Граф коммитов

805 Коммитов

Автор SHA1 Сообщение Дата
Thomas Gleixner d9817ebeee genirq: Provide Kconfig
The generic irq Kconfig options are copied around all archs. Provide a
generic Kconfig file which can be included.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100927121843.217333624@linutronix.de>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-04 11:01:05 +02:00
Hendrik Brueckner ffe8018c34 initramfs: fix initramfs size calculation
The size of a built-in initramfs is calculated in init/initramfs.c by
"__initramfs_end - __initramfs_start".  Those symbols are defined in the
linker script include/asm-generic/vmlinux.lds.h:

#define INIT_RAM_FS                                                     \
        . = ALIGN(PAGE_SIZE);                                           \
        VMLINUX_SYMBOL(__initramfs_start) = .;                          \
        *(.init.ramfs)                                                  \
        VMLINUX_SYMBOL(__initramfs_end) = .;

If the initramfs file has an odd number of bytes, the "__initramfs_end"
symbol points to an odd address, for example, the symbols in the
System.map might look like:

    0000000000572000 T __initramfs_start
    00000000005bcd05 T __initramfs_end	  <-- odd address

At least on s390 this causes a problem:

Certain s390 instructions, especially instructions for loading addresses
(larl) or branch addresses must be on even addresses.  The compiler loads
the symbol addresses with the "larl" instruction.  This instruction sets
the last bit to 0 and, therefore, for odd size files, the calculated size
is one byte less than it should be:

    0000000000540a9c <populate_rootfs>:
      540a9c:     eb cf f0 78 00 24       stmg    %r12,%r15,120(%r15),
      540aa2:     c0 10 00 01 8a af       larl    %r1,572000 <__initramfs_start>
      540aa8:     c0 c0 00 03 e1 2e       larl    %r12,5bcd04 <initramfs_end>
                                                  (Instead of  5bcd05)
      ...
      540abe:     1b c1                   sr      %r12,%r1

To fix the problem, this patch introduces the global variable
__initramfs_size, which is calculated in the "usr/initramfs_data.S" file.
The populate_rootfs() function can then use the start marker of the
.init.ramfs section and the value of __initramfs_size for loading the
initramfs.  Because the start marker and size is sufficient, the
__initramfs_end symbol is no longer needed and is removed.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-29 16:28:59 +02:00
Chuck Lever 56463e50d1 NFS: Use super.c for NFSROOT mount option parsing
Replace duplicate code in NFSROOT for mounting an NFS server on '/'
with logic that uses the existing mainline text-based logic in the NFS
client.

Add documenting comments where appropriate.

Note that this means NFSROOT mounts now use the same default settings
as v2/v3 mounts done via mount(2) from user space.

  vers=3,tcp,rsize=<negotiated default>,wsize=<negotiated default>

As before, however, no version/protocol negotiation with the server is
done.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17 10:54:37 -04:00
Jens Axboe 6d0aed7a38 do_mounts: only enable PARTUUID for CONFIG_BLOCK
When CONFIG_BLOCK is not enabled:

init/do_mounts.c:71: error: implicit declaration of function 'dev_to_part'
init/do_mounts.c:71: warning: initialization makes pointer from integer without a cast
init/do_mounts.c:73: error: dereferencing pointer to incomplete type
init/do_mounts.c:76: error: dereferencing pointer to incomplete type
init/do_mounts.c:76: error: dereferencing pointer to incomplete type
init/do_mounts.c:102: error: implicit declaration of function 'part_pack_uuid'
init/do_mounts.c:104: error: 'block_class' undeclared (first use in this function)

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-17 10:00:46 +02:00
Vivek Goyal e43473b7f2 blkio: Core implementation of throttle policy
o Actual implementation of throttling policy in block layer. Currently it
  implements READ and WRITE bytes per second throttling logic. IOPS throttling
  comes in later patches.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:42:52 +02:00
Jens Axboe 38b6f45a97 core: match_dev_by_uuid() should not be marked __init
It is also called outside the scope of init functions. Stephen
reports:

WARNING: init/mounts.o(.text+0x21a): Section mismatch in reference from the function name_to_dev_t() to the function .init.text:match_dev_by_uuid()
The function name_to_dev_t() references
the function __init match_dev_by_uuid().
This is often because name_to_dev_t lacks a __init
annotation or the annotation of match_dev_by_uuid is wrong.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 08:33:54 +02:00
Will Drewry b5af921ec0 init: add support for root devices specified by partition UUID
This is the third patch in a series which adds support for
storing partition metadata, optionally, off of the hd_struct.

One major use for that data is being able to resolve partition
by other identities than just the index on a block device.  Device
enumeration varies by platform and there's a benefit to being able
to use something like EFI GPT's GUIDs to determine the correct
block device and partition to mount as the root.

This change adds that support to root= by adding support for
the following syntax:

  root=PARTUUID=hex-uuid

Signed-off-by: Will Drewry <wad@chromium.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-15 16:14:03 +02:00
Stephan Sperber 681b3049dd Kconfig: delete duplicate word
Deleted a word which apeared twice.

Signed-off-by: Stephan Sperber <sperberstephan@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-23 15:35:15 +02:00
Paul E. McKenney a57eb940d1 rcu: Add a TINY_PREEMPT_RCU
Implement a small-memory-footprint uniprocessor-only implementation of
preemptible RCU.  This implementation uses but a single blocked-tasks
list rather than the combinatorial number used per leaf rcu_node by
TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies
processing.  This version also takes advantage of uniprocessor execution
to accelerate grace periods in the case where there are no readers.

The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU.

This implementation is a step towards having RCU implementation driven
off of the SMP and PREEMPT kernel configuration variables, which can
happen once this implementation has accumulated sufficient experience.

Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as
suggested by Steve Rostedt in order to avoid the compiler-reordering
issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183).

As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte
savings compared to CONFIG_TREE_PREEMPT_RCU.  Of course, for non-real-time
workloads, CONFIG_TINY_RCU is even better.

	CONFIG_TREE_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   6170	    825	     28	   7023	   kernel/rcutree.o
				   ----
				   7026    Total

	CONFIG_TINY_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   2081	     81	      8	   2170	   kernel/rcutiny.o
				   ----
				   2183    Total

	CONFIG_TINY_RCU (non-preemptible)

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	    719	     25	      0	    744	   kernel/rcutiny.o
				    ---
				    757    Total

Requested-by: Loïc Minier <loic.minier@canonical.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-20 08:55:00 -07:00
Paul E. McKenney 4d87ffadbb rcu: Fix RCU_FANOUT help message
Commit cf244dc01b added a fourth level to the TREE_RCU hierarchy,
but the RCU_FANOUT help message still said "cube root".  This commit
fixes this to "fourth root" and also emphasizes that production
systems are well-served by the default.  (Stress-testing RCU itself
uses small RCU_FANOUT values in order to test large-system code paths
on small(er) systems.)

