Do not emit a warning for extended firmware header fields that are
not used by kernel. This creates unnecessary noise to kernel logs like:
sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 3 size 0x1c
sof-audio-pci 0000:00:1f.3: warning: unknown ext header type 4 size 0x10
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201021182419.1160391-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A delay must be introduced before the shutdown down of the mclk,
as stated in CS42L51 datasheet. Otherwise the codec may
produce some noise after the end of DAPM power down sequence.
The delay between DAC and CLOCK_SUPPLY widgets is too short.
Add a delay in mclk shutdown request to manage the shutdown delay
explicitly. From experiments, at least 10ms delay is necessary.
Set delay to 20ms as recommended in Documentation/timers/timers-howto.rst
when using msleep().
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20201020150109.482-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the current state of code, we would endup with something like
below in /proc/asound/cards for 2 machines based on this driver.
Machine 1:
0 [DB845c ]: DB845c - DB845c
DB845c
Machine 2:
0 [LenovoYOGAC6301]: Lenovo-YOGA-C63 - Lenovo-YOGA-C630-13Q50
LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216
This is not very UCM friendly both w.r.t to common up configs and
card identification, and UCM2 became totally not usefull with just
one ucm sdm845.conf for two machines which have different setups
w.r.t HDMI and other dais.
Reasons for such thing is partly because Qualcomm machine drivers never
cared to set driver_name.
This patch sets up driver name for the this driver to sort out the
UCM integration issues!
after this patch contents of /proc/asound/cards:
Machine 1:
0 [DB845c ]: sdm845 - DB845c
DB845c
Machine 2:
0 [LenovoYOGAC6301]: sdm845 - Lenovo-YOGA-C630-13Q50
LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216
with this its possible to align with what UCM2 expects and we can have
sdm845/DB845.conf
sdm845/LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216.conf
... for board variants. This should scale much better!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201023095849.22894-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing supported rates and formats for the stream, without
which attempt to do playback will fail to find any matching rates/format.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201022130518.31723-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stress tests show that DSP may occasionally be late with signaling WAIT
state when all pins are made use of simultaneously plus start/stop
(pause) gets involved. While this isn't tied to standard audio scenarios
where only System Pin (playback and capture) is involved, ensure user is
not hindered when playing with more advanced scenarios.
>From DSP perspective, clock acts as a resource: low clock equals less
resources, high clock more resources. Relax clock selection procedure so
only low -> high switch is allowed when awaiting WAIT signal times out.
Once active stream count decreases, DSP will have more time internally to
adjust thus low clock selection becomes possible again.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201012103221.30759-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
catpt_dai_pcm_new() invoked during new PCM runtime creation configures
SSP by sending IPC to DSP firmware. For that to succeed device needs to
be up and running. While components default probing behavior -
snd_soc_catpt causing machine board module to load just after it - needs
no changes, machine board's module may be unloaded and re-loaded at a
different time e.g.: when catpt is already asleep.
Wake device explicitly in catpt_dai_pcm_new() to ensure communication is
established before sending any IPCs, enabling those advanced scenarios
in the process.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201012103221.30759-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SST_IPC and its _PCI and _ACPI variants all target
sound/soc/intel/atom solution alone. SND_SST_IPC is the core component,
required for PCI and ACPI based atom platforms both. _PCI and _ACPI
target Merrifield/Edison and Baytrial/Cherrytrail platforms
respectively.
On top of that, there is an equivalent set of configs targeting the same
solution:
- SND_SST_ATOM_HIFI2_PLATFORM (core)
- SND_SST_ATOM_HIFI2_PLATFORM_PCI
- SND_SST_ATOM_HIFI2_PLATFORM_ACPI
As both sets do the same job - allow for granular platform selection -
remove the duplicate set and rely on SND_SST_ATOM_HIFI2_PLATOFRM_XXX
configs alone.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201012095005.29859-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We intentionally do not return an error if we get a permanent failure
from dma_request_chan() in order to support systems which have TX only
or RX only channels. Add a comment documenting this.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20201008161105.21804-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Widening of the supported rate range in the STM32 DFSDM driver.
