The default filter configuration was hard to read and included
some redundancy. This patch attempts to stream line configuration
and improve readability.
No change of functionality is included.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting the steps involved in the configuration of a tracer.
The first part is generic and can be reused for both sysFS and
Perf methods.
The second part pertains to the configuration of filters
themselves where the source of the information used to
configure the filters will vary depending on the access
methods.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements the required API needed to access
and retrieve range and start/stop filters from the perf core.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both ETMv3 and ETMv4 drivers are declaring an 'enum etm_addr_type',
creating reduncancy.
This patch removes the enumeration from the driver files and adds
it to a common header.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With this commit [1] address range filter information is now found
in the struct hw_perf_event::addr_filters. As such pass the event
itself to the coresight_source::enable/disable() functions so that
both event attribute and filter can be accessible for configuration.
[1] 'commit 375637bc52 ("perf/core: Introduce address range filtering")'
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ETM registers are classified into 2 categories: trace and management.
The core power domain contains most of the trace unit logic including
all(except TRCOSLAR and TRCOSLSR) the trace registers. The debug power
domain contains the external debugger interface including all management
registers.
This patch adds coresight unit specific function coresight_simple_func
which can be used for ETM trace registers by providing a ETM specific
read function which does smp cross call to ensure the trace core is
powered up before the register is accessed.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Coresight ETMv4 architecture provides a way to request to keep the
power to the trace unit. This might help to collect the traces without
the need to disable the CPU power management(entering/exiting deeper
idle states).
Trace PowerDown Control Register provides powerup request bit which when
set requests the system to retain power to the trace unit and emulate
the powerdown request.
Typically, a trace unit drives a signal to the power controller to
request that the trace unit core power domain is powered up. However,
if the trace unit and the CPU are in the same power domain then the
implementation might combine the trace unit power up status with a
signal from the CPU.
This patch requests to retain power to the trace unit when active and
to remove when inactive. Note this change will only request but the
behaviour depends on the implementation. However, it matches the
exact behaviour expected when the external debugger is connected with
respect to CPU power states.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each coresight device prepares a description for coresight_register()
in struct coresight_desc. Once we register the device, the description is
useless and can be freed. The coresight_desc is small enough (48bytes on
64bit)i to be allocated on the stack. Hence use an automatic variable to
avoid a needless dynamic allocation and wasting the memory(which will only
be free'd when the device is destroyed).
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is mandatory to enable a coresight block's power domain before
trying to access management registers. Otherwise the transaction
simply stalls, leading to a system hang.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Depending on when CoreSight device are discovered it is possible
that some IP block may be referencing devices that have not been
added to the bus yet. The end result is missing nodes in the
CoreSight topology even when the devices are present and properly
initialised.
This patch solves the problem by asking the driver core to
try initialising the device at a later time when the children
of a CoreSight node are missing.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we encounter a timeout waiting for a status change via
coresight_timeout, the caller always print the offset which
was tried. This is pretty much useless as it doesn't specify
the bit position we wait for. Also, one needs to lookup the
TRM to figure out, what was wrong. This patch changes all
such error messages to print something more meaningful.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the defined symbol rather than hardcoding the value to
check whether the TMC buffer is full.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleans up the peripheral id table for different ETMv4
implementations.
As per Cortex-A53 TRM, the ETM has following id values:
Peripheral ID0 0x5D 0xFE0
Peripheral ID1 0xB9 0xFE4
Peripheral ID2 0x4B 0xFE8
Peripheral ID3 0x00 0xFEC
where, PID2: has the following format:
[7:4] Revision
[3] JEDEC 0b1 res1. Indicates a JEP106 identity code is used
[2:0] DES_1 0b011 ARM Limited. This is bits[6:4] of JEP106 ID code
The existing table entry checks only the bits [1:0], which is not
sufficient enough. Fix it to match bits [3:0], just like the other
entries do. While at it, correct the comment for A57 and the A53 entry.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At present the ETF or ETR gives out the entire device
buffer, even if there is less or even no trace data
available. This patch limits the trace data given out to
the actual trace data collected.
Cc: mathieu.poirier@linaro.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a cleanup patch.
coresight_device->conns holds an array to point to the devices
connected to the OUT ports of a component. Sinks, e.g ETR, do not
have an OUT port (nr_outport = 0), as it streams the trace to
memory via AXI.
At coresight_register() we do :
conns = kcalloc(csdev->nr_outport, sizeof(*conns), GFP_KERNEL);
if (!conns) {
ret = -ENOMEM;
goto err_kzalloc_conns;
}
For ETR, since the total size requested for kcalloc is zero, the return
value is, ZERO_SIZE_PTR ( != NULL). Hence, csdev->conns = ZERO_SIZE_PTR
which cannot be verified later to contain a valid pointer. The code which
accesses the csdev->conns is bounded by the csdev->nr_outport check,
hence we don't try to dereference the ZERO_SIZE_PTR. This patch cleans
up the csdev->conns initialisation to make sure we initialise it
properly(i.e, either NULL or valid conns array).
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cleans up the error handling path for tmc_probe
as a side effect of the removal of the spurious dma_free_coherent().
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de5461970b ("coresight: tmc: allocating memory when needed")
removed the static allocation of buffer for the trace data in ETR mode in
tmc_probe. However it failed to remove the "devm_free_coherent" in
tmc_probe when the probe fails due to other reasons. This patch gets
rid of the incorrect dma_free_coherent() call.
Fixes: commit de5461970b ("coresight: tmc: allocating memory when needed")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
etm4_trace_id is not guaranteed to be executed on the CPU whose ETM is
being accessed. This leads to exception similar to below one if the
CPU whose ETM is being accessed is in deeper idle states. So it must
be executed on the CPU whose ETM is being accessed.
Unhandled fault: synchronous external abort (0x96000210) at 0xffff000008db4040
Internal error: : 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 5 PID: 5979 Comm: etm.sh Not tainted 4.7.0-rc3 #159
Hardware name: ARM Juno development board (r2) (DT)
task: ffff80096dd34b00 ti: ffff80096dfe4000 task.ti: ffff80096dfe4000
PC is at etm4_trace_id+0x5c/0x90
LR is at etm4_trace_id+0x3c/0x90
Call trace:
etm4_trace_id+0x5c/0x90
coresight_id_match+0x78/0xa8
bus_for_each_dev+0x60/0xa0
coresight_enable+0xc0/0x1b8
enable_source_store+0x3c/0x70
dev_attr_store+0x18/0x28
sysfs_kf_write+0x48/0x58
kernfs_fop_write+0x14c/0x1e0
__vfs_write+0x1c/0x100
vfs_write+0xa0/0x1b8
SyS_write+0x44/0xa0
el0_svc_naked+0x24/0x28
However, TRCTRACEIDR is not guaranteed to hold the previous programmed
trace id if it enters deeper idle states. Further, the trace id that is
computed in etm4_init_trace_id is programmed into TRCTRACEIDR only in
etm4_enable_hw which happens much later in the sequence after
coresight_id_match is executed from enable_source_store.
This patch simplifies etm4_trace_id by returning the stashed trace id
value similar to etm4_cpu_id.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CoreSight STM device allows direct mapping of the channel regions to
userspace for zero-copy writing. To support this ability, the STM
framework has provided a hook 'mmio_addr', this patch just implemented
this hook for CoreSight STM.
This patch also added an item into 'channel_space' to save the physical
base address of channel region which mmap operation needs to know.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the addition of the coresight devices get deferred, then there's a
window before child_name is populated by of_get_coresight_platform_data
from the respective component driver's probe and the attempted to access
the same from coresight_orphan_match resulting in kernel NULL pointer
dereference as below:
Unable to handle kernel NULL pointer dereference at virtual address 0x0
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1038 Comm: kworker/0:1 Not tainted 4.7.0-rc3 #124
Hardware name: ARM Juno development board (r2) (DT)
Workqueue: events amba_deferred_retry_func
PC is at strcmp+0x1c/0x160
LR is at coresight_orphan_match+0x7c/0xd0
Call trace:
strcmp+0x1c/0x160
bus_for_each_dev+0x60/0xa0
coresight_register+0x264/0x2e0
tmc_probe+0x130/0x310
amba_probe+0xd4/0x1c8
driver_probe_device+0x22c/0x418
__device_attach_driver+0xbc/0x158
bus_for_each_drv+0x58/0x98
__device_attach+0xc4/0x160
device_initial_probe+0x10/0x18
bus_probe_device+0x94/0xa0
device_add+0x344/0x580
amba_device_try_add+0x194/0x238
amba_deferred_retry_func+0x48/0xd0
process_one_work+0x118/0x378
worker_thread+0x48/0x498
kthread+0xd0/0xe8
ret_from_fork+0x10/0x40
This patch adds a check for non-NULL conn->child_name before accessing
the same.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull smp hotplug updates from Thomas Gleixner:
"This is the next part of the hotplug rework.
