The .name field has been not being used in existent code logic, so
it's better that we remove them all.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
So far, EINT on each SoC all used exactly identical register map and thus
it's better that we apply generic register map already supported in EINT
library and stop copy-n-pasting the same data block and filling into its
platform data.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add EINT support to MT7622 SoC and the support is made as just an option
to MT7622 pinctrl.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch is in preparation for adding EINT support to MT7622 pinctrl,
and the refactoring doesn't alter any existent logic.
A reason we have to refactor EINT code pieces into a generic way is that
currently, they're tightly coupled with a certain type of MediaTek pinctrl
would cause a grown in a very bad way as there is different types of
pinctrl devices getting to join.
Therefore, it is an essential or urgent thing that EINT code pieces are
refactored to eliminate any dependencies across GPIO and EINT as possible.
Additional structure mtk_eint_[xt, hw, regs] are being introduced for
indicating how maps being designed between GPIO and EINT hw number, how to
set and get GPIO state for a certain EINT pin, what characteristic on a
EINT device is present on various SoCs.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Extend the capability of MT7622 pinctrl with adding EINT so that each
GPIO can be used to notify CPU when a signal state is changing on the
line as an external interrupt.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1. Driver expects specific order of GPIO interrupt banks. For S5Pv220
and Exynos5410 this order was not preserved so fix and document it.
2. Remove support for Exynos5440 (tree-wide, support is dropped because
there are no real users of this platform, it also did not get testing
since long time).
3. Fix lost state of GPF1..5 pins on Exynos5433 during system suspend.
-----BEGIN PGP SIGNATURE-----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=7nCe
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-4.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v4.18
1. Driver expects specific order of GPIO interrupt banks. For S5Pv220
and Exynos5410 this order was not preserved so fix and document it.
2. Remove support for Exynos5440 (tree-wide, support is dropped because
there are no real users of this platform, it also did not get testing
since long time).
3. Fix lost state of GPF1..5 pins on Exynos5433 during system suspend.
- Add support for the new R-Car E3 SoC,
- Add I2C pin groups on R-Car M3-N,
- Small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xeSy
-----END PGP SIGNATURE-----
Merge tag 'sh-pfc-for-v4.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: sh-pfc: Updates for v4.18 (take two)
- Add support for the new R-Car E3 SoC,
- Add I2C pin groups on R-Car M3-N,
- Small fixes and cleanups.
GPF1..5 banks in Exynos5433 are located in two pinctrl devices: ALIVE and
IMEM. Although they are partially located in ALIVE section, the state of
their registers in IMEM section is lost after suspend/resume cycle. To
properly handle such case, those banks have to be defined with standard
'exynos5433_bank_type_off' type (with PINCFG_TYPE_CON_PDN and
PINCFG_TYPE_PUD_PDN register offsets). This automatically instructs
the generic Samsung pinctrl suspend/resume code to save and restore state
of those registers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The comment block explaining the rationale for static pins contains
grammar errors. It appeared first in the pin control driver for R-Car
H3 ES1.x, and spread to R-Car M3-W, H3 ES2.0, and M3-N later.
Fix the grammar in all copies at once.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
This patch adds group and function of AVB PHY, LINK, MAGIC, MII and PTP
pins for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds I2C{1,2,4,5,6,7} pins, groups and functions to
the R8A77990 SoC.
NOTE: I2C0 and I2C3 are not pin multiplexed.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch implements control of pull-up and pull-down. On this SoC there
is no simple mapping of GP pins to bias register bits, so we need a table.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This patch adds initial pinctrl driver to support for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This follows the style of existion PORT_GP_X macros and
will be used by a follow-up patch for the r8a77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use the appropriate SPDX license identifier in the berlin pinctrl
driver source file and drop the previous license text.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Could only support PIN_CONFIG_INPUT_DEBOUNCE now as the HW block
is too simple to support others. But even wrt. debounce capability,
it now could only support very limited period of time to satisfy the
real usecase. But still be useful to enable the crippled HW debounce
to prevent any spurious glitches from waking up the system if the
gpio is conguired as wakeup interrupt source.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are 4 banks (GPIO0 ~ GPIO3), bank0 is in PD_PMU
subsystem, bank1/bank2/bank3 are in PD_BUS subsystem.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Armada 98dx3236 SoCs don't have a different MPP sel value for nand
specific pins so "dev" was technically correct. But all the other Armada
SoCs use "nand" in their dts and the pin is specific to the nand
interface so use "nand" for the function name.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a pair of context save/restore functions to save/restore the
state of a set of pinctrl registers. The context is lost during rtc only
suspend with ddr in self-refresh on am43xx. Currently the save/restore
is being done unconditionally. This will be optimized later with a
pdata-quirk function which will allow is to save/restore only when doing
the rtc only mode with ddr in self refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The data pin 0-7 of the NAND controller are actually missing from
the nand pinctrl group, so we fix it here.
