Граф коммитов

130 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 7fe0b14b72 spi: Updates for v3.7
No framework work here, only a bunch of driver updates of varying sizes:
 
 - Factoring out of the core hardware support from the MXS MMC driver by
   Marek Vasut to allow the hardware to also be used for SPI.
 - Lots of error handling cleanups from Guenter Roeck
 - Removal of the existing Tegra driver which is quite comprehensively
   broken as detailed in the changelog for the removal.
 - DT suppport for the PL022 and GPIO drivers.
 - pinctrl support for OMAP and PL022.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQarn8AAoJEOoSHmUN5Tg49U4QAKeAPTxlKBSwHuJUpvKsCFF7
 rfN9wsViOigcItsk065C1g20wViw6t8pSFkNmRzmbsIdSofqCYZlJapgWM5j2cXp
 BXs8z7za0JmK62ftS6C3IydacJPRDY/zd0fnSqXnhQOG7Z3YxDYJrM3Ugc97ZE6+
 dg9NUn6rw9ZSwHEwpl08H8tLYqNkd8A+wayPYKr0GSWX7EAqS8cJEWjS0DtvDAm1
 LxMx4BQHCorR6ydUZJrfhG6fLsubhIuMnXI4Ajhv/Ictl1qHH1Zx3mIAB+BNVV/B
 RlaQxPycr0eSikZ9UPMNST2o8vCRvamSfguPfBHMzRdRBp8M3TOKkNM2PmEGzCJW
 pgpDsMNAkEfktGqQfMTBJJMbAPLux1W5mPjfcjt7vOS+q6lkFPtecGdKbynnmLX6
 Vf6nImwp1vyNIvcCip0YZId+j/LrQimuDfMQOH99mwxbkNqMMA401bsxEt8ELmut
 Qt1XEFoS6Xxj8n2BhTS/lMgEzz8zOuH9uOJI0hpNtctOfue6vqPm76GaefVC1i/B
 jpMpUwexwsFc6IhekVFG0MAkolMhFmhlTwk9N24yfgArH8D1pa3emBFN762BQUHE
 Ba7pghcwZADm8rT5SFNoxblcyekT/hCSRSiQ55MHUpqdH77/eVA1Lah4PaHiOqxz
 b0mu9Ae98K077vGP3Z6r
 =ld23
 -----END PGP SIGNATURE-----

Merge tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc

Pull spi updates from Mark Brown:
 "No framework work here, only a bunch of driver updates of varying
  sizes:

   - Factoring out of the core hardware support from the MXS MMC driver
     by Marek Vasut to allow the hardware to also be used for SPI.
   - Lots of error handling cleanups from Guenter Roeck
   - Removal of the existing Tegra driver which is quite comprehensively
     broken as detailed in the changelog for the removal.
   - DT suppport for the PL022 and GPIO drivers.
   - pinctrl support for OMAP and PL022."

Pulling from Mark Brown as Grant Likely is still busy moving.

* tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits)
  spi: remove completely broken Tegra driver
  spi/imx: set the inactive state of the clock according to the clock polarity
  spi/pl022: get/put resources on suspend/resume
  spi/pl022: use more managed resources
  spi/pl022: Devicetree support w/o platform data
  spi/s3c64xx: Don't free controller_data on non-dt platforms
  spi: omap2-mcspi: add pinctrl support
  spi/pl022: adopt pinctrl support
  spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function
  spi/gpio: Fix stub for spi_gpio_probe_dt()
  spi/mxs: Make the SPI block clock speed configurable via DT
  spi: spi-sh-hspi: drop frees of devm_ alloc'd data
  spi/pl022: Fix chipselects pointer computation
  spi: spi-tle62x0: Use module_spi_driver macro
  mxs/spi: Rework the mxs_ssp_timeout to be more readable
  mxs/spi: Decrement the DMA/PIO border
  mxs/spi: Increment the transfer length only if transfer succeeded
  mxs/spi: Fix issues when doing long continuous transfer
  spi: spi-gpio: Add DT bindings
  spi: spi-gpio: store chipselect information in private structure
  ...
2012-10-02 17:26:42 -07:00
Linus Torvalds 84be4ae2c0 ARM: soc: soc-specific updates, take 2
This branch converts the MXS Freescale platform to use irqdomains and
 sparse IRQ, in preparation for DT probing and multiplatform kernels.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaiKwAAoJEIwa5zzehBx32FQP/0wZ5YZ4XMsCZRlXkzixc+/K
 uJa8+1vj4M861/4Q5/QXxbW/lOamxM5djvbG8/zLyl05RmQ5zV8UggDFIRSy9Yrr
 UlCwQK2co30HGlNK9NsbSiMadEaDVw9KitW4hssaqIPVDKR0KAOY0P4lDHDDFxUr
 /ES6Hl9GL5pGnAKrnxgU/amdHNTWkeW3YD30l00+v+EJd+65nXecN+iSZWleiZyC
 tV9cxwBgSZIwYAy7rJoNyOaZyEO8xPpewUGFgGFLUYEUggan9MKtMH7FQZstQ/YY
 hVSsqc05FYecdviuaoGJmmzWddihMBo2hNLUZTt5b+VDdw/mOGl0WV9aAiYOSlOY
 z/npwgWA8TP74MvtTuoy6BRQgNL7a2B4/h35ZeQ37bQG6AuQmcFvSxg4oiuyWQJL
 OL40FGANx7e2KK2gVEzpA7CVA69v/lh8CGD/xYdxsO+/o/F48j2cdPdtsQrCh3Gq
 MUV4e89avp1UVt5t5186snGmP990y/5rxOfbF+z7n1iU4zt2Dc2+k0H65UAiNpeG
 xHwJP20pRmroBRQiuwQABasSUNO6HL98/ZDQvFRdDj/xBQQt1/uGetDKLGk+i+tW
 T6HQIHT70iy7Xds0ANbd1K1uurUoYD33pB2KwgHjib9C0fy0ChEYs5NGemkUew22
 1iB6u0nTSrPnMXVg0M0e
 =wVa3
 -----END PGP SIGNATURE-----

Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates, take 2 from Olof Johansson:
 "This branch converts the MXS Freescale platform to use irqdomains and
  sparse IRQ, in preparation for DT probing and multiplatform kernels."

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mxs: remove mach/irqs.h
  ARM: mxs: select SPARSE_IRQ
  ARM: mxs: adopt irq_domain support for icoll driver
  ARM: mxs: select MULTI_IRQ_HANDLER
  ARM: mxs: retrieve timer irq from device tree
  gpio/mxs: adopt irq_domain support for mxs gpio driver
2012-10-01 18:35:58 -07:00
Linus Torvalds 2a2bf85f05 ARM: soc: device tree updates
Device tree conversion and enablement branch. Mostly a bunch of new
 bindings and setup for various platforms, but the Via/Winchip VT8500
 platform is also converted over from being 100% legacy to now use
 device tree for probing. More of that will come for 3.8.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaiKNAAoJEIwa5zzehBx329AP/1TwJk1dTHaAA7vDxyz2mq1E
 F0MBL9p32R1SczrFGjbmb9ouVW5tTjbK1zted5zBrGBXDIX9Kdz3Dmm7x6b2/JvZ
 8yMrdiBNpF3r8au6IaMuMlOq5yAaN+F4SxbC2rE0a9y3YmMZ6ug5dgoZ4O8orAC4
 il3eq1sb+rTTPCf7C5cGlKzdRQi2KYdAycpa7ChQCYSamxJjdM7cXR7pohVv9vhd
 9sF+h1I0ArxcVYn/mUOoCin8MyIWXlBQvbUnF+3aYO8CO9erhKH/owPngVBWGKZH
 +X6dk0ChUJfjzaWr2HPZIYUqLUnIoO8TsRhQVmLp1rPrSzSXMG3iDq0M4WEwL4Xo
 bMbAZ1KWYg53HRqbIOEQk5q9Mg7HUgtbJuOE7WLgBO5ubdKFFWLmDUJ+WVcoWzSW
 qyWaWpECSptlQjFyqZJd9MjizIDhuYjog2EWaSWXETQ+1XRmCSsqx8AX6n1MVdhP
 6jDLnYHYiJoOtGiaDpYxsXgMXdOVsrTegecNduqH/XhdEL1iwy3fwgK1DjoclYoj
 iFbn0/Tw3N5SvJlG4xitl12DQ7MeCCbfzJGRKenVh9/O4U+qrTbFRmsNaaZw5dA1
 bt+iEZ3aU8YBaKj02LexunAevpZJ2rfGNX2tBjQrIzzZK6CZibPWg42qfKJfdn7w
 etXVVApw5jQjAImY64kh
 =q7ZY
 -----END PGP SIGNATURE-----

Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc device tree updates from Olof Johansson:
 "Device tree conversion and enablement branch.  Mostly a bunch of new
  bindings and setup for various platforms, but the Via/Winchip VT8500
  platform is also converted over from being 100% legacy to now use
  device tree for probing.  More of that will come for 3.8."

Trivial conflicts due to removal of vt8500 files, and one documentation
file that was added with slightly different contents both here and in
the USb tree.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (212 commits)
  arm: vt8500: Fixup for missing gpio.h
  ARM: LPC32xx: LED fix in PHY3250 DTS file
  ARM: dt: mmp-dma: add binding file
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
  ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support
  ARM: tegra: Add Avionic Design Medcom-Wide support
  ARM: tegra: Add Avionic Design Plutux support
  ARM: tegra: Add Avionic Design Tamonten support
  ARM: tegra: dts: Add pwm label
  ARM: ux500: Fix SSP register address format
  ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
  ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
  ARM: ux500: Add all encompassing sound node to the HREF Device Tree
  ...
2012-10-01 18:28:06 -07:00
Linus Torvalds 11801e9de2 ARM: soc: soc-specific updates
Most notable here is probably the addition of basic support for the
 BCM2835, an SoC used in some of the Roku 2 players as well as the
 much-hyped Raspberry Pi, cleaned up and contributed by Stephen
 Warren. It's still early days on mainline support, with just the
 basics working. But it has to start somewhere!
 
 Beyond that there's some conversions of clock infrastructure on tegra
 to common clock, misc updates for several other platforms, and OMAP
 now has its own bus (under drivers/bus) to manage its devices through.
 