- Convert all notifiers with a priority assigned
- Convert all CPU_STARTING/DYING notifiers
The final removal of the STARTING/DYING infrastructure will happen
when the merge window closes.
Another 700 hundred line of unpenetrable maze gone :)"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
timers/core: Correct callback order during CPU hot plug
leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
powerpc/numa: Convert to hotplug state machine
arm/perf: Fix hotplug state machine conversion
irqchip/armada: Avoid unused function warnings
ARC/time: Convert to hotplug state machine
clocksource/atlas7: Convert to hotplug state machine
clocksource/armada-370-xp: Convert to hotplug state machine
clocksource/exynos_mct: Convert to hotplug state machine
clocksource/arm_global_timer: Convert to hotplug state machine
rcu: Convert rcutree to hotplug state machine
KVM/arm/arm64/vgic-new: Convert to hotplug state machine
smp/cfd: Convert core to hotplug state machine
x86/x2apic: Convert to CPU hotplug state machine
profile: Convert to hotplug state machine
timers/core: Convert to hotplug state machine
hrtimer: Convert to hotplug state machine
x86/tboot: Convert to hotplug state machine
arm64/armv8 deprecated: Convert to hotplug state machine
hwtracing/coresight-etm4x: Convert to hotplug state machine
...
This driver has an asymmetry of ONLINE code without any corresponding tear
down code. Otherwise, this is a straightforward conversion.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.228918408@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This driver has an asymmetry of ONLINE code without any corresponding tear
down code. Otherwise, this is a straightforward conversion.
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153337.147128995@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These are:
* a fix for a modprobe time deadlock
* a new PCI ID for Kaby Lake PCH-H
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iF4EABEIAAYFAleHZqwACgkQ68X2JGMFV/9W/gEArIrWWs+j6rVdEiill64T82PM
ErwKaVDHgYTQGNX9EHQA/Rfg4+zHlGu1OZhZDtt5u6lxayLHFhKyvCXhmbvVcYdf
=ah6j
-----END PGP SIGNATURE-----
Merge tag 'stm-for-greg-20160714' of git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next
Alexander writes:
intel_th: Fixes -t://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git
tags/stm-for-greg-20160714
stable
These are:
* a fix for a modprobe time deadlock
* a new PCI ID for Kaby Lake PCH-H
This adds Intel(R) Trace Hub PCI ID for Kaby Lake PCH-H.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: <stable@vger.kernel.org>
Driver initialization tries to request a hub (GTH) driver module from
its probe callback, resulting in a deadlock.
This patch solves the problem by adding a deferred work for requesting
the hub module.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: <stable@vger.kernel.org> # 4.4.x-
These are:
* runtime power management implementation for both intel_th and stm class
* semi-random kerneldoc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iF4EABEIAAYFAld2LXAACgkQ68X2JGMFV/8e3wD/UvdNiAGzXP0YqfE5nMmLZzxc
olSIFd2LEzZSx1kZ/nMA/i2c4nEGK2vI/l01Q27BuCWcwaKk7vpQWbluJN6fdf8y
=KnU5
-----END PGP SIGNATURE-----
Merge tag 'stm-for-greg-20160701' of git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-testing
Alexander writes:
stm class/intel_th: Updates for 4.8
These are:
* runtime power management implementation for both intel_th and stm class
* semi-random kerneldoc fixes
'output' type device callbacks are missing from the kerneldoc description
of the 'intel_th_driver' structure. Fix this.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
There's a kerneldoc comment that'd been derived from another one by way
of copying-and-pasting but hadn't been subsequently amended to reflect
the purpose of the function. Fix this.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Currently, an Intel TH (pci) device will be always active, because the
devices on the 'intel_th' bus don't implement runtime pm to track their
usage.
To address this, this patch adds runtime pm support to the 'intel_th'
bus and some additional bits for the hub. The 'output' type device is
in use while a capture is active; the 'source' type device (STH) relies
on its child stm class device for runtime pm tracking.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Currently, there's no runtime pm in stm class devices, which makes it
harder for the underlying hardware drivers to handle their power
management.
This patch applies the following runtime pm policy to stm class devices,
which their parents can rely on for their power management tracking:
* device is in use during character device writes,
* delayed autosuspend is used to keep it active between adjacent
writes,
* device is in use while mmio regions are mapped,
* device is is use while any stm_source devices are linked to it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Enabling a component via sysfs (echo 1 > enable_source), would
trigger building a path from the enabled sources to the sink.
If there is an error in the process (e.g, sink not enabled or
the device (CPU corresponding to ETM) is not online), we never report
failure, except for leaving a message in the dmesg.
Do proper error checking for the build path and return the error.
Before:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
$ echo 1 > /sys/devices/cs_etm/cpu2/enable_source
$ echo $?
0
After:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
$ echo 1 > /sys/devices/cs_etm/cpu2/enable_source
-bash: echo: write error: No such device or address
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the end of a trace collection, we try to clear the entire buffer
and enable the ETR back if it was already enabled. But, we would have
adjusted the drvdata->buf to point to the beginning of the trace data
in the trace buffer @drvdata->vaddr. So, the following code which
clears the buffer is dangerous and can cause crashes, like below :
memset(drvdata->buf, 0, drvdata->size);
Unable to handle kernel paging request at virtual address ffffff800a145000
pgd = ffffffc974726000
*pgd=00000009f3e91003, *pud=00000009f3e91003, *pmd=0000000000000000
PREEMPT SMP
Modules linked in:
CPU: 4 PID: 1692 Comm: dd Not tainted 4.7.0-rc2+ #1721
Hardware name: ARM Juno development board (r0) (DT)
task: ffffffc9734a0080 ti: ffffffc974460000 task.ti: ffffffc974460000
PC is at __memset+0x1ac/0x200
LR is at tmc_read_unprepare_etr+0x144/0x1bc
pc : [<ffffff80083a05ac>] lr : [<ffffff800859c984>] pstate: 200001c5
...
[<ffffff80083a05ac>] __memset+0x1ac/0x200
[<ffffff800859b2e4>] tmc_release+0x90/0x94
[<ffffff8008202f58>] __fput+0xa8/0x1ec
[<ffffff80082030f4>] ____fput+0xc/0x14
[<ffffff80080c3ef8>] task_work_run+0xb0/0xe4
[<ffffff8008088bf4>] do_notify_resume+0x64/0x6c
[<ffffff8008084d5c>] work_pending+0x10/0x14
Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428)
Since we clear the buffer anyway in the following call to
tmc_etr_enable_hw(), remove the erroneous memset().
Fixes: commit de5461970b ("coresight: tmc: allocating memory when needed")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the end of the trace capture, we free the allocated memory,
resetting the drvdata->buf to NULL, to indicate that trace data
was collected and the next trace session should allocate the
memory in tmc_enable_etr_sink_sysfs.
The tmc_enable_etr_sink_sysfs, we only allocate memory if drvdata->vaddr
is not NULL (which is not performed at the end of previous session).
