Running rcutorture with non-zero fqs_duration module parameter in a
kernel built with CONFIG_PREEMPTION=y results in the following splat:
BUG: using __this_cpu_read() in preemptible [00000000]
code: rcu_torture_fqs/398
caller is __this_cpu_preempt_check+0x13/0x20
CPU: 3 PID: 398 Comm: rcu_torture_fqs Not tainted 6.0.0-rc1-yoctodev-standard+
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x86
dump_stack+0x10/0x16
check_preemption_disabled+0xe5/0xf0
__this_cpu_preempt_check+0x13/0x20
rcu_force_quiescent_state.part.0+0x1c/0x170
rcu_force_quiescent_state+0x1e/0x30
rcu_torture_fqs+0xca/0x160
? rcu_torture_boost+0x430/0x430
kthread+0x192/0x1d0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>
The problem is that rcu_force_quiescent_state() uses __this_cpu_read()
in preemptible code instead of the proper raw_cpu_read(). This commit
therefore changes __this_cpu_read() to raw_cpu_read().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a few words to the informative message that appears
every ten seconds in RCU Tasks and RCU Tasks Trace grace periods.
This message currently reads as follows:
rcu_tasks_wait_gp: rcu_tasks grace period 1046 is 10088 jiffies old.
After this change, it provides additional context, instead reading
as follows:
rcu_tasks_wait_gp: rcu_tasks grace period number 1046 (since boot) is 10088 jiffies old.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The commit 3fcd6a230f ("x86/cpu: Avoid cpuinfo-induced IPIing of
idle CPUs") introduced rcu_is_idle_cpu() in order to identify the
current CPU idle state. But commit f3eca381bd ("x86/aperfmperf:
Replace arch_freq_get_on_cpu()") switched to using MAX_SAMPLE_AGE,
so rcu_is_idle_cpu() is no longer used. This commit therefore removes it.
Fixes: f3eca381bd ("x86/aperfmperf: Replace arch_freq_get_on_cpu()")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Making polled RCU grace periods account for expedited grace periods
required acquiring the leaf rcu_node structure's lock during early boot,
but after rcu_init() was called. This lock is irq-disabled, but the
code incorrectly assumes that irqs are always disabled when invoking
synchronize_rcu(). The exception is early boot before the scheduler has
started, which means that upon return from synchronize_rcu(), irqs will
be incorrectly enabled.
This commit fixes this bug by using irqsave/irqrestore locking primitives.
Fixes: bf95b2bc3e ("rcu: Switch polled grace-period APIs to ->gp_seq_polled")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives globally, but based
on the per-CPU data. These global checks are made by the grace-period
code that must scan the srcu_data structures anyway, and are done only
in kernels built with CONFIG_PROVE_RCU=y.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
This commit adds runtime checks to verify that a given srcu_struct uses
consistent NMI-safe (or not) read-side primitives on a per-CPU basis.
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory. If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.
This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.
If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.
This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context. It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure. Use one set or the other, not both.
Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work. If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
This commit adds code to the RTWS_POLL_GET case of rcu_torture_writer()
to verify that the value of NUM_ACTIVE_RCU_POLL_OLDSTATE is sufficiently
large
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds code to the RTWS_POLL_GET_FULL case
of rcu_torture_writer() to verify that the value of
NUM_ACTIVE_RCU_POLL_FULL_OLDSTATE is sufficiently large.
[ paulmck: Fix whitespace issue located by checkpatch.pl. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In preparation for RCU lazy changes, wake up the RCU nocb gp thread if
needed after an entrain. This change prevents the RCU barrier callback
from waiting in the queue for several seconds before the lazy callbacks
in front of it are serviced.
Reported-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When the bypass cblist gets too big or its timeout has occurred, it is
flushed into the main cblist. However, the bypass timer is still running
and the behavior is that it would eventually expire and wake the GP
thread.
Since we are going to use the bypass cblist for lazy CBs, do the wakeup
soon as the flush for "too big or too long" bypass list happens.
Otherwise, long delays can happen for callbacks which get promoted from
lazy to non-lazy.
This is a good thing to do anyway (regardless of future lazy patches),
since it makes the behavior consistent with behavior of other code paths
where flushing into the ->cblist makes the GP kthread into a
non-sleeping state quickly.
[ Frederic Weisbecker: Changes to avoid unnecessary GP-thread wakeups plus
comment changes. ]
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In kernels built with either CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y or
CONFIG_NO_HZ_FULL=y, additional CPUs must be added to rcu_nocb_mask.
Except that kernels booted without the rcu_nocbs= will not have
allocated rcu_nocb_mask. And the current rcu_init_nohz() function uses
its need_rcu_nocb_mask and offload_all local variables to track the
rcu_nocb and nohz_full state.
But there is a much simpler approach, namely creating a cpumask pointer
to track the default and then using cpumask_available() to check the
rcu_nocb_mask state. This commit takes this approach, thereby simplifying
and shortening the rcu_init_nohz() function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rnp->qsmask is locklessly accessed from rcutree_dying_cpu(). This
may help avoid load tearing due to concurrent access, KCSAN
issues, and preserve sanity of people reading the mask in tracing.
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Once either rcutree_online_cpu() or rcutree_dead_cpu() is invoked
concurrently, the following rcu_boost_kthread_setaffinity() race can
occur:
CPU 1 CPU2
mask = rcu_rnp_online_cpus(rnp);
...
mask = rcu_rnp_online_cpus(rnp);
...
set_cpus_allowed_ptr(t, cm);
set_cpus_allowed_ptr(t, cm);
This results in CPU2's update being overwritten by that of CPU1, and
thus the possibility of ->boost_kthread_task continuing to run on a
to-be-offlined CPU.
This commit therefore eliminates this race by relying on the pre-existing
acquisition of ->boost_kthread_mutex to serialize the full process of
changing the affinity of ->boost_kthread_task.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_report_dead() function invokes rcu_report_exp_rdp() in order
to force an immediate expedited quiescent state on the outgoing
CPU, and then it invokes rcu_preempt_deferred_qs() to provide any
required deferred quiescent state of either sort. Because the call to
rcu_preempt_deferred_qs() provides the expedited RCU quiescent state if
requested, the call to rcu_report_exp_rdp() is potentially redundant.
One possible issue is a concurrent start of a new expedited RCU
grace period, but this situation is already handled correctly
by __sync_rcu_exp_select_node_cpus(). This function will detect
that the CPU is going offline via the error return from its call
to smp_call_function_single(). In that case, it will retry, and
eventually stop retrying due to rcu_report_exp_rdp() clearing the
->qsmaskinitnext bit corresponding to the target CPU. As a result,
__sync_rcu_exp_select_node_cpus() will report the necessary quiescent
state after dealing with any remaining CPU.
This change assumes that control does not enter rcu_report_dead() within
an RCU read-side critical section, but then again, the surviving call
to rcu_preempt_deferred_qs() has always made this assumption.
This commit therefore removes the call to rcu_report_exp_rdp(), thus
relying on rcu_preempt_deferred_qs() to handle both normal and expedited
quiescent states.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
NMI-safe variants of srcu_read_lock() and srcu_read_unlock() are needed
by printk(), which on many architectures entails read-modify-write
atomic operations. This commit prepares Tree SRCU for this change by
making both ->srcu_lock_count and ->srcu_unlock_count by atomic_long_t.
[ paulmck: Apply feedback from John Ogness. ]
Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
As an accident of implementation, an RCU Tasks Trace grace period also
acts as an RCU grace period. However, this could change at any time.
This commit therefore creates an rcu_trace_implies_rcu_gp() that currently
returns true to codify this accident. Code relying on this accident
must call this function to verify that this accident is still happening.
Reported-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/r/20221014113946.965131-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The rcutorture_oom_notify() function unconditionally invokes
rcu_barrier(), which is OK when the rcutorture.torture_type value is
"rcu", but unhelpful otherwise. The purpose of these barrier calls is to
wait for all outstanding callback-flooding callbacks to be invoked before
cleaning up their data. Using the wrong barrier function therefore
risks arbitrary memory corruption. Thus, this commit changes these
rcu_barrier() calls into cur_ops->cb_barrier() to make things work when
torturing non-vanilla flavors of RCU.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Userspace execution is a valid quiescent state for RCU Tasks Trace,
but the scheduling-clock interrupt does not currently report such
quiescent states.
Of course, the scheduling-clock interrupt is not strictly speaking
userspace execution. However, the only way that this code is not
in a quiescent state is if something invoked rcu_read_lock_trace(),
and that would be reflected in the ->trc_reader_nesting field in
the task_struct structure. Furthermore, this field is checked by
rcu_tasks_trace_qs(), which is invoked by rcu_tasks_qs() which is in
turn invoked by rcu_note_voluntary_context_switch() in kernels building
at least one of the RCU Tasks flavors. It is therefore safe to invoke
rcu_tasks_trace_qs() from the rcu_sched_clock_irq().
But rcu_tasks_qs() also invokes rcu_tasks_classic_qs() for RCU
Tasks, which lacks the read-side markers provided by RCU Tasks Trace.
This raises the possibility that an RCU Tasks grace period could start
after the interrupt from userspace execution, but before the call to
rcu_sched_clock_irq(). However, it turns out that this is safe because
the RCU Tasks grace period waits for an RCU grace period, which will
wait for the entire scheduling-clock interrupt handler, including any
RCU Tasks read-side critical section that this handler might contain.
This commit therefore updates the rcu_sched_clock_irq() function's
check for usermode execution and its call to rcu_tasks_classic_qs()
to instead check for both usermode execution and interrupt from idle,
and to instead call rcu_note_voluntary_context_switch(). This
consolidates code and provides more faster RCU Tasks Trace
reporting of quiescent states in kernels that do scheduling-clock
interrupts for userspace execution.
[ paulmck: Consolidate checks into rcu_sched_clock_irq(). ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU Tasks Trace grace-period kthread loops across all CPUs, and
there can be quite a few CPUs, with some commercially available systems
sporting well over a thousand of them. Some of these loops can feature
IPIs, which can take some time. This commit therefore places a call to
cond_resched_tasks_rcu_qs() in each such loop.
Link: https://docs.google.com/document/d/1V0YnG1HTWMt9WHJjroiJL9lf-hMrud4v8Fn3fhyY0cI/edit?usp=sharing
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_PROVE_RCU=y and CONFIG_DEBUG_LOCK_ALLOC=y
attempt to emit a warning when the synchronize_rcu_tasks_generic()
function is called during early boot while the rcu_scheduler_active
variable is RCU_SCHEDULER_INACTIVE. However the warnings is not
actually be printed because the debug_lockdep_rcu_enabled() returns
false, exactly because the rcu_scheduler_active variable is still equal
to RCU_SCHEDULER_INACTIVE.
This commit therefore replaces RCU_LOCKDEP_WARN() with WARN_ONCE()
to force these warnings to actually be printed.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit makes Tiny SRCU use full-sized grace-period counters to
further avoid counter-wrap issues when using polled grace-period APIs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit applies the more-precise grace-period-state check used by
rcu_seq_done_exact() to poll_state_synchronize_srcu(). This is important
because Tiny SRCU uses a 16-bit counter, which can wrap quite quickly.
If counter wrap continues to be a problem, then expanding ->srcu_idx
and ->srcu_idx_max to 32 bits might be warranted.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit brings the "srcud" (dynamically allocated) SRCU test in line
with the "srcu" (statically allocated) test, so that both test the full
SRCU polled grace-period API.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU's polled grace-period API is reasonably lightweight, but still
contains heavyweight memory barriers. This commit therefore limits
testing of this API from rcutorture's readers in order to avoid the
false negatives that these heavyweight operations could provoke.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit expands the rcu_torture_write_types() function's first "if"
condition and body, placing one element per line, in order to make the
compiler's error messages more helpful.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit changes the use of gp_poll_exp to gp_poll_exp1 in the first
check in rcu_torture_write_types(). No functional effect, but consistency
is a good thing.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Large systems can have hundreds of rcu_node structures, and updating
counters in each of them might slow down booting. This commit therefore
updates only the counters in those rcu_node structures corresponding
to the boot CPU, up to and including the root rcu_node structure.
The counters for the remaining rcu_node structures are updated by the
rcu_scheduler_starting() function, which executes just before the first
non-boot kthread is spawned.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that rcu_gp_oldstate can accurately track both normal and
expedited grace periods regardless of system state, rcutorture's
rcu_poll_need_2gp() function need only call for a second grace period
for the old single-unsigned-long grace-period polling APIs
This commit therefore adjusts rcu_poll_need_2gp() accordingly.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because both normal and expedited grace periods increment their respective
counters on their pre-scheduler early boot fastpaths, the rcu_gp_oldstate
structure no longer needs its ->rgos_polled field. This commit therefore
removes this field, shrinking this structure so that it is the same size
as an rcu_head structure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes the early boot single-CPU synchronize_rcu_expedited()
fastpath to update the rcu_state structure's ->expedited_sequence
counter. This will allow the full-state polled grace-period APIs to
detect all expedited grace periods without the need to track the special
combined polling-only counter, which is another step towards removing
the ->rgos_polled field from the rcu_gp_oldstate, thereby reducing its
size by one third.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the expedited grace-period fast path can only happen during
the pre-scheduler portion of early boot, this fast path can no longer
block run-time RCU Trace grace periods. This commit therefore removes
the conditional cond_resched() invocation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes the early boot single-CPU synchronize_rcu() fastpath to
update the rcu_state and rcu_node structures' ->gp_seq and ->gp_seq_needed
counters. This will allow the full-state polled grace-period APIs to
detect all normal grace periods without the need to track the special
combined polling-only counter, which is a step towards removing the
->rgos_polled field from the rcu_gp_oldstate, thereby reducing its size
by one third.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the grace-period fast path can only happen during the
pre-scheduler portion of early boot, this fast path can no longer block
run-time RCU Tasks and RCU Tasks Trace grace periods. This commit
therefore removes the conditional cond_resched_tasks_rcu_qs() invocation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It would be good do reduce the size of the rcu_gp_oldstate structure
from three unsigned long instances to two, but this requires that the
boot-time optimized grace periods update the various ->gp_seq fields.