 This branch adds two new directories outside of arch/arm:
 drivers/irqchip for new irq controllers, and drivers/bus for the above
 OMAP bus. It's expected that some of the other platforms will migrate
 parts of their platforms to those directories over time as well.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO2SAAoJEIwa5zzehBx3TBIQAJYc+vpAqiv8MLQ1XV3cLiIP
 X57fxM9u1A+uXpXsiCTGR+ga8W4a5tlfGMXDBnl/K2bnFs2x11b9NkFLDJ7mdkih
 J4c/iOWT/mT5suLnnybyg6ZGaxGkAKou2AumiSmkazmq5hGG67hkpAOqFEfDK0J2
 Au7/6VN6GZXgiwt8nYaAB/qR5NVcww4m/6GQ2looaWgRLT/wgC3W2ZKvw6zEdl2J
 OxOpwf2ujG/75zLQaxTeZ5rKnGtAXH4v0KhY9CWQacQPi4L2MVCrvUrDB4j0as4H
 Wmsu7g6fZA9Vlf1aW/mlDY1ftozfbDaKORoYVS+CsWhm1oiQI5t+sAWRTkbbS85t
 pobgKfFdvNsl9kS1zRdEddK2tyotwtXh2jz+P/s1l95hfqZ8IdVBJNMlcrHRINOI
 2iQXFfGRhCCqMcfFiGXJ43tYja/aCsaIc4M5TrEma57czZT5jK8HSLh0ZUmFYDoe
 /TfUegVhFASmkNTk7dVZgZ2UoQVkv4lWs+xuf8YgX3UalWgl/YIRRFl4NnylGlEc
 jjrX3MjXATqXzLPEZaf8dRZHIpB6FYmZq1QqaoefcUQ46gBOueThElZP3sNWR8a2
 MOtknauLfLwQbrcH5CmqKpIpXTB4LKgbf/omH2jQlxBhQ5t7PXHVD1NFsbZbwM8J
 RVCZb4PwqEwOt/wibTrk
 =BCp4
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...
2012-10-01 18:24:44 -07:00
Linus Torvalds 2c0c86d5b6 The common clk framework changes for 3.7 are dominated by ARM platform
ports to the framework along with one MIPS port, one MFD port, one minor
 framework enhancement and one helper function for platforms expressing
 their clock data through device tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQadDCAAoJEDqPOy9afJhJCvcQAMVvkmom7aROkXfn6V3pxlUq
 dAtwpzvmikzdrE/4wMAus38o04Lygk6vEdXIJZyood1WTxBNbl+C9SJPg0ZmN8P+
 0I2Vx6u7ZoHggeG44s3ziDTVBC/+MolDlXlgJrqG7SHyLRGzHF4W6BDLvSUHzMcq
 zoFFAQPSx2TKfSkHHNj3PKdWX/vFOSZL5tkMU5QMNCC3kYyd9j+StaiIRAN0V7Nz
 kHy2tdkEA323E6fTwHlFOwBi/CjddIdVLZQr1DVIjwdmKfuf45hglZYULNbvPwOF
 AB8hyVFMozA44GKi+92u3NZ0TIrirctVDiK6k3UcD2tcgRNjrFHwQpe4ogg6/S58
 U+AXM62fsWhA6vykBgNadbeGhsIvfI8HJdRqjULxfqLkQsqNCAGjINJJbTC9Mev/
 zGfi3vjAUbbC0nAOmDloD93x8JI+P75IQC4GJD6FuHgoW7rDlKs+z9FXzJh/0W5T
 fQCnjLaPMnPv1VYWToGy0aCBGLpDhbTJNPqVA4SZBJQ5u2XXXLr8BjpavcG6ns5j
 zmXWVJo6Y+X7rU5+0RH3VGhnUylFEvQZyEa1O3rnNoNfy4Q9ymA/G27iZC5OPklw
 mSH4N+ndX6hT+KM+gDL9t6gyhkIhyhUSoQCRpWKAFqihYR2ckRPFUcK6OvqsA7JH
 vQMNdm2fW4zYSTsvT3mP
 =7v8L
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull clk framework update from Michael Turquette:
 "The common clk framework changes for 3.7 are dominated by ARM platform
  ports to the framework along with one MIPS port, one MFD port, one
  minor framework enhancement and one helper function for platforms
  expressing their clock data through device tree."

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: add of_clk_src_onecell_get() support
  clk: ux500: Define smp_twd clock for u8500
  mfd: dbx500: Provide a more accurate smp_twd clock
  clk: ux500: Support for prmcu_rate clock
  clk: Provide option for clk_get_rate to issue hw for new rate
  clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
  ARM: ux500: Switch to use common clock framework
  clk: ux500: Clock definitions for u8500
  clk: ux500: First version of clock definitions for ux500
  clk: ux500: Adapt PRCMU and PRCC clocks for common clk
  clk: versatile: make config option boolean
  clk: add Loongson1B clock support
  arm: mmp: make all SOCs use common clock by default
  clk: mmp: add clock definition for mmp2
  clk: mmp: add clock definition for pxa910
  clk: mmp: add clock definition for pxa168
  clk: mmp: add mmp specific clocks
  clk: convert ARM RealView to common clk
  clk: prima2: move from arch/arm/mach to drivers/clk
  ARM: PRIMA2: convert to common clk and finish full clk tree
2012-10-01 12:09:04 -07:00
Mark Brown f4b81dd83e Merge branches 'spi-drivers' and 'spi-mxs' into spi-next 2012-09-28 14:05:29 +01:00
Olof Johansson db404e72bb Update arch-vt8500 and drivers to device tree and
remove existing non-dt code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQXBatAAoJEAKiPfwuf9N/VZoIAI7PKNwakjM/KDiVzytwqZ+U
 h9kkjYW4ra8MH+jpjFQqvSyIJ3U+t016xqW3ZbqRuZBDgH0I7Gax7QoAZ/ljPlpG
 RAKl2l9WVPiBSwCESTpvR5lafBLklk6fL0Z267qIxDGld6YBiWHvTKIh1zDmeCWW
 hgDeWtcb1M61VlPrj9nPnCze66h2dUk+QSxaCodv7co5kzb0Q4S7U64BCs0hGe01
 kkdoUwnBjdeK0cUhDAJAP1vRyk04N16+H7yp4npmKhv/blKVc3MIRjg1iBV78ncd
 Kke/G1B9TJRpNTXdySYnsDQpaCWNSAryKXKkdxP0gh6MW8CMKYc1mdKYcEP3Tk8=
 =xG1+
 -----END PGP SIGNATURE-----

