As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-7-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-6-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id table is moved up before the probe function, as suggested
by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-5-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-4-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-3-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220415160613.148882-2-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3, we can remove the old code
from the loader.c along with the functions only used by the fw_ready()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The fw_ready is handled internally to ipc3, the callback no longer in
use and it is going to be removed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The handling of fw_ready is IPC3 specific, move the needed code from the
loader.c to ipc3.c and stop using the sof_ops(sdev)->fw_ready() callback.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Ajit Pandey <ajitkumar.pandey@amd.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20220421080735.31698-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Once we've set-up the HDA stream and its format, we currently don't
support additional format changes. We already have a protection in the
.prepare case, but this needs to be added in the hw_params too.
In mixing use cases where two DPCM FEs are connected to the same BE,
if can happen that there are multiple calls to the BE hw_params when
the two FEs are configured simultaneously.
This could alternatively be fixed at the DPCM level but that's a more
intrusive change requiring infrastructure changes: this would need to
be paired with the definition of fixed hw_params at the mixer level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do the same operations from different places, add a helper to
enforce consistency and make the programming sequences clearer.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequences are missing a call to snd_soc_dai_set_dma_data() when
the stream is cleared, as well as a release of the stream, and tests
to avoid pointer dereferences.
This fixes an underflow issue in a corner case with two streams paused
before a suspend-resume cycle. After resume, the pause_release of the
last stream causes an underflow due to an invalid sequence.
This problem probably existed since the beginning and is only see with
prototypes of a 'deep-buffer' capability, which depends on additional
ASoC fixes, so there's is no Fixes: tag and no real requirement to
backport this patch.
BugLink: https://github.com/thesofproject/linux/issues/3151
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add comments and re-align with the TRIGGER_SUSPEND case with an
additional call to hda_dai_hw_free_ipc() to free-up resources.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The location of the code was not optimal and prevents us from using
helpers, let's move it to hda-dai.c.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do the same thing from different places, let's use a helper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before suspending, walk through all the widgets to make sure all
refcounts are zero. If not, the resume will not work and random errors
will be reported. Adding this paranoia check will help identify leaks
and broken sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just code move with no functionality change, to clearly separate out
the 'dai' operation from the link DMA ones.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The link DMA state management is handled completely on the host side,
while the DAI operations require an IPC. Split the first part in
dedicated helpers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use helper instead of open-coding the same thing multiple times.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
the argument "struct sof_intel_hda_stream *hda_stream" is not used, remove.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Intel documentation refers to the concepts of 'HDAudio host
DMA' (system memory <--> DSP) and 'HDaudio link DMA' (DSP <-->
peripherals). We currently use the prefix 'hda_link' to describe DAI
operations, which can be confused for dailink operations.
Since the topology tokens refer unambiguously to the 'HDA' dai, let's
drop the link prefix for dai-related ops/callbacks. Conversely let's
use 'hda_link_dma' for routines related to the DMA management. In a
follow-up patch we will introduce the 'hda_dai_link' prefix for dailink
ops/callbacks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The BE DAI driver ops involve operations that are IPC-specific. For ex:
for the HDA DAI, the trigger op involves sending the DAI_CONFIG IPC to
the DSP to stop the DMA for the stop/pause commands. This sequence is
different for IPC3 and IPC4. So, make the dai driver ops IPC-specific
and set the IPC3-specific ops during the ops_init() callback.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system is suspended while a PCM is paused, it doesn't receive
the SUSPEND trigger. So, the SOF driver has to ensure that the PCM and
the widgets associated with the paused PCM are freed in the firmware
during suspend. This is handled in the
sof_tear_down_left_over_pipelines() call. But since the state of this
PCM is SUSPENDED, we end up clearing the prepared flag for the PCM
before freeing it. This results in IPC errors while freeing the widgets.
But because the widget use_counts are reset to 0 even though the IPC
fails, releasing the paused stream after resuming from suspend proceeds
normally.
Fix the IPC errors by removing the clearing of the prepared flag in
sof_set_hw_params_upon_resume(). In fact, we can remove the
sof_set_hw_params_upon_resume() and call
snd_sof_dsp_hw_params_upon_resume() directly. This will ensure that the
PCM is freed in the firmware before the IPC's for freeing the widgets
are sent.
BugLink: https://github.com/thesofproject/linux/issues/3543
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421203201.1550328-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As pointed out by Sascha Hauer, this patch changes:
if (pmc->config && !pcm->config->prepare_slave_config)
<do nothing>
to:
if (pmc->config && !pcm->config->prepare_slave_config)
snd_dmaengine_pcm_prepare_slave_config()
This breaks the drivers that do not need a call to
dmaengine_slave_config(). Drivers that still need to call
snd_dmaengine_pcm_prepare_slave_config(), but have a NULL
pcm->config->prepare_slave_config should use
snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config
callback.
Fixes: 9a1e13440a ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since a pointer to struct snd_dmaengine_pcm_config is passed,
snd_dmaengine_pcm_prepare_slave_config() is no longer called unless it's
explicitly set in prepare_slave_config.
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Suggested-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add two PCI IDs and quirks for APL Chromebooks and Intel IPC4
selection for developers.
cppcheck throws the following warning:
sound/soc/soc-core.c:2773:6: style: Condition '!num_widgets' is always
false [knownConditionTrueFalse]
if (!num_widgets) {
^
sound/soc/soc-core.c:2761:18: note: Assuming that condition
'num_widgets<0' is not redundant
if (num_widgets < 0) {
^
sound/soc/soc-core.c:2766:18: note: Assuming condition is false
if (num_widgets & 1) {
^
sound/soc/soc-core.c:2772:2: note: Compound assignment '/=', assigned
value is 0
num_widgets /= 2;
^
We should check upfront all error conditions.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162505.302132-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sequence for IMR boot is essentially the same as normal boot with the
difference that instead of DMA from host the firmware is loaded from IMR.
Re-structure the code to use the existing sequence and also add fallback
handling in case the IMR boot fails.
Introduce a new flag to make the IMR boot support check simpler.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421202031.1548362-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing code does an init/free for each piece of information
needed. We can instead initialize the NHLT table in the .probe() and
free it in the .remove() callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421201946.1547041-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'w' (struct snd_soc_dapm_widget) is not changing within the function,
there is no reason to check the w->sname more than once as it is not
going to change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421201847.1545686-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to assign spcm to NULL. Removing this assignment also
removes a false alarm reported by cppcheck.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162600.302230-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Raptor Lake P.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Alder Lake PS.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Muralidhar Reddy <muralidhar.reddy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a kernel module parameter for select the non-default IPC type.
This should only be used by developers with access to firmware and
topology files, typically Intel and partners.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As suggested by MrChromebox, the SOF driver can be used with the SOF
firmware binary signed with the production key. This patch adds an
additional check for the ApolloLake SoC before modifying the default
firmware path.
Note that ApolloLake Chromebooks officially ship with the Skylake
driver, so to use SOF the users have to explicitly opt-in with
'options intel-dspcfg dsp_driver=3'. There is no plan to change the
default selection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warning:
>> sound/soc/intel/boards/sof_ssp_amp.c:97:6: warning: variable 'i'
set but not used [-Wunused-but-set-variable]
int i = 0;
^
The device counter is not used when the quirk is not set, which static
analysis cannot know. Move its initialization before the loop to
remove this warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163645.319686-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are currently using generic PSP Mailbox register for sending SHA
complete command to PSP but observe random arbitration issue during
PSP validation as MP0_C2PMSG_26_REG used by other kernel modules.
Use separate mailbox registers and doorbell mechanism to send SHA_DMA
complete command to PSP. This fixes such validation issues and added
flexibility for sending more ACP commands to PSP in future as new mbox
registers i.e MP0_C2PMSG_114_REG and MP0_C2PMSG_73_REG are dedicated
by PSP for ACP communications.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421165820.337207-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to ensure if PSP is mbox ready before and after sending cmd
to PSP over SMN interface. Add method to check MBOX_READY bit of PSP
with some delay over ACP_PSP_TIMEOUT_COUNTER. Replace psp_fw_validate
with new method psp_send_cmd() to send command via psp mailbox.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421165820.337207-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit e138233e56 causes the
following system crash when using audio on G12A/G12B & SM1 systems:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
preempt_count: 10001, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
schedule_preempt_disabled+0x20/0x2c
mutex_lock+0x24/0x60
_snd_pcm_stream_lock_irqsave+0x20/0x3c
snd_pcm_period_elapsed+0x24/0xa4
axg_fifo_pcm_irq_block+0x64/0xdc
__handle_irq_event_percpu+0x104/0x264
handle_irq_event+0x48/0xb4
...
start_kernel+0x3f0/0x484
__primary_switched+0xc0/0xc8
Revert this commit until the crash is fixed.
