Граф коммитов

10 Коммитов

Автор SHA1 Сообщение Дата
Dave Airlie d7b273685f Merge branch 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
Here are some development updates for the Synopsis Designware HDMI driver,
which clean up some of the code, and start preparing to add audio support
to the driver.  This series of patches are based on a couple of dependent
commits from the ALSA tree.

Briefly, the updates are:
- move comments which should have moved with the phy values to the IMX
  part of the driver.
- clean up the phy configuration: to all lookups before starting to
  program the phy.
- clean up the HDMI clock regenerator code
- use the drm_hdmi_avi_infoframe_from_display_mode() helper which allows
  the code to be subsequently simplified
- remove the unused 'regmap' pointer in struct dw_hdmi
- use the bridge drm device rather than the connector (we're the bridge
  code)
- remove private hsync/vsync/interlaced flags, getting them from the
  DRM mode structure instead.
- implement interface functions to support audio - setting the audio
  sample rate, and enabling the audio clocks.
- removal of broken pixel repetition support
- cleanup DVI vs HDMI sink handling
- enable audio only if connected device supports audio
- avoid double-enabling bridge in the sink path (once in mode_set, and
  again in commit)
- rename mis-named dw_hdmi_phy_enable_power()
- fix bridge enable/disable handing, so a plug-in event doesn't
  reconfigure the bridge if DRM has disabled the output
- fix from Vladimir Zapolskiy for the I2CM_ADDRESS macro name

These are primerily preparitory patches for the AHB audio driver and
the I2S audio driver (from Rockchip) for this IP.

* 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  drm: bridge/dw_hdmi: fix register I2CM_ADDRESS register name
  drm: bridge/dw_hdmi: fix phy enable/disable handling
  drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power()
  drm: bridge/dw_hdmi: avoid enabling interface in mode_set
  drm: bridge/dw_hdmi: enable audio only if sink supports audio
  drm: bridge/dw_hdmi: clean up HDMI vs DVI mode handling
  drm: bridge/dw_hdmi: don't support any pixel doubled modes
  drm: bridge/dw_hdmi: remove pixel repetition setting for all VICs
  drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio
  drm: bridge/dw_hdmi: introduce interface to setting sample rate
  drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced
  drm: bridge/dw_hdmi: use our own drm_device
  drm: bridge/dw_hdmi: remove unused 'regmap' struct member
  drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little
  drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode()
  drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator()
  drm: bridge/dw_hdmi: clean up phy configuration
  drm: imx/dw_hdmi: move phy comments
  drm/edid: add function to help find SADs
2015-08-27 13:01:57 +10:00
Russell King b90120a966 drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio
iMX6 devices suffer from an errata (ERR005174) where the audio FIFO can
be emptied while it is partially full, resulting in misalignment of the
audio samples.

To prevent this, the errata workaround recommends writing N as zero
until the audio FIFO has been loaded by DMA.  Writing N=0 prevents the
HDMI bridge from reading from the audio FIFO, effectively disabling
audio.

This means we need to provide the audio driver with a pair of functions
to enable/disable audio.  These are dw_hdmi_audio_enable() and
dw_hdmi_audio_disable().

A spinlock is introduced to ensure that setting the CTS/N values can't
race, ensuring that the audio driver calling the enable/disable
functions (which are called in an atomic context) can't race with a
modeset.

Tested-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-18 11:27:15 +01:00
Russell King b5814fff27 drm: bridge/dw_hdmi: introduce interface to setting sample rate
Introduce dw_hdmi_set_sample_rate(), which allows us to configure the
audio sample rate, setting the CTS/N values appropriately.

Tested-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-08-18 11:27:15 +01:00
Thierry Reding f3f375cd4e drm/bridge: Remove stale ptn3460.h include
This header file declares prototypes of functions that are no longer
used. Remove this file and all references to it.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-06-05 13:49:37 +02:00
Yakir Yang 034705a48b drm: bridge/dw_hdmi: separate VLEVCTRL settting into platform driver
Because of iMX6 & Rockchip have differnet mpll config parameter,
the VLEVCTRL parameter would be different. In this case we should
separate VLEVCTRL setting from the common dw_hdmi driver, config
this parameter in platform driver(dw_hdmi-imx and dw_hdmi-rockchip)

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-01 10:54:13 +01:00
Ajay Kumar 3d3f8b1f8b drm/bridge: make bridge registration independent of drm flow
Currently, third party bridge drivers(ptn3460) are dependent
on the corresponding encoder driver init, since bridge driver
needs a drm_device pointer to finish drm initializations.
The encoder driver passes the drm_device pointer to the
bridge driver. Because of this dependency, third party drivers
like ptn3460 doesn't adhere to the driver model.

In this patch, we reframe the bridge registration framework
so that bridge initialization is split into 2 steps, and
bridge registration happens independent of drm flow:
--Step 1: gather all the bridge settings independent of drm and
	  add the bridge onto a global list of bridges.
--Step 2: when the encoder driver is probed, call drm_bridge_attach
	  for the corresponding bridge so that the bridge receives
	  drm_device pointer and continues with connector and other
	  drm initializations.

The old set of bridge helpers are removed, and a set of new helpers
are added to accomplish the 2 step initialization.

The bridge devices register themselves onto global list of bridges
when they get probed by calling "drm_bridge_add".

The parent encoder driver waits till the bridge is available
in the lookup table(by calling "of_drm_find_bridge") and then
continues with its initialization.

The encoder driver should also call "drm_bridge_attach" to pass
on the drm_device to the bridge object.

drm_bridge_attach inturn calls "bridge->funcs->attach" so that
bridge can continue with drm related initializations.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Rahul Sharma <rahul.sharma@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-28 08:45:40 +01:00
Andy Yan 12b9f204e8 drm: bridge/dw_hdmi: add rockchip rk3288 support
Rockchip RK3288 hdmi is compatible with dw_hdmi

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07 18:32:00 +01:00
Andy Yan b21f4b658d drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
the original imx hdmi driver is under drm/imx/,
which depends on imx-drm, so move the imx hdmi
driver out to drm/bridge and rename it to dw_hdmi

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07 18:31:56 +01:00
Dave Airlie 63ac07cdee drm/bridge/ptn3460: fix modular build
This failed to build =m, quick fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-03-24 09:21:15 +10:00
Sean Paul a9fe713d7d drm/bridge: Add PTN3460 bridge driver
This patch adds a drm_bridge driver for the PTN3460 DisplayPort to LVDS
bridge chip.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-24 00:36:37 +09:00