There are 4 USB controllers on MT8195, the controllers (IP1~IP3,
exclude IP0) have a wrong default SOF/ITP interval which is
calculated from the frame counter clock 24Mhz by default, but
in fact, the frame counter clock is 48Mhz, so we should set
the accurate interval according to 48Mhz for those controllers.
Note: the first controller no need set it.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-9-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use @bw_budget_table[] to update fs bus bandwidth due to
not all microframes consume @bw_cost_per_microframe, see
setup_sch_info().
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-6-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bus bandwidth array access is based on esit, increase one
will cause out-of-bounds issue; for example, when esit is
XHCI_MTK_MAX_ESIT, will overstep boundary.
Fixes: 7c986fbc16 ("usb: xhci-mtk: get the microframe boundary for ESIT")
Cc: <stable@vger.kernel.org>
Reported-by: Stan Lu <stan.lu@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to disable specific usb2 host ports, it's useful when
a usb2 port is disabled on some platforms, but enabled on others
for the same SoC.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are 4 USB controllers on MT8195, the controllers (IP1~IP3,
exclude IP0) have a wrong default SOF/ITP interval which is
calculated from the frame counter clock 24Mhz by default, but
in fact, the frame counter clock is 48Mhz, so we should set
the accurate interval according to 48Mhz. Here add a new compatible
for MT8195, it's also supported in driver. But the first controller
(IP0) has no such issue, we prefer to use generic compatible,
e.g. mt8192's compatible.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to disable specific usb2 host ports, it's useful when
a usb2 port is disabled on some platforms, but enabled on others for
the same SoC, another case is that the different package may support
different number of ports.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error occurs after a successful 'clk_prepare_enable()' call, it must
be undone by a corresponding 'clk_disable_unprepare()' call.
This call is already present in the remove function.
Add this call in the error handling path and reorder the code so that the
'clk_prepare_enable()' call happens later in the function.
The goal is to have as much managed resources functions as possible
before the 'clk_prepare_enable()' call in order to keep the error handling
path simple.
While at it, remove the now unneeded 'clk' variable.
Fixes: c87dca0478 ("usb: bdc: Add clock enable for new chips with a separate BDC clock")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f8a4a6897deb0c8cb2e576580790303550f15fcd.1629314734.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If no suitable DMA configuration is available, a previous 'bdc_phy_init()'
call must be undone by a corresponding 'bdc_phy_exit()' call.
Branch to the existing error handling path instead of returning
directly.
Fixes: cc29d4f677 ("usb: bdc: Add support for USB phy")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0c5910979f39225d5d8fe68c9ab1c147c68ddee1.1629314734.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I find the patch introduce some issues, e.g.
1. oops happens when xhci_gen_setup() failed, and hash is not init
but try to destroy it;
2. memory leakage happens when fail to insert ep, need free sch_ep,
or insert ep after insert int list;
3. memory leakage happens when fail to allocate sch_array, need destroy
rhashtable;
4. it's better to check ep->hcpriv when drop ep;
so prefer to revert this patch, and resend it after the issues are fixed.
This reverts commit b873120995.
Cc: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210820065913.64490-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As discussed in following patch:
https://patchwork.kernel.org/patch/12420339
No need calculate number of uframes again, but should use value
form check_sch_tt(), if we plan to remove extra CS, also can do
it in check_sch_tt(). So revert this patch, and prepare to send
new patch for it.
This reverts commit 548011957d.
Cc: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210820065913.64490-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_USB_ISP1761_UDC is not enabled the udc_enabled variable is
never used since it is short circuited before in the logic operations.
This would trigger the following warning by clang analyzer:
drivers/usb/isp1760/isp1760-core.c:490:2: warning: Value stored to 'udc_enabled' is never read [clang-analyzer-deadcode.DeadStores]
udc_enabled = ((devflags & ISP1760_FLAG_ISP1763) ||
^
drivers/usb/isp1760/isp1760-core.c:490:2: note: Value stored to 'udc_enabled' is never read
Just swap the other of the operands in the logic operations.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210819180929.1327349-6-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even though it is not expected, and would trigger a WARN_ON, killing a
transfer in a uninitialized slot this sequence is warned by clang
analyzer, twice:
drivers/usb/isp1760/isp1760-hcd.c:1976:18: warning: The result of the left shift is undefined because the right operand is negative [clang-analyzer-core.UndefinedBinaryOperatorResult]
skip_map |= (1 << qh->slot);
drivers/usb/isp1760/isp1760-hcd.c:1983:18: warning: The result of the left shift is undefined because the right operand is negative [clang-analyzer-core.UndefinedBinaryOperatorResult]
skip_map |= (1 << qh->slot);
Only set skip map if slot is active.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210819180929.1327349-5-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not really need to reset retval before get used bellow.
