Changing the reset module parameter has no effect on a running GuC.
The corresponding entry in the ADS must be updated and then the GuC
informed via a Host2GuC message.
The new debugfs interface to module parameters allows this to happen.
However, connecting the parameter data address back to anything useful
is messy. One option would be to pass a new private data structure
address through instead of just the parameter pointer. However, that
means having a new (and different) data structure for each parameter
and a new (and different) write function for each parameter. This
method keeps everything generic by instead using a string lookup on
the directory entry name.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-22-matthew.brost@intel.com
Use the official driver default scheduling policies for configuring
the GuC scheduler rather than a bunch of hardcoded values.
v2:
(Matthew Brost)
- Move I915_ENGINE_WANT_FORCED_PREEMPTION to later patch
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-21-matthew.brost@intel.com
In the case of a full GPU reset (e.g. because GuC has died or because
GuC's hang detection has been disabled), the driver can't rely on GuC
reporting the guilty context. Instead, the driver needs to scan all
active contexts and find one that is currently executing, as per the
execlist mode behaviour. In GuC mode, this scan is different to
execlist mode as the active request list is handled very differently.
Similarly, the request state dump in debugfs needs to be handled
differently when in GuC submission mode.
Also refactured some of the request scanning code to avoid duplication
across the multiple code paths that are now replicating it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-20-matthew.brost@intel.com
We receive notification of an engine reset from GuC at its
completion. Meaning GuC has potentially cleared any HW state
we may have been interested in capturing. GuC resumes scheduling
on the engine post-reset, as the resets are meant to be transparent,
further muddling our error state.
There is ongoing work to define an API for a GuC debug state dump. The
suggestion for now is to manually disable FW initiated resets in cases
where debug state is needed.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-19-matthew.brost@intel.com
Clear the 'disable resets' flag to allow GuC to reset hung contexts
(detected via pre-emption timeout).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-18-matthew.brost@intel.com
It is impossible to seal all race conditions of resets occurring
concurrent to other operations. At least, not without introducing
excesive mutex locking. Instead, don't complain if it occurs. In
particular, don't complain if trying to send a H2G during a reset.
Whatever the H2G was about should get redone once the reset is over.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-17-matthew.brost@intel.com
The driver must provide GuC with a list of mmio registers
that should be saved/restored during a GuC-based engine reset.
Unfortunately, the list must be dynamically allocated as its size is
variable. That means the driver must generate the list twice - once to
work out the size and a second time to actually save it.
v2:
(Alan / CI)
- GEN7_GT_MODE -> GEN6_GT_MODE to fix WA selftest failure
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-16-matthew.brost@intel.com
The GuC can implement execution qunatums, detect hung contexts and
other such things but it requires the timer expired interrupt to do so.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-15-matthew.brost@intel.com
GuC will notify the driver, via G2H, if it fails to
reset an engine. We recover by resorting to a full GPU
reset.
v2:
(John Harrison):
- s/drm_dbg/drm_err
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Fernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-14-matthew.brost@intel.com
GuC will issue a reset on detecting an engine hang and will notify
the driver via a G2H message. The driver will service the notification
by resetting the guilty context to a simple state or banning it
completely.
v2:
(John Harrison)
- Move msg[0] lookup after length check
v3:
(John Harrison)
- s/drm_dbg/drm_err
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-13-matthew.brost@intel.com
The new GuC interface introduces an MMIO H2G command,
INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This
MMIO tears down any active contexts generating a context reset G2H CTB
for each. Once that step completes the GuC tears down the CTB
channels. It is safe to suspend once this MMIO H2G command completes
and all G2H CTBs have been processed. In practice the i915 will likely
never receive a G2H as suspend should only be called after the GPU is
idle.
Resume is implemented in the same manner as before - simply reload the
GuC firmware and reinitialize everything (e.g. CTB channels, contexts,
etc..).
v2:
(Michel / John H)
- INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-12-matthew.brost@intel.com
Add disable GuC interrupts to intel_guc_sanitize(). Part of this
requires moving the guc_*_interrupt wrapper function into header file
intel_guc.h.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-11-matthew.brost@intel.com
If submission is disabled by the backend for any reason, reset the GPU
immediately in the heartbeat code as the backend can't be reenabled
until the GPU is reset.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-10-matthew.brost@intel.com
Reset implementation for new GuC interface. This is the legacy reset
implementation which is called when the i915 owns the engine hang check.
Future patches will offload the engine hang check to GuC but we will
continue to maintain this legacy path as a fallback and this code path
is also required if the GuC dies.
With the new GuC interface it is not possible to reset individual
engines - it is only possible to reset the GPU entirely. This patch
forces an entire chip reset if any engine hangs.
v2:
(Michal)
- Check for -EPIPE rather than -EIO (CT deadlock/corrupt check)
v3:
(John H)
- Split into a series of smaller patches
v4:
(John H)
- Fix typo
- Add braces around if statements in reset code
v5:
(Checkpatch)
- Fix warnings
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com
Move active request tracking to a backend vfunc rather than assuming all
backends want to do this in the manner. In the of case execlists /
ring submission the tracking is on the physical engine while with GuC
submission it is on the context.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-8-matthew.brost@intel.com
With GuC virtual engines the physical engine which a request executes
and completes on isn't known to the i915. Therefore we can't attach a
request to a physical engines breadcrumbs. To work around this we create
a single breadcrumbs per engine class when using GuC submission and
direct all physical engine interrupts to this breadcrumbs.
v2:
(John H)
- Rework header file structure so intel_engine_mask_t can be in
intel_engine_types.h
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-6-matthew.brost@intel.com
Update the bonding extension to return -ENODEV when using GuC submission
as this extension fundamentally will not work with the GuC submission
interface.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-5-matthew.brost@intel.com
Hold a reference to the intel_context over life of an i915_request.
Without this an i915_request can exist after the context has been
destroyed (e.g. request retired, context closed, but user space holds a
reference to the request from an out fence). In the case of GuC
submission + virtual engine, the engine that the request references is
also destroyed which can trigger bad pointer dref in fence ops (e.g.
i915_fence_get_driver_name). We could likely change
i915_fence_get_driver_name to avoid touching the engine but let's just
be safe and hold the intel_context reference.
v2:
(John Harrison)
- Update comment explaining how GuC mode and execlists mode deal with
virtual engines differently
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-4-matthew.brost@intel.com
The serial number tracking of engines happens at the backend of
request submission and was expecting to only be given physical
engines. However, in GuC submission mode, the decomposition of virtual
to physical engines does not happen in i915. Instead, requests are
submitted to their virtual engine mask all the way through to the
hardware (i.e. to GuC). This would mean that the heart beat code
thinks the physical engines are idle due to the serial number not
incrementing. Which in turns means hangcheck does not work for
GuC virtual engines.
This patch updates the tracking to decompose virtual engines into
their physical constituents and tracks the request against each. This
is not entirely accurate as the GuC will only be issuing the request
to one physical engine. However, it is the best that i915 can do given
that it has no knowledge of the GuC's scheduling decisions.
Downside of this is that all physical engines constituting a GuC
virtual engine will be periodically unparked (even during just a single
context executing) in order to be pinged with a heartbeat request.
However the power and performance cost of this is not expected to be
measurable (due low frequency of heartbeat pulses) and it is considered
an easier option than trying to make changes to GuC firmware.
v2:
(Tvrtko)
- Update commit message
- Have default behavior if no vfunc present
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-3-matthew.brost@intel.com
Implement GuC virtual engines. Rather simple implementation, basically
just allocate an engine, setup context enter / exit function to virtual
engine specific functions, set all other variables / functions to guc
versions, and set the engine mask to that of all the siblings.
v2: Update to work with proto-ctx
v3:
(Daniele)
- Drop include, add comment to intel_virtual_engine_has_heartbeat
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-2-matthew.brost@intel.com
HDMI and DisplayPort sequences states that audio and PSR should be
disabled before planes are disabled.
Not following it did not caused any problems up to Alderlake-P but
for this platform it causes underruns during the PSR2 disable
sequence.
Specification don't mention that DRRS should be disabled before planes
but it looks safer to switch back to the default refresh rate before
following with the rest of the pipe disable sequence.
BSpec: 49191
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726181559.80855-1-jose.souza@intel.com
PSF GV points are an additional factor that can limit the
bandwidth available to display, separate from the traditional
QGV points. Whereas traditional QGV points represent possible
memory clock frequencies, PSF GV points reflect possible
frequencies of the memory fabric.
Switching between PSF GV points has the advantage of incurring
almost no memory access block time and thus does not need to be
accounted for in watermark calculations.
This patch adds support for those on top of regular QGV points.
Those are supposed to be used simultaneously, i.e we are always
at some QGV and some PSF GV point, based on the current video
mode requirements.
Bspec: 64631, 53998
v2: Seems that initial assumption made during ml conversation
was wrong, PCode rejects any masks containing points beyond
the ones returned, so even though BSpec says we have around
8 points theoretically, we can mask/unmask only those which
are returned, trying to manipulate those beyond causes a
failure from PCode. So switched back to generating mask
from 1 - num_qgv_points, where num_qgv_points is the actual
amount of points, advertised by PCode.
v3: - Extended restricted qgv point mask to 0xf, as we have now
3:2 bits for PSF GV points(Matt Roper)
- Replaced val2 with NULL from PCode request, since its not being
used(Matt Roper)
- Replaced %d to 0x%x for better readability(thanks for spotting)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210531064845.4389-2-stanislav.lisovskiy@intel.com
EHL and JSL add the 'Bypass LLC' MOCS entry, which should make it
possible for userspace to bypass the GTT caching bits set by the kernel,
as per the given object cache_level. This is troublesome since the heavy
flush we apply when first acquiring the pages is skipped if the kernel
thinks the object is coherent with the GPU. As a result it might be
possible to bypass the cache and read the contents of the page directly,
which could be stale data. If it's just a case of userspace shooting
themselves in the foot then so be it, but since i915 takes the stance of
always zeroing memory before handing it to userspace, we need to prevent
this.
v2: this time actually set cache_dirty in put_pages()
v3: move to get_pages() which looks simpler
BSpec: 34007
References: 046091758b ("Revert "drm/i915/ehl: Update MOCS table for EHL"")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Francisco Jerez <francisco.jerez.plata@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-2-matthew.auld@intel.com
Try to document the object caching related bits, like cache_coherent and
cache_dirty.
v2(Ville):
- As pointed out by Ville, fix the completely incorrect assumptions
about the "partial" coherency on shared LLC platforms.
v3(Daniel):
- Fix nonsense about "dirtying" the cache with reads.
v4(Daniel):
- Various improvements, including adding some more details for WT.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723105045.400841-1-matthew.auld@intel.com
The fast path only updates cursor register what will not cause
any updates in the screen when using PSR2 selective fetch.
The only option that we have is to go through the slow patch that will
do full atomic commit, that will trigger the PSR2 selective fetch
compute and programing calls.
