Граф коммитов

14089 Коммитов

Автор SHA1 Сообщение Дата
Jeff Dike 8619b86f20 uml: limit request size on COWed devices
COWed devices can't handle more than 32 (64 on x86_64) sectors in one request
due to the size of the bitmap being carried around in the io_thread_req.

Enforce that by telling the block layer not to put too many sectors in
requests to COWed devices.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:39 -07:00
Jeff Dike e8234483e7 uml: export hostfs symbols
Add some exports for hostfs that are required after Alberto Bertogli's fixes
for accessing unlinked host files.

Also did some style cleanups while I was here.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:39 -07:00
Jeff Dike e4c4bf9968 uml: Eliminate kernel allocator wrappers
UML had two wrapper procedures for kmalloc, um_kmalloc and um_kmalloc_atomic
because the flag constants weren't available in userspace code.
kern_constants.h had made kernel constants available for a long time, so there
is no need for these wrappers any more.  Rather, userspace code calls kmalloc
directly with the userspace versions of the gfp flags.

kmalloc isn't a real procedure, so I had to essentially copy the inline
wrapper around __kmalloc.

vmalloc also had its own wrapper for no good reason.  This is now gone.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike c43990162f uml: simplify helper stack handling
run_helper and run_helper_thread had arguments which were the same in all
callers.  run_helper's stack_out was always NULL and run_helper_thread's
stack_order was always 0.  These are now gone, and the constants folded
into the code.

Also fixed leaks of the helper stack in the AIO and SIGIO code.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike 42a359e31a uml: SIGIO support cleanup
Cleanup of the SIGWINCH support.

Some code and comment reformatting.

The stack used for SIGWINCH threads was leaked.  This is now fixed by storing
it with the pid and other information, and freeing it when the thread is
killed.

If something goes wrong with a WIGWINCH thread, and this is discovered in the
interrupt handler, the winch record would leak.  It is now freed, except that
the IRQ isn't freed.  This is hard to do from interrupt context.  This has the
side-effect that the IRQ system maintains a reference to the freed structure,
but that shouldn't cause a problem since the descriptor is disabled.

register_winch_irq is now much better about cleaning up after an
initialization failure.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike d14ad81f80 uml: handle errors on opening host side of consoles
If the host side of a console can't be opened, this will now produce visible
error messages.

enable_chan now returns a status and this is passed up to con_open and
ssl_open, which will complain if anything went wrong.

The default host device for the serial line driver is now a pts device rather
than a pty device since lots of hosts have LEGACY_PTYS disabled.  This had
always been failing on such hosts, but silently.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike 75886f21e3 uml: pty channel tidying
Cleanup, mostly style violations.

Tidied the includes.

getmaster returns a real errno, which pty_open returns if there's a
problem.

The printks now have severity.

Changed os_* calls to call libc directly.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike 63920f4717 uml: xterm driver tidying
Major tidying of the xterm console driver:
	got rid of the tt-mode gdb support
	tidied up the includes
	fixed lots of style violations
	replaced os_* calls with glibc calls in xterm.c
	all printk calls now have a severity indicator
	the error paths of xterm_open are closer to being right

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Eduard-Gabriel Munteanu 89df6bfc04 uml: DEBUG_SHIRQ fixes
DEBUG_SHIRQ generates spurious interrupts, triggering handlers such as
mconsole_interrupt() or line_interrupt().  They expect data to be available to
be read from their sockets/pipes, but in the case of spurious interrupts, the
host didn't actually send anything, so UML hangs in read() and friends.
Setting those fd's as O_NONBLOCK makes DEBUG_SHIRQ-enabled UML kernels boot
and run correctly.

Signed-off-by: Eduard-Gabriel Munteanu <maxdamage@aladin.ro>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike e18eecb8b3 Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE
Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE.

This also adds UML support.

Tested on UML and i386.

[akpm@linux-foundation.org: cleanups, speedups, tweaks]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike 0a6d3a2a38 uml: fix request->sector update
It is theoretically possible for a request to finish and be freed between
writing it to the I/O thread and updating the sector count.  In this case, the
update will dereference a freed pointer.

To avoid this, I delay the update until processing the next sg segment, when
the request pointer is known to be good.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Robert P. J. Day 7ff9057db7 CRIS: replace old-style member inits with designated inits
Replace the old-style structure member initializers with designated
initializers.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Mariusz Kozlowski f47807f359 arm26: remove broken and unused macro
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Sam Ravnborg ebaf4fc13e alpha: fix trivial section mismatch warnings
Fix the following section mismatch warnings:
WARNING: arch/alpha/kernel/built-in.o(.text+0x7c78): Section mismatch: reference to .init.text:init_rtc_irq (between 'common_init_rtc' and 'timer_interrupt')
WARNING: arch/alpha/kernel/built-in.o(.text+0x7c7c): Section mismatch: reference to .init.text:init_rtc_irq (between 'common_init_rtc' and 'timer_interrupt')
WARNING: arch/alpha/kernel/built-in.o(.data+0x2c30): Section mismatch: reference to .init.text:srm_console_setup (between 'srmcons' and 'tsunami_pci_ops')

In all three cases functions marked __init was called outside __init context.
So the fix was to just drop the __init attribute.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
Yoshinori Sato 2fea299f74 h8300 entry.S update
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
Yoshinori Sato 542f739d12 h8300: remove unused file
arch/h8300/kernel/ints.c is unused.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
Yoshinori Sato 86277d5949 h8300 zImage support update
- Add missing files
- Add Makefile target
- Change image base
- Style fix

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
Greg Ungerer 17d8725d36 m68knommu: remove old cache management cruft from mm code
Remove cache management cruft.  This code is dead, all the cache manangement
functions for the ColdFire exist in the header file
include/asm-m68knommu/cacheflush.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
Greg Ungerer 2f75d1098c m68knommu: remove cruft from setup code
Clean out cruft.

. remove include files not needed
. remove not used CAT_ROMARRAY code
. remove generic machine pointers not used
. remove unused functions
. fix email address in copyrights

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
Greg Ungerer 45a82f5198 m68knommu: use TRHEAD_SIZE instead of hard constant
Use THREAD_SIZE instead of a hard constant.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
David Howells 54a3bdd76e FRV: Remove some dead code
Remove some dead chunks of code that are bounded by preprocessor conditionals
controlled by apparently no-longer available config options.

These are:

	CONFIG_BLK_DEV_BLKMEM
	CONFIG_CHR_DEV_FLASH
	CONFIG_BLK_DEV_FLASH
	CONFIG_CONSOLE

[Found by Robert P. J. Day <rpjday@mindspring.com>]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
David Howells 769259160a FRV: Be (self-)consistent and use CONFIG_GDB_CONSOLE everywhere
Be (self-)consistent and use CONFIG_GDB_CONSOLE everywhere rather than using
CONFIG_GDBSTUB_CONSOLE in some places and not others.  This is also then
consistent with other archs.

Also remove the gdbstub console device() op which doesn't seem to be necessary
now (especially as it doesn't compile).

[Found by Robert P. J. Day <rpjday@mindspring.com>]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
David Howells c1a39e0505 FRV: Connect up new syscalls
Connect up new system calls.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:37 -07:00
Jan Beulich 45e98cdb6d page table handling cleanup
Kill pte_rdprotect(), pte_exprotect(), pte_mkread(), pte_mkexec(), pte_read(),
pte_exec(), and pte_user() except where arch-specific code is making use of
them.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:36 -07:00
Yinghai Lu 18a8bd949d serial: convert early_uart to earlycon for 8250
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and
include/asm-x86_64/serial.h.  the serial8250_ports need to be probed late in
serial initializing stage.  the console_init=>serial8250_console_init=>
register_console=>serial8250_console_setup will return -ENDEV, and console
ttyS0 can not be enabled at that time.  need to wait till uart_add_one_port in
drivers/serial/serial_core.c to call register_console to get console ttyS0.
that is too late.

