Previously we were using count-weight of the T124 for T30 in order to
get EMC clock rate that was reasonable for T30. In fact the count-weight
should be x2 times smaller on T30, but then devfreq was producing a bit
too low EMC clock rate for ISO memory clients, like display controller
for example.
Now both Tegra ACTMON and Tegra DRM display drivers support interconnect
framework and display driver tells to ICC what a minimum memory bandwidth
is needed, preventing FIFO underflows. Thus, now we can use a proper
count-weight value for Tegra30 and MC_ALL device config needs a bit more
aggressive boosting.
Add a separate ACTMON driver configuration that is specific to Tegra30.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch moves ACTMON driver away from generating OPP table by itself,
transitioning it to use the table which comes from device-tree. This
change breaks compatibility with older device-trees and brings support
for the interconnect framework to the driver. This is a mandatory change
which needs to be done in order to implement interconnect-based memory
DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory
bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock
rate directly.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Remove tegra20-devfreq in order to replace it with a EMC_STAT based
devfreq driver. Previously we were going to use MC_STAT based
tegra20-devfreq driver because EMC_STAT wasn't working properly, but
now that problem is resolved. This resolves complications imposed by
the removed driver since it was depending on both EMC and MC drivers
simultaneously.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds registration of a child platform device for the exynos
interconnect driver. It is assumed that the interconnect provider will
only be needed when #interconnect-cells property is present in the bus
DT node, hence the child device will be created only when such a property
is present.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tegra EMC driver was turned into a regular kernel driver, meaning that it
could be compiled as a loadable kernel module now. Hence EMC clock isn't
guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER.
Let's silence the deferred probe error.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The Tegra EMC driver now could be compiled as a loadable kernel module.
Currently devfreq driver depends on the EMC/MC drivers in Kconfig, and
thus, devfreq is forced to be a kernel module if EMC is compiled as a
module. This build dependency could be relaxed since devfreq driver
checks MC/EMC presence on probe, allowing kernel configuration where
devfreq is a built-in driver and EMC driver is a loadable module.
This change puts Tegra20 devfreq Kconfig entry on a par with the Tegra30
devfreq entry.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tegra EMC driver was turned into a regular kernel driver, meaning that it
could be compiled as a loadable kernel module now. Hence EMC clock isn't
guaranteed to be available and clk_get("emc") may return -EPROBE_DEFER.
Let's silence the deferred probe error.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The devfreq structure instance contains the governor_name and a governor
instance. When need to show the governor name, better to use the name
of devfreq_governor structure. So, governor_name variable in struct devfreq
is a redundant and unneeded variable. Remove the redundant governor_name
of struct devfreq and then use the name of devfreq_governor instance.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
DEVFREQ supports the default governors like performance, simple_ondemand and
also allows the devfreq driver to add their own governor like tegra30-devfreq.c
according to their requirement. In result, some sysfs attributes are useful
or not useful. Prior to that the user can access all sysfs attributes
regardless of the available attributes.
So, clarify the access permission of sysfs attributes according to governor.
When adding the devfreq governor, can specify the available attribute
information by using DEVFREQ_GOV_ATTR_* constant variable. The user can
read or write the sysfs attributes in accordance to the specified attributes.
When adding the governor, can add the following attributes
according to the governor feature.
[Definition for speific sysfs attributes]
- DEVFREQ_GOV_ATTR_POLLING_INTERVAL to update polling interval for timer.
: /sys/class/devfreq/[devfreq dev name]/polling_interval
- DEVFREQ_GOV_ATTR_TIMER to change the type of timer on either deferrable
or dealyed timer.
: /sys/class/devfreq/[devfreq dev name]/timer
And all devfreq governors have to support the following common attributes.
The common attributes are added to devfreq class by default.