Without this patch is possible to see a mouse movement lag in Gnome
when PSR2 selective fetch is enabled.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717011227.204494-3-jose.souza@intel.com
Without this planes that were added by intel_psr2_sel_fetch_update()
that intersect with pipe damaged area will not
have skl_program_plane() and intel_psr2_program_plane_sel_fetch()
called, causing panel to not be properly updated.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717011227.204494-2-jose.souza@intel.com
Until we support p2p dma or as a complement to that, migrate data
to system memory at dma-buf attach time if possible.
v2:
- Rebase on dynamic exporter. Update the igt_dmabuf_import_same_driver
selftest to migrate if we are LMEM capable.
v3:
- Migrate also in the pin() callback.
v4:
- Migrate in attach
v5: (jason)
- Lock around the migration
v6: (jason)
- Move the can_migrate check outside the lock
- Rework the selftests to test more migration conditions. In
particular, SMEM, LMEM, and LMEM+SMEM are all checked.
v7: (mauld)
- Misc style nits
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-9-jason@jlekstrand.net
If our exported dma-bufs are imported by another instance of our driver,
that instance will typically have the imported dma-bufs locked during
dma_buf_map_attachment(). But the exporter also locks the same reservation
object in the map_dma_buf() callback, which leads to recursive locking.
So taking the lock inside _pin_pages_unlocked() is incorrect.
Additionally, the current pinning code path is contrary to the defined
way that pinning should occur.
Remove the explicit pin/unpin from the map/umap functions and move them
to the attach/detach allowing correct locking to occur, and to match
the static dma-buf drm_prime pattern.
Add a live selftest to exercise both dynamic and non-dynamic
exports.
v2:
- Extend the selftest with a fake dynamic importer.
- Provide real pin and unpin callbacks to not abuse the interface.
v3: (ruhl)
- Remove the dynamic export support and move the pinning into the
attach/detach path.
v4: (ruhl)
- Put pages does not need to assert on the dma-resv
v5: (jason)
- Lock around dma_buf_unmap_attachment() when emulating a dynamic
importer in the subtests.
- Use pin_pages_unlocked
v6: (jason)
- Use dma_buf_attach instead of dma_buf_attach_dynamic in the selftests
v7: (mauld)
- Use __i915_gem_object_get_pages (2 __underscores) instead of the
4 ____underscore version in the selftests
v8: (mauld)
- Drop the kernel doc from the static i915_gem_dmabuf_attach function
- Add missing "err = PTR_ERR()" to a bunch of selftest error cases
Reported-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-8-jason@jlekstrand.net
Without TTM, we have no such hook so we exit early but this is fine
because we use TTM on all LMEM platforms and, on integrated platforms,
there is no real migration. If we do have the hook, it's better to just
let TTM handle the migration because it knows where things are actually
placed.
This fixes a bug where i915_gem_object_migrate fails to migrate newly
created LMEM objects. In that scenario, the object has obj->mm.region
set to LMEM but TTM has it in SMEM because that's where all new objects
are placed there prior to getting actual pages. When we invoke
i915_gem_object_migrate, it exits early because, from the point of view
of the GEM object, it's already in LMEM and no migration is needed.
Then, when we try to pin the pages, __i915_ttm_get_pages is called
which, unaware of our failed attempt at a migration, places the object
in SMEM. This only happens on newly created objects because they have
this weird state where TTM thinks they're in SMEM, GEM thinks they're in
LMEM, and the reality is that they don't exist at all.
It's better if GEM just always calls into TTM and let's TTM handle
things. That way the lies stay better contained. Once the migration is
complete, the object will have pages, obj->mm.region will be correct,
and we're done lying.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-7-jason@jlekstrand.net
__i915_ttm_get_pages does two things. First, it calls ttm_bo_validate()
to check the given placement and migrate the BO if needed. Then, it
updates the GEM object to match, in case the object was migrated. If
no migration occured, however, we might still have pages on the GEM
object in which case we don't need to fetch them from TTM and call
__i915_gem_object_set_pages. This hasn't been a problem before because
the primary user of __i915_ttm_get_pages is __i915_gem_object_get_pages
which only calls it if the GEM object doesn't have pages.
However, i915_ttm_migrate also uses __i915_ttm_get_pages to do the
migration so this meant it was unsafe to call on an already populated
object. This patch checks i915_gem_object_has_pages() before trying to
__i915_gem_object_set_pages so i915_ttm_migrate is safe to call, even on
populated objects.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-6-jason@jlekstrand.net
Instead of hand-rolling the same three calls in each function, pull them
into an i915_gem_object_create_user helper. Apart from re-ordering of
the placements array ENOMEM check, there should be no functional change.
v2 (Matthew Auld):
- Add the call to i915_gem_flush_free_objects() from
i915_gem_dumb_create() in a separate patch
- Move i915_gem_object_alloc() below the simple error checks
v3 (Matthew Auld):
- Add __ to i915_gem_object_create_user and kerneldoc which warns the
caller that it's not validating anything.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-5-jason@jlekstrand.net
This doesn't really fix anything serious since the chances of a client
creating and destroying a mass of dumb BOs is pretty low. However, it
is called by the other two create IOCTLs to garbage collect old objects.
Call it here too for consistency.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-4-jason@jlekstrand.net
Since we don't allow changing the set of regions after creation, we can
make ext_set_placements() build up the region set directly in the
create_ext and assign it to the object later. This is similar to what
we did for contexts with the proto-context only simpler because there's
no funny object shuffling. This will be used in the next patch to allow
us to de-duplicate a bunch of code. Also, since we know the maximum
number of regions up-front, we can use a fixed-size temporary array for
the regions. This simplifies memory management a bit for this new
delayed approach.
v2 (Matthew Auld):
- Get rid of MAX_N_PLACEMENTS
- Drop kfree(placements) from set_placements()
v3 (Matthew Auld):
- Properly set ext_data->n_placements
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-3-jason@jlekstrand.net
We don't roll them together entirely because there are still a couple
cases where we want a separate can_migrate check. For instance, the
display code checks that you can migrate a buffer to LMEM before it
accepts it in fb_create. The dma-buf import code also uses it to do an
early check and return a different error code if someone tries to attach
a LMEM-only dma-buf to another driver.
However, no one actually wants to call object_migrate when can_migrate
has failed. The stated intention is for self-tests but none of those
actually take advantage of this unsafe migration.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723172142.3273510-2-jason@jlekstrand.net
This is only used by GRAPHICS_VER == 6 and GRAPHICS_VER == 7. All other
recent platforms do not depend on this field, so it doesn't make much
sense to keep it generic like that. Instead, just do a mapping from
engine class to HW ID in the single place that is needed.
v2: use macros with the direct register address instead of calculating
from the legacy HW_ID (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723002551.3906535-1-lucas.demarchi@intel.com
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
(cherry picked from commit ec387b8ff8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we
were not handling GLK correctly since that has GRAPHICS_VER == 9, but
DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER
which makes it more in line with Bspec.
Even though the Bspec has an exception for RKL in
TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has
disable semantic and RKL doesn't have pipe D.
Bspec: 50075, 7548
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723234352.214459-1-lucas.demarchi@intel.com
(cherry picked from commit 4fd177288a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
PORT_A to PORT_F are regular integers defined in the enum port,
while for_each_port_masked requires a bit mask for the ports.
Current given mask: 0b111
Desired mask: 0b111111
I noticed this while Christoph was reporting a bug found on headless
GVT configuration which bisect blamed commit 3ae04c0c7e ("drm/i915/bios:
limit default outputs to ports A through F")
v2: Avoid unnecessary line continuations as pointed by CI and Christoph
Cc: Christoph Hellwig <hch@infradead.org>
Fixes: 3ae04c0c7e ("drm/i915/bios: limit default outputs to ports A through F")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Christoph Hellwig <hch@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723095225.562913-1-rodrigo.vivi@intel.com
(cherry picked from commit 9b52aa7201)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmD95yIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGqp0H/j/xHL20EHaUJOaV
iJjnfGyjtnkLC5FCoV/q/v9sFuSW2p4W1nyF8/eIgVKObef94Mg4/xxaHQrWIM56
cbzK9aIcD9InAuImJ6lju4fqjNmFrt2x7mhfzjPKqmhfINfZ5CohpLFN5XdOwzYC
l+ZgmUUl7GLDAND2M6rtkc7AOk4qTyAySDvvPFELE/uNgV4EKaENSIWofHhEzW5v
Yk+4agawaFTfa6H9+uMVYZBOcEKwheQ0E2tcOJvHJT8Mwm8MFoC/B7fLY5zxIdN2
7A7r/7qbSQmSDSjOgwKS4ZOjom0xGSD+V+596SzET6jkbahR2HJ/mrFvmD7GNEoW
OWJPjzI=
=vzIM
-----END PGP SIGNATURE-----
Backmerge tag 'v5.14-rc3' into drm-next
Linux 5.14-rc3
Daniel said we should pull the nouveau fix from fixes in here, probably
a good plan.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210722232922.3796835-1-lucas.demarchi@intel.com
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we
were not handling GLK correctly since that has GRAPHICS_VER == 9, but
DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER
which makes it more in line with Bspec.
Even though the Bspec has an exception for RKL in
TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has
disable semantic and RKL doesn't have pipe D.
Bspec: 50075, 7548
Fixes: 2b5a4562ed ("drm/i915/display: Simplify GLK display version tests")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723234352.214459-1-lucas.demarchi@intel.com
Implement Xe_HP forcewake handling. While we're at it, let's reorder to
the forcewake assignment if/else ladder to match our usual driver
conventions.
Co-authored-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-6-matthew.d.roper@intel.com
Xe_HP can have a lot of extra media engines. This patch adds the reset
support for them.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-5-matthew.d.roper@intel.com
Xe_HP can have a lot of extra media engines. This patch adds the
interrupt handler support for them.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723174239.1551352-4-matthew.d.roper@intel.com
Xe_HP can have a lot of extra media engines. This patch adds the basic
definitions for them.
v2:
- Re-order intel_gt_info and intel_device_info slightly to avoid
unnecessary padding now that we've increased the size of
intel_engine_mask_t. (Tvrtko)
v3:
- Drop the .hw_id assignments. (Lucas)
v4:
- Fix graphics_ver typo for VCS4 (should be 12, not 11). (Lucas)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723191024.1553405-1-matthew.d.roper@intel.com
A new step has been added to the DP modeset sequences for all platforms
with display version 12 and beyond: if enabling DP MST with FEC, we
need to set a chicken bit before enabling the transcoder. The chicken
bit should be disabled again before disabling the transcoder (which we
can do unconditionally since it shouldn't be set anyway in non-MST
cases).
Bspec: 49190, 54128, 55424
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723170618.1477415-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
PORT_A to PORT_F are regular integers defined in the enum port,
while for_each_port_masked requires a bit mask for the ports.
Current given mask: 0b111
Desired mask: 0b111111
I noticed this while Christoph was reporting a bug found on headless
GVT configuration which bisect blamed commit 3ae04c0c7e ("drm/i915/bios:
limit default outputs to ports A through F")
v2: Avoid unnecessary line continuations as pointed by CI and Christoph
Cc: Christoph Hellwig <hch@infradead.org>
Fixes: 3ae04c0c7e ("drm/i915/bios: limit default outputs to ports A through F")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Christoph Hellwig <hch@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723095225.562913-1-rodrigo.vivi@intel.com
PSR2 is not supported on DG2.