Make early_uart to use early_param, so uart console can be used earlier.  Make
it to be bootconsole with CON_BOOT flag, so can use console handover feature.
and it will switch to corresponding normal serial console automatically.

new command line will be:
	console=uart8250,io,0x3f8,9600n8
	console=uart8250,mmio,0xff5e0000,115200n8
or
	earlycon=uart8250,io,0x3f8,9600n8
	earlycon=uart8250,mmio,0xff5e0000,115200n8

it will print in very early stage:
	Early serial console at I/O port 0x3f8 (options '9600n8')
	console [uart0] enabled
later for console it will print:
	console handover: boot [uart0] -> real [ttyS0]

Signed-off-by: <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:35 -07:00
Eric W. Biderman b1c931e393 x86: initial fixmap support
Needed to get fixed virtual address for USB debug and earlycon with mmio.

Signed-off-by: Eric W. Biderman <ebiderman@xmisson.com>
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:35 -07:00
David S. Miller d54bc2793e [SPARC64]: Fix UP build.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:41:51 -07:00
David S. Miller e0204409df [SPARC64]: dr-cpu unconfigure support.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:32 -07:00
David S. Miller 9918cc2e32 [SPARC64]: Give more accurate errors in dr_cpu_configure().
When cpu_up() fails, we can discern the most likely cause.

If cpu_present() is false, this means the cpu did not appear
in the MD.  If -ENODEV is the error return value, then
the processor did not boot properly into the kernel.

Pass this information back in the dr-cpu response packet.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:24 -07:00
David S. Miller 39dd992aee [SPARC64]: Clear cpu_{core,sibling}_map[] in smp_fill_in_sib_core_maps()
When we hot-plug in new cpus, the core_id and proc_id of existing
cpus can change.  So in order to set the cpu groups correctly we
need to clear the maps out completely first.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:19 -07:00
David S. Miller b37d40d175 [SPARC64]: Fix leak when DR added cpu does not bootup.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:15 -07:00
David S. Miller b53bcb6799 [SPARC64]: Add ->set_affinity IRQ handlers.
dr-cpu unconfigure requests will walk throught he enabled
IRQs and trigger ->set_affinity so that the going-down
cpu no longer has INOs targetted to it.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:11 -07:00
David S. Miller bd0e11ff22 [SPARC64]: Process dr-cpu events in a kthread instead of workqueue.
This will be necessary to handle unconfigure requests
properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:07 -07:00
David S. Miller 8b99cfb8cc [SPARC64]: More sensible udelay implementation.
Take a page from the powerpc folks and just calculate the
delay factor directly.

Since frequency scaling chips use a system-tick register,
the value is going to be the same system-wide.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:02 -07:00
David S. Miller 27a2ef382c [SPARC64]: SMP build fixes.
With the move of ldom_startcpu_cpuid() into smp.c some other
things need to follow along:

1) smp.c is not a driver so we can't use "PFX" macro in the
   printk calls.

2) smp.c now needs asm/io.h and asm/hvtramp.h, ds.c no longer
   does

3) kimage_addr_to_ra() also needs to move into smp.c

While we're here, update copyright info and my email address
in smp.c

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:58 -07:00
David S. Miller 8f3fff2050 [SPARC64]: mdesc.c needs linux/mm.h
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:53 -07:00
David S. Miller b14f5c100c [SPARC64]: Fix build regressions added by dr-cpu changes.
Do not select HOTPLUG_CPU from SUN_LDOMS, that causes
HOTPLUG_CPU to be selected even on non-SMP which is
illegal.

Only build hvtramp.o when SMP, just like trampoline.o

Protect dr-cpu code in ds.c with HOTPLUG_CPU.

Likewise move ldom_startcpu_cpuid() to smp.c and protect
it and the call site with SUN_LDOMS && HOTPLUG_CPU.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:49 -07:00
David S. Miller f8be339c02 [SPARC64]: Unconditionally register vio_bus_type.
The VIO drivers register themselves unconditionally just
like those of any other bus type, so to avoid crashes
on non-VIO systems we need to always register vio_bus_type.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:45 -07:00
David S. Miller 4f0234f4f9 [SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.

When new cpus are configured, the machine description is
updated.  When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus.  That code
also proceeds to update the SMT/multi-core scheduling bitmaps.

cpu_up() does all the work and we return the status back
over the DS channel.

CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:

1) A new trampoline mechanism.  CPUs are booted straight
   out of the hypervisor with MMU disabled and running in
   physical addresses with no mappings installed in the TLB.

   The new hvtramp.S code sets up the critical cpu state,
   installs the locked TLB mappings for the kernel, and
   turns the MMU on.  It then proceeds to follow the logic
   of the existing trampoline.S SMP cpu bringup code.

2) All calls into OBP have to be disallowed when domaining
   is enabled.  Since cpus boot straight into the kernel from
   the hypervisor, OBP has no state about that cpu and therefore
   cannot handle being invoked on that cpu.

   Luckily it's only a handful of interfaces which can be called
   after the OBP device tree is obtained.  For example, rebooting,
   halting, powering-off, and setting options node variables.

CPU removal support will require some infrastructure changes
here.  Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue.  workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed.  Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.

Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed.  So new code will be needed
to walk the active INO list and retarget those cpus as-needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:40 -07:00
David S. Miller b3e13fbeb9 [SPARC64]: Fix setting of variables in LDOM guest.
There is a special domain services capability for setting
variables in the OBP options node.  Guests don't have permanent
store for the OBP variables like a normal system, so they are
instead maintained in the LDOM control node or in the SC.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:36 -07:00
David S. Miller 83292e0a9c [SPARC64]: Fix MD property lifetime bugs.
Property values cannot be referenced outside of
mdesc_grab()/mdesc_release() pairs.  The only major
offender was the VIO bus layer, easily fixed.

Add some commentary to mdesc.h describing these rules.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:33 -07:00
David S. Miller 43fdf27470 [SPARC64]: Abstract out mdesc accesses for better MD update handling.
Since we have to be able to handle MD updates, having an in-tree
set of data structures representing the MD objects actually makes
things more painful.

The MD itself is easy to parse, and we can implement the existing
interfaces using direct parsing of the MD binary image.

The MD is now reference counted, so accesses have to now take the
form:

	handle = mdesc_grab();

	... operations on MD ...

	mdesc_release(handle);

The only remaining issue are cases where code holds on to references
to MD property values.  mdesc_get_property() returns a direct pointer
to the property value, most cases just pull in the information they
need and discard the pointer, but there are few that use the pointer
directly over a long lifetime.  Those will be fixed up in a subsequent
changeset.

A preliminary handler for MD update events from domain services is
there, it is rudimentry but it works and handles all of the reference
counting.  It does not check the generation number of the MDs,
and it does not generate a "add/delete" list for notification to
interesting parties about MD changes but that will be forthcoming.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:28 -07:00
David S. Miller 133f09a169 [SPARC64]: Use more mearningful names for IRQ registry.
All of the interrupts say "LDX RX" and "LDX TX" currently
which is next to useless.  Put a device specific prefix
before "RX" and "TX" instead which makes it much more
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:24 -07:00
David S. Miller e450992d13 [SPARC64]: Initial domain-services driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:20 -07:00
David S. Miller 13077d8028 [SPARC64]: Export powerd facilities for external entities.
Besides the existing usage for power-button interrupts, we'll
want to make use of this code for domain-services where the
LDOM manager can send reboot requests to the guest node.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:16 -07:00
David S. Miller 2c4f4ecb7a [SPARC64]: Add domain-services nodes to VIO device tree.
They sit under the root of the MD tree unlike the rest of
the LDC channel based virtual devices.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:13 -07:00
David S. Miller cb48123584 [SPARC64]: Assorted LDC bug cures.
1) LDC_MODE_RELIABLE is deprecated an unused by anything, plus
   it and LDC_MODE_STREAM were mis-numbered.

2) read_stream() should try to read as much as possible into
   the per-LDC stream buffer area, so do not trim the read_nonraw()
   length by the caller's size parameter.

3) Send data ACKs when necessary in read_nonraw().

