[ Upstream commit 6fc5150438 ]
Explicitly convert unsigned int in the right of the conditional
expression to int to match the left side operand and the return type,
fixing the following compiler warning:
drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned
type in conditional expression [-Wsign-compare]
Fixes: c538f6ec9f ("dm crypt: add ability to use keys from the kernel key retention service")
Signed-off-by: Aashish Sharma <shraash@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0505a5a7 ]
DP audio enablement code which is comparing intf_type,
DRM_MODE_ENCODER_TMDS (= 2) with DRM_MODE_CONNECTOR_DisplayPort (= 10).
Which would never succeed. Fix it to check for DRM_MODE_ENCODER_TMDS.
Fixes: d13e36d7d2 ("drm/msm/dp: add audio support for Display Port on MSM")
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220217035358.465904-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb07af2ed2 ]
The dsi_7nm_phy_enable() disagrees with downstream for
glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update
programmed settings to match downstream driver. To remove the
possibility for such errors in future drop less_than_1500_mhz
assignment and specify settings explicitly.
Fixes: 5ac178381d ("drm/msm/dsi: support CPHY mode for 7nm pll/phy")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220217000837.435340-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3ee71bd8 ]
All DSI PHY/PLL drivers were referencing their VCO parent clock by a
global name, most of which don't exist or have been renamed. These
clock drivers seem to function fine without that except the 14nm driver
for sdm6xx [1].
At the same time all DTs provide a "ref" clock as per the requirements
of dsi-phy-common.yaml, but the clock is never used. This patchset puts
that clock to use without relying on a global clock name, so that all
dependencies are explicitly defined in DT (the firmware) in the end.
Note that this patch intentionally breaks older firmware (DT) that
relies on the clock to be found globally instead. The only affected
platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is
left in place to accommodate a more graceful transition period. All
other platforms had the "ref" clock added to their phy node since its
inception, or in a followup patch some time after. These patches
wrongly assumed that the "ref" clock was actively used and have hence
been listed as "Fixes:" below.
Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of
27MHz pxo clock, which has been addressed in [3].
It is expected that both [2] and [3] are applied to the tree well in
advance of this patch such that any actual breakage is extremely
unlikely, but might still occur if kernel upgrades are performed without
the DT to match. After some time the fallback for msm8974 can be
removed again as well.
[1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@somainline.org/
[2]: https://lore.kernel.org/linux-arm-msm/20210830175739.143401-1-marijn.suijten@somainline.org/
[3]: https://lore.kernel.org/linux-arm-msm/20210829203027.276143-2-marijn.suijten@somainline.org/
Fixes: 79e51645a1 ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
Fixes: 6969d1d9c6 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
Fixes: 0c0e72705a ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210911131922.387964-2-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4aca42253 ]
Some of DP link compliant test expects to return fail-safe mode
if prefer detailed timing mode can not be supported by mainlink's
lane and rate after link training. Therefore add fail-safe mode
into connector mode list as backup mode. This patch fixes test
case 4.2.2.1.
Changes in v2:
-- add Fixes text string
Fixes: 4b85d405cf ( "drm/msm/dp: reduce link rate if failed at link training 1")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1643066274-25814-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9051d629db ]
Each DP link training contains link training 1 followed by link
training 2. There is maximum of 5 retries of DP link training
before declared link training failed. It is required to stop link
training at end of link training 2 if it is failed so that next
link training 1 can start freshly. This patch fixes link compliance
test case 4.3.1.13 (Source Device Link Training EQ Fallback Test).
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 2e0adc765d ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e602f5156 ]
DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.
The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.
Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()
Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp
Changes in V4:
-- add more details to commit text
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 7948fe12d4 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1fe2ace2c ]
In devicetree the flash information is embedded within nand chip node,
so during nand chip initialization the nand chip node should be passed
to nand_set_flash_node() api, instead of nand controller node.
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220209053427.27676-1-amit.kumar-mahapatra@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c305c94bdc ]
Currently the error -EIO is being assinged to variable ret when
the READY_BIT is not set but the function iwlagn_mac_start returns
0 rather than ret. Fix this by returning ret instead of 0.
Addresses-Coverity: ("Unused value")
Fixes: 7335613ae2 ("iwlwifi: move all mac80211 related functions to one place")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210907104658.14706-1-colin.king@canonical.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce014c9861 ]
Due to preg protection we cannot write to this register
while FW is running (when FW in Halt it is ok).
since we have some cases that we need to dump this
region while FW is running remove this writing from DRV.
FW will do this writing.