- governor
- available_governors
- available_frequencies
- cur_freq
- target_freq
- min_freq
- max_freq
- trans_stat
[Table of governor attribute flags for devfreq governors]
------------------------------------------------------------------------------
| simple | perfor | power | user | passive | tegra30
| ondemand | mance | save | space| |
------------------------------------------------------------------------------
governor | O | O | O | O | O | O
available_governors | O | O | O | O | O | O
available_frequencies | O | O | O | O | O | O
cur_freq | O | O | O | O | O | O
target_freq | O | O | O | O | O | O
min_freq | O | O | O | O | O | O
max_freq | O | O | O | O | O | O
trans_stat | O | O | O | O | O | O
--------------------------------------------------------
polling_interval | O | X | X | X | X | O
timer | O | X | X | X | X | X
------------------------------------------------------------------------------
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The devfreq governor is able to have the specific flag as follows
in order to implement the specific feature. For example, devfreq allows
user to change the governors on runtime via sysfs interface.
But, if devfreq device uses 'passive' governor, don't allow user to change
the governor. For this case, define the DEVFREQ_GOV_FLAG_IMMUTABLE
and set it to flag of passive governor.
[Definition for governor flag]
- DEVFREQ_GOV_FLAG_IMMUTABLE
: If immutable flag is set, governor is never changeable to other governors.
- DEVFREQ_GOV_FLAG_IRQ_DRIVEN
: Devfreq core won't schedule polling work for this governor if value is set.
[Table of governor flag for devfreq governors]
------------------------------------------------------------------------------
| simple | perfor | power | user | passive | tegra30
| ondemand | mance | save | space| |
------------------------------------------------------------------------------
immutable | X | X | X | X | O | O
interrupt_driven | X(polling)| X | X | X | X | O (irq)
------------------------------------------------------------------------------
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add a tracepoint for frequency changes of devfreq devices and
use it.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
[cw00.choi: Move print position of tracepoint and add more information]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The update_devfreq() and update_passive_devfreq() have the duplicate
code when changing the target frequency on final stage. So, unify
frequency change code to devfreq_update_target() to remove the
duplicate code and to centralize the frequency change code.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
It's safe to enable the ACTMON clock at any time during driver probing,
even if we don't know the state of hardware, because it's used only for
collecting and processing stats, and interrupt is kept disabled. This
allows us to slightly improve code which performs initial hardware
resetting by making use of a single reset_control_reset() instead of
assert/deassert pair. Secondly, a potential error of the reset-control
API is handled nicely now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Previously, devfreq core support 'devfreq-events' property in order to get
the devfreq-event device by phandle. But, 'devfreq-events' property name is
not proper on devicetree binding because this name doesn't mean
the any h/w attribute.
The devfreq-event core hand over the rights to decide the property name
for getting the devfreq-event device on devicetree. Each devfreq-event driver
will decide the property name on devicetree binding and then pass
the their own property name to devfreq_event_get_edev_by_phandle function.
And change the prototype of devfreq_event_get_edev_count function
because of used deprecated 'devfreq-events' property.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Previously, devfreq core support 'devfreq' property in order to get
the devfreq device by phandle. But, 'devfreq' property name is not proper
on devicetree binding because this name doesn't mean the any h/w attribute.
The devfreq core hand over the right to decide the property name
for getting the devfreq device on devicetree. Each devfreq driver
will decide the property name on devicetree binding and pass
the their own property name to devfreq_get_devfreq_by_phandle function.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Split off part of devfreq_get_devfreq_by_phandle into a separate
function. This allows callers to fetch devfreq instances by enumerating
devicetree instead of explicit phandles.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[cw00.choi: Export devfreq_get_devfreq_by_node function and
add function to devfreq.h when CONFIG_PM_DEVFREQ is enabled.]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The commit 4dc3bab868 ("PM / devfreq: Add support delayed timer for
polling mode") supports the delayed timer but this commit missed
the adding the timer type to devfreq_summary debugfs node.
Add the timer type to devfreq_summary debugfs.
Fixes: 4dc3bab868 ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix the wrong grammar at the end of code line by using semicolon.