4) In read_nonraw() when we get a pure ACK, advance the RX head
   unconditionally past it.

5) Provide the ACKID field in the ldcdgb() packet dump in read_nonraw().
   This helps debugging stream mode LDC channel problems.

6) Decrease verbosity of rx_data_wait() so that it is more useful.
   A debugging message each loop iteration is too much.

7) In process_data_ack() stop the loop checking when we hit lp->tx_tail
   not lp->tx_head.

8) Set the seqid field properly in send_data_nack().

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:09 -07:00
David S. Miller 5a606b72a4 [SPARC64]: Do not ACK an INO if it is disabled or inprogress.
This is also a partial workaround for a bug in the LDOM firmware which
double-transmits RX inos during high load.  Without this, such an
event causes the kernel to loop forever in the interrupt call chain
ACK'ing but never actually running the IRQ handler (and thus clearing
the interrupt condition in the device).

There is still a bad potential effect when double INOs occur,
not covered by this changeset.  Namely, if the INO is already on
the per-cpu INO vector list, we still blindly re-insert it and
thus we can end up losing interrupts already linked in after
it.

We could deal with that by traversing the list before insertion,
but that's too expensive for this edge case.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:05 -07:00
David S. Miller e53e97ce3c [SPARC64]: Add LDOM virtual channel driver and VIO device layer.
Virtual devices on Sun Logical Domains are built on top
of a virtual channel framework.  This, with help of hypervisor
interfaces, provides a link layer protocol with basic
handshaking over which virtual device clients and servers
communicate.

Built on top of this is a VIO device protocol which has it's
own handshaking and message types.  At this layer attributes
are exchanged (disk size, network device addresses, etc.)
descriptor rings are registered, and data transfers are
triggers and replied to.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:03:18 -07:00
Avi Kivity de48935391 i386: Allow smp_call_function_single() to current cpu
This removes the requirement for callers to get_cpu() to check in simple
cases.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:50 +03:00
Avi Kivity 4055551bbc x86_64: Allow smp_call_function_single() to current cpu
This removes the requirement for callers to get_cpu() to check in simple
cases.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:50 +03:00
Avi Kivity 38ef6d195f HOTPLUG: Adapt thermal throttle to CPU_DYING
CPU_DYING is notified in atomic context, so no taking mutexes here.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:50 +03:00
Kristoffer Ericson e509ac4bbc sh: sh-rtc support for SH7709.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-16 09:51:39 +09:00
Al Viro 05bd711ea2 missing argument in bin_attribute ->read()/->write()
Fallout from commit 91a6902958 ('sysfs:
add parameter "struct bin_attribute *" ...')

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 16:40:52 -07:00
Al Viro 22bb3e9e24 pass -msize-long to sparse on s390
s390 is the only 32bit with unsigned long for size_t (usual for those
is unsigned int).  Tell sparse...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 16:40:52 -07:00
Al Viro 0e81c666db the wrong variable checked after request_irq()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-15 16:40:51 -07:00
Tony Luck 4f8de27456 [IA64] Clean away some code inside some non-existent CONFIG ifdefs
Robert P.J. Day has a script that finds places in the code that
use non-existent CONFIG variables.  It complained of two uses in
ia64 specific code: CONFIG_IA64_SDV and CONFIG_KDB (both used in
the hp/sim code).

Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-13 16:31:54 -07:00
Hidetoshi Seto 829a999625 [IA64] ar.itc access must really be after xtime_lock.sequence has been read
The ".acq" semantics of the load only apply w.r.t. other data access.
Reading the clock (ar.itc) isn't a data access so strange things can
happen here.  Specifically the read of ar.itc can be launched as soon
as the read of xtime_lock.sequence is ISSUED.  Since this may cache
miss, and that might cause a thread switch, and there may be cache
contention for the line containing xtime_lock, it may be a long time
before the actual value is returned, so the ar.itc value may be very
stale.

Move the consumption of r28 up before the read of ar.itc to make sure
that we really have got the current value of xtime_lock.sequence
before look at ar.itc.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-13 16:21:44 -07:00
Mark Goodwin 83e12a076e [IA64] correctly count CPU objects in the ia64/sn hwperf interface
Correctly count CPU objects for SGI ia64/sn hwperf interface

Signed-off-by: Mark Goodwin <markgw@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-13 16:09:46 -07:00
Linus Torvalds af09f1e4b3 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix typos in powernow-k8 printk's.
  [CPUFREQ] Restore previously used governor on a hot-replugged CPU
  [CPUFREQ] bugfix cpufreq in combination with performance governor
  [CPUFREQ] powernow-k8 compile fix.
  [CPUFREQ] the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI
  [CPUFREQ] Longhaul - Option to disable ACPI C3 support

Fixed up arch/i386/kernel/cpu/cpufreq/powernow-k8.c due to revert that
got fixed differently in the cpufreq branch.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-13 16:06:30 -07:00
Linus Torvalds e030dbf91a Merge branch 'ioat-md-accel-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop
* 'ioat-md-accel-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: (28 commits)
  ioatdma: add the unisys "i/oat" pci vendor/device id
  ARM: Add drivers/dma to arch/arm/Kconfig
  iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver
  iop13xx: surface the iop13xx adma units to the iop-adma driver
  dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  md: remove raid5 compute_block and compute_parity5
  md: handle_stripe5 - request io processing in raid5_run_ops
  md: handle_stripe5 - add request/completion logic for async expand ops
  md: handle_stripe5 - add request/completion logic for async read ops
  md: handle_stripe5 - add request/completion logic for async check ops
  md: handle_stripe5 - add request/completion logic for async compute ops
  md: handle_stripe5 - add request/completion logic for async write ops
  md: common infrastructure for running operations with raid5_run_ops
  md: raid5_run_ops - run stripe operations outside sh->lock
  raid5: replace custom debug PRINTKs with standard pr_debug
  raid5: refactor handle_stripe5 and handle_stripe6 (v3)
  async_tx: add the async_tx api
  xor: make 'xor_blocks' a library routine for use with async_tx
  dmaengine: make clients responsible for managing channels
  dmaengine: refactor dmaengine around dma_async_tx_descriptor
  ...
2007-07-13 10:52:27 -07:00
Linus Torvalds 31c4ab430a Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Workaround for a sparse warning in include/asm-mips/mach-tx4927/ioremap.h
  [MIPS] Make show_code static and add __user tag
  [MIPS] Workaround for a sparse warning in include/asm-mips/compat.h
  [MIPS] Add some __user tags
  [MIPS] math-emu minor cleanup
  [MIPS] Kill CONFIG_TX4927BUG_WORKAROUND
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_FB_XPERT98
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_SRC_CLK
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_USE32K
  [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1XXX_PSC_SPI
  [CHAR] Delete leftovers of old Alchemy UART driver
2007-07-13 10:44:45 -07:00
Linus Torvalds 8b69ad0e69 Revert "[CPUFREQ] powernow-k8: clarify number of cores."
This reverts commit 904f7a3f04.

As noted by Peter Anvin:

  "It causes build failures on i386.

   Yet another case of unnecessary divergence between i386 and x86-64
   I'm afraid..."

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-13 10:43:52 -07:00
Atsushi Nemoto e1bb828906 [MIPS] Make show_code static and add __user tag
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:01 +01:00
Atsushi Nemoto 5e0373b8e4 [MIPS] Add some __user tags
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:01 +01:00
Atsushi Nemoto e70dfc10b9 [MIPS] math-emu minor cleanup
Declaring emulpc and contpc as "unsigned long" can get rid of some casts.
This also get rid of some sparse warnings.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:00 +01:00
Atsushi Nemoto e50e1c744d [MIPS] Kill CONFIG_TX4927BUG_WORKAROUND
Kill workarounds for very early chip (perhaps pre-TX4927A).

