Rename process_txrx_fifo to mxser_process_txrx_fifo and:
* remove useless parentheses
* return from the 'if's true branch and process the rest in normal code
flow (shift the code one level left)
All this to make the code more readable.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-50-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that mxser_cards array (of struct mxser_cardinfo) contains only port
count and a quirk, we can encode these two directly into
pci_device_id::driver_data. And we can remove this struct completely.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-49-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a dev_info in ->probe which prints device's name, bus and slot
numbers. All these can be fetched from the lspci output. So remove this
useless print.
This eliminates the whole mxser_cardinfo::name field.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-48-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move request_irq from mxser_initbrd to mxser_probe so that we can switch
it to managed request. It simplifies the cleanup code.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-47-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch to managed resources for PCI using pcim_enable_device.
Regions and device disabling is now taken care of by the core and we
need not unwind. Neither in ->probe, nor in ->remove. That simplifies
the code.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-46-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only user of mxser_board_remove is mxser_remove. Move there those
few lines.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-45-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
What's done in ->probe for board is actually its initialization. So move
it to mxser_initbrd where it belongs.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-44-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the rest of MUST helpers. They all can use the newly added
mxser_must_set_EFR. And passing a bool instead of having two functions
(_enable+_disable) simplifies the code a lot too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-43-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Again, selecting a bank in the EFR register is duplicated many times.
Extract it to a separate function (mxser_must_select_bank) and use it on
all the places.
This cleans up most of the helpers. And mxser_get_must_hardware_id now
returns the HW ID directly, not via a by-reference parameter.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-42-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are multiple copies of setting the EFR register. Separate it to a
new universal function called __mxser_must_set_EFR. And use it in the
code by introducing mxser_must_set_enhance_mode instead of
mxser_disable_must_enchance_mode and mxser_enable_must_enchance_mode.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-41-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ModeMask local array is just inverted OP_MODE_MASK shifted by shiftbit.
Drop this array and use the value directly.
* return from the if's true branch and drop 'else' branch by moving the
code completely outside the if.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-40-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This ioctl code sets RS232, RS422 or RS485 mode. Move the code to a
separate function (mxser_ioctl_op_mode) with a note that these
mxser-special ioctls should be likely replaced eventually by TIOCGRS485
and TIOCSRS485.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-39-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's an once-set constant, so define a macro for the constant
(MXSER_CUSTOM_DIVISOR) and use it in the code instead.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-37-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's an once-set constant, so define a macro for the constant
(MXSER_BAUD_BASE) and use it in the code instead.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-36-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's been a long time since mxser_port::stop_rx was abandoned. Remove it.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-35-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the previous patches, mxser_port::normal_termios is unused, so
time to wave bye-bye.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-34-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MXSER_PORTS's tty_device is never registered and neither its
tty_port instance exists. Hence, it's quite pointless to allocate it.
It used to be used for global information fetches via ioctls. We have
just removed these as non-existent tty_device+tty_port was exactly the
reason to remove the ioctls.
It would be peculiar to add this "virtual" port as we require a backing
tty_port since commit ecbbfd44a0 (TTY: move tty buffers to tty_port)
in 2012.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-33-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the previous ioctls removal, cnt is needed only in
mxser_receive_chars_old now. So remove it from mxser_receive_chars and
mxser_receive_chars_new and account only in mxser_receive_chars_old.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-32-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) The semantics are defined exactly nowhere.
2) The ioctl definition was never exposed to userspace, so noone should
actually be reliably using this.
3) It's not even mentioned in any of the mxser utilities.
Provided the above, remove this mxser-special ioctl.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-31-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) The semantics are defined exactly nowhere.
2) The ioctl definition was never exposed to userspace, so noone should
actually be reliably using this.
3) It's not even mentioned in any of the mxser utilities.
Provided the above, remove this mxser-special ioctl.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-30-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) MOXA_GETMSTATUS is broken at least since commit ecbbfd44a0 (TTY:
move tty buffers to tty_port) in 2012.
Even though it's mentioned in the mon_pa moxa utility, obviously
noone ever tried that in that timeframe.
2) The ioctl definition was never exposed to userspace, so noone
should actually be reliably using this.
Provided the above, remove this mxser-special ioctl.
And remove the whole concept of mxser_ioctl_special as this was the last
ioctl in there.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-29-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) MOXA_GETDATACOUNT is broken at least since commit ecbbfd44a0 (TTY:
move tty buffers to tty_port) in 2012.
Even though it's mentioned in the mon_p moxa utility, obviously noone
ever tried that in that timeframe.
2) The ioctl definition was never exposed to userspace, so noone should
actually be reliably using this.
Provided the above, remove this mxser-special ioctl.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-28-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) MOXA_CHKPORTENABLE is broken at least since commit ecbbfd44a0 (TTY:
move tty buffers to tty_port) in 2012.
