA6T_MMCR0_FCM1 0x0000000000000400UL
#define PA6T_MMCR0_INTGEN 0x0000000000000800UL
#define PA6T_MMCR0_INTEN0 0x0000000000001000UL
#define PA6T_MMCR0_INTEN1 0x0000000000002000UL
#define PA6T_MMCR0_INTEN2 0x0000000000004000UL
#define PA6T_MMCR0_INTEN3 0x0000000000008000UL
#define PA6T_MMCR0_INTEN4 0x0000000000010000UL
#define PA6T_MMCR0_INTEN5 0x0000000000020000UL
#define PA6T_MMCR0_DISCNT 0x0000000000040000UL
#define PA6T_MMCR0_UOP 0x0000000000080000UL
#define PA6T_MMCR0_TRG 0x0000000000100000UL
#define PA6T_MMCR0_TRGEN 0x0000000000200000UL
#define PA6T_MMCR0_TRGREG 0x0000000001600000UL
#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL
#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL
#define PA6T_MMCR0_PROEN 0x0000000008000000UL
#define PA6T_MMCR0_PROLOG 0x0000000010000000UL
#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL
#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL
#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL
#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL
#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL
#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL
#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL
#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL
#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL
#define PA6T_MMCR0_PCTEN 0x0000004000000000UL
#define PA6T_MMCR0_SOCEN 0x0000008000000000UL
#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL
#define SPRN_PA6T_MMCR1 798
#define PA6T_MMCR1_ES2 0x00000000000000ffUL
#define PA6T_MMCR1_ES3 0x000000000000ff00UL
#define PA6T_MMCR1_ES4 0x0000000000ff0000UL
#define PA6T_MMCR1_ES5 0x00000000ff000000UL
#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */
#define SPRN_PA6T_UPMC1 772 /* ... */
#define SPRN_PA6T_UPMC2 773
#define SPRN_PA6T_UPMC3 774
#define SPRN_PA6T_UPMC4 775
#define SPRN_PA6T_UPMC5 776
#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */
#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */
#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */
#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */
#define SPRN_PA6T_PMC0 787
#define SPRN_PA6T_PMC1 788
#define SPRN_PA6T_PMC2 789
#define SPRN_PA6T_PMC3 790
#define SPRN_PA6T_PMC4 791
#define SPRN_PA6T_PMC5 792
#define SPRN_PA6T_TSR0 793 /* Timestamp Register 0 */
#define SPRN_PA6T_TSR1 794 /* Timestamp Register 1 */
#define SPRN_PA6T_TSR2 799 /* Timestamp Register 2 */
#define SPRN_PA6T_TSR3 784 /* Timestamp Register 3 */
#define SPRN_PA6T_IER 981 /* Icache Error Register */
#define SPRN_PA6T_DER 982 /* Dcache Error Register */
#define SPRN_PA6T_BER 862 /* BIU Error Address Register */
#define SPRN_PA6T_MER 849 /* MMU Error Register */
#define SPRN_PA6T_IMA0 880 /* Instruction Match Array 0 */
#define SPRN_PA6T_IMA1 881 /* ... */
#define SPRN_PA6T_IMA2 882
#define SPRN_PA6T_IMA3 883
#define SPRN_PA6T_IMA4 884
#define SPRN_PA6T_IMA5 885
#define SPRN_PA6T_IMA6 886
#define SPRN_PA6T_IMA7 887
#define SPRN_PA6T_IMA8 888
#define SPRN_PA6T_IMA9 889
#define SPRN_PA6T_BTCR 978 /* Breakpoint and Tagging Control Register */
#define SPRN_PA6T_IMAAT 979 /* Instruction Match Array Action Table */
#define SPRN_PA6T_PCCR 1019 /* Power Counter Control Register */
#define SPRN_BKMK 1020 /* Cell Bookmark Register */
#define SPRN_PA6T_RPCCR 1021 /* Retire PC Trace Control Register */
#else /* 32-bit */
