Граф коммитов

5241 Коммитов

Автор SHA1 Сообщение Дата
Benjamin Herrenschmidt a14953597b powerpc: Fix missing 'blr' in _tlbia()
Rework to MMU code dropped a much missed 'blr' instruction.

Brown-Paper-Bag-Worn-By: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:25 -07:00
Scott Wood 49e6e3f1ae powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use
The correct #address-cells was still used for the actual translation,
so the impact is only a possibility of choosing the wrong range entry
or failing to find any match.  Most common cases were not affected.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:17 +11:00
Grant Erickson e14d77490d powerpc: Const-qualify Device Node Argument to DCR Resource Extent API
Add const qualifier to device_node argument for
dcr_resource_{start,len} as of_get_property also const-qualifies this
argument.

Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt 9dce3ce5c5 powerpc/44x: 44x TLB doesn't need "Guarded" set for all pages
After discussing with chip designers, it appears that it's not
necessary to set G everywhere on 440 cores. The various core
errata related to prefetch should be sorted out by firmware by
disabling icache prefetching in CCR0. We add the workaround to
the kernel however just in case oooold firmwares don't do it.

This is valid for -all- 4xx core variants. Later ones hard wire
the absence of prefetch but it doesn't harm to clear the bits
in CCR0 (they should already be cleared anyway).

We still leave G=1 on the linear mapping for now, we need to
stop over-mapping RAM to be able to remove it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt 64b3d0e812 powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDED
Currently, we never set _PAGE_COHERENT in the PTEs, we just OR it in
in the hash code based on some CPU feature bit.  We also manipulate
_PAGE_NO_CACHE and _PAGE_GUARDED by hand in all sorts of places.

This changes the logic so that instead, the PTE now contains
_PAGE_COHERENT for all normal RAM pages thay have I = 0 on platforms
that need it.  The hash code clears it if the feature bit is not set.

It also adds some clean accessors to setup various valid combinations
of access flags and change various bits of code to use them instead.

This should help having the PTE actually containing the bit
combinations that we really want.

I also removed _PAGE_GUARDED from _PAGE_BASE on 44x and instead
set it explicitely from the TLB miss.  I will ultimately remove it
completely as it appears that it might not be needed after all
but in the meantime, having it in the TLB miss makes things a
lot easier.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt 7752035180 powerpc/mm: Runtime allocation of mmu context maps for nohash CPUs
This makes the MMU context code used for CPUs with no hash table
(except 603) dynamically allocate the various maps used to track
the state of contexts.

Only the main free map and CPU 0 stale map are allocated at boot
time.  Other CPU maps are allocated when those CPUs are brought up
and freed if they are unplugged.

This also moves the initialization of the MMU context management
slightly later during the boot process, which should be fine as
it's really only needed when userland if first started anyways.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt 760ec0e02d powerpc/44x: No need to mask MSR:CE, ME or DE in _tlbil_va on 440
The handlers for Critical, Machine Check or Debug interrupts
will save and restore MMUCR nowadays, thus we only need to
disable normal interrupts when invalidating TLB entries.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt 2a4aca1144 powerpc/mm: Split low level tlb invalidate for nohash processors
Currently, the various forms of low level TLB invalidations are all
implemented in misc_32.S for 32-bit processors, in a fairly scary
mess of #ifdef's and with interesting duplication such as a whole
bunch of code for FSL _tlbie and _tlbia which are no longer used.

This moves things around such that _tlbie is now defined in
hash_low_32.S and is only used by the 32-bit hash code, and all
nohash CPUs use the various _tlbil_* forms that are now moved to
a new file, tlb_nohash_low.S.

I moved all the definitions for that stuff out of
include/asm/tlbflush.h as they are really internal mm stuff, into
mm/mmu_decl.h

The code should have no functional changes.  I kept some variants
inline for trivial forms on things like 40x and 8xx.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt f048aace29 powerpc/mm: Add SMP support to no-hash TLB handling
This commit moves the whole no-hash TLB handling out of line into a
new tlb_nohash.c file, and implements some basic SMP support using
IPIs and/or broadcast tlbivax instructions.

