Very old numbers indicate this is a 66% improvement when remapping the
entire object for fence contention - due to the elimination of
track_pfn_insert and its strcmp.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Testcase: igt/gem_fence_upload/performance
Testcase: igt/gem_mmap_gtt
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-6-chris@chris-wilson.co.uk
As io_mapping.h now always allocates the struct, we can avoid that
allocation and extra pointer dance by embedding the struct inside
drm_i915_private
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-5-chris@chris-wilson.co.uk
Currently, we only allocate a structure to hold metadata if we need to
allocate an ioremap for every access, such as on x86-32. However, it
would be useful to store basic information about the io-mapping, such as
its page protection, on all platforms.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: linux-mm@kvack.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-4-chris@chris-wilson.co.uk
Only fbc1 is tied to using a fence. Later iterations of fbc are more
flexible and allow operation on unfenced frontbuffers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-3-chris@chris-wilson.co.uk
If the frontbuffer doesn't have an associated fence, it will have a
fence reg of -1. If we attempt to OR in this register into the FBC
control register we end up setting all control bits, oops!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Reviwed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160819155428.1670-2-chris@chris-wilson.co.uk
In the recent patch
bc3d674 drm/i915: Allow userspace to request no-error-capture upon ...
the final version moved the flags and the associated #defines around
so they were adjacent; unfortunately, they ended up between a comment
and the thing (hw_id) to which the comment applies :(
So this patch reshuffles the comment and subject back together.
Also, as we're touching 'hw_id', let's change it from just 'unsigned'
to a fully-specified 'unsigned int', because some code checking tools
(including checkpatch) object to plain 'unsigned'.
Fixes: bc3d674462 ("drm/i915: Allow userspace to request no-error-capture...")
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1471616622-6919-1-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
A significant proportion of the cmdparsing time for some batches is the
cost to find the register in the mmiotable. We ensure that those tables
are in ascending order such that we could do a binary search if it was
ever merited. It is.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-38-chris@chris-wilson.co.uk
On the blitter (and in test code), we see long sequences of repeated
commands, e.g. XY_PIXEL_BLT, XY_SCANLINE_BLT, or XY_SRC_COPY. For these,
we can skip the hashtable lookup by remembering the previous command
descriptor and doing a straightforward compare of the command header.
The corollary is that we need to do one extra comparison before lookup
up new commands.
v2: Less magic mask (ok, it is still magic, but now you cannot see!)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-36-chris@chris-wilson.co.uk
The existing code's hashfunction is very suboptimal (most 3D commands
use the same bucket degrading the hash to a long list). The code even
acknowledge that the issue was known and the fix simple:
/*
* If we attempt to generate a perfect hash, we should be able to look at bits
* 31:29 of a command from a batch buffer and use the full mask for that
* client. The existing INSTR_CLIENT_MASK/SHIFT defines can be used for this.
*/
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-35-chris@chris-wilson.co.uk
For simplicity, we want to continue using a contiguous mapping of the
command buffer, but we can reduce the number of vmappings we hold by
switching over to a page-by-page copy from the user batch buffer to the
shadow. The cost for saving one linear mapping is about 5% in trivial
workloads - which is more or less the overhead in calling kmap_atomic().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-34-chris@chris-wilson.co.uk
The single largest factor in the overhead of parsing the commands is the
setup of the virtual mapping to provide a continuous block for the batch
buffer. If we keep those vmappings around (against the better judgement
of mm/vmalloc.c, which we offset by handwaving and looking suggestively
at the shrinker) we can dramatically improve the performance of the
parser for small batches (such as media workloads). Furthermore, we can
use the prepare shmem read/write functions to determine how best we
need to clflush the range (rather than every page of the object).