Cc: stable vger.kernel.org
Fixes: 490a421bc5 ("PM / devfreq: Add debugfs support with devfreq_summary file")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The sysfs attr interface used eithere 'df' or 'devfreq' for devfreq instance
name. In order to keep the consistency and to improve the readabilty,
unify the instance name as 'df'. Add add the missing conditional statement
to prevent the fault.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Until now, the devfreq driver using polling mode like simple_ondemand
governor have used only deferrable timer for reducing the redundant
power consumption. It reduces the CPU wake-up from idle due to polling mode
which check the status of Non-CPU device.
But, it has a problem for Non-CPU device like DMC device with DMA operation.
Some Non-CPU device need to do monitor continuously regardless of CPU state
in order to decide the proper next status of Non-CPU device.
So, add support the delayed timer for polling mode to support
the repetitive monitoring. The devfreq driver and user can select
the kind of timer on either deferrable and delayed timer.
For example, change the timer type of DMC device
based on Exynos5422-based Odroid-XU3 as following:
- If want to use deferrable timer as following:
echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer
- If want to use delayed timer as following:
echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The word 'descriptor' is misspelled throughout the tree.
Fix it up accordingly:
decriptors -> descriptors
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Booting a recent kernel on a rk3399-based system (nanopc-t4),
equipped with a recent u-boot and ATF results in an Oops due
to a NULL pointer dereference.
This turns out to be due to the rk3399-dmc driver looking for
an *undocumented* property (rockchip,pmu), and happily using
a NULL pointer when the property isn't there.
Instead, make most of what was brought in with 9173c5ceb0
("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters
to TF-A.") conditioned on finding this property in the device-tree,
preventing the driver from exploding.
Cc: stable@vger.kernel.org
Fixes: 9173c5ceb0 ("PM / devfreq: rk3399_dmc: Pass ODT and auto power down parameters to TF-A.")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Instead of warning when mutex_is_locked(), just use the lockdep
framework. The code is smaller and checks could be disabled for
production environments (it is useful only during development).
Put asserts at beginning of function, even before validating arguments.
The behavior of update_devfreq() is now changed because lockdep assert
will only print a warning, not return with EINVAL.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix inconsistent IS_ERR and PTR_ERR in imx_bus_init_icc().
The proper pointer to be passed as argument to PTR_ERR() is
priv->icc_pdev.
This bug was detected with the help of Coccinelle.
Fixes: 16c1d2f1b0bd ("PM / devfreq: imx: Register interconnect device")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
[cw00.choi: Edit the patch title from 'imx' to 'imx-bus']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
GCC produces this warning when kernel compiled using `make W=1`:
warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
772 | strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN);
The strncpy doesn't take care of NULL-termination of the destination
buffer, while the strscpy does.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is no single device which can represent the imx interconnect.
Instead of adding a virtual one just make the main &noc act as the
global interconnect provider.
The imx interconnect provider driver will scale the NOC and DDRC based
on bandwidth request. More scalable nodes can be added in the future,
for example for audio/display/vpu/gpu NICs.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add initial support for dynamic frequency switching on pieces of the imx
interconnect fabric.
All this driver does is set a clk rate based on an opp table, it does
not map register areas.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
We're taking into account both HW memory-accesses + CPU activity based on
current CPU's frequency. For memory-accesses there is a kind of hysteresis
in a form of "boosting" which is managed by the tegra30-devfreq driver.
If current HW memory activity is higher than activity judged based of the
CPU's frequency, then there is no need to schedule cpufreq_update_work
because the result of the work will be a NO-OP. And thus,
tegra_actmon_cpufreq_contribution() should return 0, meaning that at the
moment CPU frequency doesn't contribute anything to the final decision
about required memory clock rate.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The dev_pm_qos_remove_request function can return 1 if
"aggregated constraint value has changed" so only negative values should
be reported as errors.
Fixes: 27dbc542f6 ("PM / devfreq: Use PM QoS for sysfs min/max_freq")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
'govenror' was used in place of 'governor'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
DEVFREQ_GOV_INTERVAL event indicates that update the interval
for polling mode of devfreq device. But, this event name doesn't
specify exactly what to do.
