gpiochip_remove() will return void eventually.
Thus this patch removes return value checking for gpiochip_remove().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel used to contain two functions for length-delimited,
case-insensitive string comparison, strnicmp with correct semantics
and a slightly buggy strncasecmp. The latter is the POSIX name, so
strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper
for the new strncasecmp to avoid breaking existing users.
To allow the compat wrapper strnicmp to be removed at some point in
the future, and to avoid the extra indirection cost, do
s/strnicmp/strncasecmp/g.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
linux/slab.h was included twice.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add support for various modules like eq etc for mrfld DSP.
All these modules will be exposed to usermode as bytes controls.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For internal stream i.e. BE we have don't need trigger ops as that
would be handled by DAPM for us in subsequent patches
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For its headphone, mic and DSP responses, we can use the standard
hda_jack infrastructure in CA0132 driver, too. The only point to
handle carefully is the delayed headphone jack handling. It tries to
react after a certain delay. Here we use the existing block_report
flag in hda_jack_tbl (that was implemented for HDMI).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous fix for STAC/IDT codecs, the automute hooks in VIA
driver can be also removed by enabling the power control callback for
all pins.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we can register multiple callbacks to each jack, most of hooks
used in STAC/IDT codecs can be removed by enabling the powermap update
callback for all relevant pins. Along with this, the call of
stac_init_power_map() can be moved back to stac_parse_auto_config()
and the own build_controls callback can be removed, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, hda_jack infrastructure allows only one callback per jack, and
this makes things slightly complicated when a driver wants to assign
multiple tasks to a jack, e.g. the standard auto-mute with a power
up/down sequence. This can be simplified if the hda_jack accepts
multiple callbacks.
This patch is such an extension: the callback-specific part (the
function and private_data) is split to another struct from
hda_jack_tbl, and multiple such objects can be assigned to a single
hda_jack_tbl entry.
The new struct hda_jack_callback is passed to each callback function
now, thus the patch became bigger than expected. But these changes
are mostly trivial.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is mostly driver fixes, the biggest one being the tlv320aic31xx
which is relatively large but simple and device specific. There's a
small fix in the error handling in DPCM too which is relatively minor
error handling fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUF2h1AAoJECTWi3JdVIfQt0UH/155GaSoLBAfnvjBBlmyTTSx
nY/kdZYB9tMR0Y35PuX1Ekd2VNaLFKTEpUsYLLCfvoKezwr0y5Trz5p78g/RoEPH
uU0Z6mQ7/5nepwy3QBnZG3s5TfSxtLA1ifGx0YGn2pY+c1qnhsPRCPTWjQ9lEsQv
f5WfIOMULKCtXT+hHLwzCeKHu1pF6SM6w5Vppys4i+Lu/Ac/7MdD2PzrSR94Y+82
5PftV9HJQil//qFcxQEUUUGPharBu7BsWn8HVqT/oN9FkglZWmHLNIvks+qHmX6/
6GTR7K2FX+2DI4mvRfTz/mb95un1UWzVQByqhhJqt/OohNfZX743ag5bn7M0HUE=
=SME3
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.17
This is mostly driver fixes, the biggest one being the tlv320aic31xx
which is relatively large but simple and device specific. There's a
small fix in the error handling in DPCM too which is relatively minor
error handling fix.
Like other fixes, convert the tasklet to a threaded irq and replace
spinlock with mutex appropriately. ak4117_lock remains as spinlock
since it's called in another spinlock context from ak4117 driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the other previous changes, this patch for lx6464es takes the
same strategy for converting to nonatomic PCM ops: replacing spinlock
with mutex, converting the irq tasklet to the threaded irq, and
merging the trigger tasklets back to the trigger callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This time PCXHR, another Digigram boards: like the previous patches,
the conversion is straightforward, replacing spinlocks with mutexes,
merging the irq tasklet into the threaded irq handler and the PCM
trigger tasklet back to the trigger callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous patch for VX boards, miXart device driver can be
also rewritten to use nonatomic PCM ops. Simply spinlocks are
replaced with mutex, the tasklet code is merged into the threaded irq
handler. Also, now mgr->msg_mutex is superfluous, so merged to
msg_lock.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rewrite VXpocket and VX222 drivers to use the new PCM nonatomic ops.
The former irq tasklet is replaced with a threaded irq handler, and
the tasklet for the PCM delayed start is simply merged into the normal
PCM trigger, as well as the replacement of spinlock with mutex.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
STAC/IDT driver calls snd_hda_jack_tbl_get() again after calling
snd_hda_jack_detect_enable_callback(). For simplifying this, let's
make snd_hda_jack_detect_enable_callback() returning the pointer while
handling the error with the standard IS_ERR() & co.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add playback/capture dma data to snd_soc_dai.
Test on RK3288 with max98090.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix SND_ROCKCHIP_I2S to be more reasonable - SND_SOC_ROCKCHIP_I2S,
SND_SOC_ROCKCHIP_I2S should select by audio driver, instead of
SND_SOC_ROCKCHIP.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As "hclk" is used for rockchip I2S controller, driver must to enable
it in probe.