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Fixes: 89639e06d0 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.209f3078bc74.I463530bd2f40daedb39f6d9df987bb7cee209033@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59e1221f47 ]
Since commit a05829a722 ("cfg80211: avoid holding the RTNL when
calling the driver") we're not only holding the RTNL when going
in and out of suspend, but also the wiphy->mtx. Add that to the
D3 test debugfs in iwlwifi since it's required for various calls
to mac80211.
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.fcec0204e162.Ib73bf787ab4d83581de20eb89b1f8dbfcaaad0e3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a265d1a61 ]
We may not have all the interfaces added to the driver when we get the
THERMAL_DUAL_CHAIN_REQUEST notification from the FW, so instead of
iterating all vifs to update SMPS, iterate only the ones that are
already assigned. The interfaces that were not assigned yet, will be
updated accordingly when we start using them.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: 2a7ce54ccc ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220129105618.9416aade2ba0.I0b71142f89e3f158aa058a1dfb2517c8c1fa3726@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30d17c12b0 ]
The recent fix for NULL sta in iwl_mvm_get_tx_rate() still has a call
of iwl_mvm_sta_from_mac80211() that may be called with NULL sta.
Although this practically only points to the address and the actual
access doesn't happen due to the conditional evaluation at a later
point, it looks a bit flaky.
This patch drops the temporary variable above and evaluates
iwm_mvm_sta_from_mac80211() directly for avoiding confusions.
Fixes: d599f714b7 ("iwlwifi: mvm: don't crash on invalid rate w/o STA")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220121114024.10454-1-tiwai@suse.de
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24720d7452 ]
This patch added the data checksum error mib counters check for the
script mptcp_connect.sh when the data checksum is enabled.
In do_transfer(), got the mib counters twice, before and after running
the mptcp_connect commands. The latter minus the former is the actual
number of the data checksum mib counter.
The output looks like this:
ns1 MPTCP -> ns2 (dead:beef:1::2:10007) MPTCP (duration 86ms) [ OK ]
ns1 MPTCP -> ns2 (10.0.2.1:10008 ) MPTCP (duration 66ms) [ FAIL ]
server got 1 data checksum error[s]
Fixes: 94d66ba1d8 ("selftests: mptcp: enable checksum in mptcp_connect.sh")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/255
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 748663c8cc ]
XRC INI QPs should be able to adjust their local ACK timeout.
Fixes: 2c1619edef ("IB/cma: Define option to set ack timeout and pack tos_set")
Link: https://lore.kernel.org/r/1644421175-31943-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Suggested-by: Avneesh Pant <avneesh.pant@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 128f8ed590 ]
[Why]
When display topology changed on DSC hub we add all crtcs with dsc support to
atomic state.
Refer to patch:"drm/amd/display: Trigger modesets on MST DSC connectors"
However the original implementation may skip crtc if the topology change
caused by unplug.
That potentially could lead to no-lightup or corruption on DSC hub after
unplug event on one of the connectors.
[How]
Update add_affected_mst_dsc_crtcs() to use old connector state
if new connector state has no crtc (undergoes modeset due to unplug)
Fixes: 44be939ff7 ("drm/amd/display: Trigger modesets on MST DSC connectors")
Reviewed-by: Hersen Wu <hersenwu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e610941c45 ]
[why]
pm sysfs should be writable in one VF mode as is in passthrough
[how]
do not remove write access on pm sysfs if device is in one VF mode
Fixes: 11c9cc95f8 ("amdgpu/pm: Make sysfs pm attributes as read-only for VFs")
Signed-off-by: Yiqing Yao <yiqing.yao@amd.com>
Reviewed-by: Monk Liu <Monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edc21dc909 ]
When reworking btf__get_from_id() in commit a19f93cfaf the error
handling when calling bpf_btf_get_fd_by_id() changed. Before the rework
if bpf_btf_get_fd_by_id() failed the error would not be propagated to
callers of btf__get_from_id(), after the rework it is. This lead to a
change in behavior in print_key_value() that now prints an error when
trying to lookup keys in maps with no btf available.
Fix this by following the way used in dumping maps to allow to look up
keys in no-btf maps, by which it decides whether and where to get the
btf info according to the btf value type.
Fixes: a19f93cfaf ("libbpf: Add internal helper to load BTF data by FD")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/1644249625-22479-1-git-send-email-yinjun.zhang@corigine.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5c6f647ae ]
The length of EDID block can be longer than 256 bytes, so we should use
`int` instead of `u8` for the `edid_pos` variable.