This will avoid the clang-analyzer warning:
drivers/usb/isp1760/isp1760-hcd.c:1919:2: warning: Value stored to 'retval' is never read [clang-analyzer-deadcode.DeadStores]
retval = 0;
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210819180929.1327349-4-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When checking if we need one more packet on a bulk pipe we may, even
though not probable at all, get there with a zero maxpacketsize.
In that case for sure no packet, no even a one more, will be
allocated.
This will clean the clang-analyzer warning:
drivers/usb/isp1760/isp1760-hcd.c:1856:38: warning: Division by zero [clang-analyzer-core.DivideZero]
&& !(urb->transfer_buffer_length %
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210819180929.1327349-3-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not care about the return value of that read between the
scratch register write and read, we really just want to make sure that
the pattern in the bus get changed to make sure we are testing
correctly the scratch pattern.
Clang-analyzer complains about the never read scratch variable:
>> drivers/usb/isp1760/isp1760-hcd.c:735:2: warning: Value stored to 'scratch' is never read [clang-analyzer-deadcode.DeadStores]
scratch = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
Just ignore the return value of that CHIP_ID_HIGH read, add more
information to the comment above why we are doing this. And as at it,
just do a small format change in the error message bellow.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210819180929.1327349-2-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The description for "qlen" is missing, and there is a description
for this parameter in "Documentation/usb/gadget_printer.rst"
Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210821142647.2904-1-jj251510319013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a remote usb device is attached to the local Virtual USB
Host Controller Root Hub port, the bound device driver may send
a port reset command.
vhci_hcd accepts port resets only when the device doesn't have
port address assigned to it. When reset happens device is in
assigned/used state and vhci_hcd rejects it leaving the port in
a stuck state.
This problem was found when a blue-tooth or xbox wireless dongle
was passed through using usbip.
A few drivers reset the port during probe including mt76 driver
specific to this bug report. Fix the problem with a change to
honor reset requests when device is in used state (VDEV_ST_USED).
Reported-and-tested-by: Michael <msbroadf@gmail.com>
Suggested-by: Michael <msbroadf@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cleanup code for unlink_tx and unlink_rx lists is almost the same.
So, extract it into a new function and call it for both unlink_rx and
unlink_tx. Also, remove unnecessary log messages.
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210820190122.16379-3-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If IRQ occurs between calling dsps_setup_optional_vbus_irq()
and dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.
The patch puts initializing of neccesery data before registration
of the interrupt handler.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819163323.17714-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMD's latest platforms has DWC3 controller. Add the PCI ID and
properties for the same.
Signed-off-by: Nehal Bakulchandra Shah <Nehal-Bakulchandra.shah@amd.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20210823184449.2796184-2-Nehal-Bakulchandra.shah@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If IRQ occurs between calling devm_request_threaded_irq() and
initializing dwc3_imx->dwc3, then null pointer dereference occurs
since dwc3_imx->dwc3 is used in dwc3_imx8mp_interrupt().
The patch puts registration of the interrupt handler after
initializing of neccesery data.
Found by Linux Driver Verification project (linuxtesting.org).
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819154818.18334-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ehci_orion_drv_probe() did not account for possible errors of
clk_prepare_enable() that in particular could cause invocation of
clk_disable_unprepare() on clocks that were not prepared/enabled yet,
e.g. in remove or on handling errors of usb_add_hcd() in probe. Though,
there were several patches fixing different issues with clocks in this
driver, they did not solve this problem.
Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe()
to avoid calls of clk_disable_unprepare() without previous successful
invocation of clk_prepare_enable().