Cc: Caz Yokoyama <Caz.Yokoyama@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-49-matthew.d.roper@intel.com
Although the bspec labels four of DG2's outputs as "combo PHY," the
underlying PHYs in both cases are actually Synopsys PHYs that are
programmed completely differently than the traditional Intel "combo" PHY
units. As such, we don't want intel_phy_is_combo to take us down legacy
programming paths, so just return false from it on DG2. Instead add a
new intel_phy_is_snps() that will return true for all DG2 PHYs.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-46-matthew.d.roper@intel.com
Since we can't steer multicast register reads during ring-based
workaround verification, we need to define the multicast ranges where
failure to steer could potentially cause us to read back from a
fused-off register instance.
As with gen12, we can ignore the multicast ranges that the bspec
describes as 'SQIDI' since all instances of those registers will always
be present and we'll always be able to read back a workaround value that
was written with multicast.
Bspec: 66534
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714031540.3539704-11-matthew.d.roper@intel.com
The CPU domain should be static for discrete, and on DG1 we don't need
any flushing since everything is already coherent, so really all this
does is an object wait, for which we have an ioctl. Longer term the
desired caching should be an immutable creation time property for the
BO, which can be set with something like gem_create_ext.
One other user is iris + userptr, which uses the set_domain to probe all
the pages to check if the GUP succeeds, however we now have a PROBE
flag for this purpose.
v2: add some more kernel doc, also add the implicit rules with caching
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-5-matthew.auld@intel.com
On Xe_HP the fusing register is renamed and changed to have the "enable"
semantics, but otherwise remains compatible (mmio address, bitmask
ranges) with older platforms.
To simplify things we do not add a new register definition but just stop
inverting the fusing masks before processing them.
Bspec: 52615
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-6-matthew.d.roper@intel.com
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
-----BEGIN PGP SIGNATURE-----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=BUya
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15-rc1:
UAPI Changes:
- Remove sysfs stats for dma-buf attachments, as it causes a performance regression.
Previous merge is not in a rc kernel yet, so no userspace regression possible.
Cross-subsystem Changes:
- Sanitize user input in kyro's viewport ioctl.
- Use refcount_t in fb_info->count
- Assorted fixes to dma-buf.
- Extend x86 efifb handling to all archs.
- Fix neofb divide by 0.
- Document corpro,gm7123 bridge dt bindings.
Core Changes:
- Slightly rework drm master handling.
- Cleanup vgaarb handling.
- Assorted fixes.
Driver Changes:
- Add support for ws2401 panel.
- Assorted fixes to stm, ast, bochs.
- Demidlayer ingenic irq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
We kept adding new engines and for that increasing hw_id unnecessarily:
it's not used since GRAPHICS_VER == 8. Prepend "gen6" to the field and
try to pack it in the structs to give a hint this field is actually not
used in recent platforms.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-4-lucas.demarchi@intel.com
The engine hw_id is only used by RING_FAULT_REG(), which is not used
by GRAPHICS_VER >= 8. We did use hw_id on recent platforms to set
the engine's guc_id, but that is not the case anymore since
commit c784e5249e ("drm/i915/guc: Update to use firmware v49.0.1"):
now we only use class and id information to generate guc_id.
We tend to keep adding new defines just to be consistent, but let's try
to remove them and let them defined to 0 for engines that only exist on
gen8+ platforms.
v2: Reword commit message and add information about when we stopped
using hw_id (Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-3-lucas.demarchi@intel.com
gen8_clear_engine_error_register() is actually not used by
GRAPHICS_VER >= 8, since for those we are using another register that is
not engine-dependent. Fix the platform prefix, to make clear we are not
using any GEN6_RING_FAULT_REG_* one GRAPHICS_VER >= 8.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720232014.3302645-2-lucas.demarchi@intel.com
Lets use RUNTIME_INFO->step since all platforms now have their
stepping info in intel_step.c. This makes intel_get_stepping_info()
a lot simpler.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215238.24980-2-anusha.srivatsa@intel.com
With the addition of stepping info for
all platforms, lets use macros for handling them
and autogenerating code for all steps at a time.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215238.24980-1-anusha.srivatsa@intel.com
Add intel_context tracing. These trace points are particular helpful
when debugging the GuC firmware and can be enabled via
CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS kernel config option.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-19-matthew.brost@intel.com
Add trace point for GuC submit. Extended existing request trace points
to include submit fence value,, guc_id, and ring tail value.
v2: Fix white space alignment in i915_request_add trace point
v3: Delete dep_from , dep_to (Tvrtko)
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-18-matthew.brost@intel.com
Update GuC debugfs to support the new GuC structures.
v2:
(John Harrison)
- Remove intel_lrc_reg.h include from i915_debugfs.c
(Michal)
- Rename GuC debugfs functions
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-17-matthew.brost@intel.com
When running the GuC the GPU can't be considered idle if the GuC still
has contexts pinned. As such, a call has been added in
intel_gt_wait_for_idle to idle the UC and in turn the GuC by waiting for
the number of unpinned contexts to go to zero.
v2: rtimeout -> remaining_timeout
v3: Drop unnecessary includes, guc_submission_busy_loop ->
guc_submission_send_busy_loop, drop negatie timeout trick, move a
refactor of guc_context_unpin to earlier path (John H)
v4: Add stddef.h back into intel_gt_requests.h, sort circuit idle
function if not in GuC submission mode
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-16-matthew.brost@intel.com
Ensure G2H response has space in the buffer before sending H2G CTB as
the GuC can't handle any backpressure on the G2H interface.
v2:
(Matthew)
- s/INTEL_GUC_SEND/INTEL_GUC_CT_SEND
v3:
(Matthew)
- Add G2H credit accounting to blocking path, add g2h_release_space
helper
(John H)
- CTB_G2H_BUFFER_SIZE / 4 == G2H_ROOM_BUFFER_SIZE
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-15-matthew.brost@intel.com
Semaphores are an optimization and not required for basic GuC submission
to work properly. Disable until we have time to do the implementation to
enable semaphores and tune them for performance. Also long direction is
just to delete semaphores from the i915 so another reason to not enable
these for GuC submission.
This patch fixes an existing bugs where I915_ENGINE_HAS_SEMAPHORES was
not honored correctly.
v2: Reword commit message
v3:
(John H)
- Add text to commit indicating this also fixing an existing bug
v4:
(John H)
- s/bug/bugs
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-14-matthew.brost@intel.com
If two requests are on the same ring, they are explicitly ordered by the
HW. So, a submission fence is sufficient to ensure ordering when using
the new GuC submission interface. Conversely, if two requests share a
timeline and are on the same physical engine but different context this
doesn't ensure ordering on the new GuC submission interface. So, a
completion fence needs to be used to ensure ordering.
v2:
(Daniele)
- Don't delete spin lock
v3:
(Daniele)
- Delete forward dec
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-13-matthew.brost@intel.com
Disable preempt busywait when using GuC scheduling. This isn't needed as
the GuC controls preemption when scheduling.
v2:
(John H):
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-12-matthew.brost@intel.com
Extend the deregistration context fence to fence whne a GuC context has
scheduling disable pending.
v2:
(John H)
- Update comment why we check the pin count within spin lock
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-11-matthew.brost@intel.com
Disable engine barriers for unpinning with GuC. This feature isn't
needed with the GuC as it disables context scheduling before unpinning
which guarantees the HW will not reference the context. Hence it is
not necessary to defer unpinning until a kernel context request
completes on each engine in the context engine mask.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-10-matthew.brost@intel.com
With GuC scheduling, it isn't safe to unpin a context while scheduling
is enabled for that context as the GuC may touch some of the pinned
state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is
done, a call back is added to intel_context_unpin when pin count == 1
to disable scheduling for that context. When the response CTB is
received it is safe to do the final unpin.
Future patches may add a heuristic / delay to schedule the disable
call back to avoid thrashing on schedule enable / disable.
v2:
(John H)
- s/drm_dbg/drm_err
(Daneiel)
- Clean up sched state function
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-9-matthew.brost@intel.com
Sometimes during context pinning a context with the same guc_id is
registered with the GuC. In this a case deregister must be done before
the context can be registered. A fence is inserted on all requests while
the deregister is in flight. Once the G2H is received indicating the
deregistration is complete the context is registered and the fence is
released.
v2:
(John H)
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <john.c.harrison@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-8-matthew.brost@intel.com
Implement GuC context operations which includes GuC specific operations
alloc, pin, unpin, and destroy.
v2:
(Daniel Vetter)
- Use msleep_interruptible rather than cond_resched in busy loop
(Michal)
- Remove C++ style comment
v3:
(Matthew Brost)
- Drop GUC_ID_START
(John Harrison)
- Fix a bunch of typos
- Use drm_err rather than drm_dbg for G2H errors
(Daniele)
- Fix ;; typo
- Clean up sched state functions
- Add lockdep for guc_id functions
- Don't call __release_guc_id when guc_id is invalid
- Use MISSING_CASE
- Add comment in guc_context_pin
- Use shorter path to rpm
(Daniele / CI)
- Don't call release_guc_id on an invalid guc_id in destroy
v4:
(Daniel Vetter)
- Add FIXME comment
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-7-matthew.brost@intel.com
Implement GuC submission tasklet for new interface. The new GuC
interface uses H2G to submit contexts to the GuC. Since H2G use a single
channel, a single tasklet is used for the submission path.
Also the per engine interrupt handler has been updated to disable the
rescheduling of the physical engine tasklet, when using GuC scheduling,
as the physical engine tasklet is no longer used.
In this patch the field, guc_id, has been added to intel_context and is
not assigned. Patches later in the series will assign this value.
v2:
(John Harrison)
- Clean up some comments
v3:
(John Harrison)
- More comment cleanups
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-5-matthew.brost@intel.com
Add LRC descriptor context lookup array which can resolve the
intel_context from the LRC descriptor index. In addition to lookup, it
can determine if the LRC descriptor context is currently registered with
the GuC by checking if an entry for a descriptor index is present.
Future patches in the series will make use of this array.
v2:
(Michal)
- "linux/xarray.h" -> <linux/xarray.h>
- s/lrc/LRC
(John H)
- Fix commit message
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-4-matthew.brost@intel.com
Remove old GuC stage descriptor, add LRC descriptor which will be used
by the new GuC interface implemented in this patch series.
v2:
(John Harrison)
- s/lrc/LRC/g
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-3-matthew.brost@intel.com
Add new GuC interface defines and structures while maintaining old ones
in parallel.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-2-matthew.brost@intel.com
The layout of some engine contexts has changed on Xe_HP. Define the new
offsets.
Bspec: 45585, 46256
Signed-off-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-10-matthew.d.roper@intel.com
Xe_HP changes the format of the context ID from past platforms.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-9-matthew.d.roper@intel.com
Increasing the engine count causes a couple of local array variables
to exceed the kernel stack limit. So make them dynamic allocations
instead.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-8-matthew.d.roper@intel.com
In Gen12 there are various fuse combinations and in each configuration
vdbox engine may be connected to SFC depending on which engines are
available, so we need to set the SFC capability based on fuse value from
the hardware. Even numbered physical instance always have SFC, odd
numbered physical instances have SFC only if previous even instance is
fused off.
v2:
- Minor style & typo fixes (Tvrtko)
- Drop an unwanted 'inline' (Tvrtko)
Bspec: 48028
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-7-matthew.d.roper@intel.com
As we begin applying XeHP and DG2 patches, the basic platform
definitions and macros (like IS_DG2()) will be needed in both
drm-intel-next and drm-intel-gt-next. Those initial definition patches
are applied to a topic branch and merged to both trees.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
DG2 doesn't have a SAGV or QGV points that determine memory bandwidth.