This can cause, drvdata->vaddr getting assigned NULL and later we do
memset() which causes a crash as below :
Unable to handle kernel NULL pointer dereference at virtual
address 00000000
pgd = ffffffc9747f0000
[00000000] *pgd=00000009f402e003, *pud=00000009f402e003,
*pmd=0000000000000000
Internal error: Oops: 96000046 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1592 Comm: bash Not tainted 4.7.0-rc1+ #1712
Hardware name: ARM Juno development board (r0) (DT)
task: ffffffc078fe0080 ti: ffffffc974178000 task.ti: ffffffc974178000
PC is at __memset+0x1ac/0x200
LR is at tmc_enable_etr_sink+0xf8/0x304
pc : [<ffffff80083a002c>] lr : [<ffffff800859be44>] pstate: 400001c5
sp : ffffffc97417bc00
x29: ffffffc97417bc00 x28: ffffffc974178000
Call trace:
Exception stack(0xffffffc97417ba40 to 0xffffffc97417bb60)
ba40: 0000000000000001 ffffffc974a5d098 ffffffc97417bc00 ffffff80083a002c
ba60: ffffffc974a5d118 0000000000000000 0000000000000000 0000000000000000
ba80: 0000000000000001 0000000000000000 ffffff800859bdec 0000000000000040
baa0: ffffff8008b45b58 00000000000001c0 ffffffc97417baf0 ffffff80080eddb4
bac0: 0000000000000003 ffffffc078fe0080 ffffffc078fe0960 ffffffc078fe0940
bae0: 0000000000000000 0000000000000000 00000000007fffc0 0000000000000004
bb00: 0000000000000000 0000000000000040 000000000000003f 0000000000000000
bb20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001
bb40: ffffffc078fe0960 0000000000000018 ffffffffffffffff 0008669628000000
[<ffffff80083a002c>] __memset+0x1ac/0x200
[<ffffff8008599814>] coresight_enable_path+0xa8/0x1dc
[<ffffff8008599b10>] coresight_enable+0x88/0x1b8
[<ffffff8008599d88>] enable_source_store+0x3c/0x6c
[<ffffff800845eaf4>] dev_attr_store+0x18/0x28
[<ffffff80082829e8>] sysfs_kf_write+0x54/0x64
[<ffffff8008281c30>] kernfs_fop_write+0x148/0x1d8
[<ffffff8008200128>] __vfs_write+0x28/0x110
[<ffffff8008200e88>] vfs_write+0xa0/0x198
[<ffffff80082021b0>] SyS_write+0x44/0xa0
[<ffffff8008084e70>] el0_svc_naked+0x24/0x28
Code: 91010108 54ffff4a 8b040108 cb050042 (d50b7428)
This patch fixes the issue by clearing the drvdata->vaddr while we free
the allocated buffer at the end of a session, so that we allocate the
memory again.
Cc: mathieu.poirier@linaro.org
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_coresight_build_path assumes that all the connections of a csdev
has the child_dev initialised. This may not be true if the particular
component is not supported by the kernel config(e.g TPIU) but is
present in the DT. In which case, building a path can cause a crash like this :
Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = ffffffc9750dd000
[00000010] *pgd=00000009f5e90003, *pud=00000009f5e90003, *pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 1348 Comm: bash Not tainted 4.6.0-next-20160517 #1646
Hardware name: ARM Juno development board (r0) (DT)
task: ffffffc97517a280 ti: ffffffc9762c4000 task.ti: ffffffc9762c4000
PC is at _coresight_build_path+0x18/0xe4
LR is at _coresight_build_path+0xc0/0xe4
pc : [<ffffff80083d5130>] lr : [<ffffff80083d51d8>] pstate: 20000145
sp : ffffffc9762c7ba0
[<ffffff80083d5130>] _coresight_build_path+0x18/0xe4
[<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
[<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
[<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
[<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
[<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4
[<ffffff80083d5cdc>] coresight_build_path+0x40/0x68
[<ffffff80083d5e14>] coresight_enable+0x74/0x1bc
[<ffffff80083d60a0>] enable_source_store+0x3c/0x6c
[<ffffff800830b17c>] dev_attr_store+0x18/0x28
[<ffffff80081ca9c4>] sysfs_kf_write+0x40/0x50
[<ffffff80081c9e38>] kernfs_fop_write+0x140/0x1cc
[<ffffff8008163ec8>] __vfs_write+0x28/0x110
[<ffffff8008164bf0>] vfs_write+0xa0/0x174
[<ffffff8008165d18>] SyS_write+0x44/0xa0
[<ffffff8008084e70>] el0_svc_naked+0x24/0x28
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big char and misc driver update for 4.7-rc1.
Lots of different tiny driver subsystems have updates here with new
drivers and functionality. Details in the shortlog.
All have been in linux-next with no reported issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlc/0YYACgkQMUfUDdst+ynmtACeLpLLKZsy1v7WfkW92cLSOPBD
2C8AoLFPKoh55rlOJrNz3bW9ANAaOloX
=/nsL
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here's the big char and misc driver update for 4.7-rc1.
Lots of different tiny driver subsystems have updates here with new
drivers and functionality. Details in the shortlog.
All have been in linux-next with no reported issues for a while"
* tag 'char-misc-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (125 commits)
mcb: Delete num_cells variable which is not required
mcb: Fixed bar number assignment for the gdd
mcb: Replace ioremap and request_region with the devm version
mcb: Implement bus->dev.release callback
mcb: export bus information via sysfs
mcb: Correctly initialize the bus's device
mei: bus: call mei_cl_read_start under device lock
coresight: etb10: adjust read pointer only when needed
coresight: configuring ETF in FIFO mode when acting as link
coresight: tmc: implementing TMC-ETF AUX space API
coresight: moving struct cs_buffers to header file
coresight: tmc: keep track of memory width
coresight: tmc: make sysFS and Perf mode mutually exclusive
coresight: tmc: dump system memory content only when needed
coresight: tmc: adding mode of operation for link/sinks
coresight: tmc: getting rid of multiple read access
coresight: tmc: allocating memory when needed
coresight: tmc: making prepare/unprepare functions generic
coresight: tmc: splitting driver in ETB/ETF and ETR components
coresight: tmc: cleaning up header file
...
Many developers already know that field for reference count of the
struct page is _count and atomic type. They would try to handle it
directly and this could break the purpose of page reference count
tracepoint. To prevent direct _count modification, this patch rename it
to _refcount and add warning message on the code. After that, developer
who need to handle reference count will find that field should not be
accessed directly.
[akpm@linux-foundation.org: fix comments, per Vlastimil]
[akpm@linux-foundation.org: Documentation/vm/transhuge.txt too]
[sfr@canb.auug.org.au: sync ethernet driver changes]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Manish Chopra <manish.chopra@qlogic.com>
Cc: Yuval Mintz <yuval.mintz@qlogic.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The read pointer (read_ptr) needs to be adjusted only if its value
has gone beyond the length of the memory buffer.
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When part of a path but not identified as a sink, the EFT has to
be configured as a link and placed in HW FIFO mode. As such when
enabling a path, call the right configuration function based on
the role the ETF if playing in this trace run.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implement the AUX area interfaces required to
use the TMC (configured as an ETF) from the Perf sub-system.
The heuristic is heavily borrowed from the ETB10 implementation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That way we can re-use the structure in other drivers.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Accessing the HW configuration register each time the memory
width is needed simply doesn't make sense. It is much more
efficient to read the value once and keep a reference for
later use.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysFS and Perf access methods can't be allowed to interfere
with one another. As such introducing guards to access
functions that prevents moving forward if a TMC is already
being used.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling tmc_etf/etr_dump_hw() is required only when operating from
sysFS. When working from Perf, the system memory is harvested
from the AUX trace API.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving tmc_drvdata::enable to a local_t mode. That way the
sink interface is aware of it's orgin and the foundation for
mutual exclusion between the sysFS and Perf interface can be
laid out.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allowing multiple readers to access the trace data simultaniously
via sysFS provides no shortage of opportunity for race condition,
mandates two variable to be maintained (drvdata::read_count and
drvdata::reading), makes the code complex and provide little
advantages, if any.
This patch streamlines the read process by restricting trace data
access to a single user. That way drvdata::read_count can
be eliminated and race conditions (along with faulty error handling)
in function tmc_open() and tmc_release() eliminated.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In it's current form the TMC probe() function allocates
trace buffer memory at boot time, event if coresight isn't
used. This is highly inefficient since trace buffers can
occupy a lot of memory that could be used otherwised.
This patch allocates trace buffers on the fly, when the
coresight subsystem is solicited. Allocated buffers are
released when traces are read using the device descriptors
under /dev.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dealing with HW related matters in tmc_read_prepare/unprepare
becomes convoluted when many cases need to be handled distinctively.
As such moving processing related to HW setup to individual driver
files and keep the core driver generic.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TMC block can operate in 3 modes (ETB, ETF and ETR) and accessed
via two interfaces (sysFS and Perf). That makes 6 mode to cover, which
is way too much coupling for a single file.
This patch splits the original TMC driver in 2 halves, one for ETB/ETF
and another one for ETR mode. A common core is kept for functionality
common to all 3 modes.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch first move the TMC_STS_TMCREADY_BIT and
TMC_FFCR_FLUSHMAN_BIT defines to their respective section.