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 8c869edaee ("ARM: Orion: EHCI: Add support for enabling clocks")
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Link: https://lore.kernel.org/r/20210825170902.11234-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we register two usb buses for each xHC, and systems with several
hosts are more and more common it is getting hard to follow the
flow of debug messages without knowing which bus they belong to
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add more debugging messages to follow what happends to a URB internally
in special cases like URB cancel, halted endpoints and endpoint reset.
Helps tracking issues like URB never given back by host.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5d5323a6f3.
That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.
Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2
After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.
Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.
exit latency calculations have been revised since then
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only TDs with status TD_CLEARING_CACHE will be given back after
cache is cleared with a set TR deq command.
xhci_invalidate_cached_td() failed to set the TD_CLEARING_CACHE status
for some cancelled TDs as it assumed an endpoint only needs to clear the
TD it stopped on.
This isn't always true. For example with streams enabled an endpoint may
have several stream rings, each stopping on a different TDs.
Note that if an endpoint has several stream rings, the current code
will still only clear the cache of the stream pointed to by the last
cancelled TD in the cancel list.
This patch only focus on making sure all canceled TDs are given back,
avoiding hung task after device removal.
Another fix to solve clearing the caches of all stream rings with
cancelled TDs is needed, but not as urgent.
This issue was simultanously discovered and debugged by
by Tao Wang, with a slightly different fix proposal.
Fixes: 674f8438c1 ("xhci: split handling halted endpoints into two steps")
Cc: <stable@vger.kernel.org> #5.12
Reported-by: Tao Wang <wat@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes static char buffer usage in the following decode functions:
xhci_decode_ctrl_ctx()
xhci_decode_slot_context()
xhci_decode_usbsts()
xhci_decode_doorbell()
xhci_decode_ep_context()
Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.
Minor changes are needed in other xhci code as these functions are also
used elsewhere
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes static char buffer usage in the following decode functions:
xhci_decode_trb()
xhci_decode_ptortsc()
Caller must provide a buffer to use.
In tracing use __get_str() as recommended to pass buffer.
Minor chanes are needed in xhci debugfs code as these functions are also
used there. Changes include moving XHCI_MSG_MAX definititon from
xhci-trace.h to xhci.h
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f_hid provides the OUT Endpoint as only way for receiving reports
from the host. SETUP/SET_REPORT method is not supported, and this causes
a number of compatibility problems with various host drivers, especially
in the case of keyboard emulation using f_hid.
- Some hosts do not support the OUT Endpoint and ignore it,
so it becomes impossible for the gadget to receive a report
from the host. In the case of a keyboard, the gadget loses
the ability to receive the status of the LEDs.
- Some BIOSes/UEFIs can't work with HID devices with the OUT Endpoint
at all. This may be due to their bugs or incomplete implementation
of the HID standard.
For example, absolutely all Apple UEFIs can't handle the OUT Endpoint
if it goes after IN Endpoint in the descriptor and require the reverse
order (OUT, IN) which is a violation of the standard.
Other hosts either do not initialize gadgets with a descriptor
containing the OUT Endpoint completely (like some HP and DELL BIOSes
and embedded firmwares like on KVM switches), or initialize them,
but will not poll the IN Endpoint.
This patch adds configfs option no_out_endpoint=1 to disable
the OUT Endpoint and allows f_hid to receive reports from the host
via SETUP/SET_REPORT.
Previously, there was such a feature in f_hid, but it was replaced
by the OUT Endpoint [1] in the commit 99c5150058 ("usb: gadget: hidg:
register OUT INT endpoint for SET_REPORT"). So this patch actually
returns the removed functionality while making it optional.
For backward compatibility reasons, the OUT Endpoint mode remains
the default behaviour.
- The OUT Endpoint mode provides the report queue and reduces
USB overhead (eliminating SETUP routine) on transmitting a report
from the host.
- If the SETUP/SET_REPORT mode is used, there is no report queue,
so the userspace will only read last report. For classic HID devices
like keyboards this is not a problem, since it's intended to transmit
the status of the LEDs and only the last report is important.
This mode provides better compatibility with strange and buggy
host drivers.
Both modes passed USBCV tests. Checking with the USB protocol analyzer
also confirmed that everything is working as it should and the new mode
ensures operability in all of the described cases.