Updating these fields in the rcu_state structure and in all of the
rcu_node structures is at least semi-reasonable, but updating them in
all of the rcu_data structures is a bridge too far. This means that if
there are too many early boot-time grace periods, the ->gp_seq field in
the rcu_data structure cannot be trusted. This commit therefore sets
each rcu_data structure's ->gpwrap field to provide the necessary impetus
for a suitable level of distrust.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The run-time single-CPU grace-period optimization applies only to
kernels built with CONFIG_SMP=y && CONFIG_PREEMPTION=y that are running
on a single-CPU system. But a kernel intended for a single-CPU system
should instead be built with CONFIG_SMP=n, and in any case, single-CPU
systems running Linux no longer appear to be the common case. Plus this
optimization results in the rcu_gp_oldstate structure being half again
larger than it needs to be.
This commit therefore disables the run-time single-CPU grace-period
optimization, so that this optimization applies only during the
pre-scheduler portion of the boot sequence.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The cond_synchronize_rcu_expedited() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds yet another member of the full-state RCU
grace-period polling API, which is the cond_synchronize_rcu_exp_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The cond_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds yet another member of the full-state RCU
grace-period polling API, which is the cond_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
[ paulmck: Apply feedback from kernel test robot and Julia Lawall. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit removes the blank line preceding the oldstate parameter to
the docbook header for the poll_state_synchronize_rcu() function and
marks uses of this parameter later in that header.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The start_poll_synchronize_rcu_expedited() API compresses the combined
expedited and normal grace-period states into a single unsigned long,
which conserves storage, but can miss grace periods in certain cases
involving overlapping normal and expedited grace periods. Missing the
occasional grace period is usually not a problem, but there are use
cases that care about each and every grace period.
This commit therefore adds yet another member of the
full-state RCU grace-period polling API, which is the
start_poll_synchronize_rcu_expedited_full() function. This uses up to
three times the storage (rcu_gp_oldstate structure instead of unsigned
long), but is guaranteed not to miss grace periods.
[ paulmck: Apply feedback from kernel test robot and Julia Lawall. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The start_poll_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the start_poll_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds full-state polling checks to accompany the old-style
polling checks in the rcu_torture_one_read() function. If a polling
cycle within an RCU reader completes, a WARN_ONCE() is triggered.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This check does nothing because the state at this point in the code
because the rcu_torture_writer_state value is guaranteed to instead
be RTWS_REPLACE. This commit therefore removes this check.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a test to rcu_torture_writer() that verifies that a
->get_gp_state_full() and ->poll_gp_state_full() polled grace-period
sequence does not claim that a grace period elapsed within the confines
of the corresponding read-side critical section.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Only vanilla RCU needs a double grace period for its compressed
polled grace-period old-state cookie. This commit therefore adds an
rcu_torture_ops per-flavor function ->poll_need_2gp to allow this check
to be adapted to the RCU flavor under test. A NULL pointer for this
function says that doubled grace periods are never needed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstracts a do_rtws_sync() function that does synchronous
grace-period testing, but also testing the polled API 25% of the time
each for the normal and full-state variants of the polled API.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The get_state_synchronize_rcu() API compresses the combined expedited and
normal grace-period states into a single unsigned long, which conserves
storage, but can miss grace periods in certain cases involving overlapping
normal and expedited grace periods. Missing the occasional grace period
is usually not a problem, but there are use cases that care about each
and every grace period.
This commit therefore adds the next member of the full-state RCU
grace-period polling API, namely the get_state_synchronize_rcu_full()
function. This uses up to three times the storage (rcu_gp_oldstate
structure instead of unsigned long), but is guaranteed not to miss
grace periods.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The get_completed_synchronize_rcu() and poll_state_synchronize_rcu()
APIs compress the combined expedited and normal grace-period states into a
single unsigned long, which conserves storage, but can miss grace periods
in certain cases involving overlapping normal and expedited grace periods.
Missing the occasional grace period is usually not a problem, but there
are use cases that care about each and every grace period.
This commit therefore adds the first members of the full-state RCU
grace-period polling API, namely the get_completed_synchronize_rcu_full()
and poll_state_synchronize_rcu_full() functions. These use up to three
times the storage (rcu_gp_oldstate structure instead of unsigned long),
but which are guaranteed not to miss grace periods, at least in situations
where the single-CPU grace-period optimization does not apply.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Offline CPUs cannot be offloaded or deoffloaded. Any attempt to offload
or deoffload an offline CPU causes a message to be printed on the console,
which is good, but this message does not contain the CPU number, which
is bad. Such a CPU number can be helpful when debugging, as it gives a
clear indication that the CPU in question is in fact offline. This commit
therefore adds the CPU number to the CPU-{,de}offload failure messages.
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The show_rcu_nocb_gp_state() function is supposed to dump out the rcuog
kthread and the show_rcu_nocb_state() function is supposed to dump out
the rcuo[ps] kthread. Currently, both do a mixture, which is not optimal
for debugging, even though it does not affect functionality.
This commit therefore adjusts these two functions to focus on their
respective kthreads.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently the monitor work is scheduled with a fixed interval of HZ/20,
which is roughly 50 milliseconds. The drawback of this approach is
low utilization of the 512 page slots in scenarios with infrequence
kvfree_rcu() calls. For example on an Android system:
<snip>
kworker/3:3-507 [003] .... 470.286305: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000d0f0dde5 nr_records=6
kworker/6:1-76 [006] .... 470.416613: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000ea0d6556 nr_records=1
kworker/6:1-76 [006] .... 470.416625: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000003e025849 nr_records=9
kworker/3:3-507 [003] .... 471.390000: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000815a8713 nr_records=48
kworker/1:1-73 [001] .... 471.725785: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000fda9bf20 nr_records=3
kworker/1:1-73 [001] .... 471.725833: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000a425b67b nr_records=76
kworker/0:4-1411 [000] .... 472.085673: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000007996be9d nr_records=1
kworker/0:4-1411 [000] .... 472.085728: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000d0f0dde5 nr_records=5
kworker/6:1-76 [006] .... 472.260340: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000065630ee4 nr_records=102
<snip>
In many cases, out of 512 slots, fewer than 10 were actually used.
In order to improve batching and make utilization more efficient this
commit sets a drain interval to a fixed 5-seconds interval. Floods are
detected when a page fills quickly, and in that case, the reclaim work
is re-scheduled for the next scheduling-clock tick (jiffy).
After this change:
<snip>
kworker/7:1-371 [007] .... 5630.725708: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000005ab0ffb3 nr_records=121
kworker/7:1-371 [007] .... 5630.989702: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000060c84761 nr_records=47
kworker/7:1-371 [007] .... 5630.989714: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000000babf308 nr_records=510
kworker/7:1-371 [007] .... 5631.553790: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000bb7bd0ef nr_records=169
kworker/7:1-371 [007] .... 5631.553808: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x0000000044c78753 nr_records=510
kworker/5:6-9428 [005] .... 5631.746102: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000d98519aa nr_records=123
kworker/4:7-9434 [004] .... 5632.001758: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x00000000526c9d44 nr_records=322
kworker/4:7-9434 [004] .... 5632.002073: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000002c6a8afa nr_records=185
kworker/7:1-371 [007] .... 5632.277515: rcu_invoke_kfree_bulk_callback: rcu_preempt bulk=0x000000007f4a962f nr_records=510
<snip>
Here, all but one of the cases, more than one hundreds slots were used,
representing an order-of-magnitude improvement.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
As per the comments in include/linux/shrinker.h, .count_objects callback
should return the number of freeable items, but if there are no objects
to free, SHRINK_EMPTY should be returned. The only time 0 is returned
should be when we are unable to determine the number of objects, or the
cache should be skipped for another reason.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The fill_page_cache_func() function allocates couple of pages to store
kvfree_rcu_bulk_data structures. This is a lightweight (GFP_NORETRY)
allocation which can fail under memory pressure. The function will,
however keep retrying even when the previous attempt has failed.
This retrying is in theory correct, but in practice the allocation is
invoked from workqueue context, which means that if the memory reclaim
gets stuck, these retries can hog the worker for quite some time.
Although the workqueues subsystem automatically adjusts concurrency, such
adjustment is not guaranteed to happen until the worker context sleeps.
And the fill_page_cache_func() function's retry loop is not guaranteed
to sleep (see the should_reclaim_retry() function).
And we have seen this function cause workqueue lockups:
kernel: BUG: workqueue lockup - pool cpus=93 node=1 flags=0x1 nice=0 stuck for 32s!
[...]
kernel: pool 74: cpus=37 node=0 flags=0x1 nice=0 hung=32s workers=2 manager: 2146
kernel: pwq 498: cpus=249 node=1 flags=0x1 nice=0 active=4/256 refcnt=5
kernel: in-flight: 1917:fill_page_cache_func
kernel: pending: dbs_work_handler, free_work, kfree_rcu_monitor
Originally, we thought that the root cause of this lockup was several
retries with direct reclaim, but this is not yet confirmed. Furthermore,
we have seen similar lockups without any heavy memory pressure. This
suggests that there are other factors contributing to these lockups.
However, it is not really clear that endless retries are desireable.
So let's make the fill_page_cache_func() function back off after
allocation failure.
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_boost_kthread_setaffinity() function removes the outgoing CPU
from the set_cpus_allowed() mask for the corresponding leaf rcu_node
structure's rcub priority-boosting kthread. Except that if the outgoing
CPU will leave that structure without any online CPUs, the mask is set
to the housekeeping CPU mask from housekeeping_cpumask(). Which is fine
unless the outgoing CPU happens to be a housekeeping CPU.
This commit therefore removes the outgoing CPU from the housekeeping mask.
This would of course be problematic if the outgoing CPU was the last
online housekeeping CPU, but in that case you are in a world of hurt
anyway. If someone comes up with a valid use case for a system needing
all the housekeeping CPUs to be offline, further adjustments can be made.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with PREEMPT_RCU=y and RCU_STRICT_GRACE_PERIOD=y trigger
irq-work from rcu_read_unlock(), and the resulting irq-work handler
invokes rcu_preempt_deferred_qs_handle(). The point of this triggering
is to force grace periods to end quickly in order to give tools like KASAN
a better chance of detecting RCU usage bugs such as leaking RCU-protected
pointers out of an RCU read-side critical section.
However, this irq-work triggering is unconditional. This works, but
there is no point in doing this irq-work unless the current grace period
is waiting on the running CPU or task, which is not the common case.
After all, in the common case there are many rcu_read_unlock() calls
per CPU per grace period.
This commit therefore triggers the irq-work only when the current grace
period is waiting on the running CPU or task.
This change was tested as follows on a four-CPU system:
echo rcu_preempt_deferred_qs_handler > /sys/kernel/debug/tracing/set_ftrace_filter
echo 1 > /sys/kernel/debug/tracing/function_profile_enabled
insmod rcutorture.ko
sleep 20
rmmod rcutorture.ko
echo 0 > /sys/kernel/debug/tracing/function_profile_enabled
echo > /sys/kernel/debug/tracing/set_ftrace_filter
This procedure produces results in this per-CPU set of files:
/sys/kernel/debug/tracing/trace_stat/function*
Sample output from one of these files is as follows:
Function Hit Time Avg s^2
-------- --- ---- --- ---
rcu_preempt_deferred_qs_handle 838746 182650.3 us 0.217 us 0.004 us
The baseline sum of the "Hit" values (the number of calls to this
function) was 3,319,015. With this commit, that sum was 1,140,359,
for a 2.9x reduction. The worst-case variance across the CPUs was less
than 25%, so this large effect size is statistically significant.
The raw data is available in the Link: URL.
Link: https://lore.kernel.org/all/20220808022626.12825-1-qiang1.zhang@intel.com/
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The trigger_all_cpu_backtrace() function attempts to send an NMI to the
target CPU, which usually provides much better stack traces than the
dump_cpu_task() function's approach of dumping that stack from some other
CPU. So much so that most calls to dump_cpu_task() only happen after
a call to trigger_all_cpu_backtrace() has failed. And the exception to
this rule really should attempt to use trigger_all_cpu_backtrace() first.
Therefore, move the trigger_all_cpu_backtrace() invocation into
dump_cpu_task().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Valentin Schneider <vschneid@redhat.com>
Given that rcu_all_qs() is in non-preemptible kernels, why on earth should
it invoke preempt_disable()? This commit adds the reason, which is to
work nicely with debugging enabled in CONFIG_PREEMPT_COUNT=y kernels.