Change DEVFREQ_GOV_INTERVAL event name to DEVFREQ_GOV_UPDATE_INTERVAL
which specifies what to do by event name.
And modify the function name to DEVFREQ_GOV_UPDATE_INTERVAL
with 'devfreq_' prefix + verb + object as following:
- devfreq_interval_update -> devfreq_updatee_interval
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Remove unneeded extern keyword from devfreq-related header file
and adjust the indentation of function parameter to keep the
consistency in header file
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Based on commit aa7c352f98 ("PM / devfreq: Define the constant governor
name"), use constant name for userspace governor.
Signed-off-by: pierre Kuo <vichy.kuo@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This reverts commit 4585fbcb53.
The name changing as devfreq(X) breaks some user space applications,
such as Android HAL from Unisoc and Hikey [1].
The device name will be changed unexpectly after every boot depending
on module init sequence. It will make trouble to setup some system
configuration like selinux for Android.
So we'd like to revert it back to old naming rule before any better
way being found.
[1] https://lkml.org/lkml/2018/5/8/1042
Cc: John Stultz <john.stultz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Orson Zhai <orson.unisoc@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Adding an error log makes it easier to trace the function's error path.
Because the error code may be rewritten on return, print error code here.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The exynos_bus_profile_init process may fail, but the devfreq event device
remains enabled. Call devfreq_event_disable_edev on the error return path.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The probe process may fail, but the devfreq event device remains
enabled. Call devfreq_event_disable_edev on the error return path.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The IMX_SIP_DDR_DVFS_WAIT_CHANGE and IMX_SIP_DDR_FREQ_SET_HIGH defines
are not used so they can be removed.
Fixes: 518e99e2a22e ("PM / devfreq: Add dynamic scaling for imx8m ddr controller")
Reported-by: Shawn Guo <shawn.guo@kernel.org>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Improve code readability by changing the goto statements
as well as eliminating a few more goto statements (related to return
paths). Moreover, remove unused header file and adds a missing <linux/of.h>.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
[cw00.choi: Edit patch title and description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ
and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ
used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent
the build break.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
of_node_put() needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Fix kernel-doc warnings in devfreq files.
Also fix a typo.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds a new exynos_bus_profile_init_passive()
extracted from exynos_bus_probe() for devfreq device using passive governor.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
[cw00.choi: Edit description to indicate that function is for devfreq device
using passive governor]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds a new exynos_bus_profile_init() extracted
from exynos_bus_probe() for devfreq device using simple_ondemand governor
like parent devfreq device.
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
[cw00.choi: Edit description to indicate that new function is
for parent devfreq device]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Declaration of DEVICE_ATTR_RW(min_freq) is placed after function
max_freq_store. Move it to the correct place after min_freq_show.
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Count time and transitions between devfreq frequencies in separate
struct devfreq_stats for improved code readability and maintenance.
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[cw00.choi: Fix the merge conflict in trasn_stat_store
and use 'devfreq->stats.*' style for consistent coding style
and restore the clean-up code of 'devfreq->profile->*']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add clearing transition table and time in states devfreq statistics
by writing 0 (zero) to trans_stat file in devfreq sysfs. An example use
is like following:
echo 0 > /sys/class/devfreq/devfreqX/trans_stat
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
[cw00.choi: Edit return value if entering the wrong value for reset
and use arrary3_size() to get the size of 3-dimensional array]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Change time stats counting to bigger type by using 64-bit jiffies.
This will make devfreq stats code look similar to cpufreq stats and
prevents overflow (for HZ = 1000 after 49.7 days).
Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The commit 4585fbcb53 ("PM / devfreq: Modify the device name as devfreq(X) for
sysfs") changed the node name to devfreq(x). After this commit, it is not
possible to get the device name through /sys/class/devfreq/devfreq(X)/*.
Add new name attribute in order to get device name.
Cc: stable@vger.kernel.org
Fixes: 4585fbcb53 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add driver for dynamic scaling the DDR Controller on imx8m chips. Actual
frequency switching is implemented inside TF-A, this driver wraps the
SMC calls and synchronizes the clk tree.