Located-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-19 17:18:04 -07:00
Paul E. McKenney 687d7a960a rcu: restrict TREE_RCU to SMP builds with !PREEMPT
Because both TINY_RCU and TREE_PREEMPT_RCU have been in mainline for
several releases, it is time to restrict the use of TREE_RCU to SMP
non-preemptible systems.  This reduces testing/validation effort.  This
commit is a first step towards driving the selection of RCU implementation
directly off of the SMP and PREEMPT configuration parameters.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-19 17:18:04 -07:00
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Linus Torvalds 26df0766a7 Merge branch 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* 'params' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (22 commits)
  param: don't deref arg in __same_type() checks
  param: update drivers/acpi/debug.c to new scheme
  param: use module_param in drivers/message/fusion/mptbase.c
  ide: use module_param_named rather than module_param_call
  param: update drivers/char/ipmi/ipmi_watchdog.c to new scheme
  param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes.
  param: lock myri10ge_fw_name against sysfs changes.
  param: simple locking for sysfs-writable charp parameters
  param: remove unnecessary writable charp
  param: add kerneldoc to moduleparam.h
  param: locking for kernel parameters
  param: make param sections const.
  param: use free hook for charp (fix leak of charp parameters)
  param: add a free hook to kernel_param_ops.
  param: silence .init.text references from param ops
  Add param ops struct for hvc_iucv driver.
  nfs: update for module_param_named API change
  AppArmor: update for module_param_named API change
  param: use ops in struct kernel_param, rather than get and set fns directly
  param: move the EXPORT_SYMBOL to after the definitions.
  ...
2010-08-12 10:01:59 -07:00
KAMEZAWA Hiroyuki 65e0e81166 memcg: remove experimental from swap account config
It's 11 months since we changed swap_map[] to indicates SWAP_HAS_CACHE.
Since that, memcg's swap accounting has been very stable and it seems
it can be maintained.

So, I'd like to remove EXPERIMENTAL from the config.

Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:18 -07:00
Rusty Russell 914dcaa84c param: make param sections const.
Since this section can be read-only (they're in .rodata), they should
always have been const.  Minor flow-through various functions.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
2010-08-11 23:04:19 +09:30
Linus Torvalds 8c8946f509 Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
  fanotify: use both marks when possible
  fsnotify: pass both the vfsmount mark and inode mark
  fsnotify: walk the inode and vfsmount lists simultaneously
  fsnotify: rework ignored mark flushing
  fsnotify: remove global fsnotify groups lists
  fsnotify: remove group->mask
  fsnotify: remove the global masks
  fsnotify: cleanup should_send_event
  fanotify: use the mark in handler functions
  audit: use the mark in handler functions
  dnotify: use the mark in handler functions
  inotify: use the mark in handler functions
  fsnotify: send fsnotify_mark to groups in event handling functions
  fsnotify: Exchange list heads instead of moving elements
  fsnotify: srcu to protect read side of inode and vfsmount locks
  fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
  fsnotify: use _rcu functions for mark list traversal
  fsnotify: place marks on object in order of group memory address
  vfs/fsnotify: fsnotify_close can delay the final work in fput
  fsnotify: store struct file not struct path
  ...

Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
2010-08-10 11:39:13 -07:00
Kevin Winchester e446127134 init/main.c: mark do_one_initcall* as __init_or_module
Andrew Morton suggested that the do_one_initcall and do_one_initcall_debug
functions can be marked __init_or_module such that they can be discarded
for the CONFIG_MODULES=N case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:06 -07:00
Kevin Winchester 22c5c03b42 init/main.c: fix warning: 'calltime.tv64' may be used uninitialized
Using:

	gcc (GCC) 4.5.0 20100610 (prerelease)

The following warning appears:

	init/main.c: In function `do_one_initcall':
	init/main.c:730:10: warning: `calltime.tv64' may be used uninitialized in this function

This warning is actually correct, as the global initcall_debug could
arguably be changed by the initcall.

Correct this warning by extracting a new function, do_one_initcall_debug,
that performs the initcall for the debug case.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:06 -07:00
Linus Torvalds 78417334b5 Merge branch 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing
* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  do_coredump: Do not take BKL
  init: Remove the BKL from startup code
2010-08-07 17:06:54 -07:00
Linus Torvalds 3b7433b8a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-07 12:42:58 -07:00
Linus Torvalds 4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Linus Torvalds ffd386a9a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: allow limited allocation before slab is online
  percpu: make @dyn_size always mean min dyn_size in first chunk init functions
2010-08-04 15:17:52 -07:00
Suresh Siddha 6ee0578b4d workqueue: mark init_workqueues() as early_initcall()
Mark init_workqueues() as early_initcall() and thus it will be initialized
before smp bringup. init_workqueues() registers for the hotcpu notifier
and thus it should cope with the processors that are brought online after
the workqueues are initialized.

x86 smp bringup code uses workqueues and uses a workaround for the
cold boot process (as the workqueues are initialized post smp_init()).
Marking init_workqueues() as early_initcall() will pave the way for
cleaning up this code.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-08-01 13:05:29 +02:00
Eric Paris 939a67fc4c Audit: split audit watch Kconfig
Audit watch should depend on CONFIG_AUDIT_SYSCALL and should select
FSNOTIFY.  This splits the spagetti like mixing of audit_watch and
audit_filter code so they can be configured seperately.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-07-28 09:58:19 -04:00
Eric Paris 67640b602f Audit: audit watches depend on fsnotify
CONFIG_AUDIT builds audit_watches which depend on fsnotify.  Make
CONFIG_AUDIT select fsnotify.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2010-07-28 09:58:18 -04:00
Eric Paris 28a3a7eb3b audit: reimplement audit_trees using fsnotify rather than inotify
Simply switch audit_trees from using inotify to using fsnotify for it's
inode pinning and disappearing act information.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-07-28 09:58:17 -04:00
Tejun Heo 181a51f6e0 slow-work: kill it
slow-work doesn't have any user left.  Kill it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
2010-07-23 13:14:49 +02:00
Arnd Bergmann 5e3d20a68f init: Remove the BKL from startup code
I have shown by code review that no driver takes
the BKL at init time any more, so whatever the
init code was locking against is no longer there
and it is now safe to remove the BKL there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedt@goodmis>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-07-09 15:40:32 +02:00
Ingo Molnar 08f8ba0799 Merge commit 'v2.6.35-rc4' into perf/core
Merge reason: Pick up the latest perf fixes

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 08:30:58 +02:00
Linus Torvalds 123f94f22e Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Cure nr_iowait_cpu() users
  init: Fix comment
  init, sched: Fix race between init and kthreadd
2010-07-02 09:52:58 -07:00
Peter Zijlstra 9715856922 init: Fix comment
Apparently "pid-1" confuses people...

Requested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: torvalds@linux-foundation.org
Cc: randy.dunlap@oracle.com
Cc: Ilya Loginov <isloginov@gmail.com>
LKML-Reference: <1277887031.1868.82.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-30 10:42:44 +02:00
Thomas Gleixner f384c954c9 Merge branch 'linus' into perf/core
Reason: Further changes conflict with upstream fixes

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-06-28 22:33:24 +02:00
Peter Zijlstra b433c3d454 init, sched: Fix race between init and kthreadd
Ilya reported that on a very slow machine he could reliably
reproduce a race between forking init and kthreadd. We first
fork init so that it  obtains pid-1, however since the scheduler
is already fully running at this point it can preempt and run
the init thread before we spawn and set kthreadd_task.