Fixes: e138233e56 ("ASoC: meson: axg-card: make links nonatomic")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-2-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit bf5e4887ee because
the following and required commit e138233e56
causes the following system crash when using audio:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
Fixes: bf5e4887ee ("ASoC: meson: axg-tdm-interface: manage formatters in trigger")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck throws the following warning:
sound/soc/soc-ops.c:461:8: style: Variable 'ret' is assigned a value
that is never used. [unreadVariable]
ret = err;
^
This seems to be a missing change in the return value.
Fixes: 7f3d90a351 ("ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162328.302017-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas Sound is very complex, and thus it needs to use
rsnd_node_fixed_index() to know enabled pin index.
It returns error if strange pin was selected,
but some codes didn't check it.
This patch 1) indicates error message, 2) check return
value.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmlbgn5t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because Sound Card needs many drivers to probe, current audio-graph-card2
will indicate "Experimental stage" at top of probe function even though
in case it gets -EPROBE_DEFER, thus it will be indicated many times.
This patch indicates it when probe was succeeded.
[ 1.601393] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.721269] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.755231] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.907710] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
...
[ 1.933173] rcar_sound ec500000.sound: probed
[ 1.948875] asoc-audio-graph-card2 sound: Audio Graph Card2 is still under Experimental stage
[ 1.959558] asoc-audio-graph-card2 sound: ak4613-hifi <-> rsnd-dai.0 mapping ok
[ 1.968119] asoc-audio-graph-card2 sound: i2s-hifi <-> rsnd-dai.1 mapping ok
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o80vgn5a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit cfb7b8bf1e ("ASoC: rsnd: tidyup
rsnd_ssiu_busif_err_status_clear()") merged duplicate code, but it didn't
care about default case, and causes smatch warnings.
smatch warnings:
sound/soc/sh/rcar/ssiu.c:112 rsnd_ssiu_busif_err_status_clear() \
error: uninitialized symbol 'offset'.
sound/soc/sh/rcar/ssiu.c:114 rsnd_ssiu_busif_err_status_clear() \
error: uninitialized symbol 'shift'.
This patch cares it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r15rgn6p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The G12A tohdmi has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The AIU CODEC has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The AIU ACODEC has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220420030315.2575691-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The tone generator frequency control just returns 0 on successful write,
not a boolean value indicating if there was a change or not. Compare
what was written with the value that was there previously so that
notifications are generated appropriately when the value changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220420133437.569229-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add alsa snd_soc_pm_ops callback in ACP machine driver to support
suspend and resume operation of sound card components
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220420094442.1352717-1-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In asoc_simple_shutdown() the snd_soc_dai_set_sysclk() function
is called twice with input direction SND_SOC_CLOCK_IN.
Restore one call with output direction SND_SOC_CLOCK_OUT.
Fixes: 5ca2ab4598 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220412111658.11015-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
With additional tests with the introduction of a 'deep-buffer' PCM
device mixed with the regular low-latency path, we came up with two
improvements in the BE state machine and transitions. The short
explanation is that the BE cannot directly use the trigger commands
provided by the FE, and a translation is needed to deal with paused
states.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
The INTEL_IPC4 protocol and firmware architecture will rely on
different sets of firmware binary and topology files. Some platforms
will only support INTEL_IPC4, some will support both INTEL_IPC4 and
SOF_IPC for development, and some will stay with the existing SOF_IPC.
This patchset adds new IPC definitions, and search paths for firmware
and topology files, along with means to override the default IPC type
and search paths for development. The firmware binary names are
aligned with those used by the Intel AVS driver to avoid duplicate
firmware installs, but the topology will have to differ due to driver
architecture differences.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A continuation of avs-driver initial series [1]. This chapter covers
path management and topology parsing part which was ealier path of the
main series. The two patches that represented these two subjects in the
initial series, have been split into many to allow for easier review and
discussion.
AVS topology is split into two major parts: dictionaries - found within
ASoC topology manifest - and path templates.
Dictionaries job is to reduce the total amount of memory
occupied by topology elements. Rather than having every pipeline and
module carry its own information, each refers to specific entry in
specific dictionary by provided (from topology file) indexes. In
consequence, most struct avs_tplg_xxx are made out of pointers.
Path templates are similar to path descriptions found in skylake-driver
and they describe how given path shall look like in runtime - number of
modules and pipelines that shape it and how they are laid out. A single
path template is tied either to FE or BE and thus at most to a single,
user-visible endpoint when speaking of FE.
Path is a software representation of its ADSP firmware equivalent. It's
a logical container for pipelines which are themselves containers - this
time for modules i.e. processing units.
Depending on the number of audio formats supported, each path template
may carry one or more descriptions of given path. During runtime, when
audio format is known, description matching said format is selected and
used when instantiating path on ADSP firmware side through IPCs.
When the BE was in PAUSED state, the correct trigger is PAUSE_RELEASE.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406190056.233481-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 3aa1e96a2b ("ASoC: soc-pcm: fix BE handling of PAUSE_RELEASE")
did not modify the existing logic and kept the same logic for the following
transition
play FE1 -> BE state is START
pause FE1 -> BE state is PAUSED
play FE2 -> BE state is START
stop FE2 -> BE state is STOP <<< !!
release FE1 -> BE state is START
stop FE1 -> BE state is STOP
At the time it was identified by reviewers that a better solution
might consist in
play FE1 -> BE state is START
pause FE1 -> BE state is PAUSED
play FE2 -> BE state is START
stop FE2 -> BE state is PAUSE <<< !!
release FE1 -> BE state is START
stop FE1 -> BE state is STOP
This patch suggest a transition to PAUSE when all the 'active' streams
are paused. This would allow for a more consistent resource management
for platforms where PAUSE and STOP are handled differently.
To track the special case of an FE going from PAUSE_PUSH to STOP, we
add a state variable for each FE context. This 'fe_pause' boolean is
set on PAUSE_PUSH and cleared on either PAUSE_RELEASE and STOP
triggers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406190056.233481-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_SOF_HDA_PROBES must be tristate because the code it builds
depends on code that is tristate.
If SND_SOC_SOF_HDA_PROBES is bool it leads to the following build
inconsistency:
SND_SOC_SOF_HDA_COMMON=m
which selects SND_SOC_SOF_HDA_PROBES
but since this is a bool SND_SOC_SOF_HDA_PROBES=y
SND_SOC_SOF_HDA_PROBES=y
selects SND_SOC_SOF_DEBUG_PROBES=y
so sof-client-probes.c is built into the kernel.
sof-client-probes.c calls functions in sof-client.c, but
SND_SOC_SOF=m
sof-client.c is built into a loadable module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220407153813.1231866-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a basically a platform_data file, so move it out of
the mach/* header directory.
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tomas Cech <sleep_walker@suse.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mach/hardware.h is included in lots of places, and it provides
three different things on pxa:
- the cpu_is_pxa* macros
- an indirect inclusion of mach/addr-map.h
- the __REG() and io_pv2() helper macros
Split it up into separate <linux/soc/pxa/cpu.h> and mach/pxa-regs.h
headers, then change all the files that use mach/hardware.h to
include the exact set of those three headers that they actually
need, allowing for further more targeted cleanup.
linux/soc/pxa/cpu.h can remain permanently exported and is now in
a global location along with similar headers. pxa-regs.h and
addr-map.h are only used in a very small number of drivers now
and can be moved to arch/arm/mach-pxa/ directly when those drivers
are to pass the necessary data as resources.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The WM8958 DSP controls all return 0 on successful write, not a boolean
value indicating if the write changed the value of the control. Fix this
by returning 1 after a change, there is already a check at the start of
each put() that skips the function in the case that there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org
Cc: stable@vger.kernel.org
The micfil driver prints out the IRQ numbers for each interrupt at error
level. This information is useful for debugging at best, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-22-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl_set_clock_params() is used only once and easily be folded into its
caller, do so.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-21-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The "fsl,shared-interrupt" property is undocumented and unnecessary.
Just pass IRQF_SHARED unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-20-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
FSL_MICFIL_RATES and FSL_MICFIL_FORMATS is only used once. Drop
the unnecesary indirection and use SNDRV_PCM_RATE_8000_48000 and
SNDRV_PCM_FMTBIT_S16_LE directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-19-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The micfil driver doesn't use anything from imx-pcm.h. Drop its
inclusion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-18-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
For the quality setting the quality setting register values are directly
exposed to the kcontrol and thus to userspace. This is unfortunate
because the register settings contains invalid bit combinations marked
as "N/A". For userspace it doesn't make much sense to be able to set
these just to see that the driver responds with "Please make sure you
select a valid quality." in the kernel log.
