As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
For USB 2.0 compliance, eUSB2 needs a repeater. The PHY needs to
initialize and reset it. So add repeater support
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
PM8550B contains a eUSB2 repeater used for making the eUSB2 from
SM8550 USB 2.0 compliant. This can be modelled SW-wise as a Phy.
So add a new phy driver for it.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dp and ufp are defined as bool type, the return value type of
function extcon_get_state should be int, so the type of dp and ufp
are modified to int.
./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes in drivers for:
- Binding fix for g12a phys
- Kconfig operator precedence for TI driver
- renesas: register setting
- sunplus: null deref fix
- rockchip-inno fix for clk_disable_unprepare()
- MDM9607 init sequence revert due to regression
-----BEGIN PGP SIGNATURE-----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=MDsZ
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-6.2' into next
Merge fixes tag pulled into mainline by Linus into phy/next due to
dependency on amlogic patches
The existing logic in tcphy_get_mode() can cause the phy to be
incorrectly configured to USB UFP or DisplayPort mode when
extcon_get_state returns an error code.
extcon_get_state() can return 0, 1, or a negative error code.
It is possible to get into the failing state with an extcon driver
which does not support the extcon connector id specified as the
second argument to extcon_get_state().
tcphy_get_mode()
->extcon_get_state()
-->find_cable_index_by_id()
--->return -EINVAL;
Fixes: e96be45cb8 ("phy: Add USB Type-C PHY driver for rk3399")
Signed-off-by: Neill Kapron <nkapron@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230126001013.3707873-1-nkapron@google.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver was missing to include couple of headers explictly which
causes build to fail on other archs
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c: In function 'qcom_snps_eusb2_hsphy_write_mask':
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:147:15: error: implicit declaration of function 'readl_relaxed' [-Werror=implicit-function-declaration]
147 | reg = readl_relaxed(base + offset);
| ^~~~~~~~~~~~~
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:150:9: error: implicit declaration of function 'writel_relaxed' [-Werror=implicit-function-declaration]
150 | writel_relaxed(reg, base + offset);
| ^~~~~~~~~~~~~~
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c: In function 'qcom_eusb2_default_parameters':
drivers/phy/qualcomm/phy-qcom-snps-eusb2.c:161:42: error: implicit declaration of function 'FIELD_PREP' [-Werror=implicit-function-declaration]
161 | FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0));
| ^~~~~~~~~~
Fix this by adding bitfield.h and iopoll.h explictly
Fixes: 80090810f5 ("phy: qcom: Add QCOM SNPS eUSB2 driver")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.
Add the new DP specific offsets in the generic qmp header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB.
Add the new PCS USB specific offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SM8550 SoC uses Synopsis eUSB2 PHY for USB 2.0.
Add a new driver for it.
The driver is based on a downstream implementation.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208183421.2874423-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the SM8550 both g4 and g3 configurations. In addition, there is a
new "lane shared" table that needs to be configured for g4, along with
the No-CSR list of resets. The no-CSR allows resetting the PHY without
actually dropping the PHY configuration. The no-CSR needs to be
deasserted only after the PHY has been configured and the PLL has
stabilized.
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-9-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-8-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-7-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS PCIE specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS offsets in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The MIPI phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DisplayPort phy is actually part of the Power Management Unit system
controller, thus it should be its child, instead of sibling node with
syscon phandle.
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230127194057.186458-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Introduce a config option for each QMP PHY driver now that the QMP PHY
mega-driver has been split up into different modules. This allows kernel
configurators to limit the binary size of the kernel by only compiling
in the QMP PHY driver that they need.
Leave the old config QCOM_QMP in place and make it into a menuconfig so
that 'make olddefconfig' continues to work. Furthermore, set the default
of the new Kconfig symbols to be QCOM_QMP so that the transition is
smooth.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230202215330.2152726-1-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6NOF
-----END PGP SIGNATURE-----
Merge tag 'phy-devm_of_phy_optional_get' into next
Merge tag phy-devm_of_phy_optional_get into next to bring in the new
devm_of_phy_optional_get() API and users
Remove the temporary @mask_, this may cause build warning when use clang
compiler for powerpc, but can't reproduce it when compile for arm64.
the build warning is caused by:
"warning: result of comparison of constant 18446744073709551615 with
expression of type (aka 'unsigned long') is always false
[-Wtautological-constant-out-of-range-compare]"
More information provided in below lore link.
After removing @mask_, there is a "CHECK:MACRO_ARG_REUSE" when run
checkpatch.pl, but due to @mask is constant, no reuse problem will happen.