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:00 +01:00
Ralf Baechle b58f4b7aaf [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_FB_XPERT98
Noticed by Robert P. J. Day (rpjday@mindspring.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:00 +01:00
Ralf Baechle 85a882bc35 [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_SRC_CLK
Noticed by Robert P. J. Day (rpjday@mindspring.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:00 +01:00
Ralf Baechle 8f597acab2 [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1000_USE32K
Noticed by Robert P. J. Day (rpjday@mindspring.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:00 +01:00
Ralf Baechle 6fec2e1727 [MIPS] Alchemy: Remove code wrapped by dead symbol CONFIG_AU1XXX_PSC_SPI
Noticed by Robert P. J. Day (rpjday@mindspring.com).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-13 17:40:00 +01:00
Terry Loftin 51b58e3e26 [IA64] use machvec=dig on hpzx1 platforms
On HP zx1 machines, the 'machvec=dig' parameter is needed for the
kdump kernel to avoid problems with the HP sba iommu.  The problem
is that during the boot of the kdump kernel, the iommu is re-initialized,
so in-flight DMA from improperly shutdown drivers causes an IOTLB
miss which leads to an MCA.  With kdump, the idea is to get into the
kdump kernel with as little code as we can, so shutting down drivers
properly is not an option.

The workaround is to add 'machvec=dig' to the kdump kernel boot
parameters.  This makes the kdump kernel avoid using the sba iommu
altogether, leaving the IOTLB intact.  Any ongoing DMA falls
harmlessly outside the kdump kernel.  After the kdump kernel reboots,
all devices will have been shutdown properly and DMA stopped.

This patch pushes that functionality into the sba iommu
initialization code, so that users won't have to find the obscure
documentation telling them about 'machvec=dig'.

This patch only affects HP platforms.  It still includes one
extern declaration in the file, because no applicable header file
exists.

Signed-off-by: Terry Loftin <terry.loftin@hp.com>
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-13 09:16:50 -07:00
Dan Williams 5816815f78 ARM: Add drivers/dma to arch/arm/Kconfig
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 08:06:19 -07:00
Dan Williams 2492c84518 iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver
Adds the platform device definitions and the architecture specific support
routines (i.e. register initialization and descriptor formats) for the
iop-adma driver.

Changelog:
* add support for > 1k zero sum buffer sizes
* added dma/aau platform devices to iq80321 and iq80332 setup
* fixed the calculation in iop_desc_is_aligned
* support xor buffer sizes larger than 16MB
* fix places where software descriptors are assumed to be contiguous, only
  hardware descriptors are contiguous for up to a PAGE_SIZE buffer size
* convert to async_tx
* add interrupt support
* add platform devices for 80219 boards
* do not call platform register macros in driver code
* remove switch() statements for compatible register offsets/layouts
* change over to bitmap based capabilities
* remove unnecessary ARM assembly statement
* checkpatch.pl fixes
* gpl v2 only correction
* phys move to dma_async_tx_descriptor

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 08:06:19 -07:00
Dan Williams 39a8d7d13c iop13xx: surface the iop13xx adma units to the iop-adma driver
Adds the platform device definitions and the architecture specific
support routines (i.e. register initialization and descriptor formats) for the
iop-adma driver.

Changelog:
* added 'descriptor pool size' to the platform data
* add base support for buffer sizes larger than 16MB (hw max)
* build error fix from Kirill A. Shutemov
* rebase for async_tx changes
* add interrupt support
* do not call platform register macros in driver code
* remove unnecessary ARM assembly statement
* checkpatch.pl fixes
* gpl v2 only correction

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 08:06:18 -07:00
Dave Jones 9a60ddbcb7 [CPUFREQ] Fix typos in powernow-k8 printk's.
Based on a patch from Joachim which didn't apply, so I fixed
it up by hand, and also corrected the surrounding indentation
a little.

Signed-off-by: Joachim.Deguara <joachim.deguara@amd.com>
Acked-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-13 01:34:10 -04:00
Andrew Morton aac22d0a79 [CPUFREQ] powernow-k8 compile fix.
Make it compile on UP.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-13 01:29:51 -04:00
Adrian Bunk 68485695e5 [CPUFREQ] the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI
This patch contains the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-13 01:29:51 -04:00
Rafał Bilski 905497c4b2 [CPUFREQ] Longhaul - Option to disable ACPI C3 support
On some motherboards ACPI C3 is available, but it isn't
causing frequency transition on VIA Nehemiah. Longhaul
wasn't working at all earlier, but due to
scaling_cur_speed returning true CPU frequency now, it
looks like CPU is getting stuck at highest frequency
since 2.6.21. I didn't find a reason. Halt is causing
frequency transition.

Signed-off-by: Rafal Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
2007-07-13 01:29:50 -04:00
Paul Mundt 075fc19bde sh: Revert __xdiv64_32 size change.
It's only __div64_32 that needs the fix, __xdiv64_32 behaves as
expected with the original size.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-13 12:27:13 +09:00
Paul Mundt 2f5a5dc0c1 sh: Update r7785rp defconfig.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-13 09:30:57 +09:00
Paul Mundt 2414b86d21 sh: Export div symbols for GCC 4.2 and ST GCC.
GCC 4.2 can emit integer variants of the FP division routines, so
these need to be exported in order to keep the modules happy.

4.1.x versions of the ST compiler have these things backported,
and so also generate these symbols (whereas vanilla gcc 4.1.x
does not), so handle the __GNUC_STM_RELEASE__ case to accomodate
updated versions of the 4.1.x toolchain.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-13 09:30:31 +09:00
Linus Torvalds 4aabab2181 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (50 commits)
  [ARM] sa1100: remove boot time RTC initialisation
  [ARM] sa1100: stop doing our own rtc management over suspend
  [ARM] 4474/1: Do not check the PSR_F_BIT in valid_user_regs
  [ARM] 4473/2:  Take the HWCAP definitions out of the elf.h file
  [ARM] pxa: move platform devices to separate header file
  [ARM] pxa: move device registration into CPU-specific file
  [ARM] pxa: remove boot time RTC initialisation
  [ARM] pxa: stop doing our own rtc management over suspend
  [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code
  [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()
  [ARM] 4440/1: PXA: enable the checking of ICIP2 for IRQs
  [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler()
  [ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio()
  [ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low()
  [ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQS
  [ARM] 4434/1: PXA: remove PXA_IRQ_SKIP
  [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare()
  [ARM] pxa: move pm_ops structure into CPU specific files
  [ARM] pxa: introduce cpu_is_pxaXXX macros
  [ARM] pxa: remove MMC register defines from pxa-regs.h
  ...
2007-07-12 14:17:12 -07:00
Linus Torvalds 702ed6ef37 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix sysfs_create_file return value handling
  [CPUFREQ] ondemand: fix tickless accounting and software coordination bug
  [CPUFREQ] ondemand: add a check to avoid negative load calculation
  [CPUFREQ] Keep userspace governor quiet when it is not being used
  [CPUFREQ] Longhaul - Proper register access
  [CPUFREQ] Kconfig powernow-k8 driver should depend on ACPI P-States driver
  [CPUFREQ] Longhaul - Replace ACPI functions with direct I/O
  [CPUFREQ] Longhaul - Remove duplicate multipliers
  [CPUFREQ] Longhaul - Embedded "conservative"
  [CPUFREQ] acpi-cpufreq: Proper ReadModifyWrite of PERF_CTL MSR
  [CPUFREQ] check return value of sysfs_create_file
  [CPUFREQ] Longhaul - Check ACPI "BM DMA in progress" bit
  [CPUFREQ] Longhaul - Move old_ratio to correct place
  [CPUFREQ] Longhaul - VT8237 support
  [CPUFREQ] Longhaul - Use all kinds of support
  [CPUFREQ] powernow-k8: clarify number of cores.
2007-07-12 13:42:43 -07:00
Linus Torvalds 0806ca2ab3 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Support multiple CPUs going through OS_MCA
  [IA64] silence GCC ia64 unused variable warnings
  [IA64] prevent MCA when performing MMIO mmap to PCI config space
  [IA64] add sn_register_pmi_handler oemcall
  [IA64] Stop bit for brl instruction
  [IA64] SN: Correct ROM resource length for BIOS copy
  [IA64] Don't set psr.ic and psr.i simultaneously
2007-07-12 13:41:29 -07:00
Linus Torvalds 21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Linus Torvalds dc690d8ef8 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits)
  sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
  sysfs: make directory dentries and inodes reclaimable
  sysfs: implement sysfs_get_dentry()
  sysfs: move sysfs_drop_dentry() to dir.c and make it static
  sysfs: restructure add/remove paths and fix inode update
  sysfs: use sysfs_mutex to protect the sysfs_dirent tree
  sysfs: consolidate sysfs spinlocks
  sysfs: make kobj point to sysfs_dirent instead of dentry
  sysfs: implement sysfs_find_dirent() and sysfs_get_dirent()
  sysfs: implement SYSFS_FLAG_REMOVED flag
  sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags
  sysfs: make sysfs_drop_dentry() access inodes using ilookup()
  sysfs: Fix oops in sysfs_drop_dentry on x86_64
  sysfs: use singly-linked list for sysfs_dirent tree
  sysfs: slim down sysfs_dirent->s_active
  sysfs: move s_active functions to fs/sysfs/dir.c
  sysfs: fix root sysfs_dirent -> root dentry association
  sysfs: use iget_locked() instead of new_inode()
  sysfs: reorganize sysfs_new_indoe() and sysfs_create()
  sysfs: fix parent refcounting during rename and move
  ...
2007-07-12 13:40:20 -07:00
Linus Torvalds e1bd2ac5a6 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (183 commits)
  [TG3]: Update version to 3.78.
  [TG3]: Add missing NVRAM strapping.
  [TG3]: Enable auto MDI.
  [TG3]: Fix the polarity bit.
  [TG3]: Fix irq_sync race condition.
  [NET_SCHED]: ematch: module autoloading
  [TCP]: tcp probe wraparound handling and other changes
  [RTNETLINK]: rtnl_link: allow specifying initial device address
  [RTNETLINK]: rtnl_link API simplification
  [VLAN]: Fix MAC address handling
  [ETH]: Validate address in eth_mac_addr
  [NET]: Fix races in net_rx_action vs netpoll.
  [AF_UNIX]: Rewrite garbage collector, fixes race.
  [NETFILTER]: {ip, nf}_conntrack_sctp: fix remotely triggerable NULL ptr dereference (CVE-2007-2876)
  [NET]: Make all initialized struct seq_operations const.
  [UDP]: Fix length check.
  [IPV6]: Remove unneeded pointer idev from addrconf_cleanup().
  [DECNET]: Another unnecessary net/tcp.h inclusion in net/dn.h
  [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options.
  [IPV6]: Do not send RH0 anymore.
  ...