Tested on RK3288 with max98090.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reference rockchip I2S controller TRM, modify some registers' property
I2S_FIFOLR: read / write, but not volatile, not precious
I2S_INTSR: read / write
I2S_CLR: volatile, register value will be cleared by read
Test on RK3288 with max98090.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix error format set to I2S master or slave mode.
Test on RK3288 board with max98090.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It can get dai_link/dai_props pointer from priv + index
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
priv has many information about simple-card driver.
Using it becomes easy to extend feature.
This patch gets dev from priv as 1st step
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF control register must be written to set the data type in hw_params
not the ADC control register.
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The action value assigned to each hda_jack_tbl entry is mostly
superfluous. The actually used values are either the widget NID or a
value specific to the callback.
The former case can be simply replaced by a reference to widget NID
itself. The only place doing the latter is STAC/IDT codec driver for
the powermap handling. But, the code doesn't need to check the action
field at all -- the function jack_update_power() is called either with
a specific pin or with NULL. So the check of jack->action can be
removed completely there, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a driver is set up without the jack detection explicitly (either
by passing a model option or via a specific fixup), the pin powermap
of IDT/STAC codecs is set up wrongly, resulting in the silence
output. It's because of a logic failure in stac_init_power_map().
It tries to avoid creating a callback for the pins that have other
auto-hp and auto-mic callbacks, but the check is done in a wrong way
at a wrong time. The stac_init_power_map() should be called after
creating other jack detection ctls, and the jack callback should be
created only for jack-detectable widgets.
This patch fixes the check in stac_init_power_map() and its callee
at the right place, after snd_hda_gen_build_controls().
Reported-by: Adam Richter <adam_richter2004@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a common storage for platform data related structures and definitions
inside kernel source tree. The patch moves file from include/linux to
include/linux/platform_data and renames it acoordingly. The users are also
updated.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[For the arch/avr32/.* and .*sound/atmel.*]
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
add NO_PERIOD_WAKEUP to PCM INFO, which supports audio no IRQ mode
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit 7c7b9cf53d ("ASoC: simple-card: fixup cpu_dai_name
clear case") changed the way that "sound-dai" properties are handled,
which leads to the clock frequency not being picked up from the
node that the phandle points to, as correctly identified by gcc
with this warning:
sound/soc/generic/simple-card.c: In function 'asoc_simple_card_sub_parse_of':
sound/soc/generic/simple-card.c:165:7: warning: 'node' may be used uninitialized in this function [-Wmaybe-uninitialized]
This restores the previous behavior by using the node from
of_parse_phandle_with_args() that was previously being
returned from of_parse_phandle().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_path_get may return -ENOMEM when allocating memory for list
fails. We should not keep processing path or start up dpcm dai in
this case.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The field is initialized in the probe callback, but never used again. So it
can be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
idle_bias_off is false by default, no need to set it explicitly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
In a couple of places the driver is missing a check to ensure there is a
secondary DAI before it de-references the pointer to it, causing a null
pointer de-reference. This patch adds a check to avoid this.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
This patch will split the DT node into old style and new style:
The new style will merge the single DAI link and muti DAI links code
together, the new style will be easier to add muti DAI links from old
single DAI link DTs.
This patch will maintian compatibility with the old DTs.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
I moved from ST Microelectronics and so updating email-id to personal one.
Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
as pr_* macros are more preffered over printk, so printk replaced
with corresponding pr_* macros.
this patch will generate warning from checkpatch as it only did printk
replacement and didnot fixed other style issues.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add quirks for XMOS based DACs for native DSD playback support using the new
DSD_U32_LE sample format.
This version adds native DSD support for:
- iFi Audio micro iDSD/nano iDSD (they use the same prod. id)
- DIYINHK USB to I2S/DSD converter
Changes from v2:
- fix and simplify switch statement
Changes from v1:
- use specific product id and alt setting per XMOS based device
[fixed a misc coding style issue by tiwai]
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
XMOS based USB DACs with native DSD support expose this feature via a USB
alternate setting. The audio format is either 32-bit raw or a 32-bit PCM format.
To utilize this feature on linux this patch introduces a new 32-bit DSD
sampleformat DSD_U32_LE.
A follow up patch will add a quirk for XMOS based devices to utilize the new format.
Further patches will add support to alsa-lib.
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Detect and handle the H6 daughterboard; it works the same as with the
ST, except that there is no conflict with the CS2000 chip.
Tested-by: Andreas Allacher <andreas.allacher@gmx.at>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add one more option to the "Headphones Impedance" control to synchronize
with recent versions of the Windows driver.
Tested-by: fugazzi® <fugazzi99@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Changing an interval boundary to a multiple of the step size makes that
boundary exact.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The min parameter was not used by any caller. And if it were used,
underflows in the calculations could lead to incorrect results.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are no users left and new users should rather use the component_driver
struct embedded in the snd_soc_platform_driver struct to do this. E.g.:
static const struct snd_soc_platform_driver foobar_driver = {
.component_driver = {
.dapm_widgets = ...,
.num_dapm_widgets = ...,
...,
},
...
};
instead of
static const struct snd_soc_platform_driver foobar_driver = {
.dapm_widgets = ...,
.num_dapm_widgets = ...,
...
