The IR device on Hi3796CV300 SoC is mostly same as hix5hd2, except the
following two things.
- IR_CLK offset is 0x60 instead of 0x48.
- It needs to set an extra bit in IR_ENABLE register to enable IR.
The following changes are made to deal with them.
- Define a SoC specific data to accommodate IR_CLK offset and the flag
telling requirement of extra enable bit.
- Create function hix5hd2_ir_enable() to handle IR enabling. The original
hix5hd2_ir_enable() is all about managing IR clock, so gets renamed
to hix5hd2_ir_clk_enable().
- Device table hix5hd2_ir_table[] gets moved forward, as it's being
used by hix5hd2_ir_probe() now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It documents "hisilicon,hi3796cv300-ir" compatible for Hi3796CV300 IR
device.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Resetting buf without resetting pusi_seen at a channel-switch can lead
to copying the rest of a section to the start of buf, but treating it as
a complete section, when the next pusi arrives.
EIT-sections starting without valid header were randomly received during
an EIT-scan on a transponder.
Signed-off-by: Johann Friedrichs <johann.friedrichs@web.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following scripts/checkpatch.pl errors:
ERROR: space required before the open parenthesis '('
+ switch(input) {
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix a few minor typos throughout the document without changing the
meaning of the sentences.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes the following scripts/checkpatch.pl error:
ERROR: open brace '{' following function definitions go on the next line
+static int as102_fe_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *settings) {
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replaces printk with pr_err to fix warnings from checkpatch.pl
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix checkpatch.pl error by adding a blank line
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change foo* bar to foo *bar to avoid ERROR: POINTER_LOCATION in checkpatch
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_signal_strength(struct dvb_frontend* fe, u16* strength)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_snr(struct dvb_frontend* fe, u16* snr)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_sleep(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+static int dvb_dummy_fe_init(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+static void dvb_dummy_fe_release(struct dvb_frontend* fe)
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = fe->demodulator_priv;
ERROR: "foo* bar" should be "foo *bar"
+struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void)
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
ERROR: "foo* bar" should be "foo *bar"
+ struct dvb_dummy_fe_state* state = NULL;
remove 'extern' keyword from declaration
Fix CHECK:AVOID_EXTERNS: extern prototypes should be avoided in .h files
by removing it.
Fix long lines
Break long lines into smaller ones to improve readability.
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_ofdm_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_qpsk_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ memcpy(&state->frontend.ops, &dvb_dummy_fe_qam_ops, sizeof(struct dvb_frontend_ops));
WARNING: line over 80 characters
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
WARNING: line over 80 characters
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
WARNING: line over 80 characters
+ FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
WARNING: line over 80 characters
+ .symbol_rate_min = (57840000 / 2) / 6
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
drivers/media/dvb-frontends/dib0070.c:192:52: warning: format specifies type 'short' but the argument has type 's8' (aka 'signed char') [-Wformat]
dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV\n", state->captrim, adc, (u32) adc*(u32)1800/(u32)1024);
~~~ ^~~~~~~~~~~~~~
%hhd
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:203:59: warning: format specifies type 'short' but the argument has type 's8' (aka 'signed char') [-Wformat]
dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)\n", state->captrim, adc, state->adc_diff);
~~~ ^~~~~~~~~~~~~~
%hhd
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:367:46: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("Tuning for Band: %hd (%d kHz)\n", band, freq);
~~~ ^~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:445:39: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("REFDIV: %hd, FREF: %d\n", REFDIV, FREF);
~~~ ^~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:447:57: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("Num: %hd, Den: %hd, SD: %hd\n", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