Link: https://lore.kernel.org/lkml/202212160357.jJuesD8n-lkp@intel.com/t/
Fixes: 84513eccd6 ("phy: mediatek: fix build warning of FIELD_PREP()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118084343.26913-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS UFS specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-6-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new qserdes TX RX but UFS specific offsets
in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-5-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new qserdes TX RX offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-4-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new qserdes com offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230117224148.1914627-3-abel.vesa@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.
Fixes: a4a86d273f ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sdx64 uniphy gen3x1 PHY references the qmp_v4_usb3phy_regs_layout
while the PHY itself uses v5 regs. While there are only minor
differences between v4 and v5 regs and none of them concerns registers
mentions in regs_layout, switch the PHY to use
qmp_v5_usb3phy_regs_layout, to remove possible confusion.
Fixes: 14d98d3bf7 ("phy: qcom-qmp-usb: fix regs layout arrays")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113212138.421583-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sm8450 gen3x1 PHY references the pciephy_v4_regs_layout while the
PHY itself uses v5 regs. While there are only minor differences between
v4 and v5 regs and none of them concerns registers mentions in
regs_layout, switch the PHY to use pciephy_v5_regs_layout to remove
possible confusion.
Fixes: bbe207a1ab ("phy: qcom-qmp-pcie: rename regs layout arrays")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113212138.421583-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.
Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113212102.421491-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All currently known QMP UFS PHYs have the same offsets for register
sub-regions. Instead of using qmp_ufs_offsets_v5 for older generations
of PHYs, rename the offsets struct instance to remove _v5 suffix.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230113195515.407866-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The WIZ acts as a wrapper for SerDes and has Lanes 0 and 2 reserved
for USB for type-C lane swap if Lane 1 and Lane 3 are linked to the
USB PHY that is integrated into the SerDes IP. The WIZ control register
has to be configured to support this lane swap feature.
The support for swapping lanes 2 and 3 is missing and therefore
add support to configure the control register to swap between
lanes 2 and 3 if PHY type is USB.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230113150615.19375-3-sinthu.raja@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It's possible that the Type-C plug orientation on the DIR line will be
implemented through hardware design. In that situation, there won't be
an external GPIO line available, but the driver still needs to address
this since the DT won't use the typec-dir-gpios property.
Add code to handle LN10 Type-C swap if typec-dir-gpios property is not
specified in DT.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230113150615.19375-2-sinthu.raja@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
UFS PHY in SC8280XP SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init
sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance
reusing the G4 init sequence of SM8350.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SM8350 default init sequence sets some PCS registers to HS G3, thereby
disabling HS G4 mode. This has the effect on MPHY capability negotiation
between the host and the device during link startup and causes the
PA_MAXHSGEAR to G3 irrespective of device max gear.
Due to that, the agreed gear speed determined by the UFS core will become
G3 only and the platform won't run at G4.
So, let's remove setting these registers for SM8350 as like other G4
compatible platforms. One downside of this is that, when the board design
uses non-G4 compatible device, then MPHY will continue to run in the
default mode (G4) even if UFSHCD runs in G3. But this is the case for
other platforms as well.
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
UFS PHY in SM8250 SoC is capable of operating at HS G4 mode. Hence, add the
required register settings using the tables_hs_g4 struct instance. This
also requires a separate qmp_phy_cfg for SM8250 instead of reusing SM8150.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-9-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since now there is support for configuring the HS Rate B mode properly,
let's move the register setting to tbls_hs_b struct for all SoCs.
This allows the PHY to be configured in Rate A initially and then in
Rate B if requested by the UFS driver.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add separate tables_hs_g4 instance to allow the PHY driver to configure the
PHY in HS G4 mode. The individual SoC configs need to supply the Rx, Tx and
PCS register setting in tables_hs_g4 and the UFS driver can request the
Hs G4 mode by calling phy_set_mode_ext() with submode set to UFS_HS_G4.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add separate tables_hs_b instance to allow the PHY driver to configure the
PHY in HS Series B mode. The individual SoC configs need to supply the
serdes register setting in tables_hs_b and the UFS driver can request the
Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230114071009.88102-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Linus Torvalds
Neil Armstrong
Abel Vesa
Jiapeng Chong
Vinod Koul
Neill Kapron
Krzysztof Kozlowski
Stephen Boyd
Geert Uytterhoeven
Luca Weiss
Chunfeng Yun
Dmitry Baryshkov
Sinthu Raja
Manivannan Sadhasivam