Completely unused by now. Separate patch in case I've missed a
place somewhere which dereferences the helper vtable but actually
shouldn't do so.
v2: Resolve rebase conflict with Egbert Eich's hpd infrastructure
rework.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Used by SDVO (and hopefully, eventually HDMI, if we ever get around
to fixing up the low dotclock CEA modes ...).
This required adding a new encoder->mode_set callback to be able to
pass around the intel_crtc_config.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only used by the lvds encoder. Note that we shouldn't do the same
simple conversion with the FORCE_6BPC flag, since that's much better
handled by moving all the pipe_bpc computation around.
This requires that we pass the pipe config around to encoders, so
that they can set special attributes and set constraints. To do so
introduce a new ->compute_config encoder callback, which is called in
stead of the drm crtc helper's ->mode_fixup.
To avoid massive churn all over the codebase we don't want to convert
all existing ->mode_fixup functions. Instead I've opted to convert
them on an as-needed basis (mostly to cut down on rebase conflicts and
to have more freedom to experiment around while developing the
patches).
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To make decent modeset state checking possible (e.g. for the check
mode with atomic modesetting) we want to have the full pipe
configuration and state checks done before we touch the hw.
To ensure that all the little bits&pieces that are now moved to the
pipe_config handle this correctly, move its computation to the right
spot now, before we touch the hw in the disable_pipes step.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently only containing the requested and the adjusted mode. And
only crtc callbacks are converted somewhat to it, encoders will be
done on a as-needed basis (simply too much churn in one patch
otherwise).
Future patches will add tons more useful stuff to this struct,
starting with the very simple.
v2: Store the pipe_config in the intel_crtc, so that the ->mode-set,
->enable and also ->disable have easy access to it.
v3: Store the pipe config in the right crtc ...
v4: Rebased.
v5: Fixup an OOPS when trying to kfree an ERR_PTR.
v6: Used drm_moode_copy and some other small cleanups as suggested
by Ville Syrjälä.
v7: drm_mode_copy preserves the mode id of the destination, so no need
to clear it again (Ville).
v8: Break a long line spotted by Paulo.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The backlight device .get_brightness callback is supposed to return the
actual brightness by querying the hardware, not the cached value. See
Documentation/ABI/stable/sysfs-class-backlight. The callback is there to
support the actual_brightness sysfs file.
With the backlight_level and backlight device brightness now in sync, one
can reliably get the cached value through the brightness sysfs file.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A single point of truth would be better than two, but achieving that would
require more abstractions for CONFIG_BACKLIGHT_CLASS_DEVICE=n with not a
whole lot of real benefits. Take the short route and just keep the
backlight levels in sync. In particular, update backlight device brightness
on opregion brightness changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now with Egbert Eich's hpd infrastructure rework merged this is dead
simple. And we need this to make output detection work on SDVO - with
the cleaned-up drm polling helpers outputs which claim to have hpd
support are no longer polled.
Now SDVO claims to do that, but it's not actually wired up. So just do
it.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When disabling a sprite, wait for the sprite to stop fetching data
from memory before unpinning the fb.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Noticed while reviewing the hotplug irq setup code. Just looks better.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since for_each_sg_page supports already memory w/o backing pages we can
revert the corresponding workaround.
This reverts commit 5bd4687e57.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The i915 driver uses sg lists for memory without backing 'struct page'
pages, similarly to other IO memory regions, setting only the DMA
address for these. It does this, so that it can program the HW MMU
tables in a uniform way both for sg lists with and without backing pages.
Without a valid page pointer we can't call nth_page to get the current
page in __sg_page_iter_next, so add a helper that relevant users can
call separately. Also add a helper to get the DMA address of the current
page (idea from Daniel).
Convert all places in i915, to use the new API.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From the w/a database:
'To prevent false VT-d type 6 error:
The primary display plane must be 256KiB aligned, and require an extra
128 PTEs of padding afterward;
The sprites planes must be 128KiB aligned, and require an extra 64 PTEs
of padding afterward;
The cursors must be 64KiB aligned, and require an extra 2 PTEs of
padding afterward.'
As we use the same function to pin the primary and sprite planes, we can
simply use the more strict requirements for scanouts for both.
Instead of using explicit padding PTEs following the scanout objects, we
should be able to use the scratch page that is always mapped into the
unused PTEs to avoid the VT-d error.
References: https://bugs.freedesktop.org/show_bug.cgi?id=59626
References: https://bugs.freedesktop.org/show_bug.cgi?id=59627
References: https://bugs.freedesktop.org/show_bug.cgi?id=59631
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Apply s/vtd_wa/vtd_scanout_wa/ bikeshed since Damien likes
it, too.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now since we have replaced the bits to show interest in hotplug IRQs
we can go and nuke the 'hotplug_supported_mask'.