~~~ ^~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:447:62: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
dprintk("Num: %hd, Den: %hd, SD: %hd\n", (u16) Rest, Den, (state->lo4 >> 12) & 0x1);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~
%d
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:448:33: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("HFDIV code: %hd\n", state->current_tune_table_index->hfdiv);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:449:27: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("VCO = %hd\n", state->current_tune_table_index->vco_band);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
drivers/media/dvb-frontends/dib0070.c:450:40: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("VCOF: ((%hd*%d) << 1))\n", state->current_tune_table_index->vco_multi, freq);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
%hhu
drivers/media/dvb-frontends/dib0070.c:30:22: note: expanded from macro 'dprintk'
__func__, ##arg); \
^~~
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
drivers/media/dvb-frontends/dib7000p.c:918:37: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("SPLIT %p: %hd\n", demod, agc_split);
~~~ ^~~~~~~~~
%hhu
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
drivers/media/dvb-frontends/dib7000m.c:811:38: warning: format specifies type 'short' but the argument has type 'u8' (aka 'unsigned char') [-Wformat]
dprintk("SPLIT %p: %hd\n", demod, agc_split);
~~~ ^~~~~~~~~
%hhu
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl4SYegeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG4m4H+QGCUN8SXN+2B+0/
BfzOf7PFoKzAx3NwDbJQIZqhSl+Zfa4n3VGPEF8sXsvoQgdYvuJnS/5JiAZ9iRIH
HAfFzegzQ3mCl8Du+SqCvQKs2Jt4OMCX62KGRebRBhpoKfZdwmN7n7pn9lWO771K
9rxTpeItXhmK46jOFRbi5oyQfmkfSfyUN1b9CB53FXFS+ZDkDNA7QQiIYnKOD7SZ
RrL7czhZ580QOC61qOlnz1GIhRzvU5SXg4OtuI3YfoOJRY5FKC3YtOgLReT0vPs+
vEhAyP93upVXIhqm10WHNjd4t4a45Vy5ff64uFsQ9QV4nnqsC2C70YwWbVDdtz/W
Lm0mvE8=
=NECs
-----END PGP SIGNATURE-----
Merge tag 'v5.5-rc5' into patchwork
Linux 5.5-rc5
* tag 'v5.5-rc5': (1006 commits)
Linux 5.5-rc5
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
...
Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation
-----BEGIN PGP SIGNATURE-----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=8HSd
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:
- Fix function graph trace support
- Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"
- Use __pa_symbol() when computing the physical address of a kernel
symbol, rather than __pa()
- Mark the RISC-V port as supporting GCOV
One DT addition:
- Describe the L2 cache controller in the FU540 DT file
One documentation update:
- Add patch acceptance guideline documentation"
* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: riscv: add patch acceptance guidelines
riscv: prefix IRQ_ macro names with an RV_ namespace
clocksource: riscv: add notrace to riscv_sched_clock
riscv: ftrace: correct the condition logic in function graph tracer
riscv: dts: Add DT support for SiFive L2 cache controller
riscv: gcov: enable gcov for RISC-V
riscv: mm: use __pa_symbol for kernel symbols
Formalize, in kernel documentation, the patch acceptance policy for
arch/riscv. In summary, it states that as maintainers, we plan to
only accept patches for new modules or extensions that have been
frozen or ratified by the RISC-V Foundation.
We've been following these guidelines for the past few months. In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.
Based on a suggestion from Matthew Wilcox, we also add a link to this
file to Documentation/process/index.rst, to make this document easier
to find. The format of this document has also been changed to align
to the format outlined in the maintainer entry profiles, in accordance
with comments from Jon Corbet and Dan Williams.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Krste Asanovic <krste@berkeley.edu>
Cc: Andrew Waterman <waterman@eecs.berkeley.edu>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hexagon: define ioremap_uc
ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
mm/hugetlb: defer freeing of huge pages if in non-task context
mm/gup: fix memory leak in __gup_benchmark_ioctl
mm/oom: fix pgtables units mismatch in Killed process message
fs/posix_acl.c: fix kernel-doc warnings
hexagon: work around compiler crash
hexagon: parenthesize registers in asm predicates
fs/namespace.c: make to_mnt_ns() static
fs/nsfs.c: include headers for missing declarations
fs/direct-io.c: include fs/internal.h for missing prototype
mm: move_pages: return valid node id in status if the page is already on the target node
memcg: account security cred as well to kmemcg
kcov: fix struct layout for kcov_remote_arg
mm/zsmalloc.c: fix the migrated zspage statistics.