It also removes TMC_FFCR_FLUSHMAN, since the same result
can easily be obtained using the BIT() macro.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The amount of #define, enumeration and structure definition
is big enough to justify moving them to a new header file.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch makes the name of the define reflect the amount of
data tranfers per burst, in this case 16.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In their current implementation the tmc_read_prepare/unprepare()
are a lump of if/else that is difficult to read. This patch is
alleviating that by using a switch statement. The latter also
allows for a better control on the error path.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the TRM before programming the TMC in circular
buffer mode (and that for any configuration, ETB, ETR, ETF),
the TMCReady bit in the status register has to be set.
This patch adds a check to make sure the state machine is in
a state where it can be configured, and complains otherwise.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the TMC architectural state machine, the 'stopped'
state is reached when bit 2 (TMCReady) of the TMC Status register
turns to '1'. The code is correct but the naming convention isn't.
The 'Triggered' bit occupies position '1' of the TMC Status register
and has nothing to do with the indication of the TMC entering the
stopped state. As such renaming function "tmc_wait_for_triggered()"
and changing the #define to reflect what the code is really doing.
This patch has no effect other than clarifying the semantic.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding management registers that convey implementation
specific characteristics. Those are useful for trace
configuration and collection along with general trouble
shooting.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a cellID for the ETMv4 tracer found on
HiSillicon's A72 Maia processor.
Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch rectifies the amount of words to read when the internal
buffer is deemed bigger than the amount of space available in the
perf ring buffer.
The amount to read is set to the amount of space in the perf ring
buffer rather than being subtracted by it.
Reported-by: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver adds support for the STM CoreSight IP block, allowing any
system compoment (HW or SW) to log and aggregate messages via a
single entity.
The CoreSight STM exposes an application defined number of channels
called stimulus port. Configuration is done using entries in sysfs
and channels made available to userspace via configfs.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Michael Williams <michael.williams@arm.com>
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From a core framework point of view an STM device is a source that is
treated the same way as any other tracers. Unlike tracers though STM
devices are not associated with a CPU. As such it doesn't make sense
to associate the path from an STM device to its sink with a per-cpu
variable as it is done for tracers.
This patch simply adds another global variable to keep STM paths and the
processing in coresight_enable/disable() is updated to deal with STM
devices properly.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some STM devices adjust software assigned master numbers depending on
the trace source and its runtime state and whatnot. This patch adds
a sysfs attribute to inform the trace-side software that master numbers
assigned to software sources will not match those in the STP stream,
so that, for example, master/channel allocation policy can be adjusted
accordingly.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because this operation exceed the range of boolean,
so we should modify q_support to unit8 bit.
drvdata->q_support = BMVAL(etmidr0, 15, 16)
Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
activated and enable are already unsigned type,
no need to change them to unsigned.
Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com>
Signed-off-by: Li Zhong <lizhong11@hisilicon.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing boot time log for drivers that don't report useful information
other than they came up properly. The same information can be found in
sysFS once the system has booted and as such doesn't provide any value
in the boot log.
Reported-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysFS "status" entry conveys a wealth of information about
the status of the HW but goes agains the sysFS rule of one topic
per file.
This patch rectify the situation by adding read-only entries for
each of the field formaly displayed by "status". The ABI
documentation is kept up to date.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Macro "coresight_simple_func()" can be used by several drivers.
As such making the structure type generic and moving to a
globally available header file. That way individual drivers
can use the functionality by simply specifying the structure
they need to work with.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding a set of API allowing the Perf core to treat ETMv4
tracers like other PMUs.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding new mode to limit tracing to kernel or user space.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similarly to ETMv3, moving etmv4_drvdata::enable to an atomic
type that gives the 'mode' of a tracer and prevents multiple,
simultanious access by different subsystems.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As with the ETMv3.x driver, calling 'smp_call_function_single()'
twice in a row is highly ineffective. As such moving function
'etm4_os_unlock()' before the default initialisation takes
place, which results in the same outcome.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting and updating the default initialisation for each etmv4
configuration so that it can be called at the beginning of each
session rather than initialisation time only.
Since the trace ID isn't expected to change with every session,
moving it with the default tracer initialisation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to what was done on etm3x, splitting driver structure
etmv4_drvdata in two. One half is concerned with the HW
characteristics that are generally static in nature. The other
half deals with user configuration and will change from one
trace session to another.
No gain/loss of functionality is incurred from this patch.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding new sysFS management interface to query the configuration
and the traceid registers. Both are required to convey information
to the perf cmd line tools when using ETMv4 tracers as PMU.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As with the etm3x driver, sysFS entries are big enough to justify
their own file. As such moving all sysFS related declarations to
a dedicated location.
No gain/loss of functionality is incurred from this patch.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Broxton-M SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Do release the resources when msu subdevice gets removed: stop the
capture if it is active (which is still possible even though the
module in pinned) and free the capture buffers.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Right now it's possible to unload the msu driver while its character
device is open. Prevent it by setting fops::owner, which will result
in the module reference being held while the device node is open.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Right now it's possible to unload the output subdevice's driver while
the capture to this output is active. Prevent this by holding the
output driver's module reference.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
In order to guarantee that readers don't race with trace enabling,
both should happen under the same mutex. Having two mutexes seems
like an overkill, considering that because of the above, they'll
have to be acquired together, around trace enabling and char device
opening.
This patch makes both buffer accesses and readers serialize on
msc::buf_mutex and makes sure that 'enabled' flag accesses are also
serialized on it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
If output subdevice driver is not loaded, activating it will try to
call its ->activate method and crash. Fix this by explicitly checking
for the driver.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
The core intel_th driver allows subdevices to bring in their sysfs
attributes. Use this instead of taking care of them in probe and
remove.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
The core intel_th driver allows subdevices to bring in their sysfs
attributes. Use this instead of taking care of them in probe and
remove.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Some subdevices (MSU, PTI) need to register their own driver-specific
attribute groups. Provide a way for those to pass their attribute
groups to the core driver in their driver structure so that the
core can take care of creating and removing them.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Currently, the nr_pages attribute store does not check if kstrndup()
succeeded. Fix this.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Right now, the PTI output driver forgets to clean up its sysfs group
when it gets removed. Fix this.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Readability: a postfix increment is used on a pointer which is not
used anywhere afterwards, which may send the reader looking through
the function one extra time. Drop the unnecessary increment.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Currently, stm_register_device() makes the device visible and then
proceeds to initializing spinlocks and other properties, which leaves
a window when the device can already be opened but is not yet fully
operational.
Fix this by reversing the initialization order.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Currently, the error path of stm_register_device() forgets to unregister
the chrdev. Fix this.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
No point in explicitly setting something to zero right after we
explicitly checked that it is zero. Fix this.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Changing nr_devs after the module has been loaded doesn't actually
change anything, so just make it read-only.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Changing nr_dummies after the module has been loaded doesn't actually
change anything, so just make it read-only.
Reported-by: Alan Cox <alan.cox@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Master IDs are of unsigned int type, yet in the configfs policy code
we're validating user's input against INT_MAX. This is both pointless
and misleading as the real limits are imposed by the stm device's
[sw_start..sw_end] (which are also limited by the spec to be no larger
than 2^16-1).
Clean this up by getting rid of the redundant comparisons.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
In commit 941943cf51 ("drivers/hwtracing:
make coresight-* explicitly non-modular") we removed all uses of
modular functions/macros in favour of their built-in equivlents in
this subsystem.
However that commit and commit 0bcbf2e30f
("coresight: etm-perf: new PMU driver for ETM tracers") were in flight
at the same time, and hence one new non-modular user of module_init
crept back in. Fix it up like we did all the others.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
None of the Kconfig currently controlling compilation of any of
the files here are tristate, meaning that none of it currently
is being built as a module by anyone.
We need not be concerned about .remove functions and blocking the
unbind sysfs operations, since that was already done in a recent
commit.
Lets remove any remaining modular references, so that when reading the
drivers there is no doubt they are builtin-only.
All drivers get mostly the same changes, so they are handled in batch.
Changes are (1) convert to builtin_amba_driver, (2) delete module.h
include where unused, and (3) relocate the description into the
comments so we don't need MODULE_DESCRIPTION and associated tags.
The etm3x and etm4x use module_param_named, and have been adjusted
to just include moduleparam.h for that purpose.
In commit f309d44431 ("platform_device:
better support builtin boilerplate avoidance") we introduced the
builtin_driver macro.
Here we use that support and extend it to amba driver registration,
so where a driver is clearly non-modular and builtin-only, we can
update with the simple mapping of
module_amba_driver(...) ---> builtin_amba_driver(...)