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After
"Convert HPD interrupts to make use of HPD pin assignment in encoders."
This function is now basically the same as i915_hpd_irq_setup().
Consolidating both functions in one requires one more check for
I915_HAS_HOTPLUG(dev) in the i965 code path and one more check for
IS_G4X(dev) in the i915 code path. These are considered harmless.
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Fixup patch conflict and make it compile.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fixes a regression introduced in
commit e5868a318d
Author: Egbert Eich <eich@suse.de>
Date: Thu Feb 28 04:17:12 2013 -0500
DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode
Due to the irq setup rework in 3.9, see
commit 20afbda209
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 11 14:05:07 2012 +0100
drm/i915: Fixup hpd irq register setup ordering
Egbert Eich's hpd rework blows up on pch-split platforms - it walks
the encoder list before that has been set up completely. The new init
sequence is:
1. irq enabling
2. modeset init
3. hpd setup
We need to move around the ibx setup a bit to fix this.
Ville Syrjälä pointed out in his review that we can't touch SDEIER
after the interrupt handler is set up, since that'll race with Paulo
Zanoni's PCH interrupt race fix:
commit 44498aea29
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Fri Feb 22 17:05:28 2013 -0300
drm/i915: also disable south interrupts when handling them
We fix that by unconditionally enabling all interrupts in SDEIER, but
masking them as-needed in SDEIMR. Since only the single-threaded
setup/teardown (or suspend/resume) code touches that, no further
locking is required.
While at it also simplify the mask handling - we start out with all
interrupts cleared in the postinstall hook, and never enable a hpd
interrupt before hpd_irq_setup is called.
And finally, for consistency rename the ibx hpd setup function to
ibx_hpd_irq_setup.
v2: Fix race around SDEIER writes (Ville).
v3: Remove the superflous posting read for SDEIER, spotted by Ville.
Ville also wondered whether we shouldn't clear SDEIIR, since now
SDE interrupts are enabled before we have an irq handler installed.
But the master interrupt control bit in DEIER is still cleared, so we
should be fine.
Cc: Egbert Eich <eich@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This allows to enable HPD interrupts for individual pins to only receive
hotplug events from lines which are connected and working.
v2: Restructured initailization of const arrays following a suggstion
by Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To clean up hotplug support we add a new enum to intel_encoder:
enum hpd_pin. It allows the encoder to request a hpd line but leave
the details which IRQ is responsible on which chipset generation
to i915_irq.c.
This way requesting hotplug support will become really simple on
the encoder/connector level.
Signed-off-by: Egbert Eich <eich@suse.de>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will poke userspace into probing for configuration changes that may
have occurred across suspend/resume.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the other bits in place, we can do this safely.
v2: disable backlight on suspend to prevent premature enablement on resume
v3: disable CRTCs on suspend to allow RTD3 (Kristen)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Needed for VT switchless resume.
v2: cursor state is now handled correctly in crtc_enable (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To be used to restore sprite state on resume.
v2: move sprite tracking bits up so we don't track modified sprite state
v3: use src_x/y in sprite suspend/resume code (Ville)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rather than building a config which may or may not work, let the driver
build an initial fb config. This allows the driver to use the BIOS boot
configuration for example, displaying kernel messages and the initial fb
console on the same outputs the BIOS lit up at boot time. If that
fails, the driver can still fall back the same way as the core.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Wrap a preallocated region of stolen memory within an ordinary GEM
object, for example the BIOS framebuffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is a minute window for a race between put-fence removing the fence
and for a new transaction by an external party on the GTT mmap. That is
we must zap the mmap prior to removing the fence and not afterwards.
Fixes regression from
commit 61050808bb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 17 15:31:31 2012 +0100
drm/i915: Refactor put_fence() to use the common fence writing routine
v2: Remember the fence to remove with a local variable (gcc)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to HSW PM programming guide, frequency bits starts at
24 instead of 25.
v2: Paulo Zanoni noticed that only frequency bits can be set at
GEN6_RPNSWREQ. All others are read only.
CC: Ben Widawsky <ben@bwidawsk.net>
CC: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If TRANS_DDI_FUNC_CTL has been wrongly programmed with an incorrect
port, we are currently trying to read PORT_CLK_SEL(port) with an
uninitialized value.