Work around this by adding get/set functions for the quality setting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-17-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The reference manual has this for calculating the micfil internal clock
divider:
MICFIL Clock rate
clkdiv = -----------------
8 * OSR * outrate
(with OSR == Oversampling Rate, outrate == output sample rate)
The driver first sets the MICFIL Clock rate to (outrate * 1024) and then
calculates back the clkdiv value from the above calculation.
Simplify this by using a fixed clkdiv value of 8 and set the MICFIL
Clock rate to (outrate * clkdiv * OSR * 8).
While at it drop disabling the clock before setting its rate. The MICFIL
module is disabled when the rate is changed and it is also resetted
before it is started again, so I doubt it's necessary to disable the
clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-16-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
get_pdm_clk() calculates the PDM clock based on the quality setting,
but really the PDM clock is independent of the quality, it's always
rate * 4 * micfil->osr. Just drop the function and do the calculation
in the caller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-15-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The OSR (OverSampling Rate) setting is set once to the default value
and never changed throughout the driver. Nevertheless the value is
read back from the register for further calculations. Just use the
default value because we know what we have written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-14-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The micfil hardware provides the microphone data on multiple successive
FIFO registers, one register per stereo pair. Also to work properly the
SDMA_DONE0_CONFIG_DONE_SEL bit in the SDMA engines SDMA_DONE0_CONFIG
register must be set. This patch provides the necessary information to
the SDMA engine driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-13-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The i.MX DMA drivers are device tree only, nothing in
include/linux/platform_data/dma-imx.h has platform_data in it, so move
the file to include/linux/dma/imx-dma.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220414162249.3934543-10-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Failed register accesses are really not expected in memory mapped
registers. When it fails then the register access itself is likely not
the reason, so no need to have extra error messages for each regmap
access. Just drop the error messages. This also fixes some places where
a return value is concatenated using 'ret |=' and then returned as
error value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-8-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead regmap_update_bits() use the simpler variants
regmap_[set|clear]_bits() where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-7-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use GENMASK along with FIELD_PREP and FIELD_GET to access bitfields in
registers to straighten register access and to drop a lot of defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-6-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to have defines for the mask of single bits. Also shift is
unused. Drop all these unnecessary defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-5-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
All that the .set_sysclk hook in the micfil driver does is to pass
the sysclk frequency to fsl_micfil_set_mclk_rate(). This function
expects the sample rate as argument though, not any kind of sysclk
frequency. The resulting rate setting of the clock is overwritten
in hw_params anyway, so drop this altogether.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-4-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In get_pdm_clk() REG_MICFIL_CTRL2 is read, but the result is never used.
Drop the unused code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-3-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
in get_pdm_clk() REG_MICFIL_CTRL2 is read twice. Drop second read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-2-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220418110259.2559144-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module on DSP side serves a processing purpose. Depending on its
purpose, it needs different information during its initialization. Add
functions responsible for creating instances of specific module types
given the information coming from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When binding modules to pins other than pin0, sometimes additional
preparations need to be made, depending on the module type.
Add function that prepares modules when necessary before binding them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Creating the pipelines and instantiating the modules alone is
insufficient to have a fully operational stream. Before it can be run,
stream components need to be bound. Add arming functions to ensure all
necessary operations are completed before path is yielded back to the
avs_path_create() caller.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add functions to ease with state changing of all objects found in the
path. Each represents either a BIND/UNBIND or SET_PIPELINE_STATE IPC.
DSP pipelines follow simple state machine scheme:
CREATE -> RESET -> PAUSE -> RUNNING -> PAUSE -> RESET -> DELETE
There is no STOP, PAUSE serves that purpose instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To implement ASoC PCM operations, DSP path handling is needed. With path
template concept present, information carried by topology file can be
converted into runtime path representation. Each may be composed of
several pipelines and each pipeline can contain a number of processing
modules inside. Number of templates and variants found within topology
may vastly outnumber the total amount of pipelines and modules supported
by AudioDSP firmware simultaneously (in runtime) so none of the IDs are
specified in the topology. These are assigned dynamically when needed
and account for limitations described by FIRMWARE_CONFIG and
HARDWARE_CONFIG basefw parameters.
Paths are created on ->hw_params() and are freed on ->hw_free() ALSA PCM
operations. This choice is based on firmware expectations - need for
complete set of information when attempting to instantiate pipelines and
modules on AudioDSP side. With DMA and audio format provided, search
mechanism tests all path variants available in given path template until
a matching variant is found. Once found, information already available
is combined with all avs_tplg_* pieces pointed by matching path variant.
This finally allows to begin a cascade of IPCs which goal is to reserve
resources and prepare DSP for upcoming audio streaming.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare representatives for all crucial elements which stream on ADSP
side is made of. That covers pipelines and modules subject which are
presented by struct avs_path_pipeline and avs_path_module respectively.
While struct avs_path_binding and struct avs_path do not represent any
object on firmware side directly, they are needed to help track the
interconnections and membership of every pipeline and module created.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow topology to specify formatted strings so machine board's
predefined ->link_mask can be used to specify SSP port number
automatically.
This is done to help reduce the amount of topology files as many I2S
configurations contain codec of the same type with little to no
differences in number of scenarios supported - the only difference being
the port number codec is connected to.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AVS topology is split into two major parts: dictionaries - found within
ASoC topology manifest - and path templates.
Add custom handlers for a range of operations available in struct
snd_soc_tplg_ops to allow for actually loading the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Path template is similar to path description found in skylake-driver
and it describes how given path shall look like in runtime - number of
modules and pipelines that shape it and how they are laid out. It is
tied to DAPM widget's (representing either a FE or a BE) private data.
Depending on the number of audio formats supported, each path template
may carry one or more descriptions of given path. During runtime, when
audio format is known, description matching said format is selected and
used when instantiating path on ADSP firmware side through IPCs.
Add parsing helpers to support loading such information from the
topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shape of a path on DSP side, that is, the number and the layout of its
pipelines and modules is paramount for streaming to be efficient and low
power-consuming. Add parsing helpers to support loading such information
from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Path in ADSP firmware is represented by one or more pipelines. Just like
modules, these are described by a config structure. Add parsing helpers
to support loading such information from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Anything that goes beyond module base config is an extension config. It
covers all fields for all specific module types available in ADSP
firmware. Add parsing helpers to support loading such information from
the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AVS topology is split into two major parts: dictionaries - found within
ASoC topology manifest - and path templates.
Dictionaries job is to reduce the total amount of memory
occupied by topology elements. Rather than having every pipeline and
module carry its own information, each refers to specific entry in
specific dictionary by provided (from topology file) indexes. In
consequence, most struct avs_tplg_xxx are made out of pointers.
To support the above, range of parsing helpers for all value-types known
to ALSA: uuid, bool, byte, short, word and string are added. Additional
handlers help translate pointer-types and more complex objects such as
audio formats and module base configs.
Path templates are similar to path descriptions found in skylake-driver
and they describe how given path shall look like in runtime - number of
modules and pipelines that shape it and how they are laid out.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds an IP identifier for each Intel platform. The
identifier will be used to select different code branches or
constants.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose the code loader functions for re-use in new platforms
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the rom_status_reg field to struct sof_intel_dsp_desc and define
it for HDA platforms. This will be used to check the ROM status during
FW boot.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the check_ipc_irq op for HDA platforms and use it
when checking if it is an IPC IRQ.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BIT() macros should be used for all ADSPIC/IS registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the definition of the HDA_CL_STREAM_FORMAT macro from the header
file.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dsp_ops are mostly common between platforms. Introduce a common
structure and an init function to set platform-specific values.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we start having multiple platforms with minor variants, the
use of the const qualifier for 'dsp_ops' is starting to be
sub-optimal: the structures are copied across platforms, with only a
couple of members that differ.
This patch removes the const qualifier without any functionality
changes, and adds an optional initialization callback. In follow-up
patches, the dsp_ops will revisited for Intel HDaudio platforms, with
the differences added programmatically over a common baseline.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the topology filename is modified at a higher level, be it with a
DMI quirk or a kernel module parameter, we don't want to use the
default 'nocodec' topology name extracted from descriptors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing 'tplg_path' module parameter can be used to load
alternate firmware files, be it for development or to handle
OEM-specific or board-specific releases. However the topology filename
is either hard-coded in machine descriptors or modified by specific
DMI-quirks.
For additional flexibility, this patch adds the 'tplg_filename' module
parameter to override topology names.