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, only Tree RCU leaks callbacks setting when it detects a
duplicate call_rcu(). This commit causes Tiny RCU to also leak
callbacks in this situation.
Because this is Tiny RCU, kernel size is important:
1. CONFIG_TINY_RCU=y and CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
(Production kernel)
Original:
text data bss dec hex filename
26290663 20159823 15212544 61663030 3ace736 vmlinux
With this commit:
text data bss dec hex filename
26290663 20159823 15212544 61663030 3ace736 vmlinux
2. CONFIG_TINY_RCU=y and CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
(Debugging kernel)
Original:
text data bss dec hex filename
26291319 20160143 15212544 61664006 3aceb06 vmlinux
With this commit:
text data bss dec hex filename
26291319 20160431 15212544 61664294 3acec26 vmlinux
These results show that the kernel size is unchanged for production
kernels, as desired.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_PREEMPTION=n and CONFIG_PREEMPT_COUNT=y maintain
preempt_count() state. Because such kernels map __rcu_read_lock()
and __rcu_read_unlock() to preempt_disable() and preempt_enable(),
respectively, this allows the expedited grace period's !CONFIG_PREEMPT_RCU
version of the rcu_exp_handler() IPI handler function to use
preempt_count() to detect quiescent states.
This preempt_count() usage might seem to risk failures due to
use of implicit RCU readers in portions of the kernel under #ifndef
CONFIG_PREEMPTION, except that rcu_core() already disallows such implicit
RCU readers. The moral of this story is that you must use explicit
read-side markings such as rcu_read_lock() or preempt_disable() even if
the code knows that this kernel does not support preemption.
This commit therefore adds a preempt_count()-based check for a quiescent
state in the !CONFIG_PREEMPT_RCU version of the rcu_exp_handler()
function for kernels built with CONFIG_PREEMPT_COUNT=y, reporting an
immediate quiescent state when the interrupted code had both preemption
and softirqs enabled.
This change results in about a 2% reduction in expedited grace-period
latency in kernels built with both CONFIG_PREEMPT_RCU=n and
CONFIG_PREEMPT_COUNT=y.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20220622103549.2840087-1-qiang1.zhang@intel.com/
In non-premptible kernels, tasks never do context switches within
RCU read-side critical sections. Therefore, in such kernels, each
leaf rcu_node structure's ->blkd_tasks list will always be empty.
The comment on the non-preemptible version of rcu_preempt_deferred_qs()
confuses this point, so this commit therefore fixes it.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Kernels built with CONFIG_PREEMPT=n and CONFIG_RCU_STRICT_GRACE_PERIOD=y
report the quiescent state directly from the outermost rcu_read_unlock().
However, the current CPU's rcu_data structure's ->cpu_no_qs.b.norm
might still be set, in which case rcu_report_qs_rdp() will exit early,
thus failing to report quiescent state.
This commit therefore causes rcu_read_unlock_strict() to clear
CPU's rcu_data structure's ->cpu_no_qs.b.norm field before invoking
rcu_report_qs_rdp().
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve latency
and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuravgAKCRDdBJ7gKXxA
jpqSAQDrXSdII+ht9kSHlaCVYjqRFQz/rRvURQrWQV74f6aeiAD+NHHeDPwZn11/
SPktqEUrF1pxnGQxqLh1kUFUhsVZQgE=
=w/UH
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps
much like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
Full details are in the long shortlog contents.
All of these have been in linux-next for a while without any reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
1vU9Vtq2c73uBVLdZm4m
=AwP3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
This pull request contains the following branches:
doc.2022.06.21a: Documentation updates.
fixes.2022.07.19a: Miscellaneous fixes.
nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to
be offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS
and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel
boot parameter prevents offloaded callbacks from interfering
with real-time workloads and with energy-efficiency mechanisms.
poll.2022.07.21a: Polled grace-period updates, perhaps most notably
making these APIs account for both normal and expedited grace
periods.
rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing
the CPU overhead of RCU tasks trace grace periods by more than
a factor of two on a system with 15,000 tasks. The reduction
is expected to increase with the number of tasks, so it seems
reasonable to hypothesize that a system with 150,000 tasks might
see a 20-fold reduction in CPU overhead.
torture.2022.06.21a: Torture-test updates.
ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into
context tracking, thus reducing the overhead of transitioning to
kernel mode from either idle or nohz_full userspace execution
for kernels that track context independently of RCU. This is
expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y.
-----BEGIN PGP SIGNATURE-----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=vUNm
-----END PGP SIGNATURE-----
Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes
- Callback-offload updates, perhaps most notably a new
RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
offloaded at boot time, regardless of kernel boot parameters.
This is useful to battery-powered systems such as ChromeOS and
Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
parameter prevents offloaded callbacks from interfering with
real-time workloads and with energy-efficiency mechanisms
- Polled grace-period updates, perhaps most notably making these APIs
account for both normal and expedited grace periods
- Tasks RCU updates, perhaps most notably reducing the CPU overhead of
RCU tasks trace grace periods by more than a factor of two on a
system with 15,000 tasks.
The reduction is expected to increase with the number of tasks, so it
seems reasonable to hypothesize that a system with 150,000 tasks
might see a 20-fold reduction in CPU overhead
- Torture-test updates
- Updates that merge RCU's dyntick-idle tracking into context tracking,
thus reducing the overhead of transitioning to kernel mode from
either idle or nohz_full userspace execution for kernels that track
context independently of RCU.
This is expected to be helpful primarily for kernels built with
CONFIG_NO_HZ_FULL=y
* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
rcu: Diagnose extended sync_rcu_do_polled_gp() loops
rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
rcutorture: Test polled expedited grace-period primitives
rcu: Add polled expedited grace-period primitives
rcutorture: Verify that polled GP API sees synchronous grace periods
rcu: Make Tiny RCU grace periods visible to polled APIs
rcu: Make polled grace-period API account for expedited grace periods
rcu: Switch polled grace-period APIs to ->gp_seq_polled
rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
rcu/nocb: Add option to opt rcuo kthreads out of RT priority
rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
rcu/nocb: Add an option to offload all CPUs on boot
rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
rcu/nocb: Add/del rdp to iterate from rcuog itself
rcu/tree: Add comment to describe GP-done condition in fqs loop
rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
rcu/kvfree: Remove useless monitor_todo flag
rcu: Cleanup RCU urgency state for offline CPU
...
This pull request contains a pair of commits that fix 282d8998e9 ("srcu:
Prevent expedited GPs and blocking readers from consuming CPU"), which
was itself a fix to an SRCU expedited grace-period problem that could
prevent kernel live patching (KLP) from completing. That SRCU fix for
KLP introduced large (as in minutes) boot-time delays to embedded Linux
kernels running on qemu/KVM. These delays were due to the emulation of
certain MMIO operations controlling memory layout, which were emulated
with one expedited grace period per access. Common configurations
required thousands of boot-time MMIO accesses, and thus thousands of
boot-time expedited SRCU grace periods.
In these configurations, the occasional sleeps that allowed KLP to proceed
caused excessive boot delays. These commits preserve enough sleeps to
permit KLP to proceed, but few enough that the virtual embedded kernels
still boot reasonably quickly.
This represents a regression introduced in the v5.19 merge window,
and the bug is causing significant inconvenience, hence this pull request.
-----BEGIN PGP SIGNATURE-----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=ndhB
-----END PGP SIGNATURE-----
Merge tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This contains a pair of commits that fix 282d8998e9 ("srcu: Prevent
expedited GPs and blocking readers from consuming CPU"), which was
itself a fix to an SRCU expedited grace-period problem that could
prevent kernel live patching (KLP) from completing.
That SRCU fix for KLP introduced large (as in minutes) boot-time
delays to embedded Linux kernels running on qemu/KVM. These delays
were due to the emulation of certain MMIO operations controlling
memory layout, which were emulated with one expedited grace period per
access. Common configurations required thousands of boot-time MMIO
accesses, and thus thousands of boot-time expedited SRCU grace
periods.
In these configurations, the occasional sleeps that allowed KLP to
proceed caused excessive boot delays. These commits preserve enough
sleeps to permit KLP to proceed, but few enough that the virtual
embedded kernels still boot reasonably quickly.
This represents a regression introduced in the v5.19 merge window, and
the bug is causing significant inconvenience"
* tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
srcu: Make expedited RCU grace periods block even less frequently
srcu: Block less aggressively for expedited grace periods
If a CPU has interrupts disabled continuously starting before the
beginning of a given expedited RCU grace period, that CPU will not
execute that grace period's IPI handler. This will in turn mean
that the ->cpu_no_qs.b.exp field in that CPU's rcu_data structure
will continue to contain the boolean value false.
Knowing whether or not a CPU has had interrupts disabled can be helpful
when debugging an expedited RCU CPU stall warning, so this commit
adds a "D" indicator expedited RCU CPU stall warnings that signifies
that the corresponding CPU has had interrupts disabled throughout.
This capability was tested as follows:
runqemu kvm slirp nographic qemuparams="-m 4096 -smp 4" bootparams=
"isolcpus=2,3 nohz_full=2,3 rcu_nocbs=2,3 rcutree.dump_tree=1
rcutorture.stall_cpu_holdoff=30 rcutorture.stall_cpu=40
rcutorture.stall_cpu_irqsoff=1 rcutorture.stall_cpu_block=0
rcutorture.stall_no_softlockup=1" -d
The rcu_torture_stall() function ran on CPU 1, which displays the "D"
as expected given the rcutorture.stall_cpu_irqsoff=1 module parameter:
............
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks:
{ 1-...D } 26467 jiffies s: 13317 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-1:0x2/.
Task dump for CPU 1:
task:rcu_torture_sta state:R running task stack: 0 pid: 76 ppid: 2 flags:0x00004008
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit dumps out state when the sync_rcu_do_polled_gp() function
loops more than expected. This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When a normal RCU CPU stall warning is encountered with the
panic_on_rcu_stall sysfs variable is set, the system panics only after
the stall warning is printed. But when an expedited RCU CPU stall
warning is encountered with the panic_on_rcu_stall sysfs variable is
set, the system panics first, thus never printing the stall warning.
This commit therefore brings the expedited stall warning into line with
the normal stall warning by printing first and panicking afterwards.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds expedited grace-period functionality to RCU's polled
grace-period API, adding start_poll_synchronize_rcu_expedited() and
cond_synchronize_rcu_expedited(), which are similar to the existing
start_poll_synchronize_rcu() and cond_synchronize_rcu() functions,
respectively.
Note that although start_poll_synchronize_rcu_expedited() can be invoked
very early, the resulting expedited grace periods are not guaranteed
to start until after workqueues are fully initialized. On the other
hand, both synchronize_rcu() and synchronize_rcu_expedited() can also
be invoked very early, and the resulting grace periods will be taken
into account as they occur.
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes rcu_torture_writer() to use WARN_ON_ONCE() to check
that the cookie returned by the current RCU flavor's ->get_gp_state()
function (get_state_synchronize_rcu() for vanilla RCU) causes that
flavor's ->poll_gp_state function (poll_state_synchronize_rcu() for
vanilla RCU) to unconditionally return true.
Note that a pair calls to synchronous grace-period-wait functions are
used. This is necessary to account for partially overlapping normal and
expedited grace periods aligning in just the wrong way with polled API
invocations, which can cause those polled API invocations to ignore one or
the other of those partially overlapping grace periods. It is unlikely
that this sort of ignored grace period will be a problem in production,
but rcutorture can make it happen quite within a few tens of seconds.
This commit is in preparation for polled expedited grace periods.
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, this code could splat:
oldstate = get_state_synchronize_rcu();
synchronize_rcu_expedited();
WARN_ON_ONCE(!poll_state_synchronize_rcu(oldstate));
This situation is counter-intuitive and user-unfriendly. After all, there
really was a perfectly valid full grace period right after the call to
get_state_synchronize_rcu(), so why shouldn't poll_state_synchronize_rcu()
know about it?
This commit therefore makes the polled grace-period API aware of expedited
grace periods in addition to the normal grace periods that it is already
aware of. With this change, the above code is guaranteed not to splat.
Please note that the above code can still splat due to counter wrap on the
one hand and situations involving partially overlapping normal/expedited
grace periods on the other. On 64-bit systems, the second is of course
much more likely than the first. It is possible to modify this approach
to prevent overlapping grace periods from causing splats, but only at
the expense of greatly increasing the probability of counter wrap, as
in within milliseconds on 32-bit systems and within minutes on 64-bit
systems.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit switches the existing polled grace-period APIs to use a
new ->gp_seq_polled counter in the rcu_state structure. An additional
->gp_seq_polled_snap counter in that same structure allows the normal
grace period kthread to interact properly with the !SMP !PREEMPT fastpath
through synchronize_rcu(). The first of the two to note the end of a
given grace period will make knowledge of this transition available to
the polled API.
This commit is in preparation for polled expedited grace periods.
[ paulmck: Fix use of rcu_state.gp_seq_polled to start normal grace period. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, if the 'rcu_nocb_poll' kernel boot parameter is enabled, all
rcuog kthreads enter polling mode. However, if all of a given group
of rcuo kthreads correspond to CPUs that have been de-offloaded, the
corresponding rcuog kthread will nonetheless still wake up periodically,
unnecessarily consuming power and perturbing workloads. Fortunately,
this situation is easily detected by the fact that the rcuog kthread's
CPU's rcu_data structure's ->nocb_head_rdp list is empty.