Handle that case by returning PORT_CLK_SEL_NONE and warning about it.
v2: Move the warning inside intel_ddi_get_crtc_pll (Paulo Zanoni)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
HSW doesn't overclock the same way as IVB or SNB. I do not know about
VLV, so I've kept that off as well. I'm still working on getting the doc
updates to explain how we overclock on Haswell.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add missing () spotted by Wu Fengguang's kernel build robot.
Acked by Ben.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So don't read it when capturing the error state. This solves
"unclaimed register" messages on Haswell when we have a GPU hang.
V2: Check for HAS_PCH_SPLIT instead of Gen5+ because VLV still has
this register.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So don't read it when capturing the error state. This solves some
"unclaimed register" messages on Haswell when we hang the GPU.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The first version of commit "drm/i915: there's no DSPADDR register on
Haswell" added 2 "!IS_HASWELL" checks. When reviewing the patch, Ben
suggested to make these checks more future-proof, so when Daniel
applied the patch he fixed the first check but not the second. This
commit makes the second check also "future-proof".
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The port number should always be correctly set. Do the same thing as the
switch above and use BUG() to signal that branch is not supposed to be
taken.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We are really talking about the transcoder function here and the disable
version uses trancoder in its name already, so let's try to be
consistent.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the case where the hardware has been wrongly programmed and the EDP
TRANS_DDI_FUNC_CTL register has a bogus value in its EDP Input field, we
were using the pipe variable uninitialized.
In this case, shutdown the transcoder. It will be programmed correctly
the next time we try to enabled eDP.
Note from Paulo's review: Wrong modeset sequence can easily lead to
frozen machines hence the disable_ddi call might be risky. But since
things are awry already, doesn't matter too much.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Add note about Paulo's caution about potential hangs.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Our static analysis tool noticed that 'reg' could be used uninitialized if
we are trying to get a PLL to drive VGA and SPLL is already in use
(plls->spll_refcoung != 0).
In the (error) case above, let's return false to the caller and emit an
error.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bspec mentions this for HSW+. I can't quite tell what the effects are,
and I don't easily have a way to test this.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We do this for HDMI already, so I don't know why we wouldn't do
it for SDVO as well.
This is completely untested due to lack of hardware.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This comment looks like some historical leftover. Get rid of it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Change the gen6+ max delay if the pcode read was successful (not the
inverse).
The previous code was all sorts of wrong and has existed since I broke
it:
commit 42c0526c93
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Wed Sep 26 10:34:00 2012 -0700
drm/i915: Extract PCU communication
I added some parentheses for clarity, and I also corrected the debug
message message to use the mask (wrong before I came along) and added a
print to show the value we're changing from.
Looking over the code, I'm not actually sure what we're trying to do. I
introduced the bug simply by extracting the function not implementing
anything new. We already set max_delay based on the capabilities
register (which is what we use elsewhere to determine min and max).
This would potentially increase it, I suppose? Jesse, I can't find the
document which explains the definitions of the pcode commands, maybe you
have it around.
Based on Jesse's response, this could potentially be for -fixes, or
stable, or maybe lead to us dropping it entirely. As the current code is
is, things won't completely break because of the aforementioned
capabilities register, and in my experimentation, enabling this has no
effect, it goes from 1100->1100.
I found this while reviewing Jesse's VLV patches.
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Bikeshed-away the redudant parens spotted by Chris Wilson.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Recommended by Chris.
v2: Make it GEN7_FEATURES, and use it for vlv and hsw also (Ben)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The index variable points at a page table, not a page directory or a
pde. Ben Widawsky fix this up correctly in his ppgtt cleanup, but I've
botched the job and copy&pasted the old confusion from the original
gen6 ppgtt code in
commit def886c376
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jan 24 14:44:56 2013 -0800
drm/i915: vfuncs for ppgtt
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Port C is for eDP. Port B is shared between HDMI and DP.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We'll re-enable select bits as needed after testing and power measurement.
v2: split out wake handling bits (Jani)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Can prevent a hang when we get to tessellation. We need to set bit 15
as well for this workaround.
v2: update changelog with accurate info
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This fixes up broken logic introduced in
commit 90b107c8f7
Author: Shobhit Kumar <shobhit.kumar@intel.com>
Date: Wed Mar 28 13:39:32 2012 -0700
drm/i915: Enable HDMI on ValleyView
That one was probably a rebase fail along the way.
v2: clean up init ordering (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Pimp commit message a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter
Jani Nikula
Ville Syrjälä
Imre Deak
Chris Wilson
Egbert Eich
Jesse Barnes
Rodrigo Vivi
Damien Lespiau
Ben Widawsky
Paulo Zanoni