Merge tag 'vt8500-for-next' of git://git.code.sf.net/p/linuxwmt/code into next/dt

From Tony Prisk:

Update arch-vt8500 and drivers to device tree and
remove existing non-dt code.

* tag 'vt8500-for-next' of git://git.code.sf.net/p/linuxwmt/code:
  arm: vt8500: Update arch-vt8500 to devicetree support.
  arm: vt8500: gpio: Devicetree support for arch-vt8500
  arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
  arm: vt8500: clk: Add Common Clock Framework support
  video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
  serial: vt8500: Add devicetree support for vt8500-serial
  rtc: vt8500: Add devicetree support for vt8500-rtc
  arm: vt8500: Add device tree files for VIA/Wondermedia SoC's

Resolved add/change conflict in drivers/clk/Makefile.

Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-23 21:51:39 -07:00
Tony Prisk 85814d69e6 arm: vt8500: clk: Add Common Clock Framework support
This patch adds common clock framework support for arch-vt8500.
Support for PLL and device clocks on VT8500, WM8505 and WM8650
are included.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Mike Turquette <mturquette@linaro.org>
2012-09-21 19:23:57 +12:00
Simon Arlott 75fabc3f64 ARM: bcm2835: add stub clock driver
This patch adds a minimal stub clock driver for the BCM2835. Its sole
purpose is to allow the PL011 AMBA clk_get() API calls to provide
something that looks enough like a clock that the driver probes and
operates correctly.

This patch was extracted from git://github.com/lp0/linux.git branch
rpi-split as of 2012/09/08, and modified as follows:

* Reworked to call clk_register_fixed_rate(), and clk_register_clkdev()
  rather than using static data to represent the clocks.
* Moved implementation to drivers/clk/.
* Modified .dev_id for UART clocks to match UART DT node names.
* s/bcm2708/bcm2835/.
* Modified device tree vendor prefix.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dom Cobley <dc4@broadcom.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
2012-09-19 19:08:53 -06:00
Mark Brown 20332ff376 ARM: 7537/1: clk: Fix release in devm_clk_put()
Surprisingly devres_destroy() doesn't call the destructor for the
resource it is destroying, use the newly added devres_release() instead
to fix this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-19 21:51:27 +01:00
Lars-Peter Clausen 8ef997b67f ARM: 7534/1: clk: Make the managed clk functions generically available
The managed clk functions are currently only available when the generic clk
lookup framework is build. But the managed clk functions are merely wrappers
around clk_get and clk_put and do not depend on any specifics of the generic
lookup functions and there are still quite a few custom implementations of the
clk API. So make the managed functions available whenever the clk API is
implemented.

The patch also removes the custom implementation of devm_clk_get for the
coldfire platform.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-15 21:55:27 +01:00
Olof Johansson 83ae0ffa50 mxs-clk-dt-lookup
It replaces clk_register_clkdev in mxs clock driver with DT lookup.
 The series depends on pull request mxs-dt-3.7 and Mike's clk branch
 below.
 
 git://git.linaro.org/people/mturquette/linux.git clk-3.7
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQTvyZAAoJEFBXWFqHsHzO3kEIAKsT3i7vdriXVAityIMiC1el
 pVDR2qVq0q7+MhCIO/wXWbjJBHK+vEiMY2sKWCD4jVfLCa751mwENAdf1h1/+NNZ
 +W6uzRaMt3w4FGryn4/xXt4eVgZNNZba9NxE73tVSanK9oJilPwBLCCkwbZLFbjk
 SughytSMml1uO8Z3mEG0DDmrCnwb1KsILasVLazTGA1gpQ02c+6ASPa8s0App6/2
 DLkIOn6D3022LzQiIungxUc4wLBojylex/GCAPubyhX3pXyjlzUElp4G3AFex8KM
 tMnuXBfpi1dLkgYPn+rkM8m48dCY821LxFT9OA3AfpzqVpRWU6Kcq60vNzUDnt0=
 =scyJ
 -----END PGP SIGNATURE-----

Merge tag 'mxs-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

It replaces clk_register_clkdev in mxs clock driver with DT lookup.

* tag 'mxs-clk-dt-lookup' of git://git.linaro.org/people/shawnguo/linux-2.6:
  clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup
  clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup
2012-09-12 23:04:12 -07:00
Shawn Guo 53f9443da6 clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup
It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx23 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-11 14:45:46 +08:00
Shawn Guo b598b9f311 clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup
It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.

Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx28 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-11 14:45:46 +08:00
Shawn Guo 494bfec999 clk: add of_clk_src_onecell_get() support
For those SoCs that have hundreds of clock outputs, their clock
DT bindings could reasonably define #clock-cells as 1 and require
the client device specify the index of the clock it consumes in the
cell of its "clocks" phandle.

Add a generic of_clk_src_onecell_get() function for this purpose.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-07 18:30:19 -07:00
Ulf Hansson 09b9b2b204 clk: ux500: Define smp_twd clock for u8500
The smp_twd clock is based upon a prcmu_rate clock type
for the PRCMU_ARMSS clock.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 18:00:42 -07:00
Ulf Hansson 70b1fce2ec clk: ux500: Support for prmcu_rate clock
The prmcu_rate clock is not gateable and has a rate which
only can be fetched.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 17:57:08 -07:00
Ulf Hansson a093bde2b4 clk: Provide option for clk_get_rate to issue hw for new rate
By using CLK_GET_RATE_NOCACHE flag, we tell the clk_get_rate API to
issue the hw for an updated clock rate. This can be used for a clock
which rate may be updated without a client necessary modifying it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 17:56:22 -07:00
Jonghwa Lee 73118e6188 clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
This patch supports max77686 mfd's clock driver using common clock frame work.
max77686 has 3 clock ouputs which all are generated from crystal oscillator and
SOC can enable/disable them via I2C bus. All clocks are fixed-rate clock sources
so that it doesn't supply interface for changing clock rate.
Driver uses regmap API to communicate with internal register.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 16:55:38 -07:00
Ulf Hansson ebc96db763 ARM: ux500: Switch to use common clock framework
Remove machine specific clock implementation and switch to use
new common clock framework.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 15:58:20 -07:00
Ulf Hansson 0e6dcde728 clk: ux500: Clock definitions for u8500
First version of clock definitions of PRCMU and PRCC clocks
for the u8500 platform.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 15:58:12 -07:00
Ulf Hansson bce5afd8d9 clk: ux500: First version of clock definitions for ux500
In this first version of the clock definitions, the structure for
ux500 are set. Support for u8500, u9540 and u8540 are prepared.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 15:58:04 -07:00
Ulf Hansson 3b01f87be2 clk: ux500: Adapt PRCMU and PRCC clocks for common clk
First version of common clock implementation of PRCMU clocks
and PRCC clocks for ux500 platforms.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-06 15:57:47 -07:00
Linus Walleij 672575e1de clk: versatile: make config option boolean
There is no choice to have the RealView clocks as module for sure,
so turn this config option into a boolean.

Reported-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-09-04 15:28:42 -07:00
Shawn Guo eeca6e6040 ARM: mxs: retrieve timer irq from device tree
Rather than using the static timer irq definition, we should retrieve
timer irq from device tree for better.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-03 09:31:50 +08:00
Kelvin Cheung 5175cb5894 clk: add Loongson1B clock support
This adds clock support to Loongson1B SoC using the common clock
infrastructure.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-31 11:05:18 -07:00
Chao Xie 4c5bca3419 clk: mmp: add clock definition for mmp2
Initialize the clocks for mmp2

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-28 14:15:42 -07:00
Chao Xie 84a62e6ed7 clk: mmp: add clock definition for pxa910
Initialize the clocks for pxa910

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-28 14:15:28 -07:00
Chao Xie e1b53b3d0f clk: mmp: add clock definition for pxa168
Initialize the clocks for pxa168

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-28 14:15:03 -07:00
Chao Xie 6b63f02318 clk: mmp: add mmp specific clocks
add mmp specific clocks including apbc cloks, apmu clocks,
and pll2, fraction clocks

Signed-off-by: Chao Xie <xiechao.mail@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-28 14:14:14 -07:00
Linus Walleij f9a6aa4303 clk: convert ARM RealView to common clk
This converts the ARM RealView machine over to using the common
clock. The approach is similar to the one used for the Integrator,
and we're reusing the ICST wrapper code.

We have to put the clock intialization in the timer init function
for the clocks to be available when initializing the timer,
keeping them in early_init() is too early for the common clk.

Since we now have to go down and compile drivers/clk/versatile
a CONFIG_COMMON_CLK_VERSATILE symbol has been added so the proper
code gets compiled into the kernel for either machine. A leftover
CLK_VERSATILE in the Integrator Kconfig was fixed up to use
the new symbol as well.

Tested on ARM RealView PB1176.

Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-24 17:42:10 -07:00
Barry Song bc0e489eb0 clk: prima2: move from arch/arm/mach to drivers/clk
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-08-24 12:10:04 -07:00
Marek Vasut 1308239858 mmc: spi: Pull out the SSP clock configuration function
Pull out the MMC clock configuration function and make it
into SSP clock configuration function, so it can be used by
the SPI driver too.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Chris Ball <cjb@laptop.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-17 22:53:00 +01:00
Fengguang Wu e47c6a3408 clk: validate pointer in __clk_disable()
clk_get() returns -ENOENT on error and some careless caller might
dereference it without error checking:

In mxc_rnga_remove():

        struct clk *clk = clk_get(&pdev->dev, "rng");

	// ...

        clk_disable(clk);

Since it's insane to audit the lots of existing and future clk users,
let's add a check in the callee to avoid kernel panic and warn about
any buggy user.

Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:13 -07:00
Viresh Kumar 01da40bf87 clk: remove redundant depends on from drivers/Kconfig
menu "Common Clock Framework" has "depends on COMMON_CLK" and so configs
defined within menu don't require these "depends on COMMON_CLK again".

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Bhupesh Sharma <bhupesh.sharma@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:12 -07:00
Linus Torvalds 9161c3b796 The common clk framework changes for 3.6 include a small number of core
framework improvments, platform ports and new DT bindings.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQDyNXAAoJEDqPOy9afJhJYT8QAMXV2AcB/nF3iOesjj7dZlCB
 qjEDd+fbISQMsvBrj9r4+rSktNWS451I46Yob4lfgfd7aVGD7iA8EK7kd11aSIx7
 fjEfYuCoIBqdl0RJqXrKnXuoO/lKoX7kHdwdYj0BOZRDHoJs4CTpQaEhsTG2Ahp8
 Sn7LmqMFe+hfIIL8gCn9/R0dUa8kGjFlNMN9y4hW01oPYRBNW0m6C9Af3SJlrJ0d
 Besk6c5Q6GHpuwJvir4kw9cghOXIzdJRFO4t9XkVBCWqQTSDhbIObOL9svLljJn/
 OS4HKbvEpT1pY0P63qqzTv6o6VA3zGK+nt/oqa1T7EuZXktBS+G/eRNjAPEQx1BL
 bkLoM2zeSZ4zc/rWGrTk/rLGRSlzcHn1O+fy2P9RwtzhkIzN1FhxWd96FAWpFXsD
 VglwsB/WHQnZpi5VoQTtfqhBne6wo7BdNYpqrvYthG1OjsLgvqdK34HPESzvI+C1
 k9BpLBLkUmfejJeu9Ox28hOlq92WVAqrZPOBSdcM3nyTenYG9JWM+OUytKs+Ph7a
 j8eSopG/Obe63BCTq5lpBJ6gOgjNK7DrmDZPwEDjSe+w/pE08/41uyNgEmzExxs8
 1RQusSJAh6pJblixFYosrXtDsrU2HneJhR5aOFHKrHfqrXZ2bPoG/ut7wBr1opZF
 YJFNnvJ5zTbmku4HiEz8
 =V8ad
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

Pull common clk framework changes from Michael Turquette:
 "This includes a small number of core framework improvments, platform
  ports and new DT bindings."

Fix up trivial conflicts in drivers/clk/Makefile

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits)
  clk: fix compile for OF && !COMMON_CLK
  clk: fix clk_get on of_clk_get_by_name return check
  clk: mxs: clk_register_clkdev mx28 usb clocks
  clk: add highbank clock support
  dt: add clock binding doc to primecell bindings
  clk: add DT fixed-clock binding support
  clk: add DT clock binding support
  ARM: integrator: convert to common clock
  clk: add versatile ICST307 driver
  ARM: integrator: put symbolic bus names on devices
  ARM: u300: convert to common clock
  clk: cache parent clocks only for muxes
  clk: wm831x: Add initial WM831x clock driver
  clk: Constify struct clk_init_data
  clk: Add CLK_IS_BASIC flag to identify basic clocks
  clk: Add support for rate table based dividers
  clk: Add support for power of two type dividers
  clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
  clk: mxs: add clkdev lookup for pwm
  clk: mxs: Fix the GPMI clock name
  ...
2012-07-24 16:40:57 -07:00
Linus Torvalds f01b9b73f5 arm-soc: new SoC support
This adds support for three new SoC types:
 * The mvebu platform includes Marvell's Armada XP and Armada 370 chips,
   made by the mvebu business unit inside of Marvell. Since the same
   group also made the older but similar platforms we call "orion5x",
   "kirkwood", "mv78xx0" and "dove", we plan to move all of them into
   the mach-mvebu directory in the future.
 * socfpga is Altera's platform based on Cortex-A9 cores and a lot of
   FPGA space. This is similar to the Xilinx zynq platform we already
   support. The code is particularly clean, which is helped by the fact
   that the hardware doesn't do much besides the parts that are
   expected to get added in the FPGA.
 * The OMAP subarchitecture gains support for the latest generation,
   the OMAP5 based on the new Cortex-A15 core. Support is rather
   rudimentary for now, but will be extended in the future.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2deGCrR//JCVInAQJLxg/8DHL6usaciRX0rDzxAkv2h0cezjgR/ect
 OfHdxhge7R50NEbf4Jayyly8fIvADJB5nIgk1jhYzAOroVAGxiZQxhyGn3p+Cpbm
 4weu78Uk5habgGA3DmV/R8rKhd1iFtr1DSHbogU43UjPj9Zz5WOREGNJehvxOr/2
 hUfymdqxNg4ivCWyA3w4IKhxA/Hrs351n3J3sY3wjLRPn/uZIlvyx4Q8InteAJZp
 96u5F9y34CxB9SkXAX0P+Bdb0L1fWhZ1J6E8wjOMp/t3LaSXvvWVgCl6MxTcERpf
 jeeABKPTQx99zkH3MdPRQfgBMwsez4L4dXh3qcJaEoqF//UXpE9cTTdjqYu6NRsJ
 znO8Ns8a2X4zX6KF4ySQf2jtLzH4aF21nq6NTJyYyfDWZixqRSKawbSsYqc1vtmi
 ReQ00feJrO60/A4Ks25asUfubqm/SXZ6BfHSgS/ZaOjgJaW9X42CUKnuIywXPTrY
 cAGDh4v1ZrWdXiQIu7oKgESSQNi4GrAEDYqVYs/PmSk2UiuzHcSuPMYxsCmLk8mH
 By7CLByXGOjzD9678LX2VHvKhK2l7Wd+Vkp/pGk4N4fK581JBfyBWfE0T5rpOU28
 +fIFVAV6U0I1OW879b5LmC/kjtmHPxePP6XUcHE152ef1CiT6zm5IE+C2Ukso71V
 +WKxBRBOxII=
 =MwdJ
 -----END PGP SIGNATURE-----