Link: https://www.spinics.net/lists/linux-usb/msg65494.html [1]
Reviewed-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Maxim Devaev <mdevaev@gmail.com>
Link: https://lore.kernel.org/r/20210821134004.363217-1-mdevaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following Thunderbolt/USB4 changes for the v5.15 merge
window:
* Include authorized value in the KOBJ_CHANGE event of a device router
* A couple of improvements to get the driver working also with the AMD
USB4 host controller.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=1bPR
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.15 merge window
This includes following Thunderbolt/USB4 changes for the v5.15 merge
window:
* Include authorized value in the KOBJ_CHANGE event of a device router
* A couple of improvements to get the driver working also with the AMD
USB4 host controller.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix port linking by checking all adapters
thunderbolt: Do not read control adapter config space
thunderbolt: Handle ring interrupt by reading interrupt status register
thunderbolt: Add vendor specific NHI quirk for auto-clearing interrupt status
thunderbolt: Add authorized value to the KOBJ_CHANGE uevent
- Fix random crashes on some 32-bit CPUs by adding isync() after locking/unlocking KUEP
- Fix intermittent crashes when loading modules with strict module RWX
- Fix a section mismatch introduce by a previous fix.
Thanks to: Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo Opsfelder Araújo,
Nathan Chancellor, Stan Johnson.
-----BEGIN PGP SIGNATURE-----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=K2B0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix random crashes on some 32-bit CPUs by adding isync() after
locking/unlocking KUEP
- Fix intermittent crashes when loading modules with strict module RWX
- Fix a section mismatch introduce by a previous fix.
Thanks to Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo
Opsfelder Araújo, Nathan Chancellor, and Stan Johnson.
h# -----BEGIN PGP SIGNATURE-----
* tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix set_memory_*() against concurrent accesses
powerpc/32s: Fix random crashes by adding isync() after locking/unlocking KUEP
powerpc/xive: Do not mark xive_request_ipi() as __init
- Make the regulator state match the GDSC power domain state at boot
on Qualcomm SoCs so that the regulator isn't turned off
inadvertently.
- Fix earlycon on i.MX6Q SoCs
-----BEGIN PGP SIGNATURE-----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=EGjz
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Make the regulator state match the GDSC power domain state at boot on
Qualcomm SoCs so that the regulator isn't turned off inadvertently.
- Fix earlycon on i.MX6Q SoCs
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gdsc: Ensure regulator init state matches GDSC state
clk: imx6q: fix uart earlycon unwork
Here are some small driver fixes for 5.14-rc7.
They consist of:
- revert for an interconnect patch that was found to have
problems.
- ipack tpci200 driver fixes for reported problems
- slimbus messaging and ngd fixes for reported problems.
All are small and have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYSEfhw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylxAQCfYvG2nCMkIvBi7MXNwRS0go5YJyAAn3RprTCU
V7dduATGH8zJ4u6AOdtg
=Uq3v
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 5.14-rc7.
They consist of:
- revert for an interconnect patch that was found to have problems
- ipack tpci200 driver fixes for reported problems
- slimbus messaging and ngd fixes for reported problems
All are small and have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ipack: tpci200: fix memory leak in the tpci200_register
ipack: tpci200: fix many double free issues in tpci200_pci_probe
slimbus: ngd: reset dma setup during runtime pm
slimbus: ngd: set correct device for pm
slimbus: messaging: check for valid transaction id
slimbus: messaging: start transaction ids from 1 instead of zero
Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate"
Here is a single USB typec tcpm fix for a reported problem for 5.14-rc7.
It showed up in 5.13 and resolves an issue that Hans found. It has been
in linux-next this week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYSEgIQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymZpQCfeD9XR0ExAJgn7E0sNuLaOi2BxmUAn3Eu2IFu
dFcSEpQtg23mY6aBFWfH
=7kfD
-----END PGP SIGNATURE-----
Merge tag 'usb-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"Here is a single USB typec tcpm fix for a reported problem for
5.14-rc7. It showed up in 5.13 and resolves an issue that Hans found.