The init thread can then attempt spawning kthreads without
kthreadd being present which results in an OOPS.

Reported-by: Ilya Loginov <isloginov@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1277736661.3561.110.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-28 18:21:30 +02:00
Tejun Heo 099a19d91c percpu: allow limited allocation before slab is online
This patch updates percpu allocator such that it can serve limited
amount of allocation before slab comes online.  This is primarily to
allow slab to depend on working percpu allocator.

Two parameters, PERCPU_DYNAMIC_EARLY_SIZE and SLOTS, determine how
much memory space and allocation map slots are reserved.  If this
reserved area is exhausted, WARN_ON_ONCE() will trigger and allocation
will fail till slab comes online.

The following changes are made to implement early alloc.

* pcpu_mem_alloc() now checks slab_is_available()

* Chunks are allocated using pcpu_mem_alloc()

* Init paths make sure ai->dyn_size is at least as large as
  PERCPU_DYNAMIC_EARLY_SIZE.

* Initial alloc maps are allocated in __initdata and copied to
  kmalloc'd areas once slab is online.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
2010-06-27 18:50:00 +02:00
Ingo Molnar 646b1db495 Merge commit 'v2.6.35-rc3' into perf/core
Merge reason: Go from -rc1 base to -rc3 base, merge in fixes.
2010-06-18 10:53:19 +02:00
Thomas Renninger 75cbfb97a1 ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=
Patch is against latest Linus master branch and is expected to be
safe bug fix.

You get:
ACPI: HARDWARE addr space,NOT supported yet
for each ACPI defined CPU which status is active, but exceeds
maxcpus= count.

As these "not booted" CPUs do not run an idle routine
and echo X >/proc/acpi/processor/*/throttling did not work
I couldn't find a way to really access not onlined/booted
machines. Still this should get fixed and
/proc/acpi/processor/X dirs of cores exceeding maxcpus
should not show up.

I wonder whether this could get cleaned up by truncating possible cpu mask
and nr_cpu_ids to setup_max_cpus early some day
(and not exporting setup_max_cpus anymore then).
But this needs touching of a lot other places...

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: travis@sgi.com
CC: linux-acpi@vger.kernel.org
CC: lenb@kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
2010-06-09 18:04:12 -04:00
Li Zefan 039ca4e74a tracing: Remove kmemtrace ftrace plugin
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-09 17:31:22 +02:00
Américo Wang 30dbb20e68 tracing: Remove boot tracer
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.

Nobody seem to be using it so far. Then just remove it.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-06-08 23:31:28 +02:00
Linus Torvalds 1f73897861 Merge branch 'for-35' of git://repo.or.cz/linux-kbuild
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...
2010-06-01 08:55:52 -07:00
Haicheng Li 1f522509c7 mem-hotplug: avoid multiple zones sharing same boot strapping boot_pageset
For each new populated zone of hotadded node, need to update its pagesets
with dynamically allocated per_cpu_pageset struct for all possible CPUs:

    1) Detach zone->pageset from the shared boot_pageset
       at end of __build_all_zonelists().

    2) Use mutex to protect zone->pageset when it's still
       shared in onlined_pages()

Otherwises, multiple zones of different nodes would share same boot strapping
boot_pageset for same CPU, which will finally cause below kernel panic:

  ------------[ cut here ]------------
  kernel BUG at mm/page_alloc.c:1239!
  invalid opcode: 0000 [#1] SMP
  ...
  Call Trace:
   [<ffffffff811300c1>] __alloc_pages_nodemask+0x131/0x7b0
   [<ffffffff81162e67>] alloc_pages_current+0x87/0xd0
   [<ffffffff81128407>] __page_cache_alloc+0x67/0x70
   [<ffffffff811325f0>] __do_page_cache_readahead+0x120/0x260
   [<ffffffff81132751>] ra_submit+0x21/0x30
   [<ffffffff811329c6>] ondemand_readahead+0x166/0x2c0
   [<ffffffff81132ba0>] page_cache_async_readahead+0x80/0xa0
   [<ffffffff8112a0e4>] generic_file_aio_read+0x364/0x670
   [<ffffffff81266cfa>] nfs_file_read+0xca/0x130
   [<ffffffff8117b20a>] do_sync_read+0xfa/0x140
   [<ffffffff8117bf75>] vfs_read+0xb5/0x1a0
   [<ffffffff8117c151>] sys_read+0x51/0x80
   [<ffffffff8103c032>] system_call_fastpath+0x16/0x1b
  RIP  [<ffffffff8112ff13>] get_page_from_freelist+0x883/0x900
   RSP <ffff88000d1e78a8>
  ---[ end trace 4bda28328b9990db ]

[akpm@linux-foundation.org: merge fix]
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Andi Kleen <andi.kleen@intel.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:01 -07:00
Jens Axboe ee9a3607fb Merge branch 'master' into for-2.6.35
Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:27:26 +02:00
Jason Wessel 0b4b3827db x86, kgdb, init: Add early and late debug states
The kernel debugger can operate well before mm_init(), but the x86
hardware breakpoint code which uses the perf api requires that the
kernel allocators are initialized.

This means the kernel debug core needs to provide an optional arch
specific call back to allow the initialization functions to run after
the kernel has been further initialized.

The kdb shell already had a similar restriction with an early
initialization and late initialization.  The kdb_init() was moved into
the debug core's version of the late init which is called
dbg_late_init();

CC: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:29 -05:00
Jason Wessel 67fc4e0cb9 kdb: core for kgdb back end (2 of 2)
This patch contains the hooks and instrumentation into kernel which
live outside the kernel/debug directory, which the kdb core
will call to run commands like lsmod, dmesg, bt etc...

CC: linux-arch@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:21 -05:00
Ingo Molnar 48652ced15 Merge commit 'v2.6.34-rc6' into sched/core 2010-05-07 11:27:54 +02:00
Jens Axboe 7407cf355f Merge branch 'master' into for-2.6.35
Conflicts:
	fs/block_dev.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-29 09:36:24 +02:00
Vivek Goyal afc24d49c1 blk-cgroup: config options re-arrangement
This patch fixes few usability and configurability issues.

o All the cgroup based controller options are configurable from
  "Genral Setup/Control Group Support/" menu. blkio is the only exception.
  Hence make this option visible in above menu and make it configurable from
  there to bring it inline with rest of the cgroup based controllers.

o Get rid of CONFIG_DEBUG_CFQ_IOSCHED.

  This option currently does two things.

  - Enable printing of cgroup paths in blktrace
  - Enables CONFIG_DEBUG_BLK_CGROUP, which in turn displays additional stat
    files in cgroup.

  If we are using group scheduling, blktrace data is of not really much use
  if cgroup information is not present. To get this data, currently one has to
  also enable CONFIG_DEBUG_CFQ_IOSCHED, which in turn brings the overhead of
  all the additional debug stat files which is not desired.

