Граф коммитов

159 Коммитов

Автор SHA1 Сообщение Дата
Takashi Iwai 7362b0fca5 ALSA: hda: Proper endian notations for BDL pointers
The BDL pointer used in snd_hdac_dsp_prepare() should be declared as
__le32, as warned by sparse:
  sound/hda/hdac_stream.c:655:47: warning: incorrect type in argument 4 (different base types)
  sound/hda/hdac_stream.c:655:47:    expected restricted __le32 [usertype] **bdlp
  sound/hda/hdac_stream.c:655:47:    got unsigned int [usertype] **<noident>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27 09:06:01 +02:00
Takashi Iwai a6ea5fe95a ALSA: hda: Fix implicit PCM format type conversion
The PCM format type is defined with __bitwise, hence it can't be
passed as integer but needs an explicit cast.  In this patch, instead
of the messy cast flood, define the format argument of
snd_hdac_calc_stream_format() to be the proper snd_pcm_format_t type.

This fixes sparse warnings like:
  sound/hda/hdac_device.c:760:38: warning: incorrect type in argument 1 (different base types)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27 09:05:24 +02:00
Takashi Iwai f9b54e1961 ALSA: hda/i915: Allow delayed i915 audio component binding
Currently HD-audio i915 audio binding doesn't support any delayed
binding, and supposes that the i915 driver registers the component
immediately.  This has been OK, so far, but the work-in-progress
change in i915 may introduce the asynchronous binding, which
effectively delays the component registration.

For addressing it, implement a completion to be synced with the master
binding.  The timeout is set to 10 seconds which should be long enough
and hopefully be not too annoying if anyone boots up a debugging
session with i915 KMS turned off.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-24 12:32:44 +02:00
Takashi Iwai a57942bfdd ALSA: hda: Make audio component support more generic
This is the final step for more generic support of DRM audio
component.  The generic audio component code is now moved to its own
file, and the symbols are renamed from snd_hac_i915_* to
snd_hdac_acomp_*, respectively.  The generic code is enabled via the
new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is
kept as the super-class.

Along with the split, three new callbacks are added to audio_ops:
pin2port is for providing the conversion between the pin number and
the widget id, and master_bind/master_unbin are called at binding /
unbinding the master component, respectively.  All these are optional,
but used in i915 implementation and also other later implementations.

A note about the new snd_hdac_acomp_init() function: there is a slight
difference between this and the old snd_hdac_i915_init().  The latter
(still) synchronizes with the master component binding, i.e. it
assures that the relevant DRM component gets bound when it returns, or
gives a negative error.  Meanwhile the new function doesn't
synchronize but just leaves as is.  It's the responsibility by the
caller's side to synchronize, or the caller may accept the
asynchronous binding on the fly.

v1->v2: Fix missing NULL check in master_bind/unbind

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17 22:25:48 +02:00
Takashi Iwai 82887c0beb ALSA: hda/i915: Associate audio component with devres
The HD-audio i915 binding code contains a single pointer, hdac_acomp,
for allowing the access to audio component from the master bind/unbind
callbacks.  This was needed because the callbacks pass only the device
pointer and we can't guarantee the object type assigned to the drvdata
(which is free for each controller driver implementation).
And this implementation will be a problem if we support multiple
components for different DRM drivers, not only i915.

As a solution, allocate the audio component object via devres and
associate it with the given device, so that the component callbacks
can refer to it via devres_find().

The removal of the object is still done half-manually via
devres_destroy() to make the code consistent (although it may work
without the explicit call).

Also, the snd_hda_i915_register_notifier() had the reference to
hdac_acomp as well.  In this patch, the corresponding code is removed
by passing hdac_bus object to the function, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17 22:25:47 +02:00
Takashi Iwai ae891abe7c drm/i915: Split audio component to a generic type
For allowing other drivers to use the DRM audio component, rename the
i915_audio_component_* with drm_audio_component_*, and split the
generic part into drm_audio_component.h.  The i915 specific stuff
remains in struct i915_audio_component, which contains
drm_audio_component as the base.

The license of drm_audio_component.h is kept to MIT as same as the the
original i915_component.h.