The rates were previously limited to 8kHz, 16kHz and 32kHz.
Allow rate capture in the whole range 8kHz-48kHz as there is no hardware
limitation to support it.
Actual sample resolution is dependent on audio rate and DFSDM configuration.
Add a trace to allow simple check of sample resolution.
Olivier Moysan (2):
ASoC: stm32: dfsdm: change rate limits
ASoC: stm32: dfsdm: add actual resolution trace
drivers/iio/adc/stm32-dfsdm-adc.c | 4 ++++
drivers/iio/adc/stm32-dfsdm.h | 2 ++
sound/soc/stm/stm32_adfsdm.c | 8 +++-----
3 files changed, 9 insertions(+), 5 deletions(-)
--
2.17.1
These patches are to support audio over DP port on Qualcomm's SC7180 LPASS
Asoc. It includes machine driver, cpu driver, platform driver updates for
HDMI path support, device tree documention, lpass variant structure
optimization and configuration changes.
These patches depends on the DP patch series
https://patchwork.kernel.org/project/dri-devel/list/?series=332029https://lore.kernel.org/patchwork/project/lkml/list/?series=464856
changes since V10:
-- Moved hdmi regmap functions from lpass-hdmi.c to lpass-cpu.c
-- Moved QCOM_REGMAP_FIELD_ALLOC macro from lpass-hdmi.c to lpass.h
changes since V9:
-- Removed unused structures lpass_hdmi.h
changes since V8:
-- Removed redundant structure wrapper for reg map field memebrs
-- Updated lpass_hdmi_regmap_volatile API with appropriate registers as true
and others as false.
changes since V7:
-- Fixed typo errors
-- Created Separate patch for buffer size change
changes since V6:
-- Removed compile time define flag, which used for enabling
HDMI code, based on corresponding config param is included.
-- Updated reg map alloc API with reg map bulk API.
-- Removed unnecessary line splits
changes since V5:
-- Removed unused struct regmap *map in lpass_platform_alloc_hdmidmactl_fields.
-- DMA alloc and free API signature change in lpass-apq8016.c, lpass-ipq806x.c
-- Keeping API "irqreturn_t lpass_platform_hdmiif_irq" under ifdef macro
Changes Since v4:
-- Updated with single compatible node for both I2S and HDMI.
Changes Since v3:
-- Removed id in lpass variant structure and used snd_soc_dai_driver id.
Changes Since v2:
-- Audio buffer size(i.e. LPASS_PLATFORM_BUFFER_SIZE) in lpass-platform.c increased.
Changes Since v1:
-- Commit messages are updated
-- Addressed Rob Herring review comments
V Sujith Kumar Reddy (7):
ASoC: Add sc7180-lpass binding header hdmi define
ASoC: dt-bindings: Add dt binding for lpass hdmi
Asoc:qcom:lpass-cpu:Update dts property read API
Asoc: qcom: lpass:Update lpaif_dmactl members order
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: sc7180: Add support for audio over DP
.../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 74 ++--
include/dt-bindings/sound/sc7180-lpass.h | 1 +
sound/soc/qcom/Kconfig | 5 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/lpass-apq8016.c | 4 +-
sound/soc/qcom/lpass-cpu.c | 249 ++++++++++++-
sound/soc/qcom/lpass-hdmi.c | 258 ++++++++++++++
sound/soc/qcom/lpass-hdmi.h | 102 ++++++
sound/soc/qcom/lpass-ipq806x.c | 4 +-
sound/soc/qcom/lpass-lpaif-reg.h | 49 ++-
sound/soc/qcom/lpass-platform.c | 395 +++++++++++++++++----
sound/soc/qcom/lpass-sc7180.c | 116 +++++-
sound/soc/qcom/lpass.h | 124 ++++++-
13 files changed, 1240 insertions(+), 143 deletions(-)
create mode 100644 sound/soc/qcom/lpass-hdmi.c
create mode 100644 sound/soc/qcom/lpass-hdmi.h
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
At this point mcasp->dev is not initialized and we would have NULL pointer
dereference if we would have failed to get the mem memory resource by
name.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201008085400.19944-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the Texas Instruments TAS2764 amplifier driver
with I/V sense for loud speaker applications.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20201007155341.10139-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
module_is_live() is available only when CONFIG_MODULES is enabled.