};
This also allows us to remove the steal_sibling_dai_widgets hack.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The sst-haswell-pcm driver registers both a snd_soc_component and a
snd_soc_platform and expects that the DAPM widgets for the DAIs registered by
component are added to the DAPM context of the platform. This requires us to
have a hack in the ASoC core which does so. Moving the DAPM elements over to
the component allows us to remove this hack.
While we are at it also move the controls over to the component. The controls
don't need the platform for anything other than snd_soc_platform_get_drvdata(),
this can easily be replaced by snd_soc_component_get_drvdata(). As the long
term goal is to register only a single component this is a step in the right
direction.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Resource allocations should happen in driver probe callback rather than in
snd_soc_platform probe functions. Especially if the resource is device
managed. The snd_soc_* probe/remove functions are mainly intended to be used
for things that require the component to be already bound to a card.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
I moved from ST Microelectronics and the email-id no longer
exists. Update email-id to personal one,
Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner. While we are at it also remove the
regcache_cache_only() calls from suspend/resume as there shouldn't be any IO
between suspend and resume.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_OFF at the end of CODEC probe()
can also be removed as the CODEC is already in OFF state at this point.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner. While we are at it also remove the
regcache_cache_only() calls from suspend/resume as there shouldn't be any IO
between suspend and resume.
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF
when removing the CODEC, no need to do it manually anymore.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
We do a bit more than just running the callbacks during suspend and resume
these days (e.g. call regcache_mark_dirty() during suspend). But this is
only when suspend and resume callbacks are specified for the driver,
otherwise nothing is done. This means that drivers which don't want to do
anything special during suspend and resume, but still want the standard
operations to run, need to provide empty suspend and resume callback
functions (rather than no callbacks). This patch updates the suspend and
resume code to always run standard sequence regardless of whether suspend
and resume handlers are provided.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a substantial amount of drivers that in go to SND_SOC_BIAS_OFF on
suspend and go back to SND_SOC_BIAS_SUSPEND on resume (Often this is even
the only thing done in the suspend and resume handlers). This patch
introduces a new suspend_bias_off flag, which when set by a driver will let
the ASoC core automatically put the device's DAPM context at the
SND_SOC_BIAS_OFF level during suspend. Once the device is resumed the DAPM
context will go back to SND_SOC_BIAS_STANDBY (if the context is idle,
otherwise to SND_SOC_BIAS_ON).
This will allow us to remove a fair bit of duplicated code from the drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently when a ASoC sound card is unregistered we leave the individual
components in their current state, just call the remove() callback and leave
it to the drivers to do the proper shutdown/cleanup.
This patch introduces a call to snd_soc_dapm_shutdown() when removing the
card. This will make sure that all DAPM widgets are properly powered down
and all DAPM contexts are put at the SND_SOC_BIAS_OFF level. This will
ensure that all components are properly powered down when the card is
removed.
Since a lot of drivers manually go to SND_SOC_BIAS_OFF in their remove
callback this will also allow us to remove a bit of duplicated code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Set card->instantiated to false when the card is removed to make sure that
operations that expect the card to be fully instantiated do not run anymore
during card removal.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of capture we should not use rotation. The reverse and mask is
enough to get the data align correctly from the bus to MCU:
Format data from bus after reverse (XRBUF)
S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB|
S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB|
S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB|
With this patch all supported formats will work for playback and capture.
Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture)
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
S24_LE is the same on the bus as S24_3LE, which means the codec can support
it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC core will only call the suspend/resume callbacks when the device's
DAPM context is idle. Since this driver sets idle_bias_off to true this
means that the device is already in SND_SOC_BIAS_OFF when the suspend
callback is called, so there is no need to manually set this state again.
There is also no need to go to SND_SOC_BIAS_STANDBY in the resume callback
since the core will go right back to SND_SOC_BIAS_OFF.
Also drop the regcache_cache_only() calls from the suspend and resume
handlers. There shouldn't be any IO happening after suspend and before
resume.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
A few more driver specific fixes on top of the currently pending fixes
(which are already in your tree but not Linus').
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gYI8
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.17
A few more driver specific fixes on top of the currently pending fixes
(which are already in your tree but not Linus').
The DACs on Sigmatel/IDT codecs do mute at the lowest volume level,
and in the earlier drivers, we passed TLV_DB_SCALE_MUTE bit for each
volume control element like Speaker and Headphone as well as Master.
Along with the translation to the generic parser, however, the TLV bit
was lost for the slave controls (e.g. Speaker) but set only to
Master. In theory this should have sufficed, but apps, particularly
PA, do care the slave volume bits, so we seem to see a regression in
the volume controls.
This patch adds a flag to hda_gen_spec to specify the DAC mute
feature, and adds the TLV bit properly for all relevant volume
controls. Also, the TLV bit for vmaster is set in hda_generic.c, so
that we can get rid of all tricks from the codec driver side.
As the similar hack is applied to Conexant 5051 stuff, we can get rid
of it as well.
BugLink: https://bugs.launchpad.net/bugs/1357928
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All MAX98090 input clocks MCLK, LRCLK and BCLK must be running and stable
before powering on the codec in slave mode. Otherwise the PLL may not lock
to LRCLK causing silence in playback and capture. How often that happens is
somewhat hardware and clock configuration specific.