Fixed up trivial conflict in Documentation/feature-removal-schedule.txt
manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 13:31:22 -07:00
Russell King ca9ced7f67 Merge branches 'at91', 'davinci', 'imx', 'iop', 'ixp', 'ks8695', 'misc', 'pxa' and 's3c' into devel 2007-07-12 21:30:18 +01:00
Russell King fcae8e0988 [ARM] sa1100: remove boot time RTC initialisation
The RTC library code contains everything necessary to set the
system time from the RTC; for similar reasons as the previous
commit, it's far better to let the RTC library code sort this
out rather than implement something which might not be
appropriate for everyone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 21:29:45 +01:00
Russell King f3ebbc20ab [ARM] sa1100: stop doing our own rtc management over suspend
Remove the RTC management over a suspend/resume cycle.  As per the
corresponding PXA patch, the RTC library code handles updating
system time on resume.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 21:29:06 +01:00
Linus Torvalds 0b9062f6b5 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Rename PC speaker code
  [MIPS] Don't use genrtc.
  [MIPS] Remove unused time.c for swarm
  [MIPS] Sparse: Use NULL for pointer
  [MIPS] Fix a sparse warning in arch/mips/pci/pci.c
  [MIPS] SMTC: Interrupt mask backstop hack
  [MIPS] separate platform_device registration for VR41xx RTC
  [MIPS] Separate platform_device registration for VR41xx GPIO
  [MIPS] MIPSsim: Fix build.
  [MIPS] separate platform_device registration for VR41xx serial interface
  [MIPS] Include cacheflush.h in uncache.c
  [MIPS] Cleanup tlbdebug.h
  [MIPS] Change names of local variables to silence sparse (part 2)
  [MIPS] Workaround for a sparse warning in include/asm-mips/io.h
  [MIPS] RM: Use only phyiscal address for 82596 and 53c710
  [MIPS] Hydrogen3: Remove remaining bits of code.
  [MIPS] DEC: Fix modpost warning.
  Revert "[MIPS] DEC: Fix modpost warning."
  [MIPS] Fix resume for 64K page size on R4000 class processors.
2007-07-12 13:28:54 -07:00
Linus Torvalds 82afee684f Merge master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits)
  Blackfin serial driver: supporting BF548-EZKIT serial port
  Video Console: Blackfin doesnt support VGA console
  Blackfin arch: Add peripheral io API to gpio header file
  Blackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver
  Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging
  Blackfin arch: as pointed out by Robert P. J. Day, update the CPU_FREQ name to match current Kconfig
  Blackfin arch: extract the entry point from the linked kernel
  Blackfin arch: clean up some coding style issues
  Blackfin arch: combine the common code of free_initrd_mem and free_initmem
  Blackfin arch: Add Support for Peripheral PortMux and resouce allocation
  Blackfin arch: use PAGE_SIZE when doing aligns rather than hardcoded values
  Blackfin arch: fix bug set dma_address properly in dma_map_sg
  Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by default
  Blackfin arch: Port the dm9000 driver to Blackfin by using the correct low-level io routines
  Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x arch
  Blackfin arch: scrub dead code
  Blackfin arch: Fix Warning add some defines in BF54x header file
  Blackfin arch: add BF54x missing GPIO access functions
  Blackfin arch: Some memory and code optimizations - Fix SYS_IRQS
  Blackfin arch: Enable BF54x PIN/GPIO interrupts
  ...
2007-07-12 13:25:24 -07:00
H. Peter Anvin c397368232 Remove old i386 setup code
This removes the old i386 setup code.  This is done as a separate patch
to avoid breaking git bisect as some of the i386 code was also used by
the old x86-64 code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:56 -07:00
H. Peter Anvin 91a6c462b0 Use the new x86 setup code for x86-64; unify with i386
This unifies arch/*/boot (except arch/*/boot/compressed) between
i386 and x86-64, and uses the new x86 setup code for x86-64 as well.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 4fd06960f1 Use the new x86 setup code for i386
This patch hooks the new x86 setup code into the Makefile machinery.  It
also adapts boot/tools/build.c to a two-file (as opposed to three-file)
universe, and simplifies it substantially.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin f2d98ae63d Linker script for the new x86 setup code
Linker script to define the layout of the new x86 setup code.
Includes assert for size overflow and a misaligned setup header.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 626073132b Assembly header and main routine for new x86 setup code
The assembly header and initialization code, and the main() routine.
main.c also contains some miscellaneous very short routines.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 7052fdd890 Code for actual protected-mode entry
This is the code which actually does the switch to protected mode,
including all preparation.  It is also responsible for invoking the
boot loader hooks, if present.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 5e8ddcbe86 Video mode probing support for the new x86 setup code
Video mode probing for the new x86 setup code.  This code breaks down
different drivers into modules.  This code deliberately drops support
for a lot of the vendor-specific mode probing present in the assembly
version, since a lot of those probes have been found to be stale in
current versions of those chips -- frequently, support for those modes
have been dropped from recent video BIOSes due to space constraints,
but the video BIOS signatures are still the same.