2) The ioctl definition was never exposed to userspace, so noone should
actually be reliably using this.
3) It's not even mentioned in any of the mxser utilities.
Provided the above, remove this mxser-special ioctl.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-27-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) The semantics are defined exactly nowhere.
2) The ioctl definition was never exposed to userspace, so noone should
actually be reliably using this.
3) It's not even mentioned in any of the mxser utilities.
Provided the above, remove this mxser-special ioctl.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-26-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) MOXA_ASPP_MON_EXT is broken at least since commit ecbbfd44a0 (TTY:
move tty buffers to tty_port) in 2012.
2) The ioctl definitions were never exposed to userspace, so noone should
actually be reliably using them.
3) They're not even mentioned in any of the mxser utilities.
So remove all these mxser-special ioctls: MOXA_ASPP_MON,
MOXA_ASPP_MON_EXT, and MOXA_SDS_RSTICOUNTER.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-25-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) The semantics are defined exactly nowhere.
2) The ioctl definition was never exposed to userspace, so noone should
actually be reliably using this.
3) It's not even mentioned in any of the mxser utilities.
Provided the above, remove this mxser-special ioctl.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-24-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* UART_MCR_AFE is a redefinition of serial_reg.h's one.
* UART_LSR_SPECIAL is a redefinition of serial_reg.h's
UART_LSR_BRK_ERROR_BITS.
So remove both and replace the latter uses by already defined
UART_LSR_BRK_ERROR_BITS.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-21-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the xmit ring buffer pointers and counter (xmit_head, xmit_tail,
xmit_cnt) unsigned. Now, the assumptions for the compiler are clear --
they cannot be negative.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-20-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In struct mxser_port, all the UART registers and masks, and the xon/xoff
character are stored into int. Let's re-type all these as UART registers
are 8bit (u8) and xon/xoff character is an unsigned char (cc_t in
ktermios).
This save some bytes in memory, but more importantly the change makes it
what it really is.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-19-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UART_LSR_SPECIAL is composed of UART_LSR_BI, UART_LSR_PE, UART_LSR_FE,
UART_LSR_OE. So status cannot be anything else. Remove the unused else
branch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-18-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extract the new handling of receive chars (using the MUST chip
enhancements) into a separate function. This eliminates the need for the
intr_old label and makes the code of mxser_receive_chars more compact.
In the next step, we will extract the old handling too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-16-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mxser_board::vector_mask is just a bitfield with bits set for all
available ports. We can obtain this value simply by
"BIT(brd->info->nports) - 1" directly in the ISR. So remove vector_mask
and simplify the code a bit.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-15-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ISR is terrible mix of letters. Let's extract the proper per-port
handling to a separate function called mxser_port_isr. This way, we can
actually see what both mxser_interrupt and mxser_port_isr do now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-14-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mxser_interrupt is a bit confusing as it passes a pointer to LSR
variable ("status") to mxser_receive_chars. That function can indeed
update the LCR variable. Make this clear by not passing a variable by
reference, instead, return updated status. And change its type
accordingly -- to u8.
Note that the next patches will rework ISR so that even the definition
of status will be u8 soon too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-13-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
request_irq was passed a board. There is no need to check dev_id and/or
find the appropriate board in the ISR. Neither check if board is NULL.
Remove this nonsense.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mxser_port::max_baud is actually a board property, not port's. So move
it to mxser_board.
While at it, drop the printk informing about max baud rate during probe.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-11-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
board::uart_type is always set to PORT_16550A. So, use this constant in
the code instead. And drop the mxser_board member.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-10-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provided the MUST HW ID is an enumeration, define one (enum
mxser_must_hwid) and use it in the code.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-9-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is named IsMoxaMustChipFlag in the original Moxa's driver. Over the
time, it was reduced to chip_flag which doesn't make much sense. So dub
it again by what it is: must_hwid (mxser_must_get_hwid assigns to it).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CheckIsMoxaMust actually finds out what the card is. So rename it to
mxser_must_get_hwid, so that the name conforms to the semantics of the
function.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Gpci_uart_info structure contains up to tripled information and
chose weird types for the members. Deduplicate the members and choose
proper types for the data -- everything can be u8 except baud rate.
There, we use speed_t, which is used in this context.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mxser.h serves only mxser.c, integrate the definitions into .c and
drop .h. There are some "semi-public" ioctl definitions, but they are
mostly go away in the next patches. If something, they would need to
live in an uapi header anyway.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason/desire to print module information upon module load.
Drop this printk (and a version define).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the ISA cards removal in the previous patch, the mxser_cards array
has holes in it. So renumber the array while updating PCI device's
driver_data.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While mxser PCI cards are still around and produced (Moxa provided me
with two recently), ISA cards are obsolete for a long time. I haven't
seen anyone using the cards and the ISA code paths are barely tested.
Hence, remove ISA support from mxser driver so that we can clean the
driver up.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby
Ondrej Zary