Now if wanting to follow strictly this clocks must be active before
powering the codec on requirement we should have a notification from DAI
driver to codec driver when clocks are activated and take codec out of
shutdown only after that. Plus take care of possible active bypass paths.
However, when PLL unlock occurs, MAX98090 asserts the PLL Unlock Flag which
can be configured as an IRQ source. This allows to workaround around the
issue by toggling the codec power shortly in case of PLL lock failure.
In order to prevent needlessly toggling codec power in case of short PLL
unlocks at the beginning of stream this patch implements delayed activation
for PLL unlock interrupt. Then workaround is run only when the PLL doesn't
lock at all.
Power toggling workaround for PLL unlock comes originally from
Liam Girdwood <liam.r.girdwood@linux.intel.com> and delayed activation from
me.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This simplifies aic31xx_divs table. There is no more need for p_val or
separate lines for 12 and 24 MHz mclks.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I2S format requires bitclock to have an exact amount of cycles in a
frame for audio to work cleanly. With dsp formats that is not so
important.
Updates aic31xx_setup_pll() to look for a line in aic31xx_divs table
that produces the best match for the bitclock and adds lines to
aic31xx_divs for 12MHz mclk and 24bit samples.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
f687d900d3
(ASoC: simple-card: cpu_dai_name creates confusion when DT case)
cleared cpu_dai_name for caring fmt_single_name case,
and
179949bc04
(ASoC: simple-card: remove dai_link->cpu_dai_name when DT)
cared multi dai-link case.
but, cpu_dai_name matching is required when fmt_multiple_name was used
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous commit for the non-atomic PCM ops added more codes to
snd_pcm_stream_lock() and its variants. Since they are inlined
functions, it resulted in a significant code size bloat. For reducing
the size bloat, this patch changes the inline functions to the normal
function calls. The export of rwlock and rwsem are removed as well,
since they are referred only in pcm_native.c now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, many PCM operations are performed in a critical section
protected by spinlock, typically the trigger and pointer callbacks are
assumed to be atomic. This is basically because some trigger action
(e.g. PCM stop after drain or xrun) is done in the interrupt handler.
If a driver runs in a threaded irq, however, this doesn't have to be
atomic. And many devices want to handle trigger in a non-atomic
context due to lengthy communications.
This patch tries all PCM calls operational in non-atomic context.
What it does is very simple: replaces the substream spinlock with the
corresponding substream mutex when pcm->nonatomic flag is set. The
driver that wants to use the non-atomic PCM ops just needs to set the
flag and keep the rest as is. (Of course, it must not handle any PCM
ops in irq context.)
Note that the code doesn't check whether it's atomic-safe or not, but
trust in 100% that the driver sets pcm->nonatomic correctly.
One possible problem is the case where linked PCM substreams have
inconsistent nonatomic states. For avoiding this, snd_pcm_link()
returns an error if one tries to link an inconsistent PCM substream.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
...by factoring out common parts to the just added pin macros.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This will be used in a later patch to make the pin quirk table shorter.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC1150 codec seems to need the COEF- and PLL-setups just like its
compatible ALC882 codec. Some machines (e.g. SunMicro X10SAT) show
the problem like too low output volumes unless the COEF setup is
applied.
Reported-and-tested-by: Dana Goyette <danagoyette@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit ff795d614b ("ASoC: ab8500: Convert register I/O to regmap")
initially converted the ab8500 CODEC driver to use regmap rather than
legacy ASoC IO. This was reverted though in commit 63e6d43bf8 ("ASoC:
ab8500: Revert to using custom I/O functions") since the inital conversion
was not working properly. This was presumebly because the SOC_SINGLE_XR_SX
controls, which are used by this driver, did not properly support regmap at
that point. This has since been fixed in commit 6137a5ca32 ("ASoC: Prepare
SOC_SINGLE_XR_SX controls for regmap"). So revert back to regmap again.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI links's cpu_of_node's and codec_of_node's refcounts shouldn't
be decremented immediately at the end of the probe() fucntion.
Because we will still use them before the audio card is removed.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'big-endian-data' property is originally used to indicate whether the
LSB firstly or MSB firstly will be transmitted to the CODEC or received
from the CODEC, and there has nothing relation to the memory data.
Generally, if the audio data in big endian format, which will be using the
bytes reversion, Here this can only be used to bits reversion.
So using the 'lsb-first' instead of 'big-endian-data' can make the code
to be readable easier and more easy to understand what this property is
used to do.
This property used for configuring whether the LSB or the MSB is transmitted
first for the fifo data.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acer Aspire 3830TG with CX20588 codec has a digital built-in mic that
has the same problem like many others, the inverted signal in stereo.
Apply the same fixup to this machine, too.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename iface_reg3 to iface_reg2 since this variable is actually used for
interface register 2.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
6a91a17bd7
(ASoC: simple-card: Handle many DAI links)
added multi DAI support on simple-card.
This means priv->dai_link might be pointer of multi DAI.
dai_link->init is needed for all DAI.
This patch cares it for all DAIs on DT/non-DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
f687d900d3
(ASoC: simple-card: cpu_dai_name creates confusion when DT case)
removed dai_link->cpu_dai_name when DT case,
since it uses DT phand in soc_bind_dai_link().