This is a preliminary change for further development, and no
functional changes by this patch itself, merely code-split and
renames.

v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915
        argument in drm_audio_component.h

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17 22:25:19 +02:00
Rakesh Ughreja cb04ba3318 ALSA: hdac: add extended ops in the hdac_bus
Add extended ops in the hdac_bus to allow calling the ASoC HDAC library
ops to reuse the legacy HDA codec drivers with ASoC framework.
Extended ops are used by the legacy codec drivers to call into
hdac_hda library, in the subsequent patches..

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28 07:33:29 +02:00
Rakesh Ughreja 6298542fa3 ALSA: hdac: remove memory allocation from snd_hdac_ext_bus_device_init
Remove memory allocation within snd_hdac_ext_bus_device_init, to make
its behaviour identical to snd_hdac_bus_device_init. So that caller
can allocate the parent data structure containing hdac_device.
This API change helps in reusing the legacy HDA codec drivers with
ASoC platform drivers.

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28 07:33:29 +02:00
Rakesh Ughreja f8a7fe1aea ALSA: hdac: ext: add wait for codec to respond after link reset
As per HDA spec section 4.3 - Codec Discovery, the software shall wait
for atleast 521usec for codec to respond after link reset.
With the multi-link capability each link is turned ON/OFF individually.
Link controller drives reset signal when it is turned ON.

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28 07:33:29 +02:00
Rakesh Ughreja e1df9317cb ALSA: hdac: Remove usage of struct hdac_ext_driver, use hdac_driver instead
This patch removes the hdac_ext_driver structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28 07:33:29 +02:00
Rakesh Ughreja 76f56fae1c ALSA: hdac: Remove usage of struct hdac_ext_bus and use hdac_bus instead
This patch removes the hdac_ext_bus structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.

Follow-up patches in this series handle the driver definition.

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28 07:33:29 +02:00
Rakesh Ughreja 3787a39852 ALSA: hdac: Remove usage of struct hdac_ext_device and use hdac_device instead
This patch removes the hdac_ext_device structure. The legacy and
enhanced HDaudio capabilities can be handled in a backward-compatible
way without separate definitions.

Follow-up patches in this series handle the bus and driver definitions.

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28 07:33:29 +02:00
Takashi Iwai a9c2dfc852 ALSA: hda - Use a macro for snd_array iteration loops
Introduce a new helper macro, snd_array_for_each(), to iterate for
each snd_array element.  It slightly improves the readability than
lengthy open codes at each place.

Along with it, add const prefix to some obvious places.

There should be no functional changes by this.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24 13:41:53 +02:00
Abhijeet Kumar 0978749253 ALSA: hda: Copying sync power state helper to core
The current sync_power_state is local to hda code, moving it
core so that other users apart from hda legacy can use it.
The helper function ensures the actual state reaches the target state.

Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-12 13:59:39 +01:00
Mark Brown 747c908427
Merge remote-tracking branches 'asoc/topic/dai-drv', 'asoc/topic/davinci', 'asoc/topic/disconnect', 'asoc/topic/ep93xx' and 'asoc/topic/eukrea-tlv320' into asoc-next 2018-01-05 12:43:44 +00:00
Takashi Iwai a36c263838 ALSA: hda: Drop useless WARN_ON()
Since the commit 97cc2ed27e ("ALSA: hda - Fix yet another i915
pointer leftover in error path") cleared hdac_acomp pointer, the
WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give
a false-positive warning, as the function gets called no matter
whether the component is registered or not.  For fixing it, let's get
rid of the spurious WARN_ON().

Fixes: 97cc2ed27e ("ALSA: hda - Fix yet another i915 pointer leftover in error path")
Cc: <stable@vger.kernel.org>
Reported-by: Kouta Okamoto <kouta.okamoto@toshiba.co.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-22 10:56:56 +01:00
Ughreja, Rakesh A f0c5ebebac
ASoC: hdac_hdmi: clean up hdac_device variable names
This patch renames all the variable instances of hdac_device with hdev
to prepare the code base to remove the usage of hdac_ext_device
data structures done in the following patches. Existing code uses hdev
and hdac as variable names for hdac_device as well as hdac_ext_device,
which creates confusion.