  Hence, this patch moves printing of cgroup paths under
  CONFIG_CFQ_GROUP_IOSCHED.

  This allows us to get rid of CONFIG_DEBUG_CFQ_IOSCHED completely. Now all
  the debug stat files are controlled only by CONFIG_DEBUG_BLK_CGROUP which
  can be enabled through config menu.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Divyesh Shah <dpshah@google.com>
Reviewed-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-26 19:27:56 +02:00
Phillip Lougher df37bd156d initramfs: handle unrecognised decompressor when unpacking
The unpack routine fails to handle the decompress_method() returning
unrecognised decompressor (compress_name == NULL).  This results in the
routine looping eventually oopsing on an out of bounds memory access.

Note this bug is usually hidden, only triggering on trailing junk after
one or more correct compressed blocks.  The case of the compressed archive
being complete junk is (by accident?) caught by the if (state != Reset)
check because state is initialised to Start, but not updated due to the
decompressor not having been called.  Obviously if the junk is trailing a
correctly decompressed buffer, state == Reset from the previous call to
the decompressor.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:26 -07:00
Ingo Molnar b257c14ceb Merge branch 'linus' into sched/core
Merge reason: merge the latest fixes, update to -rc4.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-15 09:36:16 +02:00
Li Zefan 32bd7eb5a7 sched: Remove remaining USER_SCHED code
This is left over from commit 7c9414385e ("sched: Remove USER_SCHED"")

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Howells <dhowells@redhat.com>
LKML-Reference: <4BA9A05F.7010407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:12:00 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Miao Xie 5ab116c934 cpuset: fix the problem that cpuset_mem_spread_node() returns an offline node
cpuset_mem_spread_node() returns an offline node, and causes an oops.

This patch fixes it by initializing task->mems_allowed to
node_states[N_HIGH_MEMORY], and updating task->mems_allowed when doing
memory hotplug.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Reported-by: Nick Piggin <npiggin@suse.de>
Tested-by: Nick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:21 -07:00
Kirill A. Shutemov 0dea116876 cgroup: implement eventfd-based generic API for notifications
This patchset introduces eventfd-based API for notifications in cgroups
and implements memory notifications on top of it.

It uses statistics in memory controler to track memory usage.

Output of time(1) on building kernel on tmpfs:

Root cgroup before changes:
	make -j2  506.37 user 60.93s system 193% cpu 4:52.77 total
Non-root cgroup before changes:
	make -j2  507.14 user 62.66s system 193% cpu 4:54.74 total
Root cgroup after changes (0 thresholds):
	make -j2  507.13 user 62.20s system 193% cpu 4:53.55 total
Non-root cgroup after changes (0 thresholds):
	make -j2  507.70 user 64.20s system 193% cpu 4:55.70 total
Root cgroup after changes (1 thresholds, never crossed):
	make -j2  506.97 user 62.20s system 193% cpu 4:53.90 total
Non-root cgroup after changes (1 thresholds, never crossed):
	make -j2  507.55 user 64.08s system 193% cpu 4:55.63 total

This patch:

Introduce the write-only file "cgroup.event_control" in every cgroup.

To register new notification handler you need:
- create an eventfd;
- open a control file to be monitored. Callbacks register_event() and
  unregister_event() must be defined for the control file;
- write "<event_fd> <control_fd> <args>" to cgroup.event_control.
  Interpretation of args is defined by control file implementation;

eventfd will be woken up by control file implementation or when the
cgroup is removed.

To unregister notification handler just close eventfd.

If you need notification functionality for a control file you have to
implement callbacks register_event() and unregister_event() in the
struct cftype.

[kamezawa.hiroyu@jp.fujitsu.com: Kconfig fix]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Dan Malek <dan@embeddedalley.com>
Cc: Vladislav Buzov <vbuzov@embeddedalley.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Alexander Shishkin <virtuoso@slind.org>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:37 -08:00
H Hartley Sweeten 7463e633c5 init/main.c: make setup_max_cpus static for !SMP
The only in tree external users of the symbol setup_max_cpus are in
arch/x86/.  The files ./kernel/alternative.c, ./kernel/visws_quirks.c, and
./mm/kmemcheck/kmemcheck.c are all guarded by CONFIG_SMP being defined.
For this case the symbol is an unsigned int and declared as an extern in
include/linux/smp.h.

When CONFIG_SMP is not defined the symbol setup_max_cpus is
a constant value that is only used in init/main.c.  Make the symbol
static for this case.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:32 -08:00
H Hartley Sweeten 8aaed5bec2 init/initramfs.c: fix "symbol shadows an earlier one" noise
The symbol 'count' is a local global variable in this file.  The function
clean_rootfs() should use a different symbol name to prevent "symbol
shadows an earlier one" noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:29 -08:00
Andreas Mohr 9a85b8d604 init/main.c: improve usability in case of init binary failure
- new Documentation/init.txt file describing various forms of failure
  trying to load the init binary after kernel bootup

- extend the init/main.c init failure message to direct to
  Documentation/init.txt

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:29 -08:00
Rafael J. Wysocki 452aa6999e mm/pm: force GFP_NOIO during suspend/hibernation and resume
There are quite a few GFP_KERNEL memory allocations made during
suspend/hibernation and resume that may cause the system to hang, because
the I/O operations they depend on cannot be completed due to the
underlying devices being suspended.

Avoid this problem by clearing the __GFP_IO and __GFP_FS bits in
gfp_allowed_mask before suspend/hibernation and restoring the original
values of these bits in gfp_allowed_mask durig the subsequent resume.

[akpm@linux-foundation.org: fix CONFIG_PM=n linkage]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:26 -08:00
Linus Torvalds 0f2cc4ecd8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
  init: Open /dev/console from rootfs
  mqueue: fix typo "failues" -> "failures"
  mqueue: only set error codes if they are really necessary
  mqueue: simplify do_open() error handling
  mqueue: apply mathematics distributivity on mq_bytes calculation
  mqueue: remove unneeded info->messages initialization
  mqueue: fix mq_open() file descriptor leak on user-space processes
  fix race in d_splice_alias()
  set S_DEAD on unlink() and non-directory rename() victims
  vfs: add NOFOLLOW flag to umount(2)
  get rid of ->mnt_parent in tomoyo/realpath
  hppfs can use existing proc_mnt, no need for do_kern_mount() in there
  Mirror MS_KERNMOUNT in ->mnt_flags
  get rid of useless vfsmount_lock use in put_mnt_ns()
  Take vfsmount_lock to fs/internal.h
  get rid of insanity with namespace roots in tomoyo
  take check for new events in namespace (guts of mounts_poll()) to namespace.c
  Don't mess with generic_permission() under ->d_lock in hpfs
  sanitize const/signedness for udf
  nilfs: sanitize const/signedness in dealing with ->d_name.name
  ...

Fix up fairly trivial (famous last words...) conflicts in
drivers/infiniband/core/uverbs_main.c and security/tomoyo/realpath.c
2010-03-04 08:15:33 -08:00
Eric W. Biederman 2bd3a997be init: Open /dev/console from rootfs
To avoid potential problems with an empty /dev open /dev/console
from rootfs instead of waiting to mount our root filesystem and
mounting it there.   This effectively guarantees that there will
be a device node, and it won't be on a filesystem that we will
ever unmount, so there are no issues with leaving /dev/console
open and pinning the filesystem.