It has been in linux-next this week with no reported problems"
* tag 'usb-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Fix VDMs sometimes not being forwarded to alt-mode drivers
* A fix to the sifive-l2-cache device tree bindings, for json-schema
compatibility. This does not change the intended behavior of the
binding.
* A fix to avoid improperly freeing necessary resources during early
boot.
-----BEGIN PGP SIGNATURE-----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=xEwN
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix the sifive-l2-cache device tree bindings for json-schema
compatibility. This does not change the intended behavior of the
binding.
- avoid improperly freeing necessary resources during early boot.
* tag 'riscv-for-linus-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix a number of free'd resources in init_resources()
dt-bindings: sifive-l2-cache: Fix 'select' matching
- fix use after free of zpci_dev in pci code
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmEgv1cACgkQjYWKoQLX
FBgJ/gf+PXb5Eanf0xz/9u1q2c3wf1kVAbhr1vEiPQK3JCNyyN0ZDPq2IV27nipz
ivGc8kSFlu+G4/otNfbcWr8hswuLUvplV/E5xwTFCy//tIo7vMQDKGJ7Wkjy2Eql
agmUg6umZNL4ErA4CORQQpkW9S0PDmK0BDjbDM93EGiFskt1vu28asBOe3ulHQ6n
qH1ovvLLicB6wz5fJ1Ie3HRT+sQiyMBIIXBnSSt8eLqN4Wc+Nmv1J9I6+dLBWWVf
N3V4xAZBmJQKHKkMw0WRXs+pnT8H2X92x6sjuRLqU/PeVLQuw4opY6Rsmhm08iJC
boGZVuIVljed7d5xy3FTBrbzJ27beQ==
=nwyD
-----END PGP SIGNATURE-----
Merge tag 's390-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Vasily Gorbik:
- fix use after free of zpci_dev in pci code
* tag 's390-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix use after free of zpci_dev
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEES8DXskRxsqGE6vXTAA5oQRlWghUFAmEg5JwTHGpsYXl0b25A
a2VybmVsLm9yZwAKCRAADmhBGVaCFfX3D/94AsPqwbnIyLgP2KjoltTKtnSsOZba
tzTKwrA7vPB9b0aFg0i42omwRtGQk5jPaB8J+tBx+oc/JjO+Dpj5FOXOI9PjFr//
2zXBuMdvYWaPlsl9nw5dFzhybdPnv+HgNXA8PRqy/DifU7/oLWxHzQ4sGvr1XXNc
vow5KzLe1K4R+hQBwqKLh/9VVE4+foVTAwXWcFBi/RrDf5X97BF7s98JYsNxfpbn
EYSyLr818TCUlivAUzx+y0JD+qUknZLuNYWZ2HkYvI29y5h1gUCVmn1orlCDdDq/
G3SCF8M66l4xGW+bpzrEabqIDl+0IWhX+grU+UVdiMH4YuXmY4HPdNgKYIpJolyy
zdg8cCO3OAHTJiwkj5jSfxFHQnzPr58LSQGDfrIrNjcDKlQbx3c+8R5yMy7Ar7jZ
XAM6h88PAuBknTDWBQogZtuSqKbV8D2LsAUVgRKA7iKSwYXXUmZdW+UDiOavsHmg
n2fbi1sPP7woQKyXzFddwxG3+2Nzby8BE7xuyHTXdOrQJNE1PvICH+WVo2m8+FCe
uLKLXNf4UECO2MaSyd6k90v3AVty4u1EDTbitgcERztWGzazZdTVlmRdpwy35V+B
wskKALzjGgqFoSwkEAnXQdk4+Gk9EtnrXD+HYfmxGYKk87fOBCgJtqDWYw3RHK7n
giBfvji9HK3R8A==
=xZLO
-----END PGP SIGNATURE-----
Merge tag 'locks-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull mandatory file locking deprecation warning from Jeff Layton:
"As discussed on the list, this patch just adds a new warning for folks
who still have mandatory locking enabled and actually mount with '-o
mand'. I'd like to get this in for v5.14 so we can push this out into
stable kernels and hopefully reach folks who have mounts with -o mand.