Merge tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull support for three new arm SoC types from Arnd Bergmann:

 - The mvebu platform includes Marvell's Armada XP and Armada 370 chips,
   made by the mvebu business unit inside of Marvell.  Since the same
   group also made the older but similar platforms we call "orion5x",
   "kirkwood", "mv78xx0" and "dove", we plan to move all of them into
   the mach-mvebu directory in the future.

 - socfpga is Altera's platform based on Cortex-A9 cores and a lot of
   FPGA space.  This is similar to the Xilinx zynq platform we already
   support.  The code is particularly clean, which is helped by the fact
   that the hardware doesn't do much besides the parts that are expected
   to get added in the FPGA.

 - The OMAP subarchitecture gains support for the latest generation, the
   OMAP5 based on the new Cortex-A15 core.  Support is rather
   rudimentary for now, but will be extended in the future.

* tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  ARM: socfpga: initial support for Altera's SOCFPGA platform
  arm: mvebu: generate DTBs for supported SoCs
  ARM: mvebu: MPIC: read number of interrupts from control register
  arm: mach-mvebu: add entry to MAINTAINERS
  arm: mach-mvebu: add compilation/configuration change
  arm: mach-mvebu: add defconfig
  arm: mach-mvebu: add documentation for new device tree bindings
  arm: mach-mvebu: add support for Armada 370 and Armada XP with DT
  arm: mach-mvebu: add source files
  arm: mach-mvebu: add header
  clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver
  ARM: Kconfig update to support additional GPIOs in OMAP5
  ARM: OMAP5: Add the build support
  arm/dts: OMAP5: Add omap5 dts files
  ARM: OMAP5: board-generic: Add device tree support
  ARM: omap2+: board-generic: clean up the irq data from board file
  ARM: OMAP5: Add SMP support
  ARM: OMAP5: Add the WakeupGen IP updates
  ARM: OMAP5: l3: Add l3 error handler support for omap5
  ARM: OMAP5: gpmc: Update gpmc_init()
  ...

Conflicts:
	Documentation/devicetree/bindings/arm/omap/omap.txt
	arch/arm/mach-omap2/Makefile
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile
2012-07-23 16:31:31 -07:00
Linus Torvalds 5e512d0785 arm-soc: soc-specific updates
This is stuff that does not fit well into another category and in
 particular is not related to a particular board. The largest part
 in here is extending the am33xx support in the omap platform.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2daGCrR//JCVInAQLnfhAAz7VVS7vgk5uVFpRpLjRda4BEh3clb4xc
 e+sewWFHCgc3cMFC+/+b+jVa/AMKaZO6q6JxqiJFwPI5/m+LfSo0SWtR+e7qo1kc
 sMFFbUWXIh6WmcScKx17+UCrE9VUTmSMIDKpfqvdSuELoqTAHxWWAXh2Ju/P/wuP
 zd0Zd7BdYxpJtFeUqCVwJdoRVYYzz5Uh6/XVBJ17xGLLawRPEh2kARHuhR2zTh+3
 tIrx8VbU5LEWxnGRfft73bA56w+sD1EDOlmXSnkzh7NuCx8BU/IlAUVdUcVITbdb
 w1Wn/pyiIX9ESUAzo5E5SWD2eqxGZ22P6gy4uLdpBS/IAi8Db4CMOcl35bSBCuWB
 tgW/C2dM9ne60mM5mdMjGSEwCBnVxPRGFOdEDmazTePC8ztBBTf92zmpRK5myRHy
 8QL/dUhZ7MSxTAQqfKLLY4h+3N82pfJfNfnv/VVf074sw2wBftKW2BK4+OME48nD
 3cVvyzZGi0S4PEGmp2t+6J8DwoW8aGTl+giXruHPFEtDmJ68+GwtNM+PWTBkOft/
 DIukzRmm865tzzSYYAvqpPJ1E/xNt9bz/LSLb7lpNkQ39ovr89SalkZA2Mf1wBsb
 FtoJacQC5t+4JZecJBn7wudiQZ+sRcKhwk0DB816ZuWEsV2XPWGD/LSinoOkr1Jt
 YGITeGyZe9w=
 =Qclg
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm soc-specific updates from Arnd Bergmann:
 "This is stuff that does not fit well into another category and in
  particular is not related to a particular board.  The largest part in
  here is extending the am33xx support in the omap platform."