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01 12:48:16 +00:00
Takashi Iwai c2432466f5 ALSA: hda: Fix too short HDMI/DP chmap reporting
We got a regression report about the HD-audio HDMI chmap, where some
surround channels are reported as UNKNOWN.  The git bisection pointed
the culprit at the commit 9b3dc8aa3f ("ALSA: hda - Register chmap
obj as priv data instead of codec").  The story behind scene is like
this:

- While moving the code out of the legacy HDA to the HDA common place,
  the patch modifies the code to obtain the chmap array indirectly in
  a byte array, and it expands it to kctl value array.
- At the latter operation, the size of the array is wrongly passed by
  sizeof() to the pointer.
- It can be 4 on 32bit arch, thus too short for 6+ channels.
  (And that's the reason why it didn't hit other persons; it's 8 on
  64bit arch, thus it's usually enough.)

The code was further changed meanwhile, but the problem persisted.
Let's fix it by correctly evaluating the array size.

Fixes: 9b3dc8aa3f ("ALSA: hda - Register chmap obj as priv data instead of codec")
Reported-by: VDR User <user.vdr@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-17 12:20:37 +01:00
Takashi Iwai 76727c2c3b ASoC: Updates for v4.15
The biggest thing this release has been the conversion of the AC98 bus
 to the driver model, that's been a long time coming so thanks to Robert
 Jarzmik for his dedication there.  Due to there being some AC97 MFD
 there's a few fairly large changes in input and the MFD layer, mainly to
 the wm97xx driver.
 
 There's also some drivers/drm changes to support the new AMD Stoney
 platform, these are shared with the DRM subsystem and should be being
 merged via both.
 
 Within the subsystem the overwhelming bulk of the changes is in the
 Intel drivers which continue to need lots of cleanups and fixes, this
 release they've also gained support for their open source firmware.
 There's also some large changs in the core as Morimoto-san continues to
 mirror operations into the component level in preparation for conversion
 of drivers to that.
 
  - The AC97 bus has finally caught up with the driver model thanks to
    some dedicated and persistent work from Robert Jarzmik.
  - Continued work from Morimoto-san on moving us towards being able to
    use components for everything.
  - Lots of cleanups for the Intel platform code, including support for
    their open source audio firmware.
  - Support for scaling MCLK with sample rate in simple-card.
  - Support for AMD Stoney platform.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJhwMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0KzbB/9tXryXYz3dnKVlm9rk+Cq0Xy4TrUNk
 WY+Il+Di1b6CQJbAm9GSacJxR+siupZCjGC5roHznj/AA2l0RuxJXpxG40Db8ZX+
 bDR7mIWtuTUJHazqXltafj9ydElRKVpOGPAi5YJhhW5bXQ3SR9fFy0D3mdcT02v4
 SyMExhOMz+mdnuBhbWx9kqJ9LPzCs0ow+R4uoRgAQxpFXPBGtq06sMkK86lGfsl/
 iRM36J6FIeIQQfSHG/dkkpoybVax43z4OH7G1IL2FOU7miwkjZh/TTh/xHTd86Mc
 OOuGu4hB+MjvccSOa9HSrOqFjxtkZipstwqYVWoYQcUoIVpcg0YRk7TG
 =5KBY
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.15

The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there.  Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.

There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.

Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.

 - The AC97 bus has finally caught up with the driver model thanks to
   some dedicated and persistent work from Robert Jarzmik.
 - Continued work from Morimoto-san on moving us towards being able to
   use components for everything.
 - Lots of cleanups for the Intel platform code, including support for
   their open source audio firmware.
 - Support for scaling MCLK with sample rate in simple-card.
 - Support for AMD Stoney platform.
2017-11-13 15:45:57 +01:00
Takashi Iwai c429bda21f Merge branch 'for-next' into for-linus
Pull 4.15 updates to take over the previous urgent fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-13 15:43:13 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Rakesh Ughreja b676da70c4 ALSA: hda: Abort capability probe on invalid capability
On reading wrong capability pointer values driver may crash, so whenever
driver discovers unknown HDA capability, log it as error and stop traversing
the link list further.

Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-24 08:13:55 +02:00
Takashi Iwai 9780ded39b ALSA: hda: Avoid racy recreation of widget kobjects
The refresh of HD-audio widget sysfs kobjects via
snd_hdac_refresh_widget_sysfs() is slightly racy.
The driver recreates the whole tree from scratch after deleting the
whole.  When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject
release doesn't happen immediately but delayed, while the re-creation
of the same named kobject happens soon after invoking kobject_put().
This may end up with the conflicts of duplicated kobjects, as found in
the bug report below.