Note that I'm using local invalidations for D->I cache coherency.

At worst, if another processor is trying to execute the same and
has the old entry in its TLB, it will just take a fault and re-do
the TLB flush locally (it won't re-do the cache flush in any case).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt 7c03d653cd powerpc/mm: Introduce MMU features
We're soon running out of CPU features and I need to add some new
ones for various MMU related bits, so this patch separates the MMU
features from the CPU features.  I moved over the 32-bit MMU related
ones, added base features for MMU type families, but didn't move
over any 64-bit only feature yet.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt 2ca8cf7389 powerpc/mm: Rework context management for CPUs with no hash table
This reworks the context management code used by 4xx,8xx and
freescale BookE.  It adds support for SMP by implementing a
concept of stale context map to lazily flush the TLB on
processors where a context may have been invalidated.  This
also contains the ground work for generalizing such lazy TLB
flushing by just picking up a new PID and marking the old one
stale.  This will be implemented later.

This is a first implementation that uses a global spinlock.

Ideally, we should try to get at least the fast path (context ID
already assigned) lockless or limited to a per context lock,
but for now this will do.

I tried to keep the UP case reasonably simple to avoid adding
too much overhead to 8xx which does a lot of context stealing
since it effectively has only 16 PIDs available.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Benjamin Herrenschmidt 5e696617c4 powerpc/mm: Split mmu_context handling
This splits the mmu_context handling between 32-bit hash based
processors, 64-bit hash based processors and everybody else.  This is
preliminary work for adding SMP support for BookE processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Benjamin Herrenschmidt 6d2170be45 powerpc/4xx: Extended DCR support v2
This adds supports to the "extended" DCR addressing via the indirect
mfdcrx/mtdcrx instructions supported by some 4xx cores (440H6 and
later).

I enabled the feature for now only on AMCC 460 chips.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Brian King fecba96268 powerpc: Add reboot notifier to Collaborative Memory Manager
When running Active Memory Sharing, pages can get marked as
"loaned" with the hypervisor by the CMM driver. This state gets
cleared by the system firmware when rebooting the partition.
When using kexec to boot a new kernel, this state never gets
cleared and the hypervisor and CMM driver can get out of sync
with respect to the number of pages currently marked "loaned".
Fix this by adding a reboot notifier to the CMM driver to deflate
the balloon and mark all pages as active.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Brian King 2218108e18 powerpc: Disable Collaborative Memory Manager for kdump
When running Active Memory Sharing, the Collaborative Memory Manager
(CMM) may mark some pages as "loaned" with the hypervisor.
Periodically, the CMM will query the hypervisor for a loan request,
which is a single signed value.  When kexec'ing into a kdump kernel,
the CMM driver in the kdump kernel is not aware of the pages the
previous kernel had marked as "loaned", so the hypervisor and the CMM
driver are out of sync.  This results in the CMM driver getting a
negative loan request, which can then get treated as a large unsigned
value and can cause kdump to hang due to the CMM driver inflating too
large.  Since there really is no clean way for the CMM driver in the
kdump kernel to clean this up, simply disable CMM in the kdump kernel.
This fixes hangs we were seeing doing kdump with AMS.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Stephen Rothwell 5d84e4bee0 powerpc/iseries: viodasd needs to depend on CONFIG_BLOCK
Otherwise you get lot of errors like these:

drivers/block/viodasd.c:72: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_open':
drivers/block/viodasd.c:135: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_release':
drivers/block/viodasd.c:184: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_getgeo':
drivers/block/viodasd.c:209: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c:214: error: implicit declaration of function 'get_capacity'
drivers/block/viodasd.c: At top level:
drivers/block/viodasd.c:222: error: variable 'viodasd_fops' has initializer but incomplete type
drivers/block/viodasd.c:223: error: unknown field 'owner' specified in initializer