The DRAM clocks on imx8m have the following structure (abridged):
+----------+ |\ +------+
| dram_pll |-------|M| dram_core | |
+----------+ |U|---------->| D |
/--|X| | D |
dram_alt_root | |/ | R |
| | C |
+---------+ | |
|FIX DIV/4| | |
+---------+ | |
composite: | | |
+----------+ | | |
| dram_alt |----/ | |
+----------+ | |
| dram_apb |-------------------->| |
+----------+ +------+
The dram_pll is used for higher rates and dram_alt is used for lower
rates. The dram_alt and dram_apb clocks are "imx composite" and their
parent can also be modified.
This driver will prepare/enable the new parents ahead of switching (so
that the expected roots are enabled) and afterwards it will call
clk_set_parent to ensure the parents in clock framework are up-to-date.
The driver relies on dram_pll dram_alt and dram_apb being marked with
CLK_GET_RATE_NOCACHE for rate updates.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
[cw00.choi: Edit the COMPILE_TEST module dependency in Kconfig]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Putting a 'struct devfreq_event_dev' object on the stack is generally
a bad idea and here it leads to a warnig about potential stack overflow:
drivers/devfreq/event/exynos-ppmu.c:643:12: error: stack frame size of 1040 bytes in function 'exynos_ppmu_probe' [-Werror,-Wframe-larger-than=]
There is no real need for the device structure, only the string inside
it, so add an internal helper function that simply takes the string
as its argument and remove the device structure.
Fixes: 1dd62c66d3 ("PM / devfreq: events: extend events by type of counted data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[cw00.choi: Fix the issue from 'desc->name' to 'desc[j].name']
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Compile-testing this driver fails if CONFIG_COMMON_CLK is not set:
drivers/devfreq/tegra30-devfreq.o: In function `tegra_devfreq_target':
tegra30-devfreq.c:(.text+0x164): undefined reference to `clk_set_min_rate'
Fixes: 35f8dbc727 ("PM / devfreq: tegra: Enable COMPILE_TEST for the driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
CONFIG_PM_OPP is already selected by CONFIG_PM_DEVFREQ
since commit b9c69e0432 ("PM / devfreq: Add dependency on PM_OPP").
This means that individual drivers shouldn't "select PM_OPP" explicitly.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[cw00.choi: Edit the patch title]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Switch the handling of min_freq and max_freq from sysfs to use the
dev_pm_qos_request interface.
Since PM QoS handles frequencies as kHz this change reduces the
precision of min_freq and max_freq. This shouldn't introduce problems
because frequencies which are not an integer number of kHz are likely
not an integer number of Hz either.
Try to ensure compatibility by rounding min values down and rounding
max values up.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
[cw00.choi: Return -EAGAIN instead of -EINVAL if dev_pm_qos is inactive]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Register notifiers with the PM QoS framework in order to respond to
requests for DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY.
No notifiers are added by this patch but PM QoS constraints can be
imposed externally (for example from other devices).
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Right now devfreq_dev_release will print a warning and abort the rest of
the cleanup if the devfreq instance is not part of the global
devfreq_list. But this is a valid scenario, for example it can happen if
the governor can't be found or on any other init error that happens
after device_register.
Initialize devfreq->node to an empty list head in devfreq_add_device so
that list_del becomes a safe noop inside devfreq_dev_release and we can
continue the rest of the cleanup.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Moving handling of min/max freq to a single function and call it from
update_devfreq and for printing min/max freq values in sysfs.
This changes the behavior of out-of-range min_freq/max_freq: clamping
is now done at evaluation time. This means that if an out-of-range
constraint is imposed by sysfs and it later becomes valid then it will
be enforced.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The devfreq_notifier_call functions will update scaling_min_freq and
scaling_max_freq when the OPP table is updated.
If fetching the maximum frequency fails then scaling_max_freq remains
set to zero which is confusing. Set to ULONG_MAX instead so we don't
need special handling for this case in other places.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Notifier callbacks shouldn't return negative errno but one of the
NOTIFY_OK/DONE/BAD values.