In this patch, we take another approach to refresh the tree: instead
of recreating the whole tree, just add the new nodes and delete the
non-existing nodes.  Since the refresh happens only once at
initialization, no longer race would happen.

Along with the code change, merge snd_hdac_refresh_widget_sysfs() with
the existing snd_hdac_refresh_widgets() with an additional bool flag
for simplifying the code.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-19 13:58:36 +02:00
Takashi Iwai 098a0a62c1 ALSA: hda: Abort capability probe at invalid register read
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when
it hits an invalid register value read:

 BUG: unable to handle kernel paging request at ffffad5dc41f3fff
 IP: pci_azx_readl+0x5/0x10 [snd_hda_intel]
 Call Trace:
  snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core]
  azx_probe_continue+0x7d5/0x940 [snd_hda_intel]
  .....

This happened on a new Intel machine, and we need to check the value
and abort the loop accordingly.

[Note: the fixes tag below indicates only the commit where this patch
 can be applied; the original problem was introduced even before that
 commit]

Fixes: 6720b38420 ("ALSA: hda - move bus_parse_capabilities to core")
Cc: <stable@vger.kernel.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-18 12:26:44 +02:00
Arvind Yadav 6c5a266029 ALSA: hda: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2610	    304	      8	   2922	    b6a	sound/hda/hdac_i915.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2674	    240	      8	   2922	    b6a	sound/hda/hdac_i915.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-18 20:01:21 +02:00
Takashi Iwai eb8d0eaaf8 ALSA: hda: Fix potential race at unregistration and unsol events
When the codec device is unregistered / freed, it may release the
resource while being used in an unsolicited event like the jack
detection work.  This leads to use-after-free.

The fix here is to unregister the device at first, i.e. removing the
codec from the list, then flushing the pending works to assure that
all unsol events are gone.  After this point, we're free from
accessing the codec via unsol events, thus can release the resources
gracefully.

The issue was spotted originally by Intel CI, but it couldn't be
reproduced reliably by its nature.  So let's hope this fix really
addresses the whole issues.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196045
Reported-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-20 07:53:57 +02:00
Jeeja KP 960013762d ALSA: hda: Fix cpu lockup when stopping the cmd dmas
Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out
when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq())
causes hard lockup so unlock while waiting using jiffies.

---<-snip->---
<0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
<4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem
<4>[ 1211.603053] irq event stamp: 13366
<4>[ 1211.603053] hardirqs last  enabled at (13365):
...
<4>[ 1211.603059] Call Trace:
<4>[ 1211.603059]  ? delay_tsc+0x3d/0xc0
<4>[ 1211.603059]  __delay+0xa/0x10
<4>[ 1211.603060]  __const_udelay+0x31/0x40
<4>[ 1211.603060]  snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core]
<4>[ 1211.603060]  ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel]
<4>[ 1211.603061]  snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core]
<4>[ 1211.603061]  azx_stop_chip+0x9/0x10 [snd_hda_codec]
<4>[ 1211.603061]  azx_suspend+0x72/0x220 [snd_hda_intel]
<4>[ 1211.603061]  pci_pm_suspend+0x71/0x140
<4>[ 1211.603062]  dpm_run_callback+0x6f/0x330
<4>[ 1211.603062]  ? pci_pm_freeze+0xe0/0xe0
<4>[ 1211.603062]  __device_suspend+0xf9/0x370
<4>[ 1211.603062]  ? dpm_watchdog_set+0x60/0x60
<4>[ 1211.603063]  async_suspend+0x1a/0x90
<4>[ 1211.603063]  async_run_entry_fn+0x34/0x160
<4>[ 1211.603063]  process_one_work+0x1f4/0x6d0
<4>[ 1211.603063]  ? process_one_work+0x16e/0x6d0
<4>[ 1211.603064]  worker_thread+0x49/0x4a0
<4>[ 1211.603064]  kthread+0x107/0x140
<4>[ 1211.603064]  ? process_one_work+0x6d0/0x6d0
<4>[ 1211.603065]  ? kthread_create_on_node+0x40/0x40
<4>[ 1211.603065]  ret_from_fork+0x2e/0x40