However, additional drivers should be extremely straightforward to plug
in, if desirable.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 337496eb73 Voyager support for the new x86 setup code
Voyager support for the new x86 setup code.  This implements the same
functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 449f2ab946 Memory probing support for the new x86 setup code
Probe memory (INT 15h: E820, E801, 88).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 3b53d3045b MCA support for new x86 setup code
MCA probing support for the new x86 setup code.  This implements the
same functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin d13444a5a5 EDD probing code for the new x86 setup code
Probe EDD and MBR signatures, in order to make it easier to map
physical hard drives to BIOS drives.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 31b54f40e1 CPU features verification for the new x86 setup code
Verify that the CPU has enough features to run the kernel.  This may
entail enabling features on some CPUs.

By doing this in the setup code we can be guaranteed to still be able to
write to the console through the BIOS.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 0008ea39bd Version string for the new x86 setup code
Module which only includes the kernel version string.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 1543610ad7 Console-writing code for the new x86 setup code
This implements writing text to the console, including printf().

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin e44c22f65f Command-line parsing code for the new x86 setup code
Simple command-line parser which allows us to access the kernel command
line from the setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 49df18fa3f APM probing code
APM probing code for the new x86 setup code.  This implements the
same functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 5a8a8128bc A20 handling code
A20 handling code for the new x86 setup code.  This implements the same
algorithms as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin 5be8656615 String-handling functions for the new x86 setup code.
strcmp(), memcpy(), memset(), as well as routines to copy to and from
other segments (as pointed to by fs and gs).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:55 -07:00
H. Peter Anvin ad7e906d56 Simple bitops for the new x86 setup code.
A simple collection of bitops for the new x86 setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 62bd0337d0 Top header file for new x86 setup code
Top header file for the new x86 setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin f7f4a5fbd2 Header file to produce 16-bit code with gcc
gcc for i386 can be used with the assembly prefix ".code16gcc" to generate
16-bit (real-mode) code.  This header file provides the assembly prefix.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 77e1dd654b x86-64: add CONFIG_PHYSICAL_ALIGN for consistency with i386
Add CONFIG_PHYSICAL_ALIGN (currently as a hardcoded constant) to provide
consistency with i386.  This value is manifest in the bzImage header.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 48c7ae674f Make struct boot_params a real structure, and remove obsolete fields
Make struct boot_params a real structure, and remove the handling of
some obsolete fields, in particular hd*_info, which was only used by
the ST-506 driver, and likely to be wrong for that driver on any
modern BIOS.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 9c25d134b3 Make definitions for struct e820entry and struct e820map consistent
Make definitions for struct e820entry and struct e820map
consistent between i386 and x86-64.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin 85414b693a Define zero-page offset 0x1e4 as a scratch field, and use it
The relocatable kernel code needs a scratch field for the decompressor
to determine its own location.  It was using a location inside
struct screen_info; reserve a free location and document it as scratch
instead.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
Venki Pallipadi 1d67953f2b Use a new CPU feature word to cover features that are spread around
Some Intel features are spread around in different CPUID leafs like 0x5,
0x6 and 0xA.  Make this feature detection code common across i386 and
x86_64.

Display Intel Dynamic Acceleration feature in /proc/cpuinfo. This feature
will be enabled automatically by current acpi-cpufreq driver.

Refer to Intel Software Developer's Manual for more details about the feature.

Thanks to hpa (H Peter Anvin) for the making the actual code detecting the
scattered features data-driven.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin de32e04175 x86 Kconfig: change X86_MINIMUM_CPU_MODEL to X86_MINIMUM_CPU_FAMILY
The X86_MINIMUM_CPU_MODEL name isn't really right, so change it to
X86_MINIMUM_CPU_FAMILY.  Also, the default minimum should be 3, not 0.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
H. Peter Anvin ec481536b1 Unify the CPU features vectors between i386 and x86-64
Unify the handling of the CPU features vectors between i386 and x86-64.
This also adopts the collapsing of features which are required at
compile-time into constant tests from x86-64 to i386.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 10:55:54 -07:00
Ralf Baechle de61b542b8 [MIPS] Rename PC speaker code
While the PC speaker is wired up to the i8254 there is more to the i8254
than just the PC speaker so this code was getting in the way under its
current name.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:23 +01:00
Ralf Baechle fdc1f93847 [MIPS] Don't use genrtc.
The only pseudo-legitimate MIPS user of genrtc was a systems that doesn't
have an RTC in hardware at all.  At this point faking one is a little
pointless ...
2007-07-12 17:41:21 +01:00
Yoichi Yuasa 1f2c6d6b0c [MIPS] Remove unused time.c for swarm
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:21 +01:00
Atsushi Nemoto 28fc582cc9 [MIPS] Sparse: Use NULL for pointer
This fixes a sparse warning:

arch/mips/kernel/traps.c:376:44: warning: Using plain integer as NULL pointer

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:20 +01:00
Atsushi Nemoto 8ed07a1cce [MIPS] Fix a sparse warning in arch/mips/pci/pci.c
Fixes this warning:

arch/mips/pci/pci.c:284:18: warning: symbol 'dev' shadows an earlier one
arch/mips/pci/pci.c:272:17: originally declared here

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:17 +01:00
Kevin D. Kissell 0db34215c7 [MIPS] SMTC: Interrupt mask backstop hack
To support multiple TC microthreads acting as "CPUs" within a VPE,
VPE-wide interrupt mask bits must be specially manipulated during
interrupt handling. To support legacy drivers and interrupt controller
management code, SMTC has a "backstop" to track and if necessary restore
the interrupt mask. This has some performance impact on interrupt service
overhead. Disable it only if you know what you are doing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:17 +01:00
Yoichi Yuasa bd0765098b [MIPS] separate platform_device registration for VR41xx RTC
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:15 +01:00
Yoichi Yuasa 44173fb2e8 [MIPS] Separate platform_device registration for VR41xx GPIO
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:15 +01:00
Ralf Baechle a74b460518 [MIPS] MIPSsim: Fix build.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:14 +01:00
Yoichi Yuasa 891649409e [MIPS] separate platform_device registration for VR41xx serial interface
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:13 +01:00
Atsushi Nemoto 8c41286edf [MIPS] Include cacheflush.h in uncache.c
This fixes this sparse warning:

arch/mips/lib/uncached.c:38:22: warning: symbol 'run_uncached' was not declared. Should it be static?

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:13 +01:00
Atsushi Nemoto 40df3831f9 [MIPS] Cleanup tlbdebug.h
Also include tlbdebug.h in dump_tlb.c and r3k_dump_tlb.c.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:11 +01:00
Thomas Bogendoerfer 9815778ae0 [MIPS] RM: Use only phyiscal address for 82596 and 53c710
Use physical address for 82596 and 53c710 base address

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:08 +01:00
Ralf Baechle 0adc327bda [MIPS] Hydrogen3: Remove remaining bits of code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:08 +01:00
Ralf Baechle 3bd3966448 [MIPS] Fix resume for 64K page size on R4000 class processors.
Problem reported by Peter Watkins <pwatkins@sicortex.com> but this is
a different fix.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:05 +01:00
Russell King 46c41e62a1 [ARM] pxa: move platform devices to separate header file
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:21 +01:00
Russell King 34f3231f43 [ARM] pxa: move device registration into CPU-specific file
This allows individual CPU support to determine which platform
devices should be registered.  Also fix a copy-n-paste bug in
the I2C power platform device entry.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:21 +01:00
Russell King 4adb70fc1b [ARM] pxa: remove boot time RTC initialisation
The RTC library code contains everything necessary to set the
system time from the RTC; for similar reasons as the previous
commit, it's far better to let the RTC library code sort this
out rather than implement something which might not be
appropriate for everyone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:17 +01:00
Russell King 2aca0a8657 [ARM] pxa: stop doing our own rtc management over suspend
Remove the RTC management over a suspend/resume cycle.  Firstly,
we may not be using the internal RTC for time keeping; some
platforms have an external RTC for this inspite of the PXA having
an internal RTC.  Secondly, the RTC library code handles updating
system time on resume.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:16 +01:00
Eric Miao f53f066c25 [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code
Since the number of dma channels varies between pxa25x and pxa27x, it
introduces some specific code in dma.c. This patch moves the specific
code to pxa25x.c and pxa27x.c and makes dma.c more generic.