This commit saves power and avoids unnecessarily perturbing workloads
by putting an rcuog kthread to sleep during any time period when all of
its rcuo kthreads' CPUs are de-offloaded.
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
This commit introduces a RCU_NOCB_CPU_CB_BOOST Kconfig option that
prevents rcuo kthreads from running at real-time priority, even in
kernels built with RCU_BOOST. This capability is important to devices
needing low-latency (as in a few milliseconds) response from expedited
RCU grace periods, but which are not running a classic real-time workload.
On such devices, permitting the rcuo kthreads to run at real-time priority
results in unacceptable latencies imposed on the application tasks,
which run as SCHED_OTHER.
See for example the following trace output:
<snip>
<...>-60 [006] d..1 2979.028717: rcu_batch_start: rcu_preempt CBs=34619 bl=270
<snip>
If that rcuop kthread were permitted to run at real-time SCHED_FIFO
priority, it would monopolize its CPU for hundreds of milliseconds
while invoking those 34619 RCU callback functions, which would cause an
unacceptably long latency spike for many application stacks on Android
platforms.
However, some existing real-time workloads require that callback
invocation run at SCHED_FIFO priority, for example, those running on
systems with heavy SCHED_OTHER background loads. (It is the real-time
system's administrator's responsibility to make sure that important
real-time tasks run at a higher priority than do RCU's kthreads.)
Therefore, this new RCU_NOCB_CPU_CB_BOOST Kconfig option defaults to
"y" on kernels built with PREEMPT_RT and defaults to "n" otherwise.
The effect is to preserve current behavior for real-time systems, but for
other systems to allow expedited RCU grace periods to run with real-time
priority while continuing to invoke RCU callbacks as SCHED_OTHER.
As you would expect, this RCU_NOCB_CPU_CB_BOOST Kconfig option has no
effect except on CPUs with offloaded RCU callbacks.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Callbacks are invoked in RCU kthreads when calbacks are offloaded
(rcu_nocbs boot parameter) or when RCU's softirq handler has been
offloaded to rcuc kthreads (use_softirq==0). The current code allows
for the rcu_nocbs case but not the use_softirq case. This commit adds
support for the use_softirq case.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Systems built with CONFIG_RCU_NOCB_CPU=y but booted without either
the rcu_nocbs= or rcu_nohz_full= kernel-boot parameters will not have
callback offloading on any of the CPUs, nor can any of the CPUs be
switched to enable callback offloading at runtime. Although this is
intentional, it would be nice to have a way to offload all the CPUs
without having to make random bootloaders specify either the rcu_nocbs=
or the rcu_nohz_full= kernel-boot parameters.
This commit therefore provides a new CONFIG_RCU_NOCB_CPU_DEFAULT_ALL
Kconfig option that switches the default so as to offload callback
processing on all of the CPUs. This default can still be overridden
using the rcu_nocbs= and rcu_nohz_full= kernel-boot parameters.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Uladzislau Rezki <urezki@gmail.com>
(In v4.1, fixed issues with CONFIG maze reported by kernel test robot).
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
If the rcuog/o[p] kthreads spawn failed, the offloaded rdp needs to
be explicitly deoffloaded, otherwise the target rdp is still considered
offloaded even though nothing actually handles the callbacks.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
In case of failure to spawn either rcuog or rcuo[p] kthreads for a given
rdp, rcu_nocb_rdp_deoffload() needs to be called with the hotplug
lock and the barrier_mutex held. However cpus write lock is already held
while calling rcutree_prepare_cpu(). It's not possible to call
rcu_nocb_rdp_deoffload() from there with just locking the barrier_mutex
or this would result in a locking inversion against
rcu_nocb_cpu_deoffload() which holds both locks in the reverse order.
Simply solve this with inverting the locking order inside
rcu_nocb_cpu_[de]offload(). This will be a pre-requisite to toggle NOCB
states toward cpusets anyway.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
NOCB rdp's are part of a group whose list is iterated by the
corresponding rdp leader.
This list is RCU traversed because an rdp can be either added or
deleted concurrently. Upon addition, a new iteration to the list after
a synchronization point (a pair of LOCK/UNLOCK ->nocb_gp_lock) is forced
to make sure:
1) we didn't miss a new element added in the middle of an iteration
2) we didn't ignore a whole subset of the list due to an element being
quickly deleted and then re-added.
3) we prevent from probably other surprises...
Although this layout is expected to be safe, it doesn't help anybody
to sleep well.
Simplify instead the nocb state toggling with moving the list
modification from the nocb (de-)offloading workqueue to the rcuog
kthreads instead.
Whenever the rdp leader is expected to (re-)set the SEGCBLIST_KTHREAD_GP
flag of a target rdp, the latter is queued so that the leader handles
the flag flip along with adding or deleting the target rdp to the list
to iterate. This way the list modification and iteration happen from the
same kthread and those operations can't race altogether.
As a bonus, the flags for each rdp don't need to be checked locklessly
before each iteration, which is one less opportunity to produce
nightmares.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Add a comment to explain why !rcu_preempt_blocked_readers_cgp() condition
is required on root rnp node, for GP completion check in rcu_gp_fqs_loop().
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a line of code by initializing the rcu_gp_fqs()
function's first_gp_fqs local variable in its declaration.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
monitor_todo is not needed as the work struct already tracks
if work is pending. Just use that to know if work is pending
using schedule_delayed_work() helper.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
When a CPU is slow to provide a quiescent state for a given grace
period, RCU takes steps to encourage that CPU to get with the
quiescent-state program in a more timely fashion. These steps
include these flags in the rcu_data structure:
1. ->rcu_urgent_qs, which causes the scheduling-clock interrupt to
request an otherwise pointless context switch from the scheduler.
2. ->rcu_need_heavy_qs, which causes both cond_resched() and RCU's
context-switch hook to do an immediate momentary quiscent state.
3. ->rcu_need_heavy_qs, which causes the scheduler-clock tick to
be enabled even on nohz_full CPUs with only one runnable task.
These flags are of course cleared once the corresponding CPU has passed
through a quiescent state. Unless that quiescent state is the CPU
going offline, which means that when the CPU comes back online, it will
needlessly consume additional CPU time and incur additional latency,
which constitutes a minor but very real performance bug.
This commit therefore adds the call to rcu_disable_urgency_upon_qs()
that clears these flags to the CPU-hotplug offlining code path.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
When running KASAN with Tiny RCU (e.g. under ARCH=um, where
a working KASAN patch is now available), we don't get any
information on the original kfree_rcu() (or similar) caller
when a problem is reported, as Tiny RCU doesn't record this.
Add the recording, which required pulling kvfree_call_rcu()
out of line for the KASAN case since the recording function
(kasan_record_aux_stack_noalloc) is neither exported, nor
can we include kasan.h into rcutiny.h.
without KASAN, the patch has no size impact (ARCH=um kernel):
text data bss dec hex filename
6151515 4423154 33148520 43723189 29b29b5 linux
6151515 4423154 33148520 43723189 29b29b5 linux + patch
with KASAN, the impact on my build was minimal:
text data bss dec hex filename
13915539 7388050 33282304 54585893 340ea25 linux
13911266 7392114 33282304 54585684 340e954 linux + patch
-4273 +4064 +-0 -209
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The purpose of commit 282d8998e9 ("srcu: Prevent expedited GPs
and blocking readers from consuming CPU") was to prevent a long
series of never-blocking expedited SRCU grace periods from blocking
kernel-live-patching (KLP) progress. Although it was successful, it also
resulted in excessive boot times on certain embedded workloads running
under qemu with the "-bios QEMU_EFI.fd" command line. Here "excessive"
means increasing the boot time up into the three-to-four minute range.
This increase in boot time was due to the more than 6000 back-to-back
invocations of synchronize_rcu_expedited() within the KVM host OS, which
in turn resulted from qemu's emulation of a long series of MMIO accesses.
Commit 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace
periods") did not significantly help this particular use case.
Zhangfei Gao and Shameerali Kolothum Thodi did experiments varying the
value of SRCU_MAX_NODELAY_PHASE with HZ=250 and with various values
of non-sleeping per phase counts on a system with preemption enabled,
and observed the following boot times:
+──────────────────────────+────────────────+
| SRCU_MAX_NODELAY_PHASE | Boot time (s) |
+──────────────────────────+────────────────+
| 100 | 30.053 |
| 150 | 25.151 |
| 200 | 20.704 |
| 250 | 15.748 |
| 500 | 11.401 |
| 1000 | 11.443 |
| 10000 | 11.258 |
| 1000000 | 11.154 |
+──────────────────────────+────────────────+
Analysis on the experiment results show additional improvements with
CPU-bound delays approaching one jiffy in duration. This improvement was
also seen when number of per-phase iterations were scaled to one jiffy.
This commit therefore scales per-grace-period phase number of non-sleeping
polls so that non-sleeping polls extend for about one jiffy. In addition,
the delay-calculation call to srcu_get_delay() in srcu_gp_end() is
replaced with a simple check for an expedited grace period. This change
schedules callback invocation immediately after expedited grace periods
complete, which results in greatly improved boot times. Testing done
by Marc and Zhangfei confirms that this change recovers most of the
performance degradation in boottime; for CONFIG_HZ_250 configuration,
specifically, boot times improve from 3m50s to 41s on Marc's setup;
and from 2m40s to ~9.7s on Zhangfei's setup.
In addition to the changes to default per phase delays, this
change adds 3 new kernel parameters - srcutree.srcu_max_nodelay,
srcutree.srcu_max_nodelay_phase, and srcutree.srcu_retry_check_delay.
This allows users to configure the srcu grace period scanning delays in
order to more quickly react to additional use cases.
Fixes: 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace periods")
Fixes: 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: yueluck <yueluck@163.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU_STRICT_GRACE_PERIOD Kconfig option does nothing in kernels
built with CONFIG_TINY_RCU=y, so this commit adjusts the dependencies
to disallow this combination.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Commit 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers
from consuming CPU") fixed a problem where a long-running expedited SRCU
grace period could block kernel live patching. It did so by giving up
on expediting once a given SRCU expedited grace period grew too old.
Unfortunately, this added excessive delays to boots of virtual embedded
systems specifying "-bios QEMU_EFI.fd" to qemu. This commit therefore
makes the transition away from expediting less aggressive, increasing
the per-grace-period phase number of non-sleeping polls of readers from
one to three and increasing the required grace-period age from one jiffy
(actually from zero to one jiffies) to two jiffies (actually from one
to two jiffies).
Fixes: 282d8998e9 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: chenxiang (M)" <chenxiang66@hisilicon.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
The intent of the CONFIG_RCU_STRICT_GRACE_PERIOD Konfig option is to
cause normal grace periods to complete quickly in order to better catch
errors resulting from improperly leaking pointers from RCU read-side
critical sections. However, kernels built with this option enabled still
wait for some hundreds of milliseconds before boosting RCU readers that
have been preempted within their current critical section. The value
of this delay is set by the CONFIG_RCU_BOOST_DELAY Kconfig option,
which defaults to 500 milliseconds.
This commit therefore causes kernels build with strict grace periods
to ignore CONFIG_RCU_BOOST_DELAY. This causes rcu_initiate_boost()
to start boosting immediately after all CPUs on a given leaf rcu_node
structure have passed through their quiescent states.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Currently, the rcu_node structure's ->cbovlmask field is set in call_rcu()
when a given CPU is suffering from callback overload. But if that CPU
goes offline, the outgoing CPU's callbacks is migrated to the running
CPU, which is likely to overload the running CPU. However, that CPU's
bit in its leaf rcu_node structure's ->cbovlmask field remains zero.
Initially, this is OK because the outgoing CPU's bit remains set.
However, that bit will be cleared at the next end of a grace period,
at which time it is quite possible that the running CPU will still
be overloaded. If the running CPU invokes call_rcu(), then overload
will be checked for and the bit will be set. Except that there is no
guarantee that the running CPU will invoke call_rcu(), in which case the
next grace period will fail to take the running CPU's overload condition
into account. Plus, because the bit is not set, the end of the grace
period won't check for overload on this CPU.
This commit therefore adds a call to check_cb_ovld_locked() in
rcutree_migrate_callbacks() to set the running CPU's ->cbovlmask bit
appropriately.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Stop-machine recently started calling additional functions while waiting:
----------------------------------------------------------------
Former stop machine wait loop:
do {
cpu_relax(); => macro
...
} while (curstate != STOPMACHINE_EXIT);
-----------------------------------------------------------------
Current stop machine wait loop:
do {
stop_machine_yield(cpumask); => function (notraced)
...
touch_nmi_watchdog(); => function (notraced, inside calls also notraced)
...
rcu_momentary_dyntick_idle(); => function (notraced, inside calls traced)
} while (curstate != MULTI_STOP_EXIT);
------------------------------------------------------------------
These functions (and the functions that they call) must be marked
notrace to prevent them from being updated while they are executing.