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419
Fixes: 38b19ed7f8 ("ALSA: hda: fix to wait for RIRB & CORB DMA to set")
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
CC: stable <stable@vger.kernel.org> # 4.7
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-10 08:47:17 +02:00
Takashi Iwai a5c3b32a11 ASoC: Updates for v4.12
A quiet release for the core, but lots of new drivers this time around:
 
  - A new, generalized, API for hooking up jacks which makes it easier to
    write generic machine drivers for simple cases.
  - Continuing fixes for issues with the x86 CPU drivers.
  - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
    HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
    NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
    DA7213
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlkH9Q4THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0D24B/4oQ67H01Tcq0ghrIsr/UNQnPi+ywx2
 e5nkWNvWTM7gSUDOFjmD3ZM07Gf66IIyiFFSt6w93/lDQaOcGgsmBo9tnujR7ytQ
 XXUiE1bvx7liZ09/2Rq7DyDXTpYcFAbxLdWt8uGs72misj0XrVToVFJhl5YcMRBE
 qnbV1woxQwIvJ5m+GmbW2NZ8bRCnnsMQbBWCIWOtvSPhtZQlQ+m7waYTVn3/ieGR
 cWIHwY4lSZycqaYDWZ+RPFipcAwzKTNt0MiXoCI02EX95275AbIHdWAgrVta04Al
 muWP1XTkufO73NFqfvEF+Rrpi69pRCNhAS7TJY++d1moKCYgSpG8bAvD
 =W3eF
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.12

A quiet release for the core, but lots of new drivers this time around:

 - A new, generalized, API for hooking up jacks which makes it easier to
   write generic machine drivers for simple cases.
 - Continuing fixes for issues with the x86 CPU drivers.
 - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132,
   HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton
   NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with
   DA7213
2017-05-02 08:25:25 +02:00
Libin Yang dde5bff541 ALSA: hda - add more ML register definitions
This patch refines the definition of AZX_MLCTL_SPA and AZX_MLCTL_CPA
and add more definitions of ML registers

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-07 10:39:18 +02:00
Takashi Iwai 2c1f81381e ALSA: hda - Avoid tricky macros
The macros _snd_hdac_chip_read() and *_write() expand to different
types (b,w,l) per their argument.  They were thought to be used only
internally for other snd_hdac_chip_*() macros, but in some situations
we need to call these directly, and they are way too ugly.

Instead of saving a few lines, we just write these macros explicitly
with the types, so that they can be used in a saner way.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03 08:42:43 +02:00
Mark Brown 240a07dbc3 Merge branch 'topic/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2017-03-29 12:50:26 +01:00
B, Jayachandran ccfdf9f6a4 ALSA: hda: Fix LLCH register read
LLCH is a 16 bit register. Use readw instead of readl API.

Signed-off-by: B, Jayachandran <jayachandran.b@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:01:35 +01:00
Mark Brown dbbc21bbf2 Linux 4.10-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYYGCgAAoJEHm+PkMAQRiGjVMH/R1WKLSCVyU2QboSTZVyBGqU
 6E42pMalPNaY72uxf29ZmUzds1uV5KyFn7OntsyD4qc+sQb2wxG5PvMSYAsL7HKN
 lTFiW738zC9Hfx8MzC/fHLGm/7HTHpPFndZJkDOJjIPnS0MeTHAmOFM+RwCRq+px
 5uvRHV4Z8yibHtijET6GqCywV0gw/uyXCi6xJfJNAspnj3hsm3ZXKJ0JPvP2ja+V
 yhdnWYHDEQwRs6FyNtIWnfjH92XilVn4KcOtwnb1pFahALiTmmVqJVMiGartagqJ
 fPRw98B3YHwmZpEc2SDbXaZi36WLu4hcWvvDa22SN/srXwYIzzblEwuNq1+fiBw=
 =X7z+
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc1' into asoc-intel