To avoid any confusion between DMI- and parameter-override, a variable
rename is added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing 'fw_path' module parameter can be used to load alternate
firmware files, be it for development or to handle OEM-specific or
board-specific releases. The firmware name is however non-modifiable
and defined by platform-specific descriptors.
For additional flexibility during development or enable quirks, this
patch adds the 'fw_filename' module parameter to override default
firmware names.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid misleading file names, use different names for INTEL_IPC4
firmware files.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a default IPC type for each platform, along with file
paths to be used for each IPC type. To make reviews simpler, we only
modify platform descriptors in this table, the information will be
used in the next patch.
The Intel IPCv4 is only supported on Intel platforms after APL, and
not by default. In follow-up patches, support for SKL and KBL will be
added, and in those two cases the IPCv4 will be the default (and only
supported mode).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the addition of the IPCv4, we need the ability to select
different paths for firmware and topologies.
First add an indirection. Follow-up patches will add mechanisms to
select a default IPC or override it.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver should use the pci_resource_len() to get the actual length of
pci bar, and compare it with the expect value. If the bar size is too
small (such as a broken device), the driver should return an error.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409143950.2570186-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for external boost voltage, where GPIO1 must control a
switch to isolate CS35L41 from the external Boost Voltage
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220413083728.10730-17-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Internal Boost enable is the default option from reset, but with
external boost support, internal boost must be disabled.
Add the enable of internal boost in cs35l41_boost_config to
centralize the internal boost configuration.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-10-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver can receive an empty hw_config, so mark as valid if
successfully read from device tree/ACPI or set by the driver itself.
Platforms not marked with a valid hw config will not be supported.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-3-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both ASoC and HDA require to configure the GPIOs and Boost, so
create a single shared struct for hardware configuration.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-2-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not
supported by OMAP1 custom implementation of clock API. However, non-CCF
stubs of those functions exist for use on such platforms until converted
to CCF.
Update the driver to be compatible with CCF implementation of clock API.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220407191202.46206-1-jmkrzyszt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220412083000.2532711-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stephen Kitt <steve@sk2.org>:
This series covers all the remaining changes to migrate
sound/soc/codecs i2c probes to probe_new, where the const struct
i2c_client * argument is unused; there are a few remaining files which
use the argument and will need i2c_match_id migration.
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series is continuation of the IPC abstraction in the SOF driver in
preparation for supporting the new IPC supported by the SOF firmware.
It introduces abstraction for top-level IPC ops for sending/receiving
regular and large IPC's.
Peter Ujfalusi (15):
ASoC: SOF: Add helper function to prepare and send an IPC message
ASoC: SOF: Add high level IPC IO callback definitions to ipc_ops
ASoC: SOF: ipc3: Implement the tx_msg IPC ops
ASoC: SOF: ipc3: Use sof_ipc3_tx_msg() internally for message sending
ASoC: SOF: ipc3: Implement the set_get_data IPC ops
ASoC: SOF: ipc3: Implement the get_reply IPC ops
ASoC: SOF: ipc3: Implement rx_msg IPC ops
ASoC: SOF: ipc: Separate the ops checks by functions/topics
ASoC: SOF: ipc: Add check for mandatory IPC message handling ops
ASoC: SOF: ipc: Use the get_reply ops in snd_sof_ipc_get_reply()
ASoC: SOF: ipc: Switch over to use the tx_msg and set_get_data ops
ASoC: SOF: ipc: Switch over to use the rx_msg ops
ASoC: SOF: Add widget_kcontrol_setup control ops for IPC3
ASoC: SOF: sof-audio: Use the widget_kcontrol_setup ops for kcontrol
set up
ASoC: SOF: ipc: Move the ipc_set_get_comp_data() local to ipc3-control
sound/soc/sof/ipc.c | 858 ++---------------------------------
sound/soc/sof/ipc3-control.c | 131 +++++-
sound/soc/sof/ipc3.c | 682 +++++++++++++++++++++++++++-
sound/soc/sof/sof-audio.c | 54 +--
sound/soc/sof/sof-audio.h | 7 +-
sound/soc/sof/sof-priv.h | 28 +-
6 files changed, 880 insertions(+), 880 deletions(-)
--
2.25.1
Merge series from Mario Limonciello <mario.limonciello@amd.com>:
It's not possible to probe for the presence of a DMIC, so the ACP6x
machine driver currently has a hardcoded list of all the systems known
to have a DMIC connected to the ACP.
Although this design works it means that the acp6x driver needs to always
grow with more systems and worse, if an OEM introduces a new system there
will be a mismatch in time that even if the driver (otherwise) works fine
it needs their system added to the list to work.
So this series introduces a _DSD that OEMs can populate into the BIOS to
indicate presence of a DMIC.
sound/soc/tegra/tegra186_asrc.c:90:12: error: ‘tegra186_asrc_runtime_resume’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/tegra/tegra186_asrc.c:80:12: error: ‘tegra186_asrc_runtime_suspend’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: a2df8c2d5b ("ASoC: tegra: Add Tegra186 based ASRC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220411020908.580-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-15-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-14-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-13-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-12-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-11-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-10-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-9-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-8-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-7-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-6-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-5-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-4-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-3-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-2-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the acp6x machine driver requires a hardcoded list of systems
that physically have DMIC connected.
To avoid having to continually add to an evergrowing list of systems add
support for a _DSD that can advertise this.
OEMs can add this _DSD to their BIOS under the ACP device to automatically
add the device to this driver without requiring any driver modifications.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411134532.13538-3-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently all of the quirked systems use the same card and so the
DMI quirk list doesn't contain driver data.
Add driver data to these quirks and then check the data was present
or not. This will allow potentially setting quirks for systems with
faulty firmware that claims to have a DMIC but doesn't really.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411134532.13538-2-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_ipc_set_get_comp_data() only used for kcontrol data update
and it is an IPC3 message parsing function.
Move it out from the generic ipc.c to ipc3-control.c and rename it to
better describe it's function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the local implementation and switch to the IPC neutral ops to
set up the kcontrols associated with the swidget.
The set up call uses snd_sof_ipc_set_get_comp_data() which is largely an
IPC3 parsing function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the widget_kcontrol_setup control IPC ops for IPC3.
The widget_kcontrol_setup callback can be used to set up all
kcontrols associated with the swidget.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new ops for handling message reception.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new ops for sending messages and to handle large component data
set get operation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the get_reply ops to allow IPC dependent handling of the reply message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the mandatory IPC message handling ops are provided by the
IPC implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the mandatory ops checks by topics (pcm and topology for now) to
be able to provide intuitive feedback on the possible missing ops and to
make it easier to add new mandatory ops checks in the future.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the rx_msg callback to handle message reception
for IPC3.
The implementation is equivalent to the currently used code in ipc.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the get_reply callback to copy the reply message
from mailbox to msg->reply_data buffer.
The implementation is equivalent to the currently used code in ipc.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the set_get_data callback for handling large
data set and get.
The set_get_data() in IPC3 can be used only for component messages. The
function expects the caller to prepare the message behind the data pointer
for sending/receiving data. The callback only implements the needed code
to be able to split up a message if needed for transfer.
The set_get_data ops is based on the existing
snd_sof_ipc_set_get_comp_data() and sof_set_get_large_ctrl_data() but made
it generic entry point.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using sof_ipc_tx_message() for sending message, use the
sof_ipc3_tx_msg() directly within ipc3.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the IPC3 tx_msg callback for sending a single
IPC message.
The implementation is equivalent to the currently used code in ipc.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tx_msg(), rx_msg(), set_get_data() and get_reply() ops, which can
be used as a generic API for sending, receiving single messages and
to write and read large data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new sof_ipc_send_msg() can be used by IPC dependent code to prepare
the ipc->msg for a new message transmission and then call in to platform
code to send the message.
Higher level code should be handling the completion and reply.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After a successful lpass_macro_pds_init() call, lpass_macro_pds_exit() must
be called.
Add the missing call in the error handling path of the probe function and
use it.
Fixes: 9e3d83c528 ("ASoC: codecs: Add power domains support in digital macro codecs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5b5a015a9b1dc8011c6a4053fa49da1f2531e47c.1648969065.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jiaxin Yu <jiaxin.yu@mediatek.com>:
The series reuses mt8192-mt6359-rt1015-rt5682.c for supporting machine
driver with rt1015p speaker amplifier and rt5682s headset codec.