The consequences of failing to mark these functions can be severe:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 1-...!: (0 ticks this GP) idle=14f/1/0x4000000000000000 softirq=3397/3397 fqs=0
rcu: 3-...!: (0 ticks this GP) idle=ee9/1/0x4000000000000000 softirq=5168/5168 fqs=0
(detected by 0, t=8137 jiffies, g=5889, q=2 ncpus=4)
Task dump for CPU 1:
task:migration/1 state:R running task stack: 0 pid: 19 ppid: 2 flags:0x00000000
Stopper: multi_cpu_stop+0x0/0x18c <- stop_machine_cpuslocked+0x128/0x174
Call Trace:
Task dump for CPU 3:
task:migration/3 state:R running task stack: 0 pid: 29 ppid: 2 flags:0x00000000
Stopper: multi_cpu_stop+0x0/0x18c <- stop_machine_cpuslocked+0x128/0x174
Call Trace:
rcu: rcu_preempt kthread timer wakeup didn't happen for 8136 jiffies! g5889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=2 timer-softirq=594
rcu: rcu_preempt kthread starved for 8137 jiffies! g5889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=2
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack: 0 pid: 14 ppid: 2 flags:0x00000000
Call Trace:
schedule+0x56/0xc2
schedule_timeout+0x82/0x184
rcu_gp_fqs_loop+0x19a/0x318
rcu_gp_kthread+0x11a/0x140
kthread+0xee/0x118
ret_from_exception+0x0/0x14
rcu: Stack dump where RCU GP kthread last ran:
Task dump for CPU 2:
task:migration/2 state:R running task stack: 0 pid: 24 ppid: 2 flags:0x00000000
Stopper: multi_cpu_stop+0x0/0x18c <- stop_machine_cpuslocked+0x128/0x174
Call Trace:
This commit therefore marks these functions notrace:
rcu_preempt_deferred_qs()
rcu_preempt_need_deferred_qs()
rcu_preempt_deferred_qs_irqrestore()
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
The force-quiesce-state loop function rcu_gp_fqs_loop() checks for
callback overloading and does an immediate initial scan for idle CPUs
if so. However, subsequent rescans will be carried out at as leisurely a
rate as they always are, as specified by the rcutree.jiffies_till_next_fqs
module parameter. It might be tempting to just continue immediately
rescanning, but this turns the RCU grace-period kthread into a CPU hog.
It might also be tempting to reduce the time between rescans to a single
jiffy, but this can be problematic on larger systems.
This commit therefore divides the normal time between rescans by three,
rounding up. Thus a small system running at HZ=1000 that is suffering
from callback overload will wait only one jiffy instead of the normal
three between rescans.
[ paulmck: Apply Neeraj Upadhyay feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Context tracking's state and dynticks counter are going to be merged
in a single field so that both updates can happen atomically and at the
same time. Prepare for that with converting the state into an atomic_t.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Move the core RCU eqs/dynticks functions to context tracking so that
we can later merge all that code within context tracking.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
To prepare for migrating the RCU eqs accounting code to context tracking,
split the last-resort deferred nocb resched from rcu_user_enter() and
move it into a separate call from context tracking.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
In order to prepare for merging RCU dynticks counter into the context
tracking state, move the rcu_data's dynticks field to the context
tracking structure. It will later be mixed within the context tracking
state itself.
[ paulmck: Move enum ctx_state into global scope. ]
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Now rcu_irq_enter/exit() is an unnecessary middle call between
ct_irq_enter/exit() and nmi_irq_enter/exit(). Take this opportunity
to remove the former functions and move the comments above them to the
new entrypoints.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Start with moving the idle extended quiescent states
entrypoints to context tracking. For now those are dumb redirections to
existing RCU calls.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The ANDROID config symbol is only used to guard the binder config
symbol and to inject completely random config changes. Remove it
as it is obviously a bad idea.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629150102.1582425-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 2bb2b7b57f.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
In kernels built with CONFIG_PREEMPT_RT=y, spinlocks are replaced by
rt_mutex, which can sleep. This means that acquiring a non-raw spinlock
in a critical section where preemption is disabled can trigger the
following BUG:
BUG: scheduling while atomic: ref_scale_reade/76/0x00000002
Preemption disabled at:
ref_lock_section+0x16/0x80
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x82
dump_stack+0x10/0x12
__schedule_bug.cold+0x9c/0xad
__schedule+0x839/0xc00
schedule_rtlock+0x22/0x40
rtlock_slowlock_locked+0x460/0x1350
rt_spin_lock+0x61/0xe0
ref_lock_section+0x29/0x80
rcu_scale_one_reader+0x52/0x60
ref_scale_reader+0x28d/0x490
kthread+0x128/0x150
ret_from_fork+0x22/0x30
</TASK>
This commit therefore converts spinlock to raw_spinlock.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds warnings for allocation failure during the mem_dump_obj()
tests. It also terminates these tests upon such failure.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU priority boosting can fail in two situations:
1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs
is higher than those brought online at boot, then torture_onoff() may
later bring up CPUs that weren't online on boot. Now since rcutorture
initialization only boosts the ksoftirqds of the CPUs that have been
set online on boot, the CPUs later set online by torture_onoff won't
benefit from the boost, making RCU priority boosting fail.
2) The ksoftirqd kthreads are boosted after the creation of
rcu_torture_boost() kthreads, which opens a window large enough for these
rcu_torture_boost() kthreads to wait (despite running at FIFO priority)
for ksoftirqds that are still running at SCHED_NORMAL priority.
The issues can trigger for example with:
./kvm.sh --configs TREE01 --kconfig "CONFIG_RCU_BOOST=y"
[ 34.968561] rcu-torture: !!!
[ 34.968627] ------------[ cut here ]------------
[ 35.014054] WARNING: CPU: 4 PID: 114 at kernel/rcu/rcutorture.c:1979 rcu_torture_stats_print+0x5ad/0x610
[ 35.052043] Modules linked in:
[ 35.069138] CPU: 4 PID: 114 Comm: rcu_torture_sta Not tainted 5.18.0-rc1 #1
[ 35.096424] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[ 35.154570] RIP: 0010:rcu_torture_stats_print+0x5ad/0x610
[ 35.198527] Code: 63 1b 02 00 74 02 0f 0b 48 83 3d 35 63 1b 02 00 74 02 0f 0b 48 83 3d 21 63 1b 02 00 74 02 0f 0b 48 83 3d 0d 63 1b 02 00 74 02 <0f> 0b 83 eb 01 0f 8e ba fc ff ff 0f 0b e9 b3 fc ff f82
[ 37.251049] RSP: 0000:ffffa92a0050bdf8 EFLAGS: 00010202
[ 37.277320] rcu: De-offloading 8
[ 37.290367] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
[ 37.290387] RDX: 0000000000000000 RSI: 00000000ffffbfff RDI: 00000000ffffffff
[ 37.290398] RBP: 000000000000007b R08: 0000000000000000 R09: c0000000ffffbfff
[ 37.290407] R10: 000000000000002a R11: ffffa92a0050bc18 R12: ffffa92a0050be20
[ 37.290417] R13: ffffa92a0050be78 R14: 0000000000000000 R15: 000000000001bea0
[ 37.290427] FS: 0000000000000000(0000) GS:ffff96045eb00000(0000) knlGS:0000000000000000
[ 37.290448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 37.290460] CR2: 0000000000000000 CR3: 000000001dc0c000 CR4: 00000000000006e0
[ 37.290470] Call Trace:
[ 37.295049] <TASK>
[ 37.295065] ? preempt_count_add+0x63/0x90
[ 37.295095] ? _raw_spin_lock_irqsave+0x12/0x40
[ 37.295125] ? rcu_torture_stats_print+0x610/0x610
[ 37.295143] rcu_torture_stats+0x29/0x70
[ 37.295160] kthread+0xe3/0x110
[ 37.295176] ? kthread_complete_and_exit+0x20/0x20
[ 37.295193] ret_from_fork+0x22/0x30
[ 37.295218] </TASK>
Fix this with boosting the ksoftirqds kthreads from the boosting
hotplug callback itself and before the boosting kthreads are created.
Fixes: ea6d962e80 ("rcutorture: Judge RCU priority boosting on grace periods, not callbacks")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Systems built with CONFIG_DEBUG_PREEMPT=y can trigger the following
BUG while running the rcuscale performance test:
BUG: using smp_processor_id() in preemptible [00000000] code: rcu_scale_write/69
CPU: 0 PID: 66 Comm: rcu_scale_write Not tainted 5.18.0-rc7-next-20220517-yoctodev-standard+
caller is debug_smp_processor_id+0x17/0x20
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
check_preemption_disabled+0xdf/0xf0
debug_smp_processor_id+0x17/0x20
rcu_scale_writer+0x2b5/0x580
kthread+0x177/0x1b0
ret_from_fork+0x22/0x30
</TASK>
Reproduction method:
runqemu kvm slirp nographic qemuparams="-m 4096 -smp 8" bootparams="isolcpus=2,3
nohz_full=2,3 rcu_nocbs=2,3 rcutree.dump_tree=1 rcuscale.shutdown=false
rcuscale.gp_async=true" -d
The problem is that the rcu_scale_writer() kthreads fail to set the
PF_NO_SETAFFINITY flags, which causes is_percpu_thread() to assume
that the kthread's affinity might change at any time, thus the BUG
noted above.
This commit therefore causes rcu_scale_writer() to set PF_NO_SETAFFINITY
in its kthread's ->flags field, thus preventing this BUG.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The loop scanning the pipesummary[] array currently skips the last
element, which means that the diagnostics ignore those rarest of
situations, namely where some readers persist across more than ten
grace periods, but all other readers avoid spanning a full grace period.
This commit therefore adjusts the scan to include the last element of
this array.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kernel memory leak detector located the following:
unreferenced object 0xffff95d941135b50 (size 16):
comm "swapper/0", pid 1, jiffies 4294667610 (age 1367.451s)
hex dump (first 16 bytes):
f0 c6 c2 bd d9 95 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000bc81d9b1>] kmem_cache_alloc_trace+0x2f6/0x500
[<00000000d28be229>] rcu_torture_init+0x1235/0x1354
[<0000000032c3acd9>] do_one_initcall+0x51/0x210
[<000000003c117727>] kernel_init_freeable+0x205/0x259
[<000000003961f965>] kernel_init+0x1a/0x120
[<000000001998f890>] ret_from_fork+0x22/0x30
This is caused by the rcu_test_debug_objects() function allocating an
rcu_head structure, then failing to free it. This commit therefore adds
the needed kfree() after the last use of this structure.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The existing loop has an implicit manual loop that obscures the flow
and requires an extra control variable. This commit makes this implicit
loop explicit, thus saving several lines of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Dumping a big ftrace buffer could lead to a RCU stall. So there is the
ftrace buffer and the stall information which needs to be printed. When
there is additionally a WARN_ON() which describes the reason for the ftrace
buffer dump and the WARN_ON() is executed _after_ ftrace buffer dump, the
information get lost in the middle of the RCU stall information.
Therefore print WARN_ON() message before dumping the ftrace buffer in
rcu_torture_writer().
[ paulmck: Add tracing_off() to avoid cruft from WARN(). ]
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks
boot-time testing") fixes false positive rcu_tasks verification check
failure by repeating the test once every second until timeout using
schedule_timeout_uninterruptible().
Since rcu_tasks_verify_selft_tests() is called from do_initcalls()
as a late_initcall, this has the undesirable side effect of delaying
other late_initcall's queued after it by a second or more. Fix this by
instead using delayed_work to repeat the verification check.
Fixes: 2585014188d5 ("rcu-tasks: Be more patient for RCU Tasks boot-time testing")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The RCU-Tasks family of grace-period primitives can take some time to
complete, and the amount of time can depend on the exact hardware and
software configuration. Some configurations boot up fast enough that the
RCU-Tasks verification process gets false-positive failures. This commit
therefore allows up to 30 seconds for the grace periods to complete, with
this value adjustable downwards using the rcupdate.rcu_task_stall_timeout
kernel boot parameter.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
This commit updates comments to reflect the changes in the series
of commits that eliminated the full task-list scan.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
The rcu_tasks_trace_pregp_step() function invokes cpus_read_lock() to
disable CPU hotplug, and a later call to the rcu_tasks_trace_postscan()
function invokes cpus_read_unlock() to re-enable it. This was absolutely
necessary in the past in order to protect the intervening scan of the full
tasks list, but there is no longer such a scan. This commit therefore
improves readability by moving the cpus_read_unlock() call to the end
of the rcu_tasks_trace_pregp_step() function. This commit is a pure
code-motion commit without any (intended) change in functionality.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, the RCU Tasks Trace grace-period kthread IPIs each online CPU
using smp_call_function_single() in order to track any tasks currently in
RCU Tasks Trace read-side critical sections during which the corresponding
task has neither blocked nor been preempted. These IPIs are annoying
and are also not strictly necessary because any task that blocks or is
preempted within its current RCU Tasks Trace read-side critical section
will be tracked on one of the per-CPU rcu_tasks_percpu structure's
->rtp_blkd_tasks list. So the only time that this is a problem is if
one of the CPUs runs through a long-duration RCU Tasks Trace read-side
critical section without a context switch.
Note that the task_call_func() function cannot help here because there is
no safe way to identify the target task. Of course, the task_call_func()
function will be very useful later, when processing the list of tasks,
but it needs to know the task.