Linux 4.10-rc1
2017-01-24 16:24:18 +00:00
Jeeja KP 09a8bf812c ALSA: hda: check stream decoupled register state
Check stream decoupled register value with requested value
before decoupling/coupling the stream.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-06 18:16:10 +00:00
Thomas Gleixner a5a1d1c291 clocksource: Use a plain u64 instead of cycle_t
There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
2016-12-25 11:04:12 +01:00
Dave Airlie 5481e27f6f Merge tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel into drm-next
- first slice of the gvt device model (Zhenyu et al)
- compression support for gpu error states (Chris)
- sunset clause on gpu errors resulting in dmesg noise telling users
  how to report them
- .rodata diet from Tvrtko
- switch over lots of macros to only take dev_priv (Tvrtko)
- underrun suppression for dp link training (Ville)
- lspcon (hmdi 2.0 on skl/bxt) support from Shashank Sharma, polish
  from Jani
- gen9 wm fixes from Paulo&Lyude
- updated ddi programming for kbl (Rodrigo)
- respect alternate aux/ddc pins (from vbt) for all ddi ports (Ville)

* tag 'drm-intel-next-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (227 commits)
  drm/i915: Update DRIVER_DATE to 20161024
  drm/i915: Stop setting SNB min-freq-table 0 on powersave setup
  drm/i915/dp: add lane_count check in intel_dp_check_link_status
  drm/i915: Fix whitespace issues
  drm/i915: Clean up DDI DDC/AUX CH sanitation
  drm/i915: Respect alternate_ddc_pin for all DDI ports
  drm/i915: Respect alternate_aux_channel for all DDI ports
  drm/i915/gen9: Remove WaEnableYV12BugFixInHalfSliceChicken7
  drm/i915: KBL - Recommended buffer translation programming for DisplayPort
  drm/i915: Move down skl/kbl ddi iboost and n_edp_entires fixup
  drm/i915: Add a sunset clause to GPU hang logging
  drm/i915: Stop reporting error details in dmesg as well as the error-state
  drm/i915/gvt: do not ignore return value of create_scratch_page
  drm/i915/gvt: fix spare warnings on odd constant _Bool cast
  drm/i915/gvt: mark symbols static where possible
  drm/i915/gvt: fix sparse warnings on different address spaces
  drm/i915/gvt: properly access enabled intel_engine_cs
  drm/i915/gvt: Remove defunct vmap_batch()
  drm/i915/gvt: Use common mapping routines for shadow_bb object
  drm/i915/gvt: Use common mapping routines for indirect_ctx object
  ...
2016-10-25 16:39:43 +10:00
Pandiyan, Dhinakaran f931894194 drm/i915/dp: DP audio API changes for MST
DP MST provides the capability to send multiple video and audio streams
through a single port. This requires the API's between i915 and audio
drivers to distinguish between multiple audio capable displays that can be
connected to a port. Currently only the port identity is shared in the
APIs. This patch adds support for MST with an additional parameter
'int pipe'. The existing parameter 'port' does not change it's meaning.

pipe =
	MST	: display pipe that the stream originates from
	Non-MST	: -1

Affected APIs:
struct i915_audio_component_ops
-       int (*sync_audio_rate)(struct device *, int port, int rate);
+	int (*sync_audio_rate)(struct device *, int port, int pipe,
+	     int rate);

-       int (*get_eld)(struct device *, int port, bool *enabled,
-                       unsigned char *buf, int max_bytes);
+       int (*get_eld)(struct device *, int port, int pipe,
+		       bool *enabled, unsigned char *buf, int max_bytes);

struct i915_audio_component_audio_ops
-       void (*pin_eld_notify)(void *audio_ptr, int port);
+       void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);

This patch makes dummy changes in the audio drivers (thanks Libin) for
build to succeed. The audio side drivers will send the right 'pipe' values
for MST in patches that will follow.

v2:
Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
Included Asoc driver API compatibility changes from Jeeja.
Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
Added comment for av_enc_map[] definition. (Takashi)

v3:
Fixed logic error introduced while renaming 'dev_id' as 'pipe' (Ville)
Renamed get_saved_encoder() to get_saved_enc() to reduce line length

v4:
Rebased.
Parameter check for pipe < -1 values in get_saved_enc() (Ville)
Switched to for_each_pipe() in get_saved_enc() (Ville)
Renamed 'pipe' to 'dev_id' in audio side code (Takashi)

v5:
Included a comment for the dev_id arg. (Libin)

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474488168-2343-1-git-send-email-dhinakaran.pandiyan@intel.com
2016-09-22 09:01:55 -07:00
Colin Ian King 361763127f ALSA: hdac: add missing \n to end of dev_err messages
Trival fix, some dev_err messages are missing a \n, so add it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-16 19:23:57 +02:00
Vinod Koul 404735c9fd ALSA - Ext hda: remove bus_parse_capabilities
Remove the unused one as we have moved it up to hdac core.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09 08:53:56 +02:00
Vinod Koul ec8ae5703d ALSA: convert users to core bus_parse_capabilities
Now that we have the bus parse capabilities moved to core, we need to
convert users.