Fixes: 8bdfc5dae4 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210103827.402436-1-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fdbbfd509 ]
Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Fixes: 1c894225bf ("iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20220106024302.2574180-1-jiasheng@iscas.ac.cn
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5e5e03e94 ]
Internally kernel prepends all report buffers, for both numbered and
unnumbered reports, with report ID, therefore to properly handle unnumbered
reports we should prepend it ourselves.
For the same reason we should skip the first byte of the buffer when
calling i2c_hid_set_or_send_report() which then will take care of properly
formatting the transfer buffer based on its separate report ID argument
along with report payload.
[jkosina@suse.cz: finalize trimmed sentence in changelog as spotted by Benjamin]
Fixes: 9b5a9ae885 ("HID: i2c-hid: implement ll_driver transport-layer callbacks")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a4760463d ]
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: 8c0984e5a7 ("power: move power supply drivers to power/supply")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c3de619e1 ]
When receiving netlink messages, libbpf was using a statically allocated
stack buffer of 4k bytes. This happened to work fine on systems with a 4k
page size, but on systems with larger page sizes it can lead to truncated
messages. The user-visible impact of this was that libbpf would insist no
XDP program was attached to some interfaces because that bit of the netlink
message got chopped off.
Fix this by switching to a dynamically allocated buffer; we borrow the
approach from iproute2 of using recvmsg() with MSG_PEEK|MSG_TRUNC to get
the actual size of the pending message before receiving it, adjusting the
buffer as necessary. While we're at it, also add retries on interrupted
system calls around the recvmsg() call.
v2:
- Move peek logic to libbpf_netlink_recv(), don't double free on ENOMEM.
Fixes: 8bbb77b7c7 ("libbpf: Add various netlink helpers")
Reported-by: Zhiqian Guan <zhguan@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220211234819.612288-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1528038385 ]
When the dw-hdmi bridge is in first place of the bridge chain, this
means there is no way to select an input format of the dw-hdmi HW
component.
Since introduction of display-connector, negotiation was broken since
the dw-hdmi negotiation code only worked when the dw-hdmi bridge was
in last position of the bridge chain or behind another bridge also
supporting input & output format negotiation.
Commit 7cd70656d1 ("drm/bridge: display-connector: implement bus fmts callbacks")
was introduced to make negotiation work again by making display-connector
act as a pass-through concerning input & output format negotiation.
But in the case where the dw-hdmi is single in the bridge chain, for
example on Renesas SoCs, with the display-connector bridge the dw-hdmi
is no more single, breaking output format.
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Fixes: 6c3c719936 ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: add proper fixes commit]
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc37dc617f ]
On ppc64le architecture __s64 is long int and requires %ld. Cast to
ssize_t and use %zd to avoid architecture-specific specifiers.
Fixes: 4172843ed4 ("libbpf: Fix signedness bug in btf_dump_array_data()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220209063909.1268319-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3a723dbc9 ]
To replace the dma_map_single() stream DMA mapping with DMA coherent
method dma_alloc_coherent() which is more simple.
dma_map_single() found by Tim Gardner not proper. Suggested by Claudiu
Manoil and Jakub Kicinski to use dma_alloc_coherent(). Discussion at:
https://lore.kernel.org/netdev/AM9PR04MB8397F300DECD3C44D2EBD07796BD9@AM9PR04MB8397.eurprd04.prod.outlook.com/t/
Fixes: 888ae5a395 ("net: enetc: add tc flower psfp offload driver")
cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74b0fe8040 ]
In CXL 2.0, 8.2.5.1 CXL Capability Header Register: this register
is given as 32 bits.
8.2.3 which covers the CXL 2.0 Component registers, including the
CXL Capability Header Register states that access restrictions
specified in Section 8.2.2 apply.
8.2.2 includes:
* A 32 bit register shall be accessed as a 4 Byte quantity.
...
If these rules are not followed, the behavior is undefined.
Discovered during review of CXL QEMU emulation. Alex Bennée pointed
out there was a comment saying that 4 byte registers must be read
with a 4 byte read, but 8 byte reads were being emulated.
https://lore.kernel.org/qemu-devel/87bkzyd3c7.fsf@linaro.org/
Fixing that, led to this code failing. Whilst a given hardware
implementation 'might' work with an 8 byte read, it should not be relied
upon. The QEMU emulation v5 will return 0 and log the wrong access width.
The code moved, so one fixes tag for where this will directly apply and
also a reference to the earlier introduction of the code for backports.