This binding will fail if it has cpu_dai_name.
6a91a17bd7
(ASoC: simple-card: Handle many DAI links)
added multi DAI link support to simple-card driver.
Then, removing cpu_dai_name was cared only single DAI.
But, it is needed in all DT cases.
This patch moves it to asoc_simple_card_dai_link_of()
so that care about all DAIs.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card driver is using asoc_simple_xxx() prefix.
simple_card_dai_link_of() should be
asoc_simple_card_dai_link_of().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform_name should be omap-mcasp3 for the 2nd link which is used for
voice connection.
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie+linaro@kernel.org>
Cc: stable@vger.kernel.org
In IEC 61883-6, one data block transfers one event. In ALSA, the event equals one PCM frame,
hence one data block transfers one PCM frame. But Dice has a quirk at higher sampling rate
(176.4/192.0 kHz) that one data block transfers two PCM frames.
Commit 10550bea44 ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete
CIP_HI_DUALWIRE") moved some codes related to this quirk into Dice driver. But the commit
forgot to add arrangements for PCM period interrupts and DMA pointer updates. As a result, Dice
driver cannot work correctly at higher sampling rate.
This commit adds 'double_pcm_frames' parameter to amdtp structure for this quirk. When this
parameter is set, PCM period interrupts and DMA pointer updates occur at double speed than in
IEC 61883-6.
Reported-by: Daniel Robbins <drobbins@funtoo.org>
Fixes: 10550bea44 ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # 3.16
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The channel mapping is initialized by amdtp_stream_set_parameters(), however
Dice driver set it before calling this function. Furthermore, the setting is
wrong because the index is the value of array, and vice versa.
This commit moves codes for channel mapping after the function and set it correctly.
Reported-by: Daniel Robbins <drobbins@funtoo.org>
Fixes: 10550bea44 ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # 3.16
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use single snd_soc_update_bits() call to update the register bits.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Brian Austin <brian.austin@cirrus.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The regulator_bulk_free() call is not required because current code is using
devm_regulator_bulk_get().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The regulator_bulk_free() call is not required because current code is using
devm_regulator_bulk_get().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are no real users for cache_only in "struct snd_soc_codec" so remove
it and needless debugfs node.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Return true or false instead of 1 and 0
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Reported-by: Zoltán Szenczi <zoltan@raspberrypi.org>
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Reported-by: Zoltán Szenczi <zoltan@raspberrypi.org>
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Reported-by: Zoltán Szenczi <zoltan@raspberrypi.org>
Signed-off-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Here contains not many exciting changes but just a few minor ones:
An off-by-one proc write fix, a couple of trivial incldue guard
fixes, Acer laptop pinconfig fix, and a fix for DSD formats that
are still rarely used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=raXL
-----END PGP SIGNATURE-----
Merge tag 'sound-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here contains not many exciting changes but just a few minor ones: An
off-by-one proc write fix, a couple of trivial incldue guard fixes,
Acer laptop pinconfig fix, and a fix for DSD formats that are still
rarely used"
* tag 'sound-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Set up initial pins for Acer Aspire V5
ALSA: pcm: Fix the silence data for DSD formats
ALSA: ctxfi: ct20k1reg: Fix typo in include guard
ALSA: hda: ca0132_regs.h: Fix typo in include guard
ALSA: core: fix buffer overflow in snd_info_get_line()
When using a DT-based multi-platform kernel, there's not always Kconfig
logic that selects the right codec driver.
Allow the user to manually select WM8978.
This is needed for Armadillo 800 EVA using a generic r8a7740 multi-platform
kernel.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
Also pass sst device as an argument to function pointer prototypes of
compr_ops. This will be used to derive sst driver context.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are two pins can be used for rt5677's DMIC2 clock. This patch
add the select options for it.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
We name MICBIAS1 in dapm widget, but micbias1 in route table.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Debugging showed Realtek RT5642 doesn't support autoincrementing writes so
driver should set the use_single_rw flag for regmap.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Acer Aspire V5 doesn't set up the pins correctly at the cold boot
while the pins are corrected after the warm reboot. This patch gives
the proper pin configs statically in the driver as a workaround.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81561
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds to the readability of the ice1712 driver.
Signed-off-by: Konstantinos Tsimpoukas <kostaslinuxxx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
as broken user-visible strings breaks the ability to grep for them , so this patch fixes the broken user-visible strings
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
as pr_* macros are more preffered over printk, so printk replaced with corresponding pr_err and pr_alert
this patch will generate a warning from checkpatch for an unnecessary space before new line and has not been fixed as this patch is only for printk replacement.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This was accidentally lost in commit f1d45cc3ae ("ASoC: Consolidate
platform and CODEC probe/remove").
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
This driver doesn't use any ASoC level IO nor does it register any controls
or DAPM elements that require it. This means it can safely be removed.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Right now we set 0 as the silence data for DSD_U8 and DSD_U16 formats,
but this is actually wrong. 0 is rather the most negative value.
Alternatively, we may take the repeating 0x69 pattern like ffmpeg
deploys.