Fix the following coccicheck review:
./sound/soc/mediatek/mt8195/mt8195-mt6359.c:1657:1-2:
mt8195_mt6359_dt_match is not NULL terminated at line 1657
Fixes: 86a6b9c9df ("ASoC: mediatek: mt8195: add machine support for max98390 and rt5682")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220408100309.2495462-1-lv.ruyi@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using the rt5682s codec together with rt1015p on
mt8192-mt6359 machines. All configurations are shared with the rt5682
codec variant, so simply select the SND_SOC_RT5682S config to ensure the
codec is present and set the correct card name. The codec will be linked
to by pointing to it in the headset-codec property in the devicetree.
While at it, also create macros for the names of the different codec
variants supported by this driver, as well as rename occurrences of
rt1015p_rt5682 to rt1015p_rt5682x, since they are shared between rt5682
and rt5682s.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220408060552.26607-5-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the refactoring to allow the same machine driver to be used for
the rt1015(p) and rt5682(s) codecs on the MT8192 platform, parse the
rt5682(s) codec from the headset-codec property in the devicetree and wire
it to the I2S8 and I2S9 backends.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220408060552.26607-4-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the refactoring to allow the same machine driver to be used for
the rt1015(p) and rt5682(s) codecs on the MT8192 platform, parse the
rt1015(p) codecs from the speaker-codecs property in the devicetree and
wire them to the I2S3 backend, instead of hardcoding the links and
selecting through the compatible.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220408060552.26607-3-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mauro Carvalho Chehab <mchehab@kernel.org>:
Huawei Matebook D15 uses two different GPIOs are used to control the output:
- gpio0 controls the speaker output;
- gpio1 controls the headphone output.
Changing both at the same time cause spurious events that are mis-interpreted
as input events, causing troubles on apps. So, a delay is needed before turning
on such gpios.
Also, the headset microphone is connected to MIC1, instead of MIC2 port.
With this patch, plugging a headphone causes a jack event to trigger the speaker
supply, powering down the speaker and powering up the headphone output.
Removing the headphone also triggers the power supply, powering up the speaker
and powering down the headphone.
The headset microphone also works.
Based on experimental tests, Huawei Matebook D15 actually uses
both gpio0 and gpio1: the first one controls the speaker, while
the other one controls the headphone.
Also, the headset is mapped as MIC1, instead of MIC2.
So, add a quirk for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/d678aef9fc9a07aced611aa7cb8c9b800c649e5a.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The headset/internal mic can either be routed as mic1/mic2
or vice-versa.
By default, the driver assumes that the headset is mapped as
mic2, but not all devices map this way.
So, add a quirk to support changing it to mic1, using mic2
for the internal analog mic (if any).
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/5d88fc29b79be7ab77dae391c8e5ee929fd36c27.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices may use both gpio0 and gpio1 to independently switch
the speaker and the headphone.
Add support for that.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/535454c0c598a8454487fe29b164527370e2db81.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for the support of an additional gpio for headphone
control, rename GPIOs to make explicit references to speakers and
gpio0 or gpio1.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/3008c576ca45d5cc99ad4a18d1d30de45a0aff80.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8195 shutdown callback function implementation to ensure that
shutdown flow is called to shutdown dsp core, disable adsp clock, and
power off dsp sram correctly during reboot flow.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220406194048.289787-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add shutdown callback function for SOF OF device and call
snd_sof_device_shutdown in sof_of_shutdown callback for DSP
shutdown sequence.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220406194048.289787-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().
The following log reveals it:
[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 17.824467] Call Trace:
[ 17.824774] <TASK>
[ 17.825040] regulator_bulk_free+0x82/0xe0
[ 17.825514] devres_release_group+0x319/0x3d0
[ 17.825882] i2c_device_probe+0x766/0x940
[ 17.829198] i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The left speaker of max98373 uses spk_r_endpoint, and right
speaker uses spk_l_endpoint, this is obviously wrong.
This patch corrects the endpoints for max98373 codec.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SIDO(Single-Inductor Dual-Ouput) Buck powers up both analog and digital
circuits along with internal memory, powering off this is the last thing
that codec should do when going to very low power.
Current code was powering off this Buck if there are no users of sysclk,
which is not correct. Powering off this buck will result in no register access.
This code path was never tested until recently after adding pm support
in SoundWire controller. Fix this by removing the buck poweroff when the
codec is active and also the code that is not used.
Without this patch all the read/write transactions will never complete and
results in SLIMBus Errors like:
qcom,slim-ngd qcom,slim-ngd.1: Tx:MT:0x0, MC:0x60, LA:0xcf failed:-110
wcd934x-codec wcd934x-codec.1.auto: ASoC: error at soc_component_read_no_lock
on wcd934x-codec.1.auto for register: [0x00000d05] -110
qcom,slim-ngd-ctrl 171c0000.slim: Error Interrupt received 0x82000000
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20220407094313.2880-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
scontrol doesn't get freed when kstrdup returns NULL.
Fix by free iscontrol in that case.
scontrol = kzalloc(sizeof(*scontrol), GFP_KERNEL);
if (!scontrol)
return -ENOMEM;
scontrol->name = kstrdup(hdr->name, GFP_KERNEL);
if (!scontrol->name)
return -ENOMEM;
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220318021616.2599630-1-liaoyu15@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We set the cpu_dai capture_ or playback_widget on widget_ready but
never clear them, which leads to failures when unloading/reloading a
topology in modprobe/rmmod tests
BugLink: https://github.com/thesofproject/linux/issues/3535
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406191606.254576-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch takes a defensive programming and paranoid approach in case
the parent device (SoundWire) is pm_runtime resumed but the rt711
device is not. In that case, during the attachment and initialization,
a jack detection workqueue can be scheduled. Since the pm_runtime
suspend routines will not be invoked, the sequence to cancel all
deferred work is not executed, and the jack detection could happen
after the bus stops operating, leading to a timeout.
This patch applies the same solution to rt5682, based on the
similarities between codec drivers. The race condition with rt5682 was
not detected experimentally though.
BugLink: https://github.com/thesofproject/linux/issues/3459
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192005.262996-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405173952.2180743-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220405164031.2160888-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1016 driver wasn't listed in Kconfig and Makefile, which AFAICT
means it isn't ever built. This patch adds the appropriate entries to
Kconfig and Makefile.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405171158.2168762-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163618.2158090-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405130326.2107293-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163400.2156631-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
wm8731.c is excluded and will be submitted separately.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405122411.2096387-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163533.2157401-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163750.2158916-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Renesas is the only user of ak4613 driver on upstream for now.
It has STEREO/TDM512/TDM256/TDM128 mode, but STEREO only is used,
because of Renesas board connection.
I noticed that I can test first 2ch out of TDM256 mode 8ch
Playback even in such a situation.
base-commit: 3123109284
Follow Intel's design to replace max98360a amp SSP2 reather than SSP1
by judging DMI_OEM_STRING in sof_rt5682_quirk_table struct.
And reusing max98357's topology since DAI setting could be leveraged.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220324084708.2009375-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactoring in commit a50b7926d0 ("ASoC: fsl_sai: implement 1:1
bclk:mclk ratio support") led to the bypass never happening
as (ratio = 1) was caught in the existing if (ratio & 1) continue;
check. The correct check sequence instead is:
- skip all ratios lower than one and higher than 512
- skip all odd ratios except for 1:1
- skip 1:1 ratio if and only if !support_1_1_ratio
And for all others, calculate the appropriate divider. Adjust the
code to facilitate this.
Fixes: a50b7926d0 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220405155731.745413-1-a.fatoum@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't dereference simple_dai before it has been checked for NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1e974e5b82 ("ASoC: audio_graph_card2: Add support for variable slot widths")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220404113252.1152659-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This adds basic audio support for the Cirrus Logic CS35L45 amplifier.
The first two patches add two generic helpers to ASoC, and patch 3 is
a kunit test for patch 2.
Merge series from Heiner Kallweit <hkallweit1@gmail.com>:
On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). The proposed solution allows
other drivers to adopt the same approach with minimal effort.
With the patch the error is gone and that's the debugfs entries.
/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). With the patch the error is gone
and that's the debugfs entries.
/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/38053baf-c33b-7fdf-7593-99b22153a9c0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow the component debugfs_prefix to be set from
snd_soc_component_driver. First use case is avoiding a duplicate
debugfs entry error in case a device has multiple components
which have the same name therefore.
Note that we don't set component->debugfs_prefix if it's set already.
That's needed because partially component->debugfs_prefix is set
before calling snd_soc_component_initialize().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d18bff6a-1df1-5f95-0cf8-10dbaa62d7be@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AK4613 has STEREO/TDM512/TDM256/TDM128 mode.
Renesas is the only user of ak4613 on upstream for now,
and is using it as STEREO mode, because of board connection.