1. add pxa_init_dma() for dma initialization, the number of channels
   are passed in by the argument

2. add a "prio" field to the "struct pxa_dma_channel" for the channel
   priority, and is initialized in pxa_init_dma()

3. use a general priority comparison with the channels "prio" field so
   to remove the processor specific pxa_for_each_dma_prio macro,  this
   is not lightning fast as the original one,  but it is acceptable as
   it happens when requesting dma, which is usually not so performance
   critical

Signed-off-by: eric miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:16 +01:00
Eric Miao cd49104d99 [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()
/* should be ok this time, I aligned this patch to your arm:pxa2.mbox */

1. move pxa25x specific IRQ initialization code to pxa25x_init_irq()
and pxa27x code to pxa27x_init_irq(), remove pxa_init_irq()

2. replace all pxa_init_irq() with their PXA25x or PXA27x specific
functions

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:15 +01:00
Eric Miao 4a3dcd35c8 [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler()
1. use GPIO_IRQ_mask[] to select those bits of interest, actually
   only those "unmasked" GPIO IRQs with their corresponding bits
   in GPIO_IRQ_mask[] set to "1" should be checked

2. remove #ifdef PXA_LAST_GPIO > 96 .. #endif, GPIO_IRQ_mask[]
   is used to mask out the irrelevant bits, so that even though
   the GEDR3 on PXA25x is reserved, it will be masked, and the
   following code will never run. Another point is that GPIO85-
   GPIO95 bits within GEDR2 will also be masked out on PXA25x

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:14 +01:00
Eric Miao 348f2e3b29 [ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio()
move the GPIO IRQ initialization code to pxa_init_irq_gpio()

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:11 +01:00
Eric Miao 53665a50fd [ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low()
1. move low IRQ initialization code to pxa_init_irq_low()

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:11 +01:00
Eric Miao c08b7b3ef6 [ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQS
1. define PXA_GPIO_IRQ_BASE to be right after the internal IRQs,
   and define PXA_GPIO_IRQ_NUM to be 128 for all PXA2xx variants

2. make the code specific to the high IRQ numbers (32..64) to be
   PXA27x specific

3. add a function pxa_init_irq_high() to initialize the internal
   high IRQ chip, the invoke of this function could be moved to
   PXA27x specific initialization code

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:10 +01:00
Eric Miao 486c955118 [ARM] 4434/1: PXA: remove PXA_IRQ_SKIP
1. PXA_IRQ_SKIP is defined to be 7 on PXA25x so that the first IRQ
   starts from zero. This makes IRQ numbering inconsistent between
   PXA25x and PXA27x. Remove this macro so that the same IRQ_XXXXX
   definition has the same value on both PXA25x and PXA27x.

2. make IRQ_SSP3..IRQ_PWRI2C valid only if PXA27x is defined, this
   avoids unintentional use of these macros on PXA25x

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:09 +01:00
Russell King 88dfe98c68 [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare()
pxa_pm_prepare() tried to validate the suspend method type.  As
noted in previous commits:
	eb9289eb20
	9c372d06ce
	e8c9c50269

the checking of the suspend type in the 'prepare' method is the
wrong place to do this; use the 'valid' method instead.  This
means that pxa_pm_prepare() can be entirely removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:06 +01:00
Russell King e176bb05fe [ARM] pxa: move pm_ops structure into CPU specific files
Move the pm_ops structure into the PXA25x and PXA27x support
files.  Remove the old pxa_pm_prepare() function, and rename
the both pxa_cpu_pm_prepare() functions as pxa_pm_prepare().
We'll fix that later.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:05 +01:00
Russell King b23170c01f [ARM] pxa: introduce cpu_is_pxaXXX macros
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:04 +01:00
Russell King f4b6a0a401 [ARM] pxa: use mutexes instead of semaphores
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:27:55 +01:00
Russell King f62c3f2c35 [ARM] pxa: remove useless pxa_pm_finish() function
pxa_pm_finish() does nothing but return zero.  The core code
does nothing with this return value, and will not try to call
the finish method in the pm_ops structure if it is NULL.

Therefore, we can remove this useless function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:27:53 +01:00
George G. Davis 909d6c6c80 [ARM] 4453/1: Fully Decode ARM instruction set state in show_regs() tombstone
The ARM show_regs() tombstone only partially decodes which ARM ISA was
executing at the time a fault occurred displaying either "(T)" for the
Thumb case or nothing at all for other cases.  This patch therefore
explicitly identifies which state the processor is in at the time of
a fault: ARM, Thumb, Jazelle or JazelleEE.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:35 +01:00
Bill Gatliff 9d20fdd58e [ARM] 4423/1: add ATAGS support
Examines the ATAGS pointer (r2) at boot, and interprets
a nonzero value as a reference to an ATAGS structure. A
suitable ATAGS structure replaces the kernel's command line.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:33 +01:00
Catalin Marinas 7d09e85448 [ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format
The current arch/arm/boot/compressed/head.S code only supports cores
to ARMv6 with the old CPU Id format. This patch adds support for the
new ARMv6 with the new CPU Id and ARMv7 cores that no longer have the
ARMv4 cache operations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:33 +01:00
Russell King 6d78b5f9c6 [ARM] Fix bounding error in ioremap_pfn()
If size=16M offset=2K then we should map two supersections
rather than just one.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:33 +01:00
Russell King 4486b86368 [ARM] riscpc: fix decompressor font file handling
font_acorn_8x8.o was being built in drivers/video/console/ twice
during a build _in the same location_ - once for the kernel proper,
and once for the decompressor.  The result is when you came to run an
install target, the kernel was always rebuilt due to this file
apparantly having been built with different compiler arguments.

Solve this by making a local copy at build time in the decompressor's
directory.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:32 +01:00
Andrew Victor 8a87a996ea [ARM] 4377/1: KS8695: GPIO driver
Driver to control the GPIO pins on the KS8695 processor.
The driver natively supports the Generic GPIO interface.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:34 +01:00
Russell King eab03b3f66 [ARM] If linux/irq.h is included, asm/irq.h is not required
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:18 +01:00
Michael-Luke Jones d85ed59524 [ARM] 4407/1: Remove in-kernel mach id setting for gtwx5715 ixp4xx board
If MACH_GTWX5715 is set in Kconfig, this code sets the mach id
automatically. Howeber, this means that any IXP4xx kernel which
is setup to support the gtwx5715 board will not successfully boot
on any other board.

If the bootloader sets the wrong mach id, it should be set correctly
by a kernel shim.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Michael-Luke Jones ddaca4a26e [ARM] 4408/2: Fixup support for gtwx5715 ixp4xx board
This patch fixes up compiling of the gtwx5715 board setup code,
which has apparently been broken since 2.6.18 and the generic
IRQ changes. In addition it removes some unecessary extern
declarations in the gtwx5715-pci.c file.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Imre Kaloz dcdeeb21c0 [ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support
This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series.

This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected.

Updated to stay below the 80 char limit in uncompress.h

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Imre Kaloz 46918bd13b [ARM] 4425/2: Gateway 7001 series support
This patch provides support for the Gateway 7001 AccessPoint series.

Updated to stay below the 80 char limit in uncompress.h

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Vladimir Barinov 4ad48b4bfa [ARM] 4385/2: ixdp425: NAND support
IXDP425 NAND support (arch specific part).

The generic platform driver that is used by ixdp425 platfrom is already
in upstream kernel in 2.6.22-rc1.

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: Ruslan Sushko <rsushko@ru.mvista.com>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Dan Williams 51198ea947 [ARM] 4429/2: iop13xx: expose the 'iop' attribute versions of the tpmi control registers
The tpmi control registers can be accessed on the internal bus via an
address with PCI attributes or IOP attributes (i.e. read-only,
read-write... etc).  The sas driver needs access to the iop-attribute
registers for initialization.

