Without WEXT_PRIV set the driver fails to build due to unknown fields in
the iw_handler_def struct.
Those fields are enclosed in WEXT_PRIV conditionals in the prototype
of iw_handler_def in include/net/iw_handler.h
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a NULL test to check wether kmalloc was successful or
not.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
`!' has a higher precedence than `&' so parentheses are required.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The module now only compiles inside mainline, so remove the comments
about different versions of the kernel it can be used with. Also
update comments about building with debug enabled and how to use the
VIS data now that it no longer natively outputs dot or JSON.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since pohmelfs isn't tied to a single block device, it needs to setup a
backing dev like nfs/btrfs/etc do.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
err_out_put is for when the netfs_trans_alloc() succeeded.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all coding style issues and some spelling mistakes.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There was a buffer overflow in the original code. rf_path was 2 and it should
have been only 0 or 1.
I don't have the hardware for this, so I can't test it.
Looking at the code, there are two almost identical sections for updating the
hal variables. The first one was clearly wrong and had the array overflow as
well. The second one looked correct. I decided to use the second section as
is except for whitespace changes.
The differences between the two original sections:
1) The second one had more debug output.
2) The second one looped over rf_path instead of corrupting data.
3) The second one had these additional assigments.
if (rf_path == 0) {
priv->TxPowerLevelOFDM24G[i] = priv->RfTxPwrLevelOfdm1T[rf_path][i] ;
priv->TxPowerLevelCCK[i] = priv->RfTxPwrLevelCck[rf_path][i];
}
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Jerry chuang <wlanfae@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial, use the %pM kernel extension to display the MAC address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Olaf Hartmann <o.hartmann@telovital.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A 33 char ESSID is too long and it could cause a buffer overflow
a couple lines below when we put a NULL terminator on the end.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
medusa_set_videostandard() takes the lock but it always drops it before
returning.
This was found with a static checker and compile tested only. :/
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The check for dio_num_asics is used to determine if there is more than 1 irq.
If it is false then irq[1] is past the end of the array.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove compatibility code as this is not an older version of the kernel.
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sizeof() returns a size_t but the other types involved
are unsigned long, so using min() results in a warning.
As sizeof() is called on an 11 character buffer defined
immediately above unsigned long is obviously wide enough
for the result.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ieee80211_crypto_tkip_exit(), ieee80211_crypto_deinit() and
ieee80211_crypto_ccmp_exit() are called by ieee80211_rtl_init()
which are in section __init, so they can't be in section __exit.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
$ make CONFIG_DEBUG_SECTION_MISMATCH=y
WARNING: drivers/staging/rt2870/rt2870sta.o(.text+0x2f4c5): Section
mismatch in reference from the function rtusb_probe() to the function .devinit.text:rt2870_probe()
The function rtusb_probe() references
the function __devinit rt2870_probe().
This is often because rtusb_probe lacks a __devinit
annotation or the annotation of rt2870_probe is wrong.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The use of pci_find_device() is deprecated.
Signed-off-by: Simon Horman <horms@verge.net.au>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The HV core mucks around with specific irqs and other low-level stuff
and takes forever to determine that it really shouldn't be running on a
machine. So instead, trigger off of the DMI system information and
error out much sooner. This also allows the module loading tools to
recognize that this code should be loaded on this type of system.
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This allows the HV core to be properly found and autoloaded
by the system tools.
It uses the Microsoft virtual VGA device to trigger this.
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the Channel.c file that fixes up a brace
warning found by checkpatch.pl
Signed-off-by: Chris Nicholson <chris.nicholson@cnick.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename struct device_context and re-arrange the fields inside.
Rename struct device_context to struct vm_device, and move struct device
field to the end according to Document/driver-model standard.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Provide proper versioning information for all HV drivers.
With removal of build time/date/and Minor number as requested by Greg KH
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyang@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the RingBuffer.c file that corrects various coding style
warnings and errors found by checkpatch.pl
[ The real solution here is to get rid of this file entirely, and use the
kernel's internal ring buffer api, but until then, make these changes so as to
make checkpatch.pl happy, and keep others from continuously sending this type
of patch. - gkh]
Signed-off-by: Craig Bartlett <c-bartlett@hotmail.co.uk>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Nicolas Palix <npalix@diku.dk>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed legacy XEN layer from hypervisor setup, and made sure only
Hyper-V is Is a valid hypervisor to run on.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback only calls one function, so just call the function
instead, no need for indirection at all.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the callback pointer was removed, we can remove
the code itself, as it is never used.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This callback was never called, so delete the thing.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A non-integer changes the aggregation mode. Therefore this patch changes
the behaviour to explicitly check strict_strtoul()'s return code.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since we are now part of mainline, we don't need compat.h to allow
building of the module with old versions of the kernel.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
printk() since kernel version 2.6.29 has supported printing MAC
addresses directly, as an extension to the %p processing. This patch
makes use of this for printk() and bat_dbg(). This will remove the
overhead of using addr_to_string() which is normally never actually
output.
Fixed a typo found by Gus Wirth.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some embedded devices have very limited sources of entropy for the
random number generator. It has been observed that the random MAC
address on the interface bat0 is not always random. When testing with
a collection of identical hardware, sometimes the bat0 device the same
MAC address on multiple devices, causing mayhem. This patch allows the
MAC address to be set by the user.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the (ugly and racy) packet receiving thread and the
kernel socket usage. Instead, packets are received directly by registering
the ethernet type and handling skbs instead of self-allocated buffers.
Some consequences and comments:
* we don't copy the payload data when forwarding/sending/receiving data
anymore. This should boost performance.
* packets from/to different interfaces can be (theoretically) processed
simultaneously. Only the big originator hash lock might be in the way.
* no more polling or sleeping/wakeup/scheduling issues when receiving
packets
* this might introduce new race conditions.
* aggregation and vis code still use packet buffers and are not (yet)
converted.
* all spinlocks were converted to irqsave/restore versions to solve
some lifelock issues when preempted. This might be overkill, some
of these locks might be reverted later.
* skb copies are only done if neccesary to avoid overhead
performance differences:
* we made some "benchmarks" with intel laptops.
* bandwidth on Gigabit Ethernet increased from ~500 MBit/s to ~920 MBit/s
* ping latency decresed from ~2ms to ~0.2 ms
I did some tests on my 9 node qemu environment and could confirm that
usual sending/receiving, forwarding, vis, batctl ping etc works.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Acked-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
there are some kmallocs left which are not checked whether they succeeds or
not, which might lead to corrupted data structures if the system memory is
full. This patch should clean up the remaining unchecked kmalloc()s.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The /proc vis file was used to enable/disable the vis server and to output
the vis data at the same time. This behaviour was confusing and lacked a
proper method to display the current vis server status.
This patch seperates the 2 functionalities:
* use vis_server to enable/disable the vis server and to retrieve its status
* use vis_data to retrieve the vis raw data (if the server is enabled)
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batman-adv used to export the vis data using different formats that were
switchable via /proc/net/batman-adv/vis_format. The various formats moved
to user space and rendered this configuration switch useless.
Signed-off-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Peter Huewe
Alexander Beregalov
Roel Kluin
Andrew Lunn
Evgeniy Polyakov
Dan Carpenter
Joe Perches
Alan Cox
Benjamin Adolphi
H Hartley Sweeten
C yp
Simon Horman
Greg Kroah-Hartman
Chris Nicholson
Haiyang Zhang
Hank Janssen
C. Bartlett
Linus Lüssing
Simon Wunderlich
Marek Lindner