Replace its usage with try_module_get() which is present regardless of
said config's status.
Fixes: 7a10b66a5d ("ASoC: Intel: catpt: Device driver lifecycle")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20201007135701.20372-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DFSDM can support a larger rate range than currently
supported in driver.
Increase rate upper limit to 48kHz and allow all rates
in the range 8kHz to 48kHz.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20201007153459.22155-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for audio playback over DP in lpass
sc7180 platform driver. Update lpass_variant
structure for hdmi data configuaration.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-8-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Upadate lpass cpu and platform driver to support audio over dp.
Also add lpass-hdmi.c and lpass-hdmi.h.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-6-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the lpaif_dmactl struct members order to match
HDMI reg map members sequence. Separate Interface reg map
as it is used for I2S control but not for HDMI control,
to make use of bulk API, which makes code more readable.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-5-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update dts property read API call with platform get property
by name, as it make code more readable and avoid conflicts
when array of properties to be used.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-4-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds bindings for lpass hdmi interface
which can support audio path over dp.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1602134223-2562-3-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201006152024.542418-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 9c34d023dc ("ASoC: omap-mcbsp: Re-arrange files for core McBSP
and Sidetone function split"), in rearranging various files, also replaced
calls to platform_get_resource_by_name() + devm_ioremap_resource() with a
single call to devm_platform_ioremap_resource_byname(). However, the
struct resource is needed as we access its members so at present a null
pointer is dereferenced. Fix by doing things the old way.
Fixes: 9c34d023dc ("ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Link: https://lore.kernel.org/r/20201004102535.325547-1-alex.dewar90@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While sst_dsp_get_thread_context() is declared as solution-agnostic, it
is only used by /skylake/ solution. Majority of thread_context field
usages are direct accesses. Improve code cohesiveness and convert to
single usage model.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct sst_pdata is unused among remaining /sound/soc/intel solution so
remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With sound/soc/intel/haswell and /baytrail gone, registers left within
sst-dsp header are atom-specific. Relocate these to atom internal header
to make atom truely independent of sound/soc/common processing code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As sound/soc/intel/haswell and /baytrail are no more, all SST-legacy
specific constants and registers are redundant so remove them.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With redundant DSP operations removed, several fields for structures:
sst_ops, sst_addr and sst_dsp become obsolete. Remove them too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/common/ declares several helper functions for /intel/
solutions. In practice, differences between these - /haswell/ and
/skylake/ especially - led to many of the helpers being used only by a
single solution. As /skylake/ makes no use of these and /haswell/ and
/baytail/ are no more, remove the unused functions.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake driver makes no use of ram_read or ram_write operation so remove
the assignments. This prepares sound/soc/common/sst-dsp* for following
removal of unused DSP operations.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sst-firmware is host to many image loading over DMA operations. Majority
of code targets sound/soc/intel/haswell solution as /baytrail/ never
switched to DMA-based firmware loading. With /haswell/ removed this code
serves no purpose. Address this redundancy.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
baytrail and haswell solutions present within sound/soc/intel are the
only users of sst-acpi componenent and with them removed it becomes
redundant so remove it too.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/baytrail is a niche solution which supports limited
number of BYT products - as described by
snd_soc_acpi_intel_baytrail_legacy_machines table. For a long time it's
deprecated in favor of sound/soc/intel/atom solution with SOF providing
support for some products too effectively rendering /baytrail/ redundant.
