Граф коммитов

87805 Коммитов

Автор SHA1 Сообщение Дата
Stefan Roese 99d8be052e [POWERPC] 4xx: Add L2 cache node to AMCC Taishan dts file
This patch adds the L2 cache node to the Taishan 440GX dts file.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:28:01 -05:00
Stefan Roese 2a7069190e [POWERPC] 4xx: Add PPC4xx L2-cache support (440GX)
This patch adds support for the 256k L2 cache found on some IBM/AMCC
4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c)
which currently "only" adds the L2 cache init code. Other common 4xx
stuff can be added later here.

The L2 cache handling code is a copy of Eugene's code in arch/ppc
with small modifications.

Tested on AMCC Taishan 440GX.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:54 -05:00
Stefan Roese 145692a734 [POWERPC] 4xx: Add "amcc, haleakala" to the toplevel compatible property
Currently Haleakala uses the Kilauea platform code. This patch adds
"haleakala" to the compatible property, in case later kernel versions
will introduce a Haleakala platform code.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:45 -05:00
Stefan Roese c06cf7dad6 [POWERPC] 4xx: Add AMCC Glacier 460GT eval board dts
The patch adds the Glacier dts. The Glacier is nearly identical to the
Canyonlands (460EX). Here the differences:

- 4 ethernet ports instead of 2
- no SATA port
- no USB port

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:38 -05:00
Stephen Neuendorffer ac64673449 [POWERPC] Xilinx: hwicap: Use fixed device major.
Major 259 has been assigned by lanana.  Use it.  Also, publish
/dev/icap[0-k] as the device entries, and register platform devices
named 'icap' to be consistent.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:31 -05:00
Stephen Neuendorffer 4c58f8fe2e [POWERPC] Xilinx: hwicap: Verify sync before reading idcode.
It appears that in some cases, the sync word might not be recognized
by the hardware correctly.  If this happens, then attempting to read
from the port results in an unrecoverable error because of the design
of the FPGA core.  This patch updates the code to check the status of
the device before reading the IDCODE, in order to avoid entering this
unrecoverable state.  This patch also adds additional NOOP commands
into the sychronization sequence, which appears to be necessary to
avoid the condition on some hardware.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:21 -05:00
Stephen Neuendorffer 6b06fdbaf9 [POWERPC] Xilinx: hwicap: Refactor status handling code.
Both the buffer-based and fifo-based icap cores have a status
register.  Previously, this was only used internally to check whether
transactions have completed.  However, the status can be useful to the
main driver as well.  This patch exposes these status functions to the
main driver along with some masks for the differnet bits.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:27:11 -05:00
Stefan Roese 7831426351 [POWERPC] 4xx: Add TAH support to taishan dts
This patch adds TAH (TCP/IP Acceleration Hardware) support to the
taishan 440GX dts. It depends on the NEWEMAC/tah patch that adds the
compatible "ibm,tah" property to the matching table.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:26:55 -05:00
Valentine Barshak 6e42b21bb9 [POWERPC] 4xx: Use dcri_clrset() for PCIe indirect dcr read/modify/write access
Use dcri_clrset() for PCIe SDR0 read/modify/write access.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:23:09 -05:00
Valentine Barshak 266d028acb [POWERPC] 4xx: Add dcri_clrset() for locked read/modify/write functionality
This adds dcri_clrset() macro which does read/modify/write
on indirect dcr registers while holding indirect dcr lock.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:20:38 -05:00
Josh Boyer d0a48c9f4c [POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board
Add the cuboot wrapper for the AMCC 440EP Yosemite board

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:17 -05:00
Josh Boyer ed70854a4f [POWERPC] 4xx: Add platform support for the AMCC Yosemite board
The AMCC 440EP Yosemite board is very similar to the original AMCC Bamboo
board.  This adds a YOSEMITE option to Kconfig, and reuses the existing
bamboo board support in the kernel.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:17 -05:00
Josh Boyer fd0ed740a1 [POWERPC] 4xx: Add AMCC 440EP Yosemite DTS
This adds a DTS file for the AMCC 440EP Yosemite board.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:17 -05:00
Stefan Roese 1d60f0fcda [POWERPC] 4xx: Add Canyonlands defconfig file
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:17 -05:00
Stefan Roese 66b7e504c0 [POWERPC] 4xx: Add 460EX PCIe support to 4xx pci driver
All this code is needed to properly initialize the 460EX PCIe host
bridge(s). We re-initialize all ports again, even though this has been done
in the bootloader (U-Boot) before. This way we make sure, that we always
run the latest init code in Linux and don't depend on code versions from
U-Boot.