The OPP core will ignore return values from notifiers but returning a
value that matches NOTIFY_STOP_MASK will stop the notification chain.
Fix by always returning NOTIFY_OK.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Commit 2abb0d5268 ("PM / devfreq: Lock devfreq in trans_stat_show")
revealed a missing locking while calling devfreq_update_status() function
during suspend/resume cycle.
Code analysis revealed that devfreq_set_target() function was called
without needed locks held for setting device specific suspend_freq if such
has been defined. This patch fixes that by adding the needed locking, what
fixes following kernel warning on Exynos4412-based OdroidU3 board during
system suspend:
PM: suspend entry (deep)
Filesystems sync: 0.002 seconds
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1385 at drivers/devfreq/devfreq.c:204 devfreq_update_status+0xc0/0x188
Modules linked in:
CPU: 2 PID: 1385 Comm: rtcwake Not tainted 5.4.0-rc6-next-20191111 #6848
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0112588>] (unwind_backtrace) from [<c010e070>] (show_stack+0x10/0x14)
[<c010e070>] (show_stack) from [<c0afb010>] (dump_stack+0xb4/0xe0)
[<c0afb010>] (dump_stack) from [<c01272e0>] (__warn+0xf4/0x10c)
[<c01272e0>] (__warn) from [<c01273a8>] (warn_slowpath_fmt+0xb0/0xb8)
[<c01273a8>] (warn_slowpath_fmt) from [<c07d105c>] (devfreq_update_status+0xc0/0x188)
[<c07d105c>] (devfreq_update_status) from [<c07d2d70>] (devfreq_set_target+0xb0/0x15c)
[<c07d2d70>] (devfreq_set_target) from [<c07d3598>] (devfreq_suspend+0x2c/0x64)
[<c07d3598>] (devfreq_suspend) from [<c05de0b0>] (dpm_suspend+0xa4/0x57c)
[<c05de0b0>] (dpm_suspend) from [<c05def74>] (dpm_suspend_start+0x98/0xa0)
[<c05def74>] (dpm_suspend_start) from [<c0195b58>] (suspend_devices_and_enter+0xec/0xc74)
[<c0195b58>] (suspend_devices_and_enter) from [<c0196a20>] (pm_suspend+0x340/0x410)
[<c0196a20>] (pm_suspend) from [<c019480c>] (state_store+0x6c/0xc8)
[<c019480c>] (state_store) from [<c033fc50>] (kernfs_fop_write+0x10c/0x228)
[<c033fc50>] (kernfs_fop_write) from [<c02a6d3c>] (__vfs_write+0x30/0x1d0)
[<c02a6d3c>] (__vfs_write) from [<c02a9afc>] (vfs_write+0xa4/0x180)
[<c02a9afc>] (vfs_write) from [<c02a9d58>] (ksys_write+0x60/0xd8)
[<c02a9d58>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed3d7fa8 to 0xed3d7ff0)
...
irq event stamp: 9667
hardirqs last enabled at (9679): [<c0b1e7c4>] _raw_spin_unlock_irq+0x20/0x58
hardirqs last disabled at (9698): [<c0b16a20>] __schedule+0xd8/0x818
softirqs last enabled at (9694): [<c01026fc>] __do_softirq+0x4fc/0x5fc
softirqs last disabled at (9719): [<c012fe68>] irq_exit+0x16c/0x170
---[ end trace 41ac5b57d046bdbc ]---
------------[ cut here ]------------
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
MCCPU boosts up very aggressively by 800% and boosts down very mildly by
10%. This doesn't work well when system is idling because the very slow
de-boosting results in lots of consecutive-down interrupts, in result
memory stays clocked high and CPU doesn't enter deepest idling state
instead of keeping memory at lowest freq and having CPU cluster turned
off. A more faster de-boosting fixes the case of idling system and doesn't
affect the case of an active system.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The ACTMON governor is interrupt-driven and currently hardware's polling
interval is fixed to 16ms in the driver. Devfreq supports variable polling
interval by the generic governors, let's re-use the generic interface for
changing of the polling interval. Now the polling interval can be changed
dynamically via /sys/class/devfreq/devfreq0/polling_interval.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Currently interrupt-driven governors (like NVIDIA Tegra30 ACTMON governor)
are used to set polling_ms=0 in order to avoid periodic polling of device
status by devfreq core. This means that polling interval can't be changed
by userspace for such governors.