Thus, current driver is supporting STEREO mode only, and other
modes are not supported.
But I noticed that I can try first 2ch out of TDM256 mode 8ch
Playback even in such a situation.
But because of board connection, I can't test full TDM256 mode,
and/or other TDM mode. Thus I don't want to add new DT propaty for now.
This patch enables TDM256 mode test by "ifdef style",
but it has no effect to current supported STEREO mode.
You can define AK4613_ENABLE_TDM_TEST to try TDM256 mode.
Please don't hesitate to break current code if you can add full TDM256
and/or other TDM mode. You don't need to care compatibility with Renesas.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rskp9l0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM support needs to use constraint_channels.
This patch renames current constraint to constraint_rates for it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6d0p9l7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current priv is using ->iface, but it is not good match
to support TDM. This patch adds ->ctrl1 instead of it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkxgp9lh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas is only user of ak4613 on upstream, and it is tested
only under "clock consumer" because of board mounting situation.
Thus, "clock provider" is not supperted/tested.
This patch return error if it was setup as clock provider.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czhwp9lq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ak4613 driver is assuming symmetric format.
Thus, we don't need to have asymmetric table for judging the
iface at .hw_param.
This patch cleanup ak4613_interface for it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ee2cp9lz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to use mutex_lock() for priv->cnt / priv->iface,
but we are missing it at ak4613_dai_startup().
This patch adds missing mutex_lock() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsmsp9m7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L45 is a 15 V Boosted Mono Class D Amplifier with DSP
Speaker Protection and Adaptive Battery Management.
This initial driver provides standard non-boosted audio operation
without the DSP.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new kunit test for soc-utils and use it to test
snd_soc_tdm_params_to_bclk().
The test uses a table of values to avoid the possibility that an
on-the-fly generator contains the same algorithmic error as the
function-under-test and so fails to detect a bug.
There is no need to test every possible combination of values.
Enough test cases are included to give confidence that the function
is producing the correct results.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function snd_soc_tdm_params_to_bclk() to calculate
the bclk from params info and the tdm sots configuration.
When using a TDM frame of N slots of width W bits:
bclk = sample_rate * N * W
As a convenience to simplify calling code, if the slot count or
slot width are 0 a value will be obtained from the params. This
allows calling code to use this one function to handle cases of
TDM where only one parameter is fixed, or I2S where the slot width
is fixed (for example to set a 32-bit slot for 24-bit samples).
Also as a convenience the slot count can optionally be rounded up
to a multiple. This is mainly useful for I2S systems, since I2S has
two phases of LRCLK the number of slots is always a multiple of 2.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This node pointer is returned by of_parse_phandle() with
refcount incremented in this function.
Calling of_node_put() to avoid the refcount leak.
Fixes: 8625c1dbd8 ("ASoC: mediatek: Add mt2701-wm8960 machine driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404093526.30004-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call of_node_put(platform_node) to avoid refcount leak in
the error path.
Fixes: 94319ba10e ("ASoC: mediatek: Use platform_of_node for machine drivers")
Fixes: 493433785d ("ASoC: mediatek: mt8173: fix device_node leak")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220404092903.26725-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_snd_soc_register_component() may fails, we should check the error
and do the corresponding error handling.
Fixes: 150db8c5af ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220403115239.30140-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to call clk_put() to undo clk_get() in the error path.
Use devm_clk_get() to obtain a reference to the clock, It has
the benefit that clk_put() is no longer required.
Fixes: 0d6a04da9b ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404090753.17940-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sameer Pujar <spujar@nvidia.com>:
This series adds support for Asynchronous Sample Rate Converter (ASRC)
module on Tegra186 and later generations of SoCs. ASRC is a client of
AHUB. The driver and DT support is added to make it work with Tegra
audio graph card. The module can be plugged into audio path using ALSA
mixer controls.
ASRC supports two modes of operation, where it gets the ratio info
from SW and ratio detector module. Presently the support is added for
SW mode.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Following patches contain minor changes, cleaning up code to be easier
to read. Clean up few loops, to be simpler or altogether remove them.
Rename some things to make code easier to understand.
Merge series from Mark Brown <broonie@kernel.org>:
This series contains a bunch of fairly minor changes which overhaul and
modernise the WM8731 driver, there should be no impact on the driver's
functionality.
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series includes some miscellaenous fixes pertaining to IPC, DMA
buffer and DMA trace.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
This series of patches adds support for mt8195 board with mt6359, max98390
and rt5682. To prevent from copy-paste components, mt8195 machine
drivers and dt-bindings are merged in the patch.
Merge series from Mark Brown <broonie@kernel.org>:
At some point the machine driver for the audio subsystem on the
AT91SAM9G20-EK appears to have bitrotted, no longer probing due to
effects of the transition to the common clock framework. The first patch
in this series fixes the initial probe problem, with the rest of the
series being random other fixes and cleanups I noticed while looking at
the driver.
We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers
a warning calltrace like below:
cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24
cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0
================================================================================
UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
<TASK>
show_stack+0x52/0x58
dump_stack_lvl+0x4a/0x5f
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? regmap_unlock_mutex+0xe/0x10
cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
When both bitoffset and otp_map[i].size are 0, the line 836 will
result in GENMASK(-1, 0), this triggers the shift-out-of-bounds
calltrace.
Here add a checking, if both bitoffset and otp_map[i].size are 0,
do not run GENMASK() and directly set otp_val to 0, this will not
bring any function change on the driver but could avoid the calltrace.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
otp_map[].size is a key variable to compute the value of otp_val and
to update the bit_offset, it is helpful to debug if could put it in
the debug log.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220324081839.62009-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bug is here:
if (!dai) {
The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682_set_bclk1_ratio(dai, factor);'.
To fix the bug, just return rt5682_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;
Cc: stable@vger.kernel.org
Fixes: ebbfabc16d ("ASoC: rt5682: Add CCF usage for providing I2S clks")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081002.12684-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These two bug are here:
list_for_each_entry_safe_continue(w, n, list,
power_list);
list_for_each_entry_safe_continue(w, n, list,
power_list);
After the list_for_each_entry_safe_continue() exits, the list iterator
will always be a bogus pointer which point to an invalid struct objdect
containing HEAD member. The funciton poniter 'w->event' will be a
invalid value which can lead to a control-flow hijack if the 'w' can be
controlled.
The original intention was to continue the outer list_for_each_entry_safe()
loop with the same entry if w->event is NULL, but misunderstanding the
meaning of list_for_each_entry_safe_continue().
So just add a 'continue;' to fix the bug.
Cc: stable@vger.kernel.org
Fixes: 163cac061c ("ASoC: Factor out DAPM sequence execution")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220329012134.9375-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CATPT_SSP_IFACE_LAST is being used only to calculate CATPT_SSP_COUNT.
Make CATPT_SSP_COUNT part of the enum directly and remove the redundant
constant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220403141647.1037173-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Control the regulators separately instead of using regulator_bulk to
accord to the timing request in the datasheet.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220328053338.21441-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the scontrol->priv is freed up during load operation it should be set
to NULL to be safe against double freeing attempt.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114757.32551-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325170734.1216018-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325162515.1204107-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220325164828.1209201-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in
the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN
to report a shift-out-of-bounds warning in the cs35l41_otp_unpack()
since the last entry in the array will result in GENMASK(-1, 0).
UBSAN reports this problem:
UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
<TASK>
show_stack+0x52/0x58
dump_stack_lvl+0x4a/0x5f
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? regmap_unlock_mutex+0xe/0x10
cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c]
i2c_device_probe+0x252/0x2b0
Fixes: 6450ef5590 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier")
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220328123535.50000-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
otp_map[].size is a key variable to compute the value of otp_val and
to update the bit_offset, it is helpful to debug if could put it in
the debug log.
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328123535.50000-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These structs only have their address assigned to the
dapm_{routes,widget} fields in the snd_soc_card struct,
both which are pointers to const data. Make them const to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220330204227.25081-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
This patch follows the model set by da7218_of_get_id().
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20220325171904.1223539-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220325171243.1218003-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It seems that flush_scheduled_work() is called without any real
purpose at sst_context_cleanup() (the driver doesn't put works on the
global queue at all). As the flush_schedule_work() function is going
to be abolished in near future, let's drop it now.
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220322154826.19400-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220325165452.1212975-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This function is an analogue of snd_soc_of_get_dai_link_codecs to help
machine drivers read CPU DAI lists from devicetrees.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220331000449.41062-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update error handling in power domain init and exit handlers, as existing handling
may cause issues in device remove function.
Use appropriate pm core api for power domain get and sync to avoid redundant code.