Since module_amba_driver() uses the same init level priority as
builtin_amba_driver() the init ordering remains unchanged with
this commit.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TraceID values have to be unique for all tracers and
consistent between drivers and user space. As such
introducing a central function to be used whenever a
traceID value is required.
The patch also account for data traceIDs, which are usually
I(N) + 1.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perf is a well known and used tool for performance monitoring
and much more. A such it is an ideal candidate for integration
with coresight based HW tracing.
This patch introduces a PMU that represent a coresight tracer to
the Perf core.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding an ETB10 specific AUX area operations to be used
by the perf framework when events are initialised.
Part of this operation involves modeling the mmap'ed area
based on the specific ways a sink buffer gathers information.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding an operation mode to the sink->enable() API in order
to prevent simultaneous access from different callers.
TPIU and TMC won't be supplemented with the AUX area
API immediately and as such ignore the new mode.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving to use local atomic operations to take advantage of the
lockless implementation, something that will come handy when
the ETB is accessed from the Perf subsystem. Also changing the
name of the variable to something more meaningful.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That way traces can be enabled and disabled automatically
from the Perf subystem using the PMU abstraction.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding new mode to limit tracing to kernel or user space.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is really no point in having two functions to take care
of doing the initial tracer configuration. As such moving
everything to 'etm_set_default()'.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changing default configuration to include the entire address
range rather than just the kernel. That way traces are more
inclusive and it is easier to narrow down if needed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to use the event enable's "always false" event to
stop trace collection. For that purpose setting the programming bit
(ETMCR:10) is enough.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding a new mode to source API enable() in order to
distinguish where the request comes from. That way it is
possible to perform different operations based on where
the request was issued from.
The ETM4x driver is also modified to keep in sync with the
new interface.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting "etm_drvdata" in two sections, one for the HW specific
data and another for user configuration.
That way it is easier to manipulate and zero out the configuration
data when more than one concurrent tracing session configuration
is active.
Also taking care of up-lifting all the code affected by this new
arrangement. No loss or gain of functionality (other than what is
mentioned above) is introduced by this patch.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling function 'smp_call_function_single()' to unlock a
tracer and calling it again right after to perform the
default initialisation doesn't make sense.
Moving 'etm_os_unlock()' just before making the default
initialisation results in the same outcome while saving
one call to 'smp_call_function_single()'.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SysFS entries are big enough to justify their own file.
As such moving all sysFS related declarations to a dedicated
location.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving functions etm_readl/writel to file "coresight-etm.h"
so that the main ETM3x driver can be split in more than one
file.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving PM runtime operations in Coresight devices enable() and
disable() API to the framework core when a path is setup. That
way the runtime core doesn't have to be involved everytime a
path is enabled. It also avoids calling runtime PM operations
in IRQ context.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add an API allowing external code to quickly get a handle on the
sink within a path. The sink is always last, but adding an API allows
to keep the path's node structure private and remove redundant checks.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the Coresight framework from the sysFS interface a
tracer is always handling a single session and as such, a path
can be associated with a tracer. But when supporting multiple
session per tracer there is no guarantee that sessions will always
have the same path from source to sink.
This patch is removing the automatic association between path and
tracers. The building of a path and enablement of the components
in the path are decoupled, allowing for the association of a path
with a session rather than a tracer.
To keep backward functionality with the current sysFS access methods
a per-cpu place holder is used to keep a handle on the path built when
tracers are enabled. Lastly APIs to build paths and enable tracers are
made public so that other subsystem can interact with the Coresight
framework.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dma_alloc_coherent return an "void *" not an "void __iomen *".
It uses the wrong parameters when calls dma_free_coherent function.
The sparse tool output logs as the following:
coresight-tmc.c:199:23: expected void *<noident>
coresight-tmc.c:199:23: got void [noderef] <asn:2>*vaddr
coresight-tmc.c:336:30: warning: incorrect type in assignment
(different address spaces)
coresight-tmc.c:336:30: expected char *buf
coresight-tmc.c:336:30: got void [noderef] <asn:2>*
coresight-tmc.c:769:50: warning: incorrect type in argument 4
(different base types)
coresight-tmc.c:769:50: expected unsigned long long
[unsigned] [usertype] dma_handle
coresight-tmc.c:769:50: got restricted gfp_t
Signed-off-by: Eric Long <eric.long@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"DEVICE_ATTR_RO(name)" should be defined as static. And
there is an unnecessary space at the front of the code.
The sparse tool output logs as the following:
coresight-etm4x.c:2224:1: warning: symbol 'dev_attr_trcoslsr' was
not declared. Should it be static?
coresight-etm4x.c:2225:1: warning: symbol 'dev_attr_trcpdcr' was
not declared. Should it be static?
coresight-etm4x.c:2226:1: warning: symbol 'dev_attr_trcpdsr' was
not declared. Should it be static?
And the smatch tool output logs as the following:
of_coresight.c:89 of_coresight_alloc_memory() warn:
inconsistent indenting
Signed-off-by: Eric Long <eric.long@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM device's link callback has the power to abort master/channel
assignment by returning a negative error code. Use this in dummy
stm device to optionally abort assigning certain channel IDs.
This is useful as fault injection into the stm class core, for
testing purposes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM device's unlink callback is never actually called from anywhere in
the stm class code.
This patch adds calls to stm driver's unlink method after the unlinking
has succeeded.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a window in stm_source_link_drop(), during which the source's
link may change before locks are acquired. When this happens, it throws
a warning, since this is not an expected scenario.
This patch handles the race in such a way that if the link appears to
have changed by the time we took the locks, it will release them and
repeat the whole unlinking procedure from the beginning, unless the
other contender beat us to it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM code takes references to the stm device and its module for the
duration of the character device's existence or the stm_source link.
Dropping these references is not well balanced everywhere, which may
lead to leaks.
This patch balances the acquisition and releasing of these two
references and annotates each site so that it's easier to verify
correctness by reading the code.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible to concurrently assign the same output (a character
device writer or an stm_source device) to different stm devices,
which sets off a strategically placed warning in stm_output_assign().
To avoid this, use a spinlock to serialize (un)assignments between
outputs and stm devices.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an illegal attempt is made to unlink stm source device from an
stm device, the stm device's link spinlock mistakenly remains locked.
While this really shouldn't happen (there's a warning in place), the
locking should remain in order so that we can still recover from this
situation if it indeed does happen.
This patch unifies the unlocking in the exit path of
__stm_source_link_drop() to fix this.
Reported-by: Laurent Fert <laurent.fert@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heartbeat stm source may have multiple instances (for connecting to
different stm devices). Each instance will send a periodic test message
over its stm device when it is linked. This can be used for testing stm
class framework, stm device drivers or as a heartbeat over the stm link.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM framework should be able to handle multiple STM devices at a time,
each one with its own master allocation policy.
This patch changes dummy_stm driver to create multiple STM sinks to
help testing the framework.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By convention, the name of the stm policy directory in configfs consists of
the device name to which it applies and the actual policy name, separated
by a dot. Now, some devices already have dots in their names that separate
name of the actual device from its instance identifier. Such devices will
result in two (or more, who can tell) dots in the policy directory name.
Existing policy code, however, will treat the first dot as the one that
separates device name from policy name, therefore failing the above case.
This patch makes the last dot in the directory name be the separator, thus
prohibiting dots from being used in policy names.
Suggested-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM drivers provide a callback to generate/send individual STP packets;
it also tells the stm core how many bytes of payload it has consumed.
However, we would also need to use the negative space of this return
value to communicate errors that occur during the packet generation,
in which case the stm core will have to take appropriate action.
For now, we need to account for the possibility that the stm driver may
not support certain combinations of packet type/flags, in which case
it is expected to signal an error.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of the intel_th core supports multiple co-existing TH devices,
except for output device nodes, where intel_th device id is hardcoded
to be zero.
Fix this by fetching the actual intel_th device id from the parent
device's drvdata.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Already during the subdevice initialization time, devices will need
to reference Intel TH controller descriptor structure.
This patch moves setting the drvdata from the pci glue to intel_th
core, before subdevices are populated.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the stm class interface, the packet callback should return
an error if it is asked to generate packets that it doesn't support.
When it succeeds, it should return number of bytes consumed from its
payload. Currently, for FLAG packet it mistakenly returns 1.
This patch addresses these issues.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, reading from msc character device will leak its's user count
on read error.