Reference: https://ffmpeg.org/pipermail/ffmpeg-cvslog/2014-April/076427.html
Suggested-by: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_info_get_line() documents that its last parameter must be one
less than the buffer size, but this API design guarantees that
(literally) every caller gets it wrong.
Just change this parameter to have its obvious meaning.
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: <stable@vger.kernel.org> # v2.2.26+
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A bunch of ASoC fixes with a few HD-audio fixes in this pull request.
All fairly small, boring and device-specific fixes, in addition to
MAINTAINERS update for better reviewing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=x5gm
-----END PGP SIGNATURE-----
Merge tag 'sound-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of ASoC fixes with a few HD-audio fixes in this pull request.
All fairly small, boring and device-specific fixes, in addition to
MAINTAINERS update for better reviewing"
* tag 'sound-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi - apply Valleyview fix-ups to Cherryview display codec
ALSA: hda/hdmi - set depop_delay for haswell plus
ALSA: hda - restore the gpio led after resume
ALSA: hda/realtek - Avoid setting wrong COEF on ALC269 & co
ASoC: pxa-ssp: drop SNDRV_PCM_FMTBIT_S24_LE
ASoC: fsl-esai: Revert .xlate_tdm_slot_mask() support
ASoC: mcasp: Fix implicit BLCK divider setting
ASoC: arizona: Fix TDM slot length handling in arizona_hw_params
ASoC: pcm512x: Correct Digital Playback control names
ASoC: dapm: Fix uninitialized variable in snd_soc_dapm_get_enum_double()
ASoC: Intel: Restore Baytrail ADSP streams only when ADSP was in reset
ASoC: Intel: Wait Baytrail ADSP boot at resume_early stage
ASoC: Intel: Merge Baytrail ADSP suspend_noirq into suspend_late
MAINTAINERS: Add i.MX maintainers and paths to Freescale ASoC entry
ASoC: Intel: Update Baytrail ADSP firmware name
Use the proper wrapper functions instead of directly calling the DMAengine
callback functions.
Also add the missing include to linux/dmaengine.h.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Use the proper wrapper functions instead of directly calling the DMAengine
callback functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Build kernel with SND_SOC_FSL_ASOC_CARD=m && SND_SOC_FSL_{SSI,SAI,ESAI}=y
leads the following error:
sound/built-in.o: In function `fsl_sai_probe':
>> fsl_sai.c:(.text+0x5f662): undefined reference to `imx_pcm_dma_init'
sound/built-in.o: In function `fsl_esai_probe':
>> fsl_esai.c:(.text+0x6044b): undefined reference to `imx_pcm_dma_init'
The config SND_SOC_FSL_ASOC_CARD is for IMX SOC, So move it under condition
of 'if SND_IMX_SOC'.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
With componentization we no longer necessarily need a snd_soc_codec struct for a
card. Instead of checking if the card's CODEC list is empty just use
card->instantiated to check if the card has been instantiated yet.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
There were never any actual users of this in upstream and by we have with
regmap a replacement in place, which should be used by new drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
So far regmap is only automatically initialized for CODECs. Now that we have the
infrastructure in place to let components have DAPM widgets and controls that
want to use the generic regmap based IO also make sure to automatically
initialize regmap for all components.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The lookup of CPU and CODEC DAIs is fairly similar and can easily be
consolidated into a single helper function.
There are two main differences in the current implementation of the CPU and
CODEC DAI lookup:
1) CPU DAIs can be looked up by the DAI name alone and do not necessarily
require a component name/of_node.
2) The CODEC DAI search only considers DAIs from CODEC components.
For 1) the new helper function will allow to lookup DAIs without providing a
component name or of_node, but since snd_soc_register_card() already rejects
CODEC DAI link components without neither a of_node or a name we'll never get
into the situation where we try to lookup a CODEC DAI without a name/of_node.
For 2) the new helper function just always considers all components.
Componentization is now at a point where it is possible to register a CODEC as a
snd_soc_component rather than a snd_soc_codec, by considering DAIs from all
components it is possible to use such a CODEC in a DAI link.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
CPU and CODEC DAI works exactly the same way. There is already a helper function
for CODEC DAI removal, use that one as well for CPU DAI removal.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Currently when a DAI has no CODEC associated to it the reference on the module
containing the DAI driver is increased when the DAI is probed and decrease when
the DAI is removed. For DAIs with CODECs the module reference count was already
incremented when the CODEC is probed. Now that all components have their module
reference count incremented when they are probed and all DAIs do have a
component it is possible to remove the module reference counting on DAI probe
and removal.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Having the check in a centralized place makes the code a bit cleaner and
shorter.