Unfortunately all IBM/AMCC chips currently supported in this PCIe driver need
a different reset-/init-sequence.

Tested on AMCC Canyonlands eval board.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:16 -05:00
Stefan Roese 8bc4a51d28 [POWERPC] 4xx: Add Canyonlands DTS
This dts source file for the AMCC 460EX Canyonlands evalutaion board

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:16 -05:00
Stefan Roese 66e4b3341d [POWERPC] 4xx: Add AMCC Canyonlands 460EX eval board support to platforms/44x
Canyonlands is the AMCC 460EX eval board, featuring nearly all of the 460EX
interfaces:

- 1 * PCI (max 66MHz), 2 * PCIe (one 4-lane, one 1-lane)
- 2 * GBit Ethernet with TCP/IP acceleration
- USB 2.0 Host/Device OTG and Host interface
- SATA port

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:16 -05:00
Stefan Roese 464076a4b3 [POWERPC] 4xx: Add AMCC 460EX/460GT support to cputable.c & cpu_setup_44x.S
This patch adds basic support for the AMCC 460EX/460GT PPC's to arch/powerpc.
Currently those PPC's are still based on a 440 core and *not* a 460 core.

Here some basic features of those SoC's:

460EX:
- Up to 1.2GHz, 32kB L1 I-cache and D-cache, 256kB L2-cache, FPU
- 1 * PCI (max 66MHz), 2 * PCIe (one 4-lane, one 1-lane)
- 2 * GBit Ethernet with TCP/IP acceleration
- USB 2.0 Host/Device OTG and Host interface
- SATA controller
- Optional security feature

460GT (only changes to 460EX):
- 4 * GBit Ethernet with TCP/IP acceleration
- RapidIO
- No SATA
- No USB

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:16 -05:00
David Gibson ecc6cd73b7 [POWERPC] Start removing linux,network-index in favour of aliases
This patch alters the bootwrapper for a number of machines (roubhly
all 4xx based cuboot or treeboot platforms) to use aliases instead of
the linux,network-index hack to work out which MAC address to attach
to which ethernet device node.

The now obsolete linux,network-index properties are removed from the
corresponding device trees.  This won't break backwards compatiblity,
because in cases where this fixup code is relevant, the device tree is
part of the kernel image.

The references to linux,network-index are removed from
booting-without-of.txt.  Not only is it now deprecated, but as a hack
applicable only when the device tree blob and fixup code were in the
same image, this property never belonged in booting-without-of.txt
which describes the interface between the kernel and firmware or
bootloaders which produce a device tree.  By the time the device tree
reaches the kernel, all the MAC addresses must be fully filled in.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26 07:19:16 -05:00
Paul Mackerras 54f53f2b94 Merge branch 'linux-2.6' 2008-03-26 08:44:18 +11:00
Nathan Lynch f61fb8a52c [POWERPC] scanlog_init cleanup and minor fixes
scanlog_init() could use some love.

* properly return -ENODEV if this system doesn't support scan-log-dump
* don't printk if scan-log-dump not present; only older systems have it
* convert from create_proc_entry() to preferred proc_create()
* allocate zeroed data buffer
* fix potential memory leak of ent->data on failed create_proc_entry()
* simplify control flow

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:07 +11:00
Robert P. J. Day 9356d90eff [POWERPC] Move a.out.h to header-y since it doesn't check __KERNEL__
Since a.out.h doesn't check the value of __KERNEL__, there's no point
in unifdef'ing it.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:07 +11:00
Manish Ahuja 7415d5e0be [POWERPC] pseries: phyp dump: Inform kdump when phyp-dump is loaded
This adds /sys/kernel/phyp_dump_active so that kdump init scripts may
look for it and take appropriate action if this file is found.  This
file is only created when phyp_dump has been registered.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:07 +11:00
Manish Ahuja 654f596da4 [POWERPC] pseries: phyp dump: Disable phyp-dump through boot-var
This adds a kernel command line option "phyp_dump", which takes a 0/1
value for disabling/ enabling phyp_dump at boot time.  Kdump can use
this on cmdline (phyp_dump=0) to disable phyp-dump during boot when
enabling itself.  This will ensure only one dumping mechanism is active
at any given time.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:07 +11:00
Manish Ahuja 242f271c05 [POWERPC] pseries: phyp dump: Add Kconfig file option
Add hypervisor-assisted dump to kernel config.

Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:07 +11:00
Manish Ahuja fd35cff8d2 [POWERPC] pseries: phyp dump: Tracking memory range freed
This tracks the size freed.  For now it does a simple rudimentary
calculation of the ranges freed.  The idea is to keep it simple at the
external shell script level and send in large chunks for now.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:07 +11:00
Manish Ahuja a9c508dae1 [POWERPC] pseries: phyp dump: Invalidate and print dump areas
This adds routines to
a. invalidate dump
b. calculate region that is reserved and needs to be freed.  This is
   exported through sysfs interface.

Unregister has been removed for now as it wasn't being used.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:06 +11:00
Manish Ahuja 599c1aa54f [POWERPC] pseries: phyp dump: Debugging print routines
Provide some basic debugging support.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:06 +11:00
Manish Ahuja 2c4f41139c [POWERPC] pseries: phyp dump: Register dump area
Set up the actual dump header, register it with the hypervisor.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:06 +11:00
Manish Ahuja d5a29c7a36 [POWERPC] pseries: phyp dump: Use sysfs to release reserved mem
Check to see if there actually is data from a previously
crashed kernel waiting.  If so, allow user-space tools to
grab the data (by reading /proc/kcore).  When user-space
finishes dumping a section, it must release that memory
by writing to sysfs. For example,

  echo "0x40000000 0x10000000" > /sys/kernel/release_region

will release 256MB starting at the 1GB.  The released memory
becomes free for general use.

Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:06 +11:00
Manish Ahuja 6ac26c8a7e [POWERPC] pseries: phyp dump: Reserve and release memory
Initial patch for reserving memory in early boot, and freeing it
later.  If the previous boot had ended with a crash, the reserved
memory would contain a copy of the crashed kernel data.

Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:06 +11:00
Manish Ahuja d28a79326a [POWERPC] pseries: phyp dump: Documentation
Basic documentation for hypervisor-assisted dump.

Signed-off-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Manish Ahuja <mahuja@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:06 +11:00
Roland McGrath 163dab39b5 [POWERPC] powerpc32: Remove asm-offsets ptrace cruft
These items in asm-offsets.c are not used anywhere.  This removes them.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:05 +11:00
S.Çağlar Onur 59861bc6ee [POWERPC] arch/powerpc/platforms/iseries/pci.c: Use time_* macros
The functions time_before, time_before_eq, time_after, and
time_after_eq are more robust for comparing jiffies against other
values.

This implements usage of the time_after() macro, defined at
linux/jiffies.h, which deals with wrapping correctly.

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:05 +11:00
Tony Breeds 96366a8d3f [POWERPC] Update wait_state_cycles in the VPA
The hypervisor can look at the value in the wait_state_cycles field of
the VPA for an estimate of how busy dedicated processors are.
Currently, as the kernel never touches this field, we appear to be
100% busy.  This records the duration the kernel is in powersave and
passes that to the HV to provide a reasonable indication of
utilisation.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:05 +11:00
Roland McGrath 71e91a0abb [POWERPC] Don't touch PT_DTRACE in exec
The PT_DTRACE flag is meaningless and obsolete.
Don't touch it.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:05 +11:00
Stephen Rothwell bceabd1505 [POWERPC] Really export empty_zero_page
It was being protected by CONFIG_PPC32, but we want to export it on
64-bit also.  This moves it out of the ifdef.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:05 +11:00
Nathan Lynch 4944774d7f [POWERPC] maple: Enable ipr driver in defconfig
Some machines supported by the maple platform have an Obsidian
controller which can't be used without enabling CONFIG_IPR and the
options on which it depends.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:04 +11:00
Nathan Lynch 1cd8f348be [POWERPC] maple: Kill fixup_maple_ide
This function has been a no-op for about 18 months; it's there in
the history should anyone need to resurrect it.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:04 +11:00
Nathan Lynch 53378c2845 [POWERPC] maple: Use platform name in define_machine()
Prevailing practice for define_machine() in powerpc is to use the
platform name when the platform has only one define_machine()
statement, but maple uses "maple_md".  This caused me some
head-scratching when writing some new code that uses
machine_is(maple).