Instead it has a constant amount of memory bandwidth available to
display that does not need to be reduced based on the number of active
planes.
For simplicity, we'll just modify driver initialization to create a
single dummy QGV point with the proper amount of memory bandwidth,
rather than trying to query the pcode for this information.
Bspec: 64631
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-19-matthew.d.roper@intel.com
DG2 does not use system DRAM information for BW_BUDDY programming or
watermark workarounds, so there's no need to read this out at startup.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-18-matthew.d.roper@intel.com
DG2 extends our DDB to four DBuf slices; pipes A+B only have access to
the first two slices, whereas pipes C+D only have access to the second
two.
Confusingly, our bspec decided to switch from 1-based numbering
of dbuf slices (S1, S2) to 0-based numbering (S0, S1, S2, S3) in
Display13. At the moment we're using the 0-based number scheme for the
DBUF_CTL_S() register addressing, but the 1-based number scheme in the
actual slice assignment tables. We may want to consider switching the
assignment over to 0-based numbering too at some point...
Bspec: 49255
Bspec: 50057
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-16-matthew.d.roper@intel.com
DG2 has outputs on DDI A-D attached to what the bspec diagram shows as
"Combo PHY A-D." Note that despite being labelled "combo" the PHYs on
these outputs are Synopsys PHYs rather than traditional Intel combo PHY
technology.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-15-matthew.d.roper@intel.com
Note that DG2 only has a single possible refclk frequency (38.4 MHz).
v2:
- Drop two now-unused cdclk entries
Bspec: 54034
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-12-matthew.d.roper@intel.com
As with DG1, DG2 has an ICL-style south display interface provided on
the same PCI device. Add a fake PCH to ensure DG2 takes the appropriate
codepaths for south display handling.
Bspec: 54871, 50062, 49961, 53673
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-11-matthew.d.roper@intel.com
The current interrupt handler is getting increasingly complicated and
Xe_HP changes will bring even more complexity. Let's split off a new
interrupt handler starting with DG1 (i.e., when the master tile
interrupt register was added to the design) and use that as the basis
for the new Xe_HP changes.
Now that we track the hardware IP's release number as well as the
version number, we can also properly define DG1 has version "12.10" and
replace the has_master_unit_irq feature flag with an IP version test.
Bspec: 50875
Cc: Daniele Spurio Ceraolo <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-5-matthew.d.roper@intel.com
As we begin applying XeHP and DG2 patches, the basic platform
definitions and macros (like IS_DG2()) will be needed in both
drm-intel-next and drm-intel-gt-next. Those initial definition patches
are applied to a topic branch and merged to both trees.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics.
There are two variants (treated as subplatforms in the code): DG2-G10
and DG2-G11 that require independent programming in some areas (e.g.,
workarounds).
Bspec: 44472, 44474, 46197, 48028, 48077
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-4-matthew.d.roper@intel.com
XeHP SDV is a Intel® dGPU without display. This is just the definition
of some basic platform macros, by large a copy of current state of
Tigerlake which does not reflect the end state of this platform.
v2:
- Switch to intel_step infrastructure for stepping matches. (Jani)
v3:
- Bring earlier in patch series and leave addition of new media engines
to the engine mask for a later patch.
Bspec: 44467, 48077
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-3-matthew.d.roper@intel.com
Our _FEATURES macro went back to GEN7, extending each other, making it
difficult to grasp what was really enabled/disabled. Take the
opportunity of the GEN -> XE_HP name break and also break with the
feature inheritance.
For XE_HP this basically goes from GEN12 back to GEN7 coalescing the
features making sure the overrides remain, remove all the
display-specific features and sort it.
Then also remove the definitions that would be overridden by
DGFX_FEATURES and those that were 0 (since that is the default).
Exception here is has_master_unit_irq: although it is a feature that
started with DG1 and is true for all DGFX platforms, it's also true for
XE_HP in general.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-2-matthew.d.roper@intel.com
Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.
The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register. For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.
After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this
This is a mix of 2 independent changes: one by me and the other by Matt
Roper.
v2:
- Reword commit message to make it clearer why we don't call it
"minor" (Matt Roper and Tvrtko)
- Rename variables s/*_ver_release/*_rel/ and print them in a single
line formatted as {ver}.{rel:2} (Jani and Matt Roper)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com
(cherry picked from commit ca6374e267)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Brevity is not needed here, so just spell out "* version" in the string.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-1-lucas.demarchi@intel.com
(cherry picked from commit 0f9b145a0a)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
There's no reason that I can tell why this should be per-i915_buddy_mm
and doing so causes KMEM_CACHE to throw dmesg warnings because it tries
to create a debugfs entry with the name i915_buddy_block multiple times.
We could handle this by carefully giving each slab its own name but that
brings its own pain because then we have to store that string somewhere
and manage the lifetimes of the different slabs. The most likely
outcome would be a global atomic which we increment to get a new name or
something like that.
The much easier solution is to use the i915_globals system like we do
for every other slab in i915. This ensures that we have exactly one of
them for each i915 driver load and it gets neatly created on module load
and destroyed on module unload. Using the globals system also means
that its now tied into the shrink handler so we can properly respond to
low-memory situations.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 88be9a0a06 ("drm/i915/ttm: add ttm_buddy_man")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
[danvet: Rebase against removal of global shrink code]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-7-jason@jlekstrand.net
If the driver was not fully loaded, we may still have globals lying
around. If we don't tear those down in i915_exit(), we'll leak a bunch
of memory slabs. This can happen two ways: use_kms = false and if we've
run mock selftests. In either case, we have an early exit from
i915_init which happens after i915_globals_init() and we need to clean
up those globals.
The mock selftests case is especially sticky. The load isn't entirely
a no-op. We actually do quite a bit inside those selftests including
allocating a bunch of mock objects and running tests on them. Once all
those tests are complete, we exit early from i915_init(). Perviously,
i915_init() would return a non-zero error code on failure and a zero
error code on success. In the success case, we would get to i915_exit()
and check i915_pci_driver.driver.owner to detect if i915_init exited early
and do nothing. In the failure case, we would fail i915_init() but
there would be no opportunity to clean up globals.
The most annoying part is that you don't actually notice the failure as
part of the self-tests since leaking a bit of memory, while bad, doesn't
result in anything observable from userspace. Instead, the next time we
load the driver (usually for next IGT test), i915_globals_init() gets
invoked again, we go to allocate a bunch of new memory slabs, those
implicitly create debugfs entries, and debugfs warns that we're trying
to create directories and files that already exist. Since this all
happens as part of the next driver load, it shows up in the dmesg-warn
of whatever IGT test ran after the mock selftests.
While the obvious thing to do here might be to call i915_globals_exit()
after selftests, that's not actually safe. The dma-buf selftests call
i915_gem_prime_export which creates a file. We call dma_buf_put() on
the resulting dmabuf which calls fput() on the file. However, fput()
isn't immediate and gets flushed right before syscall returns. This
means that all the fput()s from the selftests don't happen until right
before the module load syscall used to fire off the selftests returns
which is after i915_init(). If we call i915_globals_exit() in
i915_init() after selftests, we end up freeing slabs out from under
objects which won't get released until fput() is flushed at the end of
the module load syscall.
The solution here is to let i915_init() return success early and detect
the early success in i915_exit() and only tear down globals and nothing
else. This way the module loads successfully, regardless of the success
or failure of the tests. Because we've not enumerated any PCI devices,
no device nodes are created and it's entirely useless from userspace.
The only thing the module does at that point is hold on to a bit of
memory until we unload it and i915_exit() is called. Importantly, this
means that everything from our selftests has the ability to properly
flush out between i915_init() and i915_exit() because there is at least
one syscall boundary in between.
In order to handle all the delicate init/exit cases, we convert the
whole thing to a table of init/exit pairs and track the init status in
the new init_progress global. This allows us to ensure that i915_exit()
always tears down exactly the things that i915_init() successfully
initialized. We also allow early-exit of i915_init() without failure by
an init function returning > 0. This is useful for nomodeset, and
selftests. For the mock selftests, we convert them to always return 1
so we get the desired behavior of the driver always succeeding to load
the driver and then properly tearing down the partially loaded driver.
v2 (Tvrtko Ursulin):
- Guard init_funcs[i].exit with GEM_BUG_ON(i >= ARRAY_SIZE(init_funcs))
v2 (Daniel Vetter):
- Update the docstring for i915.mock_selftests
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-4-jason@jlekstrand.net
In the unlikely event that pci_register_device() fails, we were tearing
down our PMU setup but not globals. This leaves a bunch of memory slabs
lying around.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 32eb6bcfdd ("drm/i915: Make request allocation caches global")
[danvet: Fix conflicts against removal of the globals_flush
infrastructure.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-3-jason@jlekstrand.net
We should tear down in the opposite order we set up.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721152358.2893314-2-jason@jlekstrand.net
This essentially reverts
commit 84a1074920
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jan 24 11:36:08 2018 +0000
drm/i915: Shrink the GEM kmem_caches upon idling
mm/vmscan.c:do_shrink_slab() is a thing, if there's an issue with it
then we need to fix that there, not hand-roll our own slab shrinking
code in i915.
Also when this was added there was only one other caller of
kmem_cache_shrink (added 2005 to the acpi code). Now there's a 2nd one
outside of i915 code in a kunit test, which seems legit since that
wants to very carefully control what's in the kmem_cache. This out of
a total of over 500 calls to kmem_cache_create. This alone should have
been warning sign enough that we're doing something silly.
Noticed while reviewing a patch set from Jason to fix up some issues
in our i915_init() and i915_exit() module load/cleanup code. Now that
i915_globals.c isn't any different than normal init/exit functions, we
should convert them over to one unified table and remove
i915_globals.[hc] entirely.
v2: Improve commit message (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721183229.4136488-1-daniel.vetter@ffwll.ch
Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround). This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.
Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does. This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code. If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.
We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds. But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.
[mattrope: Split out display changes to apply through intel-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com
Workarounds are documented in the bspec with an exclusive upper bound
(i.e., a "fixed" stepping that no longer needs the workaround). This
makes our driver's use of an inclusive upper bound for stepping ranges
confusing; the differing notation between code and bspec makes it very
easy for mistakes to creep in.
Let's switch the upper bound of our IS_{GT,DISP}_STEP macros over to use
an exclusive upper bound like the bspec does. This also has the benefit
of helping make sure workarounds are properly handled for new minor
steppings that show up (e.g., an A1 between the A0 and B0 we already
knew about) --- if the new intermediate stepping pulls in hardware fixes
early, there will be an update to the workaround definition which lets
us know we need to change our code. If the new stepping does not pull a
hardware fix earlier, then the new stepping will already be captured
properly by the "[begin, fix)" range in the code.