The SKL driver and HDA extended lib needs to converted in single patch,
otherwise we regress on the functionality.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09 08:53:56 +02:00
Vinod Koul 6720b38420 ALSA: hda - move bus_parse_capabilities to core
HDA capability introduced recently are move to hdac core so that it can
be used by legacy driver as well. Also move the capability pointers up
to hdac_bus object.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-09 08:53:56 +02:00
Takashi Iwai 33baefe5e7 ALSA: hda: Fix krealloc() with __GFP_ZERO usage
krealloc() doesn't work always properly with __GFP_ZERO flag as
expected.  For clearing the reallocated area, we need to clear
explicitly instead.

Reported-by: Joe Perches <joe@perches.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-03 15:17:22 +02:00
Takashi Iwai cf81d6b583 Merge branch 'for-next' into for-linus
Merged 4.8 changes.
2016-07-25 17:01:14 +02:00
Jaroslav Kysela 8198868f0a ALSA: hdac_regmap - fix the register access for runtime PM
Call path:

  1) snd_hdac_power_up_pm()
  2) snd_hdac_power_up()
  3) pm_runtime_get_sync()
  4) __pm_runtime_resume()
  5) rpm_resume()

The rpm_resume() returns 1 when the device is already active.
Because the return value is unmodified, the hdac regmap read/write
functions should allow this value for the retry I/O operation, too.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-17 14:01:06 +02:00
Libin Yang 960a581e22 ALSA: hda: fix some klockwork scan warnings
This patch fixes some warnings from klockwork.

These warnings are not the real issues. The patch
adds the sanity check.

Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-06-16 10:10:12 +02:00
Takashi Iwai a158f2b79f ASoC: Updates for v4.7
The updates this time around are almost all driver code:
 
  - Further slow progress on the topology code.
  - Substantial updates and improvements for the da7219, es8328, fsl-ssi
    Intel and rcar drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXOao7AAoJECTWi3JdVIfQ3EQH/1Z4nukvcOeZgVN/4K9b27t2
 LYSyPH4+7XiDsi24UAyxZWls625t+1XRtolS0yHYY+IMObkeH/T+StTirDG4C1Mv
 0uw/lEs5XmkSPFMad2fDcVXhf+D6EsvuLZ24qLKhoi8TyePv6GRvYapitE4dAI7Z
 bBwjT+f9r1qSMJvfCmqit8zDneDFMKd7oqPmBW6NpFri5/ksn1KUnd/zOGu2SlSd
 R01Oa2VbRDGj8/Zzu5MORvgLLucxTqtAFYeF3T52M5oc33IBWvbha4fk/BDOswbz
 H9S3vHyakmbZgXnnGMTp4qz0bxA76YaHzjtqgGUEMbigHTsB0PP5TtII3i5LkaY=
 =Zsr1
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.7

The updates this time around are almost all driver code:

 - Further slow progress on the topology code.
 - Substantial updates and improvements for the da7219, es8328, fsl-ssi
   Intel and rcar drivers.
2016-05-16 14:59:00 +02:00
Mark Brown 515511a792 Merge remote-tracking branch 'asoc/topic/hdmi' into asoc-next 2016-05-13 14:27:16 +01:00
Mark Brown c988e26130 Merge remote-tracking branch 'asoc/topic/intel' into asoc-next 2016-05-13 14:26:22 +01:00
Vinod Koul 4446085d21 ALSA: hdac: add link pm and ref counting
The HDA links can be switched off when not is use, similarly
command DMA can be stopped as well. This calls for a reference
counting mechanism on the link by it's users to manage the link
power. The DMA can be turned off when all links are off

For this we add two APIs
	snd_hdac_ext_bus_link_get
	snd_hdac_ext_bus_link_put

They help users to turn up/down link and manage the DMA as well

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-13 11:43:00 +01:00
Takashi Iwai 2e00fde5c6 Merge branch 'for-linus' into for-next 2016-05-10 16:06:04 +02:00