The impact of caching both src/dst vmaps is +80% on ivb and +140% on byt
for the throughput on small batches. (Caching just the dst vmap and
iterating over the src, doing a page by page copy is roughly 5% slower
on both platforms. That may be an acceptable trade-off to eliminate one
cached vmapping, and we may be able to reduce the per-page copying overhead
further.) For *this* simple test case, the cmdparser is now within a
factor of 2 of ideal performance.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-33-chris@chris-wilson.co.uk
Since I have been using the BCS_TIMESTAMP to measure latency of
execution upon the blitter ring, allow regular userspace to also read
from that register. They are already allowed RCS_TIMESTAMP!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-32-chris@chris-wilson.co.uk
If the developer adds a register in the wrong order, we BUG during boot.
That makes development and testing very difficult. Let's be a bit more
friendly and disable the command parser with a big warning if the tables
are invalid.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-31-chris@chris-wilson.co.uk
Since commit 43566dedde ("drm/i915: Broaden application of
set-domain(GTT)") we allowed objects to be in the GTT domain, but unbound.
Therefore removing the GTT cache domain when removing the GGTT vma is no
longer semantically correct.
An unfortunate side-effect is we lose the wondrously named
i915_gem_object_finish_gtt(), not to be confused with
i915_gem_gtt_finish_object()!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-30-chris@chris-wilson.co.uk
We track the LRU access for eviction and bump the last access for the
user GGTT on set-to-gtt. When we do so we need to not only bump the
primary GGTT VMA but all partials as well. Similarly we want to
bump the last access tracking for when unpinning an object from the
scanout so that they do not get promptly evicted and hopefully remain
available for reuse on the next frame.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-29-chris@chris-wilson.co.uk
When using the aliasing ppgtt and pageflipping with the shrinker/eviction
active, we note that we often have to rebind the backbuffer before
flipping onto the scanout because it has an invalid alignment. If we
store the worst-case alignment required for a VMA, we can avoid having
to rebind at critical junctures.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-28-chris@chris-wilson.co.uk
The existing ABI says that scanouts are pinned into the mappable region
so that legacy clients (e.g. old Xorg or plymouthd) can write directly
into the scanout through a GTT mapping. However if the surface does not
fit into the mappable region, we are better off just trying to fit it
anywhere and hoping for the best. (Any userspace that is capable of
using ginormous scanouts is also likely not to rely on pure GTT
updates.) With the partial vma fault support, we are no longer
restricted to only using scanouts that we can pin (though it is still
preferred for performance reasons and for powersaving features like
FBC).
v2: Skip fence pinning when not mappable.
v3: Add a comment to explain the possible ramifications of not being
able to use fences for unmappable scanouts.
v4: Rebase to skip over some local patches
v5: Rebase to defer until after we have unmappable GTT fault support
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-27-chris@chris-wilson.co.uk
Often times we do not want to evict mapped objects from the GGTT as
these are quite expensive to teardown and frequently reused (causing an
equally, if not more so, expensive setup). In particular, when faulting
in a new object we want to avoid evicting an active object, or else we
may trigger a page-fault-of-doom as we ping-pong between evicting two
objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-26-chris@chris-wilson.co.uk
If FBC is set on a framebuffer that is unmapped, all GTT faults will be
from a partial mapping. Writes by the user through the partial VMA are
then untracked by the FBC and so we must use the ORIGIN_CPU when flushing
the I915_GEM_DOMAIN_GTT.
v2: Keep ORIGIN_CPU for set-to-domain(.write=CPU)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-25-chris@chris-wilson.co.uk
If we want to create a partial vma from a chunk that is the same size as
the object, create a normal ggtt vma instead. The benefit is that it
will match future requests for the normal ggtt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-24-chris@chris-wilson.co.uk
We want to always use the partial VMA as a fallback for a failure to
bind the object into the GGTT. This extends the support partial objects
in the GGTT to cover everything, not just objects too large.
v2: Call the partial view, view not partial.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-23-chris@chris-wilson.co.uk
In order to support setting up fences for partial mappings of an object,
we have to align those mappings with the fence. The minimum chunksize we
choose is at least the size of a single tile row.
v2: Make minimum chunk size a define for later use
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-22-chris@chris-wilson.co.uk
In order to handle tiled partial GTT mmappings, we need to associate the
fence with an individual vma.