We'll probably need to be extra vigilant in code review of new
workarounds for the near future to make sure developers notice the new
semantics of workaround bounds. But we just migrated a bunch of our
platforms from the IS_REVID bounds over to IS_{GT,DISP}_STEP, so people
are already adjusting to the new macros and now is a good time to make
this change too.
[mattrope: Split out GT changes to apply through gt-next tree]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-8-matthew.d.roper@intel.com
DFR programming (which we enable as an optimization on gen11, but must
ensure is disabled on gen12) should be handled as a GT workaround rather
than clock gating initialization. This will ensure that the programming
of these registers is verified with our typical workaround checks.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-4-matthew.d.roper@intel.com
While doing a quick sanity check of the ICL workarounds in the driver I
noticed a few things that should be updated:
* There's no mention in the bspec that WaPipelineFlushCoherentLines
is needed on gen11 (both the current WA database and the old,
deprecated page 20196 were checked); it appears this might have just
been copied from the gen9 list? Even if this were needed, it doesn't
seem like this was the correct implementation anyway since the gen9
workaround is supposed to be implemented in the indirect context bb
(as we do in gen8_emit_flush_coherentl3_wa() on gen8/gen9).
* WaForwardProgressSoftReset does not appear in the current workaround
database. The old deprecated workaround list has a note indicating
the workaround was dropped in 2017, so we should be safe to drop it
from the code too.
While we're at it, add the formal workaround ID number to
WaDisableBankHangMode (our hardware team made a transition from
text-based workaround names to ID numbers partway through the
development of ICL, which is why some workarounds only have names, some
only have numbers, and some have both).
Bspec: 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-3-matthew.d.roper@intel.com
On SKL we've been applying this workaround on H0+ steppings, which is
actually backwards; H0 is supposed to be the first stepping where the
workaround is no longer needed. Flip the bounds so that the workaround
applies to all steppings _before_ H0.
On BXT we've been applying this workaround to all steppings, but the
bspec tells us it's only needed until C0. Pre-C0 GT steppings only
appeared in pre-production hardware, which we no longer support in the
driver, so we can drop the workaround completely for this platform.
On ICL we've been applying this workaround to all steppings, but there
doesn't seem to be any indication that this workaround was ever needed
for this platform (even now-deprecated page 20196 of the bspec doesn't
mention it). We can go ahead and drop it.
I also don't see any mention of this workaround being needed for KBL,
although this may be an oversight since the workaround is needed for all
steppings of CFL. I'll leave the workaround in place for KBL to be
safe.
Bspec: 14091, 33450
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210717051426.4120328-2-matthew.d.roper@intel.com
The FIXED mapping is only used for ttm, and tells userspace that the
mapping type is pre-defined. This disables the other type of mmap
offsets when discrete memory is used, so fix the selftests as well.
Document the struct as well, so it shows up in docbook.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mauld: Included minor fixes from the review comments]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714122833.766586-1-maarten.lankhorst@linux.intel.com
In 93b7133041 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.
Fixes: c9d9fdbc10 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"")
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]
(cherry picked from commit 15eb083bdb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Updated Fixes tag to match fixes branch]
In 93b7133041 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.
Fixes: 93b7133041 ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"")
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]
The VGA arbitration is entirely based on pci_dev structures, so just pass
that back to the set_vga_decode callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-8-hch@lst.de
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
All callers pass NULL as the irq_set_state argument, so remove it and
the ->irq_set_state member in struct vga_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-7-hch@lst.de
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
-----BEGIN PGP SIGNATURE-----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=x8Eo
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
- udmabuf: Add support for mapping hugepages
- Add dma-buf stats to sysfs.
- Assorted fixes to fbdev/omap2.
- dma-buf: Document DMA_BUF_IOCTL_SYNC
- Improve dma-buf non-dynamic exporter expectations better.
- Add module parameters for dma-buf size and list limit.
- Add HDMI codec support to vc4, to replace vc4's own codec.
- Document dma-buf implicit fencing rules.
- dma_resv_test_signaled test_all handling.
Core Changes:
- Extract i915's eDP backlight code into DRM helpers.
- Assorted docbook updates.
- Rework drm_dp_aux documentation.
- Add support for the DP aux bus.
- Shrink dma-fence-chain slightly.
- Add alloc/free helpers for dma-fence-chain.
- Assorted fixes to TTM., drm/of, bridge
- drm_gem_plane_helper_prepare/cleanup_fb is now the default for gem drivers.
- Small fix for scheduler completion.
- Remove use of drm_device.irq_enabled.
- Print the driver name to dmesg when registering framebuffer.
- Export drm/gem's shadow plane handling, and use it in vkms.
- Assorted small fixes.
Driver Changes:
- Add eDP backlight to nouveau.
- Assorted fixes and cleanups to nouveau, panfrost, vmwgfx, anx7625,
amdgpu, gma500, radeon, mgag200, vgem, vc4, vkms, omapdrm.
- Add support for Samsung DB7430, Samsung ATNA33XC20, EDT ETMV570G2DHU,
EDT ETM0350G0DH6, Innolux EJ030NA panels.
- Fix some simple pannels missing bus_format and connector types.
- Add mks-guest-stats instrumentation support to vmwgfx.
- Merge i915-ttm topic branch.
- Make s6e63m0 panel use Mipi-DBI helpers.
- Add detect() supoprt for AST.
- Use interrupts for hotplug on vc4.
- vmwgfx is now moved to drm-misc-next, as sroland is no longer a maintainer for now.
- vmwgfx now uses copies of vmware's internal device headers.
- Slowly convert ti-sn65dsi83 over to atomic.
- Rework amdgpu dma-resv handling.
- Fix virtio fencing for planes.
- Ensure amdgpu can always evict to SYSTEM.
- Many drivers fixed for implicit fencing rules.
- Set default prepare/cleanup fb for tiny, vram and simple helpers too.
- Rework panfrost gpu reset and related serialization.
- Update VKMS todo list.
- Make bochs a tiny gpu driver, and use vram helper.
- Use linux irq interfaces instead of drm_irq in some drivers.
- Add support for Raspberry Pi Pico to GUD.
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 16 Jul 2021 21:06:04 AEST
# gpg: using RSA key B97BD6A80CAC4981091AE547FE558C72A67013C3
# gpg: Good signature from "Maarten Lankhorst <maarten.lankhorst@linux.intel.com>" [expired]
# gpg: aka "Maarten Lankhorst <maarten@debian.org>" [expired]
# gpg: aka "Maarten Lankhorst <maarten.lankhorst@canonical.com>" [expired]
# gpg: Note: This key has expired!
# Primary key fingerprint: B97B D6A8 0CAC 4981 091A E547 FE55 8C72 A670 13C3
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/444811c3-cbec-e9d5-9a6b-9632eda7962a@linux.intel.com
Currently when we do the HW state readout, we dont set the shared dpll to NULL
for the bigjoiner slave which should not have a DPLL assigned. So it has
some garbage while the HW state readout is NULL. So explicitly reset
the shared dpll for bigjoiner slave pipe.
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/3465
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714223414.9849-1-manasi.d.navare@intel.com
Implements changes around PSR for alderlake-P:
- EDP_SU_TRACK_ENABLE was removed and bit 30 now has other function
- Some bits of PSR2_MAN_TRK_CTL moved and SF_PARTIAL_FRAME_UPDATE was
removed setting SU_REGION_START/END_ADDR will do this job
- SU_REGION_START/END_ADDR have now line granularity but will need to
be aligned with DSC when the PSRS + DSC support lands
BSpec: 50422
BSpec: 50424
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625235600.765677-1-jose.souza@intel.com
It's a noop on DG1, and in the future when need to support other devices
which let us control the coherency, then it should be an immutable
creation time property for the BO. This will likely be controlled
through a new gem_create_ext extension.
v2: add some kernel doc for the discrete changes, and document the
implicit rules
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-2-matthew.auld@intel.com
Set DSC BPP to the value forced through
debugfs. It can go from bpc to bpp-1.
v2: Use default dsc bpp when we are just
doing force_dsc_en, use default dsc bpp
for invalid force_dsc_bpp values. (Jani)
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720064907.9771-4-vandita.kulkarni@intel.com
This patch creates a per connector debugfs node to expose
the Compressed BPP. The same node can be used from userspace
to force DSC to a certain BPP(all accepted values).
This is useful to verify all supported/requested
compression bpp's through IGT
v2: Remove unnecessary logic (Jani)
v3: Drop pipe bpp in debugfs node (Vandita)
v4: Minor cleanups (Vandita)
v5: Fix NULL pointer dereference
v6: Fix dim tool checkpatch errors
Release the lock before return (Vandita)
v7: Rename to file to dsc_bpp, remove unwanted
dsc bpp range check from v6, permissions (Jani)
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Navare Manasi D <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720064907.9771-3-vandita.kulkarni@intel.com
Though there is a write option available on fec_suport
debugfs file, so far it has been registering with read
permissions only.
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720064907.9771-2-vandita.kulkarni@intel.com
This reverts commit 9e31c1fe45. Ever
since that commit, we've been having issues where a hang in one client
can propagate to another. In particular, a hang in an app can propagate
to the X server which causes the whole desktop to lock up.
Error propagation along fences sound like a good idea, but as your bug
shows, surprising consequences, since propagating errors across security
boundaries is not a good thing.
What we do have is track the hangs on the ctx, and report information to
userspace using RESET_STATS. That's how arb_robustness works. Also, if my
understanding is still correct, the EIO from execbuf is when your context
is banned (because not recoverable or too many hangs). And in all these
cases it's up to userspace to figure out what is all impacted and should
be reported to the application, that's not on the kernel to guess and
automatically propagate.
What's more, we're also building more features on top of ctx error
reporting with RESET_STATS ioctl: Encrypted buffers use the same, and the
userspace fence wait also relies on that mechanism. So it is the path
going forward for reporting gpu hangs and resets to userspace.
So all together that's why I think we should just bury this idea again as
not quite the direction we want to go to, hence why I think the revert is
the right option here.
For backporters: Please note that you _must_ have a backport of
https://lore.kernel.org/dri-devel/20210602164149.391653-2-jason@jlekstrand.net/
for otherwise backporting just this patch opens up a security bug.
v2: Augment commit message. Also restore Jason's sob that I
accidentally lost.
v3: Add a note for backporters
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reported-by: Marcin Slusarz <marcin.slusarz@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Marcin Slusarz <marcin.slusarz@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3080
Fixes: 9e31c1fe45 ("drm/i915: Propagate errors on awaiting already signaled fences")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-3-jason@jlekstrand.net
(cherry picked from commit 93a2711cdd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts 686c7c35ab ("drm/i915/gem: Asynchronous cmdparser"). The
justification for this commit in the git history was a vague comment
about getting it out from under the struct_mutex. While this may
improve perf for some workloads on Gen7 platforms where we rely on the
command parser for features such as indirect rendering, no numbers were
provided to prove such an improvement. It claims to closed two
gitlab/bugzilla issues but with no explanation whatsoever as to why or
what bug it's fixing.
Meanwhile, by moving command parsing off to an async callback, it leaves
us with a problem of what to do on error. When things were synchronous,
EXECBUFFER2 would fail with an error code if parsing failed. When
moving it to async, we needed another way to handle that error and the
solution employed was to set an error on the dma_fence and then trust
that said error gets propagated to the client eventually. Moving back
to synchronous will help us untangle the fence error propagation mess.