#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */
#define MMCR0_FC 0x80000000UL /* freeze counters */
#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */
#define MMCR0_FCP 0x20000000UL /* freeze in problem state */
#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */
#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */
#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */
#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */
#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/
#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */
#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */
#define SPRN_MMCR1 956
#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */
#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */
#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */
#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
#define SPRN_MMCR2 944
#define SPRN_PMC1 953 /* Performance Counter Register 1 */
#define SPRN_PMC2 954 /* Performance Counter Register 2 */
#define SPRN_PMC3 957 /* Performance Counter Register 3 */
#define SPRN_PMC4 958 /* Performance Counter Register 4 */
#define SPRN_PMC5 945 /* Performance Counter Register 5 */
#define SPRN_PMC6 946 /* Performance Counter Register 6 */
#define SPRN_SIAR 955 /* Sampled Instruction Address Register */
/* Bit definitions for MMCR0 and PMC1 / PMC2. */
#define MMCR0_PMC1_CYCLES (1 << 7)
#define MMCR0_PMC1_ICACHEMISS (5 << 7)
#define MMCR0_PMC1_DTLB (6 << 7)
#define MMCR0_PMC2_DCACHEMISS 0x6
#define MMCR0_PMC2_CYCLES 0x1
#define MMCR0_PMC2_ITLB 0x7
#define MMCR0_PMC2_LOADMISSTIME 0x5
#endif
/*
* An mtfsf instruction with the L bit set. On CPUs that support this a
* full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
*
* Until binutils gets the new form of mtfsf, hardwire the instruction.
*/
#ifdef CONFIG_PPC64
#define MTFSF_L(REG) \
.long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25))
#else
#define MTFSF_L(REG) mtfsf 0xff, (REG)
#endif
/* Processor Version Register (PVR) field extraction */
#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
#define __is_processor(pv) (PVR_VER(mfspr(SPRN_PVR)) == (pv))
/*
* IBM has further subdivided the standard PowerPC 16-bit version and
* revision subfields of the PVR for the PowerPC 403s into the following:
*/
#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
/* Processor Version Numbers */
#define PVR_403GA 0x00200000
#define PVR_403GB 0x00200100
#define PVR_403GC 0x00200200
#define PVR_403GCX 0x00201400
#define PVR_405GP 0x40110000
#define PVR_STB03XXX 0x40310000
#define PVR_NP405H 0x41410000
#define PVR_NP405L 0x41610000
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
#define PVR_603e 0x00060000
#define PVR_603ev 0x00070000
#define PVR_603r 0x00071000
#define PVR_604 0x00040000
#define PVR_604e 0x00090000
#define PVR_604r 0x000A0000
#define PVR_620 0x00140000
#define PVR_740 0x00080000
#define PVR_750 PVR_740
#define PVR_740P 0x10080000
#define PVR_750P PVR_740P
#define PVR_7400 0x000C0000
#define PVR_7410 0x800C0000
#define PVR_7450 0x80000000
#define PVR_8540 0x80200000
#define PVR_8560 0x80200000
/*
* For the 8xx processors, all of them report the same PVR family for
* the PowerPC core. The various versions of these processors must be
* differentiated by the version number in the Communication Processor
* Module (CPM).