This patch makes sure resources are released when there is no data left
to read from the buffer.
Signed-off-by: Laurent FERT <laurent.fert@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix offset for the second pass on the wrapped block when iterating over
memory in multi-block mode, otherwise wrong part of the block will get
copied.
Signed-off-by: Laurent FERT <laurent.fert@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel TH implements a scratchpad register to indicate to the firmware
and external debuggers what trace configuration is enabled so that
everybody plays nicely together. The register is a bit field and the
bit assignment convention is described in the developer's manual.
This patch enables the driver to automatically set scratchpad register
bits according to the output configuration that's enabled.
Based on work by Yann Fouassier.
Signed-off-by: Yann Fouassier <yann.fouassier@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a commented-out function in the GTH driver that's a leftover
from previous versions of the driver, where we tried to inherit the
pre-existing configuration, which didn't prove to be a sound idea.
This patch removes the function. No functional changes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver requires io memory to operate, so don't even consider it
for NO_IOMEM architectures.
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device unregister path uses wrong master index range when it tries
to free the allocated masters, it should, as does the rest of the stm
class code, use real master IDs.
This patch fixes the device unregister path to use real master IDs to
avoid memory leaks after unloading the stm driver.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
[alexander.shishkin@intel.com: re-wrote the commit message]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return type "unsigned int" was used by the stm_find_master_chan function
despite of the aspect that it will eventually return a negative error code.
Done with the help of Coccinelle.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Broxton SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Apollo Lake SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the character device write method allocates a temporary buffer
for user's data, but the user's data size is not sanitized and can cause
arbitrarily large allocations via kzalloc() or an integer overflow that
will then result in overwriting kernel memory.
This patch trims the input buffer size to avoid these issues.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since both sw_start and sw_end are master indices, the size of array
that holds them is sw_end - sw_start + 1, which the current code gets
wrong, allocating one item less than required.
This patch corrects the allocation size, avoiding potential slab
corruption.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
[alexander.shishkin@linux.intel.com: re-wrote the commit message]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the list of stm_sources linked to an stm device is protected by
a spinlock, which also means that sources' .unlink() method is called under
this spinlock. However, this method may (and does) sleep, which means
trouble.
This patch slightly reworks locking around stm::link_list so that bits that
might_sleep() are called with a mutex held instead. Modification of this
list requires both mutex and spinlock to be held, while looking at the list
can be done under either mutex or spinlock.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Right now, if stm device removal has to unbind from a policy (that is,
an stm device that has STP policy, gets removed), it will trigger a
nested lock on the stm device's policy mutex.
This patch fixes the problem by moving the locking from the policy
unbinding to policy removal (configfs path), where it's actually needed;
the other caller of the policy unbinding function already takes the
mutex around the call.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newly added STM code uses SRCU, but does not ensure that
this code is part of the kernel:
drivers/built-in.o: In function `stm_source_link_show':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `stm_source_link_drop':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
This adds a Kconfig 'select' statement like all the other SRCU using
drivers have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7bd1d4093c ("stm class: Introduce an abstraction for System Trace Module devices")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If STM=n, it doesn't make sense to ask about STM_DUMMY and
STM_SOURCE_CONSOLE support, which are not even built when enabled
anyway. Hence hide these options if STM=n.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Other than plainly parsing the device tree there is no way to
know which CPU a tracer is affined to. As such adding an
interface to lookup the CPU field enclosed in the etm_drvdata
structure that was initialised at boot time.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coresight drivers have absolutely no control over bind and unbind
operations triggered from sysfs. The operations simply can't be
cancelled or denied event when one or several tracing sessions are
under way. Since the memory associated to individual device is
invariably freed, the end result is a kernel crash when the path from
source to sink is travelled again as demonstrated here[1].
One solution could be to keep track of all the path (i.e tracing
session) that get created and iterate through the elements of those path
looking for the coresight device that is being removed. This proposition
doesn't scale well since there is no upper bound on the amount of
concurrent trace session that can be created.
With the above in mind, this patch prevent devices from being unbounded
from their driver by using the driver->suppress_bind_attr option. That way
trace sessions can be managed without fearing to loose devices.
Since device can't be removed anymore the xyz_remove() functions found in
each driver is also removed.
[1]. http://www.spinics.net/lists/arm-kernel/msg474952.html
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function 'coresight_unregister()', all references to the csdev that
is being taken away need to be removed from the topology. Otherwise
building the next coresight path from source to sink may use memory
that has been released.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference count taken by function bus_find_device() needs
to be released if a child device is found, something this patch
is adding.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In its current form the code never frees csdev->refcnt allocated
in coresight_register(). There is also a problem with csdev->conns
that is freed before device_unregister() rather than in the device
release function.
This patch addresses both issues by moving kfree(csdev->conns) to
coresight_device_release() and freeing csdev->refcnt, also in
the same function.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Connection child names associated to ports can sometimes be NULL,
which is the case when booting a system on QEMU or when the Coresight
power domain isn't switched on.
This patch is adding a check to make sure a NULL string isn't fed
to strcmp(), something that avoid crashing the system.
Cc: <stable@vger.kernel.org> # v3.18+
Reported-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull SCSI target updates from Nicholas Bellinger:
"This series contains HCH's changes to absorb configfs attribute
->show() + ->store() function pointer usage from it's original
tree-wide consumers, into common configfs code.
It includes usb-gadget, target w/ drivers, netconsole and ocfs2
changes to realize the improved simplicity, that now renders the
original include/target/configfs_macros.h CPP magic for fabric drivers
and others, unnecessary and obsolete.
And with common code in place, new configfs attributes can be added
easier than ever before.
Note, there are further improvements in-flight from other folks for
v4.5 code in configfs land, plus number of target fixes for post -rc1
code"
In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").
This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull. As Alexander says about
that patch:
"There's no need to keep an extra wrapper structure per item and the
awkward show_attribute/store_attribute item ops are no longer needed.
This patch converts policy code to the new api, all the while making
the code quite a bit smaller and easier on the eyes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"
That patch was folded into the merge so that the tree should be fully
bisectable.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
configfs: remove old API
ocfs2/cluster: use per-attribute show and store methods
ocfs2/cluster: move locking into attribute store methods
netconsole: use per-attribute show and store methods
target: use per-attribute show and store methods
spear13xx_pcie_gadget: use per-attribute show and store methods
dlm: use per-attribute show and store methods
usb-gadget/f_serial: use per-attribute show and store methods
usb-gadget/f_phonet: use per-attribute show and store methods
usb-gadget/f_obex: use per-attribute show and store methods
usb-gadget/f_uac2: use per-attribute show and store methods
usb-gadget/f_uac1: use per-attribute show and store methods
usb-gadget/f_mass_storage: use per-attribute show and store methods
usb-gadget/f_sourcesink: use per-attribute show and store methods
usb-gadget/f_printer: use per-attribute show and store methods
usb-gadget/f_midi: use per-attribute show and store methods
usb-gadget/f_loopback: use per-attribute show and store methods
usb-gadget/ether: use per-attribute show and store methods
usb-gadget/f_acm: use per-attribute show and store methods
usb-gadget/f_hid: use per-attribute show and store methods
...
devm_ioremap() returns NULL on error, it doesn't return an ERR_PTR,
which is what the current code does. This patch corrects these
checks.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
STM policy handling is basically configfs, I honestly don't know how we
ended up without a Kconfig dependency, but thanks to randconfig testing,
it's now caught.
Reported-by: Jim Davis <jim.epost@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use unsigned long in place of size_t to operate on buffer sizes and
offsets to clean up the 32 bit build.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Source device's link is protected with srcu, mark it as such to have
proper build-time validation of accesses to this field. The update
side that's dereferencing it under an update lock also needs an
accessor to dereference this field to keep sparse happy.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By adding the function name at the beginning of the error
message there is no doubt as to where the failing condition
occurred.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SysFS rules stipulate that only one value can be conveyed per
file. As such splitting the "status" interface in individual files.
This is also useful for user space applications - that way they can
probe each file individually rather than having to parse a list of entries.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without access to the device tree, it is impossible to know
what CPU a tracer is affined to. As such adding a new sysFS
interface to convey the information.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add comment to function coresight_enable_path() to make
sure there is no misunderstanding about what the code does.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. TRCRSCTLRn - Resource Selection Control Registers n=0~1 are reserved,
we shouldn't access them.