Discovered by a randconfig build.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Tony Breeds 532774ec7f powerpc: Pass a valid token to rtas_call() in phyp-dump code
ibm_configure_kernel_dump is passed as the token to rtas_call() is
never initialised.  This sets it to something sane.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Manish Ahuja <mahujam@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Tony Breeds 7a2eab0d4e powerpc: Protect against NULL pointer deref in phyp-dump code
print_dump_header() will be called at least once with a NULL pointer in
a normal boot sequence.  If DEBUG is defined then we will dereference
the pointer and crash.  Add a quick fix to exit early in the NULL pointer
case.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Manish Ahuja <mahujam@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
David Howells 8168b5400b powerpc: Rename struct vm_region to avoid conflict with NOMMU
Rename PowerPC's struct vm_region so that I can introduce my own
global version for NOMMU.  It's feasible that the PowerPC version may
wish to use my global one instead.

The NOMMU vm_region struct defines areas of the physical memory map
that are under mmap.  This may include chunks of RAM or regions of
memory mapped devices, such as flash.  It is also used to retain
copies of file content so that shareable private memory mappings of
files can be made.  As such, it may be compatible with what is
described in the banner comment for PowerPC's vm_region struct.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Nathan Lynch 13ba3c0092 powerpc: Convert sysfs cache code to of_find_next_cache_node()
Using the common code means that more complete cache information will
provided in sysfs on platforms that don't use the l2-cache property
convention.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Nathan Lynch b2ea25b958 powerpc: Convert cpu_to_l2cache() to of_find_next_cache_node()
The smp code uses cache information to populate cpu_core_map; change
it to use common code for cache lookup.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Nathan Lynch e523f723d6 powerpc: Add of_find_next_cache_node()
We have more than one piece of code that looks up cache nodes manually
using the "l2-cache" property.  Add a common helper routine which does
this and handles ePAPR's "next-level-cache" property as well as
powermac.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Paul Mackerras c280266a32 Merge branch 'linux-2.6' into next 2008-12-18 11:06:12 +11:00
Guillaume Knispel af4d364386 powerpc: Fix corruption error in rh_alloc_fixed()
There is an error in rh_alloc_fixed() of the Remote Heap code:
If there is at least one free block blk won't be NULL at the end of the
search loop, so -ENOMEM won't be returned and the else branch of
"if (bs == s || be == e)" will be taken, corrupting the management
structures.

Signed-off-by: Guillaume Knispel <gknispel@proformatique.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-17 10:06:14 -06:00
Dave Liu 28707af01b powerpc/fsl-booke: Fix the miss interrupt restore
The commit e5e774d883
powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted
introduce one issue. that casue the problem like this:

Kernel BUG at c00b19fc [verbose debug info unavailable]
Oops: Exception in kernel mode, sig: 5 [#1]
MPC8572 DS
Modules linked in:
NIP: c00b19fc LR: c00b1c34 CTR: c0064e88
REGS: ef02b7b0 TRAP: 0700   Not tainted  (2.6.28-rc8-00057-g1bda712)
MSR: 00021000 <ME>  CR: 44048028  XER: 20000000
TASK = ef02c000[1] 'init' THREAD: ef02a000
GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400
GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948
GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1
GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984
NIP [c00b19fc] __find_get_block+0x24/0x238
LR [c00b1c34] __getblk+0x24/0x2a0
Call Trace:
[ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable)
[ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0
[ef02b910] [c00b4ae4] __bread+0x14/0xf8
[ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138
[ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828
[ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808
[ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144
[ef02bb50] [c00fba38] ext2_readpages+0x24/0x34
[ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230
[ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0
[ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0
[ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4
[ef02bd10] [c000ed90] handle_page_fault+0xc/0x80
[ef02bdd0] [c00c7adc] set_brk+0x74/0x9c
[ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180
[ef02be70] [c00945f0] search_binary_handler+0xa8/0x274
[ef02bea0] [c0095818] do_execve+0x19c/0x1d4
[ef02bed0] [c000766c] sys_execve+0x58/0x84
[ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c
[ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c
[ef02bfc0] [c0001e04] init_post+0xb0/0xf0
[ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4
[ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68
Instruction dump:
4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034
91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008

The issue was the beqlr returns early but we haven't reenabled interrupts.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-17 10:06:13 -06:00
Paul Mackerras eddce368f9 Merge branch 'next' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into next 2008-12-17 11:01:43 +11:00
Kay Sievers aab0d375e0 powerpc: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:38 +11:00
Benjamin Herrenschmidt f63837f058 powerpc/mm: Remove flush_HPTE()
The function flush_HPTE() is used in only one place, the implementation
of DEBUG_PAGEALLOC on ppc32.