*/
#define PVR_821 0x00500000
#define PVR_823 PVR_821
#define PVR_850 PVR_821
#define PVR_860 PVR_821
#define PVR_8240 0x00810100
#define PVR_8245 0x80811014
#define PVR_8260 PVR_8240
/* 64-bit processors */
/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
#define PV_NORTHSTAR 0x0033
#define PV_PULSAR 0x0034
#define PV_POWER4 0x0035
#define PV_ICESTAR 0x0036
#define PV_SSTAR 0x0037
#define PV_POWER4p 0x0038
#define PV_970 0x0039
#define PV_POWER5 0x003A
#define PV_POWER5p 0x003B
#define PV_970FX 0x003C
#define PV_630 0x0040
#define PV_630p 0x0041
#define PV_970MP 0x0044
#define PV_970GX 0x0045
#define PV_BE 0x0070
#define PV_PA6T 0x0090
/* Macros for setting and retrieving special purpose registers */
#ifndef __ASSEMBLY__
#define mfmsr() ({unsigned long rval; \
asm volatile("mfmsr %0" : "=r" (rval)); rval;})
#ifdef CONFIG_PPC64
#define __mtmsrd(v, l) asm volatile("mtmsrd %0," __stringify(l) \
: : "r" (v))
#define mtmsrd(v) __mtmsrd((v), 0)
#define mtmsr(v) mtmsrd(v)
#else
#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v))
#endif
#define mfspr(rn) ({unsigned long rval; \
asm volatile("mfspr %0," __stringify(rn) \
: "=r" (rval)); rval;})
#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
#ifdef __powerpc64__
#ifdef CONFIG_PPC_CELL
#define mftb() ({unsigned long rval; \
asm volatile( \
"90: mftb %0;\n" \
"97: cmpwi %0,0;\n" \
" beq- 90b;\n" \
"99:\n" \
".section __ftr_fixup,\"a\"\n" \
".align 3\n" \
"98:\n" \
" .llong %1\n" \
" .llong %1\n" \
" .llong 97b-98b\n" \
" .llong 99b-98b\n" \
powerpc: Introduce infrastructure for feature sections with alternatives The current feature section logic only supports nop'ing out code, this means if you want to choose at runtime between instruction sequences, one or both cases will have to execute the nop'ed out contents of the other section, eg: BEGIN_FTR_SECTION or 1,1,1 END_FTR_SECTION_IFSET(FOO) BEGIN_FTR_SECTION or 2,2,2 END_FTR_SECTION_IFCLR(FOO) and the resulting code will be either, or 1,1,1 nop or, nop or 2,2,2 For small code segments this is fine, but for larger code blocks and in performance criticial code segments, it would be nice to avoid the nops. This commit starts to implement logic to allow the following: BEGIN_FTR_SECTION or 1,1,1 FTR_SECTION_ELSE or 2,2,2 ALT_FTR_SECTION_END_IFSET(FOO) and the resulting code will be: or 1,1,1 or, or 2,2,2 We achieve this by extending the existing FTR macros. The current feature section semantic just becomes a special case, ie. if the else case is empty we nop out the default case. The key limitation is that the size of the else case must be less than or equal to the size of the default case. If the else case is smaller the remainder of the section is nop'ed. We let the linker put the else case code in with the rest of the text, so that relative branches from the else case are more likley to link, this has the disadvantage that we can't free the unused else cases. This commit introduces the required macro and linker script changes, but does not enable the patching of the alternative sections. We also need to update two hand-made section entries in reg.h and timex.h Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-24 05:32:54 +04:00
" .llong 0\n" \
" .llong 0\n" \
".previous" \
: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
#else
#define mftb() ({unsigned long rval; \
asm volatile("mftb %0" : "=r" (rval)); rval;})
#endif /* !CONFIG_PPC_CELL */
#else /* __powerpc64__ */
#define mftbl() ({unsigned long rval; \
asm volatile("mftbl %0" : "=r" (rval)); rval;})
#define mftbu() ({unsigned long rval; \
asm volatile("mftbu %0" : "=r" (rval)); rval;})
#endif /* !__powerpc64__ */
#define mttbl(v) asm volatile("mttbl %0":: "r"(v))
#define mttbu(v) asm volatile("mttbu %0":: "r"(v))
#ifdef CONFIG_PPC32
#define mfsrin(v) ({unsigned int rval; \
asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
rval;})
#endif
#define proc_trap() asm volatile("trap")
#ifdef CONFIG_PPC64
extern void ppc64_runlatch_on(void);
extern void ppc64_runlatch_off(void);
extern unsigned long scom970_read(unsigned int address);
extern void scom970_write(unsigned int address, unsigned long value);
#else
#define ppc64_runlatch_on()
#define ppc64_runlatch_off()
#endif /* CONFIG_PPC64 */
#define __get_SP() ({unsigned long sp; \
asm volatile("mr %0,1": "=r" (sp)); sp;})
struct pt_regs;
extern void ppc_save_regs(struct pt_regs *regs);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_REG_H */