mm/memory_hotplug: shrink zones when offlining memory
- performance regression: only get a label reference if the fast
path check fails
- fix aa_xattrs_match() may sleep while holding a RCU lock
- fix bind mounts aborting with -ENOMEM
-----BEGIN PGP SIGNATURE-----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=uw+S
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor fixes from John Johansen:
- performance regression: only get a label reference if the fast path
check fails
- fix aa_xattrs_match() may sleep while holding a RCU lock
- fix bind mounts aborting with -ENOMEM
* tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
apparmor: only get a label reference if the fast path check fails
apparmor: fix bind mounts aborting with -ENOMEM
aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a
context protected by an rcu_read_lock. This can not be done as
vfs_getxattr_alloc() may sleep regardles of the gfp_t value being
passed to it.
Fix this by breaking the rcu_read_lock on the policy search when the
xattr match feature is requested and restarting the search if a policy
changes occur.
Fixes: 8e51f9087f ("apparmor: Add support for attaching profiles via xattr, presence and value")
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John Johansen <john.johansen@canonical.com>
- Fill the struct cacheinfo shared_cpu_map field with sensible values,
notably avoiding issues with perf which was unhappy in the absence of
these values.
- A boot fix for Loongson 2E & 2F machines which was fallout from some
refactoring performed this cycle.
- A Kconfig dependency fix for the Loongson CPU HWMon driver.
- A couple of VDSO fixes, ensuring gettimeofday() behaves appropriately
for kernel configurations that don't include support for a clocksource
the VDSO can use & fixing the calling convention for the n32 & n64
VDSOs which would previously clobber the $gp/$28 register.
- A build fix for vmlinuz compressed images which were inappropriately
building with -fsanitize-coverage despite not being part of the kernel
proper, then failing to link due to the missing
__sanitizer_cov_trace_pc() function.
- A couple of eBPF JIT fixes, including disabling it for MIPS32 due to a
large number of issues with the code generated there & reflecting ISA
dependencies in Kconfig to enforce that systems which don't support
the JIT must include the interpreter.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXhDvJxYccGF1bGJ1cnRv
bkBrZXJuZWwub3JnAAoJED6nn6y1dQDdULcBAJCyB5cBMSvl14q7jEICUKIZacaW
OGYrhvpr6g9Dtg+fAP0WpYbIdY/JsydXlJC97CTm6saI5Oh2TDe6Cnl+kfloBw==
=dadp
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A collection of MIPS fixes:
- Fill the struct cacheinfo shared_cpu_map field with sensible
values, notably avoiding issues with perf which was unhappy in the
absence of these values.
- A boot fix for Loongson 2E & 2F machines which was fallout from
some refactoring performed this cycle.
- A Kconfig dependency fix for the Loongson CPU HWMon driver.
- A couple of VDSO fixes, ensuring gettimeofday() behaves
appropriately for kernel configurations that don't include support
for a clocksource the VDSO can use & fixing the calling convention
for the n32 & n64 VDSOs which would previously clobber the $gp/$28
register.
- A build fix for vmlinuz compressed images which were
inappropriately building with -fsanitize-coverage despite not being
part of the kernel proper, then failing to link due to the missing
__sanitizer_cov_trace_pc() function.
- A couple of eBPF JIT fixes, including disabling it for MIPS32 due
to a large number of issues with the code generated there &
reflecting ISA dependencies in Kconfig to enforce that systems
which don't support the JIT must include the interpreter"
* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Avoid VDSO ABI breakage due to global register variable
MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
MIPS: BPF: Disable MIPS32 eBPF JIT
MIPS: Prevent link failure with kcov instrumentation
MIPS: Kconfig: Use correct form for 'depends on'
mips: Fix gettimeofday() in the vdso library
MIPS: Fix boot on Fuloong2 systems
mips: cacheinfo: report shared CPU map
Because ocfs2_get_dlm_debug() function is called once less here, ocfs2
file system will trigger the system crash, usually after ocfs2 file
system is unmounted.