Remove deprecated code from ASoC tree.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt-rt5640 is deprecated in favor of bytcr_rt5640 used by
sound/soc/intel/atom and SOF solutions both. Remove redundant machine
board and all related code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt-max98090 is deprecated in favor of cht-bsw-max98090 used by
sound/soc/intel/atom and SOF solutions both. Remove redundant machine
board and all related code.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Newly added catpt solution found in sound/soc/intel/catpt is a direct
replacement to sound/soc/intel/haswell. It covers all features supported
by it and more - by aligning to recommended flows and requirement list
based on Windows driver equivalent. No harm is done to userspace as
catpt - similarly to haswell - loads no extenal topology files while
sharing the exact same ADSP firmware binary.
Given the above, existing haswell code is redundant so remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://lore.kernel.org/r/20201006064907.16277-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM operations for DAI links connected with DSP platform component
involve communication with DSP firmware by IPCs. As IPC protocol may
cause thread to sleep while waiting for a response from DSP, propagate
that information to ALSA core by marking all FE DAIs as nonatomic.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201004090609.29066-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series adds support the other two AIFs present in the sun8i codec,
which can be used for codec2codec DAI links.
This series first cleans up the DAPM component driver so there is an
organized place to put the new widgets. Then it fills out the DAI
driver, removing assumptions that were made for AIF1 (16 bits, 2
channels, certain clock inversions). Some new logic is required to
handle 3 DAIs and the ADC/DAC sharing the same clock. Finally, it adds
the new DAIs, and hooks them up with DAPM widgets and routes per the
hardware topology.
To minimize the number of patches in this series, related device tree
patches (increasing #sound-dai-cells, adding new DAI links) will be sent
separately.
Samuel Holland (25):
ASoC: sun8i-codec: Set up clock tree at probe time
ASoC: sun8i-codec: Swap module clock/reset dependencies
ASoC: sun8i-codec: Sort DAPM controls, widgets, and routes
ASoC: sun8i-codec: Consistently name DAPM widgets and routes
ASoC: sun8i-codec: Correct DAPM widget types
ASoC: sun8i-codec: Fix AIF widget channel references
ASoC: sun8i-codec: Enable AIF mono/stereo control
ASoC: sun8i-codec: Use snd_soc_dai_get_drvdata
ASoC: sun8i-codec: Prepare to extend the DAI driver
ASoC: sun8i-codec: Program format before clock inversion
ASoC: sun8i-codec: Enable all supported clock inversions
ASoC: sun8i-codec: Program the correct word size
ASoC: sun8i-codec: Round up the LRCK divisor
ASoC: sun8i-codec: Correct the BCLK divisor calculation
ASoC: sun8i-codec: Support the TDM slot binding
ASoC: sun8i-codec: Enforce symmetric DAI parameters
ASoC: sun8i-codec: Enable all supported sample rates
ASoC: sun8i-codec: Automatically set the system sample rate
ASoC: sun8i-codec: Constrain to compatible sample rates
ASoC: sun8i-codec: Protect the clock rate while streams are open
ASoC: sun8i-codec: Require an exact BCLK divisor match
ASoC: sun8i-codec: Enable all supported PCM formats
ASoC: sun8i-codec: Generalize AIF clock control
ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF2
ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF3
sound/soc/sunxi/sun8i-codec.c | 1135 ++++++++++++++++++++++++++-------
1 file changed, 894 insertions(+), 241 deletions(-)
--
2.26.2
Bard Liao
Olivier Moysan
Srinivas Kandagatla
Tzung-Bi Shih
Cezary Rojewski
Tomasz Figa
Mark Brown
Codrin Ciubotariu
Peter Ujfalusi
Dan Murphy
V Sujith Kumar Reddy
Colin Ian King
Alex Dewar