The new governor flag allows interrupt-driven governors to convey that
devfreq core shouldn't perform polling of device status and thus generic
devfreq polling interval could be supported by these governors now.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The dependency threshold designates a memory activity level below which
CPU's frequency isn't accounted. Currently the threshold is given in
"memory cycle" units and that value depends on the polling interval which
is fixed to 12ms in the driver. Later on we'd want to add support for a
variable polling interval and thus the threshold value either needs to be
scaled in accordance to the polling interval or it needs to be represented
in a units that do not depend on the polling interval.
It is nicer to have threshold value being defined independently of the
polling interval, thus this patch converts the dependency threshold units
from "cycle" to "kHz". Having this change as a separate-preparatory patch
will make easier to follow further patches.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Consecutive interrupts should be disabled when boosting is completed.
Currently the disabling of "lower" interrupt happens only for MCCPU
monitor that uses dependency threshold, but even in a case of MCCPU the
interrupt isn't getting disabled if CPU's activity is above the threshold.
This results in a lot of dummy interrupt requests. The boosting feature is
used by both MCCPU and MCALL, boosting should be stopped once it reaches 0
for both of the monitors and regardless of the activity level.
The boosting stops to grow once the maximum limit is hit and thus the
"upper" interrupt needs to be disabled when the limit is reached.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Consecutive up/down interrupt-bit is set in the interrupt status register
only if that interrupt was previously enabled. Thus enabling the already
enabled interrupt doesn't do much for us.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
It's not very correct to include mod_devicetable.h for the OF device
drivers and of_device.h should be included instead.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The consecutive-down event tells that we should perform frequency
de-boosting, but boosting is in a reset state on start and hence the
event won't do anything useful for us and it will be just a dummy
interrupt request.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Governor could be stopped while boosting is active. We have assumption
that everything is reset on governor's restart, including the boosting
value, which was missed.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is no point in receiving of the notifications while governor is
stopped, let's keep them disabled like we do for the CPU freq-change
notifications. This also fixes a potential use-after-free bug if
notification happens after device's removal.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The CPU's client need to take into account that CPUFreq may change
while memory activity not, staying high. Thus an appropriate frequency
notifier should be used in addition to the clk-notifier.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Part of the code uses Hz units and the other kHz, let's switch to kHz
everywhere for consistency. A small benefit from this change (besides
code's cleanup) is that now powertop utility correctly displays devfreq's
stats, for some reason it expects them to be in kHz.
Tested-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is another kHz-conversion bug in the code, resulting in integer
overflow. Although, this time the resulting value is 4294966296 and it's
close to ULONG_MAX, which is okay in this case.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is no need in a write-barrier now, given that interrupt masking is
handled by CPU's GIC now. Hence we know exactly that interrupt won't fire
after stopping the devfreq's governor. In other cases we don't care about
potential buffering of the writes to hardware and thus there is no need to
stall CPU.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is no real need to keep interrupt always-enabled, will be nicer
to keep it disabled while governor is inactive.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
IRQ numbers are always positive, hence the corresponding variable should
be unsigned to keep types consistent. This is a minor change that cleans
up code a tad more.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The error code is propagated to the caller, so there is no need to keep
it additionally in the unused variable.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
There is no locking in this sysfs show function so stats printing can
race with a devfreq_update_status called as part of freq switching or
with initialization.
Also add an assert in devfreq_update_status to make it clear that lock
must be held by caller.
Fixes: 39688ce6fa ("PM / devfreq: account suspend/resume for stats")
Cc: stable@vger.kernel.org
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The governor is initialized after sysfs attributes become visible so in
theory the governor field can be NULL here.