This system crash is caused by a generic memory corruption, these crash
backtraces are not always the same, for exapmle,
ocfs2: Unmounting device (253,16) on (node 172167785)
general protection fault: 0000 [#1] SMP PTI
CPU: 3 PID: 14107 Comm: fence_legacy Kdump:
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__kmalloc+0xa5/0x2a0
Code: 00 00 4d 8b 07 65 4d 8b
RSP: 0018:ffffaa1fc094bbe8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: d310a8800d7a3faf RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000dc0 RDI: ffff96e68fc036c0
RBP: d310a8800d7a3faf R08: ffff96e6ffdb10a0 R09: 00000000752e7079
R10: 000000000001c513 R11: 0000000004091041 R12: 0000000000000dc0
R13: 0000000000000039 R14: ffff96e68fc036c0 R15: ffff96e68fc036c0
FS: 00007f699dfba540(0000) GS:ffff96e6ffd80000(0000) knlGS:00000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055f3a9d9b768 CR3: 000000002cd1c000 CR4: 00000000000006e0
Call Trace:
ext4_htree_store_dirent+0x35/0x100 [ext4]
htree_dirblock_to_tree+0xea/0x290 [ext4]
ext4_htree_fill_tree+0x1c1/0x2d0 [ext4]
ext4_readdir+0x67c/0x9d0 [ext4]
iterate_dir+0x8d/0x1a0
__x64_sys_getdents+0xab/0x130
do_syscall_64+0x60/0x1f0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f699d33a9fb
This regression problem was introduced by commit e581595ea2 ("ocfs: no
need to check return value of debugfs_create functions").
Link: http://lkml.kernel.org/r/20191225061501.13587-1-ghe@suse.com
Fixes: e581595ea2 ("ocfs: no need to check return value of debugfs_create functions")
Signed-off-by: Gang He <ghe@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org> [5.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If journal is dirty when mount, it will be replayed but jbd2 sb log tail
cannot be updated to mark a new start because journal->j_flag has
already been set with JBD2_ABORT first in journal_init_common.
When a new transaction is committed, it will be recored in block 1
first(journal->j_tail is set to 1 in journal_reset). If emergency
restart happens again before journal super block is updated
unfortunately, the new recorded trans will not be replayed in the next
mount.
The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be
replayed.
This exception happens easily when this lun is used by only one node.
If it is used by multi-nodes, other node will replay its journal and its
journal super block will be updated after recovery like what this patch
does.
ocfs2_recover_node->ocfs2_replay_journal.
The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.
logdump:
Block 0: Journal Superblock
Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2)
Blocksize: 4096 Total Blocks: 32768 First Block: 1
First Commit ID: 13 Start Log Blknum: 1
Error: 0
Feature Compat: 0
Feature Incompat: 2 block64
Feature RO compat: 0
Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
FS Share Cnt: 1 Dynamic Superblk Blknum: 0
Per Txn Block Limit Journal: 0 Data: 0
Block 1: Journal Commit Block
Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK)
Block 2: Journal Descriptor
Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK)
No. Blocknum Flags
0. 587 none
UUID: 00000000000000000000000000000000
1. 8257792 JBD2_FLAG_SAME_UUID
2. 619 JBD2_FLAG_SAME_UUID
3. 24772864 JBD2_FLAG_SAME_UUID
4. 8257802 JBD2_FLAG_SAME_UUID
5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
...
Block 7: Inode
Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809)
FS Generation: 2839773110 (0xa9437fb6)
CRC32: 00000000 ECC: 0000
Type: Regular Attr: 0x0 Flags: Valid
Dynamic Features: (0x1) InlineData
User: 0 (root) Group: 0 (root) Size: 7
Links: 1 Clusters: 0
ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019
atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019
mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019
dtime: 0x0 -- Thu Jan 1 08:00:00 1970
...