Changelog:
* use ARRAY_SIZE for num_resources, Russell King

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:55 +01:00
Pavel Pisa 89bba43514 [ARM] 4374/3: i.MX/MX1 clock event source
Support clock event source based on i.MX general purpose
timer in free running timer mode.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:39 +01:00
Pavel Pisa b3e6a508ed [ARM] 4373/1: i.MX/MX1 GPIO support implementation
Support for generic input output for MX1 family.
The implementation prevents allocation of one pin
by two users, but does not store pointer to the user
description permanently, because this solution
would have bigger memory overhead.

The simple way to integrate code with per BSP
pins setup and allocation is required else all GPIO
registration checking is useless. The function
imx_gpio_setup_multiple_pins() can be used for this
purpose in future.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:39 +01:00
Andrew Victor d0f9b55ece [ARM] 4420/2: AT91: GPIO buttons on SAM9261-EK board
Register the GPIO-connected buttons on the SAM9261-EK board as a
"gpio-keys" platform device.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:21 +01:00
Andrew Victor cdf95c7369 [ARM] 4379/1: AT91: LCD support on SAM9261-EK and SAM9263-EK boards
Add board-specific setup for the LCD on the Atmel AT91SAM9261-EK and
AT91SAM9263-EK boards.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:21 +01:00
Ben Dooks 3c3e69cd4c [ARM] 4470/2: OSIRIS: large page NAND support
Add support for the partition layout on the revision B
modules which have large page NAND fitted.

The new partition table accounts for the use of the
128KiB block parts, which means the second partition
on the device is moved to the new boundary.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:01:13 +01:00
Ben Dooks 5ce4b1fe6c [ARM] 4467/3: BAST: AX88796 device resources
Add resources for the AX88796 on the Simtec BAST.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:27 +01:00
Ben Dooks ad3613f479 [ARM] 4469/1: ANUBIS: large page NAND support
Add support for the partition layour used on the
revision B modules which ship with large page NAND
flash as default.

The differnce between the old and new layouts is that
the large page devices use 128KiB blocks, so the
initial loader partition now ends at 128KiB boundary
pushing the begining of partition 1 up. The rest of
the partitions are in the same place as the small page
NAND devices.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:25 +01:00
Ben Dooks 8a9ccb7f18 [ARM] 4468/2: ANUBIS: Add SM501 device resources
Add resources for the SM501 present on the
Simtec Anubis board, including the framebuffer
and the I2C for DDC.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:24 +01:00
Ben Dooks eac1d8dab0 [ARM] 4466/1: ANUBIS: Anubis AX88796 support
This patch adds the resources necessary for the
AX88796 driver to attach to the AX88796 network
controller fitted on the Simtec Anubis board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:23 +01:00
Vladimir Barinov 83f53220f8 [ARM] 4432/5: davinci: pin mux support
Support pin multiplexing configurations driver for TI DaVinci SoC

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Acked-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 09:57:09 +01:00
Vladimir Barinov 3d9edf09d4 [ARM] 4457/2: davinci: GPIO support
Support GPIO driver for TI DaVinci SoC

Signed-off-by: Vladimir Barinov <vbarino@ru.mvista.com>
Acked-by: David Brownell <david-b@pacbell.net>
Acked-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 09:57:09 +01:00
Vladimir Barinov 3e062b07ad [ARM] 4430/1: davinci: clock control support
Support clock control driver for TI DaVinci SoC

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 09:57:09 +01:00
Erik Johansson 8cb661d6a4 sh: fix race in parallel out-of-tree build
Depending on which of the three dependencies for archprepare (in
arch/sh/Makefile) get built first, the directory include/asm-sh may or
may not exist when the maketools target is built. If the directory does
not exist, awk will fail to generate machtypes.h. This patch fixes this
by creating the directory before awk is executed.

Signed-off-by: Erik Johansson <erik.johansson@motorola.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12 16:37:00 +09:00
Bryan Wu db0fa20645 Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 14:55:05 +08:00
Mike Frysinger 798b77095d Blackfin arch: as pointed out by Robert P. J. Day, update the CPU_FREQ name to match current Kconfig
Cc: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 14:35:15 +08:00
Mike Frysinger 5cf77a5fd0 Blackfin arch: extract the entry point from the linked kernel
extract the entry point from the linked kernel rather than
assuming entry point == load address

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 14:26:26 +08:00
Bryan Wu c04d66bbbd Blackfin arch: clean up some coding style issues
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 17:26:31 +08:00
Mike Frysinger 1d1894749c Blackfin arch: combine the common code of free_initrd_mem and free_initmem
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:32:00 +08:00
Michael Hennerich 5610db61cf Blackfin arch: Add Support for Peripheral PortMux and resouce allocation
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:32:52 +08:00
Mike Frysinger 520473b077 Blackfin arch: use PAGE_SIZE when doing aligns rather than hardcoded values
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:20:20 +08:00
Sonic Zhang b07af760c9 Blackfin arch: fix bug set dma_address properly in dma_map_sg
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:18:08 +08:00
Michael Hennerich 157cc5aad9 Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by default
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 16:20:21 +08:00
Alex Landau f40d24d909 Blackfin arch: Port the dm9000 driver to Blackfin by using the correct low-level io routines
Signed-off-by: Alex Landau <landau.alex@gmail.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 12:11:48 +08:00
Michael Hennerich 9be343c5bc Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x arch
However there are similar things in the EBIU_DDRQUE Register

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 11:58:44 +08:00
Mike Frysinger 9401e618c8 Blackfin arch: scrub dead code
we converted to using a system call for userspace spinlocks
rather than a dedicated exception long ago

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 11:50:43 +08:00
Kristoffer Ericson 0caf3ead51 sh: Kill off dead mach.c for hp6xx.
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12 10:47:08 +09:00
Robert P. J. Day bdf4fa536b sh: Update the alignment when 4K stacks are used.
Use the newly added .bss.page_aligned section for aligning the stacks
rather than THREAD_SIZE.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12 10:41:52 +09:00
Paul Mundt e181127a7a sh: Add a .bss.page_aligned section for 4K stacks.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12 10:40:36 +09:00
Paul Mundt aab1b16a61 sh: Don't let SH-4A clobber SH-4 CFLAGS.
Older compilers don't support the -m4a{,nofpu} flags, which has the
side-effect of allowing FP operations to be emitted. Switch this to
incremental tuning, so we at least have -m4-nofpu as a fallback for
the gcc3 toolchains.

Without this, certain modules emit references to __udivsi3_i4 and
__sdivsi3_i4.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-12 09:48:54 +09:00
Tejun Heo 7b595756ec sysfs: kill unnecessary attribute->owner
sysfs is now completely out of driver/module lifetime game.  After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners.  Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.

This patch kills now unnecessary attribute->owner.  Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.

For more info regarding lifetime rule cleanup, please read the
following message.

  http://article.gmane.org/gmane.linux.kernel/510293

(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:06 -07:00
Rafael J. Wysocki 93160c6397 PM: do not use saved_state from struct dev_pm_info on ARM
The saved_state member of 'struct dev_pm_info' that's going to be removed
is used in arch/arm/common/locomo.c, arch/arm/common/sa1111.c and
arch/arm/mach-sa1100/neponset.c.  Change the code in there to use local
variables for saving the state of devices during suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:02 -07:00
Matthew Wilcox 36e235901f PCI: Only build PCI syscalls on architectures that want them
The PCI syscalls are built on every architecture except X86, but only
a few have ever hooked them up.  Use a new Kconfig symbol to save a
couple of kB on the architectures that have never used the syscalls.
Tested on x86 and ia64 only.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:13 -07:00
Jan Beulich caa5171622 PCI: remove pci_dac_dma_... APIs
Based on replies to a respective query, remove the pci_dac_dma_...() APIs
(except for pci_dac_dma_supported() on Alpha, where this function is used
in non-DAC PCI DMA code).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: David Miller <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Jiri Slaby c43eaa02ab PCI: i386: traps, change VENDOR to DEVICE
traps, change VENDOR to DEVICE

Change macro for SGI lithium (arch/i386/mach-visws/traps.c) device from
VENDOR to DEVICE, because it's a device id.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:10 -07:00
Auke Kok 44c10138fd PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:10 -07:00