This commit therefore creates a cpu_curr_snapshot() function that returns
a pointer the task_struct structure of some task that happened to be
running on the specified CPU more or less during the time that the
cpu_curr_snapshot() function was executing. If there was no context
switch during this time, this function will return a pointer to the
task_struct structure of the task that was running throughout. If there
was a context switch, then the outgoing task will be taken care of by
RCU's context-switch hook, and the incoming task was either already taken
care during some previous context switch, or it is not currently within an
RCU Tasks Trace read-side critical section. And in this latter case, the
grace period already started, so there is no need to wait on this task.
This new cpu_curr_snapshot() function is invoked on each CPU early in
the RCU Tasks Trace grace-period processing, and the resulting tasks
are queued for later quiescent-state inspection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit maintains a new n_trc_holdouts counter that tracks the number
of tasks blocking the RCU Tasks grace period. This counter is useful
for debugging, and its value has been added to a diagostic message.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit takes off the training wheels and relies only on scanning
currently running tasks and tasks that have blocked or been preempted
within their current RCU Tasks Trace read-side critical section.
Before this commit, the time complexity of an RCU Tasks Trace grace
period is O(T), where T is the number of tasks. After this commit,
this time complexity is O(C+B), where C is the number of CPUs and B
is the number of tasks that have blocked (or been preempted) at least
once during their current RCU Tasks Trace read-side critical sections.
Of course, if all tasks have blocked (or been preempted) at least once
during their current RCU Tasks Trace read-side critical sections, this is
still O(T), but current expectations are that RCU Tasks Trace read-side
critical section will be short and that there will normally not be large
numbers of tasks blocked within such a critical section.
Dave Marchevsky kindly measured the effects of this commit on the RCU
Tasks Trace grace-period latency and the rcu_tasks_trace_kthread task's
CPU consumption per RCU Tasks Trace grace period over the course of a
fixed test, all in milliseconds:
Before After
GP latency 22.3 ms stddev > 0.1 17.0 ms stddev < 0.1
GP CPU 2.3 ms stddev 0.3 1.1 ms stddev 0.2
This was on a system with 15,000 tasks, so it is reasonable to expect
much larger savings on the systems on which this issue was first noted,
given that they sport well in excess of 100,000 tasks. CPU consumption
was measured using profiling techniques.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Tested-by: Dave Marchevsky <davemarchevsky@fb.com>
This commit updates the rcutorture.fwd_progress help text to say that
it is the number of forward-progress kthreads to spawn rather than the
old enable/disable functionality. While in the area, make the list of
torture-test parameters easier to read by taking advantage of 100 columns.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
This commit applies the "noinstr" tag to the rcu_idle_enter() and
rcu_idle_exit() functions, which are invoked from portions of the idle
loop that cannot be instrumented. These tags require reworking the
rcu_eqs_enter() and rcu_eqs_exit() functions that these two functions
invoke in order to cause them to use normal assertions rather than
lockdep. In addition, within rcu_idle_exit(), the raw versions of
local_irq_save() and local_irq_restore() are used, again to avoid issues
with lockdep in uninstrumented code.
This patch is based in part on an earlier patch by Jiri Olsa, discussions
with Peter Zijlstra and Frederic Weisbecker, earlier changes by Thomas
Gleixner, and off-list discussions with Yonghong Song.
Link: https://lore.kernel.org/lkml/20220515203653.4039075-1-jolsa@kernel.org/
Reported-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Yonghong Song <yhs@fb.com>
If the rcutree.use_softirq kernel boot parameter is disabled, then it is
possible that a RCU CPU stall is due to the rcuc kthreads being starved of
CPU time. There is currently no easy way to infer this from the RCU CPU
stall warning output. This commit therefore adds a string of the form "
rcuc=%ld jiffies(starved)" to a given CPU's output if the corresponding
rcuc kthread has been starved for more than two seconds.
[ paulmck: Eliminate extraneous space characters. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that RCU scans both running tasks and tasks that have blocked within
their current RCU Tasks Trace read-side critical section, there is no
need for it to scan the idle tasks. After all, an idle loop should not
be remain within an RCU Tasks Trace read-side critical section across
exit from idle, and from a BPF viewpoint, functions invoked from the
idle loop should not sleep. So only running idle tasks can be within
RCU Tasks Trace read-side critical sections.
This commit therefore removes the scan of the idle tasks from the
rcu_tasks_trace_postscan() function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit scans each CPU's ->rtp_blkd_tasks list, adding them to
the list of holdout tasks. This will cause the current RCU Tasks Trace
grace period to wait until these tasks exit their RCU Tasks Trace
read-side critical sections. This commit will enable later work
omitting the scan of the full task list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
A running task might be within an RCU Tasks Trace read-side critical
section for any length of time, but will not be placed on any of the
per-CPU rcu_tasks_percpu structure's ->rtp_blkd_tasks lists. Therefore
any RCU Tasks Trace grace-period processing that does not scan the full
task list must interact with the running tasks.
This commit therefore causes the rcu_tasks_trace_pregp_step() function
to IPI each CPU in order to place the corresponding task on the holdouts
list and to record whether or not it was in an RCU Tasks Trace read-side
critical section. Yes, it is possible to avoid adding it to that list
if it is not a reader, but that would prevent the system from remembering
that this task was in a quiescent state. Which is why the running tasks
are unconditionally added to the holdout list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds checks within rcu_tasks_trace_pertask() to avoid
duplicate (and destructive) additions to the holdouts list. These checks
will be required later due to the possibility of a given task having
blocked while in an RCU Tasks Trace read-side critical section, but now
running on a CPU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This is a code-motion-only commit that moves rcu_tasks_trace_pertask()
to precede rcu_tasks_trace_pregp_step(), so that the latter will be
able to invoke the other without forward references.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds a "B" indicator to the RCU Tasks Trace CPU stall warning
when the task has blocked within its current read-side critical section.
This serves as a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit causes rcu_read_unlock_trace() to check for the current
task being on a per-CPU list within the rcu_tasks_percpu structure,
and removes it from that list if so. This has the effect of curtailing
tracking of a task that blocked within an RCU Tasks Trace read-side
critical section once it exits that critical section.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit places any task that has ever blocked within its current
RCU Tasks Trace read-side critical section on a per-CPU list within the
rcu_tasks_percpu structure. Tasks are removed from this list when they
exit by the exit_tasks_rcu_finish_trace() function. The purpose of this
commit is to provide the information needed to eliminate the current
scan of the full task list.
This commit offsets the INT_MIN value for ->trc_reader_nesting with the
new nesting level in order to avoid queueing tasks that are exiting
their read-side critical sections.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from syzbot+9bb26e7c5e8e4fa7e641@syzkaller.appspotmail.com ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: syzbot <syzbot+9bb26e7c5e8e4fa7e641@syzkaller.appspotmail.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds fields to task_struct and to rcu_tasks_percpu that will
be used to avoid the task-list scan for RCU Tasks Trace grace periods,
and also initializes these fields.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
When a CPU is offline, its idle task can appear to be running, but it
cannot be doing anything while CPU-hotplug operations are excluded.
This commit takes advantage of that fact by making trc_check_slow_task()
check for task_curr(t) && cpu_online(task_cpu(t)), and recording
full information in that case.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, the RCU Tasks Trace CPU stall warning simply indicates
whether or not the .b.need_qs field is zero. This commit shows the
three permitted values and flags other values with either "!" or "?".
This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit tags offline CPUs with "(offline)" in RCU Tasks Trace CPU
stall warnings. This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit adds a "I" indicator to the RCU Tasks Trace CPU stall
warning when an IPI directed to a task has thus far failed to arrive.
This serves as a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Currently, trc_inspect_reader() does one check for nesting less than
or equal to zero, then sorts out the distinctions within this single
"if" statement. This commit simplifies the logic by providing one
"if" statement for quiescent states (nesting of zero) and another "if"
statement for transitioning from one nesting level to another or the
outermost rcu_read_unlock_trace() (negative nesting).
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit makes rcu_note_context_switch() unconditionally invoke the
rcu_tasks_qs() function, as opposed to doing so only when RCU (as opposed
to RCU Tasks Trace) urgently needs a grace period to end.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Because the task driving the grace-period kthread is in quiescent state
throughout, this commit excludes it from the list of tasks from which
a quiescent state is needed.
This does mean that attaching a sleepable BPF program to function in
kernel/rcu/tasks.h is a bad idea, by the way.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit identifies idle tasks for recently offlined CPUs as residing
in a quiescent state. This is safe only because CPU-hotplug operations
are excluded during these checks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Any idle task corresponding to an offline CPU is in an RCU Tasks Trace
quiescent state. This commit causes rcu_tasks_trace_postscan() to ignore
idle tasks for offline CPUs, which it can do safely due to CPU-hotplug
operations being disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit replaces the pair of READ_ONCE(t->trc_reader_nesting) calls
with a single such call and a local variable. This makes the code's
intent more clear.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Now that tasks are not removed from the list until they have responded to
any needed request for a quiescent state, it is no longer necessary to
wait for the trc_n_readers_need_end counter to go to zero. This commit
therefore removes that waiting code.
It is therefore also no longer necessary for rcu_tasks_trace_postgp() to
do the final decrement of this counter, so that code is also removed.
This in turn means that trc_n_readers_need_end counter itself can
be removed, as can the rcu_tasks_trace_iw irq_work structure and the
rcu_read_unlock_iw() function.
[ paulmck: Apply feedback from Zqiang. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit gets rid of the task_struct structure's ->trc_reader_checked
field, making it instead be a bit within the task_struct structure's
existing ->trc_reader_special.b.need_qs field. This commit also
atomically loads, stores, and checks the resulting combination of the
reader-checked and need-quiescent state flags. This will in turn allow
significant simplification of the rcu_tasks_trace_postgp() function
as well as elimination of the trc_n_readers_need_end counter in later
commits. These changes will in turn simplify later elimination of the
RCU Tasks Trace scan of the task list, which will make RCU Tasks Trace
grace periods less CPU-intensive.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit causes synchronous grace periods to be driven from the task
invoking synchronize_rcu_*(), allowing these functions to be invoked from
the mid-boot dead zone extending from when the scheduler was initialized
to to point that the various RCU tasks grace-period kthreads are spawned.
This change will allow the self-tests to run in a consistent manner.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is strictly a code-motion commit that moves the
synchronize_rcu_tasks_generic() down to where it can invoke
rcu_tasks_one_gp() without the need for a forward declaration.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstracts most of the rcu_tasks_kthread() function's loop
body into a new rcu_tasks_one_gp() function. It also introduces
a new ->tasks_gp_mutex to synchronize concurrent calls to this new
rcu_tasks_one_gp() function. This commit is preparation for allowing
RCU tasks grace periods to be driven by the calling task during the
mid-boot dead zone.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a debugging scan for callbacks that got lost during a
callback-queueing transition.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is currently up to the caller to handle stale return values from
get_state_synchronize_rcu(). If poll_state_synchronize_rcu() returned
true once, a grace period has elapsed, regardless of the fact that counter
wrap might cause some future poll_state_synchronize_rcu() invocation to
return false. For example, the caller might store a separate flag that
indicates whether some previous call to poll_state_synchronize_rcu()
determined that the relevant grace period had already ended.
This approach works, but it requires extra storage and is easy to get
wrong. This commit therefore introduces a get_completed_synchronize_rcu()
that returns a cookie that causes poll_state_synchronize_rcu() to always
return true. This already-completed cookie can be stored in place of the
cookie that previously caused poll_state_synchronize_rcu() to return true.
It can also be used to flag a given structure as not having been exposed
to readers, and thus not requiring a grace period to elapse.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, poll_state_synchronize_rcu() uses rcu_seq_done() to check
whether the specified grace period has completed. However, rcu_seq_done()
does a simple comparison that reserves have of the sequence-number space
for uncompleted grace periods. This has the unfortunate side-effect
of not handling sequence-number wrap gracefully. Of course, one can
argue that if someone has already waited for half of the full range of
grace periods, they can wait for the other half, but why wait at all in
this case?
This commit therefore creates a rcu_seq_done_exact() that counts as
uncompleted only the two grace periods during which the sequence number
might have been handed out, while still being uncompleted. This way,
if sequence-number wrap happens to hit that range, at most two additional
grace periods need be waited for.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and
all this caused merge conflicts with one susbystem or another.
This tree was put together to help try to avoid conflicts with these cleanups
going on different trees at time. So nothing exciting on this pull request,
just cleanups.
I actually had this sysctl-next tree up since v5.18 but I missed sending a
pull request for it on time during the last merge window. And so these changes
have been being soaking up on sysctl-next and so linux-next for a while.
The last change was merged May 4th.
Most of the compile issues were reported by 0day and fixed.
To help avoid a conflict with bpf folks at Daniel Borkmann's request
I merged bpf-next/pr/bpf-sysctl into sysctl-next to get the effor which
moves the BPF sysctls from kernel/sysctl.c to BPF core.