v2: A couple of silly drops replaced spotted by Joonas
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-21-chris@chris-wilson.co.uk
Our current practice is to only name the actual list (here
dev_priv->fence_list) using "list", and elements upon that list are
referred to as "link". Further, the lru nature is of the list and not of
the node and including in the name does not disambiguate the link from
anything else.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-20-chris@chris-wilson.co.uk
Keep any error reported by the gup_worker until we are notified that the
arena has changed (via the mmu-notifier). This has the importance of
making two consecutive calls to i915_gem_object_get_pages() reporting
the same error, and curtailing a loop of detecting a fault and requeueing
a gup_worker.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-19-chris@chris-wilson.co.uk
If we have stolen available, make use of it for ringbuffer allocation.
Previously this was restricted to !llc platforms, as writing to stolen
requires a GGTT mapping - but now that we have partial mappable support,
the mappable aperture isn't quite so precious so we can use it more
freely and ringbuffers are a good user for the otherwise wasted stolen.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-18-chris@chris-wilson.co.uk
Now that we have WC vmapping available, we can bind our rings anywhere
in the GGTT and do not need to restrict them to the mappable region.
Except for stolen objects, for which direct access is verbatim and we
must use the mappable aperture.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-17-chris@chris-wilson.co.uk
By moving map-and-fenceable tracking from the object to the VMA, we gain
fine-grained tracking and the ability to track individual fences on the VMA
(subsequent patch).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-16-chris@chris-wilson.co.uk
If we cannot pin the entire object into the mappable region of the GTT,
try to pin a single page instead. This is much more likely to succeed,
and prevents us falling back to the clflush slow path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-14-chris@chris-wilson.co.uk
With the introduction of the reloc page cache, we are just one step away
from refactoring the relocation write functions into one. Not only does
it tidy the code (slightly), but it greatly simplifies the control logic
much to gcc's satisfaction.
v2: Add selftests to document the relationship between the clflush
flags, the KMAP bit and packing into the page-aligned pointer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-13-chris@chris-wilson.co.uk
There is an improbable, but not impossible, case that if we leave the
pages unpin as we operate on the object, then somebody via the shrinker
may steal the lock (which lock? right now, it is struct_mutex, THE lock)
and change the cache domains after we have already inspected them.
(Whilst here, avail ourselves of the opportunity to take a couple of
steps to make the two functions look more similar.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-11-chris@chris-wilson.co.uk
If we quickly switch from writing through the GTT to a read of the
physical page directly with the CPU (e.g. performing relocations through
the GTT and then running the command parser), we can observe that the
writes are not visible to the CPU. It is not a coherency problem, as
extensive investigations with clflush have demonstrated, but a mere
timing issue - we have to wait for the GTT to complete it's write before
we start our read from the CPU.
The issue can be illustrated in userspace with:
gtt = gem_mmap__gtt(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE);
cpu = gem_mmap__cpu(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE);
gem_set_domain(fd, handle, I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
for (i = 0; i < OBJECT_SIZE / 64; i++) {
int x = 16*i + (i%16);
gtt[x] = i;
clflush(&cpu[x], sizeof(cpu[x]));
assert(cpu[x] == i);
}
Experimenting with that shows that this behaviour is indeed limited to
recent Atom-class hardware.
Testcase: igt/gem_exec_flush/basic-batch-default-cmd #byt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-10-chris@chris-wilson.co.uk
If we want to read the pages directly via the CPU, we have to be sure
that we have to flush the writes via the GTT (as the CPU can not see
the address aliasing).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-9-chris@chris-wilson.co.uk
This is a companion to i915_gem_obj_prepare_shmem_read() that prepares
the backing storage for direct writes. It first serialises with the GPU,
pins the backing storage and then indicates what clfushes are required in
order for the writes to be coherent.
Whilst here, fix support for ancient CPUs without clflush for which we
cannot do the GTT+clflush tricks.
v2: Add i915_gem_obj_finish_shmem_access() for symmetry
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-8-chris@chris-wilson.co.uk
When doing relocations, we have to obtain a mapping to the page
containing the target address. This is either a kmap or iomap depending
on GPU and its cache coherency. Neighbouring relocation entries are
typically within the same page and so we can cache our kmapping between
them and avoid those pesky TLB flushes.