It's actually a dup of flush_tlb_page() though it's -slightly- more
efficient on hash based processors.  We remove it and replace it by
a direct call to the hash flush code on those processors and to
flush_tlb_page() for everybody else.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:34 +11:00
Benjamin Herrenschmidt e41e811a79 powerpc/mm: Rename tlb_32.c and tlb_64.c to tlb_hash32.c and tlb_hash64.c
This renames the files to clarify the fact that they are used by
the hash based family of CPUs (the 603 being an exception in that
family but is still handled by that code).

This paves the way for the new tlb_nohash.c coming via a subsequent
commit.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:30 +11:00
Benjamin Herrenschmidt 1a37a3fd7f powerpc/mm: Add local_flush_tlb_mm() to SW loaded TLB implementations
This adds a local_flush_tlb_mm() call as a pre-requisite for some
SMP work for BookE processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:26 +11:00
Benjamin Herrenschmidt a58f053b93 powerpc: Fix asm EMIT_BUG_ENTRY with !CONFIG_BUG
Instead of not defining it at all, this defines the macro as
being empty, thus avoiding ifdef's in call sites when CONFIG_BUG
is not set.

Also removes an extra whitespace in the existing definition.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:23 +11:00
FUJITA Tomonori 3045b3cb0b powerpc: Remove dead BIO_VMERGE_BOUNDARY definition
The block layer dropped the virtual merge feature
(b8b3e16cfe).  BIO_VMERGE_BOUNDARY
definition is meaningless now (For POWER, BIO_VMERGE_BOUNDARY has been
meaningless for a long time since POWER disables the virtual merge
feature).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:19 +11:00
Josh Boyer 7fe519c207 powerpc: Introduce ppc_pci_flags accessors
Currently there are a number of platforms that open code access to
the ppc_pci_flags global variable.  However, that variable is not
present if CONFIG_PCI is not set, which can lead to a build break.

This introduces a number of accessor functions that are defined
to be empty in the case of CONFIG_PCI being disabled.  The
various platform files in the kernel are updated to use these.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:16 +11:00
Nathan Lynch edc72ac4a0 powerpc/pseries: Check for GIQ indicator before calling set-indicator
Since "Factor out cpu joining/unjoining the GIQ"
(b4963255ad) the WARN_ON in
xics_set_cpu_giq() is being triggered during boot on JS20 because the
GIQ indicator is not available on that platform.  While the warning is
harmless and the system runs normally, it's nicer to check for the
existence of the indicator before trying to manipulate it.

Implement rtas_indicator_present(), which searches the
/rtas/rtas-indicators property for the given indicator token, and use
this function in xics_set_cpu_giq().