Note: There is a slight semantic change in this patch. soc_probe_aux_dev() will
no longer return -EBUSY if the AUX dev has already been probed before. This is
fine though since it will simply do nothing in that case and return success.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Given that the component is the containing structure it makes more sense to pass
the component rather than the DAPM context to the AUX dev init callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch makes it possible to register arbitrary components as a AUX dev
for a card. This was previously only possible for CODEC components. With
componentization having made it possible for components to have DAPM contexts
and controls there is no reason why AUX devs should be artificially limited to
snd_soc_codec devices.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Now that we have a unified probe and remove path make sure to call them for all
components. soc_{probe,remove}_component are responsible for setting up the DAPM
context for the component, initialize the component prefix, manage the debugfs
entries as well as do the registration of table based controls and DAPM
elements. They also call the component drivers probe and remove callbacks. This
patch makes these things available for generic snd_soc_component drivers rather
than only having them for snd_soc_codec and snd_soc_platform drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
There are some place in the ASoC core that expect rtd->codec to be non NULL
(mainly CODEC specific sysfs files). With componentization going forward
rtd->codec might be NULL in some cases. This patch prepares the core for this by
not registering CODEC specific sysfs files if rtd->codec is NULL. sysfs file
removal does not need to be conditionalized as it handles the removal of
non-existing files just fine.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The platform and CODEC probe and remove code is now largely identical. This
patch consolidates it at the component level.
The resulting code is slightly larger due to all the boiler plate code setting
up the indirection for the table based control and DAPM registration. Once all
drivers have been update to no longer use the snd_soc_codec_driver and
snd_soc_platform_driver specific fields for this the indirection can be removed
again.
This patch contains two noteworthy hacks that are only meant to be temporary to
be able to update drivers and the core in separate incremental patches.
The first hack is related to that some DPCM platforms expect that the DAPM
widgets for the DAIs of a snd_soc_component are created in the DAPM context of
the snd_soc_platform that has the same parent device. For handling this the
steal_sibling_dai_widgets attribute is introduced. It gets set for
snd_soc_platforms that register DAPM elements. When creating the DAI widgets for
a component this flag is checked and if it is found on one of the siblings the
component will not create any DAI widgets in its own DAPM context. If the
attribute is set on a platform it will look for siblings components and create
DAI widgets for them in its own context. The fix for this will be to update
the offending drivers to only register a single component rather than two.
The second hack deals with the fact that the ASoC card suspend and resume code
still needs a list of CODECs that have been registered for the card. To handle
this the generic probe and remove path have a check to see if the component is
CODEC and if yes add/remove it to the card's CODEC list. While it is possible to
clean up the suspend/resume code to not need the CODEC list anymore this is a
bit of a chicken and egg problem since it will become easier to clean up the
suspend/resume code once there is a unified component layer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The debugfs registration is mostly identical between platforms and CODECs. This
patches consolidates the two implementations at the component level.
Unfortunately there are still a couple of CODEC specific debugfs files that are
related to legacy ASoC IO that need to be registered. For this a new callback is
added to the component struct that will be initialized when a CODEC is
registered and will be used to register the CODEC specific files. Once there are
no drivers left using legacy IO this can be removed again.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The imx-es8328 driver fails to build on PPC because it explicitly depends on
SND_SOC_IMX_PCM_FIQ, which itself doesn't build on PPC. Instead, rely on
the SND_SOC_FSL_SSI config option to pull in the necessary libraries.
While we're at it, remove SND_SOC_FSL_UTILS, which also is not needed.
Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Valleyview and Cherryview have the same behavior on display audio. So this patch
defines is_valleyview_plus() to include codecs for both Valleyview and its successor
Cherryview, and apply Valleyview fix-ups to Cherryview.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both Haswell and Broadwell need set depop_delay to 0. So apply this
setting to haswell plus.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are many codes doing writes or updates COEF verbs sequentially
in a batch. Rewrite such open codes with tables for optimization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The helper functions snd_hda_check_board_config() and
snd_hda_check_board_codec_sid_config() are no longer used since the
transition to the generic parser and all quirks have been replaced
with fixups. Let's kill these dead codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some HP laptops, the mute led is controlled by codec gpio.
When some machine resume from s3/s4, the codec gpio data will be
cleared to 0 by BIOS:
Before suspend:
IO[3]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
After resume:
IO[3]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
To skip the AFG node to enter D3 can't fix this problem.
A workaround is to restore the gpio data when the system resume
back from s3/s4. It is safe even on the machines without this
problem.
BugLink: https://bugs.launchpad.net/bugs/1358116
Tested-by: Franz Hsieh <franz.hsieh@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/soc/generic/simple-card.c: In function simple_card_dai_link_of:
sound/soc/generic/simple-card.c:198:10: warning: passing argument 3 of
asoc_simple_card_sub_parse_of from incompatible pointer type [enabled by default]
&dai_link->cpu_dai_name);
^
sound/soc/generic/simple-card.c:112:1: note: expected const struct device_node **
but argument is of type struct device_node **
asoc_simple_card_sub_parse_of(struct device_node *np,
^
sound/soc/generic/simple-card.c:229:10: warning: passing argument 3 of
asoc_simple_card_sub_parse_of from incompatible pointer type [enabled by default]
&dai_link->codec_dai_name);
^
sound/soc/generic/simple-card.c:112:1: note: expected const struct device_node **
but argument is of type struct device_node **
asoc_simple_card_sub_parse_of(struct device_node *np,
^
Since the asoc_simple_card_sub_parse_of() is used in simple-card module only,
and the third argument is just used to get the node ponters address, so there is
no need it must to be 'const' type.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Building kernel with SND_SOC_IMX_AUDMUX=n leads to the following error:
sound/built-in.o: In function `fsl_asoc_card_probe':
>> fsl-asoc-card.c:(.text+0x1467b5): undefined reference to `imx_audmux_v2_configure_port'
>> fsl-asoc-card.c:(.text+0x1467d0): undefined reference to `imx_audmux_v2_configure_port'
>> fsl-asoc-card.c:(.text+0x1467ed): undefined reference to `imx_audmux_v2_configure_port'
>> fsl-asoc-card.c:(.text+0x146807): undefined reference to `imx_audmux_v2_configure_port'
Update Kconfig to select SND_SOC_IMX_AUDMUX when SND_SOC_FSL_ASOC_CARD=y.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
The AB8500_GPIO_DIR4_REG register define has the bank for the register in the
upper 8 bits and the register itself in the lower 8 bits. When passing it to
abx500_{set,get}_register_interruptible() the upper bits get truncated which
generates the following warning from sparse:
sound/soc/codecs/ab8500-codec.c:1972:53: warning: cast truncates bits
from constant value (1013 becomes 13)
sound/soc/codecs/ab8500-codec.c:1980:53: warning: cast truncates bits
from constant value (1013 becomes 13)
The bank is passed separately to abx500_{set,get}_register_interruptible() so
the code works fine as it is. Given that all users of AB8500_GPIO_DIR4_REG
always truncate the upper 8 bits just remove them from the define.