Note that there is some sleight-of-hand in how the slow relocate works
as the reloc_entry_cache implies pagefaults disabled (as we are inside a
kmap_atomic section). However, the slow relocate code is meant to be the
fallback from the atomic fast path failing. Fortunately it works as we
already have performed the copy_from_user for the relocation array (no
more pagefaults there) and the kmap_atomic cache is enabled after we
have waited upon an active buffer (so no more sleeping in atomic).
Magic!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-7-chris@chris-wilson.co.uk
If we cannot release the fence (for example if someone is inexplicably
trying to write into a tiled framebuffer that is currently pinned to the
display! *cough* kms_frontbuffer_tracking *cough*) fallback to using the
page-by-page pwrite/pread interface, rather than fail the syscall
entirely.
Since this is triggerable by the user (along pwrite) we have to remove
the WARN_ON(fence->pin_count).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-6-chris@chris-wilson.co.uk
Similarly to invalidating beforehand, if the object is mmapped via
I915_MMAP_WC we cannot track writes through the I915_GEM_DOMAIN_GTT. At
the conclusion of the write, i915_gem_object_flush_gtt_writes() we also
need to treat the origin carefully in case it may have been untracked.
See also commit aeecc9696a ("drm/i915: use ORIGIN_CPU for frontbuffer
invalidation on WC mmaps").
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-5-chris@chris-wilson.co.uk
As pwrite does not use the fence for its GTT access, and may even go
through a secondary interface avoiding the main VMA, we cannot treat the
write as automatically invalidated by the hardware and so we require
ORIGIN_CPU frontbufer invalidate/flushes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-4-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since vfree() now likes to WARN when passed a non-page-aligned pointer,
we need to discard the low bits to comply with it.
Fixes: d31d7cb146 ("drm/i915: Support for creating write combined type vmaps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-3-chris@chris-wilson.co.uk
After we update one PTE for a page, the caller expects to be able to
immediately use that through a GGTT read/write. To comply with the
callers expectations we therefore need to flush the chipset buffers
before returning.
Reported-by: Matti Hämäläinen <ccr@tnsp.org>
Fixes: d6473f5664 ("drm/i915: Add support for mapping an object page...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Matti Hämäläinen <ccr@tnsp.org>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-2-chris@chris-wilson.co.uk
If userspace is asynchronously streaming into the batch or other
execobjects, we may not flush those writes along with a change in cache
domain (as there is no change). Therefore those writes may end up in
internal chipset buffers and not visible to the GPU upon execution. We
must issue a flush command or otherwise we encounter incoherency in the
batchbuffers and the GPU executing invalid commands (i.e. hanging) quite
regularly.
v2: Throw a paranoid wmb() into the general flush so that we remain
consistent with before.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90841
Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Tested-by: Matti Hämäläinen <ccr@tnsp.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-1-chris@chris-wilson.co.uk
It's possible to have a non-zero plane mask and still wind up with a
total data rate of zero. There are two cases where this can happen:
* planes are active (from the KMS point of view), but are
all fully clipped (positioned offscreen)
* the only active plane on a CRTC is the cursor (which is handled
independently and not counted into the general data rate computations
These are both valid display setups (although unusual), so we need to
drop the WARN().
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: kms_universal_planes.cursor-only-pipe-*
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-4-git-send-email-matthew.d.roper@intel.com
Cc: stable@vger.kernel.org #v4.7+
intel_state->active_crtcs is usually only initialized when doing a
modeset. During our first atomic commit after boot, we're effectively
faking a modeset to sanitize the DDB/wm setup, so ensure that this field
gets initialized before use.
v2:
- Don't clobber active_crtcs if our first commit really is a modeset
(Maarten)
- Grab connection_mutex when faking a modeset during sanitization
(Maarten)
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-2-git-send-email-matthew.d.roper@intel.com
Cc: stable@vger.kernel.org #v4.7+
Daniel Vetter
Chris Wilson
Dave Gordon
Matt Roper