Block 9: Journal Commit Block
Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK)
The following is journal recovery log when recovering the upper jbd2
journal when mount again.
syslog:
ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13
Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.
Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.com
Signed-off-by: Kai Li <li.kai4@h3c.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following lockdep splat was observed when a certain hugetlbfs test
was run:
================================
WARNING: inconsistent lock state
4.18.0-159.el8.x86_64+debug #1 Tainted: G W --------- - -
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
__nr_hugepages_store_common+0x11b/0xb30
hugetlb_sysctl_handler_common+0x209/0x2d0
proc_sys_call_handler+0x37f/0x450
vfs_write+0x157/0x460
ksys_write+0xb8/0x170
do_syscall_64+0xa5/0x4d0
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
irq event stamp: 691296
hardirqs last enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60
hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81
softirqs last enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0
softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(hugetlb_lock);
<Interrupt>
lock(hugetlb_lock);
*** DEADLOCK ***
:
Call Trace:
<IRQ>
__lock_acquire+0x146b/0x48c0
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
free_huge_page+0x36f/0xaa0
bio_check_pages_dirty+0x2fc/0x5c0
clone_endio+0x17f/0x670 [dm_mod]
blk_update_request+0x276/0xe50
scsi_end_request+0x7b/0x6a0
scsi_io_completion+0x1c6/0x1570
blk_done_softirq+0x22e/0x350
__do_softirq+0x23d/0xad8
irq_exit+0x23e/0x2b0
do_IRQ+0x11a/0x200
common_interrupt+0xf/0xf
</IRQ>
Both the hugetbl_lock and the subpool lock can be acquired in
free_huge_page(). One way to solve the problem is to make both locks
irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is
held for a linear scan of ALL hugetlb pages during a cgroup reparentling
operation. So it is just too long to have irq disabled unless we can
break hugetbl_lock down into finer-grained locks with shorter lock hold
times.
Another alternative is to defer the freeing to a workqueue job. This
patch implements the deferred freeing by adding a free_hpage_workfn()
work function to do the actual freeing. The free_huge_page() call in a
non-task context saves the page to be freed in the hpage_freelist linked
list in a lockless manner using the llist APIs.
The generic workqueue is used to process the work, but a dedicated
workqueue can be used instead if it is desirable to have the huge page
freed ASAP.
Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of
llist APIs which simplfy the code.
Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the implementation of __gup_benchmark_ioctl() the allocated pages
should be released before returning in case of an invalid cmd. Release
pages via kvfree().
[akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1]
Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com
Fixes: 714a3a1eba ("mm/gup_benchmark.c: add additional pinning methods")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pr_err() expects kB, but mm_pgtables_bytes() returns the number of bytes.
As everything else is printed in kB, I chose to fix the value rather than
the string.
Before:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1878] 1000 1878 217253 151144 1269760 0 0 python
...
Out of memory: Killed process 1878 (python) total-vm:869012kB, anon-rss:604572kB, file-rss:4kB, shmem-rss:0kB, UID:1000 pgtables:1269760kB oom_score_adj:0
After:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1436] 1000 1436 217253 151890 1294336 0 0 python
...
Out of memory: Killed process 1436 (python) total-vm:869012kB, anon-rss:607516kB, file-rss:44kB, shmem-rss:0kB, UID:1000 pgtables:1264kB oom_score_adj:0
Link: http://lkml.kernel.org/r/20191211202830.1600-1-idryomov@gmail.com
Fixes: 70cb6d2677 ("mm/oom: add oom_score_adj and pgtables to Killed process message")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Edward Chron <echron@arista.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warnings in fs/posix_acl.c.