Also remove the unnecessary casts to u8.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
It is not always possible to interchange iomem pointers with normal pointers,
which why we have annotations for iomem pointers and warn when casting them to a
normal pointer or vice versa. In this case the casting is fine and unfortunately
necessary so add the proper annotations to tell code checkers that it is
intentional. This silences the following warnings from sparse:
sound/soc/samsung/idma.c:354:20: warning: incorrect type in argument 1
(different address spaces) expected void volatile [noderef]
<asn:2>*addr got unsigned char *area
sound/soc/samsung/idma.c:372:22: warning: cast removes address space of
expression
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
dmaengine_prep_slave_single() expects a enum dma_transfer_direction and not a
enum dma_data_direction. Since the integer representations of both DMA_TO_DEVICE
and DMA_MEM_TO_DEV aswell as DMA_FROM_DEVICE and DMA_DEV_TO_MEM have the same
value the code worked fine even though it was using the wrong type.
Fixes the following warnings from sparse:
sound/soc/sh/fsi.c:1307:42: warning: mixing different enum types
sound/soc/sh/fsi.c:1307:42: int enum dma_data_direction versus
sound/soc/sh/fsi.c:1307:42: int enum dma_transfer_direction
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Sparse spits out the following warning:
sound/soc/sh/rcar/gen.c:250:21: warning: dubious: x & !y
It does this because sometimes mixing boolean and bit-wise logic has not the
intended result. In this case we are fine, but replacing the bit-wise '&' with
the boolean '&&' silences the sparse warning. The generated code for both cases
is the same.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
odroidx2_drvdata and odroidu3_drvdata are not used outside this module so make
them static (and also const while we are at it).
Fixes the following warnings from sparse:
sound/soc/samsung/odroidx2_max98090.c:69:26: warning: symbol
'odroidx2_drvdata' was not declared. Should it be static?
sound/soc/samsung/odroidx2_max98090.c:74:26: warning: symbol
'odroidu3_drvdata' was not declared. Should it be static?
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
edma_pcm_platform_register() is declared in edma-pcm.h and defined in
edma-pcm.c. To make sure that the function signature matches for both
edma-pcm.c should include edma-pcm.h
Fixes the following sparse warning:
sound/soc/davinci/edma-pcm.c:48:5: warning: symbol
'edma_pcm_platform_register' was not declared. Should it be static?
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
init_name is basically a hack and should only be used for statically allocated
device structs. For dynamically allocated devices dev_set_name() should be used.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
There is one design rule according to SAI's reference manual:
If the transmitter bit clock and frame sync are to be used by both transmitter
and receiver, the transmitter must be configured for asynchronous operation
and the receiver for synchronous operation.
And SYNC of TCR2 is a 2-width control bit:
00 Asynchronous mode.
01 Synchronous with receiver.
10 Synchronous with another SAI transmitter.
11 Synchronous with another SAI receiver.
So the driver should have set SYNC bit of TCR2 to 0x0, and meanwhile set SYNC
bit of RCR2 to 0x1 (Synchronous with transmitter).
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Axel Lin
Rasmus Villemoes
Subhransu S. Prusty
Fabian Frederick
Vinod Koul
Oder Chiou
Takashi Iwai
Mark Brown
Jianqun
Kuninori Morimoto
Paul Handrigan
Andy Shevchenko
Qiao Zhou
Arnd Bergmann
Xiubo Li
Lars-Peter Clausen
Mark Brown
Charles Keepax
Rajeev Kumar
Sudip Mukherjee
Jurgen Kramer
Clemens Ladisch
Peter Ujfalusi
Jarkko Nikula
Jyri Sarha
David Henningsson
Hui Wang
Wei Yongjun
Takashi Sakamoto
Brian Austin
Linus Torvalds
Geert Uytterhoeven
Bard Liao
Konstantinos Tsimpoukas
Shengjiu Wang
Sean Cross
Libin Yang
Nicolin Chen