Fixes: 0f06157e01 ("cxl/core: Move register mapping infrastructure")
Fixes: 08422378c4 ("cxl/pci: Add HDM decoder capabilities")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20220201153437.2873-1-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4172843ed4 ]
The btf__resolve_size() function returns negative error codes so
"elem_size" must be signed for the error handling to work.
Fixes: 920d16af9b ("libbpf: BTF dumper support for typed data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220208071552.GB10495@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1377cc37f ]
It's wrong to check the last packet by RXE_COMP_MASK because the flag is
to indicate if responder needs to generate a completion.
Fixes: 9fcd67d177 ("IB/rxe: increment msn only when completing a request")
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20211229034438.1854908-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 735f5ae49e ]
The emulated bridge returns incorrect value for PCI_EXP_RTSTA register
during readout in advk_pci_bridge_emul_pcie_conf_read() function: the
correct bit is BIT(16), but we are setting BIT(23), because the code
does
*value = (isr0 & PCIE_MSG_PM_PME_MASK) << 16
where
PCIE_MSG_PM_PME_MASK
is
BIT(7).
The code should probably have been something like
*value = (!!(isr0 & PCIE_MSG_PM_PME_MASK)) << 16,
but we are better of using an if() and using the proper macro for this
bit.
Link: https://lore.kernel.org/r/20220110015018.26359-15-kabel@kernel.org
Fixes: 8a3ebd8de3 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 805dfc18dd ]
In advk_pcie_handle_msi() it is expected that when bit i in the W1C
register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is
updated to contain the MSI number corresponding to index i.
Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG
always contains the number of the last received MSI, overall.
Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt
number. Since Aardvark already forbids more than 32 interrupts and uses
own allocated hwirq numbers, the msi_idx already corresponds to the
received MSI number.
Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org
Fixes: 8c39d71036 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e62ad74aa5 ]
On changing the RX ring parameters igb uses a hack to avoid a warning
when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just
clears the struct xdp_rxq_info content.
Instead, change this to unregister if we're already registered. Align
code to the igc code.
Fixes: 9cbc948b5a ("igb: add XDP support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69a6d06878 ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-4-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc7ee2e34b ]
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-3-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b205f58502 ]
Some resource should be released if an error occurs in
'bcm2835_i2c_probe()'.
Add an error handling path and the needed 'clk_disable_unprepare()' and
'clk_rate_exclusive_put()' calls.
While at it, rework the bottom of the function to use this newly added
error handling path and have an explicit and more standard "return 0;" at
the end of the normal path.
Fixes: bebff81fb8 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3b2f911ac ]
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 920a9fa27e ]
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.
Fixes: d9fe64e511 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8b309ce97 ]
Running with POSIXLY_CORRECT=1 in the environment the scripts/dtc build
fails, because pkg-config doesn't output anything when the flags come
after the arguments.
Fixes: 067c650c45 ("dtc: Use pkg-config to locate libyaml")
Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220131112028.7907-1-t@laumann.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f2c104448 ]
If we're limiting bandwidth for some reason such as regulatory
restrictions, then advertise that limitation just like we do
for VHT today, so the AP is aware we cannot use the higher BW
it might be using.
Fixes: 41cbb0f5a2 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 585d42bb57 ]
This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.
Fixes: f3a2cd326e ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfcbb76b0f ]
When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.
This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:
BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
timecounter_read+0xf/0x50
ptp_vclock_refresh+0x2c/0x50
? ptp_clock_release+0x40/0x40
ptp_aux_kworker+0x17/0x30
kthread_worker_fn+0x9b/0x240
? kthread_should_park+0x30/0x30
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Fixes: 73f37068d5 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aashish Sharma
Dmitry Baryshkov
Marijn Suijten
Kuogee Hsieh
Amit Kumar Mahapatra
Dan Carpenter
Colin Ian King
Rotem Saado
Johannes Berg
Luca Coelho
Takashi Iwai
Geliang Tang
Tong Zhang
Håkon Bugge
Andrii Nakryiko
Roman Li
Yiqing Yao
Yinjun Zhang
Pin-Yen Lin
Jiasheng Jiang
Dmitry Torokhov
Miaoqian Lin
Toke Høiland-Jørgensen
Neil Armstrong
Po Liu
Jonathan Cameron
Dan Williams
Xiao Yang
Pali Rohár
Corinna Vinschen
Mark Brown
Christophe JAILLET
Lad Prabhakar
Pavel Skripkin
Christophe Leroy
Thomas Bracht Laumann Jespersen
Ilan Peer
Tobias Waldekranz
Miroslav Lichvar
Lorenzo Bianconi