Fixes: 9e3d83c528 ("ASoC: codecs: Add power domains support in digital macro codecs")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1647965937-32203-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new sound control LED layer instead the direct ledtrig_audio_set()
call - see 22d8de62f1 ("ALSA: control - add generic LED trigger module
as the new control layer").
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220329120039.2394138-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
At the kzalloc() call in dpcm_be_connect(), there is no spin lock involved.
It's merely protected by card->pcm_mutex, instead. The spinlock is applied
at the later call with snd_soc_pcm_stream_lock_irq() only for the list
manipulations. (See it's *_irq(), not *_irqsave(); that means the context
being sleepable at that point.) So, we can use GFP_KERNEL safely there.
This patch revert commit d8a9c6e1f6 ("ASoC: soc-pcm: use GFP_ATOMIC for
dpcm structure") which is no longer needed since commit b7898396f4
("ASoC: soc-pcm: Fix and cleanup DPCM locking").
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e740f1930843060e025e3c0f17ec1393cfdafb26.1648757961.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The scontrol->name is allocated with kstrdup, it must be freed before the
scontrol is freed to avoid leaking memory.
The constant leaking happens via sof_widget_unload() path on every module
removal.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114845.32747-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bug is here:
if (!dai) {
The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682s_set_bclk1_ratio(dai, factor);'.
To fix the bug, just return rt5682s_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;
Cc: stable@vger.kernel.org
Fixes: bdd229ab26 ("ASoC: rt5682s: Add driver for ALC5682I-VS codec")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081300.12962-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Academic correction of error handling:
In case the allocation of kc or kcontrol_type fails the correct label to
jump is hdr_err since the template.sname has been also allocated at this
point.
Fixes: d29d41e28e ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114957.519-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AT91SAM9G20-EK audio driver is replacing any error code returned by
atmel_ssc_set_audio() with -EINVAL which could be unhelpful for debugging.
Pass through the error code, and include it in the log message we print for
good measure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-4-broonie@kernel.org
The error handling in the AT91SAM9G20-EK machine driver probe did not
consistently free the SSC in error paths, sometimes immediately returning
an error rather than doing cleanup. Fix this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-3-broonie@kernel.org
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC, intended in the reference software to be supplied
using PLLB and programmed to 12MHz. As originally written for use with a
board file the audio driver was responsible for configuring the entire tree
but in the conversion to the common clock framework the registration of
the named pck0 and pllb clocks was removed so the driver has failed to
instantiate ever since.
Since the WM8731 driver has had support for managing a MCLK provided via
the common clock framework for some time we can simply drop all the clock
management code from the machine driver other than configuration of the
sysclk rate, the CODEC driver still respects that configuration from the
machine driver.
Fixes: ff78a189b0 ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-2-broonie@kernel.org
This patch adds support for mt8195 board with mt6359, max98390 and
rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to reuse the same configurations in user space,
rename the controls to generic names.
"Headphone Jack" -> "Headphone"
"Speakers" -> "Ext Spk"
"Left Speaker" -> "Left Spk"
"Right Speaker" -> "Right SPk"
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because most functions can be reused in different codec combinations,
mt8195 machine drivers are combined to one common file.
The model and compatible string are used to decide which codecs are
being used.
As a result, We can prevent from copy-paste functions when new codec
combination is introduced.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revise driver for the coming driver combination.
There are two major parts including in the patch.
1. Apply some suggested changes used in mt8195-mt6359-rt1011-rt5682.c.
2. Reorder the layout for centralizing the codec related code.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Placing both the I2C and SPI code in the same module causes problems with
mixes of modular and non-modular builds of the buses so it's generally bad
practice. As with other drivers split the bus code out of the WM8731 driver
into separate modules.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The code for initialising the MCLK and mutex is identical in the I2C and SPI
probe functions so just move this out into wm8731_init().
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The supplies used by the wm8731 do not depend on the bus and there is no
need to do anything with the supplies prior to instantiating the regmap so
move the request into wm8731_init().
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the I2C and SPI bus code register the component immediately after they
call wm8731_hw_init(), factor the code out into the the common function and
rename it to just be plain wm8731_init() while we're at it since it's not
just for hardware init any more. This refactoring means we need to move the
function after the declaration of the component driver.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of retiring the old defines used to specify DAI formats update the
wm8731 driver to use the modern names.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Other functions used for callbacks are named after function they call,
however function calling control_load seems to be an exception. Rename
it to soc_tplg_control_load().
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Error message refers to mixer, but it is used for various other types of
controls, so change it to refer to generic "controls".
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Name of SOC_TPLG_PASS_MIXER pass is bit confusing, suggesting that it
may only apply to mixers. As it is used for all control types, change
name to SOC_TPLG_PASS_CONTROL.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In practice soc_tplg_is_eof() returns boolean value and caller uses the
return value in such way, so convert the function to really do it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Functions creating kcontrols as written allow for creation of multiple
kcontrols at the same time, but in practice they are called for each
kcontrol individually. Remove unnecessary loop as code always loops once
anyway. This reduces intendation level allowing for some code to be put
on one line instead of multiple lines.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'while' loop can be replaced with a 'for' loop, making it more clear
about what possible values there are, by having all of it in one place,
instead of scattered around.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add AHUB routes for ASRC module. The ASRC module can be plugged into audio
path as per the need. The routing controls can be used to setup the audio
path with ASRC similar to the already existing routes. The routes are added
to Tegra186 and later Tegra SoCs where ASRC module is present.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
of the input signal from one frequency to another. It can handle over a
wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
ASRC has two modes of operation. One where ratio can be programmed in SW
and the other where it gets the information from ratio estimator module.
The latter mode above can help address the cases where the sample rate is
not known at the stream set up time or is potentially time varying.
In addition, the ratio between input and output sample rate can be any
arbitrary number and the input and output clocks could be derived from
asynchronous clocks.
This patch registers ASRC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes ASRC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After the free PCM action is executed, no matter what
the return result is, it will return directly in sof_pcm_trigger.
So the return statement here is redundant.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header field is no longer used by the underlying code and
can be dropped from the snd_sof_ipc_msg struct.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header parameter is not used anymore and now it can be dropped from
the parameter list of tx_message().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a local reply to first read out the header from the
mailbox then memcpy it or read it again to msg->reply_data, read it
directly to it's final place from the start.
If we received an error we do not need to do a memcpy anymore.
If the reply is reporting a success then we don not need to read the reply
again from the mailbox if the reply_size equals to the already read header
size.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system enters s0ix, the dma trace won't be used. Otherwise,
the DMA will access the host memory, which will prevent entering
S0ix. Driver has notified firmware not to send message through
dma trace. Let's also trigger stop dma trace in driver side.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the interface to stop the DMA trace for suspend. Replace the
snd_sof_init_trace_ipc() and snd_sof_release_trace() calls with more
explicit interface for PM (the sole user for this interface).
The new snd_sof_trace_suspend() call takes the target PM state as argument,
allowing the trace implementation to decide how to handle the transition.
Use this information to release DMA resources only if DSP is suspended and
will not remain in D0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Access through mmapped memory is not supported and it is explicitly
disabled with scontrol->readback_offset = 0; when a control is created.
Remove the dead code and the confusion around this feature.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the ipc->max_payload_size for validating that the message or reply
size can be supported.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The max_payload_size is an IPC level constraint. Add a new field,
max_payload_size to struct snd_sof_ipc and set it during IPC init.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dmab and dmab_bdl is not used by any platform, it can be removed from
struct snd_sof_dev.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to use the sdev->dmab and sdev->dmab_bdl as the buffers
are only used locally: allocated used and freed in the same function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just a few fixes that have been gathered since the previous PR.