Fix up trivial conflicts in arch/arm/mach-{imx/mach-mx35_3ds.c, tegra/Makefile}

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
  ARM: LPC32xx: Add PWM support
  ARM: LPC32xx: Add PWM clock
  ARM: LPC32xx: Set system serial based on cpu unique id
  ARM: vexpress: Config option for early printk console
  ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile
  ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses
  ARM: vexpress: Add fixed regulator for SMSC
  ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files
  ARM: vexpress: Initial common clock support
  ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk API
  ARM: EXYNOS: Add missing static storage class specifier in pmu.c file
  ARM: EXYNOS: Make combiner_init function static
  ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12
  ARM: versatile: Make plat-versatile clock optional
  ARM: vexpress: Check master site in daughterboard's sysctl operations
  ARM: vexpress: remove automatic errata workaround selection
  ARM: LPC32xx: Adjust to pl08x DMA interface changes
  ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset
  ARM: imx: fix mx51 ehci setup errors
  ARM: imx: make ehci power/oc polarities configurable
  ...
2012-07-23 16:08:40 -07:00
Rob Herring 137f8a7213 clk: fix compile for OF && !COMMON_CLK
With commit 766e6a4ec6 (clk: add DT clock binding support),
compiling with OF && !COMMON_CLK is broken.

Reported-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Reported-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-19 14:07:56 -07:00
Shawn Guo 9f1612d351 clk: fix clk_get on of_clk_get_by_name return check
The commit 766e6a4 (clk: add DT clock binding support) plugs device
tree clk lookup of_clk_get_by_name into clk_get, and fall on non-DT
lookup clk_get_sys if DT lookup fails.

The return check on of_clk_get_by_name takes (clk != NULL) as a
successful DT lookup.  But it's not the case.  For any system that
does not define clk lookup in device tree, ERR_PTR(-ENOENT) will be
returned, and consequently, all the client drivers calling clk_get
in their probe functions will fail to probe with error code -ENOENT
returned.

Fix the issue by checking of_clk_get_by_name return with !IS_ERR(clk),
and update of_clk_get and of_clk_get_by_name for !CONFIG_OF build
correspondingly.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-19 14:07:45 -07:00
Dinh Nguyen 66314223aa ARM: socfpga: initial support for Altera's SOCFPGA platform
Adding core definitions for Altera's SOCFPGA ARM platform.
Mininum support for Altera's SOCFPGA Cyclone 5 hardware.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Rob Herring <rob.herring@calxeda.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-19 10:39:00 +02:00
Vipul Kumar Samar d4f513ff12 Clk: SPEAr1340: Update sys clock parent array
sys_clk has multiple parents and selection of parent depends on sys_clk_ctrl
register bit no. 23:25, with following possibilities

   0XX: pll1_clk
   10X: sys_synth_clk
   110: pll2_clk
   111: pll3_clk

Out of several possibilities (h/w wise) to select same clock parent for
sys_clk, current clock implementation was considering just one value.

When bootloader programmed different (valid) value to select a clock
parent then Linux breaks.

Here, we try to include all possibilities which can lead to same
clock selection thus making Linux independent of bootloader selection
values.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18 10:04:53 +05:30
Vipul Kumar Samar d9ba8db215 clk: SPEAr1340: Fix clk enable register for uart1 and i2c1.
This patch is to fix typing mistake of clk enable register of i2c1 and
uart1.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-07-18 10:04:48 +05:30
Vipul Kumar Samar a8f4bf0eb4 Clk:spear6xx:Fix: Rename clk ids within predefined limit
The max limit of con_id is 16 and dev_id is 20. As of now for spear6xx, many clk
ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    ras_gen1_synth_gate_clk -> ras_syn1_gclk
    pll3_48m -> pll3_

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 10:04:42 +05:30
Vipul Kumar Samar 5cfc545f50 Clk:spear3xx:Fix: Rename clk ids within predefined limit
The max limit of con_id is 16 and dev_id is 20. As of now for spear3xx, many clk
ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    ras_gen1_synth_gate_clk -> ras_syn1_gclk
    ras_pll3_48m -> ras_pll3_
    pll3_48m -> pll3_

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 10:04:39 +05:30
Vipul Kumar Samar e28f1aa110 clk:spear1310:Fix: Rename clk ids within predefined limit
The max limit of con_id is 16 and dev_id is 20. As of now for spear1310, many
clk ids are exceeding this predefined limit.

This patch is intended to rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    gmac_phy -> phy_
    gmii_125m_pad -> gmii_pad

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 10:04:36 +05:30
Vipul Kumar Samar 5cb6a9bcca clk:spear1340:Fix: Rename clk ids within predefined limit
The max limit of con_id is 16 and dev_id is 20. As of now for spear1340, many
clk ids are exceeding this predefined limit.

This patch rename clk ids like:
    mux_clk -> _mclk
    gate_clk -> _gclk
    synth_clk -> syn_clk
    gmac_phy -> phy_
    gmii_125m_pad_ -> gmii_pad

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-07-18 10:04:33 +05:30
Mike Turquette c782c384d2 Merge branch 'clk/mxs-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into clk-next 2012-07-12 09:48:19 -07:00
Richard Zhao 79ddff903e clk: mxs: clk_register_clkdev mx28 usb clocks
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-07-12 13:13:33 +08:00
Rob Herring 8d4d9f5208 clk: add highbank clock support
This adds real clock support to Calxeda Highbank SOC using the common
clock infrastructure.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[mturquette@linaro.org: fixed up invalid writes to const struct member]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-07-11 17:58:47 -07:00