This also reverts most of 0edbb9ba1b ("drm/i915: Move cmd parser
pinning to execbuffer") which is a refactor of some of our allocation
paths for asynchronous parsing. Now that everything is synchronous, we
don't need it.
v2 (Daniel Vetter):
- Add stabel Cc and Fixes tag
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: <stable@vger.kernel.org> # v5.6+
Fixes: 9e31c1fe45 ("drm/i915: Propagate errors on awaiting already signaled fences")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-2-jason@jlekstrand.net
(cherry picked from commit 93b7133041)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts a6c5e2aea7 ("drm/i915: Skip over MI_NOOP when parsing").
It complicates the batch parsing code a bit and increases indentation
for no reason other than fast-skipping a command that userspace uses
only rarely. Sure, there may be IGT tests that fill batches with NOOPs
but that's not a case we should optimize for in the kernel. We should
optimize for code clarity instead.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-6-jason@jlekstrand.net
Asynchronous command parsing was the only thing which ever returned a
non-zero error. With that gone, we can drop the error handling from
dma_fence_work.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-5-jason@jlekstrand.net
This reverts the rest of 0edbb9ba1b ("drm/i915: Move cmd parser
pinning to execbuffer"). Now that the only user of i915_gem_object_get_sg
without allow_alloc has been removed, we can drop the parameter. This
portion of the revert was broken into its own patch to aid review.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-4-jason@jlekstrand.net
This reverts commit 9e31c1fe45. Ever
since that commit, we've been having issues where a hang in one client
can propagate to another. In particular, a hang in an app can propagate
to the X server which causes the whole desktop to lock up.
Error propagation along fences sound like a good idea, but as your bug
shows, surprising consequences, since propagating errors across security
boundaries is not a good thing.
What we do have is track the hangs on the ctx, and report information to
userspace using RESET_STATS. That's how arb_robustness works. Also, if my
understanding is still correct, the EIO from execbuf is when your context
is banned (because not recoverable or too many hangs). And in all these
cases it's up to userspace to figure out what is all impacted and should
be reported to the application, that's not on the kernel to guess and
automatically propagate.
What's more, we're also building more features on top of ctx error
reporting with RESET_STATS ioctl: Encrypted buffers use the same, and the
userspace fence wait also relies on that mechanism. So it is the path
going forward for reporting gpu hangs and resets to userspace.
So all together that's why I think we should just bury this idea again as
not quite the direction we want to go to, hence why I think the revert is
the right option here.
For backporters: Please note that you _must_ have a backport of
https://lore.kernel.org/dri-devel/20210602164149.391653-2-jason@jlekstrand.net/
for otherwise backporting just this patch opens up a security bug.
v2: Augment commit message. Also restore Jason's sob that I
accidentally lost.
v3: Add a note for backporters
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reported-by: Marcin Slusarz <marcin.slusarz@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Marcin Slusarz <marcin.slusarz@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3080
Fixes: 9e31c1fe45 ("drm/i915: Propagate errors on awaiting already signaled fences")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-3-jason@jlekstrand.net
This reverts 686c7c35ab ("drm/i915/gem: Asynchronous cmdparser"). The
justification for this commit in the git history was a vague comment
about getting it out from under the struct_mutex. While this may
improve perf for some workloads on Gen7 platforms where we rely on the
command parser for features such as indirect rendering, no numbers were
provided to prove such an improvement. It claims to closed two
gitlab/bugzilla issues but with no explanation whatsoever as to why or
what bug it's fixing.
Meanwhile, by moving command parsing off to an async callback, it leaves
us with a problem of what to do on error. When things were synchronous,
EXECBUFFER2 would fail with an error code if parsing failed. When
moving it to async, we needed another way to handle that error and the
solution employed was to set an error on the dma_fence and then trust
that said error gets propagated to the client eventually. Moving back
to synchronous will help us untangle the fence error propagation mess.
This also reverts most of 0edbb9ba1b ("drm/i915: Move cmd parser
pinning to execbuffer") which is a refactor of some of our allocation
paths for asynchronous parsing. Now that everything is synchronous, we
don't need it.
v2 (Daniel Vetter):
- Add stabel Cc and Fixes tag
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: <stable@vger.kernel.org> # v5.6+
Fixes: 9e31c1fe45 ("drm/i915: Propagate errors on awaiting already signaled fences")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210714193419.1459723-2-jason@jlekstrand.net
dma-buf:
- Fix fence leak in sync_file_merge() error code
drm/panel:
- nt35510: Don't fail on DSI reads
fbdev:
- Avoid use-after-free by not deleting current video mode
ttm:
- Avoid NULL-ptr deref in ttm_range_man_fini()
vmwgfx:
- Fix a merge commit
qxl:
- fix a TTM regression
amdgpu:
- SR-IOV fixes
- RAS fixes
- eDP fixes
- SMU13 code unification to facilitate fixes in the future
- Add new renoir DID
- Yellow Carp fixes
- Beige Goby fixes
- Revert a bunch of TLB fixes that caused regressions
- Revert an LTTPR display regression
amdkfd
- Fix VRAM access regression
- SVM fixes
i915:
- Fix -EDEADLK handling regression
- Drop the page table optimisation
-----BEGIN PGP SIGNATURE-----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=6Jyb
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular rc2 fixes though a bit more than usual at rc2 stage, people
must have been testing early or else some fixes from last week got a
bit laggy.
There is one larger change in the amd fixes to amalgamate some power
management code on the newer chips with the code from the older chips,
it should only affects chips where support was introduced in rc1 and
it should make future fixes easier to maintain probably a good idea to
merge it now.
Otherwise it's mostly fixes across the board.
dma-buf:
- Fix fence leak in sync_file_merge() error code
drm/panel:
- nt35510: Don't fail on DSI reads
fbdev:
- Avoid use-after-free by not deleting current video mode
ttm:
- Avoid NULL-ptr deref in ttm_range_man_fini()
vmwgfx:
- Fix a merge commit
qxl:
- fix a TTM regression
amdgpu:
- SR-IOV fixes
- RAS fixes
- eDP fixes
- SMU13 code unification to facilitate fixes in the future
- Add new renoir DID
- Yellow Carp fixes
- Beige Goby fixes
- Revert a bunch of TLB fixes that caused regressions
- Revert an LTTPR display regression
amdkfd
- Fix VRAM access regression
- SVM fixes
i915:
- Fix -EDEADLK handling regression
- Drop the page table optimisation"
* tag 'drm-fixes-2021-07-16' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amdgpu: add another Renoir DID
drm/ttm: add a check against null pointer dereference
drm/i915/gtt: drop the page table optimisation
drm/i915/gt: Fix -EDEADLK handling regression
drm/amd/pm: Add waiting for response of mode-reset message for yellow carp
Revert "drm/amdkfd: Add heavy-weight TLB flush after unmapping"
Revert "drm/amdgpu: Add table_freed parameter to amdgpu_vm_bo_update"
Revert "drm/amdkfd: Make TLB flush conditional on mapping"
Revert "drm/amdgpu: Fix warning of Function parameter or member not described"
Revert "drm/amdkfd: Add memory sync before TLB flush on unmap"
drm/amd/pm: Fix BACO state setting for Beige_Goby
drm/amdgpu: Restore msix after FLR
drm/amdkfd: Allow CPU access for all VRAM BOs
drm/amdgpu/display - only update eDP's backlight level when necessary
drm/amdkfd: handle fault counters on invalid address
drm/amdgpu: Correct the irq numbers for virtual crtc
drm/amd/display: update header file name
drm/amd/pm: drop smu_v13_0_1.c|h files for yellow carp
drm/amd/display: remove faulty assert
Revert "drm/amd/display: Always write repeater mode regardless of LTTPR"
...
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards). To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The switch from old old IS_FOO_REVID() macros to the new table-based
IS_FOO_{GT,DISP}_STEP() macros is needed on both drm-intel-next (for
display-based DMC matching) and drm-intel-gt-next (for workaround
guards). To avoid conflicts, we'll apply the patches to a topic branch
and merge it to both intel branches to ensure the transition to the
new macros is clean.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
We're past the point at which we usually drop workarounds that were
never needed on production hardware. The driver will already print an
error and apply taint if loaded on pre-production hardware.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-13-matthew.d.roper@intel.com
Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.
This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.
v2:
- Use COMMON_STEP() macro in table. (Anusha)
Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com
Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.
v2:
- Use COMMON_STEP(). (Anusha)
Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com
Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward. While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).
Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping. The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information. We've
requested that the missing information be restored.
I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware. An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.
v2:
- Drop pre-production steppings and add error/taint at startup when
loading on pre-production hardware.
Bspec: 21141 # pre-Nov 2019 snapshot
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com
Switch GLK to use a revid->stepping table as we're trying to do on all
platforms going forward. Pre-production and placeholder revisions are
omitted.
Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.
Bspec: 19131
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com
Switch BXT to use a revid->stepping table as we're trying to do on all
platforms going forward. Note that the REVID macros we had before
weren't being used anywhere in the code and weren't even correct; the
table values come from the bspec (and omits all the placeholder and
preproduction revisions).
Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.
Bspec: 13620
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com
We're long past the point where we need to care about pre-production
hardware, and we already warn the user and taint the kernel if we detect
the driver is being loaded on pre-production hardware.
Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-5-matthew.d.roper@intel.com
Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward. Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.
Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1). Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.
v2:
- Since GT and display steppings are always identical on SKL use a
macro to set both values at once in a more readable manner. (Anusha)
- Drop preproduction steppings.
Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com
Although we're converting our workarounds to use a revid->stepping
lookup table, the function that detects pre-production hardware should
continue to compare against PCI revision ID values directly. These are
listed in the bspec as integers, so it's easier to confirm their
correctness if we just use an integer literal rather than a symbolic
name anyway.
Bspec: 13620, 19131, 13626, 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-3-matthew.d.roper@intel.com
We skip filling out the pt with scratch entries if the va range covers
the entire pt, since we later have to fill it with the PTEs for the
object pages anyway. However this might leave open a small window where
the PTEs don't point to anything valid for the HW to consume.
When for example using 2M GTT pages this fill_px() showed up as being
quite significant in perf measurements, and ends up being completely
wasted since we ignore the pt and just use the pde directly.
Anyway, currently we have our PTE construction split between alloc and
insert, which is probably slightly iffy nowadays, since the alloc
doesn't actually allocate anything anymore, instead it just sets up the
page directories and points the PTEs at the scratch page. Later when we
do the insert step we re-program the PTEs again. Better might be to
squash the alloc and insert into a single step, then bringing back this
optimisation(along with some others) should be possible.
Fixes: 1482667324 ("drm/i915: Only initialize partially filled pagetables")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com
(cherry picked from commit 8f88ca76b3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We skip filling out the pt with scratch entries if the va range covers
the entire pt, since we later have to fill it with the PTEs for the
object pages anyway. However this might leave open a small window where
the PTEs don't point to anything valid for the HW to consume.
When for example using 2M GTT pages this fill_px() showed up as being
quite significant in perf measurements, and ends up being completely
wasted since we ignore the pt and just use the pde directly.