Also fix one typo (setgit -> setgid).
fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
Link: http://lkml.kernel.org/r/29b0dc46-1f28-a4e5-b1d0-ba2b65629779@infradead.org
Fixes: 073931017b ("posix_acl: Clear SGID bit when setting file permissions")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make to_mnt_ns() static to address the following 'sparse' warning:
fs/namespace.c:1731:22: warning: symbol 'to_mnt_ns' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191209234830.156260-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Include linux/proc_fs.h and fs/internal.h to address the following
'sparse' warnings:
fs/nsfs.c:41:32: warning: symbol 'ns_dentry_operations' was not declared. Should it be static?
fs/nsfs.c:145:5: warning: symbol 'open_related_ns' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191209234822.156179-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Include fs/internal.h to address the following 'sparse' warning:
fs/direct-io.c:591:5: warning: symbol 'sb_init_dio_done_wq' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20191209234544.128302-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d716 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not. Account cred->security to kmemcg.
Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes. Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period. This
overhead can adversely impact the isolation on the system.
One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.
Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the layout of kcov_remote_arg the same for 32-bit and 64-bit code.
This makes it more convenient to write userspace apps that can be
compiled into 32-bit or 64-bit binaries and still work with the same
64-bit kernel.
Also use proper __u32 types in uapi headers instead of unsigned ints.
Link: http://lkml.kernel.org/r/9e91020876029cfefc9211ff747685eba9536426.1575638983.git.andreyknvl@google.com
Fixes: eec028c938 ("kcov: remote coverage support")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: "Jacky . Cao @ sony . com" <Jacky.Cao@sony.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.
Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes: 91537fee00 ("mm: add NR_ZSMALLOC to vmstat")
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jinsuk Choi <jjinsuk.choi@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently try to shrink a single zone when removing memory. We use
the zone of the first page of the memory we are removing. If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):
BUG: unable to handle page fault for address: 000000000000353d
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:clear_zone_contiguous+0x5/0x10
Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__remove_pages+0x4b/0x640
arch_remove_memory+0x63/0x8d
try_remove_memory+0xdb/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x70/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x227/0x3a0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x221/0x550
worker_thread+0x50/0x3b0
kthread+0x105/0x140
ret_from_fork+0x3a/0x50
Modules linked in:
CR2: 000000000000353d
Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that. We now
properly shrink the zones, even if we have DIMMs whereby
- Some memory blocks fall into no zone (never onlined)
- Some memory blocks fall into multiple zones (offlined+re-onlined)
- Multiple memory blocks that fall into different zones
Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().
Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bunch of fixes for:
- uninitialized dma_slave_caps access
- virt-dma use after free in vchan_complete()
- driver fixes for ioat, k3dma and jz4780
-----BEGIN PGP SIGNATURE-----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=eXEU
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A bunch of fixes for:
- uninitialized dma_slave_caps access
- virt-dma use after free in vchan_complete()
- driver fixes for ioat, k3dma and jz4780"
* tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
ioat: ioat_alloc_ring() failure handling.
dmaengine: virt-dma: Fix access after free in vchan_complete()
dmaengine: k3dma: Avoid null pointer traversal
dmaengine: dma-jz4780: Also break descriptor chains on JZ4725B
dmaengine: Fix access to uninitialized dma_slave_caps
-----BEGIN PGP SIGNATURE-----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=kakx
-----END PGP SIGNATURE-----
Merge tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes at CEC core to comply with HDMI 2.0 specs and fix some
border cases
- a fix at the transmission logic of the pulse8-cec driver
- one alignment fix on a data struct at ipu3 when built with 32 bits
* tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes
media: pulse8-cec: fix lost cec_transmit_attempt_done() call
media: cec: check 'transmit_in_progress', not 'transmitting'
media: cec: avoid decrementing transmit_queue_sz if it is 0
media: cec: CEC 2.0-only bcast messages were ignored
The A10/A20 Allwinner SoCs have two camera sensor interface blocks,
named CSI0 and CSI1. The two have the same register layouts with
slightly different features:
- CSI0 has an image signal processor (ISP); CSI1 doesn't
- CSI0 can support up to four separate channels under CCIR656;
CSI1 can only support one
- CSI0 can support up to 16-bit wide bus with YUV422;
CSI1 can support up to 24-bit wide bus with YUV444
For now the driver doesn't support wide busses, nor CCIR656. So the
only relevant difference is whether a clock needs to be taken and
enabled for the ISP.