2. The max number of 'n' here is defined in TRCIDR4.NUMRSPAIR whoes value
indicates the number of resource selection *pairs*, and 0 indicates
one resource selection pair, 1 indicates two pairs, and so on ...
So, the total number of resource selection control registers which we can
access is (TRCIDR4.NUMRSPAIR * 2)
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parallel Trace Interface (PTI) unit is a trace output device that sends
data over a PTI port.
The driver provides interfaces to configure bus width, bus clock divider
and mode. Tracing is enabled via output device's "active" attribute.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory Storage Unit (MSU) is a trace output device that collects trace
data to system memory. It consists of 2 independent Memory Storage
Controllers (MSCs).
This driver provides userspace interfaces to configure in-memory tracing
parameters, such as contiguous (high-order allocation) buffer or multiblock
(scatter list) buffer mode, wrapping (data overwrite) and number and sizes
of windows in multiblock mode. Userspace can read the buffers via mmap()ing
or read()ing of the corresponding device node.
Signed-off-by: Laurent Fert <laurent.fert@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Software Trace Hub (STH) is a trace source device in the Intel TH
architecture, it generates data that then goes through the switch into
one or several output ports.
STH collects data from software sources using the stm device class
abstraction.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Global Trace Hub (GTH) is the central component of Intel TH architecture;
it carries out switching between the trace sources and trace outputs, can
enable/disable tracing, perform STP encoding, internal buffering, control
backpressure from outputs to sources and so on.
This property is also reflected in the software model; GTH (switch) driver
is required for the other subdevices to probe, because it matches trace
output devices against its output ports and configures them accordingly.
It also implements an interface for output ports to request trace enabling
or disabling and a few other useful things.
For userspace, it provides an attribute group "masters", which allows
configuration of per-master trace output destinations for up to master 255
and "256+" meaning "masters 256 and above". It also provides an attribute
group to discover and configure some of the parameters of its output ports,
called "outputs". Via these the user can set up data retention policy for
an individual output port or check if it is in reset state.
Signed-off-by: Laurent Fert <laurent.fert@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds basic support for PCI-based Intel TH devices. It requests
2 bars (configuration registers for the subdevices and STH channel MMIO
region) and calls into Intel TH core code to create the bus with subdevices
etc.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that
produce, switch and output trace data from multiple hardware and
software sources over several types of trace output ports encoded
in System Trace Protocol (MIPI STPv2) and is intended to perform
full system debugging.
For these subdevices, we create a bus, where they can be discovered
and configured by userspace software.
This patch creates this bus infrastructure, three types of devices
(source, output, switch), resource allocation, some callback mechanisms
to facilitate communication between the subdevices' drivers and some
common sysfs attributes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a simple stm_source class device driver (kernelspace stm trace
source) that registers a console and sends kernel messages over STM
devices.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a simple module that pretends to be an stm device and discards
all the data that comes in. Useful for testing stm class and its users.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A System Trace Module (STM) is a device exporting data in System Trace
Protocol (STP) format as defined by MIPI STP standards. Examples of such
devices are Intel(R) Trace Hub and Coresight STM.
This abstraction provides a unified interface for software trace sources
to send their data over an STM device to a debug host. In order to do
that, such a trace source needs to be assigned a pair of master/channel
identifiers that all the data from this source will be tagged with. The
STP decoder on the debug host side will use these master/channel tags to
distinguish different trace streams from one another inside one STP
stream.
This abstraction provides a configfs-based policy management mechanism
for dynamic allocation of these master/channel pairs based on trace
source-supplied string identifier. It has the flexibility of being
defined at runtime and at the same time (provided that the policy
definition is aligned with the decoding end) consistency.
For userspace trace sources, this abstraction provides write()-based and
mmap()-based (if the underlying stm device allows this) output mechanism.
For kernel-side trace sources, we provide "stm_source" device class that
can be connected to an stm device at run time.
Cc: linux-api@vger.kernel.org
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like ETTv3, ETMv4 also needs the similar modifications to support Context
ID tracing when PID namespace is enabled.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Coresight ETM drivers already support context-ID tracing, but it won't
work when PID namespace is enabled. This is because when using PID
namespace a process id (ie. VPID) seen from the current namespace differs
from the id (ie. PID) seen by kernel.
So when users write the process id seen by themselves to ETM, there needs
to be a translation from VPID to PID, as such ETM drivers will write the
PID into the Context ID register correctly.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ctxid_val' array was used to store the value of ETM context ID comparator
which actually stores the process ID to be traced, so using 'ctxid_pid' as
its name instead make it easier to understand.
This patch also changes the ABI, it is normally not allowed, but
fortunately it is a testing ABI and very new for now. Nevertheless,
if you don't think it should be changed, we could always add an alias
for userspace.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ctxid_val' array was used to store the value of ETM context ID comparator
which actually stores the process ID to be traced, so using 'ctxid_pid' as
its name instead make it easier to understand.
This patch also changes the ABI, it is normally not allowed, but
fortunately it is a testing ABI and very new for now. Nevertheless,
if you don't think it should be changed, we could always add an alias
for userspace.
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Macro builtin_platform_driver can be used for builtin drivers
that don't do anything in driver init. This file depends on
Kconfig CONFIG_CORESIGHT_LINKS_AND_SINKS which eventually
depends on CORESIGHT. Both CONFIG_CORESIGHT_LINKS_AND_SINKS and
CORESIGHT are bool. So, use builtin_platform_driver and remove
some boilerplate code.
Also, remove header file init.h as functionality like module_init
and module_exit is now relocated to module.h.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Suggested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Qualcomm's PTM v1.1 peripheral ID to supported devices.
This device could be found at least in MSM8974 and APQ8064
chipsets.
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 2e1cdfe184 ("coresight-etm4x:
Adding CoreSight ETM4x driver") this driver was added.
It uses module_amba_driver() to register itself with the system,
which is just an alias for module_driver. This currently works by
relying on getting that via init.h but we are planning to move that
code[1] to module.h -- at which time this will fail to compile since
it does not include module.h currently, resulting in:
drivers/hwtracing/coresight/coresight-etm4x.c:2701:1: note: in expansion of macro ‘module_amba_driver’
module_amba_driver(etm4x_driver);
^
include/linux/device.h:1296:1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int]
module_init(__driver##_init); \
^
In the future, the amba support may want to create another alias that
uses builtin_driver[2] for cases like this which are using bool Kconfig
triggers, but for now we just fix the implicit include.
[1] https://lkml.kernel.org/r/1433276168-21550-1-git-send-email-paul.gortmaker@windriver.com
[2] https://lkml.kernel.org/r/1431287385-1526-1-git-send-email-paul.gortmaker@windriver.com
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 620cf787c1 ("coresight: replicator:
Add Qualcomm CoreSight Replicator driver") this driver was added.
It uses module_amba_driver(replicator_driver) to register itself with
the system -- which is just an alias for module_driver. This currently
works by relying on getting that via init.h but we are planning to move
that code[1] to module.h -- at which time this will fail to compile since
it does not include module.h currently, resulting in:
drivers/hwtracing/coresight/coresight-replicator-qcom.c:214:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
drivers/hwtracing/coresight/coresight-replicator-qcom.c:214:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
In the future, the amba support may want to create another alias that
uses builtin_driver[2] for cases like this which are using bool Kconfig
triggers, but for now we just fix the implicit include.
[1] https://lkml.kernel.org/r/1433276168-21550-1-git-send-email-paul.gortmaker@windriver.com
[2] https://lkml.kernel.org/r/1431287385-1526-1-git-send-email-paul.gortmaker@windriver.com
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver manages Qualcomm CoreSight Replicator device, which
resides on the AMBA bus. Replicator has been made programmable to
allow software to turn of the replicator branch to sink that is not
being used. This avoids trace traffic to the unused/non-current sink
from causing back pressure that results in overflows at the source.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As can be seen from the datasheet of the CoreSight
Components, DDI0314 table A-4 the funnel has a clock signal
apart from the AHB interconnect ("amba_pclk", that we're
already handling) called ATCLK, ARM Trace Clock, that SoC
implementers may provide from an entirely different clock
source. So to model this correctly create an optional
path for handling ATCLK alongside the PCLK so we don't
break old platforms that only define PCLK ("amba_pclk") but
still makes it possible for SoCs that have both clock signals
(such as the DB8500) to fetch and prepare/enable/disable/
unprepare both clocks.