Anyway, currently we have our PTE construction split between alloc and
insert, which is probably slightly iffy nowadays, since the alloc
doesn't actually allocate anything anymore, instead it just sets up the
page directories and points the PTEs at the scratch page. Later when we
do the insert step we re-program the PTEs again. Better might be to
squash the alloc and insert into a single step, then bringing back this
optimisation(along with some others) should be possible.
Fixes: 1482667324 ("drm/i915: Only initialize partially filled pagetables")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713130431.2392740-1-matthew.auld@intel.com
Update is_swiotlb_active to add a struct device argument. This will be
useful later to allow for different pools.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add several module failure load inject points in the CT buffer creation
code path.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-8-matthew.brost@intel.com
CTB writes are now in the path of command submission and should be
optimized for performance. Rather than reading CTB descriptor values
(e.g. head, tail) which could result in accesses across the PCIe bus,
store shadow local copies and only read/write the descriptor values when
absolutely necessary. Also store the current space in the each channel
locally.
v2:
(Michal)
- Add additional sanity checks for head / tail pointers
- Use GUC_CTB_HDR_LEN rather than magic 1
v3:
(Michal / John H)
- Drop redundant check of head value
v4:
(John H)
- Drop redundant checks of tail / head values
v5:
(Michal)
- Address more nits
v6:
(Michal)
- Add GEM_BUG_ON sanity check on ctb->space
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-7-matthew.brost@intel.com
Implement a stall timer which fails H2G CTBs once a period of time
with no forward progress is reached to prevent deadlock.
v2:
(Michal)
- Improve error message in ct_deadlock()
- Set broken when ct_deadlock() returns true
- Return -EPIPE on ct_deadlock()
v3:
(Michal)
- Add ms to stall timer comment
(Matthew)
- Move broken check to intel_guc_ct_send()
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-6-matthew.brost@intel.com
Add non blocking CTB send function, intel_guc_send_nb. GuC submission
will send CTBs in the critical path and does not need to wait for these
CTBs to complete before moving on, hence the need for this new function.
The non-blocking CTB now must have a flow control mechanism to ensure
the buffer isn't overrun. A lazy spin wait is used as we believe the
flow control condition should be rare with a properly sized buffer.
The function, intel_guc_send_nb, is exported in this patch but unused.
Several patches later in the series make use of this function.
v2:
(Michal)
- Use define for H2G room calculations
- Move INTEL_GUC_SEND_NB define
(Daniel Vetter)
- Use msleep_interruptible rather than cond_resched
v3:
(Michal)
- Move includes to following patch
- s/INTEL_GUC_SEND_NB/INTEL_GUC_CT_SEND_NB/g
v4:
(John H)
- Update comment, add type local variable
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-5-matthew.brost@intel.com
With the introduction of non-blocking CTBs more than one CTB can be in
flight at a time. Increasing the size of the CTBs should reduce how
often software hits the case where no space is available in the CTB
buffer.
Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-4-matthew.brost@intel.com
Improve the error message when a unsolicited CT response is received by
printing fence that couldn't be found, the last fence, and all requests
with a response outstanding.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-3-matthew.brost@intel.com
In upcoming patch we will allow more CTB requests to be sent in
parallel to the GuC for processing, so we shouldn't assume any more
that GuC will always reply without 10ms.
Use bigger value hardcoded value of 1s instead.
v2: Add CONFIG_DRM_I915_GUC_CTB_TIMEOUT config option
v3:
(Daniel Vetter)
- Use hardcoded value of 1s rather than config option
v4:
(Michal)
- Use defines for timeout values
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708162055.129996-2-matthew.brost@intel.com
The conversion to ww mutexes failed to address the fence code which
already returns -EDEADLK when we run out of fences. Ww mutexes on
the other hand treat -EDEADLK as an internal errno value indicating
a need to restart the operation due to a deadlock. So now when the
fence code returns -EDEADLK the higher level code erroneously
restarts everything instead of returning the error to userspace
as is expected.
To remedy this let's switch the fence code to use a different errno
value for this. -ENOBUFS seems like a semi-reasonable unique choice.
Apart from igt the only user of this I could find is sna, and even
there all we do is dump the current fence registers from debugfs
into the X server log. So no user visible functionality is affected.
If we really cared about preserving this we could of course convert
back to -EDEADLK higher up, but doesn't seem like that's worth
the hassle here.
Not quite sure which commit specifically broke this, but I'll
just attribute it to the general gem ww mutex work.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Testcase: igt/gem_pread/exhaustion
Testcase: igt/gem_pwrite/basic-exhaustion
Testcase: igt/gem_fenced_exec_thrash/too-many-fences
Fixes: 80f0b679d6 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630164413.25481-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 78d2ad7eb4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Catching up with 5.14-rc1 and also preparing for a
needed common topic branch for the "Minor revid/stepping
and workaround cleanup"
Reference: https://patchwork.freedesktop.org/series/92299/
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Most of the places are using this format so lets consolidate it.
v2:
- split patch in two: display and non-display because of conflicts
between drm-intel-gt-next x drm-intel-next
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-1-jose.souza@intel.com
Same bit was required for Wa_14012131227 in DG1 now it is also
required as Wa_1508744258 to TGL, RKL, DG1, ADL-S and ADL-P.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-3-jose.souza@intel.com
Most of the places are using this format so lets consolidate it.
v2:
- split patch in two: display and non-display because of conflicts
between drm-intel-gt-next x drm-intel-next
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713003854.143197-2-jose.souza@intel.com
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
warning by explicitly adding a return; statement:
drivers/gpu/drm/i915/gem/i915_gem_shrinker.c:65:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The conversion to ww mutexes failed to address the fence code which
already returns -EDEADLK when we run out of fences. Ww mutexes on
the other hand treat -EDEADLK as an internal errno value indicating
a need to restart the operation due to a deadlock. So now when the
fence code returns -EDEADLK the higher level code erroneously
restarts everything instead of returning the error to userspace
as is expected.
To remedy this let's switch the fence code to use a different errno
value for this. -ENOBUFS seems like a semi-reasonable unique choice.
Apart from igt the only user of this I could find is sna, and even
there all we do is dump the current fence registers from debugfs
into the X server log. So no user visible functionality is affected.
If we really cared about preserving this we could of course convert
back to -EDEADLK higher up, but doesn't seem like that's worth
the hassle here.
Not quite sure which commit specifically broke this, but I'll
just attribute it to the general gem ww mutex work.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Testcase: igt/gem_pread/exhaustion
Testcase: igt/gem_pwrite/basic-exhaustion
Testcase: igt/gem_fenced_exec_thrash/too-many-fences
Fixes: 80f0b679d6 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630164413.25481-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On HP Fury G7 Workstations, graphics output is re-routed from Intel GFX
to discrete GFX after S3. This is not desirable, because userspace will
treat connected display as a new one, losing display settings.
The expected behavior is to let discrete GFX drives all external
displays.
The platform in question uses ACPI method \_SB.PCI0.HGME to enable MUX.
The method is inside the another _DSM, so add the _DSM and call it
accordingly.
I also tested some MUX-less and iGPU only laptops with that _DSM, no
regression was found.
v4:
- Rebase.
- Change the DSM name to avoid confusion.
- Move the function call to intel_opregion.
v3:
- Remove BXT from names.
- Change the parameter type.
- Fold the function into intel_modeset_init_hw().
v2:
- Forward declare struct pci_dev.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3113
References: https://lore.kernel.org/intel-gfx/1460040732-31417-4-git-send-email-animesh.manna@intel.com/
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520065832.614245-1-kai.heng.feng@canonical.com
Besides the arch version returned by GRAPHICS_VER(), new platforms
contain a "release id" to make clear the difference from one platform to
another.
The release id number is not formally defined by hardware until future
platforms that will expose it via a new GMD_ID register. For the
platforms we support before that register becomes available we will set
the values in software and we can set them as we please. So the plan is
to set them so we can group different features under a single
GRAPHICS_VER_FULL() check.
After GMD_ID is used, the usefulness of a "full version check" will be
greatly reduced and will be mostly used for deciding workarounds and a
few code paths. So it makes sense to keep it as a separate field from
graphics_ver. Also, as a platform with `release == n` may be closer
feature-wise to `n - 2` than to `n - 1`, use the word "release" rather
than the more common "minor" for this
This is a mix of 2 independent changes: one by me and the other by Matt
Roper.
v2:
- Reword commit message to make it clearer why we don't call it
"minor" (Matt Roper and Tvrtko)
- Rename variables s/*_ver_release/*_rel/ and print them in a single
line formatted as {ver}.{rel:2} (Jani and Matt Roper)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707235921.2416911-2-lucas.demarchi@intel.com
The PUNIT FW is currently returning 0 for all memory bandwidth
parameters. Read the values directly from MCHBAR offsets 0x5918 and
0x4000(4).
v2 (Lucas): tidy up checking for ret slightly
v3 (Lucas):
- Squash change to double the memory bandwidth based on
MCHBAR Gear_type
- Move ICL_GEAR_TYPE_MASK to the appropriate place and change prefix
to DG1
- Move register definitions to i915_reg.h
- Make the MCHBAR path permanent for DG1
- Convert to REG_BIT()/REG_GENMASK()
v4: Drop unneeded initializations
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708175226.2451260-1-lucas.demarchi@intel.com
For discrete, users of pin_map() needs to obey the same rules at the TTM
backend, where we map system only objects as WB, and everything else as
WC. The simplest for now is to just force the correct mapping type as
per the new rules for discrete.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-1-matthew.auld@intel.com
On XELPD platforms, color management support is not yet enabled.
Fix wrongly reporting the same through platform info, which was
resulting in incorrect initialization and usage.
Cc: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095253.23848-1-uma.shankar@intel.com
dma-buf:
- doc fixes
amdgpu:
- Misc Navi fixes
- Powergating fix
- Yellow Carp updates
- Beige Goby updates
- S0ix fix
- Revert overlay validation fix
- GPU reset fix for DC
- PPC64 fix
- Add new dimgrey cavefish DID
- RAS fix
- TTM fixes
amdkfd:
- SVM fixes
radeon:
- Fix missing drm_gem_object_put in error path
- NULL ptr deref fix
i915:
- display DP VSC fix
- DG1 display fix
- IRQ fixes
- IRQ demidlayering
gma500:
- bo leaks in error paths fixed
-----BEGIN PGP SIGNATURE-----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=HX2N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-07-08-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Some fixes for rc1 that came in the past weeks, mainly a bunch of
amdgpu fixes, some i915 and the rest are misc around the place. I'm
sending this a bit early so some more stuff may show up, but I'll
probably take tomorrow off.
dma-buf:
- doc fixes
amdgpu:
- Misc Navi fixes
- Powergating fix
- Yellow Carp updates
- Beige Goby updates
- S0ix fix
- Revert overlay validation fix
- GPU reset fix for DC
- PPC64 fix
- Add new dimgrey cavefish DID
- RAS fix
- TTM fixes
amdkfd:
- SVM fixes
radeon:
- Fix missing drm_gem_object_put in error path
- NULL ptr deref fix
i915:
- display DP VSC fix
- DG1 display fix
- IRQ fixes
- IRQ demidlayering
gma500:
- bo leaks in error paths fixed"
* tag 'drm-next-2021-07-08-1' of git://anongit.freedesktop.org/drm/drm: (52 commits)
drm/i915: Drop all references to DRM IRQ midlayer
drm/i915: Use the correct IRQ during resume
drm/i915/display/dg1: Correctly map DPLLs during state readout
drm/i915/display: Do not zero past infoframes.vsc
drm/amdgpu: Conditionally reset SDMA RAS error counts
drm/amdkfd: Maintain svm_bo reference in page->zone_device_data
drm/amdkfd: add invalid pages debug at vram migration
drm/amdkfd: skip migration for pages already in VRAM
drm/amdkfd: skip invalid pages during migrations
drm/amdkfd: classify and map mixed svm range pages in GPU
drm/amdkfd: use hmm range fault to get both domain pfns
drm/amdgpu: get owner ref in validate and map
drm/amdkfd: set owner ref to svm range prefault
drm/amdkfd: add owner ref param to get hmm pages
drm/amdkfd: device pgmap owner at the svm migrate init
drm/amdkfd: inc counter on child ranges with xnack off
drm/amd/display: Extend DMUB diagnostic logging to DCN3.1
drm/amdgpu: Update NV SIMD-per-CU to 2
drm/amdgpu: add new dimgrey cavefish DID
drm/amd/pm: skip PrepareMp1ForUnload message in s0ix
...