Fixes: 0f15f500ff ("pinctrl: meson: Add GXL pinctrl definitions")
Reported-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The data pin 0-7 of the NAND controller are actually missing from
the nand pinctrl group, so we fix it here.
Fixes: cd1e3b01c7 ("pinctrl: amlogic: gxbb: add nand pins")
Reported-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I was debugging some gpio issues and I thought that the output of gpio
debugfs was telling me the high or low level of the gpios with a '1' or
a '0'. We saw a line like this though:
gpio93 : in 4 2mA pull down
and I started to think that there may be a gas leak in the building
because '4' doesn't mean high or low, and other pins said '0' or '1'. It
turns out, '4' is the function selection for the pinmux of the gpio and
not the value on the pin. Reading code helps decipher what debugfs is
actually saying.
Add support to read the input or output pin depending on how the pin is
configured so we can easily see the high or low value of the pin in
debugfs. Now the output looks like
gpio93 : in low func4 2mA pull down
which clearly shows that the pin is an input, low, with function 4 and a
2mA drive strength plus a pull down.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The "dev" function is selected with the value 0x4 not 0x01.
Fixes: commit d7ae8f8dee ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
DebugFS strings about pin pull status for no_keeper SoC are wrong
Fix this by adding a different string array for no_keeper SoC
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Muxing of pins MCLK1/2 determine the muxing of the corresponding clocks.
Make pinctrl driver to provide clock muxes for the CDEV1/2 pingroups, so
that main clk-controller driver could get an actual parent clock for the
CDEV1/2 clocks.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Allwinner H6 SoC has a R_PIO pin controller like other Allwinner SoCs,
which controls the PL and PM pin banks.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The new helper returns index of the matching string in an array.
We are going to use it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Properties to set initial value of pin output buffer.
This can be useful for configure hardware in overlay files, and in early
boot for checking it states in QA sanity tests.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
To keep driver up to date we add generic pinctrl binding support, which
covers the features used in this driver and has additional node properties
that this SoC has compatibility, so enabling future implementations of
these properties without the need to create new node properties in the
device trees.
The logic of this change maintain the old brcm legacy binding support in
order to keep the ABI stable.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add PFC support for the R8A77470 SoC including pin groups for
some on-chip devices such as SCIF and MMC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds pins, groups and functions for parallel RGB output
signals from DU. The HDMI and TCON pins are added to separate groups.
Based on a similar patch of the R8A7796 PFC driver by Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se>.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Kieran: Rebase on top of tree]
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I've included the pin I/O voltage control into the R8A77970 PFC driver but
it was incomplete because:
- SH_PFC_PIN_CFG_IO_VOLTAGE pin flags weren't set properly;
- sh_pfc_soc_info::ioctrl_regs wasn't set at all...
Fixes: b92ac66a18 ("pinctrl: sh-pfc: Add R8A77970 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add the pin I/O voltage level control support to the R8A77980 PFC driver.
Loosely based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
For a constant format without additional arguments, use seq_puts()
instead of seq_printf(). Also, it fixes the following checkpatch
warning.
WARNING: Prefer seq_puts to seq_printf
+ seq_printf(s, "N/A");
WARNING: Prefer seq_puts to seq_printf
+ seq_printf(s, "\n");
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current code comments of PIN_FUNC_ID actually is not true for
SHARE_MUX_CONF_REG case which should be a 4 u32 PIN_FUNC_ID.
Fix the comments and re-org it a bit for better extendibility
as we may add a different size for SCU based PIN_FUNC_ID later.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Sean Wang
Fabio Estevam
Linus Walleij
Marek Szyprowski
Geert Uytterhoeven
Niklas Söderlund
Takeshi Kihara
Jisheng Zhang
Shawn Lin
David Wu
Chris Packham
Manivannan Sadhasivam
Keerthy
Yixun Lan
Stephen Boyd
Clément Péron
Dmitry Osipenko
Icenowy Zheng
Andy Shevchenko
Matheus Castello
Biju Das
Kieran Bingham
Thomas Gleixner
Sergei Shtylyov
Krzysztof Kozlowski
Dong Aisheng