Add structs to record the differences, tie them to the compatible
strings, and deal with the ISP clock. Support for the new CSI1
hardware block is added as well.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On Allwinner SoCs, some high memory bandwidth devices do DMA directly
over the memory bus (called MBUS), instead of the system bus. These
devices include the CSI camera sensor interface, video (codec) engine,
display subsystem, etc.. The memory bus has a different addressing
scheme without the DRAM starting offset.
Deal with this using the "interconnects" property from the device tree,
or if that is not available, set dev->dma_pfn_offset to PHYS_PFN_OFFSET.
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Allwinner camera sensor interface has a different definition of
[HV]sync. While the timing diagram uses the names HSYNC and VSYNC,
the note following the diagram and register names use HREF and VREF.
Combined they imply the hardware uses either [HV]REF or inverted
[HV]SYNC. There are also registers to set horizontal skip lengths
in pixels and vertical skip lengths in lines, also known as back
porches.
Fix the polarity handling by using the opposite polarity flag for
the checks. Also rename `[hv]sync_pol` to `[hv]ref_pol` to better
match the hardware register description.
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CLK_POL field specifies whether data is sampled on the falling or
rising edge of PCLK, not whether the data lines are active high or low.
Evidence of this can be found in the timing diagram labeled "horizontal
size setting and pixel clock timing".
Fix the setting by checking the correct flag, V4L2_MBUS_PCLK_SAMPLE_RISING.
While at it, reorder the three polarity flag checks so HSYNC and VSYNC
are grouped together.
Fixes: 577bbf23b7 ("media: sunxi: Add A10 CSI driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CSI0 block in the Allwinner R40 SoC looks to be the same as the one
in the A20. The register maps line up, and they support the same
features. The R40 appears to support BT.1120 based on the feature
overview, but it is not mentioned anywhere else. Also like the A20, the
ISP is not mentioned, but the CSI special clock needs to be enabled for
the hardware to function. The manual does state that the CSI special
clock is the TOP clock for all CSI hardware, but currently no hardware
exists for us to test if CSI1 also depends on it or not.
Add a compatible string for the CSI0 block in the R40, with the A20
compatible string as a fallback.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The CSI1 block has the same structure and layout as the CSI0 block.
Differences include:
- Only one channel in BT.656 instead of four in CSI0
- 10-bit raw data input vs 8-bit in CSI0
- 24-bit RGB888/YUV444 input vs 16-bit RGB565/YUV422 in CSI0
- No ISP hardware
The hardware found in the A20 is the same as in the A10.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the imgu running mode need user to set by v4l2 ctrl.
However, imgu only support 2 pipes and 2 operation modes - video and
still. This patch make the first imgu subdev running as video and second
one running as still, it will make the user understand easily, it can
also cover current camera use cases requirement. The running mode is set
during subdev registering, no race-condition after change, so it is safe
to change the mode data type to integer.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
From firmware perspective, the main output for each pipe is mandatory
and must be enabled. This patch set the link between imgu subdev and
main output as IMMUTABLE by default.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Shawn Guo
Johann Friedrichs
Daniel W. S. Almeida
Sean Young
Mauro Carvalho Chehab
Linus Torvalds
Paul Walmsley
Zong Li
John Johansen
Nick Desaulniers
Gang He
Kai Li
Waiman Long
Navid Emamdoost
Ilya Dryomov
Randy Dunlap
Eric Biggers
Yang Shi
Shakeel Butt
Andrey Konovalov
Chanho Min
David Hildenbrand
Chen-Yu Tsai
Bingbu Cao