All the proto-context stuff for context creation exists to allow older
userspace drivers to set VMs and engine sets via SET_CONTEXT_PARAM.
Drivers need to update to use CONTEXT_CREATE_EXT_* for this going
forward. Force the issue by blocking the old mechanism on any future
hardware generations.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-31-jason@jlekstrand.net
Now that we have the whole engine set and VM at context creation time,
we can just assign those fields instead of creating first and handling
the VM and engines later. This lets us avoid creating useless VMs and
engine sets and lets us get rid of the complex VM setting code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-30-jason@jlekstrand.net
We want to delete __assign_ppgtt and, generally, stop setting the VM
after context creation. This is the one place I could find in the
selftests where we set a VM after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-29-jason@jlekstrand.net
This better models where we want to go with contexts in general where
things like the VM and engine set are create parameters instead of being
set after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-28-jason@jlekstrand.net
When the APIs were added to manage the engine set on a GEM context
directly from userspace, the questionable choice was made to allow
changing the engine set on a context at any time. This is horribly racy
and there's absolutely no reason why any userspace would want to do this
outside of trying to exercise interesting race conditions. By removing
support for CONTEXT_PARAM_ENGINES from ctx_setparam, we make it
impossible to change the engine set after the context has been fully
created.
This doesn't yet let us delete all the deferred engine clean-up code as
that's still used for handling the case where the client dies or calls
GEM_CONTEXT_DESTROY while work is in flight. However, moving to an API
where the engine set is effectively immutable gives us more options to
potentially clean that code up a bit going forward. It also removes a
whole class of ways in which a client can hurt itself or try to get
around kernel context banning.
v2 (Jason Ekstrand):
- Expand the commit mesage
v3 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_ENGINES returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-27-jason@jlekstrand.net
When the APIs were added to manage VMs more directly from userspace, the
questionable choice was made to allow changing out the VM on a context
at any time. This is horribly racy and there's absolutely no reason why
any userspace would want to do this outside of testing that exact race.
By removing support for CONTEXT_PARAM_VM from ctx_setparam, we make it
impossible to change out the VM after the context has been fully
created. This lets us delete a bunch of deferred task code as well as a
duplicated (and slightly different) copy of the code which programs the
PPGTT registers.
v2 (Jason Ekstrand):
- Expand the commit message
v3 (Daniel Vetter):
- Don't drop the __rcu on the vm pointer
v4 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_VM returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-26-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such as the context priority, others
are far trickier such as the VM or the set of engines. In order to swap
out the VM, for instance, we have to delay until all current in-flight
work is complete, swap in the new VM, and then continue. This leads to
a plethora of potential race conditions we'd really rather avoid.
In previous patches, we added a i915_gem_proto_context struct which is
capable of storing and tracking all such create parameters. This commit
delays the creation of the actual context until after the client is done
configuring it with SET_CONTEXT_PARAM. From the perspective of the
client, it has the same u32 context ID the whole time. From the
perspective of i915, however, it's an i915_gem_proto_context right up
until the point where we attempt to do something which the proto-context
can't handle. Then the real context gets created.
This is accomplished via a little xarray dance. When GEM_CONTEXT_CREATE
is called, we create a proto-context, reserve a slot in context_xa but
leave it NULL, the proto-context in the corresponding slot in
proto_context_xa. Then, whenever we go to look up a context, we first
check context_xa. If it's there, we return the i915_gem_context and
we're done. If it's not, we look in proto_context_xa and, if we find it
there, we create the actual context and kill the proto-context.
In order for this dance to work properly, everything which ever touches
a proto-context is guarded by drm_i915_file_private::proto_context_lock,
including context creation. Yes, this means context creation now takes
a giant global lock but it can't really be helped and that should never
be on any driver's fast-path anyway.
v2 (Daniel Vetter):
- Commit message grammatical fixes.
- Use WARN_ON instead of GEM_BUG_ON
- Rename lazy_create_context_locked to finalize_create_context_locked
- Rework the control-flow logic in the setparam ioctl
- Better documentation all around
v3 (kernel test robot):
- Make finalize_create_context_locked static
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-25-jason@jlekstrand.net
There's a big comment saying how useful it is but no one is using this
for anything anymore.
It was added in 2bfa996e03 ("drm/i915: Store owning file on the
i915_address_space") and used for debugfs at the time as well as telling
the difference between the global GTT and a PPGTT. In f6e8aa3871
("drm/i915: Report the number of closed vma held by each context in
debugfs") we removed one use of it by switching to a context walk and
comparing with the VM in the context. Finally, VM stats for debugfs
were entirely nuked in db80a1294c ("drm/i915/gem: Remove per-client
stats from debugfs/i915_gem_objects")
v2 (Daniel Vetter):
- Delete a struct drm_i915_file_private pre-declaration
- Add a comment to the commit message about history
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-24-jason@jlekstrand.net
We're about to start doing lazy context creation which means contexts
get created in i915_gem_context_lookup and we may start having more
errors than -ENOENT.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-23-jason@jlekstrand.net
This means that the proto-context needs to grow support for engine
configuration information as well as setparam logic. Fortunately, we'll
be deleting a lot of setparam logic on the primary context shortly so it
will hopefully balance out.
There's an extra bit of fun here when it comes to setting SSEU and the
way it interacts with PARAM_ENGINES. Unfortunately, thanks to
SET_CONTEXT_PARAM and not being allowed to pick the order in which we
handle certain parameters, we have think about those interactions.
v2 (Daniel Vetter):
- Add a proto_context_free_user_engines helper
- Comment on SSEU in the commit message
- Use proto_context_set_persistence in set_proto_ctx_param
v3 (Daniel Vetter):
- Fix a doc comment
- Do an explicit HAS_FULL_PPGTT check in set_proto_ctx_vm instead of
relying on pc->vm != NULL.
- Handle errors for CONTEXT_PARAM_PERSISTENCE
- Don't allow more resetting user engines
- Rework initialization of UCONTEXT_PERSISTENCE
v4 (Jason Ekstrand):
- Move hand-rolled initialization of UCONTEXT_PERSISTENCE to an
earlier patch
v5 (Jason Ekstrand):
- Move proto_context_set_persistence to this patch
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-22-jason@jlekstrand.net
What we really want to check is that size of the engines array, i.e.
args->size - sizeof(*user) is divisible by the element size, i.e.
sizeof(*user->engines) because that's what's required for computing the
array length right below the check. However, we're currently not doing
this and instead doing a compile-time check that sizeof(*user) is
divisible by sizeof(*user->engines) and avoiding the subtraction. As
far as I can tell, the only reason for the more confusing pair of checks
is to avoid a single subtraction of a constant.
The other thing the BUILD_BUG_ON might be trying to implicitly check is
that offsetof(user->engines) == sizeof(*user) and we don't have any
weird padding throwing us off. However, that's not the check it's doing
and it's not even a reliable way to do that check.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-21-jason@jlekstrand.net
This is the VM equivalent of i915_gem_context_lookup. It's only used
once in this patch but future patches will need to duplicate this lookup
code so it's better to have it in a helper.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-20-jason@jlekstrand.net
For now this is a no-op because everyone passes in a null SSEU but it
lets us get some of the error handling and selftest refactoring plumbed
through.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-19-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such the context priority, others are
far trickier such as the VM or the set of engines. In order to swap out
the VM, for instance, we have to delay until all current in-flight work
is complete, swap in the new VM, and then continue. This leads to a
plethora of potential race conditions we'd really rather avoid.
Unfortunately, both methods of setting the VM and the engine set are in
active use today so we can't simply disallow setting the VM or engine
set vial SET_CONTEXT_PARAM. In order to work around this wart, this
commit adds a proto-context struct which contains all the context create
parameters.
v2 (Daniel Vetter):
- Better commit message
- Use __set/clear_bit instead of set/clear_bit because there's no race
and we don't need the atomics
v3 (Daniel Vetter):
- Use manual bitops and BIT() instead of __set_bit
v4 (Daniel Vetter):
- Add a changelog to the commit message
- Better hyperlinking in docs
- Create the default PPGTT in i915_gem_create_context
v5 (Daniel Vetter):
- Hand-roll the initialization of UCONTEXT_PERSISTENCE
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-17-jason@jlekstrand.net
In order to prevent kernel doc warnings, also fill out docs for any
missing fields and fix those that forgot the "@".
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-16-jason@jlekstrand.net
With the proto-context stuff added later in this series, we end up
having to duplicate set_priority. This lets us avoid duplicating the
validation logic.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-15-jason@jlekstrand.net
As far as I can tell, the only real reason for this is to avoid taking a
reference to the i915_gem_context. The cost of those two atomics
probably pales in comparison to the cost of the ioctl itself so we're
really not buying ourselves anything here. We're about to make context
lookup a tiny bit more complicated, so let's get rid of the one hand-
rolled case.
Some usermode drivers such as our Vulkan driver call GET_RESET_STATS on
every execbuf so the perf here could theoretically be an issue. If this
ever does become a performance issue for any such userspace drivers,
they can use set CONTEXT_PARAM_RECOVERABLE to false and look for -EIO
coming from execbuf to check for hangs instead.
v2 (Daniel Vetter):
- Add a comment in the commit message about recoverable contexts
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-14-jason@jlekstrand.net
John Harrison
Matthew Brost
José Roberto de Souza
Stanislav Lisovskiy
Matthew Auld
Thomas Hellström
Jason Ekstrand
Lucas De Marchi
Rodrigo Vivi
Dave Airlie
Matt Roper
Tvrtko Ursulin
Anusha Srivatsa
Prathap Kumar Valsan
Stuart Summers
Venkata Sandeep Dhanalakota
Paulo Zanoni
Daniel Vetter
Maarten Lankhorst
Christoph Hellwig
Manasi Navare
Vandita Kulkarni
Patnana Venkata Sai
Linus Torvalds
Anshuman Gupta
Claire Chang
Ville Syrjälä
Gustavo A. R. Silva
Kai-Heng Feng
Clint Taylor
Uma Shankar