This is actually more effective than automatically mounting
devtmpfs on /dev because it removes removes the occasionally
problematic assumption that /dev/console exists from the boot
code.

With this patch I was able to throw busybox on my /boot partition
(which has no /dev directory) and boot into userspace without
problems.

The only possible negative consequence I can think of is that
someone out there deliberately used did not use a character device
that is major 5 minor 2 for /dev/console.  Does anyone know of a
situation in which that could make sense?

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:56:07 -05:00
Linus Torvalds fb7b096d94 Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  x86: Fix out of order of gsi
  x86: apic: Fix mismerge, add arch_probe_nr_irqs() again
  x86, irq: Keep chip_data in create_irq_nr and destroy_irq
  xen: Remove unnecessary arch specific xen irq functions.
  smp: Use nr_cpus= to set nr_cpu_ids early
  x86, irq: Remove arch_probe_nr_irqs
  sparseirq: Use radix_tree instead of ptrs array
  sparseirq: Change irq_desc_ptrs to static
  init: Move radix_tree_init() early
  irq: Remove unnecessary bootmem code
  x86: Add iMac9,1 to pci_reboot_dmi_table
  x86: Convert i8259_lock to raw_spinlock
  x86: Convert nmi_lock to raw_spinlock
  x86: Convert ioapic_lock and vector_lock to raw_spinlock
  x86: Avoid race condition in pci_enable_msix()
  x86: Fix SCI on IOAPIC != 0
  x86, ia32_aout: do not kill argument mapping
  x86, irq: Move __setup_vector_irq() before the first irq enable in cpu online path
  x86, irq: Update the vector domain for legacy irqs handled by io-apic
  x86, irq: Don't block IRQ0_VECTOR..IRQ15_VECTOR's on all cpu's
  ...
2010-03-03 08:15:37 -08:00
Linus Torvalds f66ffdedbf Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  sched: Fix SCHED_MC regression caused by change in sched cpu_power
  sched: Don't use possibly stale sched_class
  kthread, sched: Remove reference to kthread_create_on_cpu
  sched: cpuacct: Use bigger percpu counter batch values for stats counters
  percpu_counter: Make __percpu_counter_add an inline function on UP
  sched: Remove member rt_se from struct rt_rq
  sched: Change usage of rt_rq->rt_se to rt_rq->tg->rt_se[cpu]
  sched: Remove unused update_shares_locked()
  sched: Use for_each_bit
  sched: Queue a deboosted task to the head of the RT prio queue
  sched: Implement head queueing for sched_rt
  sched: Extend enqueue_task to allow head queueing
  sched: Remove USER_SCHED
  sched: Fix the place where group powers are updated
  sched: Assume *balance is valid
  sched: Remove load_balance_newidle()
  sched: Unify load_balance{,_newidle}()
  sched: Add a lock break for PREEMPT=y
  sched: Remove from fwd decls
  sched: Remove rq_iterator from move_one_task
  ...

Fix up trivial conflicts in kernel/sched.c
2010-02-28 10:31:01 -08:00
Linus Torvalds 6556a67435 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits)
  perf_event, amd: Fix spinlock initialization
  perf_event: Fix preempt warning in perf_clock()
  perf tools: Flush maps on COMM events
  perf_events, x86: Split PMU definitions into separate files
  perf annotate: Handle samples not at objdump output addr boundaries
  perf_events, x86: Remove superflous MSR writes
  perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in()
  perf_events, x86: AMD event scheduling
  perf_events: Add new start/stop PMU callbacks
  perf_events: Report the MMAP pgoff value in bytes
  perf annotate: Defer allocating sym_priv->hist array
  perf symbols: Improve debugging information about symtab origins
  perf top: Use a macro instead of a constant variable
  perf symbols: Check the right return variable
  perf/scripts: Tag syscall_name helper as not yet available
  perf/scripts: Add perf-trace-python Documentation
  perf/scripts: Remove unnecessary PyTuple resizes
  perf/scripts: Add syscall tracing scripts
  perf/scripts: Add Python scripting engine
  perf/scripts: Remove check-perf-trace from listed scripts
  ...

Fix trivial conflict in tools/perf/util/probe-event.c
2010-02-28 10:20:25 -08:00
Linus Torvalds d25e8dbdab Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  oprofile/x86: fix msr access to reserved counters
  oprofile/x86: use kzalloc() instead of kmalloc()
  oprofile/x86: fix perfctr nmi reservation for mulitplexing
  oprofile/x86: add comment to counter-in-use warning
  oprofile/x86: warn user if a counter is already active
  oprofile/x86: implement randomization for IBS periodic op counter
  oprofile/x86: implement lsfr pseudo-random number generator for IBS
  oprofile/x86: implement IBS cpuid feature detection
  oprofile/x86: remove node check in AMD IBS initialization
  oprofile/x86: remove OPROFILE_IBS config option
  oprofile: remove EXPERIMENTAL from the config option description
  oprofile: remove tracing build dependency
2010-02-28 10:15:31 -08:00
Linus Torvalds 642c4c75a7 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (44 commits)
  rcu: Fix accelerated GPs for last non-dynticked CPU
  rcu: Make non-RCU_PROVE_LOCKING rcu_read_lock_sched_held() understand boot
  rcu: Fix accelerated grace periods for last non-dynticked CPU
  rcu: Export rcu_scheduler_active
  rcu: Make rcu_read_lock_sched_held() take boot time into account
  rcu: Make lockdep_rcu_dereference() message less alarmist
  sched, cgroups: Fix module export
  rcu: Add RCU_CPU_STALL_VERBOSE to dump detailed per-task information
  rcu: Fix rcutorture mod_timer argument to delay one jiffy
  rcu: Fix deadlock in TREE_PREEMPT_RCU CPU stall detection
  rcu: Convert to raw_spinlocks
  rcu: Stop overflowing signed integers
  rcu: Use canonical URL for Mathieu's dissertation
  rcu: Accelerate grace period if last non-dynticked CPU
  rcu: Fix citation of Mathieu's dissertation
  rcu: Documentation update for CONFIG_PROVE_RCU
  security: Apply lockdep-based checking to rcu_dereference() uses
  idr: Apply lockdep-based diagnostics to rcu_dereference() uses
  radix-tree: Disable RCU lockdep checking in radix tree
  vfs: Abstract rcu_dereference_check for files-fdtable use
  ...
2010-02-28 10:13:16 -08:00
Linus Torvalds 37d4008484 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits)
  crypto: aes_generic - Fix checkpatch errors
  crypto: fcrypt - Fix checkpatch errors
  crypto: ecb - Fix checkpatch errors
  crypto: des_generic - Fix checkpatch errors
  crypto: deflate - Fix checkpatch errors
  crypto: crypto_null - Fix checkpatch errors
  crypto: cipher - Fix checkpatch errors
  crypto: crc32 - Fix checkpatch errors
  crypto: compress - Fix checkpatch errors
  crypto: cast6 - Fix checkpatch errors
  crypto: cast5 - Fix checkpatch errors
  crypto: camellia - Fix checkpatch errors
  crypto: authenc - Fix checkpatch errors
  crypto: api - Fix checkpatch errors
  crypto: anubis - Fix checkpatch errors
  crypto: algapi - Fix checkpatch errors
  crypto: blowfish - Fix checkpatch errors
  crypto: aead - Fix checkpatch errors
  crypto: ablkcipher - Fix checkpatch errors
  crypto: pcrypt - call the complete function on error
  ...
2010-02-26 16:50:02 -08:00
Robert Richter b309a294e5 oprofile: remove EXPERIMENTAL from the config option description
OProfile is already used for a long time and no longer experimental.

Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-02-26 15:13:54 +01:00
Paul E. McKenney 8bd93a2c5d rcu: Accelerate grace period if last non-dynticked CPU
Currently, rcu_needs_cpu() simply checks whether the current CPU
has an outstanding RCU callback, which means that the last CPU
to go into dyntick-idle mode might wait a few ticks for the
relevant grace periods to complete.  However, if all the other
CPUs are in dyntick-idle mode, and if this CPU is in a quiescent
state (which it is for RCU-bh and RCU-sched any time that we are
considering going into dyntick-idle mode), then the grace period
is instantly complete.

This patch therefore repeatedly invokes the RCU grace-period
machinery in order to force any needed grace periods to complete
quickly.  It does so a limited number of times in order to
prevent starvation by an RCU callback function that might pass
itself to call_rcu().

However, if any CPU other than the current one is not in
dyntick-idle mode, fall back to simply checking (with fix to bug
noted by Lai Jiangshan).  Also, take advantage of last
grace-period forcing, the opportunity to do so noted by Steve
Rostedt.  And apply simplified #ifdef condition suggested by
Frederic Weisbecker.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-15-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 10:34:55 +01:00
Paul E. McKenney d11c563dd2 sched: Use lockdep-based checking on rcu_dereference()
Update the rcu_dereference() usages to take advantage of the new
lockdep-based checking.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-6-git-send-email-paulmck@linux.vnet.ibm.com>
[ -v2: fix allmodconfig missing symbol export build failure on x86 ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 10:34:26 +01:00
Yinghai Lu 2b633e3fac smp: Use nr_cpus= to set nr_cpu_ids early
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka
CONFIG_NR_CPUS.

Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on
normal config.

-v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of
     NR_CPUS.
-v3: add doc in kernel-parameters.txt according to Andrew.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Tony Luck <tony.luck@intel.com>
2010-02-17 17:30:22 -08:00
Yinghai Lu 773e3eb7b8 init: Move radix_tree_init() early
Prepare for using radix trees in early_irq_init().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-30-git-send-email-yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-17 17:26:33 -08:00
Ingo Molnar 6d3e0907b8 Merge branch 'sched/urgent' into sched/core
Merge reason: Merge dependent fix, update to latest -rc.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-08 08:55:46 +01:00
Eric Paris 54bb6552bd ima: initialize ima before inodes can be allocated
ima wants to create an inode information struct (iint) when inodes are
allocated.  This means that at least the part of ima which does this
allocation (the allocation is filled with information later) should
before any inodes are created.  To accomplish this we split the ima
initialization routine placing the kmem cache allocator inside a
security_initcall() function.  Since this makes use of radix trees we also
need to make sure that is initialized before security_initcall().

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-07 03:06:22 -05:00
Roland McGrath 8433646601 kconfig CROSS_COMPILE option
This adds CROSS_COMPILE as a kconfig string so you can store it in
.config.  Then you can use plain "make" in the configured kernel build
directory to do the right cross compilation without setting the
command-line or environment variable every time.

With this, you can set up different build directories for different kernel
configurations, whether native or cross-builds, and then use the simple:

	make -C /build/dir M=module-source-dir

idiom to build modules for any given target kernel, indicating which one
by nothing but the build directory chosen.

I tried a version that defaults the string with env="CROSS_COMPILE" so
that in a "make oldconfig" with CROSS_COMPILE in the environment you can
just hit return to store the way you're building it.  But the kconfig
prompt for strings doesn't give you any way to say you want an empty
string instead of the default, so I punted that.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Anibal Monsalve Salazar <anibal@debian.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-02-02 14:33:54 +01:00
Dhaval Giani 7c9414385e sched: Remove USER_SCHED
Remove the USER_SCHED feature. It has been scheduled to be removed in
2.6.34 as per http://marc.info/?l=linux-kernel&m=125728479022976&w=2

Signed-off-by: Dhaval Giani <dhaval.giani@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1263990378.24844.3.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-21 13:40:18 +01:00
Ingo Molnar 61405fea92 Merge branch 'perf/urgent' into perf/core
Merge reason: queue up dependent patch, update to -rc4

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-13 10:08:50 +01:00
Albin Tonnerre 7dd65feb6c lib: add support for LZO-compressed kernels
This patch series adds generic support for creating and extracting
LZO-compressed kernel images, as well as support for using such images on
the x86 and ARM architectures, and support for creating and using
LZO-compressed initrd and initramfs images.

Russell King said:

: Testing on a Cortex A9 model:
: - lzo decompressor is 65% of the time gzip takes to decompress a kernel
: - lzo kernel is 9% larger than a gzip kernel
:
: which I'm happy to say confirms your figures when comparing the two.
:
: However, when comparing your new gzip code to the old gzip code:
: - new is 99% of the size of the old code
: - new takes 42% of the time to decompress than the old code
:
: What this means is that for a proper comparison, the results get even better:
: - lzo is 7.5% larger than the old gzip'd kernel image
: - lzo takes 28% of the time that the old gzip code took
:
: So the expense seems definitely worth the effort.  The only reason I
: can think of ever using gzip would be if you needed the additional
: compression (eg, because you have limited flash to store the image.)
:
: I would argue that the default for ARM should therefore be LZO.

This patch:

The lzo compressor is worse than gzip at compression, but faster at
extraction.  Here are some figures for an ARM board I'm working on:

Uncompressed size: 3.24Mo
gzip  1.61Mo 0.72s
lzo   1.75Mo 0.48s

So for a compression ratio that is still relatively close to gzip, it's
much faster to extract, at least in that case.