Possible merge conflicts and known resolutions as per linux-next:
bfp:
https://lkml.kernel.org/r/20220414112812.652190b5@canb.auug.org.au
rcu:
https://lkml.kernel.org/r/20220420153746.4790d532@canb.auug.org.au
powerpc:
https://lkml.kernel.org/r/20220520154055.7f964b76@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmKOq8ASHG1jZ3JvZkBr
ZXJuZWwub3JnAAoJEM4jHQowkoinDAkQAJVo5YVM9f74UwYp4PQhTpjxJBCjRoZD
z1u9bp5rMj2ujTC8Fr7VmzKaHrb8+r1C1WvCvZtIzemYNB4lZUrHpVDYfXuXiPRB
ihPmEjhlPO5PFBx6cVCpI3cu9bEhG00rLc1QXnABx/pXwNPcOTJAGZJVamZvqubk
chjgZrb7N+adHPfvS55v1+zpwdeKfpp5U3zuu5qlT/nn0GS0HCVzOj5fj4oC4wtJ
IqfUubo+FX50Ga58yQABWNrjaPD9Crykz5ohVazy3ElQl0hJ4VsK65ct3blqc2vz
1Bb8kPpWuv6aZ5nr1lCVE8qvF4ZIL33ySvpg5BSdWLQEDrBbSpzvJe9Yn7wgR+eq
y7fhpO24+zRM82EoDMEvyxX9u1n1RsvoXRtf3ds9BGf63MUxk8a1cgjlU6vuyO2U
JhDmfM1xzdKvPoY4COOnHzcAiIqzItTqKd09N5y0cahmYstROU8lvp9huhTAHqk1
SjQMbLIZG7OnX8ZeQcR1EB8sq/IOPZT48ejj0iJmQ8FyMaep71MOQLYyLPAq4lgh
JHXm8P6QdB57jfJbqAeNSyZoK0qdxOUR/83Zcah7Jjns6vkju1DNatEsaEEI2y2M
4n7/rkHeZ3TyFHBUX4e9FomKvGLsAalDBRiqsuxLSOPMU8rGrNLAslOAtKwvp90X
4ht3M2VP098l
=btwh
-----END PGP SIGNATURE-----
Merge tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
-----BEGIN PGP SIGNATURE-----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=pN3o
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Offload writing printk() messages on consoles to per-console
kthreads.
It prevents soft-lockups when an extensive amount of messages is
printed. It was observed, for example, during boot of large systems
with a lot of peripherals like disks or network interfaces.
It prevents live-lockups that were observed, for example, when
messages about allocation failures were reported and a CPU handled
consoles instead of reclaiming the memory. It was hard to solve even
with rate limiting because it would need to take into account the
amount of messages and the speed of all consoles.
It is a must to have for real time. Otherwise, any printk() might
break latency guarantees.
The per-console kthreads allow to handle each console on its own
speed. Slow consoles do not longer slow down faster ones. And
printk() does not longer unpredictably slows down various code paths.
There are situations when the kthreads are either not available or
not reliable, for example, early boot, suspend, or panic. In these
situations, printk() uses the legacy mode and tries to handle
consoles immediately.
- Add documentation for the printk index.
* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk, tracing: fix console tracepoint
printk: remove @console_locked
printk: extend console_lock for per-console locking
printk: add kthread console printers
printk: add functions to prefer direct printing
printk: add pr_flush()
printk: move buffer definitions into console_emit_next_record() caller
printk: refactor and rework printing logic
printk: add con_printk() macro for console details
printk: call boot_delay_msec() in printk_delay()
printk: get caller_id/timestamp after migration disable
printk: wake waiters for safe and NMI contexts
printk: wake up all waiters
printk: add missing memory barrier to wake_up_klogd()
printk: cpu sync always disable interrupts
printk: rename cpulock functions
printk/index: Printk index feature documentation
MAINTAINERS: Add printk indexing maintainers on mention of printk_index
Currently both expedited and regular grace period stall warnings use
a single timeout value that with units of seconds. However, recent
Android use cases problem require a sub-100-millisecond expedited RCU CPU
stall warning. Given that expedited RCU grace periods normally complete
in far less than a single millisecond, especially for small systems,
this is not unreasonable.
Therefore introduce the CONFIG_RCU_EXP_CPU_STALL_TIMEOUT kernel
configuration that defaults to 20 msec on Android and remains the same
as that of the non-expedited stall warnings otherwise. It also can be
changed in run-time via: /sys/.../parameters/rcu_exp_cpu_stall_timeout.
[ paulmck: Default of zero to use CONFIG_RCU_STALL_TIMEOUT. ]
Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 9c7ef4c30f12 ("srcu: Make Tree SRCU able to operate without
snp_node array") initializes the local variable sdp differently depending
on the srcu's state in srcu_gp_start(). Either way, this initialization
overwrites the value used when sdp is defined.
This commit therefore drops this pointless definition-time initialization.
Although there is no functional change, compiler code generation may
be affected.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an SRCU reader blocks while a synchronize_srcu_expedited() waits for
that same reader, then that grace period will spawn an endless series of
workqueue handlers, consuming a full CPU. This quickly gets pointless
because consuming more CPU isn't going to make that reader get done
faster, especially if it is blocked waiting for an external event.
This commit therefore spawns at most one pair of back-to-back workqueue
handlers per expedited grace period phase, instead inserting increasing
delays as that grace period phase grows older, but capped at 10 jiffies.
In any case, if there have been at least 100 back-to-back workqueue
handlers within a single jiffy, regardless of grace period or grace-period
phase, then a one-jiffy delay is inserted.
[ paulmck: Apply feedback from kernel test robot. ]
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Song Liu <song@kernel.org>
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit increases the sensitivity of contention detection by adding
checks to the acquisition of the srcu_data structure's lock on the
call_srcu() code path.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a srcutree.convert_to_big option of zero that causes
SRCU to decide at boot whether to wait for contention (small systems) or
immediately expand to large (large systems). A new srcutree.big_cpu_lim
(defaulting to 128) defines how many CPUs constitute a large system.
Co-developed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special contexts where it is desirable for the printk caller to
directly print out kernel messages. Using pr_flush() to wait for
threaded printers is only possible if the caller is in a sleepable
context and the kthreads are active. That is not always the case.
Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit()
functions to explicitly (and globally) activate/deactivate preferred
direct console printing. The term "direct console printing" refers to
printing to all enabled consoles from the context of the printk
caller. The term "prefer" is used because this type of printing is
only best effort. If the console is currently locked or other
printers are already actively printing, the printk caller will need
to rely on the other contexts to handle the printing.
This preferred direct printing is how all printing has been handled
until now (unless it was explicitly deferred).
When kthread printing is introduced, there may be some unanticipated
problems due to kthreads being unable to flush important messages.
In order to minimize such risks, preferred direct printing is
activated for the primary important messages when the system
experiences general types of major errors. These are:
- emergency reboot/shutdown
- cpu and rcu stalls
- hard and soft lockups
- hung tasks
- warn
- sysrq
Note that since kthread printing does not yet exist, no behavior
changes result from this commit. This is only implementing the
counter and marking the various places where preferred direct
printing is active.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds rcuscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of rcuscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcuscale, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) built. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcuscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks Rude and RCU Tasks Trace. Unless that kernel builds refscale,
whether built-in or as a module, in which case these RCU Tasks flavors are
(unnecessarily) built in. This both increases kernel size and increases
the complexity of certain tracing operations. This commit therefore
decouples the presence of refscale from the presence of RCU Tasks Rude
and RCU Tasks Trace.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds refscale, whether built-in or as a
module, in which case RCU Tasks is (unnecessarily) built in. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of refscale
from the presence of RCU Tasks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_RUDE_RCU, whether anything else
needs Tasks Rude RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Rude.
However, there is a need to select CONFIG_TASKS_RUDE_RCU for testing
purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is
thus a CONFIG_FORCE_TASKS_RUDE_RCU that selects CONFIG_TASKS_RUDE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, a CONFIG_PREEMPT_NONE=y kernel substitutes normal RCU for
RCU Tasks. Unless that kernel builds rcutorture, whether built-in or as
a module, in which case RCU Tasks is (unnecessarily) used. This both
increases kernel size and increases the complexity of certain tracing
operations. This commit therefore decouples the presence of rcutorture
from the presence of RCU Tasks.
However, there is a need to select CONFIG_TASKS_RCU for testing purposes.
Except that casual users must not be bothered with questions -- for them,
this needs to be fully automated. There is thus a CONFIG_FORCE_TASKS_RCU
that selects CONFIG_TASKS_RCU, is user-selectable, but which depends
on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Unless a kernel builds rcutorture, whether built-in or as a module, that
kernel is also built with CONFIG_TASKS_TRACE_RCU, whether anything else
needs Tasks Trace RCU or not. This unnecessarily increases kernel size.
This commit therefore decouples the presence of rcutorture from the
presence of RCU Tasks Trace.
However, there is a need to select CONFIG_TASKS_TRACE_RCU for
testing purposes. Except that casual users must not be bothered with
questions -- for them, this needs to be fully automated. There is thus
a CONFIG_FORCE_TASKS_TRACE_RCU that selects CONFIG_TASKS_TRACE_RCU,
is user-selectable, but which depends on CONFIG_RCU_EXPERT.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When booting kernels built with both CONFIG_RCU_STRICT_GRACE_PERIOD=y
and CONFIG_PREEMPT_RT=y, the rcu_read_unlock_special() function's
invocation of irq_work_queue_on() the init_irq_work() causes the
rcu_preempt_deferred_qs_handler() function to work execute in SCHED_FIFO
irq_work kthreads. Because rcu_read_unlock_special() is invoked on each
rcu_read_unlock() in such kernels, the amount of work just keeps piling
up, resulting in a boot-time hang.
This commit therefore avoids this hang by using IRQ_WORK_INIT_HARD()
instead of init_irq_work(), but only in kernels built with both
CONFIG_PREEMPT_RT=y and CONFIG_RCU_STRICT_GRACE_PERIOD=y.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_sync_enter() function is used by updaters to force RCU readers
(e.g. percpu-rwsem) to use their slow paths during an update. This is
accomplished by setting the ->gp_state of the rcu_sync structure to
GP_ENTER. In the case of percpu-rwsem, the readers' slow path waits on
a semaphore instead of just incrementing a reader count. Each updater
invokes the rcu_sync_exit() function to signal to readers that they
may again take their fastpaths. The rcu_sync_exit() function sets the
->gp_state of the rcu_sync structure to GP_EXIT, and if all goes well,
after a grace period the ->gp_state reverts back to GP_IDLE.
Unfortunately, the rcu_sync_enter() function currently has a comment
incorrectly stating that rcu_sync_exit() (by an updater) will re-enable
reader "slowpaths". This patch changes the comment to state that this
function re-enables reader fastpaths.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
For the spawning of the priority-boost kthreads can fail, improbable
though this might seem. This commit therefore refrains from attemoting
to initiate RCU priority boosting when The ->boost_kthread_task pointer
is NULL.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An early check on synchronize_rcu[_expedited]() tries to determine if
the current CPU is in UP mode on an SMP no-preempt kernel, in which case
there is no need to start a grace period since the current assumed
quiescent state is all we need.
However the preemption mode doesn't take into account the boot selected
preemption mode under CONFIG_PREEMPT_DYNAMIC=y, missing a possible
early return if the running flavour is "none" or "voluntary".
Use the shiny new preempt mode accessors to fix this. However,
avoid invoking them during early boot because doing so triggers a
WARN_ON_ONCE().
[ paulmck: Update for mainlined API. ]
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU's synchronous grace periods act quite differently when there is
only one online CPU, especially in the no-op case in kernels built with
CONFIG_PREEMPTION=n. This change in behavior can be important debugging
information, so this commit adds the number of online CPUs to the RCU
CPU stall warning messages.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The final "if" statement in rcu_gp_cleanup() has proven to be rather
confusing, straightforward though it might have seemed when initially
written. This commit therefore adds comments to its "then" and "else"
clauses to at least provide a more elevated form of confusion.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Reported-by: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A report of a 12-jiffy normal RCU CPU stall warning raises interesting
questions about the nature of time on the offending system. This commit
instruments rcu_sched_clock_irq(), which is RCU's hook into the
scheduling-clock interrupt, checking for the jiffies counter going
backwards.
Reported-by: Saravanan D <sarvanand@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Suppose we have a kernel built with both CONFIG_RCU_STRICT_GRACE_PERIOD=y
and CONFIG_PREEMPT=y. Suppose further that an RCU reader from which RCU
core needs a quiescent state ends in rcu_preempt_deferred_qs_irqrestore().
This function will then invoke rcu_report_qs_rdp() in order to immediately
report that quiescent state. Unfortunately, it will not have cleared
that reader's CPU's rcu_data structure's ->cpu_no_qs.b.norm field.
As a result, rcu_report_qs_rdp() will take an early exit because it
will believe that this CPU has not yet encountered a quiescent state,
and there will be no reporting of the current quiescent state.
This commit therefore causes rcu_preempt_deferred_qs_irqrestore() to
clear the ->cpu_no_qs.b.norm field before invoking rcu_report_qs_rdp().
Kudos to Boqun Feng and Neeraj Upadhyay for helping with analysis of
this issue!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The TASKS_RUDE_RCU does not select IRQ_WORK, which can result in build
failures for kernels that do not otherwise select IRQ_WORK. This commit
therefore causes the TASKS_RUDE_RCU Kconfig option to select IRQ_WORK.
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture module has an rcu_torture_writer task that repeatedly
performs writes, synchronizations, and deletes. There is a corner-case
check in rcu_torture_writer() wherein if nsynctypes is 0, a warning is
issued and the task waits to be stopped via a call to
torture_kthread_stopping() rather than performing any work.