Also use a WARN statement in xics_set_cpu_giq to get better
information on failure.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:13 +11:00
Nathan Lynch 6ff04c53db powerpc/powermac: Use set_hard_smp_processor_id() instead of smp_hw_index
The hard_smp_processor_id functions are the appropriate interfaces for
managing physical CPU ids.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:09 +11:00
Nathan Lynch 13a9801eb6 powerpc: Move smp_hw_index to 32-bit code
smp_hw_index isn't used on 64-bit, so move it from smp.c to
setup_32.c.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:53:05 +11:00
Anton Vorontsov 6b82b3e4b5 powerpc: Remove `have_of' global variable
The `have_of' variable is a relic from the arch/ppc time, it isn't
useful nowadays.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 15:52:57 +11:00
Becky Bruce 0efbb57e06 powerpc: Fix !CONFIG_PPC_NEED_DMA_SYNC_OPS build warning
Change #define stubs of dma_sync ops to be empty static inlines
to avoid build warning.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 14:39:33 +11:00
Geert Uytterhoeven 46d01492b2 powerpc/ps3: Add sub-match id modalias support
commit 059e4938f8 ("powerpc/ps3: Add a sub-match
id to ps3_system_bus") forgot to update the module alias support:
  - Add the sub-match ids to the module aliases, so udev can distinguish
    between different types of sub-devices.
  - Rename PS3_MODULE_ALIAS_GRAPHICS to PS3_MODULE_ALIAS_GPU_FB, as ps3fb
    binds to the "FB" sub-device.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 14:39:33 +11:00
Geoff Levand 62d80749ad powerpc/ps3: Quiet dmesg output
Change the debug message in dma_sb_region_create() from
pr_info() to DBG() to quiet the dmesg output.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 14:39:32 +11:00
Geoff Levand 15cb1cc981 powerpc: Fix typo in pgtable-ppc64.h
Fix a minor comment typo in pgtable-ppc64.h.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 14:39:32 +11:00
Nicolas Palix 29e931c02b powerpc/chrp: Add missing of_node_put in pci.c
of_node_put is needed before discarding a value received from
of_find_node_by_name, eg in error handling code or when the device
node is no longer used.

The semantic match that catches the bug is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression struct device_node *n;
position p1, p2;
statement S1,S2;
expression E,E1;
expression *ptr != NULL;
@@

(
if (!(n@p1 = of_find_node_by_name(...))) S1
|
n@p1 = of_find_node_by_name(...)
)
<... when != of_node_put(n)
    when != if (...) { <+... of_node_put(n) ...+> }
    when != true !n  || ...
    when != n = E
    when != E = n
if (!n || ...) S2
...>
(
  return \(0\|<+...n...+>\|ptr\);
|
return@p2 ...;
|
n = E1
|
E1 = n
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s of_find_node_by_name %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Nicolas Palix <npalix@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 14:39:32 +11:00
Paul Mackerras 1e1c568d6c Merge branch 'merge' into next 2008-12-16 14:38:58 +11:00
Arnd Bergmann 23e0e8afaf powerpc/cell/axon-msi: Fix MSI after kexec
Commit d015fe995 'powerpc/cell/axon-msi: Retry on missing interrupt'
has turned a rare failure to kexec on QS22 into a reproducible
error, which we have now analysed.

The problem is that after a kexec, the MSIC hardware still points
into the middle of the old ring buffer.  We set up the ring buffer
during reboot, but not the offset into it.  On older kernels, this
would cause a storm of thousands of spurious interrupts after a
kexec, which would most of the time get dropped silently.

With the new code, we time out on each interrupt, waiting for
it to become valid.  If more interrupts come in that we time
out on, this goes on indefinitely, which eventually leads to
a hard crash.

The solution in this commit is to read the current offset from
the MSIC when reinitializing it.  This now works correctly, as
expected.

Reported-by: Dirk Herrendoerfer <d.herrendoerfer@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 13:48:18 +11:00
Dave Hansen a4c74ddd5e powerpc: Fix bootmem reservation on uninitialized node
careful_allocation() was calling into the bootmem allocator for
nodes which had not been fully initialized and caused a previous
bug:  http://patchwork.ozlabs.org/patch/10528/  So, I merged a
few broken out loops in do_init_bootmem() to fix it.  That changed
the code ordering.

I think this bug is triggered by having reserved areas for a node
which are spanned by another node's contents.  In the
mark_reserved_regions_for_nid() code, we attempt to reserve the
area for a node before we have allocated the NODE_DATA() for that
nid.  We do this since I reordered that loop.  I suck.

This is causing crashes at bootup on some systems, as reported
by Jon Tollefson.

This may only present on some systems that have 16GB pages
reserved.  But, it can probably happen on any system that is
trying to reserve large swaths of memory that happen to span other
nodes' contents.