This part contains:
 - Makefile routine to support lzo compression
 - Fixes to the existing lzo compressor so that it can be used in
   compressed kernels
 - wrapper around the existing lzo1x_decompress, as it only extracts one
   block at a time, while we need to extract a whole file here
 - config dialog for kernel compression

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Tested-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Russell King <rmk@arm.linux.org.uk>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11 09:34:04 -08:00
Steffen Klassert 16295bec63 padata: Generic parallelization/serialization interface
This patch introduces an interface to process data objects
in parallel. The parallelized objects return after serialization
in the same order as they were before the parallelization.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-01-06 19:47:10 +11:00
Li Zefan 07b139c8c8 perf events: Remove CONFIG_EVENT_PROFILE
Quoted from Ingo:

| This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE -
| it's an unnecessary Kconfig complication. If both PERF_EVENTS and
| EVENT_TRACING is enabled we should expose generic tracepoints.
|
| Nor is it limited to event 'profiling', so it has become a misnomer as
| well.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 10:33:06 +01:00
Linus Torvalds 3981e15286 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
  Makefile: Unexport LC_ALL instead of clearing it
  x86: Fix objdump version check in arch/x86/tools/chkobjdump.awk
  x86: Reenable TSC sync check at boot, even with NONSTOP_TSC
  x86: Don't use POSIX character classes in gen-insn-attr-x86.awk
  Makefile: set LC_CTYPE, LC_COLLATE, LC_NUMERIC to C
  x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA
  x86: Fix checking of SRAT when node 0 ram is not from 0
  x86, cpuid: Add "volatile" to asm in native_cpuid()
  x86, msr: msrs_alloc/free for CONFIG_SMP=n
  x86, amd: Get multi-node CPU info from NodeId MSR instead of PCI config space
  x86: Add IA32_TSC_AUX MSR and use it
  x86, msr/cpuid: Register enough minors for the MSR and CPUID drivers
  initramfs: add missing decompressor error check
  bzip2: Add missing checks for malloc returning NULL
  bzip2/lzma/gzip: pre-boot malloc doesn't return NULL on failure
2009-12-19 09:48:14 -08:00
Linus Torvalds aac3d39693 Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits)
  sched: Fix broken assertion
  sched: Assert task state bits at build time
  sched: Update task_state_arraypwith new states
  sched: Add missing state chars to TASK_STATE_TO_CHAR_STR
  sched: Move TASK_STATE_TO_CHAR_STR near the TASK_state bits
  sched: Teach might_sleep() about preemptible RCU
  sched: Make warning less noisy
  sched: Simplify set_task_cpu()
  sched: Remove the cfs_rq dependency from set_task_cpu()
  sched: Add pre and post wakeup hooks
  sched: Move kthread_bind() back to kthread.c
  sched: Fix select_task_rq() vs hotplug issues
  sched: Fix sched_exec() balancing
  sched: Ensure set_task_cpu() is never called on blocked tasks
  sched: Use TASK_WAKING for fork wakups
  sched: Select_task_rq_fair() must honour SD_LOAD_BALANCE
  sched: Fix task_hot() test order
  sched: Fix set_cpu_active() in cpu_down()
  sched: Mark boot-cpu active before smp_init()
  sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
  ...
2009-12-19 09:47:49 -08:00
Linus Torvalds 5a865c0606 Merge branch 'for-33' of git://repo.or.cz/linux-kbuild
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
  net: fix for utsrelease.h moving to generated
  gen_init_cpio: fixed fwrite warning
  kbuild: fix make clean after mismerge
  kbuild: generate modules.builtin
  genksyms: properly consider  EXPORT_UNUSED_SYMBOL{,_GPL}()
  score: add asm/asm-offsets.h wrapper
  unifdef: update to upstream revision 1.190
  kbuild: specify absolute paths for cscope
  kbuild: create include/generated in silentoldconfig
  scripts/package: deb-pkg: use fakeroot if available
  scripts/package: add KBUILD_PKG_ROOTCMD variable
  scripts/package: tar-pkg: use tar --owner=root
  Kbuild: clean up marker
  net: add net_tstamp.h to headers_install
  kbuild: move utsrelease.h to include/generated
  kbuild: move autoconf.h to include/generated
  drop explicit include of autoconf.h
  kbuild: move compile.h to include/generated
  kbuild: drop include/asm
  kbuild: do not check for include/asm-$ARCH
  ...

Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
2009-12-17 07:23:42 -08:00
Peter Zijlstra 933b0618d8 sched: Mark boot-cpu active before smp_init()
A UP machine has 1 active cpu, not having the boot-cpu in the
active map when starting the scheduler confuses things.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091216170517.423469527@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 19:01:53 +01:00
Phillip Lougher 54291362d2 initramfs: add missing decompressor error check
The decompressors return error by calling a supplied error function, and/or
by returning an error return value.  The initramfs code, however, fails to
check the exit code returned by the decompressor, and only checks the error
status set by calling the error function.

This patch adds a return code check and calls the error function.

Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
LKML-Reference: <4b26b1ef.0+ZWxT6886olqcSc%phillip@lougher.demon.co.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-15 14:04:24 -08:00
H Hartley Sweeten 196a15b4ee init/main.c: fix symbol shadows noise
The symbol 'call' is a static symbol used for initcall_debug.  This same
symbol name is used locally by a couple functions and produces the
following sparse warnings:

	warning: symbol 'call' shadows an earlier one

Fix this noise by renaming the local symbols.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:26 -08:00
Jie Zhang ea63763959 nommu: fix malloc performance by adding uninitialized flag
The NOMMU code currently clears all anonymous mmapped memory.  While this
is what we want in the default case, all memory allocation from userspace
under NOMMU has to go through this interface, including malloc() which is
allowed to return uninitialized memory.  This can easily be a significant
performance penalty.  So for constrained embedded systems were security is
irrelevant, allow people to avoid clearing memory unnecessarily.

This also alters the ELF-FDPIC binfmt such that it obtains uninitialised
memory for the brk and stack region.

Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:24 -08:00
Sam Ravnborg 273b281fa2 kbuild: move utsrelease.h to include/generated
Fix up all users of utsrelease.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Sam Ravnborg 9204595405 kbuild: move compile.h to include/generated
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Linus Torvalds 60d8ce2cd6 Merge branch 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers, init: Limit the number of per cpu calibration bootup messages
  posix-cpu-timers: optimize and document timer_create callback
  clockevents: Add missing include to pacify sparse
  x86: vmiclock: Fix printk format
  x86: Fix printk format due to variable type change
  sparc: fix printk for change of variable type
  clocksource/events: Fix fallout of generic code changes
  nohz: Allow 32-bit machines to sleep for more than 2.15 seconds
  nohz: Track last do_timer() cpu
  nohz: Prevent clocksource wrapping during idle
  nohz: Type cast printk argument
  mips: Use generic mult/shift factor calculation for clocks
  clocksource: Provide a generic mult/shift factor calculation
  clockevents: Use u32 for mult and shift factors
  nohz: Introduce arch_needs_cpu
  nohz: Reuse ktime in sub-functions of tick_check_idle.
  time: Remove xtime_cache
  time: Implement logarithmic time accumulation
2009-12-08 19:27:08 -08:00
Uwe Kleine-König 9e9868a737 sysfs: deprecated features are to help old tools not to confuse them
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-08 13:23:39 -08:00
Linus Torvalds 1557d33007 Merge git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits)
  security/tomoyo: Remove now unnecessary handling of security_sysctl.
  security/tomoyo: Add a special case to handle accesses through the internal proc mount.
  sysctl: Drop & in front of every proc_handler.
  sysctl: Remove CTL_NONE and CTL_UNNUMBERED
  sysctl: kill dead ctl_handler definitions.
  sysctl: Remove the last of the generic binary sysctl support
  sysctl net: Remove unused binary sysctl code
  sysctl security/tomoyo: Don't look at ctl_name
  sysctl arm: Remove binary sysctl support
  sysctl x86: Remove dead binary sysctl support
  sysctl sh: Remove dead binary sysctl support
  sysctl powerpc: Remove dead binary sysctl support
  sysctl ia64: Remove dead binary sysctl support
  sysctl s390: Remove dead sysctl binary support
  sysctl frv: Remove dead binary sysctl support
  sysctl mips/lasat: Remove dead binary sysctl support
  sysctl drivers: Remove dead binary sysctl support
  sysctl crypto: Remove dead binary sysctl support
  sysctl security/keys: Remove dead binary sysctl support
  sysctl kernel: Remove binary sysctl logic
  ...
2009-12-08 07:38:50 -08:00
Linus Torvalds 607781762e Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  rcu: Make RCU's CPU-stall detector be default
  rcu: Add expedited grace-period support for preemptible RCU
  rcu: Enable fourth level of TREE_RCU hierarchy
  rcu: Rename "quiet" functions
  rcu: Re-arrange code to reduce #ifdef pain
  rcu: Eliminate unneeded function wrapping
  rcu: Fix grace-period-stall bug on large systems with CPU hotplug
  rcu: Eliminate __rcu_pending() false positives
  rcu: Further cleanups of use of lastcomp
  rcu: Simplify association of forced quiescent states with grace periods
  rcu: Accelerate callback processing on CPUs not detecting GP end
  rcu: Mark init-time-only rcu_bootup_announce() as __init
  rcu: Simplify association of quiescent states with grace periods
  rcu: Rename dynticks_completed to completed_fqs
  rcu: Enable synchronize_sched_expedited() fastpath
  rcu: Remove inline from forward-referenced functions
  rcu: Fix note_new_gpnum() uses of ->gpnum
  rcu: Fix synchronization for rcu_process_gp_end() uses of ->completed counter
  rcu: Prepare for synchronization fixes: clean up for non-NO_HZ handling of ->completed counter
  rcu: Cleanup: balance rcu_irq_enter()/rcu_irq_exit() calls
  ...
2009-12-05 09:52:14 -08:00
Linus Torvalds 3e72b810e3 Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mutex: Fix missing conditions to build mutex_spin_on_owner()
  mutex: Better control mutex adaptive spinning config
  locking, task_struct: Reduce size on TRACE_IRQFLAGS and 64bit
  locking: Use __[SPIN|RW]_LOCK_UNLOCKED in [spin|rw]_lock_init()
  locking: Remove unused prototype
  locking: Reduce ifdefs in kernel/spinlock.c
  locking: Make inlining decision Kconfig based
2009-12-05 09:49:59 -08:00
Rusty Russell f066a4f6df param: don't complain about unused module parameters.
Jon confirms that recent modprobe will look in /proc/cmdline, so these
cmdline options can still be used.

See http://bugzilla.kernel.org/show_bug.cgi?id=14164

Reported-by: Adam Williamson <awilliam@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-02 15:40:07 -08:00
Randy Dunlap e9438e3193 sysfs: fix SYSFS_DEPRECATED_V2 prompt
The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it
actually enables them, so correct this confusing, backwards text.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:20 -08:00
David Howells f13a48bd79 SLOW_WORK: Move slow_work's proc file to debugfs
Move slow_work's debugging proc file to debugfs.

Signed-off-by: David Howells <dhowells@redhat.com>
Requested-and-acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 08:20:31 -08:00
Mike Travis feae3203d7 timers, init: Limit the number of per cpu calibration bootup messages
Limit the number of per cpu calibration messages by only
printing out results for the first cpu to boot.

Also, don't print "CPUx is down" as this is expected, and we
don't need 4096 reminders... ;-)

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091118002219.889552000@alcatraz.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 10:18:42 +01:00
David Howells 8fba10a42d SLOW_WORK: Allow the work items to be viewed through a /proc file
Allow the executing and queued work items to be viewed through a /proc file
for debugging purposes.  The contents look something like the following:

    THR PID   ITEM ADDR        FL MARK  DESC
    === ===== ================ == ===== ==========
      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK

In the 'THR' column, executing items show the thread they're occupying and
queued threads indicate which queue they're on.  'PID' shows the process ID of
a slow-work thread that's executing something.  'FL' shows the work item flags.
'MARK' indicates how long since an item was queued or began executing.  Lastly,
the 'DESC' column permits the owner of an item to give some information.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-11-19 18:10:51 +00:00
Eric W. Biederman bb9074ff58 Merge commit 'v2.6.32-rc7'
Resolve the conflict between v2.6.32-rc7 where dn_def_dev_handler
gets a small bug fix and the sysctl tree where I am removing all
sysctl strategy routines.
2009-11-17 01:01:34 -08:00
Thomas Gleixner 6beb000923 locking: Make inlining decision Kconfig based
commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the
selection of which lock functions are inlined based on defines in
arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION

Despite of the name __always_inline__* the lock functions can be built
out of line depending on config options. Also if the arch does not set
some inline defines the generic code might set them; again depending on
config options.

This makes it unnecessary hard to figure out when and which lock
functions are inlined. Aside of that it makes it way harder and
messier for -rt to manipulate the lock functions.

Convert the inlining decision to CONFIG switches. Each lock function
is inlined depending on CONFIG_INLINE_*. The configs implement the
existing dependencies. The architecture code can select ARCH_INLINE_*
to signal that it wants the corresponding lock function inlined.
ARCH_INLINE_* is necessary as Kconfig ignores "depends on"
restrictions when a config element is selected.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20091109151428.504477141@linutronix.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-13 20:53:28 +01:00
Linus Torvalds 26a9ba160f Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix permission checks
  perf_events: Fix some typo in the perf events config description
2009-11-11 11:29:34 -08:00
Eric W. Biederman 26a7034b40 sysctl: Reduce sys_sysctl to a compatibility wrapper around /proc/sys
To simply maintenance and to be able to remove all of the binary
sysctl support from various subsystems I have rewritten the binary
sysctl code as a compatibility wrapper around proc/sys.

The code is built around a hard coded table based on the table
in sysctl_check.c that lists all of our current binary sysctls
and provides enough information to convert from the sysctl
binary input into into ascii and back again.  New in this
patch is the realization that the only dynamic entries
that need to be handled have ifname as the asscii string
and ifindex as their ctl_name.

When a sys_sysctl is called the code now looks in the
translation table converting the binary name to the
path under /proc where the value is to be found.  Opens
that file, and calls into a format conversion wrapper
that calls fop->read and then fop->write as appropriate.

Since in practice the practically no one uses or tests
sys_sysctl rewritting the code to be beautiful is a little
silly.  The redeeming merit of this work is it allows us to
rip out all of the binary sysctl syscall support from
everywhere else in the tree.  Allowing us to remove
a lot of dead (after this patch) and barely maintained code.

In addition it becomes much easier to optimize the sysctl
implementation for being the backing store of /proc/sys,
without having to worry about sys_sysctl.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-11 00:42:05 -08:00