There should be a return statement following this call to
torture_kthread_stopping(), as the intention with issuing the call to
torture_kthread_stopping() in the first place is to avoid the
rcu_torture_writer task from performing any work. Some of the work may even
be dangerous to perform, such as potentially causing a #DE due to
nsynctypes being used in a modulo operator when querying for sync updates
to issue.
This patch adds the missing return call. As a bonus, it also fixes a
checkpatch warning that was emitted due to the WARN_ONCE() call using the
name of the function rather than __func__.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture module is used to run torture tests that validate RCU.
rcutorture takes a variety of module parameters that configure the
functionality of the test. Amongst these parameters are the types of
synchronization mechanisms that the rcu_torture_writer and
rcu_torture_fakewriter tasks may use, and the torture_type of the run which
determines what read and sync operations are used by the various writer and
reader tasks that run throughout the test.
When the module is configured to only use sync types for which the
specified torture_type does not implement the necessary operations, we can
end up in a state where nsynctypes is 0. This is not an erroneous state,
but it currently crashes the kernel with a #DE due to nsynctypes being used
with a modulo operator in rcu_torture_fakewriter().
Here is an example of such a #DE:
$ insmod ./rcutorture.ko gp_cond=1 gp_cond_exp=0 gp_exp=0 gp_poll_exp=0
gp_normal=0 gp_poll=0 gp_poll_exp=0 verbose=9999 torture_type=trivial
...
[ 8536.525096] divide error: 0000 [#1] PREEMPT SMP PTI
[ 8536.525101] CPU: 30 PID: 392138 Comm: rcu_torture_fak Kdump: loaded Tainted: G S 5.17.0-rc1-00179-gc8c42c80febd #24
[ 8536.525105] Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
[ 8536.525106] RIP: 0010:rcu_torture_fakewriter+0xf1/0x2d0 [rcutorture]
[ 8536.525121] Code: 00 31 d2 8d 0c f5 00 00 00 00 48 63 c9 48 f7 f1 48 85 d2 0f 84 79 ff ff ff 48 89 e7 e8 78 78 01 00 48 63 0d 29 ca 00 00 31 d2 <48> f7 f1 8b 04 95 00 05 4e a0 83 f8 06 0f 84 ad 00 00 00 7f 1f 83
[ 8536.525124] RSP: 0018:ffffc9000777fef0 EFLAGS: 00010246
[ 8536.525127] RAX: 00000000223d006e RBX: cccccccccccccccd RCX: 0000000000000000
[ 8536.525130] RDX: 0000000000000000 RSI: ffffffff824315b9 RDI: ffffc9000777fef0
[ 8536.525132] RBP: ffffc9000487bb30 R08: 0000000000000002 R09: 000000000002a580
[ 8536.525134] R10: ffffffff82c5f920 R11: 0000000000000000 R12: ffff8881a2c35d00
[ 8536.525136] R13: ffff8881540c8d00 R14: ffffffffa04d39d0 R15: 0000000000000000
[ 8536.525137] FS: 0000000000000000(0000) GS:ffff88903ff80000(0000) knlGS:0000000000000000
[ 8536.525140] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8536.525142] CR2: 00007f839f022000 CR3: 0000000002c0a006 CR4: 00000000007706e0
[ 8536.525144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8536.525145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8536.525147] PKRU: 55555554
[ 8536.525148] Call Trace:
[ 8536.525150] <TASK>
[ 8536.525153] kthread+0xe8/0x110
[ 8536.525161] ? kthread_complete_and_exit+0x20/0x20
[ 8536.525167] ret_from_fork+0x22/0x30
[ 8536.525174] </TASK>
The solution is to gracefully handle the case of nsynctypes being 0 in
rcu_torture_fakewriter() by not performing any work. This is already being
done in rcu_torture_writer(), though there is a missing return on that path
which will be fixed in a subsequent patch.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tree RCU supports grace-period delays using the rcutree.gp_cleanup_delay,
rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot
parameters. These delays are strictly for debugging purposes, and have
proven quite effective at exposing bugs involving race with CPU-hotplug
operations. However, these delays can result in false positives when
used in conjunction with callback flooding, for example, those generated
by the rcutorture.fwd_progress kernel boot parameter.
This commit therefore suppresses grace-period delays while callback
flooding is in progress.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the cpu_possible_mask is sparse (for example, if bits are set only for
CPUs 0, 4, 8, ...), then rcu_tasks_invoke_cbs() will access per-CPU data
for a CPU not in cpu_possible_mask. It makes these accesses while doing
a workqueue-based binary search for non-empty callback lists. Although
this search must pass through CPUs not represented in cpu_possible_mask,
it has no need to check the callback list for such CPUs.
This commit therefore changes the rcu_tasks_invoke_cbs() function's
binary search so as to only check callback lists for CPUs present in
cpu_possible_mask.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If the rcupdate.rcu_task_enqueue_lim kernel boot parameter is set to
something greater than 1 and less than nr_cpu_ids, the code attempts to
use a subset of the CPU's RCU Tasks callback lists. This works, but only
if the cpu_possible_mask is contiguous. If there are "holes" in this
mask, the callback-enqueue code might attempt to access a non-existent
per-CPU ->rtcpu variable for a non-existent CPU. For example, if only
CPUs 0, 4, 8, 12, 16 and so on are in cpu_possible_mask, specifying
rcupdate.rcu_task_enqueue_lim=4 would cause the code to attempt to
use callback queues for non-existent CPUs 1, 2, and 3. Because such
systems have existed in the past and might still exist, the code needs
to gracefully handle this situation.
This commit therefore checks to see whether the desired CPU is present
in cpu_possible_mask, and, if not, searches for the next CPU. This means
that the systems administrator of a system with a sparse cpu_possible_mask
will need to account for this sparsity when specifying the value of
the rcupdate.rcu_task_enqueue_lim kernel boot parameter. For example,
setting this parameter to the value 4 will use only CPUs 0 and 4, which
CPU 4 getting three times the callback load of CPU 0.
This commit assumes that bit (nr_cpu_ids - 1) is always set in
cpu_possible_mask.
Link: https://lore.kernel.org/lkml/CANn89iKaNEwyNZ=L_PQnkH0LP_XjLYrr_dpyRKNNoDJaWKdrmg@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the show_rcu_tasks_generic_gp_kthread() function only looks
at CPU 0's callback lists. Although this is not fatal, it can confuse
debugging efforts in cases where any of the Tasks RCU flavors are in
per-CPU queueing mode. This commit therefore causes this function to
scan all CPUs' callback queues.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The use of hrtimers for RCU-tasks grace-period delays works well in
general, but can result in excessive grace-period delays for some
corner-case workloads. This commit therefore reverts to the use of
timers for non-RT kernels to mitigate those grace-period delays.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The synchronous RCU-tasks grace-period-wait primitives invoke
schedule_timeout_idle() to give readers a chance to exit their
read-side critical sections. Unfortunately, this fails during early
boot on PREEMPT_RT because PREEMPT_RT relies solely on ksoftirqd to run
timer handlers. Because ksoftirqd cannot operate until its kthreads
are spawned, there is a brief period of time following scheduler
initialization where PREEMPT_RT cannot run the timer handlers that
schedule_timeout_idle() relies on, resulting in a hang.
To avoid this boot-time hang, this commit replaces schedule_timeout_idle()
with schedule_hrtimeout(), so that the timer expires in hardirq context.
This is ensures that the timer fires even on PREEMPT_RT throughout the
irqs-enabled portions of boot as well as during runtime.
The timer is set to expire between fract and fract + HZ / 2 jiffies in
order to align with any other timers that might expire during that time,
thus reducing the number of wakeups.
Note that RCU-tasks grace periods are infrequent, so the use of hrtimer
should be fine. In contrast, in common-case code, user of hrtimer
could result in performance issues.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The main Tasks RCU quiescent state is voluntary context switch. However,
userspace execution is also a valid quiescent state, and is a valuable one
for userspace applications that spin repeatedly executing light-weight
non-sleeping system calls. Currently, such an application can delay a
Tasks RCU grace period for many tens of seconds.
This commit therefore enlists the aid of the scheduler-clock interrupt to
provide a Tasks RCU quiescent state when it interrupted a task executing
in userspace.
[ paulmck: Apply feedback from kernel test robot. ]
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Neil Spring <ntspring@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The waitqueue used by rcu_tasks_kthread() has always only one waiter.
With a guaranteed only one waiter, this can be replaced with rcuwait
which is smaller and simpler. With rcuwait based wake counterpart, the
irqwork function (call_rcu_tasks_iw_wakeup()) can be invoked hardirq
context because it is only a wake up and no sleeping locks are involved
(unlike the wait_queue_head).
As a side effect, this is also one piece of the puzzle to pass the RCU
selftest at early boot on PREEMPT_RT.
Replace wait_queue_head with rcuwait and let the irqwork run in hardirq
context on PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
RCU-tasks stall-warning messages are printed after the grace period is ten
minutes old. Unfortunately, most of us will have rebooted the system in
response to an apparently-hung command long before the ten minutes is up,
and will thus see what looks to be a silent hang.
This commit therefore adds pr_info() messages that are printed earlier.
These should avoid being classified as errors, but should give impatient
users a hint. These are controlled by new rcupdate.rcu_task_stall_info
and rcupdate.rcu_task_stall_info_mult kernel-boot parameters. The former
defines the initial delay in jiffies (defaulting to 10 seconds) and the
latter defines the multiplier (defaulting to 3). Thus, by default, the
first message will appear 10 seconds into the RCU-tasks grace period,
the second 40 seconds in, and the third 160 seconds in. There would be
a fourth at 640 seconds in, but the stall warning message appears 600
seconds in, and once a stall warning is printed for a given grace period,
no further informational messages are printed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping
online cpumask stable. The transient online mask results in below
calltrace.
[ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.346652] Detected PIPT I-cache on CPU2
[ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.377255] Detected PIPT I-cache on CPU3
[ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.379040] ------------[ cut here ]------------
[ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138
[ 0.384850] Modules linked in:
[ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13
[ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT)
[ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.388308] pc : __flush_work+0x12c/0x138
[ 0.388970] lr : __flush_work+0x80/0x138
[ 0.389620] sp : ffffffc00aaf3c60
[ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48
[ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100
[ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28
[ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9
[ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550
[ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000
[ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000
[ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000
[ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c
[ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000
[ 0.401886] Call trace:
[ 0.402309] __flush_work+0x12c/0x138
[ 0.402941] schedule_on_each_cpu+0x228/0x278
[ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144
[ 0.404502] rcu_tasks_kthread+0x220/0x254
[ 0.405264] kthread+0x174/0x1ac
[ 0.405837] ret_from_fork+0x10/0x20
[ 0.406456] irq event stamp: 102
[ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4
[ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c
[ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c
[ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c
[ 0.411890] ---[ end trace 0000000000000000 ]---
[ 0.413000] smp: Brought up 1 node, 4 CPUs
[ 0.413762] SMP: Total of 4 processors activated.
[ 0.414566] CPU features: detected: 32-bit EL0 Support
[ 0.415414] CPU features: detected: 32-bit EL1 Support
[ 0.416278] CPU features: detected: CRC32 instructions
[ 0.447021] Callback from call_rcu_tasks_rude() invoked.
[ 0.506693] Callback from call_rcu_tasks() invoked.
This commit therefore fixes this issue by applying a single-CPU
optimization to the RCU Tasks Rude grace-period process. The key point
here is that the purpose of this RCU flavor is to force a schedule on
each online CPU since some past event. But the rcu_tasks_rude_wait_gp()
function runs in the context of the RCU Tasks Rude's grace-period kthread,
so there must already have been a context switch on the current CPU since
the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude().
So if there is only a single CPU online, RCU Tasks Rude's grace-period
kthread does not need to anything at all.
It turns out that the rcu_tasks_rude_wait_gp() function's call to
schedule_on_each_cpu() causes problems during early boot. During that
time, there is only one online CPU, namely the boot CPU. Therefore,
applying this single-CPU optimization fixes early-boot instances of
this problem.
Link: https://lore.kernel.org/lkml/20220210184319.25009-1-treasure4paddy@gmail.com/T/
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_spawn_gp_kthread() function is called as an early initcall, which
means that SMP initialization hasn't happened yet and only the boot CPU is
online. Therefore, create only the NOCB kthreads related to the boot CPU.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_spawn_gp_kthread() function is called as an early initcall,
which means that SMP initialization hasn't happened yet and only the
boot CPU is online. Therefore, create only the boost kthread for the
leaf node of the boot CPU.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_init() function is called way before SMP is initialized and
therefore only the boot CPU should be online at this stage.
Simplify the boot per-cpu initialization accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the RCU nocb initialization witness within rcu_state
to consolidate RCU's global state.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_is_nocb_cpu() function is no longer used, so this commmit
removes it.
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Zqiang
Paul E. McKenney
Yipeng Zou
Frederic Weisbecker
Joel Fernandes (Google)
Zhen Lei
Pingfan Liu
Uladzislau Rezki (Sony)
Michal Hocko
Linus Torvalds
Neeraj Upadhyay
Johannes Berg
Patrick Wang
Roman Gushchin
Christoph Hellwig
Petr Mladek
Li Qiong
Anna-Maria Behnsen
Waiman Long
Kalesh Singh
Uladzislau Rezki
Lukas Bulwahn
John Ogness
David Vernet
Eric Dumazet
Sebastian Andrzej Siewior
Padmanabha Srinivasaiah