Fixes: bcf23c79c4 ("PM / devfreq: Fix available_governor sysfs")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Before creating a new devfreq device devfreq_add_device() checks
if there is already a devfreq dev associated with the requesting
device (parent). If that's the case the function rejects to create
another devfreq dev for that parent and logs an error. The error
message is very unspecific, make it a bit more explicit.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The recent commit of
PM / devfreq: passive: Use non-devm notifiers
had incurred compiler warning, "unused variable 'dev'".
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The devfreq passive governor registers and unregisters devfreq
transition notifiers on DEVFREQ_GOV_START/GOV_STOP using devm wrappers.
If devfreq itself is registered with devm then a warning is triggered on
rmmod from devm_devfreq_unregister_notifier. Call stack looks like this:
devm_devfreq_unregister_notifier+0x30/0x40
devfreq_passive_event_handler+0x4c/0x88
devfreq_remove_device.part.8+0x6c/0x9c
devm_devfreq_dev_release+0x18/0x20
release_nodes+0x1b0/0x220
devres_release_all+0x78/0x84
device_release_driver_internal+0x100/0x1c0
driver_detach+0x4c/0x90
bus_remove_driver+0x7c/0xd0
driver_unregister+0x2c/0x58
platform_driver_unregister+0x10/0x18
imx_devfreq_platdrv_exit+0x14/0xd40 [imx_devfreq]
This happens because devres_release_all will first remove all the nodes
into a separate todo list so the nested devres_release from
devm_devfreq_unregister_notifier won't find anything.
Fix the warning by calling the non-devm APIS for frequency notification.
Using devm wrappers is not actually useful for a governor anyway: it
relies on the devfreq core to correctly match the GOV_START/GOV_STOP
notifications.
Fixes: 996133119f ("PM / devfreq: Add new passive governor")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reuse opp core code for setting bus clock and voltage. As a side
effect this allow usage of coupled regulators feature (required
for boards using Exynos5422/5800 SoCs) because dev_pm_opp_set_rate()
uses regulator_set_voltage_triplet() for setting regulator voltage
while the old code used regulator_set_voltage_tol() with fixed
tolerance. This patch also removes no longer needed parsing of DT
property "exynos,voltage-tolerance" (no Exynos devfreq DT node uses
it). After applying changes both functions exynos_bus_passive_target()
and exynos_bus_target() have the same code, so remove
exynos_bus_passive_target(). In exynos_bus_probe() replace it with
exynos_bus_target.
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Regulators should be enabled before clocks to avoid h/w hang. This
require change in exynos_bus_probe() to move exynos_bus_parse_of()
after exynos_bus_parent_parse_of() and change in error handling.
Similar change is needed in exynos_bus_exit() where clock should be
disabled before regulators.
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Correct the documentation for devm_devfreq_remove_device() argument.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
This patch adds posibility to choose what type of data should be counted
by the PPMU counter. Now the type comes from DT where the event has been
defined. When there is no 'event-data-type' the default value is used,
which is 'read+write data in bytes'.
It is needed when you want to know not only read+write data bytes but
i.e. only write data in byte, or number of read requests, etc.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
[Updated property by MyungJoo. data_type --> event_type]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
The patch changes the way how the 'ops' gets populated for different
device versions. The matching function now uses 'of_device_id' in order
to identify the device type.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Compile-testing the new driver on platforms without CONFIG_COMMON_CLK
leads to a link error:
drivers/devfreq/tegra20-devfreq.o: In function `tegra_devfreq_target':
tegra20-devfreq.c:(.text+0x288): undefined reference to `clk_set_min_rate'
Add a dependency on COMMON_CLK to avoid this.
Fixes: 1d39ee8dad6d ("PM / devfreq: Introduce driver for NVIDIA Tegra20")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Define new performance events supported by Exynos5422 SoC counters.
The counters are built-in in Dynamic Memory Controller and provide
information regarding memory utilization.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>