This commit ensures that we do not touch bootmem for any node which
has not been initialized, and also removes a compile warning about
an unused variable.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 13:48:18 +11:00
Brian King 48f797de55 powerpc: Check for valid hugepage size in hugetlb_get_unmapped_area
It looks like most of the hugetlb code is doing the correct thing if
hugepages are not supported, but the mmap code is not.  If we get into
the mmap code when hugepages are not supported, such as in an LPAR
which is running Active Memory Sharing, we can oops the kernel.  This
fixes the oops being seen in this path.

oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=1024 NUMA pSeries
Modules linked in: nfs(N) lockd(N) nfs_acl(N) sunrpc(N) ipv6(N) fuse(N) loop(N)
dm_mod(N) sg(N) ibmveth(N) sd_mod(N) crc_t10dif(N) ibmvscsic(N)
scsi_transport_srp(N) scsi_tgt(N) scsi_mod(N)
Supported: No
NIP: c000000000038d60 LR: c00000000003945c CTR: c0000000000393f0
REGS: c000000077e7b830 TRAP: 0300   Tainted: G
(2.6.27.5-bz50170-2-ppc64)
MSR: 8000000000009032 <EE,ME,IR,DR>  CR: 44000448  XER: 20000001
DAR: c000002000af90a8, DSISR: 0000000040000000
TASK = c00000007c1b8600[4019] 'hugemmap01' THREAD: c000000077e78000 CPU: 6
GPR00: 0000001fffffffe0 c000000077e7bab0 c0000000009a4e78 0000000000000000
GPR04: 0000000000010000 0000000000000001 00000000ffffffff 0000000000000001
GPR08: 0000000000000000 c000000000af90c8 0000000000000001 0000000000000000
GPR12: 000000000000003f c000000000a73880 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000010000
GPR20: 0000000000000000 0000000000000003 0000000000010000 0000000000000001
GPR24: 0000000000000003 0000000000000000 0000000000000001 ffffffffffffffb5
GPR28: c000000077ca2e80 0000000000000000 c00000000092af78 0000000000010000
NIP [c000000000038d60] .slice_get_unmapped_area+0x6c/0x4e0
LR [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80
Call Trace:
[c000000077e7bbc0] [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80
[c000000077e7bc30] [c000000000107e30] .get_unmapped_area+0x64/0xd8
[c000000077e7bcb0] [c00000000010b140] .do_mmap_pgoff+0x140/0x420
[c000000077e7bd80] [c00000000000bf5c] .sys_mmap+0xc4/0x140
[c000000077e7be30] [c0000000000086b4] syscall_exit+0x0/0x40
Instruction dump:
fac1ffb0 fae1ffb8 fb01ffc0 fb21ffc8 fb41ffd0 fb61ffd8 fb81ffe0 fbc1fff0
fbe1fff8 f821fef1 f8c10158 f8e10160 <7d49002e> f9010168 e92d01b0 eb4902b0

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-16 13:48:18 +11:00
Kumar Gala 91cac62326 powerpc/85xx: Fix compile issues with mpc8572ds.dts
Fix the localbus reg & range properties to respect that the top
level #address-cells and #size-cells = 2.  The original commit
(c64ef80b51) did not do that.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15 14:29:38 -06:00
Benjamin Herrenschmidt 8309ce7280 powerpc: Fix bogus cache flushing on all 40x and BookE processors v2
We were missing the CPU_FTR_NOEXECUTE bit in our cputable for all
these processors. The result is that update_mmu_cache() would flush
the cache for all pages mapped to userspace which is totally
unnecessary on those processors since we already handle flushing
on execute in the page fault path.

This should provide a nice speed up ;-)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-15 14:29:37 -06:00
Linus Torvalds cefb3d02ca Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted
2008-12-14 16:25:19 -08:00
Kumar Gala e5e774d883 powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted
An example calling sequence which we did see:

copy_user_highpage -> kmap_atomic -> flush_tlb_page -> _tlbil_va

We got interrupted after setting up the MAS registers before the
tlbwe and the interrupt handler that caused the interrupt also did
a kmap_atomic (ide code) and thus on returning from the interrupt
the MAS registers no longer contained the proper values.

Since we dont save/restore MAS registers for normal interrupts we
need to disable interrupts in _tlbil_va to ensure atomicity.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-13 17:02:47 -06:00