Use "maple" instead of "maple_md".  There should not be any behavioral
change -- fixup_maple_ide() calls machine_is(maple) but the body of
the function is ifdef'd out.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:04 +11:00
Marian Balakowicz 0276c1368f [POWERPC] Add 'model: ...' line to common show_cpuinfo()
Print out 'model' property of '/' node as a machine name
in generic show_cpuinfo() routine.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26 08:44:04 +11:00
Linus Torvalds a4083c9271 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: Fix cut-and-paste error in rtl8150.c
  USB: ehci: stop vt6212 bus hogging
  USB: sierra: add another device id
  USB: sierra: dma fixes
  USB: add support for Motorola ROKR Z6 cellphone in mass storage mode
  USB: isd200: fix memory leak in isd200_get_inquiry_data
  USB: pl2303: another product ID
  USB: new quirk flag to avoid Set-Interface
  USB: fix gadgetfs class request delegation
2008-03-24 23:24:16 -07:00
Linus Torvalds 4742dc1d76 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  driver core: debug for bad dev_attr_show() return value.
  UIO: add pgprot_noncached() to UIO mmap code
2008-03-24 23:23:39 -07:00
Andrew Morton 49741c4d01 PCI: revert "pcie: utilize pcie transaction pending bit"
Revert as it is reported to cause problems for people.

commit 4348a2dc49
Author: Shaohua Li <shaohua.li@intel.com>
Date:   Wed Oct 24 10:45:08 2007 +0800

    pcie: utilize pcie transaction pending bit

    PCIE has a mechanism to wait for Non-Posted request to complete. I think
    pci_disable_device is a good place to do this.

    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Due to the regression reported at
http://bugzilla.kernel.org/show_bug.cgi?id=10065

Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Soeren Sonnenburg <kernel@nn7.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:38:44 -07:00
Mark Gross 8a443df40b PCI: iova: lockdep false alarm fix
lockdep goes off on the iova copy_reserved_iova() because it and a function
it calls grabs locks in the from, and the to of the copy operation.

The function grab locks of the same lock classes triggering the warning.  The
first lock grabbed is for the constant reserved areas that is never accessed
after early boot.  Technically you could do without grabbing the locks for the
"from" structure its copying reserved areas from.

But dropping the from locks to me looks wrong, even though it would be ok.

The affected code only runs in early boot as its setting up the DMAR
engines.

This patch gives the reserved_ioval_list locks special lockdep classes.

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:38:44 -07:00
Andrew Morton 815d2d50da driver core: debug for bad dev_attr_show() return value.
Try to find the culprit who caused
http://bugzilla.kernel.org/show_bug.cgi?id=10150

Cc: <balajirrao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:33:49 -07:00
Jean-Samuel Chenard c9698d6b1a UIO: add pgprot_noncached() to UIO mmap code
Mapping of physical memory in UIO needs pgprot_noncached() to ensure
that IO memory is not cached. Without pgprot_noncached(), it (accidentally)
works on x86 and arm, but fails on PPC.

Signed-off-by: Jean-Samuel Chenard <jsamch@gmail.com>
Signed-off-by: Hans J Koch <hjk@linutronix.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:33:49 -07:00
Robert P. J. Day 7fdba2f291 USB: Fix cut-and-paste error in rtl8150.c
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:26:15 -07:00
Rene Herman 055b93c9e3 USB: ehci: stop vt6212 bus hogging
The VIA VT6212 defaults to only waiting 1us between passes over EHCI's
async ring, which hammers PCI badly ... and by preventing other devices
from accessing the bus, causes problems like drops in IDE throughput,
a problem that's been bugging users of those chips for several years.

A (partial) datasheet for this chip eventually turned up, letting us
see how to make it use a VIA-specific register to switch over to the
the normal 10us value instead, as suggested by the EHCI specification
Solution noted by Lev A. Melnikovsky.

It's not clear whether this register exists on other VIA chips; we
know that it's ineffective on the vt8235.  So this patch only applies
to chips that seem to be incarnations of the (discrete) vt6212.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Lev A. Melnikovsky <melnikovsky@mail.ru>
Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:26:15 -07:00
Kevin Lloyd 7f170a632d USB: sierra: add another device id
Add support for the MC8775 device to the sierra driver.

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24 22:26:15 -07:00