- An additional fix for potential PCM deadlocks
- A series of HD-audio CS8409 codec patches for new models
- Other device specific fixes for HD-audio, ASoC mediatek, Intel,
fsl, rockchip
-----BEGIN PGP SIGNATURE-----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=MFKn
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few fixes that have been gathered since the previous pull:
- An additional fix for potential PCM deadlocks
- A series of HD-audio CS8409 codec patches for new models
- Other device specific fixes for HD-audio, ASoC mediatek, Intel,
fsl, rockchip"
* tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
ALSA: hda: Avoid unsol event during RPM suspending
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
ALSA: hda/cs8409: Add new Dolphin HW variants
ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg
ALSA: hda/cs8409: Support new Warlock MLK Variants
ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants
ALSA: hda/cs8409: Re-order quirk table into ascending order
ALSA: hda/cs8409: Fix Warlock to use mono mic configuration
ALSA: cs4236: fix an incorrect NULL check on list iterator
ALSA: hda/realtek: Enable headset mic on Lenovo P360
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
ALSA: hda/realtek: Add mute and micmut LED support for Zbook Fury 17 G9
ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B
ASoC: fsl-asoc-card: Fix jack_event() always return 0
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
A few fixes that came in during the merge window, all fairly routine.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmJEQ4YACgkQJNaLcl1U
h9DaQAf/VgSwgkvvN9ch08wPBHxZUvZ4JJ+mMGPUy1Qq5bKxZn6BPD8PdxnQY2Ni
LwFS3sAdVcZPnwIGt6HhmEtTN/fB85mIM8gF6XLlYurcPzY1mpwM8F52IwxVKPDt
DCOMEmC95NHf+Cw+ukH0SjGELF7xVe7GVdrDrnEqZUuEsu0V5pKsvSAuKJEvgXnU
YcYEOB+KDhQUnGVoYZJ38yQ+PLKn9XYz8XHddksqc1n89h8gk9pkj0YJDIe2ePnb
8vxycHmjj+z0CgAy8v9uQDMkjpnFyzvtZ3YQtZccekZiTKnPY8LhUKnAly/MIfGJ
Usxuo4CA3FDNQLwzNFoIYFNq2HdKdA==
=DQFJ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A few fixes that came in during the merge window, all fairly routine.
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
If SND_SOC_SOF_PCI_DEV is n, bulding fails:
sound/soc/sof/intel/pci-tng.o:(.data+0x1c0): undefined reference to `sof_pci_probe'
sound/soc/sof/intel/pci-tng.o:(.data+0x1c8): undefined reference to `sof_pci_remove'
sound/soc/sof/intel/pci-tng.o:(.data+0x1e0): undefined reference to `sof_pci_shutdown'
sound/soc/sof/intel/pci-tng.o:(.data+0x290): undefined reference to `sof_pci_pm'
Make SND_SOC_SOF_MERRIFIELD select SND_SOC_SOF_PCI_DEV to fix this.
Fixes: 8d4ba1be3d ("ASoC: SOF: pci: split PCI into different drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220323092501.145879-1-zhengbin13@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays with
flexible-array members. This patch has been baking in linux-next for a
whole development cycle.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmI6GIUACgkQRwW0y0cG
2zFLWw/+OB1gZeQD3boKpUMntWnn6wjhUxdrO8CYkpzG+B+8TFECXNjy8HV1CSiw
GKKRndYELOyYaD5o/F2vtPe10iPHbrdIlMFRPBRoht0/cvSZgzHlfT8EjWQwerYY
dieztUFKjeSj0MXivdNDnKOTm8o9cz8KmCrWFP+My37Fasn/9+nBX8iNVIvAX4xy
T+IVmjtDifQUsTs298UGnBvDeuZOiGHhXXU5rq6lIX0Rl554OsWZW94d6jUPj/h7
t1v6jdojNuyaMKn45/xnPj9VvmDiSu3K67m3fjRdzLPDOhISjr2fw4KEUOKdsebh
yJ9t5u8IufyPbm9kyI+rZt+T8ZlV2/qt2+mt6QgtDMnWrs+4nU15JY0SHImMSBZQ
rBEZcQlrIcGJ+CsNB8Y7jIGYO0SSkhodAvfl0LRA0AbTqLGqq0OkAQS5D52r3H2r
uz6xdYb7kG43XaRyaAIPqhZsp/jk2NrXvEvin2tSaXZFR1cxp+oxcV2UajmnOU6i
EIBS4PzJnYx2RZRa+h8YbBa/+D4N6+fj/tjmwBawiUBPjjaLAsGFNwUHqvBoD05S
bk6oXi654NBwVjsknZ0grVz0TtSvdZ3uJL5FZApTOHITqH8vlxlNefmHri4vZRZO
NN7NIQ0yaUCnorzMg+vP8ZtflhQwrMJbjwIS9YD0RHd7MBhYX8k=
=xZD2
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
SoC specific code is generally used for older platforms that don't (yet)
use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire
-----BEGIN PGP SIGNATURE-----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=2fmA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"SoC specific code is generally used for older platforms that don't
(yet) use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire"
* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: remove support for NOMMU ARMv4/v5
ARM: PXA: fix up decompressor code
soc: microchip: make mpfs_sys_controller_put static
ARM: pxa: remove Intel Imote2 and Stargate 2 boards
ARM: mmp: Fix failure to remove sram device
ARM: mstar: Select ARM_ERRATA_814220
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Remove feature bit accessors
net: ixp4xx_hss: Check features using syscon
net: ixp4xx_eth: Drop platform data support
soc: ixp4xx-npe: Access syscon regs using regmap
soc: ixp4xx: Add features from regmap helper
...
It's been a fairly calm development cycle. There are a few
last-minute ALSA core fixes, most notably for covering PCM ioctl
races, but the most of rest are device-specific changes.
Below are some highlights:
* ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
* ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
* HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
* USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices
-----BEGIN PGP SIGNATURE-----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=5cCU
-----END PGP SIGNATURE-----
Merge tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
SND_SOC_DAIFMT_DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
SND_SOC_DAIFMT_DSP_B: PCM no delay mode, L data MSB during FRM LRC
Fixes: 081068fd64 (ASoC: rockchip: add support for i2s-tdm controller)
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220318100146.23991-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4aDoACgkQJNaLcl1U
h9BPKgf/XSKCt67IzrbnI9UXp1Q13C54z57e+nGr4LBSRraT/WwdXFevefC6JZDq
bYQWhigFrQyyYSyxVJYIvtywXXpMzJ1ypzHqcBGmqCufoX0zoaRwTFYg60yiYqdy
cDsX82/1bhI9Dp3RWaEKaMyaa9FI0Kr3WTA6EKdo592u0hxj4UcK51r7qsp1JpsR
tQWGMYqqwtajhamFgrIlKiJDDVnv2qEhrWdho5W/FPAby+fsJ6VJBMhwEx/F7cXu
Mjfa0k2MoMAlNX9DxtIHweVECaN32HJsytrbgUAdYnBoGaZNkXwLwvyp9RIeDAMP
NZ+w3lwFLw1N8S2ho6kqtDpO+tJU0Q==
=Y6/E
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.18
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
Today, hp_jack_event and mic_jack_event always return 0. However,
snd_soc_dapm_disable_pin and snd_soc_dapm_enable_pin may return a
non-zero value, this will cause the user who calling hp_jack_event
and mic_jack_event don't know whether the operation was really
successfully.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20220321065754.18307-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series is a continuation to the SOF IPC abstraction work to support
the new IPC version introduced in the SOF firmware. It makes the top-level
control IO, PCM and PM code IPC-agnostic. Other than the first patch,
the rest are purely for abstraction and include no changes in
functionality.
The correct property is 'microchip,mic-pos', not 'mchp,mic-pos', so
replace all occurences of 'mchp,mic-pos' with 'microchip,mic-pos'.
Fix a multi-line comment format while we are at it.
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220318092609.130901-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will help make the code for getting the mclk and bclk IPC specific.
Add the implementation for IPC3 as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-20-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce two new ops, set_up_all_pipelines and tear_down_all_pipelines
in struct ipc_tplg_ops and define these for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-19-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will be used in IPC3-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-18-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the dai_link_fixup PCM op for IPC3 and use it
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-17-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stephen Kitt
Peter Ujfalusi
Pierre-Louis Bossart
Ranjani Sridharan
Codrin Ciubotariu
Mark Brown
Gongjun Song
Muralidhar Reddy
Rander Wang
ChiYuan Huang
Ajit Kumar Pandey
Neil Armstrong
Kuninori Morimoto
Steve Lee
Minghao Chi
Olivier Moysan
Richard Fitzgerald
Shengjiu Wang
Arnd Bergmann
Sascha Hauer
Srinivasa Rao Mandadapu
Cezary Rojewski
Akihiko Odaki
Zheyu Ma
Lucas Tanure
Janusz Krzysztofik
YueHaibing
Vijendar Mukunda
Mario Limonciello
Christophe JAILLET
Lv Ruyi
Jiaxin Yu
Mauro Carvalho Chehab
YC Hung
Chao Song
Srinivas Kandagatla
Yu Liao
Zhen Ni
Ajye Huang
Ahmad Fatoum
Heiner Kallweit
James Schulman
Miaoqian Lin
Hui Wang
Xiaomeng Tong
Derek Fang
Rikard Falkeborn
Judy Hsiao
Takashi Iwai
Martin Povišer
Jaroslav Kysela
Trevor Wu
Amadeusz Sławiński
Sameer Pujar
tangmeng
Libin Yang
Linus Torvalds
Zheng Bin