The ATCLK is enabled and disabled using the runtime PM
callbacks. As the replicator is a platform device, the
code is a bit different from the other CoreSight components
and the bus core does not activate runtime PM by default,
so we need a few extra calls.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As can be seen from the datasheet of the CoreSight
Components, DDI0314 table A-6 the funnel has a clock signal
apart from the AHB interconnect ("amba_pclk", that we're
already handling) called ATCLK, ARM Trace Clock, that SoC
implementers may provide from an entirely different clock
source. So to model this correctly create an optional
path for handling ATCLK alongside the PCLK so we don't
break old platforms that only define PCLK ("amba_pclk") but
still makes it possible for SoCs that have both clock signals
(such as the DB8500) to fetch and prepare/enable/disable/
unprepare both clocks.
The ATCLK is enabled and disabled using the runtime PM
callbacks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As can be seen from the datasheet of the CoreSight
Components, DDI0314 table A-8 the ETB has a clock signal
apart from the AHB interconnect ("amba_pclk", that we're
already handling) called ATCLK, ARM Trace Clock, that SoC
implementers may provide from an entirely different clock
source. So to model this correctly create an optional
path for handling ATCLK alongside the PCLK so we don't
break old platforms that only define PCLK ("amba_pclk") but
still makes it possible for SoCs that have both clock signals
(such as the DB8500) to fetch and prepare/enable/disable/
unprepare both clocks.
The ATCLK is enabled and disabled using the runtime PM
callbacks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As can be seen from the datasheet of the CoreSight
Components, DDI0314H page A-19 the TPIU has a clock signal
apart from the AHB interconnect ("amba_pclk", that we're
already handling) called ATCLK, ARM Trace Clock, that SoC
implementers may provide from an entirely different clock
source. So to model this correctly create an optional
path for handling ATCLK alongside the PCLK so we don't
break old platforms that only define PCLK ("amba_pclk") but
still makes it possible for SoCs that have both clock signals
(such as the DB8500) to fetch and prepare/enable/disable/
unprepare both clocks in conjunction.
The ATCLK is enabled and disabled using the runtime PM
callbacks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As can be seen from the datasheet of the CoreSight
Components, DDI0401C A.1.1 the ETM has a clock signal
apart from the AHB interconnect ("amba_pclk", that we're
already handling) called ATCLK, ARM Trace Clock, that SoC
implementers may provide from an entirely different clock
source. So to model this correctly create an optional
path for handling ATCLK alongside the PCLK so we don't
break old platforms that only define PCLK ("amba_pclk") but
still makes it possible for SoCs that have both clock signals
(such as the DB8500) to fetch and prepare/enable/disable/
unprepare both clocks.
The ATCLK is enabled and disabled using the runtime PM
callbacks.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
clk_disable_unprepare() was not called. Now the runtime PM
callbacks will make sure the PCLK is properly disabled
after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This uses runtime PM to manage the PCLK ("amba_pclk") instead
of screwing around with the framework by going in and taking
a copy from the amba device. The amba bus core will unprepare
and disable the clock when the device is unused when
CONFIG_PM is selected, else the clock will be always on.
Prior to this patch, as the AMBA primecell bus code enables
the PCLK, it would be left on after probe as
the clk_prepare_enable() and clk_disable_unprepare() was
called and thus just increase and decreas the refcount by
one, without it reaching zero and actually disabling the
clock. Now the runtime PM callbacks will make sure the PCLK
is properly disabled after probe.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Ux500 has a PrimeCell version 4B instead of the 3B as
supported by the driver, extend the match table to cover
this version.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helpfully report a bit more about the hardware found in the
silicon when matching the AMBA device IDs by using the associated
.data pointer in the AMBA match.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using function "module_amba_driver()" makes the code simpler by
eliminating boilerplate code.
Wei Yongjun sent out a set of patches addressing those in all the
coresight driver but missed ETMv3.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ETM ID registers contain valuable information about the capabilities
of the implementation and are very useful when configuring the device for
various trace scenarios.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having access to the ETMv4 management registers is very useful as they
give meaningful information on how the IP block has been configured at
synthesis time.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to control the selection of the resources the
trace unit will use as triggers to perform a trace run.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries related to the counter functionality, more
specifically to set, control and reload the counters.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to access the sequencers related registers,
more specifically the sequencer state, the sequencer state
transition and the sequencer reset control registers.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to control the various mode the address comparator
registers can enact, i.e, start/top, single, and range. Also supplementing
with address comparator types configuration registers access, mandatory
to complete the configuration of the comparator functions.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to configure:
. global timestamp.
. how often trace synchronisation occur.
. the threashold value for cycle counting.
. branch and broadcasting regions.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding sysfs entries to:
. set the tracing entity with default values.
. set various mode associated to the tracing entity.
. select the processing entity the tracing entity relates to.
. select various events of interest.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tracers can be configured with various options at synthesis
time and knowing what resources are available is important for
SW configuration purposes.
As such adding RO sysfs entries for characteristics related to the
tracer implementation.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We attempt to sanity check the buffer depth reported by the hardware by
making sure it is not less than zero however this check will never be true
since the buffer depth is stored in an unsigned integer. Instead change
the check to look for the top bit being set which was the intention.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we initialise the ETB driver we attempt to allocate a buffer suitable
for storing the data buffered in the hardware based on sizing information
reported by the hardware. Unfortunately if the hardware is not properly
configured (for example if power domains are not set up correctly) then we
may read back a nonsensically large value and therefore the allocation will
be too big to succeed. Print an error message showing the amount of memory
we tried to allocate if the buffer allocation fails to help users diagnose
such problems.
Normally it is bad practice to print an error message on memory allocation
failures since there are verbose core messages reported for this but in
this case where the allocation size might be incorrect it is a useful hint.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's the big char/misc driver patchset for 4.1-rc1.
Lots of different driver subsystem updates here, nothing major, full
details are in the shortlog below.
All of this has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlU2IMEACgkQMUfUDdst+yloDQCfbyIRL23WVAn9ckQse/y8gbjB
OT4AoKTJbwndDP9Kb/lrj2tjd9QjNVrC
=xhen
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver patchset for 4.1-rc1.
Lots of different driver subsystem updates here, nothing major, full
details are in the shortlog.
All of this has been in linux-next for a while"
* tag 'char-misc-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (133 commits)
mei: trace: remove unused TRACE_SYSTEM_STRING
DTS: ARM: OMAP3-N900: Add lis3lv02d support
Documentation: DT: lis302: update wakeup binding
lis3lv02d: DT: add wakeup unit 2 and wakeup threshold
lis3lv02d: DT: use s32 to support negative values
Drivers: hv: hv_balloon: correctly handle num_pages>INT_MAX case
Drivers: hv: hv_balloon: correctly handle val.freeram<num_pages case
mei: replace check for connection instead of transitioning
mei: use mei_cl_is_connected consistently
mei: fix mei_poll operation
hv_vmbus: Add gradually increased delay for retries in vmbus_post_msg()
Drivers: hv: hv_balloon: survive ballooning request with num_pages=0
Drivers: hv: hv_balloon: eliminate jumps in piecewiese linear floor function
Drivers: hv: hv_balloon: do not online pages in offline blocks
hv: remove the per-channel workqueue
hv: don't schedule new works in vmbus_onoffer()/vmbus_onoffer_rescind()
hv: run non-blocking message handlers in the dispatch tasklet
coresight: moving to new "hwtracing" directory
coresight-tmc: Adding a status interface to sysfs
coresight: remove the unnecessary configuration coresight-default-sink
...
Keeping drivers related to HW tracing on ARM, i.e coresight,
under "drivers/coresight" doesn't make sense when other
architectures start rolling out technologies of the same
nature.
As such creating a new "drivers/hwtracing" directory where all
drivers of the same kind can reside, reducing namespace
pollution under "drivers/".
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathieu Poirier
Sudeep Holla
Markus Elfring
Wei Yongjun
Suzuki K Poulose
Peter Chen
Olivier Schonken
Chunyan Zhang
Linus Torvalds
Sebastian Andrzej Siewior
Richard Cochran
Greg Kroah-Hartman
Alexander Shishkin
Joonsoo Kim
Li Pengcheng
Pratik Patel
Paul Gortmaker
Eric Long
Laurent FERT
Lucas Tanure
Arnd Bergmann
Geert Uytterhoeven
Andrew F. Davis
Dan Carpenter
Vaishali Thakkar
Ivan T. Ivanov
Pankaj Dubey
Linus Walleij
Mark Brown