For now, I'm operating under the assumption that we'll fully remove
this support in v5.15, but we can move that out if any legitimate
users of this facility speak up between now and then"
* tag 'locks-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs: warn about impending deprecation of mandatory locks
-----BEGIN PGP SIGNATURE-----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=DGKg
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-08-20' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Three fixes from Ming Lei that should go into 5.14:
- Fix for a kernel panic when iterating over tags for some cases
where a flush request is present, a regression in this cycle.
- Request timeout fix
- Fix flush request checking"
* tag 'block-5.14-2021-08-20' of git://git.kernel.dk/linux-block:
blk-mq: fix is_flush_rq
blk-mq: fix kernel panic during iterating over flush request
blk-mq: don't grab rq's refcount in blk_mq_check_expired()
-----BEGIN PGP SIGNATURE-----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=/PEi
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.14-2021-08-20' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few small fixes that should go into this release:
- Fix never re-assigning an initial error value for io_uring_enter()
for SQPOLL, if asked to do nothing
- Fix xa_alloc_cycle() return value checking, for cases where we have
wrapped around
- Fix for a ctx pin issue introduced in this cycle (Pavel)"
* tag 'io_uring-5.14-2021-08-20' of git://git.kernel.dk/linux-block:
io_uring: fix xa_alloc_cycle() error return value check
io_uring: pin ctx on fallback execution
io_uring: only assign io_uring_enter() SQPOLL error in actual error case
We've had CONFIG_MANDATORY_FILE_LOCKING since 2015 and a lot of distros
have disabled it. Warn the stragglers that still use "-o mand" that
we'll be dropping support for that mount option.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
We currently check for ret != 0 to indicate error, but '1' is a valid
return and just indicates that the allocation succeeded with a wrap.
Correct the check to be for < 0, like it was before the xarray
conversion.
Cc: stable@vger.kernel.org
Fixes: 61cf93700f ("io_uring: Convert personality_idr to XArray")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Prevent confusing messages from being printed if the PRMT table
is not present or there are no PRM modules (Aubrey Li).
- Fix the handling of suspend-to-idle entry and exit in the case
when the Microsoft UUID is used with the Low-Power S0 Idle _DSM
interface (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmEgAlESHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxqtUP/17Ij8yvXGV2INb2S744FyLgvjk0FdgZ
xcRhqEdYdPVqaZ75myTo+pSl7uArusO5HrKG4nRx7ATWovpb6+xK9H+ZmxyZfDkx
Y1tb4kM3ms17JOFs8KGFtcQA9V+qJZPK7JRXGaVw9rh1B7fAf/8T/gKH2/9Yh2hn
F0QrZUo0ihvcRBGeznoT/LxHy4hs5NEaEKf4AUcwdkOFPl/T+HspUESXY9SgVK4p
jKdumPe9ws/GukiLsRFNMPCj73W4Ejab7E4JqCWfvFyAkDih0Ud9MPNpdCb2nxhl
XJb1TGkXuW7PR2K+lgJBWTgRUmf4K/AbH3v7dR0B33PQfQru+BP9X6x8dDBn47Uu
Etpoxoh8is+AQ66x3yc8P4dWH297/zF9XkYGr5S9y73QJFs9+UKDTpZNIEKrRllF
sHCAueZmj45f3vjJeoNBzbOg6cu/TPNqPizGUphQU4t6SMEbCMU8sAlq12lLCM+4
doQDq7nS4x2hYpDSsR8m+61TNdzclsa64L2AZGUuwzFht2EqHt+aKpzv3cVS3rES
M8Q1w3ViTmOEKp4SlfRNaFh0NUDT7/kH+i7UzwFMqvny/CVbW0LX50RCois+bYMQ
3wUUCOMwGgmdIe+/LkiFV+deKcETR2bsFPbIdmvzjqCU5AhQRS8ihwKeZk5ozjnM
Ae70TtKyM1R7
=GBtH
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two mistakes in new code.
Specifics:
- Prevent confusing messages from being printed if the PRMT table is
not present or there are no PRM modules (Aubrey Li).
- Fix the handling of suspend-to-idle entry and exit in the case when
the Microsoft UUID is used with the Low-Power S0 Idle _DSM
interface (Mario Limonciello)"
* tag 'acpi-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Invert Microsoft UUID entry and exit
ACPI: PRM: Deal with table not present or no module found